Nizki nakladalnik

Meusburger 2-Achs-Jumbo-Tiefbett mit Planenaufbau

Chassis:
- Welded steel frame construction with front and rear frame cranks and a lowered bed without rear chamfer
- Neck and kingpin plate 225 mm
- Lowered bed rated for 25 t point load over 5 m
- Outer frame closed to the outside with welded-on lashing rings for securing
- Interchangeable 2" king pin
- Rear hook-in rail for aluminum ramps

Bodpfxjiu Eu Ns Adtelp
Axles and Tyres:
- BPW low-loader axles, each with a 10 t axle load, air bellows diameter 360 mm
- Air suspension with lifting and lowering function, stroke 220 mm (-60/+160 mm)
- Wabco SmartBoard with ECAS function for 2 coupling heights +100 mm
- S-cam brakes 300/200 mm, asbestos-free brake pads
- Automatic slack adjusters
- IVTM tyre pressure monitoring
- 9 tyres 235/75 R 17.5, tubeless

Steering:
- 1st and 2nd axles hydraulically forced steered via fifth wheel coupling

Floor:
- Multi-layer bonded board floor, 27 mm thick, flush with outer frame and longitudinal beams
- Underside reinforced with GRP coating
- 12 pairs of lashing rings welded in outer frame (8 pairs RUD 8 t – 6 pairs in the lowered bed as well as one pair each on the gooseneck and at the front of the rear aggregate – 2 pairs of 4 t lashing rings on gooseneck and rear aggregate)
- 6 pairs of mushroom anchors in outer frame in the lowered bed
- Storage box with lid in the lowered bed floor, front left and right

Front Wall:
- 25 mm aluminum hollow profiles raised up to the lower edge of the roof with integrated tarpaulin tensioning device

Sliding Tarpaulins:
- Tarpaulin curtains on both sides with integrated vertical and horizontal belts (approx. 600 mm spacing) and stainless steel tension locks
- Adjustable tarp straps (overcentre) up to loading width 4,000 mm including tarpaulin extension with press studs and Velcro fastener
- Tarp extension in driving direction: 300 mm, in height: 750 mm
- Incl. eyelets for separate tarpaulin extension piece
- 1 pair of vertical tarpaulin pockets approx. 1,000 mm long, positioned in the lowered bed at the front crank
- With belt pockets

Rear Wall:
- Steel rear portal frame with side tarpaulin hook-in device
- Aluminum double-wing door, 25 mm thick
- Both door wings fully foldable with door holders
- Each door wing with aluminum double-joint hinge and two recessed grip hollows

Front Corner Posts:
- Roof height, bolted to front side

Central Posts:
- 3 pairs of infinitely adjustable folding posts
- Posts are movable along the entire length via trolley
- Middle posts in the lowered bed also fixable at the rear platform

Roof:
- EDSCHA sliding roof (galvanized) with cross beams movable in both directions (stacked forward inside the cargo area)
- Rear portal cross beam swivels away
- PVC tarpaulin roof without customs closure
- Manually operated hydraulic lifting roof on both sides, lift 450 mm
- Movable lifting roof in positions front (9x50) and rear (9x50), can be driven at increased height
- Including tarpaulin extension and apron at rear
- Roof can be cranked out 900 mm at front wall

Accessories:
- Extendable warning signs (removable at front and rear, with socket) incl. position lights up to loading width 4,000 mm
- Storage for 4 warning signs on inside of front wall, top right and left
- 1 aluminum ladder with holder 2,500 mm long on front wall
- 2 rows of self-securing aluminum slats
- Metal mudguards with splash flaps
- 1 overnight parking plate and 1 ADR plate on rear wall
- BEKAMAX central lubrication system with pump and grease class 2 for approx. 35 lubrication points
- Electrohydraul

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.