Faymonville Max Trailer 2-Achs-Tiefbett Mit Pendelachsen nakup rabljenega (57.288)

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Partial equipment listing. Full equipment details available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Two-part steel ramps: Rcsdpfxjy Auhuj Alzod * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism * Maximum load per pair: 30,000 kg Landing legs: * JOST landing gears (manual) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated via reverse gear and manually * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations with EBS-E (2S2M) without connectors to the tractor unit Steel structure: * Steel construction made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final coating with 2 layers of two-component topcoat, single colour in RAL 3002 carmine red, in accordance with RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Wheels in silver Including accessories: * One bracket for warning signs on both sides at the gooseneck and at the rear, including socket * 1 spare wheel holder under the loading area on the right-hand side * 2" kingpin * Galvanized steel front wall * Yellow-red air couplings on the galvanized connector strip at the front * 4 wheel chocks with holders on the front wall * 3 height-adjustable wooden planks * Galvanized folding supports under the loading area bevel * Bracket for a rotating beacon at the rear of the trailer * Height-adjustable tarpaulin frame (approx. 3,960 mm) * Galvanized front wall with tensioning mechanism for sliding curtains, height-adjustable by approx. 400 mm * EDSCHA roof, forward-sliding, on aluminium roof beam profiles (bolted with front and rear wall) * 3 pairs of sliding stakes in the loading area * Superstructure can be hydraulically widened at the rear to left and right by approx. 750 mm * Sliding roof with liftable portal carrier * Sliding tarpaulin with approx. 700 mm slack in length, with tensioning straps spaced approx. 600 mm

Stanje: novo, največja dovoljena obremenitev: 37.980 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with approx. 45° beveled front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform (extendable version): Rcedpfx Aloy Aufmozod * Extendable loading platform with rear chamfer approx. 1,000 mm x 8° * 6 pairs of folding-out lashing rings (LC 5,000 daN) * 3 pairs of folding-out lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick, with checker plate over the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t static load) Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit is via the standardised EBS interface per ISO 11992. For correct display, the tractor unit must be able to transmit and display these data. Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock activated by reverse gear and manually * Air suspension with lift/lower valve * Axle tools Brake system: * Brake system compliant with EU regulations with EBS-E (2S2M), no connecting lines to the tractor unit Steel construction: * Steel construction made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically shot-blasted after welding with blast wheel machine * Secondary blasting with corundum for optimal coating adhesion * Final painting with 2 layers of 2K topcoat, single colour RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver-grey * Rear section metallized and painted in RAL 9010 (pure white) * Paint system tested in salt spray test per ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights synchronized with the indicator * ASPÖCK-UNIBOX at the front connector rail with sockets: 24N, 24S, & 15-pin according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel carrier in front of the front wall * Yellow-red air couplings on the galvanized front connection rail * 4 chock blocks with holder at the front wall * Mount at the rear of the gooseneck for ALU approach ramps * Galvanized folding supports under the loading platform rear chamfer * At the gooseneck and on the rear panel, left and right, each with a bracket for warning signs including socket * Load gauge for determining axle loads with load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable. (Superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C

Stanje: novo, največja dovoljena obremenitev: 47.300 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area in extendable design with rear chamfer approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * Recesses in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate flooring above the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Rcsdpfx Aeyvnfgjlzed Tyres: * Tyres 235/75 R 17.5 3PMSF, manufacturer of our choice Axles: * BPW axles, two rigid axles, two self-tracking axles, air suspension, drum brake, with lifting/lowering function * The self-tracking axles can be locked for reversing by electro-magnetic reverse lock via reverse gear or manually * Axle tools Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Premium and durable corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc dust primer * High-quality two-component (2K) topcoat, single colour, RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2-inch king pin * Galvanised steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanised connection strip at the front * Mount in the rear area of the gooseneck for ALU loading ramps * Galvanised folding supports under the rear chamfer of the loading area * Holder for a beacon at the rear of the trailer * On the gooseneck and at the rear end panel, left and right, holders for warning signs including socket * TPMS tyre pressure monitoring system according to ECE R 141 * On the gooseneck, plug-in aluminium side walls and tailgate, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Body length approx. 2,560 mm) * Galvanised toolbox integrated into the chamfered gooseneck * 3 pairs of WADER container pockets recesses in the loading area for a 20' (30') or 40' container * Sliding hooks for aluminium loading ramps at the rear of the vehicle * 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * Galvanised extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with control via TEBS E depending on the current axle load and current loading status * 2 LED reversing lights mounted on the rear end panel * 2 pairs Ferry-

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full stock of immediately and soon-available vehicles on our website. Selected features listed below. Complete specification available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Load area: * Load area hydraulically raisable and lowerable after the gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tensioning straps (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checkered plate surface above the axles Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections. Hydraulic lifting system, hydraulically extendable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle Rsdeyhkqzepfx Alzjcd * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout, activated by reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Tyres: * 235/75 R 17.5 3PMSF – Brand of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Wheels in silver-grey Included equipment: * 2" kingpin * One galvanized steel front wall, approx. 400 mm high * Grating surface in the gooseneck’s chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the load area’s chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Sand coating applied as slip protection to the checkered plates above the kingpin and loading area * Electro-hydraulic power unit under the rear of the load area * On the gooseneck: removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The galvanized rear stakes are removable. (Body length approx. 2,560 mm) * One electric cable winch with radio remote control, approx. 5,400 kg line pull, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for guiding the winch cable on the neck without a deflection roller * One galvanized toolbox integrated into the chamfered gooseneck, with opening for winch * Grating surface on gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for approx. 100 x 50 mm slip-in stakes in the outer frame of the loading area * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition * 7 pairs of... [Text truncated - please provide remaining content for further translation if needed.]

Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Approx. 30 mm thick hardwood flooring Loading platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - 235/75 R17.5 3PMSF tyres, manufacturer of our choice - TPMS – Tire Pressure Monitoring System according to ECE R 141 - Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992 - The tractor unit must be capable of transmitting and displaying these data for correct indication. Axles: - BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicators - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made from high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with shot-blast machine after welding - Second blasting with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection - Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavities sealed with special wax Including the following accessories: - On both the gooseneck and at the rear left and right, one holder for warning boards, including socket - Spare wheel holder in front of the bulkhead (without spare wheel) - 2" king pin - One galvanized steel front wall, approx. 400 mm high Rcsdpsw Tpq Dsfx Alzjd - Yellow-red air couplings at the galvanized connection panel at the front - Galvanized folding supports under the rear slope of the loading platform - Hardwood rear impact protection from gooseneck rear wall to loading platform - 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN) - On the gooseneck, aluminum side and rear walls

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full selection of vehicles available for immediate or short-term delivery on our website. Extract from the equipment list. Complete equipment details available on request. Gooseneck: * Gooseneck with beveled corners at the front approx. 45°, and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of lashing rings, foldable outward (LC 5,000 daN) * 2 pairs of lashing rings, foldable outward (LC 10,000 daN) * 1 pair of lashing rings, foldable inward at the central beam front (LC 10,000 daN) * Cutouts in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating floor C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate covering Two-part Steel Ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with grating floor C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp segments * Hydraulic lifting device, hydraulically movable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated by reversing gear or manually * Air suspension with lift and lower valve Braking System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Tyres: * Tyres 235/75 R 17.5 3PMSF. Brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paintwork with 2 coats of 2-component topcoat, solid color in RAL 3002 Carmine Red, according to RAL system 841GL * Rims in silver grey Included Accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * Grating floor on gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating floor on platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Electric-hydraulic power pack underneath the rear of the platform * On the gooseneck, aluminum side panels and rear panel, plug-in, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One electric winch with radio remote control, approx. 5,400 kg pulling capacity, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for anchoring winch cable on the gooseneck without pulley * One galvanized toolbox, integrated in the beveled gooseneck with an opening for winch passage * Grating floor on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) Rjdpsyhkrrjfx Alzocd * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm on the outer frame of the platform * Lift axle on the front axle with TEBS E control based on current axle load and loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Stanje: rabljeno, največja dovoljena obremenitev: 19.080 kg, skupna masa: 28.480 kg, konfiguracija osi: 2 osi, prva registracija: 08/2025, naslednji pregled (TÜV): 08/2026, POZOR: upravljati samo s kipo hidravliko! BPW 10t osi, 2 krmiljeni osi, POZOR: upravljati samo s kipo hidravliko! Višina sedla 1,25 m, POZOR: upravljati samo s kipo hidravliko! Višina sedla 1,25 m, hidravlično 1400x700 + ročno 700, Rcodpfxeykgkco Alzjd

Stanje: rabljeno, lastna masa: 11.880 kg, največja dovoljena obremenitev: 49.920 kg, konfiguracija osi: 3 osi, prva registracija: 05/2026, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Vratni del (»swan neck«): - Vratni del z zadnjim naklonom približno 750 mm x 10° - 3 pari pritrdilnih obročev (nosilnost 5.000 daN) - Obloga iz trdega lesa, debeline 30 mm Nosilna ploščad: - Nosilna ploščad v izvlečni izvedbi z zadnjim naklonom približno 1.000 mm x 8° - 5 parov pritrdilnih obročev, ki se odklopijo navzven (nosilnost 5.000 daN) - 3 pari pritrdilnih obročev, ki se odklopijo navzven (nosilnost 10.000 daN) - 1 par pritrdilnih obročev, nameščenih vodoravno na sprednji strani nosilne ploščadi (nosilnost 10.000 daN) - Odprtine na zunanjem okvirju nosilne ploščadi za pritrditev zateznih pasov (nosilnost 2.000 daN) - Obloga iz trdega lesa, debeline približno 48 mm, nad osmi je obloga iz profilirane pločevine Rampe: - En par pocinkanih, dvodelnih jeklenih ramp, približno 2.750 + 1.400 x 800 mm, z oblogo iz trdega lesa, debeline približno 48 mm - Rampa z hidravlično dvižnimi in zložljivimi deli rampe, hidravličnim dvigalom in hidravlično premikalnim mehanizmom - Največja obremenitev na par: 40.000 kg Podporni noge: - JOST podpirne noge (mehanske) z 2-stopenjskim menjalnikom za dvigovno silo 24 t (testna obremenitev 50 t) Osi in pnevmatike: - BPW osi, dve osi fiksni, dve osi krmilni - Z zračno vzmetjo, z bobnastimi zavorami, z funkcijo dvigovanja/spuščanja - Krmilne osi s elektromagnetno blokado pri vzvratni vožnji, ki se aktivira s prestavo za vzvratno vožnjo ali ročno - Sistem za nadzor tlaka v pnevmatikah (TPMS) v skladu s standardom ECE R 141 - Pnevmatike 235/75 R17.5 Barvanje: - Peskanje s korundom za optimalno oprijemljivost prevlečnega sistema - HRM metalizacija celotnega šasija vozila z ZINACOR 850 (85 % cink/15 % aluminij) - Končni premaz z 2 slojema 2K lakom, enobarvno v barvi DB 7350 Novograu Dodatna oprema: - Na vratnem delu in na zadnji strani, levo in desno, po en nosilec za opozorilne table, vključno z vtičnico - En rezervni zagon z nosilcem - 2" kraljevska glava (King Pin) - En pocinkani jekleni sprednji panel, visok približno 400 mm Rjdpfx Ajzp Ntvjlzjcd - Na pocinkani priključni letev spredaj, rumeno-rdeče zračne sklopke - 4 podložni klini z nosilcem - Pocinkani, zložljivi podporni noge pod naklonom nosilne ploščadi - En nosilec za krožno luč na zadnji strani prikolice - Pokrovne plošče za zapiranje prostora med rampami in nosilno ploščadjo - Bela odsevna trak v skladu z evropskimi predpisi, bočno in na izvlečni plošči, zadaj rdeč - Elektro-hidravlična agregat zadaj, pod nosilno ploščadjo - Upravljalni ventili za rampe, nameščeni na desni strani prikolice - En odbijač na zadnji strani - Evropske odsevne table (rdeče-rumene) na zadnji strani prikolice - Navodila in opis na USB pomnilniku - Štiri opozorilne table, ki se iztegnejo za približno 400 mm, približno 423 x 423 mm z pozicijsko lučjo - Na vratnem delu lahko pritrdite ALU stranske in zadnje stene, približno 2.440 x 400 mm - Zadnje, pocinkane priključne lege so odstranljive (dolžina nadstavka približno 2.560 mm) - 4 pari WADER stranskih vreč na nosilni ploščadi za 1x 20-stopalni, 2x 20-stopalni ali 1x 40-stopalni kontejner - 7 parov stranskih vreč za priključne lege 100 x 50 mm na zunanjem okvirju nosilne ploščadi - Razširitve, pocinkane, iztegljive za približno 230 mm na vsaki strani - Dvigni os na sprednji osi, upravljanje preko TEBS-E, odvisno od trenutne obremenitve osi in trenutnega stanja obremenjenosti - Kvadratne lestve 20 x 20 mm, v razmiku 200 mm, na zunanjem okvirju naklona nosilne ploščadi - Na profiliranih pločevinah na vratnem delu in na nosilni ploščadi nanesen

Stanje: rabljeno, največja dovoljena obremenitev: 25.600 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2027, Oprema: ABS, Izdelki iz serijske opreme. Celotna oprema na zahtevo. Priznati del Priznati del Light, dolžina cca 4.080 mm Priznati del, hidravlično dvigljiv/spustljiv in odklonljiv Za SZM: 4 x 2 in 6 x 2 Nizka platforma Nizka platforma, zasnovana kot teleskopski most za bager z iztegom spredaj in mehanskim zaklepom. Dolžina x širina cca 6.350 mm x 1.300 mm Podvozek zadaj Podvozek zadaj v kratki izvedbi z zaprtim zunanjim okvirjem in jekleno ploščo z bagerjem, ki je v zadnji polovici zaprta za namestitev rezervoarjev za zrak Osi in vzmetenje BPW osi in vzmetenje, vse osi hidravlično-mehansko prisilno usmerjene Tehnologija osne obremenitve: 12.000 kg Zračno vzmetenje z ventilom za dvig in spuščanje Orodje za os Pnevmatike 235/75 R 17.5 3PMSF, dvojne pnevmatike Indeks obremenitve 143/141J (144/144F) Zavorna naprava Zavorna naprava znamke WABCO EBS-E v skladu z direktivami EU Brez povezovalnega kabla za vlečno enoto Barvanje 6-K končna obdelava Celotna jeklena konstrukcija, peskana po varjenju 1 sloj temeljne barve na cinkovi bazi, 1 sloj prajmerja za oprijem Končni premaz z 2 plastmi dvokomponentne barve (akril), enobarvna v RAL 3002 karminsko rdeči barvi, nato pa zapiranje votlin s posebnim voskom. Platišča v srebrni barvi Dodatna oprema Rcjdpfx Aozlmkwelzjd Jeklena sprednja stena, vstavljiva, cca 400 mm visoka Priključna letev za napajalne kable do SZM, nameščena na višini zunanjega profila okvirja Okrogla NATO vtičnica na priključni letev spredaj (Maeler & Kaege VG 96 917) 3 kW elektrohidravlična enota za upravljanje hidravličnih funkcij, razen hidravličnih vitlov 3 pari vtičnih pritrdilnih obročev na priznatem delu (LC 5.000 daN) 2 para varjenih pritrdilnih obročev LBS 3 (LC 6.000 daN), spredaj cca 600 mm za sprednjo steno in zadaj na priznatem delu 2 para varjenih pritrdilnih obročev LBS 3 (LC 6.000 daN), na zunanjem okvirju priznačnega dela Na priznačnem delu 2 para vtičnih aluminijastih stranskih desk, cca 400 mm visoke, eloksirana izvedba Na priznačnem delu ena vtična aluminijasta zadnja stena, cca 400 mm visoka, eloksirana izvedba Nad priznačnim delom cca 12 mm debel premaz Delignit 2 palčni kraljevi zatič Hidravlična prečka za oporo priznačnega dela na SZM ali priklopniku Zračna priključnica z zračno pištolo na priznačnem delu Možnost dostopa na priznačni del 2 para vtičnih žepov za nosilce na priznačnem delu, za vtične nosilce cca 100 x 100 mm Na notranji cevi zunaj, navojne luknje za pritrditev vijačnih pritrdilnih obročev M24 (LC 8.000 daN) 2 para vijačnih pritrdilnih obročev M24 (LC 8.000 daN), vključno Na zgornjem pasu zunaj cca vsakih 1.200 mm možnost obešanja ø26 mm za vijačne obroče (LC 8.000 daN) 10 parov pritrdilnih obročev na zunanjem nosilcu RBS-5 (LC 10.000 daN), pod in med podaljški Zložljivi, iztegljivi podaljški, blokirni na cca 2.550/2.750/3.000 mm, vklj. jeklene podloge v deljeni izvedbi, z leseno oblogo Poševnost spredaj na podvošku, cca 350 mm x 12°, vključno z integriranimi nosilnimi letevami spredaj in zadaj za dodatne rampe 2 para pritrdilnih obročev z zadrževalno vzmetjo na prehodu od nizke platforme do bagerja (LC 10.000 daN) 3 pari vtičnih pritrdilnih obročev v zunanjem okvirju podvoška, zložljivi navzven: spredaj in zadaj po 1 par (LC 5.000 daN), v sredini 1 par (LC 10.000 daN) 2 para pritrdilnih obročev LBS-3 (LC 6.000 daN) varjeni nad

Stanje: novo, skupna masa: 3.500 kg, Insulated high-capacity container – internal height 2,320 mm, insulated ceiling. Container dimensions: 2,991 x 2,200 x 2,591 mm Internal height: 2,320 mm Paint: RAL 7016 The container is insulated: • Floor: 60 mm mineral wool • Roof: 60 mm mineral wool • Interior: steel sheeting, including electrical installations • 1 distribution box • Double power outlets Rjdpfxeh N Uuho Alzjcd Large display window, double aluminum rear door. Trailer fully galvanized, tandem axle, 4 container locks, Triplex front wheel, full LED lighting all around, sequential LED indicators, 5-chamber aluminum rims. Delivery available within Germany, Austria, and Italy.

Stanje: rabljeno, največja dovoljena obremenitev: 25.260 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2024, naslednji pregled (TÜV): 04/2027, Oprema: ABS, Izvleček opreme Nakladalna površina * Nizkopodno z osrednjim nosilcem v izvlečni izvedbi Rsdpfx Aezdxlkjlzocd * Dolžina cca 6.750 mm * 5 parov zložljivih priveznih obročev navzven (LC 5.000 daN) * 1 par zložljivih priveznih obročev navzven (LC 10.000 daN) * 1 par ležečih priveznih obročev zadaj na nakladalni površini (LC 10.000 daN) * Dovodne cevi so zaščitene znotraj osrednjega nosilca in se prilagajajo posamezni dolžini nizkopodnega dela Labodji vrat * Dolžina ca. 3.900 mm * Labodji vrat hidravlično dvižen/spuščen ter snemljiv * Tehnična nosilnost sedla: 23.000 kg Podvozje zadaj * V kratki izvedbi z zaprto zunanjo ramo in rebrasto pločevino * Podvozje z bagerskim izrekom, ta je v zadnji polovici zaprt za namestitev zračnih rezervoarjev * 2 para zložljivih priveznih obročev navzven (LC 5.000 daN) * 1 par zložljivih priveznih obročev navzven (LC 10.000 daN) Preme * BPW preme, hidro-mehansko prisilno vodenje * Tehnična nosilnost posamezne preme: 12.000 kg * Zračno vzmetenje z dvigalnim in spuščalnim ventilom * Orodje za preme Pnevmatike * 245/70 R 17.5 3PMSF * Znamka po naši izbiri, nosilni indeks (146/146F) Zavorni sistem * V skladu z EU predpisi z EBS-E (2S2M), brez povezovalnih cevi do vlačilca Jeklena konstrukcija * Iz visoko trdnostnih drobnozrnatih jekel * Kakovost jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa) Barvanje * Visokokakovosten 2-komponentni premaz (2K) * Končni premaz enobarvno v RAL 3002 karmin rdeči Vključuje naslednjo dodatno opremo * 2-colski kingpin * Pocinkana jeklena prednja stena, cca 400 mm visoka * Nosilec za rezervno kolo pred prednjo steno * Na pocinkani priključni letvi spredaj rumeno-rdeče zračne spojke * 4 zagozde z nosilcem (± 5 kg) * Daljinsko krmiljenje osi spredaj in zadaj prek žične daljinske upravljalnice z usmerjanjem, brez vgradnje v vlačilec * Elektro-hidravlični agregat (± 45 kg) * Rumeni odsevni trak v skladu z EU predpisi na strani, izvleku in zadaj na priklopniku * 1 leseni blok cca 500x250x200 mm * Nosilna letev za alu rampo na zadku vozila * Nosilec za rotacijsko luč na zadku priklopnika * Blatnik na zadku priklopnika * Evropske odsevne table (rdeče-rumene) na zadku priklopnika * Na labodjem vratu in zadnji plošči levo in desno nosilec za opozorilne table s vtičnico * Priročnik in opis na USB ključku * Nalepke za maksimalno hitrost 80 km/h zadaj in obojestransko * Tlačni manometer za določitev obremenitve prem, vključno z diagramom obremenitev Vključuje posebno opremo * Na labodjem vratu alu stranske in zadnja stena, snemljiva, cca 2.440 x 400 mm (D x V) * Zadnji pocinkani vstavljivi stojniki odstranljivi (dolžina nadgradnje cca 2.560 mm) (± 46kg) * Na labodjem vratu ločen zračni priključek z zračno pištolo * 2 delovni žarometi s stikalom na priklopniku, nameščeni na podestu labodjega vratu levo in desno * 6 parov žepov za stojnike cca 100 x 50 mm v zunanjem okviru nakladalne površine * 2 para v zunanjem okviru podvozja (± 29 kg) * Razširitve pocinkane, izvlečne za cca 230 mm na vsaki strani (± 262 kg) * Hidravlični priključki od labodjega vratu do nizkopodnega dela z večsmerno spojko namesto navojnih spojk * Centralni sistem mazanja z 2 črpalkama BEKAMAX (Pico) z univerzalno mastjo NLGI-2 in odstranljivo zaščito okoli črpalke (± 26 kg) * 2 para WADER kontejnerskih žepov na nakladalni površini za 1x20’ kontejner (± 20 kg) * Snemljiva pocinkana vmesna miza z 1 parom WADER kontejnerskih ...

Stanje: novo, največja dovoljena obremenitev: 96.500 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 26.900 mm, skupna širina: 2.750 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Rcodezahp Sjpfx Alzjd Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Hydraulically lift/lowerable and detachable gooseneck, approx. 3,650 mm long * For tractor units: 6x4 or 8x4 * Truck hydraulic connection with flow control (20 l/min), incl. gantry for supply line suspension; the tractor unit tank must have at least 80 l capacity * With MAX Trailer coupling units; otherwise, coupling units to be provided ex works by the customer * Gantry with winch for spare wheel mounted at the front of the gooseneck * 3.5-inch king pin * Steel front wall approx. 400 mm high * Removable aluminium side and rear boards on the gooseneck, approx. 400 mm high, anodised finish * Control lever on the gooseneck protected by a folding cover * Operator area lighting at gooseneck, with on/off switch * One 7-pin socket each at the left and right rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for one gooseneck with standard NLGI-2 grease * Hydraulic connections from the gooseneck to the low-bed via screw couplings * Access steps on the gooseneck * Four warning panels extendable by approx. 1,000 mm (approx. 423 x 423 mm) each, with one LED position lamp and bracket for beacon * Mounting adapters for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 hp) at 3,000 rpm * Hydraulic connecting lines between powerpack and connector plate at the gooseneck * One LED worklight left and right on the rear plate of the gooseneck, individually switchable * Radio remote control for: - Operating the powerpack, start/stop of diesel engine. - Operating remote steering (in addition to cable remote), with 2 LED indicator lights on receiver for single-track control. - Lift/lower gooseneck. - Lift/lower suspension of running gear 2-axle front module: * Bolt-eye coupling front and rear. Length: approx. 2,970 mm. Module width: approx. 2,750 mm * BEKA-MAX central lubrication system for 2-axle module with standard NLGI-2 grease (not connected to steering rods) * One 7-pin socket each at the left and right rear of the front module for warning signs * Platform surface with sand coating as slip protection * Yellow reflective tape in accordance with EU regulations at the sides, on the extension, and at the rear of the trailer * One 7-pin socket for warning signs, left and right on the front module, in the axle area * Extendable outriggers approx. 230 mm per side for the 2-axle module * 1 pair M42 threaded blocks between the axles of the front module * 1 pair brackets for plug-in warning panels in the stake pockets of the exterior frame of the loading area Loading platform: * 6-axle, double telescopic loading platform with bolt-eye coupling at the front and rear chamfer approx. 500 mm x 8° * Platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Base width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the platform with standard NLGI-2 grease * Platform surface with sand coating as slip protection * 11 pairs of recessed lashing rings in the external frame of the loading platform, foldable outwards (LC 10,000 daN) * Permanently welded intermediate table, approx. 500 mm long * 1 pa...

Stanje: novo, lastna masa: 12.000 kg, največja dovoljena obremenitev: 54.000 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable loading platform with rear bevel approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the platform (LC 10,000 daN) - Cut-outs in the outer frame for tensioning straps (LC 2,000 daN) - Hardwood floor approx. 48 mm thick, checker plate over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Brake system: - WABCO brake system according to EU regulations with EBS-E (4S3M) Steel construction: - High-strength fine-grained steel chassis Axles and tires: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - Axle tool kit - TPMS tire pressure monitoring system to ECE R 141 - Tires: 245/70 R 17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, operated from front and rear using a cable remote control with push buttons, with single-track monitoring of axles - European reflective panels (red-yellow) on trailer rear - White reflective tape in accordance with EU regulations on sides and on extension, rear red - Mountings on gooseneck and rear left/right for warning signs, incl. socket - Galvanized extensions, pull-out approx. 230 mm per side - Mount for rotating beacon at rear of trailer - Galvanized folding supports under the rear slope of the loading area - Mudflap at the rear of the trailer - Manual and documentation on USB stick - BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 and removable pump guard - Removable ALU side boards and rear board on gooseneck, approx. 2,440 x 400 mm - Rear removable, galvanized stanchions (superstructure length approx. 2,560 mm) - INOX toolbox 1,350x400x400 mm on gooseneck Rcjdpeykpbkofx Alzod - Note: toolbox covers oil filler cap - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft or 1x 45ft container - 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame - Sliding mounting bar for ALU loading ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the sloping rear section - Lift axle on front axle with control via TEBS-E depending on current axle load and load condition - Four extendable warning boards, approx. 400 mm, size approx. 423 x 423 mm, each with position light - Mounting for rotating beacon on the warning boards - Radio remote control for forced steering, additionally to cable remote, with indicator lights on receiver for single-track monitoring - Checker plate surfaces on gooseneck and loading area with painted-on sand coating for slip resistance - 80 km/h speed stickers on rear and both sides - Load gauge for axle load measurement, incl. load diagram

Stanje: novo, največja dovoljena obremenitev: 25.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment specification. Full specification available upon request. Gooseneck * Gooseneck in SNT design to optimize loading area length * Length approx. 3,750 mm, hydraulically lift-/lowerable, as well as detachable * Technical fifth-wheel load: 25,000 kg For tractors: 4 x 2 and 6 x 2 Kessel bridge * Low bed designed as telescopic Kessel bridge SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * Supply lines are routed protectively within the telescopic beams and automatically adjust to the respective low bed length Rear chassis * Short version with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twinned. Load index 143/141J (146/146F) Brake system * WABCO brand, EBS-E according to EU regulations, WITHOUT connection cable to tractor unit Paintwork * 6-coat final treatment * Complete steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 layers of 2K (acrylic) paint, single colour, then cavity sealing with special wax Trailer colour * RAL 3002 Carmine red * Rim colour: silver-grey * Side wall colour: Aluminium-natural Accessories included * Steel front wall, plug-in, approx. 400 mm high * 3 kW electro-hydraulic pump unit for hydraulic operation, except for hydraulic winches. Without installation of supply connectors at the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck front wall * Outer beams of the gooseneck with mounting holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2 inch kingpin * Hydraulic traverse for supporting the gooseneck on the tractor or a dolly * Air connection with air pistol on the gooseneck * 1 pair of steel ramps with climbing cleats and retaining bolts to bridge the low bed attachment hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * At the outer beams of the loading area, prepared for removable loading floor * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the inside outer beams of the loading area * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the outermost beams of the loading area (LC 10,000 daN) * Cut-outs over the lashing rings on the upper flange of the outer beams * Mechanical pin-lug coupling from the low bed to the running gear, for changing the loading area or installing extension beams. With electro-pneumatic-hydraulic couplings Rjdpfev Sw E Ajx Alzocd * Outer beams of the low bed with painted-on sand layer for anti-slip protection * 2nd driving height for upper drive position, max. ± 50 mm from the normal driving position, without installation of controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from low bed to excavator recess (LC 10,000 daN) * Front and rear chamfered edge

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.000 kg, največja dovoljena obremenitev: 20.000 kg, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, vzmetenje: zrak, Leto izdelave: 2016, Polpriklopnik z nizkim podom CAMRO CN 26.20B / Tiefbett / Dolžina 16 m Letnik 2016 Rsdpfozmv T Rjx Alzscd Tehnični podatki Dovoljena skupna masa 31.000 kg Teža 11.000 kg Nosilnost 20.000 kg Dolžina glavne površine 665 cm Podaljšljiv za 405 cm Dolžina zadnje ploščadi 250 cm Dolžina sprednje ploščadi 305 cm Širina 110 cm Prikolica se razširi za 70 cm na vsako stran. Zračno vzmetenje Nosilec za rezervno kolo 2 osi Zelo dobro stanje, popolna dokumentacija.

Stanje: novo, največja dovoljena obremenitev: 14.050 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 800 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, PRASQ 18 prikolica z vrtljivo ploščo in stranskimi ograjami Podvozje iz varjenih vzdolžnih in prečnih nosilcev Vzmetna os približno 1300 mm Dovoljena skupna masa približno 18.000 kg Višina priklopne glave (sredina) približno 800 mm brez obremenitve Previs približno 710 mm spredaj (razdalja od čelnega okvirja do sredine sprednje osi) Previs približno 950 mm zadaj (sredina osi do zadnjega roba čelnega okvirja) Dolžina podvozja približno 6000 – 8000 mm (čelni okvir – čelni okvir), standardno 7200 mm Rcsdpeg Dkx Njfx Alzsd Širina podvozja približno 2480 mm (širina tovornega prostora), skupna širina približno 2550 mm Višina brez obremenitve približno 1300 mm (zgornji rob tal) Višina zunanjega okvirja: Višina približno 125 mm, debelina 4 mm, z zunanjo poševnostjo in luknjami za pritrditev vsakih 200 mm, brez pritrdilnih obročev Zaščita pred udarci viličarja v obliki jeklene plošče na levi in desni strani zunanjega okvirja Vlečna vilica: Vlečna vilica 18 t, fiksna, proizvajalec po naši izbiri Razdalja od sredine vlečne ojačevalnice do sprednjega roba čelnega okvirja glede na zahteve stranke Premer vlečne ojačevalnice 40 mm (50 mm na voljo opcijsko) Osi: Znamka (SAF/BPW/JOST) 9 t, 22,5", z veliko diskovno zavoro, brez dviganja in spuščanja (skupna višina približno 200 mm) Zavora: Zavorni sistem EBS, proizvajalec Knorr ali Wabco Zračne priključke priklopne glave: rdeča in rumena barva Nadzor tlaka v pnevmatikah Pnevmatike: Znamka, 385/65 R 22,5, po naši izbiri, platišče 11,75 x 22,5 Nadgradnja: Stranske ograje v eloksirani izvedbi, višina približno 800 mm Zadnja stranska ograja z dvema zunaj nameščenima zložljivima stopnicama Sprednja stena približno 1200 mm visoka, s kovinsko oblogo, pritrjena z vijaki Talna površina: Sitotiskana talna plošča 27 mm, položena prečno Certifikat za preverjeno obremenitev osi viličarja 7,2 t po standardu DIN EN 283 (9 t na voljo opcijsko) Osvetlitev: Osvetlitev LED 15-polni vtič utripajoča stranska osvetlitev (SML) Dodatna oprema: Polovični blatniki 180° Stranska zaščita na obeh straneh, aluminijast ali plastični profil En plastični klin z nosilcem Prevleka/barvanje vozila Barvanje podvozja v barvi RAL 9005 ali Novagrau 7350 druge barve proti doplačilu (le pri razpoložljivosti barve v prahu) KTL z cinkovo fosfatacijo plus prašno barvanje, najvišja zaščita pred korozijo Vroče pocinkanje (opcijsko) Cena ob dostavi iz tovarne Pozor!!! Slike prikazujejo dodatno opremo Pustite, da vam svetujemo in pripravimo brezplačno in nezavezujočo ponudbo. Možnosti: lizing, financiranje, najem z možnostjo odkupa! Upoštevamo vaše želje! Obrnite se na nas – z veseljem vam pripravimo ponudbo. Pridržujemo si pravico do sprememb in napak.

Stanje: novo, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.730 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, PRSSQ 27 SYS Three-axle Curtainsider with Crosswise Laminated Timber Floor Curtainsider body height laterally: 2,650 mm (from loading platform to lower edge of outer beam) Chassis width approx. 2,480 mm Chassis length approx. 13,620 mm Ride height unladen approx. 1,250 mm at 1,130 mm fifth wheel height COC Chassis frame construction made of welded longitudinal beams and through-fitted cross members Outer frame height approx. 125 mm, 4 mm with groove for lashing rings & lashing holes on the outside 13 pairs of lashing rings (5t certificate) Axles: Manufacturer’s free choice (SAF/BPW) Axle 9t 22.5" with large disc brakes EBS brake system by Knorr or Wabco Tire pressure monitoring system Flashing side marker lights European brand tires 385/65 R 22.5 Body certificate DIN EN 12642 XL valid with two rows of timber slats Certificate for 9t forklift axle load (DIN EN 283) Certificate for 5t per lashing ring Rear portal with 4 internal locking rods Door wings made of steel sandwich profiles Sliding roof with automatic locking, opens from rear 3 sets of side sliding curtains Front wall: steel, 400 mm steel cassette with inner wear plate approx. 2.4 m Lighting system: 24 Volt with LED multifunctional lights Anti-slip phenolic coated floor, 27 mm, crosswise installation Roof tarpaulin – reinforced 12x12 roof fabric Optional with tail lift Optional with internal sideboards Optional with FLEXSTRAP system Optional with pallet box, spare wheel, etc. Rodog Dkxzjpfx Alzecd Body painted in RAL colors as specified Chassis in RAL 9005 or MB 7350, other colors available at extra cost (subject to powder availability) KTL coating with zinc phosphating plus powder, highest corrosion protection Optional: hot-dip galvanized Price ex works Attention! Pictures show special equipment Get professional advice and a free, no-obligation quote. Leasing, financing, or hire purchase possible! We can cater to your individual requirements! Contact us – we are happy to prepare an offer for you. Errors and interim sale reserved!

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 01/2019, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, medosna razdalja: 10.160 mm, barva: rdeča, Leto izdelave: 2019, Oprema: ABS, 1 x dvižna os 3 x krmilna os. Daljinsko upravljanje s pomočjo radia. Hidravlična rampa. Kamera. = Dodatne informacije = Konfiguracija osi Mere pnevmatik: 245/70R17.5 Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: dvojne pnevmatike; profil pnevmatik levo notranji: 50 %; profil pnevmatik levo zunanji: 50 %; profil pnevmatik desno notranji: 50 %; profil pnevmatik desno zunanji: 50 % Zadnja os 2: dvojne pnevmatike; krmilna; profil pnevmatik levo notranji: 30 %; profil pnevmatik levo zunanji: 30 %; profil pnevmatik desno notranji: 30 %; profil pnevmatik desno zunanji: 30 % Zadnja os 3: dvojne pnevmatike; krmilna; profil pnevmatik levo notranji: 40 %; profil pnevmatik levo zunanji: 40 %; profil pnevmatik desno notranji: 40 %; profil pnevmatik desno zunanji: 40 % Zadnja os 4: dvojne pnevmatike; krmilna; profil pnevmatik levo notranji: 60 %; profil pnevmatik levo zunanji: 60 %; profil pnevmatik desno notranji: 60 %; profil pnevmatik desno zunanji: 60 % Teže Lastna teža: 11.344 kg Nosilnost: 54.656 kg Največja dovoljena masa: 66.000 kg Vzdrževanje Tehnični pregled (APK): veljaven do 02.2027 Finančne informacije Cena: Na zahtevo Rjdpfx Aszp Dryolzscd Identifikacija Številka modela: max trailer N/A F-S44 / STEERING = Podatki o podjetju = VSE CENE SO NETO ZA IZVOZ. (Joris Versteijnen NL-DE-GB), (Wouter Greutink NL-DE-GB-ES-IT). Govorimo tudi rusko. Po najboljših močeh se trudimo, da navedemo pravilne informacije. Kljub temu iz navedenih besedil ni mogoče pridobiti pravic.

Stanje: rabljeno, lastna masa: 10.650 kg, največja dovoljena obremenitev: 40.310 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, skupna dolžina: 13.100 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, Za vsak rabljen priklopnik prejmete aktualno in celovito poročilo o pregledu in funkcionalnosti. Gosi vrat: -Gosi vrat s trdo leseno oblogo debeline 30 mm -Gosi vrat zadaj v ravni izvedbi -3 pari pritrdilnih obročev (nosilnost 5.000 daN) Nosilna površina v izvlečni izvedbi: -Nosilna površina v izvlečni izvedbi -5 parov pritrdilnih obročev, ki se zložijo navzven (nosilnost 5.000 daN) -3 pari pritrdilnih obročev, ki se zložijo navzven (nosilnost 10.000 daN) -1 par pritrdilnih obročev, nameščenih v ležečem položaju na sprednji strani nosilne površine (nosilnost 10.000 daN) -Izrezi na zunanjem okvirju nosilne površine za obešanje zateznih trakov (nosilnost 2.000 daN) -Trda lesena obloga debeline približno 48 mm, nad osmi je obloga iz valjane pločevine Osi in pnevmatike: -Osi BPW, dve osi fiksni, dve osi s krmiljenjem -Zračna vzmetenje, s bobnastimi zavorami, z funkcijo dvigovanja/spuščanja -Krmiljene osi z elektromagnetsko blokado za vzvratno vožnjo, ki se aktivira s prestavo za vzvratno vožnjo ali ročno -Orodje za osi -Pnevmatike 205/65 R17.5 -Sistem za nadzor tlaka v pnevmatikah TPMS, v skladu s standardom ECE R 141 Dodatna oprema vključena: -En rezervni kolesni komplet z nosilcem pred čelno steno -2" kraljevska vlečna glava -Pocinkana jeklena čelna stena, približno 400 mm visoka -Na pocinkani priključni letev spredaj, rumeno-rdeče zračne spojke -4 kosi zavor, z nosilcem na čelni steni -Pocinkane zložljive opore pod poševnino nosilne površine -Nosilec za rotacijsko luč na zadnji strani priklopnika -Razširitve, pocinkane, izvlečne za približno 230 mm na stran -Bel odsevni trak v skladu z direktivami EU, nameščen na boku, na izvlečnem delu in zadaj rdeče barve -Na gosi vratu in na zadnji plošči, na levi in desni strani, nosilci za opozorilne table, vključno z vtičnico -Lovilec umazanije na zadnji strani priklopnika -Evropske odsevne table (rdeče-rumene) na zadnji strani priklopnika -Na gosi vratu in na zadnji steni, ALU stranske plošče in zadnja plošča, ki se vstavi, približno 2.440 x 400 mm -Zadnji, pocinkani stranski nosilci so snemljivi. Dolžina nadgradnje približno 2.560 mm -7 parov WADER posod za zabojnike: -1 x 20-stopični zabojnik na nosilni površini -1 x 40-stopični zabojnik na nosilni površini -1 x 40-stopični zabojnik nad gosi vratom -2 x 20-stopični zabojniki Rcedpfxoxwnfmj Alzjd -Podporni blok z 1 parom WADER posod za zabojnike (največja nosilnost približno 20.000 kg) -7 parov posod za stranske nosilce za vstavne nosilce 100 x 50 mm v zunanjem okvirju nosilne površine -Dvignjena os na sprednji osi, upravljanje preko TEBS E, odvisno od trenutne obremenitve osi in trenutnega stanja obremenitve -Pomikalna vstavna letev za ALU rampe na zadnji strani vozila -Na valjani pločevini na gosi vratu in na nosilni površini, nanos plasti peska za preprečevanje zdrsavanja -Štiri izvlečne opozorilne table, približno 400 mm, približno 423 x 423 mm, z pozicijsko lučjo -Na opozorilnih tablah nosilec za rotacijsko luč -Nalepka za omejitev hitrosti 80 km/h zadaj in na obeh straneh -Merilnik obremenitve za ugotavljanje obremenitve osi, vključno s tabelo obremenitve

Stanje: rabljeno, skupna masa: 133.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2023, Oprema: ABS, Trailer - Vehicle Identification Number: XNJ55H5XX23H01262 - First registration: 29.11.2023 DOLLY - Vehicle Identification Number: XNJ33H5XD23H01262 - First registration: 29.11.2023 POWER HYDRAULICS with NATO socket – or machine hydraulics German registration Unladen weight: Trailer: 27,140 kg | DOLLY: 13,200 kg Fifth wheel height: 1,350 mm – Replaceable kingpin – 3.5" Front swing clearance approx. 1,732 mm ---- Hydraulic, detachable and height-adjustable swan neck – Length 4,020 mm Lowbed: Length: 8,000 mm Width: 2,870 mm – Loading height: approx. 560 mm TELESCOPIC extension by 5,800 mm EXPANDABLE up to 3,240 mm Chassis frame: Length: 7,410 mm Width: 2,750 mm – Loading height: approx. 1,100 mm Total length with dolly: 24,622 mm / without dolly: 20,140 mm Excavator trough - dipper stick recess Central lubrication system BROSHUIS axles – PENDLE AXLES with drum brakes with radio remote control 5 x hydraulically suspended and forced-steered axles Axle loads: 5 x 12,000 kg Maximum fifth wheel load: 25,000 kg Tyres: 285/70 R 19.5 – Tread depth approx. 10 mm throughout Matching 3-axle DOLLY Hydraulically suspended axles Rcedpfx Aljx Ialvozod Modifications, prior sale, and errors expressly reserved. The description serves for general vehicle identification and does not constitute a guarantee in the legal sense. The contractual vehicle specification is binding. Our offer is generally without new TÜV inspection. If a new TÜV inspection is desired, we are happy to provide an offer from our partner workshops! The vehicle may be covered with advertising stickers and/or decals. Our general terms of delivery and payment apply.

Stanje: rabljeno, največja dovoljena obremenitev: 23.340 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2002, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.520 mm, skupna širina: 2.540 mm, skupna višina: 2.300 mm, Oprema: ABS, Nooteboom nizkoposteljna prikolica + labodji vrat in 3 krmilne osi Tip: EURO5403 Nosilnost: 23.340 kg Zavore: bobnaste + z odstranljivim labodjim vratom + Vse osi krmiljene z daljinskim upravljanjem Rcjdjy Rvuxjpfx Alzed + Daljinski upravljalnik Nakladalna površina – platforma: 5230 mm Višina od tal: 610 mm Z veseljem vam pomagamo tudi na področju financiranja/leasinga z našimi partnerji. Vse informacije brez garancije. Pridržujemo si pravico do sprememb in vmesne prodaje.

Stanje: rabljeno, lastna masa: 14.995 kg, največja dovoljena obremenitev: 50.805 kg, skupna masa: 65.800 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Leto izdelave: 2023, obratovalna teža: 14.995 kg, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with rear bevel, approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading platform: - Extendable loading platform with rear bevel, approx. 500 mm x 8° - 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 4 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) - 1 intermediate section, 250 mm - Cut-outs in the outer frame of the loading area for inserting tensioning straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, chequer plate over the axles Redjv Hr Axjpfx Alzocd Axles and tyres: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - Tyres 235/75 R17.5 Braking system: - Braking system according to EU regulations with EBS-E (4S3M) Accessories included: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings mounted on the galvanized connection strip at the front - 4 chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Remote steering from front and rear via cable remote control with push buttons, including single-track control of the axles - Mounting for ALU ramps at the rear of the gooseneck - Hot-dip galvanized, extendable side extensions, approx. 230 mm per side - European reflector boards (red-yellow) at the rear of the trailer - White reflective tape as per EU standards on the sides, on the extension, and red at the rear - Bracket for warning signs on left/right of gooseneck and rear panel, incl. socket - Galvanized folding supports under the loading platform’s rear bevel - Holder for a beacon at the rear of the trailer - Central lubrication system with 2 BEKAMAX (Pico) pumps, NLGI-2 standard grease and removable cover for the pump - Mud flap at the rear of the trailer - Manual and documentation - On the gooseneck: insertable ALU side boards and rear wall, approx. 2,440 x 400 mm - Removable galvanized stanchions at the rear (body length approx. 2,560 mm) - 4 pairs of WADER container locks recessed in the loading platform for 1x 20ft, 2x 20ft, 1x 40ft, or 1x 45ft container - 8 pairs of pockets for removable stanchions, 100 x 50 mm, in the outer frame of the loading platform - Adjustable hook rails for ALU ramps at the rear of the vehicle - Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition - Four warning panels, extendable approx. 400 mm, approx. 423 x 423 mm, each with position lamp - Mounting on warning panels for beacon - Radio remote control for remote steering in addition to cable remote control, with indicator lights on the receiver for single-track control - Painted-in sand layer on chequer plates, above the king pin and on the loading area for anti-slip protection - 80 km/h speed limit decal at the rear - Load pressure gauge for axle load determination, including load chart

Stanje: novo, največja dovoljena obremenitev: 36.040 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck in SNT design to optimize loading deck length, approx. 3,750 mm long * Gooseneck hydraulically liftable/lowerable and detachable * For tractor units: 6 x 4 or 8 x 4 Lowbed: * Lowbed with exterior beams, extendable, SUPER LOW design, approx. 8,000 mm long * Lowbed with fixed hardwood flooring approx. 40 mm thick and mechanical locking * Supply lines routed protected within the extendable beams, automatically adapting to the lowbed length * 7 pairs of folding lashing rings outward (LC 10,000 daN) * 6 pairs of threaded mounting blocks on the inner beam for screwable RUD rings Rear chassis: * Rear chassis with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to house air tanks * 3 pairs of folding lashing rings outward (LC 5,000 daN) * 1 pair of folding lashing rings outward (LC 10,000 daN) * 1 pair of horizontal lashing rings, positioned front & rear on the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles with hydro-mechanical forced steering * Technical axle load: 12,000 kg each Redpfxsy Uwu Ij Alzecd * Air suspension with lifting and lowering valve Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer at choice. Load index (146/146F) Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Coating: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Finished with 2 coats of 2K paint, single-colored in RAL 3002 Carmine Red, per RAL System 841GL Includes accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * At the galvanized front connection strip, yellow-red air couplings * Remote axle steering, from front and rear, operated by cable remote control with push buttons, including axle alignment monitoring (without installation on the tractor unit) * Preparation for bolt-on container lockings to accommodate 1 x 20', 1 x 40', or 1 x 45' container on the outer rails. Without container locks * Hydraulic connections from gooseneck to lowbed with a multicoupling instead of screw couplings * Electrohydraulic unit * Spiral cable (approx. 35 mm², approx. 3.5 m in length, max. 250A) for the power supply to the electrohydraulic unit and/or the electric winch, with plug connection (NATO-NATO) between trailer and tractor unit * Yellow reflective tape according to EU regulations, on the sides, extension, and at the rear of the trailer * At the gooseneck front and rear left and right, each with a holder for warning signs, including socket * Manual and documentation on USB stick * Central lubrication system with 2 pumps BEKAMAX (Pico) with standard grease NLGI-2 and removable protection for the pumps * 7 pairs of threaded blocks between the lashing rings under the top flange on the outer rail for mounting screwable RUD rings VLBG-4 * 2nd ride height, approx. 50 mm above standard ride position, selectable via manual control * On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) * Separate air connection with air gun on the gooseneck * A stainless steel toolbox, INOX, approx. 1,350 x 400 x 400 mm

Stanje: novo, skupna masa: 58.000 kg, Leto izdelave: 2026, MAX100 4 A 8.60 U Low Loader Semi-Trailer Rjdpfsg Sk T Dox Alzjcd Technical Specifications Speed: 80 km/h Gross weight: 60,800 kg Fifth-wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Loaded fifth-wheel height: 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle spacing: 1,360 mm Rear steering radius: 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck With front corners chamfered at 45° and rear bevel approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area, extendable version with rear bevel approx. 1,000 mm x 8° 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) 1 pair of horizontal lashing rings at front of loading area (LC 10,000 daN) Hardwood flooring approx. 48 mm thick, checker plate over axles Ramps Two-piece steel ramps One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm thick hardwood covering Ramp with hydraulically folding ramp sections, hydraulic lifting system and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Tyres 235/75 R 17.5 Braking system in accordance with EU standards with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc-dust primer High-quality 2-component (2K) topcoat, single-color finish in RAL shades of your choice Rear section metallized and painted in RAL 9010 (pure white) Landing Gears: JOST mechanical landing gears with 2-speed gearbox for 24 t Lifting capacity (test load 50 t) Steel structure made of high-strength fine-grain steels. Steel Grades: Steel structure made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrics in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Accessories included: One galvanized steel front wall approx. 400 mm high 2" king pin 4 wheel chocks with holder on the front wall Bracket for a rotating beacon at rear of the trailer SAF axles, two fixed axles, one trailing-steering axle, air-suspended, with drum brake, with lifting/lowering function. Trailing steering axle with electro-magnetic reverse lock, can be activated via reverse gear or manually. Axle tools Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports under the bevel of the loading area Mechanical safety lock for the loading area One spare wheel with holder in front of the front wall Yellow reflective tape along the sides, extension and rear of trailer, in accordance with EU regulations. At the galvanized front connection strip, yellow-red air couplings On gooseneck and rear plate left and right, each with mount for warning plates and socket included Mudflap at trailer rear Manual and documentation On gooseneck, plug-in ALU sideboards and rear wall approx. 2,440 x 400 mm (L x H) The rear galvanized stake pockets are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs WADER container locks in the loading area for a 20', 30' or 40' container (± 30 kg) 6 pairs of stake pockets for plug-in stakes

Stanje: novo, lastna masa: 10.300 kg, največja dovoljena obremenitev: 39.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Loading platform after the gooseneck, hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° - Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with chequer plate covering Two-part Steel Ramps: - One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp parts, hydraulic lifting system, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles, Suspension and Tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tires 235/75 R 17.5 3PMSF - TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories Included: - One spare wheel with holder in front of the bulkhead - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings at the galvanized connection strip in front - 4 wheel chocks - Galvanized folding supports under the platform's rear chamfer - A holder for a rotating beacon at the rear of the trailer - Cover plates to bridge the gap between ramps and platform Rcjdpfx Alju Hp Hrszjd - White reflective tape as per EU regulations along the sides of the trailer and red at the rear - Electro-hydraulic unit at the rear, under the platform - At the gooseneck and at the ramps left and right, each with a holder for warning signs, including socket - Control valves for the ramps positioned on the right side of the trailer - European reflective plates (red-yellow) at the rear of the trailer - Manual and description on USB stick - Removable ALU side walls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear, galvanized side stakes are removable (body length approx. 2,560 mm) - An electric cable winch with radio remote control, approx. 5,400 kg lifting force, including 9.5 mm steel cable, 24 m long, with guide roller - Bolted 5 t ring for cable deflection of the winch on the gooseneck without pulley - 2 pairs WADER container pockets in the platform for a 20ft container - 6 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the platform - Lift axle on the front axle with control via TEBS E, depending on actual axle load and loading condition - 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings along the central beam at the rear chamfer (LC 10,000 daN) - Sand coating for slip resistance painted on the chequer plates on the gooseneck and on the platform - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protection - Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm - Speed stickers 80 km/h rear and on both sides - Load manometer for determining axle loads including load chart - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces metallized and hot-coated with ZINACOR 850 (zinc 85% - alu 15%)