Faymonville Max Trailer 2-Achs-Tiefbett Mit Pendelachsen nakup rabljenega (58.400)

Stanje: rabljeno, največja dovoljena obremenitev: 34.030 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2027, Oprema: ABS, Celoten seznam naših vozil, ki so na voljo takoj ali v kratkem roku, najdete na naši spletni strani. Izvleček iz opreme. Popolna oprema na zahtevo. "Labodji vrat" (swan neck) z zadnjim naklonom cca 750 mm x 10°. 3 pari pritrdilnih obročev (LC 5.000 daN) Trdna lesena obloga, debeline cca 30 mm. Tovorilna površina. Tovorilna površina se po "labodjem vratu" hidravlično dviga in spušča, dolžina cca 2.800 mm, z zadnjim naklonom cca 1.000 mm x 8°. 6 parov pritrdilnih obročev, z možnostjo zlaganja navzven (LC 5.000 daN). 2 para pritrdilnih obročev, z možnostjo zlaganja navzven (LC 10.000 daN). 1 par pritrdilnih obročev, z možnostjo zlaganja navznoter, na centralnem nosilcu spredaj (LC 10.000 daN). Rešetkasta obloga C40/4 (točkovna obremenitev cca 2,3 t na površini cca 20 x 20 cm) nad osmi. Obloga iz valjanega jekla. Dvodelne jeklene rampe. Ena para pocinkanih, dvodelnih jeklenih ramp, okrepljene izvedbe, cca 3.185 + 1.420 x 1.250 mm, z rešetkasto oblogo C40/5 (točkovna obremenitev cca 8 t na površini cca 20 x 20 cm). Rampa z hidravlično dvigljivimi in zlaganimi deli rampe ter hidravličnim dvižnim mehanizmom, maksimalna obremenitev na par: 40.000 kg. V skladu z uredbo 1230/2012/EU se rampe z dolžino, krajšo od 300 mm, v vožnji ne upoštevajo pri izračunu dolžine vozila (16.500 mm). Podporne noge sedelne spojke. JOST podpore sedelne spojke (mehanske) z 2-stopenjsko prestavo za cca 24 t dvižne nosilnosti (cca 50 t preizkusne nosilnosti). Pnevmatike 235/75 R 17.5 3PMSF. TPMS sistem za nadzor tlaka v pnevmatikah, skladno s standardom ECE R 141. Osi. BPW osi in vzmetenje. 2 fiksni osi, 1 os z vodilnim členom. Tehnična nosilnost osi: 12.000 kg na os. Elektro-magnetična blokada za vožnjo nazaj, aktivira se preko prestave za vožnjo nazaj in ročno. Zračno vzmetenje z ventilom za dvig in spuščanje. Zavorna sistema. WABCO zavorna sistema v skladu z evropskimi predpisi z EBS-E (2S2M). Barve. Prikolica RAL 3002 karminsko rdeča. Platišča srebrna. Ponjava v RAL 9006 srebrna. Vključeno. 1 nosilec rezervnega kolesa pod tovorilno površino na desni strani, v smeri vožnje. 2 palčni kraljevski zatič. Ena pocinkana jeklena čelna stena. Na pocinkani priključni letev spredaj, rumeno-rdeče zračne spojke. 4 kosi klinih z nosilcem na čelni steni. 3 višine lesenih plošč. Pocinkane, zložljive podpore pod naklonom tovorilne površine. Višinsko nastavljiva nadgradnja s ponjavo *3.960 mm*. Iijdpszu Ebtsfx Ai Sog Pocinkana čelna stena z mehanizmom za napenjanje za drsno zaveso. Strop blagovne znamke EDSCHA, višinsko nastavljiv za cca 400 mm, premakljiv naprej na aluminijastem profilu strehe (privit na sprednjo in zadnjo steno). Na tovorilni površini 3 pari drsnih letven. Nadgradnja se lahko na zadnji strani na levi in desni strani hidravlično razširi za cca 750 mm. Drsna ponjava z cca 700 mm rezerve v dolžino, z napenjalnimi trakovi v razmaku cca 600 mm. Zgornji rob nadgradnje cca 3.960 mm (obremenjeno). Vožnja z odprto drsno ponjavo ni dovoljena in povzroči poškodbe ponjave. Na valjanem jeklu na "labodjem vratu" in na tovorilni površini, vgrajena plast peska kot zaščita proti zdrsu. Pokrivne plošče za premostitev prostora med rampami in tovorilno površino. Elektro-hidravlična agregat zadaj pod tovorilno površino. Na "labodjem vratu" in na rampah, na levi in desni strani, vsak nosilec za opozorilne table, vključno z vtičnico. Upravljalni ventili za rampe, nameščeni na desni strani prikolice. Rešetkasta obloga na naklonu "labodjega vrata" C30/3 (točkovna obremenitev cca 2 t na površini 20 x 20

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 27.000 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 235/75 R17.5, barva: siv, obratovalna teža: 11.000 kg, Oprema: ABS, Chassis: - Welded steel frame construction with front and rear frame cranks and a lowered bed without rear chamfer - Neck and kingpin plate 225 mm - Lowered bed rated for 25 t point load over 5 m - Outer frame closed to the outside with welded-on lashing rings for securing - Interchangeable 2" king pin - Rear hook-in rail for aluminum ramps Axles and Tyres: - BPW low-loader axles, each with a 10 t axle load, air bellows diameter 360 mm - Air suspension with lifting and lowering function, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights +100 mm - S-cam brakes 300/200 mm, asbestos-free brake pads - Automatic slack adjusters - IVTM tyre pressure monitoring - 9 tyres 235/75 R 17.5, tubeless Steering: - 1st and 2nd axles hydraulically forced steered via fifth wheel coupling Floor: - Multi-layer bonded board floor, 27 mm thick, flush with outer frame and longitudinal beams - Underside reinforced with GRP coating - 12 pairs of lashing rings welded in outer frame (8 pairs RUD 8 t – 6 pairs in the lowered bed as well as one pair each on the gooseneck and at the front of the rear aggregate – 2 pairs of 4 t lashing rings on gooseneck and rear aggregate) - 6 pairs of mushroom anchors in outer frame in the lowered bed - Storage box with lid in the lowered bed floor, front left and right Front Wall: - 25 mm aluminum hollow profiles raised up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding Tarpaulins: - Tarpaulin curtains on both sides with integrated vertical and horizontal belts (approx. 600 mm spacing) and stainless steel tension locks - Adjustable tarp straps (overcentre) up to loading width 4,000 mm including tarpaulin extension with press studs and Velcro fastener - Tarp extension in driving direction: 300 mm, in height: 750 mm - Incl. eyelets for separate tarpaulin extension piece - 1 pair of vertical tarpaulin pockets approx. 1,000 mm long, positioned in the lowered bed at the front crank - With belt pockets Rear Wall: - Steel rear portal frame with side tarpaulin hook-in device - Aluminum double-wing door, 25 mm thick - Both door wings fully foldable with door holders - Each door wing with aluminum double-joint hinge and two recessed grip hollows Front Corner Posts: - Roof height, bolted to front side Central Posts: - 3 pairs of infinitely adjustable folding posts - Posts are movable along the entire length via trolley - Middle posts in the lowered bed also fixable at the rear platform Roof: - EDSCHA sliding roof (galvanized) with cross beams movable in both directions (stacked forward inside the cargo area) - Rear portal cross beam swivels away - PVC tarpaulin roof without customs closure - Manually operated hydraulic lifting roof on both sides, lift 450 mm - Movable lifting roof in positions front (9x50) and rear (9x50), can be driven at increased height - Including tarpaulin extension and apron at rear - Roof can be cranked out 900 mm at front wall Accessories: - Extendable warning signs (removable at front and rear, with socket) incl. position lights up to loading width 4,000 mm Iedpfx Aeiu Eu Noi Soig - Storage for 4 warning signs on inside of front wall, top right and left - 1 aluminum ladder with holder 2,500 mm long on front wall - 2 rows of self-securing aluminum slats - Metal mudguards with splash flaps - 1 overnight parking plate and 1 ADR plate on rear wall - BEKAMAX central lubrication system with pump and grease class 2 for approx. 35 lubrication points - Electrohydraul

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Load Area: - Extendable loading area with rear taper approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with square climbing strips 15 x 15 mm, including lower extensions - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel as well as protruding into the loading area for parking excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of lashing rings, installed flat at the front of the load area (LC 10,000 daN) - 5 pairs of folding lashing rings on the outside (LC 5,000 daN) - 2 pairs of folding lashing rings on the outside (LC 10,000 daN) - 2 pairs of lashing rings in the dipper stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the load area for securing straps (LC 2,000 daN) - Incl. three-part removable galvanized covers over the wheel recesses – max. point load 3.5 t / pc. Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surfacing - Ramp with hydraulically folding ramp sections, hydraulic lifting gear, and hydraulically adjustable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tool kit - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Mounts for warning signs left and right at the gooseneck and at the rear, each with socket - One spare wheel - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized front connector strip - 4 wheel chocks - Galvanized, extendable outriggers approx. 230 mm per side - Galvanized folding supports beneath the loading area bevel - Rear trailer bracket for rotating beacon - Cover plates for bridging the gap between ramps and load area - White reflective tape to EU regulations, sides and on extensions; rear in red - Electro-hydraulic unit installed at the rear beneath the loading area - Ramp control valves mounted on right trailer side - European reflective panels (red-yellow) on rear of trailer - Four extendable warning boards, approx. 423 x 423 mm, with position light - Bracket for rotating beacon on warning boards - Removable ALU side boards and rear board on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (structure length approx. 2,560 mm) Iodpfsup U Hzox Ai Sjig - 2 pairs of WADER container pockets in loading area for 20ft or 30ft container - 3 pairs of socket pockets for stakes 100 x 50 mm in outer frame of loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame at loading bevelling - Painted sand layer on chequer plates of the gooseneck and loading area for anti-slip protection - 80 km/h speed stickers rear and both sides - Load manometer for axle load measurement, including load chart.

Stanje: novo, največja dovoljena obremenitev: 90.700 kg, skupna masa: 126.000 kg, konfiguracija osi: > 3 osi, skupna širina: 2.850 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: Hydraulically lift/lower and detachable gooseneck. Length approx. 3,650 mm. Suitable for tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design, fixed hardwood floor approx. 50 mm thick * With drive-over bridge hooks at the front and bolt-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm, ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical bolt-lug coupling for attaching a lowbed at the front; rear end traverse * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendulum axle 3-axle front bogie: * PENDULUM AXLES, all axles hydro-mechanically forced-steered * Hose rupture valve on axle leveling cylinder with automatic RESET function * Hydraulic cylinders with shutoff taps and locking pins for securing in raised position * Final painting of axles with 2 coats of single color 2K paint, painted in MB7350 Novagrau * Rated axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tires for front bogie: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLES, all axles hydro-mechanically forced-steered * Hose rupture valve on axle leveling cylinder with automatic RESET function * Hydraulic cylinders with shutoff taps and locking pins for securing in raised position * Final painting of axles with 2 coats of single color 2K paint, painted in MB7350 Novagrau * Rated axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tires for rear bogie: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimum corrosion protection * Final painting with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, according to RAL-System 841GL Including accessories: * Steel front wall, approx. 400 mm high * Plug-in aluminum side and rear boards on gooseneck, approx. 400 mm high, anodized * 3.5" kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on gooseneck * Front bogie with separate air connection for air impact wrench Iiedpfxsw Tgp Ds Ai Sjg * BEKA-MAX central lubrication for one 3-axle bogie * Preparation for bolt-on container positioning for 1 x 20' or 1 x 30' on the outer beams * Without container locks * Brackets on the outer beams for installing foldable extensions * One 7-pin socket left and right, front and rear on rear bogie for warning panels * BEKA-MAX central lubrication for one 5-axle bogie * On the rear bogie, socket for cable remote control for steering * Rear bogie with trough * 2 LED reversing lights mounted on rear panel * European reflector boards (red-yellow) on the rear * One mudflap at rear * One LED beacon with bracket left and right on rear cross-member * Two INOX toolboxes 855 x 340 x 390 mm on gooseneck, left and right * 1-circuit...

Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Approx. 30 mm thick hardwood flooring Loading platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - 235/75 R17.5 3PMSF tyres, manufacturer of our choice - TPMS – Tire Pressure Monitoring System according to ECE R 141 - Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992 Isdpfjw Tpq Djx Ai Ssig - The tractor unit must be capable of transmitting and displaying these data for correct indication. Axles: - BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicators - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made from high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with shot-blast machine after welding - Second blasting with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection - Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavities sealed with special wax Including the following accessories: - On both the gooseneck and at the rear left and right, one holder for warning boards, including socket - Spare wheel holder in front of the bulkhead (without spare wheel) - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized connection panel at the front - Galvanized folding supports under the rear slope of the loading platform - Hardwood rear impact protection from gooseneck rear wall to loading platform - 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN) - On the gooseneck, aluminum side and rear walls

Stanje: rabljeno, največja dovoljena obremenitev: 21.130 kg, skupna masa: 34.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 11/2026, skupna širina: 2.540 mm, skupna višina: 1.980 mm, Oprema: ABS, Kässbohrer SLL 2-axle lowbed with hydraulic steering Manufacturer: Kässbohrer Model / Vehicle code: K.SLL 2 / 2H ? 18 / 20 Vehicle type: Lowbed semi-trailer Country of registration: Germany Brand: Kässbohrer Chassis color: RAL 3020 Traffic Red Dimensions & Weights * Overall length: 13,210 mm * Overall width: 2,540 mm * Fifth wheel height (H5): 1,250 mm * Platform height (unladen): 910 mm * Platform height (laden): 300 mm * Platform length: 6,810 mm * Extension: 5,550 mm * Gooseneck length: 3,600 mm * Rear swing door: 2,100 mm * Platform thickness: 200 mm * Wheelbase: 10,530 mm * Axle spacing: 1,360 mm * Unladen weight: approx. 12,873 kg (±3%) * Gross weight (40 / 60 / 80 km/h): 42,000 kg * Total axle load: 24,000 kg * Permissible king pin load: 18,000 kg (40/60/80 km/h) Chassis & Axles * 2 axles * 2 hydraulically steered axles * Axles: BPW * Suspension: Air suspension * Suspension stroke: 260 mm (190 mm / -70 mm) * Additional ride height increase of 40 mm possible * Load gauge for axle load display * Semi-automatic axle alignment with warning light sensor Brake System * WABCO EBS 2S/2M * ABS (Anti-lock Braking System) Isdpjycnbaofx Ai Sjig * RSS (Roll Stability Support) * Braking system in accordance with UN ECE R13 Electrics & Lighting * 24 V LED lighting system * 2 × 7-pin + 1 × 15-pin socket * LED brake lights * LED rear and fog lights * Electrical system according to UN ECE R48 & ADR * LED work lights at rear (2 units, reverse-controlled) * LED rotating beacon (1 unit) Tyres & Wheels * Tyre size: 245/70 R17.5 * Tyres: M+S * 3PMSF (winter suitable) * Tyre pressure monitoring system as per R141 * Number of wheels: 9 complete wheels * Rims: Steel rims (Kässbohrer selection) * Spare wheel holder: 1 unit on gooseneck Steering & Controls * Hydraulic steering on both axles * Control panel in vehicle * Radio remote control for external steering control * Multifunctional WABCO Smartboard * Axle load display * Suspension control * Tyre & brake wear monitoring * Breakdown & system monitoring Chassis & Frame * High-strength steel S700 MC (ISO 1726) * Welded bogie-bed connection * Partial metallisation (85% zinc / 15% aluminium) on outer frame & gooseneck * Adjustable and detachable gooseneck * 1 × 2 hydraulic cylinders, 220 bar operating pressure * King pin: 2 inch, bolted * King pin position: single Platform & Body * 3 removable platforms with hardwood flooring * Each platform: 100 × 1,300 × 2,115 mm * Weight per platform: 225 kg * Each platform with 2 × lashing rings (8,000 kg pull force) * Platform widening: 225 mm, galvanized * Extension clamps: 12 × 2 units, galvanized Load Securing * Lashing rings: * 1 × 2 units 13.4 t at gooseneck * 7 × 2 units 13.4 t * 4 × 2 units 8 t in lowbed * 2 × 2 units 13.4 t * 3 × 2 units 8 t on rear platform * Stake pockets: * 6 × 2 units in pool (50 × 100 mm) * 3 × 2 units at rear (50 × 100 mm) Body Components & Accessories * Aluminium front panel on gooseneck: 360 × 1,550 mm * Aluminium side panels: 360 × 1,900 mm * Aluminium rear panel: 360 × 2,480 mm * Toolboxes right & left (500 × 350 × 400 mm) * Central lubrication system * Side underrun protection according to ECE R73 * Extendable warning signs (423 × 423 mm, up to 1,000 mm) * Yellow side reflector band * Red rear reflector band For further information, please contact us.

Stanje: novo, lastna masa: 6.350 kg, največja dovoljena obremenitev: 38.650 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Loading Platform: - 2 pairs of folding external lashing rings (LC 5,000 daN) - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, air suspended, with disc brakes (430 mm), lift/lower function - Tyres: 385/65 R 22.5 Braking System: - WABCO braking system compliant with EU regulations featuring EBS-E (2S2M) Paintwork: - Premium and durable corrosion protection of the standard grit-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat in single-tone MB 7350 Novagrau - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paintwork not possible Steel Construction: - Steel construction made from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system in accordance with EU regulations - Lighting: 24 volt - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets - Connection standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection bar - 4 wheel chocks with holders - 2" king pin - Galvanized steel front wall approx. 1,600 mm high, EN12642-XL Iodoiu Etkopfx Ai Soig - White reflector tape according to EU regulations, lateral and rear red - European reflective panels (red-yellow) at the rear of the trailer - Loading platform with approx. 30 mm thick hardwood flooring, framed in omega profiles - 10 pairs of stanchion sockets for 100 x 50 mm plug-in stakes in the outer frame - 3 pairs of transverse stanchion rack strips, fitted in the loading platform, for 100 x 50 mm plug-in stakes - Bracket for 1,000 mm plug-in stakes, rear in the central beam - 1 spare wheel carrier under the loading platform on the right hand side - 1 mudflap at the rear of the trailer - Manual and description on USB stick - Bracket for beacon at the rear of the trailer - Holders for warning signs including socket at the gooseneck and left/right rear panel - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and both sides - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light - Load gauge for axle load determination including load diagram - HRM (High Resistance Metallisation) of the outer frame - Complete steel structure is grit blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot coating

Stanje: rabljeno, največja dovoljena obremenitev: 37.885 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2024, naslednji pregled (TÜV): 08/2026, Oprema: ABS, Izvleček – oprema Nosilna površina * v izvlečni izvedbi z zadnjo nagibno površino, približno 1.000 mm x 8° Obloga iz trdega lesa * približno 48 mm debeline, nad osmi rebrasta pločevina JOST opore za sedelno prikolico * (mehanske) z 2-stopenjskim menjalnikom za približno 24 t dvižne obremenitve (približno 50 t testne obremenitve) BPW osi in vzmetenje * 2 trdni osi * 1 os s krmiljenim zglobom * Tehnična osna obremenitev: 12.000 kg na os Zračno vzmetenje * z ventilom za dvig in spuščanje Zavorna naprava * v skladu z direktivami EU, z EBS-E (2S2M) Dodatna oprema * 2-palčni kraljevi zatič * Ena pocinkana jeklena čelna stena, približno 400 mm visoka * Merilnik obremenitve za ugotavljanje osne obremenitve, vključno z diagramom obremenitve * Na podaljšku (gooseneck) aluminijaste stranske stene in zadnja stena, ki se lahko pritrdijo, približno 2.440 x 400 mm (D x V) * Ena orodjarna omara, pocinkana, integrirana v nagibni podaljšek (± 47 kg) * 3 pari WADER žepov za kontejnerje na nosilni površini za 20' (30') ali 40' kontejner. (± 30 kg) * 6 parov žepov za podpore za vstavljive podpore, približno 100 x 50 mm, na zunanjem okvirju nosilne površine. (± 18 kg) * Podaljški, pocinkani, izvlečni za približno 230 mm na stran (± 230 kg) * Dvignjena os na sprednji osi * Premikalne vstavne letve za aluminijaste priklopne rampe na zadnji strani vozila * 2 LED luči za vzvratno vožnjo, nameščeni na zadnji plošči Iiodpjzv A Aqsfx Ai Seg * 2 para Ferry obročev pod podaljškom in 2 para zadaj (± 16 kg) * Štiri opozorilne table, ki se lahko izvlečejo za približno 400 mm, približno 423 x 423 mm, z LED pozicijsko lučjo. (± 25 kg) * Na opozorilnih tablah nosilec za rotacijsko luč * Rotacijska luč, priložena ločeno * HRM-metalizacija (metalizacija z visoko odpornostjo) Lakiranje * Končni sloj lakiranja, enobarvna barva RAL 3002, karminsko rdeča.

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 01/1989, Leto izdelave: 1989, Oprema: ABS, = Dodatne možnosti in dodatna oprema = - Elektronski zavorni sistem (EBS) = Opombe = Langendorf, prikolica z dvema osjema, tandem, prikolica za težke tovora Prikolica za težke tovora, dve osi ID št. 686 Z veseljem vam bomo svetovali Podpis pogodbe ali prevzem vozila lahko opravite pri nas v avtohiši. Prosimo, dogovorite se za termin. Če se ne morete pripeljati do naše avtohiše, vam ponujamo celoten postopek prek telefona/e-pošte/WhatsAppa/faksa. Po želji vam novo vozilo dostavimo neposredno na vaš naslov. To pomeni najboljšo ceno, največjo varnost in udobje pri nakupu avtomobila. Odkup Z veseljem odkupimo vaše rabljeno vozilo. Ponujamo vam možnost digitalne ocene vozila na podlagi fotografij vašega vozila, tudi brez obiska avtohiše. Naša specializirana ekipa za odkup vam ponuja zagotovljeno najvišjo ceno. Po želji vam novo »rabljeno« vozilo dostavimo neposredno na vaš naslov po vsej Nemčiji in odpeljemo vaše rabljeno vozilo. Financiranje – lizing Neposredna potrditev in prevzem obstoječega kredita *Vaš specializirani partner za osebna vozila, dostavna vozila, gospodarska vozila in gradbene stroje *ITC Gmbh & Co KG Siemensstraße 7 Iiodpfxsxt Tble Ai Seg 32312 Lübbecke (industrijska cona) Stalno več kot 400 vozil na zalogi Podatki, navedeni v oglasih, na internetu, na cenovnih tablicah in slikah, so nezavezujoči opisi in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne prevzema odgovornosti/jamstva za tiskarske in prenosne napake. Izpostavljena oprema je po potrebi treba dodatno preveriti s strani kupca. Naša ponudba je na splošno brez novega tehničnega pregleda, z veseljem vam bomo pripravili ponudbo naše partnerske delavnice. Pridržujemo si pravico do sprememb in napak. = Dodatne informacije = Lastna teža: 1.700 kg Nosilnost: 3.300 kg Največja dovoljena masa: 5.500 kg Prodajna cena: 5.999 €, 6.920 US$ Davek na dodano vrednost/davčni sistem na razliko: davek na dodano vrednost je odbitljiv.

Stanje: rabljeno, največja dovoljena obremenitev: 31.300 kg, skupna masa: 45.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2024, skupna dolžina: 13.110 mm, skupna širina: 2.550 mm, Oprema: ABS, DOLL panther T2E-S3FS21 | 2-osna nizkopodsčna prikolica | Teleskopska | hidravlično prisilno krmiljenje Naprodaj je prikolica DOLL panther T2E-S3FS21, 2-osna teleskopska nizkopodsčna prikolica s hidravlično znižljivim podaljškom in hidravličnim prisilnim krmiljenjem. Podatki o vozilu: Prva registracija: 2024 * Dovoljena skupna masa: 45.000 kg pri 80 km/h * Tehnična nosilnost: približno 31.300 kg * Lastna teža: približno 13.700 kg * Barva: RAL 9005, globoka črna * Šasija št.: W09T2E224P0D46351 Dimenzije: Skupna dolžina: 13.110 mm * Skupna dolžina vozila: 16.500 mm * Nizkopodsčna platforma: 6.700 mm * Teleskopsko podaljšanje za dodatnih 5.660 mm * Širina nizkopodsčne platforme: 2.550 mm * Višina sedla: 1.240 mm * Višina nakladanja nizkopodsčne platforme (obremenjena): približno 300 mm * Do §70: Skupna masa do 56.250 kg / Nosilnost do 42.550 kg Oprema: 2-osna podvozna konstrukcija panther * Hidravlično prisilno krmiljenje * Kot obračanja do 55° * 12-tonske osi * BPW zavora z ECO-sistemom pesta * WABCO EBS-E z ABS in RSS * Hidravlično vzmetenje * Hidravlično znižljiv podaljšek * 2-palčni kraljevi zatič, 21-tonska izvedba * Nizkopodsčna platforma s teleskopskim podaljškom * 45-mm trden leseni pod Iedpfxjzt D Sne Ai Sjig * Nakladalne rampe * Nakladna posoda za bager na zadnji strani * Orodjarna škatla iz nerjavečega jekla * Priprava za zaklepanje kontejnerjev Upravljanje / Tehnika: DOLL Tronic, krmilni sistem CAN-Bus * Zaslon DOLL control * Brezžični daljinski upravljalnik DOLL connect * Elektronsko krmiljenje za enosledno vožnjo DOLL connect EEP * Merilna naprava za obremenitev zadnje osi * Nadzor tlaka in temperature v pnevmatikah OptiTire * Dodatno krmiljenje * Osrednji sistem za mazanje BekaMax Pnevmatike / Osvetlitev: Continental 245/70 R17.5 * M+S / 3PMSF * Rezervna pnevmatika * LED osvetlitev * LED delovne luči * LED rotacijske luči * Teleskopski opozorilni znaki z LED obrobno lučjo Prikolica je dobro opremljena in je še posebej primerna za prevoz gradbenih strojev, strojev in težkih tovorov. Pridržujemo si pravico do sprememb, napak in vmesne prodaje. Za dodatne informacije smo vam z veseljem na voljo.

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, Oprema: ABS, Loading platform: - Loading platform in extendable design with pneumatically operated locking mechanism - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetically controlled reverse lock, activated via reverse gear or manually - Axle tools - Tires: 435/50 R 19.5 Brake system: Iedpsi Dwlwefx Ai Soig - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, durable corrosion protection for the standard shot-blasted welded frame by means of two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in solid Novagrau - Rear end metallized and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grained steels. - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX on the front connection console with 24N, 24S & 15-pin sockets - Connections according to ISO standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection strip - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall approx. 1,600 mm high - Yellow reflective tape as per EU regulations, on the sides, on the extension and at the rear of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Loading area with approx. 38 mm thick hardwood floor - 10 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the platform - 1 spare wheel holder beneath the loading area on the right in the direction of travel - User manual and documentation on USB stick - One mudflap at the rear of the trailer - Bracket for a revolving beacon at the rear of the trailer - On the gooseneck and on the rear panel, left and right, each a bracket for warning boards including socket - One INOX toolbox transversely mounted beneath the platform (1,000x400x2,500mm) - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container - 3 sets of crosswise post pocket bars mounted in the platform for 100 x 50 mm plug-in posts - 60 km/h speed sticker on the rear - 2 reversing spotlights mounted on the rear panel - Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light - Mounting bracket for rotating beacon on the warning sign - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, the defined visible surfaces then hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminum 15%)

Stanje: novo, največja dovoljena obremenitev: 33.865 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Izpisek opreme Gooseneck prikolica * s poševnimi robovi spredaj, približno 45° in s poševnim zadnjim delom, približno 750 mm x 10° * 3 pari pritrdilnih obročev (LC 5.000 daN) * trda lesena obloga, debeline približno 30 mm Tovorilna ploščad * v dvojni izvlečni izvedbi s poševnim zadnjim delom, približno 500 mm x 8° * 6 parov pritrdilnih obročev, ki se zlagajo navzven (LC 5.000 daN) * 4 pari pritrdilnih obročev, ki se zlagajo navzven (LC 10.000 daN) * 1 par pritrdilnih obročev, nameščen vodoravno na sprednji strani tovorilne ploščadi (LC 10.000 daN) * 1 vmesna miza, približno 250 mm * trda lesena obloga, debeline približno 48 mm, nad osmijo obloga iz valjane pločevine * izrezi v zunanjem okvirju tovorilne ploščadi za obešanje napenjalnih trakov (LC 2.000 daN) Osi * BPW osi in vzmetenje, vse osi hidro-mehansko sinhronizirane * maksimalna tehnična obremenitev osi: 12.000 kg na os * zračno vzmetenje z ventilom za dvig in spuščanje Iodpozlwm Nefx Ai Seig * orodje za osi Pnevmatike * 245/70 R 17.5, indeks nosilnosti (146/146 F) * proizvajalec po naši izbiri Podporne noge * JOST podpore (mehanske) z dvostopenjskim menjalnikom za približno 24 t dvigalne nosilnosti (približno 50 t preizkusne nosilnosti) Zavorna sistem * v skladu z direktivami EU, z EBS-E (2S2M) brez priključnih kablov do vlečne enote Barvanje * vrhunsko in dolgotrajno protikorozijsko zaščito standardno kroglično peskane jeklene konstrukcije zagotavlja dvokomponentna (2K) temeljno prevleka s cinkovim prahom * vrhunska dvokomponentna (2K) * zaključna barva, enobarvna, v RAL 3002, karminsko rdeča * zadnji del je metaliziran in pobarvan v RAL 9010 (čista bela) * metalizirano barvanje ni mogoče Jeklena konstrukcija * iz visoko trdnih finozrnatih jekel * kvalitete jekla: S355J2+N/S355MC (meja tečenja 355 MPa) S690QL/S700MC (meja tečenja 690 MPa) Električni sistem * v skladu z direktivami EU * razsvetljava 24 voltov ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX na sprednji priključni letev z vtičnicami 24N, 24S in 15-polno * priključki v skladu s standardom ISO. 24N ISO-1185, 24S ISO-3731, 15-polni ISO-12098 Vključno z naslednjo dodatno opremo * 2 palčni kraljevi člen (King pin) * pocinkana jeklena sprednja stena, približno 400 mm visoka * rumeno-rdeči zračni spojniki na pocinkani sprednji priključni letvi * 4 kosi zavorne podloge z nosilcem na sprednji steni (± 5 kg) * nosilec za rezervno kolo pred sprednjo steno * elektro-hidravlična enota (± 45 kg) * naknadno usmerjanje od spredaj in zadaj s pomočjo kabelskega daljinskega upravljanja, upravljanje z gumbi, z nadzorom osi (brez vgradnje v vlečno enoto) * nosilec na zadnjem delu gooseneck prikolice za aluminijaste nakladalne rampe * evropski reflektorski znaki (rdeče-rumeni) na zadnji strani prikolice * rumeno reflektorsko trakom v skladu z direktivami EU, stransko, na izvlečni strani in na zadnji strani prikolice * na gooseneck prikolici in na zadnji plošči, na levi in desni strani, nosilec za opozorilne table, vključno z vtičnico * priključna letev za aluminijaste nakladalne rampe na zadnji strani vozila * nosilec za okroglo rotacijsko luč na zadnji strani prikolice * pocinkane zložljive podpore pod poševnim delom tovorilne ploščadi * zaščitnik blatnikov na zadnji strani prikolice * navodila in opis na USB-ključu * nalepka za omejitev hitrosti 80 km/h na zadnji in na obeh stranskih straneh * manometer za obremenitev osi za ugotavljanje obremenitve osi, vključno s diagramom obremenitve.

Stanje: novo, lastna masa: 13.850 kg, največja dovoljena obremenitev: 31.150 kg, skupna masa: 45.000 kg, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dolžina tovornega prostora: 6.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 300 mm, velikost pnevmatike: 245/70 R 17,5, barva: črn, Oprema: ABS, Gooseneck: - Hydraulically detachable gooseneck with external main frame featuring integrated steering pick-up and individually operated push-off cylinders - Integrated hydraulic cylinders and support arms for coupling and uncoupling the lowbed deck - Piping connections to the lowbed, mounted on the inside of the main frame at the gooseneck kink - Bracket for locking pins Lowbed, extendable: - Frame pre-tensioning adapted for the maximum payload, reduced payload in the telescoped positions - Prepared for the installation of load area wideners - Telescoping stages approx. every 500 mm + container positions - 7 pairs of swivelling lashing rings, 13,400 daN lashing capacity - 5 pairs of stake pockets 100x50 mm in the outer frame - 3 pairs of M36 threaded bushings on the outside of the telescopic frame for screwing in lashing brackets - 1 pair of M36 threaded bushings on the inside of the telescopic frame for screwing in lashing brackets - Prepared for the installation of container locks - Adapter without pin-tab coupling: 2 pairs of 13,400 daN lashing rings welded on the adapter facing the lowbed; 1 pair on the outer adapter; 1 pair on the inner adapter - 45 mm spruce plank flooring between the flatbed frame sections Chassis, drive-over type: - Steel welded construction in compact design with open excavator trough at the rear - Kink to lowbed at 90°, with 2 pairs of holes at the front and rear of the chassis platform for hanging loading ramps using locking pins - Different track widths can be set using 2 different holes - Welded smooth steel floor above the axles with anti-slip coating, max. 5,000 kg axle load - End beam with cutouts for lights, designed as underrun protection according to ECE R58-003 - Valves and electrical distribution protected, installed in the double floor Axles, suspension, and tires: - DOLL tera pendle axle technology with hydraulically suspended GIGANT pendle axles - All axles rated at 12 t, with ABS and AGS (automatic slack adjuster) - All axles hydraulically steered, with max. 60° steering angle on the rearmost axle - Use of low-maintenance bearing points in the steering area - All lubrication points connected to the central lubrication system - Lift axle / jack function, a locking pin is supplied for each axle to allow axle lifting - DOLL tera pendle axle with hydraulic suspension and damping elements - Lifting and lowering device with 600 mm total stroke (-70/+530) - Hydraulic dual-circuit displacement steering system - Steering pick-up at the king pin plate, mounted on a turntable - Transmission of steering angles via a tie rod to the front master cylinders - Rear slave cylinders transfer the front steering angles via solid steering rods to the steering axles - All valves are centrally mounted on a control block - Axle load indicator via manometer on the side Iiodjy Dqkhepfx Ai Seg - Steering pressure monitoring - Tire pressure monitoring system - Tires: 245/70 R 17.5 Accessories included: - Steel front wall with spare wheel holder, bolted, 520 mm high, hot-dip galvanized - Side and rear panels, insertable, approx. 400 mm high, anodized - Two central lubrication systems BEKAMAX - DOLL Tronic - CAN-Bus system - Support arms for coupling and uncoupling the lowbed deck - Fifth wheel plate with integrated steering pick-up, steering wedge, and 2'' king pin to accommodate the trailer - Gooseneck cylinders for coupling and uncoupling the lowbed deck - 6-way hydraulic coupling with pressure relief valve for easy disconnection of hydraul

Stanje: rabljeno, največja dovoljena obremenitev: 21.130 kg, skupna masa: 34.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 11/2026, skupna širina: 2.540 mm, skupna višina: 1.980 mm, Oprema: ABS, Kässbohrer SLL 2-axle lowbed with hydraulic steering Highlight: Optionally available for rent as a complete unit together with the pictured truck. Manufacturer: Kässbohrer Type / Vehicle code: K.SLL 2 / 2H ? 18 / 20 Vehicle type: Lowbed semi-trailer Country of registration: Germany Brand: Kässbohrer Chassis color: RAL 3020 traffic red Dimensions & Weights - Overall length: 13,210 mm - Overall width: 2,540 mm - Fifth wheel height (H5): 1,250 mm - Platform height (unladen): 910 mm - Platform height (laden): 300 mm - Platform length: 6,810 mm - Extension: 5,550 mm - Gooseneck length: 3,600 mm - Rear swing door: 2,100 mm - Platform thickness: 200 mm - Wheelbase: 10,530 mm - Axle spacing: 1,360 mm - Unladen weight: approx. 12,873 kg (±3%) - Gross weight (40 / 60 / 80 km/h): 42,000 kg - Total axle load: 24,000 kg - Permissible kingpin load: 18,000 kg (40 / 60 / 80 km/h) ---Running Gear & Axles - 2 axles - 2 hydraulically steered axles - Axles: BPW - Suspension: Air suspension - Suspension stroke: 260 mm (190 mm / -70 mm) - Additional raising of driving level by 40 mm possible - Load gauge for axle load display - Semi-automatic axle centering with warning light sensor ---Brake System - WABCO EBS 2S/2M - ABS (Anti-lock Braking System) - RSS (Roll Stability Support) - Brake system in accordance with UN ECE R13 ---Electrics & Lighting - 24 V LED lighting system - 2 × 7-pin + 1 × 15-pin socket - LED brake lights - LED rear and fog tail lights - Electrical system in accordance with UN ECE R48 & ADR - Rear LED work lights (2 pieces, reverse gear dependent) - Rotating LED beacon (1 piece) ---Tyres & Rims - Tyre size: 245/70 R17.5 - Tyres: M+S - 3PMSF (winter suitable) - Tyre pressure monitoring system according to R141 - Number of wheels: 9 complete wheels - Rims: Steel rims (Kässbohrer choice) - Spare wheel holder: 1 piece on gooseneck ---Steering & Controls - Hydraulic steering on both axles - Control panel in vehicle - Remote control for external steering control - Multifunctional WABCO Smartboard - Axle load indicator - Suspension control - Tyre & brake wear monitoring - Breakdown & system monitoring ---Chassis & Frame - High-strength steel S700 MC (ISO 1726) - Welded bogie bed connection - Partial metallization (85% zinc / 15% aluminum) on outer frame & gooseneck - Adjustable and detachable gooseneck - 1 × 2 hydraulic cylinders, 220 bar operating pressure Iijdpsynprwofx Ai Seg - Kingpin: 2 inch, bolted - Kingpin position: single ---Platform & Superstructure - 3 removable platforms with hardwood flooring - Each platform: 100 × 1,300 × 2,115 mm - Weight per platform: 225 kg - 2 × lashing rings per platform, each with 8,000 kg lashing capacity - Platform widening: 225 mm, galvanized - Extension clamps: 12 × 2 pieces, galvanized ---Load Securing Lashing rings: - 1 × 2 pieces 13.4 t on gooseneck - 7 × 2 pieces 13.4 t - 4 × 2 pieces 8 t in lowbed - 2 × 2 pieces 13.4 t - 3 × 2 pieces 8 t on rear platform Stake pockets: - 6 × 2 pieces in pool (50 × 100 mm) - 3 × 2 pieces at rear (50 × 100 mm) ---Accessories & Equipment - Aluminium front panel gooseneck: 360 × 1,550 mm - Aluminium side panels: 360 × 1,900 mm - Aluminium rear panel: 360 × 2,480 mm - Toolboxes right & left (500 × 350 × 400 mm) - Central lubrication system - Side underrun protection as per ECE R73 - Warning...

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 35.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 940 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading area: - Loading deck in extendable design - Loading deck with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cut-outs in the loading deck's external frame for attaching tension belts Braking system: - Braking system in accordance with EU regulations, with EBS-E (2S2M) Painting: - First-class, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer - High-quality two-component (2K) top coat in solid Novagrey - Rear section metallised and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST mechanical landing gear with 2-speed gearbox, 24t lifting capacity (test load 50t) Steel construction: - Steel structure made from high-strength fine grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, LED lighting 24 Volt - Sockets: 2x 7-pin & 15-pin Axles and tyres: - BPW axles, air suspended, with disc brakes (377 mm), with lifting/lowering function - Hydro-mechanically forced steering - Axle tools - Twin tyres 235/75 R 17.5 Accessories included: - Yellow-red air couplings at the galvanised front connection bar - 4 wheel chocks with holder - 2" king pin - Galvanised steel headboard approx. 1600 mm high - White reflective tape on the sides, sliding section and rear in red in accordance with EU regulations - Loading deck with heavy-duty hardwood floor - Rear and front steering by cable - Remote control via push buttons, with single-track monitoring of the axles - With wireless remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading deck - Galvanised folding supports under the loading deck bevel - Sliding mounting rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the trailer rear - One mud flap at the trailer rear - Mount for a beacon at the trailer rear - Mounts for warning boards including socket on gooseneck and rear panel, each left and right - Stainless steel toolbox INOX 1,500 x 390 x 810 under the loading deck, right side in driving direction Iedpfxol Ux Rwe Ai Seig - Central lubrication system BEKAMAX (Pico) with NLHI-2 multipurpose grease and removable protection around pump - 6 pairs of WADER container locks on the loading deck for 1x 20ft, 2x 20ft or 1x 40ft containers, additional locking for one 45ft container in extendable section - 4 pairs of crosswise stake pocket strips mounted in the loading area for 100 x 50 mm plug-in stakes - Lift axle on the first axle, controlled by TEBS, dependent on current axle load and load condition - 80 km/h speed stickers at the rear and on both sides - Four extendable warning boards ca. 400 mm (approx. 423 x 423 mm) with LED position light - Beacon mount on the warning boards - Load gauge for axle load determination, including load diagram - HRM metallisation (High Resistance Metallisation) on the external frame - Complete steel construction shot-blasted, then all defined visible areas metallised with ZINACOR 850 (85% zinc, 15% aluminium) by thermal spraying

Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 38.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.200 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, barva: sivo-črna, Oprema: ABS, Cargo Area: • Extendable cargo area with pneumatically operated locking mechanism • Cargo platform with approx. 30 mm thick timber flooring • 7 pairs of external folding lashing rings (LC 5,000 daN) • 3 pairs of external folding lashing rings (LC 10,000 daN) • Cutouts in the outer frame of the cargo area for attaching tensioning straps (LC 2,000 daN) Axles and Tyres: • BPW axles and suspension, all axles hydromechanically forced-steered • Equipped with disc brakes • Technical axle load: 10,000 kg • Air suspension with lift and lower valve • Axle tool kit • Tyres: 385/65 R 22.5 • TPMS tire pressure monitoring system compliant with ECE R 141 Brake System: • WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Electrical System: • Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX at the front control strip with 24N, 24S & 15-pin sockets • Connections as per ISO standards • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Standard Accessories Included: • Remote-controlled steering from front and rear via cable remote control with push buttons, including single-track axle monitoring • 4 wheel chocks with holders mounted on the front wall • 2" king pin • One galvanized steel front wall, approx. 1,600 mm high • Yellow-red air couplings at the galvanized front connection strip • White reflective tape compliant with EU standards on both sides, on extension, and at the rear of the trailer in red • European reflective plates (red-yellow) at the rear of the trailer • One mud flap at the rear of the trailer • Operating manual and instructions • Mount for a revolving beacon at the rear of the trailer • Cargo area with approx. 30 mm thick timber floor inset in omega profiles • 10 pairs of stake pockets (100 x 50 mm) in the outer frame of the cargo bed • 1 spare wheel holder under the cargo area, right-hand side in the direction of travel • Electro-hydraulic unit • At the gooseneck and rear panel left/right, each with bracket for warning signs, incl. socket • Coated sand layer on the main beam as anti-slip protection • 6 pairs of WADER container pockets in the cargo area for 1x20ft, 2x20ft or 1x40ft containers; additional locking point provided in the extension for a 45ft container • 4 pairs of transverse stake pocket rails in the cargo area for plug-in stakes 100 x 50 mm • Access ladder mounted on the right side in the direction of travel • One HDPE toolbox approx. 1,200 x 500 x 480 mm at the front under the cargo bed, left in the direction of travel • BEKAMAX (Pico) centralized lubrication system with removable pump guard • Lift axle on front axle, controlled via TEBS E according to dynamic axle load and load status • Wireless remote control for steering, in addition to cable operation, with indicator lights on receiver for single-track monitoring • Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, equipped with position light Iedpfx Aieiu Etre Ssig • Bracket for revolving beacon on the warning signs • 80 km/h speed sticker on rear and both sides • Load gauge for axle load determination, including load chart • HRM (High Resistance Metallisation) of the outer frame • Complete steel construction shot blasted; subsequently, defined visible surfaces metallised by hot-dip application with ZINACOR 850 (85% zinc – 15% aluminium)

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm Ijdpfx Aieiu Er Ae Sjig - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: novo, največja dovoljena obremenitev: 48.930 kg, skupna masa: 63.000 kg, konfiguracija osi: > 3 osi, Oprema: ABS, Celotno zalogo vozil, vključno z vozili, ki so na voljo takoj in v kratkem roku, najdete na naši spletni strani. Izvleček iz opreme. Popolna oprema na zahtevo. "Gooseneck" prikolica * s poševnimi robovi spredaj, približno 45° in z zadnjim poševnim robom, približno 750 mm x 10° * 3 pari pritrdilnih obročev (nosilnost 5.000 daN) * trdna lesena obloga, debeline približno 30 mm Tovorilna površina * dvodelna, izpodvlačna izvedba z zadnjim poševnim robom, približno 500 mm x 8° * 5 parov pritrdilnih obročev, ki se zunanji prepognejo (nosilnost 5.000 daN) * 4 pari pritrdilnih obročev, ki se zunanji prepognejo (nosilnost 10.000 daN) * 1 par pritrdilnih obročev, nameščenih ležeče na sprednji strani tovorilne površine (nosilnost 10.000 daN) * 1 vmesna miza, približno 250 mm * izrezi v zunanjem okvirju tovorilne površine za pritrditev zategovalnih trakov (nosilnost 2.000 daN) * trdna lesena obloga, debeline približno 48 mm, nad osmi je valjasta kovinska obloga Osi Iiedpfezlwm Ajx Ai Ssg * osi BPW, hidravlično-mehansko sinhronizirano krmiljenje * tehnična nosilnost osi: 12.000 kg na os * zračna vzmetenje z ventili za dvig in spuščanje Pnevmatike * 245/70 R 17.5 3PMSF, indeks obremenitve (146/146 F) * TPMS sistem za nadzor tlaka v pnevmatikah, v skladu s standardom ECE R 141 Opore sedla * JOST opore sedla (mehanske) z dvostopenjsko prestavo za približno 24 t nosilnosti (približno 50 t testna nosilnost) Zavorna naprava * v skladu z direktivami EU z EBS-E (4S3M) Jeklena konstrukcija * iz visoko trdnih finozrnatih jekel * vrste jekel: S355J2+N/S355MC (meja tečenja 355 MPa) * S690QL/S700MC (meja tečenja 690 MPa) Električni sistem * v skladu z direktivami EU, osvetlitev 24 voltov ASPÖCK-NORDIK (ASS3) * vse LED stranske markerne luči utripajo sinhronizirano s smerniki * ASPÖCK-UNIBOX na priključni letev spredaj s vtičnicami 24N, 24S & 15-polni priključek, v skladu s standardom ISO. 24N ISO-1185 24S ISO-3731 15-polni ISO-12098 Barvanje * celotna jeklena konstrukcija, po varjenju, avtomatsko peskana z metodo vrtinčenja * drugo peskanje s korundom za optimalno oprijemljivost prevlečnega sistema * HRM-metalizacija celotnega podvozja vozila z ZINACOR 850 (85% cink/15% aluminij) za zagotovitev najboljše zaščite proti koroziji * končna barva z 2 plastma 2K-lak, enobarvno, v RAL 3002 Karminrot, v skladu s sistemom RAL 841GL * platišča v srebrni barvi. Zadnji del je metaliziran in pobarvan v RAL 9010 (čista bela) * metalizirano barvanje ni mogoče * test barvne strukture izveden v testu meglenega spreja s soljo, v skladu s standardom ISO 9227-NSS * zaščita notranjih prostorov s posebnim voskom Vključno z naslednjo dodatno opremo 2-palčni kraljevi vtič * elektro-hidravlična agregat (± 45 kg) * dodatno krmiljenje od spredaj in od zadaj s kablom, upravljanje s pritiskovnimi gumbi, z nadzorom posameznih osi (brez vgradnje v centralno krmilno enoto) * na "gooseneck" prikolici in na zadnji plošči, na levi in desni strani, držalo za opozorilne table, vključno z vtičnico * držalo za okroglo luč na zadnji strani prikolice * na "gooseneck" prikolici aluminijaste stranske stene in zadnja stena, ki se lahko vstavi, približno 2.440 x 400 mm (D x V) * zadnje pocinkane stranske stene se lahko odstranijo. (dolžina nadgradnje, približno 2.560 mm) (± 46 kg) * orodjarna omara, pocinkana, integrirana v poševno "gooseneck" prikolico (± 47 kg) * 4 pari WADER žepov za zabojnike na tovorilni površini za 20', 2x 20', 40' ali 45' zabojnik (± 40 kg) * 7 parov žepov za stranske stene, približno 100 x 50 mm

Stanje: novo, lastna masa: 14.800 kg, največja dovoljena obremenitev: 61.700 kg, skupna masa: 76.500 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck with rear chamfer of approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading Platform: • Extendable loading platform with rear chamfer of approx. 500 mm x 8° Iiedpfema Hf Rsx Ai Ssg • 9 pairs of folding external lashing rings • 1 pair of recessed lashing rings at the front of the loading platform • Cutouts in the outer frame of the loading platform for attaching tension belts • Approx. 48 mm thick hardwood flooring, checker plate above the axles Landing Legs: • JOST mechanically operated landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: • BPW axles and suspension, 1st axle steering, 2nd and 3rd axle fixed, 4th and 5th axle follow-steering • Technical axle load: 12,000 kg • 1st, 4th, and 5th axles with electromagnetic reverse lock, activated via reverse gear or manually • Tyres: 235/75 R 17.5 3PMSF Brake System: • WABCO brake system in accordance with EU regulations including EBS-E (4S3M) Paintwork: • Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer • High-quality single-color two-component (2K) topcoat in MB 7350 Novagrau • Rear section metallized and painted in RAL 9010 (Pure White) Steel Construction: • Steel structure made from high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Accessories: • One spare wheel with holder in front of the front wall • 2" king pin • Galvanized steel front wall, approx. 400 mm high • Front galvanized connection strip with yellow-red air couplings • 2 wheel chocks with holders mounted on the front wall • Rear mount on gooseneck for ALU drive-on ramps • Galvanized extendable wideners appx. 230 mm per side • Bracket for a beacon at the rear of the trailer • Galvanized supports under the chamfer of the loading platform • White reflector tape on the sides as per EU regulations, red at the extension and rear • Mounts for warning panels including socket left and right at the gooseneck and rear panel • Detachable ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • Rear galvanized plug-in stanchions removable (body length approx. 2,560 mm) • 3 pairs of WADER container pockets in the loading platform for a 20ft (30ft) or a 40ft container • 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform • Lifting axle on the front axle with TEBS E control according to the current axle load and loading condition • Movable mounting rails for ALU drive-on ramps at the rear of the vehicle • 20 x 20 mm square climbing strips at 200 mm intervals on the outer frame chamfer of the loading platform • BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump cover • Four extendable warning panels approx. 423 x 423 mm with a position light, extendable by approx. 400 mm • Holder for beacon mounted on the warning panels • European reflector plates (red-yellow) on the rear of the trailer • 80 km/h speed limit stickers at rear and both sides • Axle load gauge with load diagram included • HRM Metallisation (High Resistance Metallisation) of the outer frame • Complete steel structure is shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminum 15%) using hot finishing

Stanje: novo, največja dovoljena obremenitev: 27.520 kg, skupna masa: 33.000 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Zavore: * Wabco EBS-E / ABS (elektronski zavorni sistem z RSS) * Naprava za izpust v sili za vzmetne valje * Bobnaste zavore 420 x 180 mm * Končna zavora s skrajšanimi zadnjimi blatniki ter ročnim stikalom za zaključni stroj ----Os: * 2 x 9 t BPW ali SAF osi (odvisno od razpoložljivosti) * Dvižna os z zagonsko pomočjo ----Vzmetenje: * Zračno vzmetenje z avtomatskim znižanjem med kipanjem (za povečanje stabilnosti, izklopljivo za stroj za asfaltiranje) ----Elektrika / razsvetljava: * Sistem za nadzor tlaka v pnevmatikah (TPMS) * 1 x 15-polna vtičnica za priklop prikolice * Eco-LED II razsvetljava s zaščitno streho * 1 x dodatni LED delovni žaromet * utripajoče stranske označevalne luči ----Splošni sestavni deli: * Aluminijasti zračni rezervoar * Teleskopske jeklene podporne noge s krožnimi ploščami (možno snemanje le v praznem stanju) * 4 m aluminijaste stranske lestve, nameščene desno nad blatniki * zaprti posamezni blatniki iz plastike * zložljiva zaščita podvozja * vlečna kljuka zadaj * zložljiva dostopna lestev spredaj levo ob strani ----Okvir: * Šasija iz visoko trdnega finozrnatega jekla s prečnimi nosilci, specifičnimi za Meiller ----Nagibna korita: * Polokrogla jeklena zadnja nagibna korita iz jekla STEELECT 450 - HBW 450 * Prednja stena z 600 mm strešno nadgradnjo kot nosilec cerade * Stranske stene z močnim, obdanim, navznoter nagnjenim zgornjim robom * Prednja in zadnja stena - poševno postavljeni * Dokumentna škatla na prednji steni * Zadnji pokrov z gumijastim tesnilom in dvema dodatnima ročnima zapahoma ter avtomatskim 2-kavljastim zaklepom Iijdpfx Aew Eg Ekei Sjg ----Debelina tal, stranskih sten, prednje in zadnje stene: * Talna plošča 5/6 mm * Prednja stena 4 mm * Stranske stene 4 mm * Zadnja stena 4 mm ----Hidravlični bat: * Sprednji hidravlični bat s srednjim delovnim tlakom ----Cerada: * električni pomični ponjavni sistem - RAL 9006 bela aluminij - z ročnim stikalom na šasiji in daljinskim upravljalnikom ----Prostornina natovarjanja: * približno 25 m³ ----Višina priklopa: * prazno približno 1.250 mm * natovorjeno približno 1.220 mm ----Barvanje: * barvanje šasije v RAL 7021 črna siva * nagibna korita v RAL 9006 bela aluminij ----Splošne informacije: * Napake in vmesna prodaja so pridržane * novo vozilo z garancijo proizvajalca ----Dobavni rok: * dobavljivo od 37. tedna/2026

Stanje: novo, največja dovoljena obremenitev: 46.800 kg, skupna masa: 58.000 kg, konfiguracija osi: > 3 osi, Oprema: ABS, Na naši spletni strani najdete naš celoten nabor vozil, ki so na voljo takoj ali v kratkem roku. Izbor iz opreme: Celotna oprema na zahtevo. "Labodje vrat": * "Labodje vrat" s poševnimi robovi spredaj, približno 45° in z zadnjo poševnostjo približno 750 mm x 10° Ijdszk S Dmepfx Ai Ssig * 3 pari pritrdilnih obročev (nosilnost 5.000 daN) * Prevleka iz trdega lesa, debeline približno 30 mm Nosilna plošča, raztegljiva različica: * z zadnjo poševnostjo približno 1.000 mm x 8° * 5 parov pritrdilnih obročev, z zunanjim mehanizmom za zlaganje (nosilnost 5.000 daN) * 3 pari pritrdilnih obročev, z zunanjim mehanizmom za zlaganje (nosilnost 10.000 daN) * 1 par pritrdilnih obročev, nameščen vodoravno spredaj na nosilni plošči (nosilnost 10.000 daN) * Vrezanine v zunanjem okvirju nosilne plošči za pritrditev zategovalnih trakov (nosilnost 2.000 daN) * Prevleka iz trdega lesa, debeline približno 48 mm, nad osmi protizdrsna prevleka. Osi: * Osi in vzmetenje BPW * Prva os je fiksna, vse ostale osi pa so hidravlično-mehansko sinhronizirane * Tehnična obremenitev osi: 12.000 kg na os * Zračno vzmetenje z ventilom za dvigovanje in spuščanje * Orodje za osi * Pnevmatike * 245/70 R 17.5 3PMSF * Indeks obremenitve (146/146 F) * TPMS: Sistem za nadzor tlaka v pnevmatikah, v skladu s standardom ECE R 141 Podporne noge * Podporne noge JOST (mehanske) z 2-stopenjsko prestavo za približno 24 t dvigalne nosilnosti (približno 50 t preizkusne nosilnosti) Zavorna naprava * v skladu s predpisi EU z EBS-E (4S3M) Barvanje * Celotna jeklena konstrukcija, avtomatsko obdelana s peščanjem po varjenju * Drugo peskanje s korundom za optimalno oprijemljivost prevlečnega sistema * HRM-metalizacija celotnega šasije vozila s pomočjo ZINACOR 850 (85 % cink/15 % aluminij) za zagotavljanje najboljše korozijske zaščite * Končno barvanje z 2 plastmi 2K lakom * enobarvno, v barvi RAL 3002 Karminrot, v skladu s sistemom RAL 841GL * Platišča v srebrnosivi barvi. Zadnji del metaliziran in pobarvan v barvi RAL 9010 (čista bela) * Metalizirano barvanje ni mogoče * Barvna prevleka preizkušena s testom solne megale v skladu s standardom ISO 9227-NSS * Zapiranje votlin s specialnim voskom Jeklena konstrukcija * iz visoko trdnih finozrnatih jekel * Kakovost jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa) Električni sistem * v skladu s predpisi EU Osvetlitev * 24 Volt ASPÖCK-NORDIK (ASS3) * Vse LED stranske gabaritne luči utripajo skupaj s smerokazom * ASPÖCK-UNIBOX na priključni letev spredaj s vtičnicami 24N, 24S & 15 polna * Priključek v skladu z ISO. 24N ISO-1185 24S ISO-3731 15 polna ISO-12098 Vključno z naslednjo dodatno opremo: * 2-palčni kraljevi priklop * Pocinkana jeklena sprednja stena, približno 400 mm visoka * Elektro-hidravlična agregat (± 45 kg) * Pomik sprednje in zadnje osi s kabelskim daljinskim upravljanjem preko tipk, z nadzorom ene osi (brez vgradnje v centralno mazalno enoto) * 1 par potopljenih pritrdilnih obročev vzdolž centralnega nosilca zadaj v poševnem delu (nosilnost 10.000 daN) (± 3 kg) * Na "labodjem vratu" aluminijaste bočne stene in zadnja stena, vstavljivi, približno 2.440 x 400 mm (D x V) * Zadnje pocinkane vstavne ograje je mogoče odstraniti. (dolžina nadgradnje približno 2.560 mm) (± 46 kg) * Orodje, galvanizirano, integrirano v poševni del "labodjega vrata" (± 47 kg) * 3 pari WADER žeepov za kontejnerje na nosilni plošči za 20' (30?) ali 40'? kontejner (± 30 kg) * 6 parov žeepov za vstavne ograje, približno 100 x 50 mm, v zunanjem okvi

Stanje: rabljeno, največja dovoljena obremenitev: 25.600 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2027, Oprema: ABS, Izdelki iz serijske opreme. Celotna oprema na zahtevo. Priznati del Isdezlmkwjpfx Ai Sjig Priznati del Light, dolžina cca 4.080 mm Priznati del, hidravlično dvigljiv/spustljiv in odklonljiv Za SZM: 4 x 2 in 6 x 2 Nizka platforma Nizka platforma, zasnovana kot teleskopski most za bager z iztegom spredaj in mehanskim zaklepom. Dolžina x širina cca 6.350 mm x 1.300 mm Podvozek zadaj Podvozek zadaj v kratki izvedbi z zaprtim zunanjim okvirjem in jekleno ploščo z bagerjem, ki je v zadnji polovici zaprta za namestitev rezervoarjev za zrak Osi in vzmetenje BPW osi in vzmetenje, vse osi hidravlično-mehansko prisilno usmerjene Tehnologija osne obremenitve: 12.000 kg Zračno vzmetenje z ventilom za dvig in spuščanje Orodje za os Pnevmatike 235/75 R 17.5 3PMSF, dvojne pnevmatike Indeks obremenitve 143/141J (144/144F) Zavorna naprava Zavorna naprava znamke WABCO EBS-E v skladu z direktivami EU Brez povezovalnega kabla za vlečno enoto Barvanje 6-K končna obdelava Celotna jeklena konstrukcija, peskana po varjenju 1 sloj temeljne barve na cinkovi bazi, 1 sloj prajmerja za oprijem Končni premaz z 2 plastmi dvokomponentne barve (akril), enobarvna v RAL 3002 karminsko rdeči barvi, nato pa zapiranje votlin s posebnim voskom. Platišča v srebrni barvi Dodatna oprema Jeklena sprednja stena, vstavljiva, cca 400 mm visoka Priključna letev za napajalne kable do SZM, nameščena na višini zunanjega profila okvirja Okrogla NATO vtičnica na priključni letev spredaj (Maeler & Kaege VG 96 917) 3 kW elektrohidravlična enota za upravljanje hidravličnih funkcij, razen hidravličnih vitlov 3 pari vtičnih pritrdilnih obročev na priznatem delu (LC 5.000 daN) 2 para varjenih pritrdilnih obročev LBS 3 (LC 6.000 daN), spredaj cca 600 mm za sprednjo steno in zadaj na priznatem delu 2 para varjenih pritrdilnih obročev LBS 3 (LC 6.000 daN), na zunanjem okvirju priznačnega dela Na priznačnem delu 2 para vtičnih aluminijastih stranskih desk, cca 400 mm visoke, eloksirana izvedba Na priznačnem delu ena vtična aluminijasta zadnja stena, cca 400 mm visoka, eloksirana izvedba Nad priznačnim delom cca 12 mm debel premaz Delignit 2 palčni kraljevi zatič Hidravlična prečka za oporo priznačnega dela na SZM ali priklopniku Zračna priključnica z zračno pištolo na priznačnem delu Možnost dostopa na priznačni del 2 para vtičnih žepov za nosilce na priznačnem delu, za vtične nosilce cca 100 x 100 mm Na notranji cevi zunaj, navojne luknje za pritrditev vijačnih pritrdilnih obročev M24 (LC 8.000 daN) 2 para vijačnih pritrdilnih obročev M24 (LC 8.000 daN), vključno Na zgornjem pasu zunaj cca vsakih 1.200 mm možnost obešanja ø26 mm za vijačne obroče (LC 8.000 daN) 10 parov pritrdilnih obročev na zunanjem nosilcu RBS-5 (LC 10.000 daN), pod in med podaljški Zložljivi, iztegljivi podaljški, blokirni na cca 2.550/2.750/3.000 mm, vklj. jeklene podloge v deljeni izvedbi, z leseno oblogo Poševnost spredaj na podvošku, cca 350 mm x 12°, vključno z integriranimi nosilnimi letevami spredaj in zadaj za dodatne rampe 2 para pritrdilnih obročev z zadrževalno vzmetjo na prehodu od nizke platforme do bagerja (LC 10.000 daN) 3 pari vtičnih pritrdilnih obročev v zunanjem okvirju podvoška, zložljivi navzven: spredaj in zadaj po 1 par (LC 5.000 daN), v sredini 1 par (LC 10.000 daN) 2 para pritrdilnih obročev LBS-3 (LC 6.000 daN) varjeni nad

Stanje: rabljeno, skupna masa: 133.000 kg, konfiguracija osi: > 3 osi, prva registracija: 11/2023, Oprema: ABS, Trailer - Vehicle Identification Number: XNJ55H5XX23H01262 - First registration: 29.11.2023 Iisdpfxex Ialvj Ai Seg DOLLY - Vehicle Identification Number: XNJ33H5XD23H01262 - First registration: 29.11.2023 POWER HYDRAULICS with NATO socket – or machine hydraulics German registration Unladen weight: Trailer: 27,140 kg | DOLLY: 13,200 kg Fifth wheel height: 1,350 mm – Replaceable kingpin – 3.5" Front swing clearance approx. 1,732 mm ---- Hydraulic, detachable and height-adjustable swan neck – Length 4,020 mm Lowbed: Length: 8,000 mm Width: 2,870 mm – Loading height: approx. 560 mm TELESCOPIC extension by 5,800 mm EXPANDABLE up to 3,240 mm Chassis frame: Length: 7,410 mm Width: 2,750 mm – Loading height: approx. 1,100 mm Total length with dolly: 24,622 mm / without dolly: 20,140 mm Excavator trough - dipper stick recess Central lubrication system BROSHUIS axles – PENDLE AXLES with drum brakes with radio remote control 5 x hydraulically suspended and forced-steered axles Axle loads: 5 x 12,000 kg Maximum fifth wheel load: 25,000 kg Tyres: 285/70 R 19.5 – Tread depth approx. 10 mm throughout Matching 3-axle DOLLY Hydraulically suspended axles Modifications, prior sale, and errors expressly reserved. The description serves for general vehicle identification and does not constitute a guarantee in the legal sense. The contractual vehicle specification is binding. Our offer is generally without new TÜV inspection. If a new TÜV inspection is desired, we are happy to provide an offer from our partner workshops! The vehicle may be covered with advertising stickers and/or decals. Our general terms of delivery and payment apply.

Stanje: novo, največja dovoljena obremenitev: 49.000 kg, skupna masa: 60.800 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable Loading Platform: Isdpfx Aish Etf Re Ssig - Loading platform, extendable design with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, checker-plate covering above the axles Two-Part Removable Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulic side-shift - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two fixed axles and two steering axles (self-steering), air suspended, with drum brakes, raise/lower function - Self-steering axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tool kit - Tyre size 235/75 R 17.5 Brake System: - Braking system according to EU regulations with EBS-E (4S3M) Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-tone topcoat using 2-component (2K) paint in Nova grey Electrical System: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S, and 15-pin sockets Included Accessories: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holders on the front wall - Mount at the rear section of the gooseneck for ALU approach ramps - Galvanized folding supports underneath the loading platform chamfer - One holder for warning beacon - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the side, red on extension and rear, according to EU regulations - Electro-hydraulic power unit - At the gooseneck and ramps (left/right) a holder each for warning signs including socket - Control valves for the ramps mounted on the right side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, two 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Galvanized, extendable platform wideners approx. 230 mm per side - Lift axle on the front axle with control system - 20 x 20 mm square climbing bars - BEKAMAX central lubrication system - Four warning signs extendable by approx. 400 mm eac

Stanje: novo, največja dovoljena obremenitev: 25.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment specification. Full specification available upon request. Gooseneck * Gooseneck in SNT design to optimize loading area length * Length approx. 3,750 mm, hydraulically lift-/lowerable, as well as detachable * Technical fifth-wheel load: 25,000 kg For tractors: 4 x 2 and 6 x 2 Kessel bridge * Low bed designed as telescopic Kessel bridge SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * Supply lines are routed protectively within the telescopic beams and automatically adjust to the respective low bed length Rear chassis * Short version with closed outer frame and tread plate cover Iijdpfx Aisv Sw E Aj Sjg * Chassis with excavator recess, closed in the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twinned. Load index 143/141J (146/146F) Brake system * WABCO brand, EBS-E according to EU regulations, WITHOUT connection cable to tractor unit Paintwork * 6-coat final treatment * Complete steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 layers of 2K (acrylic) paint, single colour, then cavity sealing with special wax Trailer colour * RAL 3002 Carmine red * Rim colour: silver-grey * Side wall colour: Aluminium-natural Accessories included * Steel front wall, plug-in, approx. 400 mm high * 3 kW electro-hydraulic pump unit for hydraulic operation, except for hydraulic winches. Without installation of supply connectors at the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck front wall * Outer beams of the gooseneck with mounting holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2 inch kingpin * Hydraulic traverse for supporting the gooseneck on the tractor or a dolly * Air connection with air pistol on the gooseneck * 1 pair of steel ramps with climbing cleats and retaining bolts to bridge the low bed attachment hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * At the outer beams of the loading area, prepared for removable loading floor * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the inside outer beams of the loading area * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the outermost beams of the loading area (LC 10,000 daN) * Cut-outs over the lashing rings on the upper flange of the outer beams * Mechanical pin-lug coupling from the low bed to the running gear, for changing the loading area or installing extension beams. With electro-pneumatic-hydraulic couplings * Outer beams of the low bed with painted-on sand layer for anti-slip protection * 2nd driving height for upper drive position, max. ± 50 mm from the normal driving position, without installation of controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from low bed to excavator recess (LC 10,000 daN) * Front and rear chamfered edge