Meusburger 2-Achs-Jumbo-Tiefbett Mit Planenaufbau nakup rabljenega (51.787)

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 27.000 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 235/75 R17.5, barva: siv, obratovalna teža: 11.000 kg, Oprema: ABS, Chassis: - Welded steel frame construction with front and rear frame cranks and a lowered bed without rear chamfer - Neck and kingpin plate 225 mm - Lowered bed rated for 25 t point load over 5 m - Outer frame closed to the outside with welded-on lashing rings for securing - Interchangeable 2" king pin - Rear hook-in rail for aluminum ramps Axles and Tyres: - BPW low-loader axles, each with a 10 t axle load, air bellows diameter 360 mm - Air suspension with lifting and lowering function, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights +100 mm - S-cam brakes 300/200 mm, asbestos-free brake pads - Automatic slack adjusters - IVTM tyre pressure monitoring - 9 tyres 235/75 R 17.5, tubeless Steering: - 1st and 2nd axles hydraulically forced steered via fifth wheel coupling Floor: - Multi-layer bonded board floor, 27 mm thick, flush with outer frame and longitudinal beams - Underside reinforced with GRP coating - 12 pairs of lashing rings welded in outer frame (8 pairs RUD 8 t – 6 pairs in the lowered bed as well as one pair each on the gooseneck and at the front of the rear aggregate – 2 pairs of 4 t lashing rings on gooseneck and rear aggregate) - 6 pairs of mushroom anchors in outer frame in the lowered bed - Storage box with lid in the lowered bed floor, front left and right Front Wall: - 25 mm aluminum hollow profiles raised up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding Tarpaulins: - Tarpaulin curtains on both sides with integrated vertical and horizontal belts (approx. 600 mm spacing) and stainless steel tension locks - Adjustable tarp straps (overcentre) up to loading width 4,000 mm including tarpaulin extension with press studs and Velcro fastener - Tarp extension in driving direction: 300 mm, in height: 750 mm - Incl. eyelets for separate tarpaulin extension piece - 1 pair of vertical tarpaulin pockets approx. 1,000 mm long, positioned in the lowered bed at the front crank - With belt pockets Rear Wall: Dodpoiu Eu Nsfx Aqqokr - Steel rear portal frame with side tarpaulin hook-in device - Aluminum double-wing door, 25 mm thick - Both door wings fully foldable with door holders - Each door wing with aluminum double-joint hinge and two recessed grip hollows Front Corner Posts: - Roof height, bolted to front side Central Posts: - 3 pairs of infinitely adjustable folding posts - Posts are movable along the entire length via trolley - Middle posts in the lowered bed also fixable at the rear platform Roof: - EDSCHA sliding roof (galvanized) with cross beams movable in both directions (stacked forward inside the cargo area) - Rear portal cross beam swivels away - PVC tarpaulin roof without customs closure - Manually operated hydraulic lifting roof on both sides, lift 450 mm - Movable lifting roof in positions front (9x50) and rear (9x50), can be driven at increased height - Including tarpaulin extension and apron at rear - Roof can be cranked out 900 mm at front wall Accessories: - Extendable warning signs (removable at front and rear, with socket) incl. position lights up to loading width 4,000 mm - Storage for 4 warning signs on inside of front wall, top right and left - 1 aluminum ladder with holder 2,500 mm long on front wall - 2 rows of self-securing aluminum slats - Metal mudguards with splash flaps - 1 overnight parking plate and 1 ADR plate on rear wall - BEKAMAX central lubrication system with pump and grease class 2 for approx. 35 lubrication points - Electrohydraul

Stanje: novo, lastna masa: 8.490 kg, največja dovoljena obremenitev: 40.510 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.490 kg, Oprema: ABS, Chassis: Djdpjwu A Slefx Aqqskr - Robust welded steel frame structure with front frame drop and flat loading platform with rear bevel, approx. 500x100 mm - Gooseneck height 200 mm with beveled corners - Gooseneck end with bevel approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear bevel) - 2 kingpin positions with interchangeable 2" kingpin - Outer frame closed outwards as slotted rail for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Provisions for extendable deck wideners - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to end of vehicle - 1 pair wheel recesses in front of the axle with steel covers (covers with Körapur coating), approx. 400 mm deep, plus 1 pair wheel recesses between the 1st and 2nd axle with steel covers - Underride protection = extended end plate - Hydraulic drop-down supports at rear Floor: - 35 mm larch timber floor with aluminum omega profiles Axles, Steering, and Tyres: - BPW air suspension axles, each rated at 10 t axle load, bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device, total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired through EBS), fully automatic actuation with manual emergency actuation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring system Braking System: - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Pneumatic connection yellow/red Paintwork: - Steel shot blasting, spray galvanising of chassis and primer - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau Accessories: - Removable side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Steel fenders with Clear-Pass - Long license plate holder in end plate - 1 removable ECE plate at the rear - 11 pairs ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading platform - Without rear towing eyes - Extendable warning signs including 3 position lamps each, front at landing legs and rear in front of end plate, steplessly extendable up to 4,500 mm load width - 4 insertable sockets for warning signs in stake pockets on loading platform - 6 pairs stake pockets along sides for 100x50 mm stakes - 2 cross rows of stake pockets for 100x50 mm stakes on the gooseneck from outside frame to main frame (1 before and 1 after kingpin positions) - 3 cross rows of stake pockets for 100x50 mm stakes on loading platform from outer frame to main frame (1 in front section, 1 before 1st axle, 1 after 3rd axle) - 2 pairs steel plates on loading platform for container locks to accept 1x 20ft container - Rubber skirt mounted on underrun protection - Preparation (cable routing for NATO cable and hole pattern for subsequent mounting of NATO socket at front of end plate and bracket on vehicle) for optional retrofit of electrohydraulic power unit at right rear for potential operation of access ramps - Mechanical 24-ton stabiliser landing gear with single-sided operation and compensating shaft Optional: Trailer available with aluminum folding ramps.

Stanje: novo, lastna masa: 12.900 kg, največja dovoljena obremenitev: 34.100 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 350 mm, vzmetenje: drugo, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 12.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm in length - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2, and 6x4 Loading Platform: - Low-bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm in length - Low-bed with fixed hardwood flooring, approx. 40 mm thick, with mechanical locking device Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear Dksdpfx Ajhlz R Sjqqor - 2 pairs of lashing rings, foldable to the outside - 1 pair of lashing rings recessed in the trough - 2 pairs of stake pockets for insertable stakes 100 x 50 mm in the external frame Pendulum Axle and Tyres: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and safety locking pins for securing in raised position - Axles painted with two layers of single-colour 2K paint in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Preparation for the installation of bolt-on container locators for 1 x 20ft or 1 x 40ft container on the outer girders - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel - Yellow-red air couplers on the galvanized front connection bar - 4 wheel chocks - Remote steering from front and rear, operable via wired remote control with push buttons, with single-track alignment control - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - Electro-hydraulic power unit - White reflective tape in accordance with EU regulations on sides, extension, and rear - European reflective plates (red-yellow) on the rear of the trailer - One bracket on each side of gooseneck and rear plate for warning panels, including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on outer beam for mounting screw-on RUD Rings VLBG-4 - Detachable ALU side boards and rear board on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized insertable stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area covered with removable cover - 5 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading area - Folding extensions, approx. 230 mm per side - 2 pairs of bolted RUD Rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the mounting hooks of the low-bed - Anti-skid sand layer painted on loading surface - 80 km/h speed stickers at rear and both sides - Spoon boom trough at rear chassis closed at rear with plug-in plate - Four extendable warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for rear axle steering in addition to cable remote, with indicator lights on receiver for alignment control - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load pressure gauge for determining axle loads - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot blasted, then all defined visible areas metallized and finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot galvanizing

Stanje: rabljeno, skupna masa: 120.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2016, Števila vozila: W09TS6012G0M49121 TELESKOPSKO podaljšanje za 7.000 mm - ŠIRINA se lahko poveča do 3.200 mm hidravlično vzmetenje hidravlični pogon - vtičnica po standardu NATO največja obremenitev sedla: 24.000 kg - obremenitev osi: 2+6 x 12.000 kg skupna masa: 96.000 kg - (z reduktorjem na 2 osi 120.000 kg) lastna teža: 20.300 - 22.370 kg (z reduktorjem na 2 osi 25.280 - 27.350 kg) veljavnost nemške tehnične preglede (DE HU) globina nakladalne platforme (Schwandenhals): pribl. 3.750 mm višina sedla: 1.300 - 1.400 mm = kraljevi čep (Königszapfen) 3,5 palca nizka platforma: dolžina: 10.350 mm (od tega 350 mm nagnjena) - širina: 2.550 mm - višina nakladalne površine: pribl. 880 mm z reduktorjem na 2 osi je dolžina za 3.300 mm večja ŠIRINA se lahko poveča na 3.200 mm Dedpfx Aqozq Ixasqokr gumirane, hidravlično nastavljive po višini in v stranski smeri, razdeljene rampe - 2.300 + 2.300 = 4.600 mm, širina 830 mm tehnična obremenitev osi: 6 + 2 x 12.000 kg osnove Gigant z bobnovimi zavorami - HIDRAVLIČNO VZMETENJE os 1, 2, 3, 4 - možnost DVIGANJA 2+6 x VOLANJA OS, hidravlično prisilno usmerjanje radijsko upravljanje centralni sistem za mazanje pnevmatike: 245/70 R 17,5 Pridržujemo si pravico do sprememb, prodaje medtem in napak. Opis služi splošni identifikaciji vozila in ne predstavlja garancije v smislu kupoprodajne pogodbe. Odločilna je opis v kupoprodajni pogodbi. Naša ponudba je na splošno brez novega tehničnega pregleda (TÜV). Če je nov tehnični pregled zaželen, vam z veseljem pripravimo ponudbo naših partnerskih servisov! Vozilo je lahko opremljeno z oglaševalnimi nalepkami in/ali oznakami. Veljajo naši splošni pogoji dostave in plačila.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.500 kg, največja dovoljena obremenitev: 18.700 kg, skupna masa: 26.200 kg, konfiguracija osi: 2 osi, skupna dolžina: 12.400 mm, skupna širina: 2.550 mm, velikost pnevmatike: 205 / 65 r 17,5, Further Information Chassis: Semitrailer Logistics Dkodpfxji Ri Hre Aqqor Fine-grained steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin, rear bevel approx. 1920 mm, continuous ramp hanging bar at the rear and at the front of the gooseneck, ground rollers at the rear, lowered deck (deep bed) after the step-down up to the axle assembly. Drawing release from the customer required upon order! Pair of lashing mushroom pins recessed on top and side in the outer frame, each rated for 10t Pair of lashing eyes recessed in the outer frame on the gooseneck, each rated for 5t 24t two-speed landing gear, single-sided operation, with straight lower part, without compensating plate Foldable rear support, mounted externally Wheel chocks with holder Side underrun protection – aluminum Rear underrun protection – steel, for EU, where technically possible Quarter-shell mudguards With anti-spray mudflaps according to EU regulations 1 pair of wheel recesses recessed after the gooseneck in the deep-bed lane area, sloped for easier entry. Bottom length approx. 1840 mm, recess depth approx. 200 mm. Second pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than the wheel recess. Detailed technical inspection required upon order. Removable wheel recess covers from the deep bed with hardwood inlays, at rear bevel with hardwood inlays. Electric cable winch, 24 volts, pulling force 5500 kg, mounted in the gooseneck step-down, does not reach into load area, operated by remote control, cable length 35 m × approx. 10 mm, with roller fairlead and detachable guide roller at the rear bevel. Axles & Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto-reset function Wheels and Tires 205/65 R 17.5 tires with 129/127K (132/132G) rating for 8t tire load capacity at max. 90 km/h, preference of manufacturer Steel twin wheels, factory silver Brake System 2-line compressed air brake system Spring-actuated parking brake 2 interchangeable coupling heads at front, without connecting line EBS by Haldex, electronic braking system with EBS socket at front, without connecting cable (brake calculation sent to customer for approval, 15.07.2021) Attention: The trailer may only be towed by tractor units that ensure ABS effectiveness! Axle load detection via EBS CAN bus signal, display in the driver’s cab possible (truck must be properly prepared, not installed, not a calibrated scale) Electrics 24 volts multi-chamber rear lights, lateral yellow LED lights 2 white position lights at front 2 white/red outline marker lights at rear 2 × 7-pin and 1 × 15-pin interchangeable sockets at front, without connecting cable Floor Gooseneck with steel/checker plate covering 30 mm phenolic resin plywood floor, in deep bed between main rails In the drive lane area with serrated grating, in wheel recesses with steel/checker plate covering Ramps Pair of aluminum ramps, 3,200 mm long, load capacity 12,000 kg per pair Pair of steel ramps for entry into deep bed Pair of steel ramps for crossing gooseneck Sidewalls Approval / Signage Registration country: Germany With DEKRA inspection and certificate (according to §13 EC-FGV) Prepared for single-line license plate holder Contour marking with reflective strips as per ECE R 048, yellow at sides and red at rear Warning plate as per ECE-70 Paintwork Frame painted RAL 9018 Papyrus White Support feet coated black Attention: Archive ima

Stanje: rabljeno, lastna masa: 6.560 kg, največja dovoljena obremenitev: 18.440 kg, skupna masa: 25.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2017, dolžina tovornega prostora: 13.700 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, medosna razdalja: 7.500 mm, barva: modra, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, dodatne luči, zavorni sistem na stisnjen zrak, * German semi-trailer * Very good visual condition, see photos * 2-axle low loader, Jumbo TO 152 DE * Loading platform: length 13,700 mm x width 2,540 mm * Loading height approx. 850 mm * Stake pockets * Multilock system * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminium loading ramps 3,000 x 400 mm, laterally adjustable * ROR axles * Air suspension * Haacon spindle supports * ABS + EBS * Work lights * Spare wheel * Toolbox * Brake drums Dkedpfx Aexu Nnwsqqsr * Wheelbase: 7,500 mm + 1,250 mm * Permissible gross weight up to 27,200 kg * Unladen weight 6,560 kg * Payload up to 20,640 kg If a new TÜV inspection is required, we are happy to provide an offer through our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV. Further trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to ensure there are no misunderstandings regarding condition and suitability. Inspection and viewing are possible at any time by prior appointment and are expressly desired. All information is provided without guarantee. We accept no liability for errors or inaccuracies in the offer. The buyer is obliged to independently inspect the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Stanje: rabljeno, lastna masa: 6.290 kg, največja dovoljena obremenitev: 31.710 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2007, vzmetenje: zrak, medosna razdalja: 1.810 mm, barva: siv, prevoženi kilometri: 100 km, vrsta prenosa: mehanski, Oprema: ABS, Lastna teža: 6290 kg, dovoljena skupna masa: 38000 kg, zračna vzmet, elektronski zavorni sistem EBS, BPW osi, hidravlično krmiljenje in prisilno usmerjanje, odprta platforma, pritrdilne točke za kontejnerje. Prvi lastnik, prodaja v komisijski obliki, ponudba ni zavezujoča, pridan je opozorilo o morebitnih napakah in možnosti predčasne prodaje. Slika je lahko simbolična in ne nujno ustreza ponudbi. Dkedpfxjzr R Aqs Aqqjr

Stanje: rabljeno, največja dovoljena obremenitev: 26.000 kg, skupna masa: 36.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2020, naslednji pregled (TÜV): 04/2027, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.550 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 2.450 mm, Leto izdelave: 2020, Oprema: ABS, Meusburger MPG-2 Jumbo-nizkopodvozna prikolica | 2 x hidravlično prisilno usmerjena os | Višina tovornega prostora 320 mm | ZSA VIN: 0M49970 PODVOZJE / KOMPONENTE * 2 osi * 2 x BPW Eco Plus * Obe osi hidravlično prisilno usmerjeni * Zračna vzmet * Centralni sistem mazanja * Ročna črpalka za upravljanje * Bobnaste zavore * ABS Dkjdpfezriulsx Aqqer * Zavorni sistem EBS * 2-vodna priključna povezava za stisnjeni zrak * Električna priključna povezava ABS * 15-polna električna priključna povezava * Razdalja med osmi: 1.310 mm NADGRADNJA * Jumbo-nizkopodvozna prikolica * Višina sedla: pribl. 1.160 mm * Zgornja platforma: pribl. 3.775 mm * Nizka platforma: pribl. 7.100 mm * Višina tovornega prostora na nizki platformi: pribl. 320 mm * Zadnja platforma: pribl. 2.670 mm PNEVMATIKE * Pnevmatike: 245/70 R17.5 143/141 J * Os 1: Preostala globina profila pribl. 60 % / 60 % * Os 2: Preostala globina profila pribl. 60 % / 60 % TEŽE * Dovoljena skupna masa: 36.000 kg * Tehnično dovoljena skupna masa: 38.000 kg * Prazna teža: 10.000 kg * Nosilnost: 26.000 kg OSTALO * Barva: Modra * Letnik: 2020 * Prva registracija: 15.04.2020 * Tehnični pregled: 04/2027 * Glavni pregled: 10/2026 Po dogovoru je možen nov tehnični pregled/glavni pregled, kot tudi sprememba dovoljene mase. Tudi po nakupu vam nudimo podporo: pomagamo vam pri pridobitvi izvoznih ali začasnih registrskih tablic. Organiziramo tudi prevoz vašega vozila znotraj Nemčije. Obrnite se na nas – z veseljem vam pomagamo! Govorimo nemško, angleško in rusko. Vse informacije so podane brez jamstva. Pridržujemo si pravico do sprememb, napak, tiskarskih in slovničnih napak ter do prodaje predhodno. O nas: Leible Nutzfahrzeuge je družinsko podjetje s sedežem v Kelhu ob Renu. Že vrsto let smo sinonim za izkušnje, zanesljivost in strokovnost na področju obdelave in prodaje gospodarskih vozil. Naša prednost je nakup in prodaja novih in rabljenih gospodarskih vozil. Na našem približno 11.000 m² velikem posestvu najdete širok izbor vozil za različne namene. Pri nas ni pomembno le vozilo, ampak tudi storitev, ki jo nudimo. Poštenost, resnost in zadovoljstvo strank so za nas na prvem mestu. Zato vas spremljamo osebno in zanesljivo – od prvega stika do predaje vašega vozila. Prepričajte se sami. Veselimo se vaše povpraševanja! Naše storitve za vas: Nakladanje vozila Pomagamo vam pri nakladanju kupljenih vozil. Posebni prevozi Podpiramo vas pri organizaciji posebnih prevozov. Izvozne in začasne registrske tablice Pomagamo vam pri pridobitvi izvoznih ali začasnih registrskih tablic. Carski formalnosti Tudi pri carinskih zadevah vam nudimo podporo. Prevoz vozila Po želji organiziramo prevoz vašega vozila znotraj Nemčije.

Stanje: rabljeno, največja dovoljena obremenitev: 26.000 kg, skupna masa: 36.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2020, naslednji pregled (TÜV): 04/2027, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.550 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 2.450 mm, Leto izdelave: 2020, Oprema: ABS, Meusburger MPG-2 Jumbo-nizkoposredni prikolica | 2 x hidravlično vodenje | Višina nakladalne površine 320 mm | ZSA Šasija: 0M49970 PODVOZJE / KOMPONENTE * 2 osi * 2 x BPW Eco Plus * Obe osi s hidravličnim vodenjem * Zračna vzmetitev * Centralni sistem mazanja * Ročna črpalka za vodenje * Bobnaste zavore * ABS * Zavorna sistem EBS * 2-vodna priključna povezava za zračni tlak * Električna povezava ABS * 15-polna električna povezava Dodpfxjzrit Uj Aqqjkr * Razdalja med osmi: 1.310 mm NADGRADNJA * Jumbo-nizkoposredni prikolica * Višina sedla: cca 1.160 mm * Zgornja ploščad: cca 3.775 mm * Nizka ploščad: cca 7.100 mm * Višina nakladalne površine na nizki ploščadi: cca 320 mm * Zadnja ploščad: cca 2.670 mm GUME * Gume: 245/70 R17.5 143/141 J * Os 1: Preostala globina profila cca 60 % / 60 % * Os 2: Preostala globina profila cca 60 % / 60 % TEŽE * Dovoljena skupna masa: 36.000 kg * Tehnično dovoljena skupna masa: 38.000 kg * Prazna teža: 10.000 kg * Nosilnost: 26.000 kg OSTALO * Barva: Modra * Letnik: 2020 * Prva registracija: 15.04.2020 * Tehnični pregled: 04/2027 * Redni tehnični pregled: 10/2026 Novi tehnični pregled/redni tehnični pregled, kot tudi prilagoditev teže (zmanjšanje ali povečanje), je mogoča po dogovoru.----Tudi po nakupu vam ne pustimo samega: Pomagamo vam pri pridobivanju izvoznih ali začasnih registrskih tablic. Omogočamo tudi prevoz vašega vozila po Nemčiji. Obrnite se na nas – z veseljem vam pomagamo! Govorimo nemško, angleško in rusko. Vse informacije so podane brez jamstva. Pridržujemo si pravico do sprememb, napak, tiskarskih in slovničnih napak ter do predčasne prodaje.----O nas: Leible Nutzfahrzeuge je družinsko podjetje s sedežem v Kehlu ob reki Renu. Že vrsto let se ponašamo z izkušnjami, zanesljivostjo in strokovnostjo na področju priprave in prodaje gospodarskih vozil. Naša moč je v nakupu in prodaji novih in rabljenih gospodarskih vozil. Na našem približno 11.000 m² velikem posestvu boste našli široko ponudbo vozil za različne namene. Pri nas ni pomembno samo vozilo, ampak tudi storitev, ki jo nudimo. Poštenost, resnost in zadovoljstvo strank so naša prioriteta. Zato vas spremljamo osebno in zanesljivo – od prvega stika do izročitve vašega vozila. Prepričajte se sami. Veselimo se vaše ponudbe!----Naša storitev za vas: Nakladanje vozila Pomagamo vam pri nakladanju kupljenih vozil. Posebni transporti Pomagamo vam pri organizaciji posebnih transportov. Izvozne in začasne registrske tablice Pomagamo vam pri pridobivanju izvoznih ali začasnih registrskih tablic. Carinski postopki Podpiramo vas tudi pri carinskih zadevah. Prevoz vozila Po želji organiziramo prevoz vašega vozila po Nemčiji.

Stanje: rabljeno, največja dovoljena obremenitev: 26.040 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 12/2010, Leto izdelave: 2010, Oprema: ABS, Semi-trailer Meusburger MPS-2 with steered axles, Palfinger PK 26002 crane, remote control, 3 extensions: 4m 5700kg, 10m 2250kg. Tractor unit: MAN TGS 26.440 6X2 Euro 5 EEV, retarder, dual-circuit hydraulics. Condition: minor rust spots, otherwise good; technically very good. Dedsrbf Uhspfx Aqqokr Tyres: 80-90%

Stanje: rabljeno, največja dovoljena obremenitev: 23.340 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2002, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.520 mm, skupna širina: 2.540 mm, skupna višina: 2.300 mm, Oprema: ABS, Nooteboom nizkoposteljna prikolica + labodji vrat in 3 krmilne osi Tip: EURO5403 Nosilnost: 23.340 kg Zavore: bobnaste + z odstranljivim labodjim vratom + Vse osi krmiljene z daljinskim upravljanjem + Daljinski upravljalnik Dkedey Rvuxepfx Aqqor Nakladalna površina – platforma: 5230 mm Višina od tal: 610 mm Z veseljem vam pomagamo tudi na področju financiranja/leasinga z našimi partnerji. Vse informacije brez garancije. Pridržujemo si pravico do sprememb in vmesne prodaje.

Stanje: rabljeno, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, Za vsako rabljeno polpriklopno vozilo prejmete aktualno in popolno poročilo o pregledu ter delovanju. Podvozje: -Stabilna varjena jeklena konstrukcija okvirja z dvignjenim sprednjim delom in ravno nakladalno površino z zadnjim poševnim zaključkom približno 500x100 mm -Vrat okvirja višine 200 mm z zaobljenimi vogali -Poševni zaključek "grbine" (Schwanenhals) približno 500 x 100 mm (dvižni rebrasti profili na zunanjem okvirju za zadnjim poševnim delom) -2 mesti za king pin z zamenljivim 2'' king pinom -Zunanji okvir zaprt navzven z luknjami za privezovanje z napenjalnimi trakovi (pritrditev s verigami ni možna) -Ojačana izvedba okvirja / točkovna obremenitev v težišču -Priprava za izvlečne razširitve v nakladalni površini -Z bagrskim izrezom (brez pokrova), globina približno 220 mm, širina približno 600 mm, začne se za 2. osjo in poteka do zadka vozila -1 par blatniških izrezov pred osjo z jeklenimi pokrovi (pokrovi prevlečeni s premazi Körapur), globina približno 400 mm, ter še 1 par med 1. in 2. osjo z jeklenimi pokrovi -Zaščita pred podvozjem = podaljšana končna plošča -Podporne noge zadaj Rampi: -Dvodelne nakladalne rampe posebne izvedbe z mehanskim podaljšanjem -Dolžina približno 2.850 mm plus 1.850 mm, z hidravličnim dvigalom (samo v kombinaciji z elektrohidravličnim agregatom) -Širina približno 800 mm -Lesena površina -Vključene dvižne rebraste plošče na nakladalnih rampah -V transportnem položaju z možnostjo pritrditve z napenjalnimi trakovi -Upravljanje prek ročice, nameščene zadaj desno v smeri vožnje -Stransko hidravlično pomične Tla: -35 mm tla iz macesnovega lesa z aluminijastimi Omega profili Podporne dvigala: -Mehanske podporne dvigala 24 t s stranskim upravljanjem in izravnavo potiska Osovine, krmiljenje, pnevmatike: -BPW zračno vzmetene osi, vsaka 10 t dovoljene nosilnosti, premer zračnih mehov 360 mm Dkodpfxszdzrts Aqqjr -Zavore z Z-kamnom 300/200 mm, obloge brez azbesta -Avtomatski napenjalec zavornih palic -Dvigovanje in spuščanje s skupnim hodom približno 200 mm -2. položaj za vožnjo z dodatkom krogličnega ventila +50 mm -1. os dvižna os (preko EBS sistema), avtomatsko potrjevanje s mehanskim ročnim upravljanjem na priklopniku -3. os z obračalno osjo z električnim in mehanskim zaklepom -12 jeklenih platišč, 10 lukenj, z natančno namestitvijo na sredino -12 pnevmatik 245/70 R 17,5 143/141J, brez zračnic -Vključno s sistemom za nadzor tlaka v pnevmatikah Dodatna oprema: -Na grbi (Schwanenhals) snemljive bočne in zadnje stranice višine približno 400 mm -Nosilec za rezervno kolo -Bočna aluminijasta zaščita pred udarci -4 podložni zagozdi s pritrditvijo -Podaljšani nosilec za registrsko tablico na končni plošči -1 ECE tablica zadaj, snemljiva -11 parov ZK modulov 10 t ob strani: -2x na grbi -9x na nakladalni površini -Izvlečne opozorilne table, vključno s po 3 pozicijskimi lučmi, spredaj na podpornikih za prikolico in zadaj pred končno ploščo, brezstopenjsko izvlečne do nakladalne širine 4.500 mm -4 nosilci za opozorilne table, vstavljivi v žepe na nakladalni površini -6 parov bočnih žepov za stebre 100x50 mm -2 prečni žepi za stebre 100x50 mm na grbi (zunanjega okvirja do glavnega okvirja; 1x pred in 1x za položaj king pina) -3 prečni žepi za stebre 100x50 mm na nakladalni površini (1x spredaj, 1x pred 1. osjo, 1x za 3. osjo) -2 para jeklenih plošč na nakladalni površini za priklop kontejnerjev 1x 20ft -Gumijasta zavesa montirana na zaščito pred podvozjem

Stanje: rabljeno, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, For every used semi-trailer, you receive a current and complete inspection and functional report. Chassis: - Robust steel frame welded construction with front cranked frame and flat loading area, inclined at the rear approx. 500x100 mm - Frame neck 200 mm with chamfered corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the rear sloped area) - 2 kingpin settings with replaceable 2" kingpin - Outer frame closed outward as perforated external frame for lashing with tension straps (chains not possible) - Reinforced frame design / point load at the center of gravity - Provisions for extendable load floor widenings - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of the axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, and 1 pair of wheel recesses between 1st and 2nd axle steel covers - Underrun protection = extended end plate - Drop-down supports at rear Ramps: - 2-piece special-design loading ramps, mechanically extendable - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lift (only in conjunction with electrohydraulic unit) - Width approx. 800 mm - Wood surface - Incl. traction ribs on loading ramps - Can be secured in driving position with tension straps - Actuated via control lever mounted to the right at rear in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch wooden floor with aluminum omega profiles Landing Gears: - Mechanical 24t landing gears with one-side operation and push rod compensation Axles, Steering and Tyres: - BPW air suspension axles, each 10t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lower mechanism with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), fully automatic control with mechanical emergency operation via button on the trailer - 3rd axle self-steering trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Plug-in side and rear walls approx. 400 mm high on gooseneck - Spare wheel holder - Lateral aluminum side underrun protection - 4 wheel chocks with holders - Long license plate holder in end plate - 1 ECE-board insertable at the rear - 11 pairs of ZK modules 10t laterally: - 2x on the gooseneck - 9x on the loading area - Extendable warning signs incl. 3 position lights each, at front on landing gears and rear before end plate, infinitely extendable up to loading width of 4,500 mm Dkedpjzabnbefx Aqqjr - 4 fittings for warning signs, plug-in to pockets on loading area - 6 pairs of stake pockets at sides for stakes 100x50 mm - 2 rows of crosswise stake pockets for stakes 100x50 mm on gooseneck from outer frame inwards up to main frame (1x before and 1x after kingpin positions) - 3 rows of crosswise stake pockets for stakes 100x50 mm on load area from outer frame inwards up to main frame (1x front, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate one 20ft container - Rubber skirt mounted on underrun protection

Stanje: novo, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame lowering and level loading platform, rear chamfer approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Chamfered end swan neck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear chamfer) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed to the outside as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame before and after extension with 80x80 mm step - Reinforced frame design / point load focused in the retracted state - Without extendable loading platform widenings, however, prepared for retrofitting (=guiding tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle, extending to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers coated with Körapur), depth approx. 400 mm - Underrun protection = extended end plate - Drop support legs at the rear Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), confirmation fully automatic with manual emergency activation via button on semi-trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centered by offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on swan neck, approx. 400 mm high - Spare wheel holder - Side aluminium underrun protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 removable ECE sign at the rear - 11 pairs ZK modules 10t, on the side: - 2x on the swan neck - 2x on the loading platform in front of the extension - 7x after the extension - Extendable warning signs including 3 position lamps each, front at landing gear and rear before end plate, steplessly extendable up to loading width 4,500 mm - 4 plug-in holders for warning signs in stake pockets on loading platform - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the swan neck from the outer frame to the main frame (1x in front of and 1x after the kingpin positions) Dkodpfx Aqexnnk Djqer - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on the loading platform from outer frame to main frame (1x in front of the extension, 1x after the extension and 1x after the 3rd axle) - 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection Optional: The trailer is available with ramps.

Stanje: novo, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, obratovalna teža: 10.100 kg, Oprema: ABS, Chassis: - Sturdy welded steel frame construction with front frame cranking and flat loading platform, rear ramped section approx. 500x100 mm - Gooseneck 200 mm with beveled corners - Sloped gooseneck end approx. 500x100 mm (traction ribs on outer frame behind rear inclination) - 2 kingpin positions with replaceable 2" kingpin - Outer frame closed on the outside as perforated frame for lashing with tension belts (chains not permitted) - Reinforced frame design / point load at the center of gravity - Prepared for extendable load platform widenings - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle - 1 pair wheel recesses in front of axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair between 1st and 2nd axle, steel covers - Underrun protection = extended end plate - Drop-down supports at rear Ramps: - 2-piece drive-up ramps, custom design, with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting mechanism (only in connection with electrohydraulic unit) - Width approx. 800 mm - Wood topping - Incl. traction ribs on ramps - Can be secured for travel with tension belts - Operated by manual lever mounted rear right in direction of travel - Hydraulically laterally shiftable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24 t landing gears, operated from one side with load equalization Axles, Steering, and Tires: - BPW air suspension axles, each rated at 10 t axle load, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lower device, total stroke approx. 200 mm - 2nd drive position via ball valve +50 mm - 1st axle as lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on trailer - 3rd axle as friction steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-fitted offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Plug-in side walls and rear wall on gooseneck approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 wheel chocks - Long license plate holder in end plate - 1 detachable ECE sign at rear - 11 pairs ZK modules 10t on the sides: - 2x on the gooseneck - 9x on the load platform Dkodpswviwkefx Aqqor - Steel mudguards with clear pass - Extendable warning panels incl. 3 position lamps each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 plug-in holders for warning panels in stake pockets on loading surface - 6 pairs of lateral stake pockets for 100x50 mm stakes - 2 rows of crosswise stake pockets for 100x50 mm stakes on the gooseneck from outer frame towards main frame (1x before and 1x after kingpin positions) - 3 rows of crosswise stake pockets for 100x50 mm stakes on loading platform from outer frame towards main frame (1x in front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in load platform for container locks to receive 1x 20ft container - Rubber apron mounted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Nova grey

Stanje: rabljeno, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Chassis: -Robust steel frame welded construction with front frame drop and flat cargo bed with rear taper approx. 500x100 mm -Frame neck 200 mm with beveled front corners -Tapered rear end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in rear taper area) -2 king pin positions with replaceable 2” king pin -Outer frame closed to the outside as hole profile outer frame -Cargo bed with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm -Frame before and after extension with 80x80 mm step -Reinforced frame design / point load support in retracted position at center of gravity -Without extendable widening sections in the cargo bed, but prepared for retrofitting (= guide tubes welded into the frame) -With excavator recess (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to rear end of vehicle -1 pair of wheel recesses between 1st and 2nd axles with steel covers (covers with Körapur coating), depth approx. 400 mm -Underrun protection = extended rear plate -Drop support legs at rear Floor: -35 mm larch wood floor with aluminum omega profiles Dksdsywv Ixepfx Aqqer Axles, Steering and Tires: -BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm -S-cam brakes 300/200 mm, asbestos-free brake pads -Automatic slack adjuster -Lift-and-lower system with total lift approx. 200 mm -2nd ride height via ball valve +50mm -1st axle is a lift axle (wired via EBS), confirmation fully automatic with mechanical emergency activation via push button on the trailer -3rd axle is a friction-steered trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, centrally offset -12 tires 245/70 R 17.5 143/141J, tubeless -Including tire pressure monitoring Accessories: -Removable drop sides and rear wall on the gooseneck, approx. 400 mm high -Spare wheel holder -Lateral aluminum side underrun protection -4 wheel chocks with bracket -Elongated license plate holder in the rear plate -1 plug-in ECE sign at rear -11 pairs of 10t lashing modules at the sides: 2x on gooseneck 2x on cargo bed in front of the extension 7x after extension -Without rear towing eyes -Extendable warning boards incl. 3 position lights each, front at landing gear and rear in front of rear plate, steplessly extendable to a load width of 4,500 mm -4 holders for warning boards, insertable in stake pockets on the cargo bed -6 pairs of side stake pockets for plug-in stakes 100x50 mm -2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) -3 rows of transverse stake pockets for plug-in stakes 100x50 mm on cargo bed from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) -2 pairs of steel plates in the cargo bed for container locks to accommodate 1x 20ft container -Rubber apron mounted on underrun protection -Prepared (= cable routing for NATO cable and hole pattern for retrofit mounting of NATO socket in front section of rear plate as well as bracket on vehicle) for retrofitting electrohydraulic power pack on right rear in driving direction for potential operation of loading ramps Optional: the trailer is available with aluminum loading ramps

Stanje: novo, skupna masa: 20.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.200 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, z indikatorjem obremenitve osi, dolžina nakladalne površine 8.200 mm, nakladalna višina obremenjena pribl. 900 mm, 20 pritrdilnih ušes po 10 t, 14 žepov za kole v zunanjem okvirju, nakladalne rampe (pribl. 3.000 x 750 mm), plezalna letvica na zunanji strani pri rampi in zadnjem nagibu, rampe nastavljive po širini, vzmetni dvižnik za enodelne rampe, lesen pod debeline 70 mm, zabo za shranjevanje z verižnim ali napenjalnim trakom, označevalni trak v skladu s predpisi, parkirna zavora z vzmetnim akumulatorjem, vozilo popolnoma vroče pocinkano, vključno z indikatorji obremenitve osi; dodatki za doplačilo: opozorilne table + osvetlitev + rotacijska luč = cena: 800 €, razširitev na 3 m = cena: 1.100 €, hidravlične enodelne rampe 500 €, hidravlični pomik ramp? = cena: 1.000 €, izrez za izkopno roko = cena: 1.000 €. Na zalogi tudi z dolžino nakladalne površine 9,20 m. -- Pridržujemo si pravico do napak in sprememb, vzorčne slike -- Več podatkov na:!, More Details: ! Dodpfjztd S Isx Aqqskr

Stanje: rabljeno, lastna masa: 5.300 kg, največja dovoljena obremenitev: 12.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2010, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.900 mm, prostornina tovornega prostora: 52 m³, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/141J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/141J, velikost zadnje pnevmatike: 235/75R17,5 ---/141J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Lashing eyes, -- Typographical errors, mistakes and changes excepted, sample images --, More data at: !, More details: ! Dkjdpfx Aqezr Unkjqjr

Stanje: rabljeno, lastna masa: 4.300 kg, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2019, dolžina tovornega prostora: 7.200 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R19,5 160J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 445/45 R19,5 160J, velikost zadnje pnevmatike: 445/45 R19,5 160J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Printing errors, mistakes and changes excepted, sample images shown. For more details, visit: ! Dsdpfxezr Saqe Aqqokr

Stanje: rabljeno, lastna masa: 5.300 kg, največja dovoljena obremenitev: 12.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2010, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.900 mm, prostornina tovornega prostora: 52 m³, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/141J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/141J, velikost zadnje pnevmatike: 235/75R17,5 ---/141J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Lashing eyes, -- Typographical errors, mistakes and changes excepted, sample images --, More data at: !, More details: ! Dkedpfx Aqszrqk Ujqer

Stanje: novo, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Višina nakladanja cca 940 mm, 20 pritrdilnih ušes po 6 t, 20 pritrdilnih zank po 6 t, 18 pritrdilnih lukenj, 7 žepov za kole v sredini, 14 žepov za kole v zunanjem okvirju, 2 para zabojniških zapahov, doplačilo za sprednjo steno cca 1.600 mm visoko, snemljivo Cena: 1.500 €, doplačilo za izvlečno vlečno oje Cena: 1.500 €, doplačilo za 4 opozorilne table z razsvetljavo Cena: 800 €. Na voljo tudi v dolžini nakladalne površine 7.600 mm! -- Pridržujemo si pravico do napak v tisku, sprememb in napak, vzorčne slike --, Več podatkov na zahtevo!, Več podrobnosti na zahtevo! Dsdpfxezrqgce Aqqokr

Stanje: novo, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Loading height approx. 980 mm, 20 lashing rings, each 6 t, 20 lashing brackets, each 6 t, 18 lashing holes, 7 central stake pockets, 14 stake pockets in the outer frame, 2 pairs of container locks, surcharge for front wall approx. 1,600 mm high, detachable, price: €1,500, surcharge for extendable drawbar, price: €1,500, surcharge for 4 warning signs with lighting, price: €800. Also available with 8,600 mm loading platform length! Errors, misprints, and changes excepted. Sample images. More data at: ! More details: ! Dkedszn Ny Tjpfx Aqqjr

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 45.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2026, naslednji pregled (TÜV): 06/2027, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 300 mm, skupna širina: 2.550 mm, skupna višina: 300 mm, Leto izdelave: 2026, Oprema: ABS, DOLL tera 2-osni nizkotonski priklopnik z nihajnimi osmi Novo vozilo, prva registracija 30.06.2026 Lastna teža 13.950 kg Dovoljena skupna masa (tehnično) 45.000 kg Dolžina podvoza 3.070 mm Višina sedla 1.200 do 1.280 mm Polmer obračanja 2.350 mm Dolžina nizkotonske platforme 6.800 mm Dolžina teleskopske platforme 5.700 mm Dolžina zadnjega podvoza 2.700 mm Dkodpfx Aezmqmxsqqor Širina jame za roko bagra 700 mm Globina jame za roko bagra 550 mm Višina tovorne površine nizkotonske platforme 300 mm Višina tovorne površine nad podvojem 955 mm Širina priklopnika 2.550 mm Hidravlično vzmetenje -70 / + 530 mm Tehnična maksimalna obremenitev sedla 21.000 kg Obremenitev osi 24.000 kg Podvozek z zunanjo glavno konstrukcijo Barvanje priklopnika v 3 plasteh, vključno s pocinkanjem Sistem DOLL Tronic CAN-Bus Talna obloga nizkotonske platforme: 45 mm deske iz smreke med vzdolžnimi nosilci 24-voltna električna hidravlika Upravljanje funkcij priklopnika z DOLL tipkovnico na podvoju DODATNO KRMILJENJE z brezžičnim upravljanjem EEG elektronsko uravnavanje za vožnjo naravnost LaSi na nizkotonski platformi: 7 parov vrtljivih pritrdilnih točk, sila pritrditve 13.400 daN 5 parov žepov za vzdolžne nosilce na zunanji konstrukciji 3 pari navojev M36 na zunanji strani za vijačenje pritrdilnih nosilcev Podvozek DOLL tera z nihajnimi osmi in hidravlično vzmetenimi osmi BPW Vse osi so hidravlično usmerjene s prisilnim gibom, maksimalni kot usmerjanja na zadnji osi 60° Vse točke za mazanje so priključene na centralni sistem za mazanje WABCO priklopni sistem EBS z ABS in RSS Zračni rezervoar iz aluminija BEKA-MAX centralni sistem za mazanje na prednjem in zadnjem delu Komplet za nadstandardno širino z zložljivimi podaljški tovorne površine 2 x 225 mm, paket opozorilnih tabel, ki se lahko izvleče na širino 3.200 mm Gume 8-krat 245/70 R 17,5 NAJEM je nova oblika NAKUPA, pri nas je tudi možnost NAJEMA s polnim servisom, takoj na voljo-----

Stanje: rabljeno, največja dovoljena obremenitev: 12.910 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2012, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 7.410 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 3.050 mm, prostornina tovornega prostora: 56 m³, Oprema: ABS, * 7024 – ID vozila za telefonske povpraševanja * ABS, EBS, osi SAF, zračna vzmet, dvigovanje in spuščanje, bobnaste zavore, dvojne pnevmatike, nastavljiva vlečna prikolica – ukrivljena, vlečna kljuka 40 mm * Drsno pokrivalo, pritrdilne letve za okvirje stekel na tovorno površino, pritrdilne zanke, opora za palete na levi in desni strani, valjasta prevleka zadaj, aluminijasta stranska stena 65 cm zadaj * Pnevmatike 1. os: 235/75R17,5 (6 / 8 / 7 / 9 mm) * Pnevmatike 2. os: 235/75R17,5 (4 / 5 / 4 / 4 mm) ----naš e-poštni naslov:     naša storitev za vas:       - priskrba začasnih ali carinskih registracijskih tablic       - prevoz / dostava po vsej EU       - carinski postopki za vozila, ki se izvažajo v tretjo državo Whatsapp za angleščino, nemščino, ruščino in druge jezike: Dkedpjyg Ukpjfx Aqqsr

Stanje: rabljeno, največja dovoljena obremenitev: 12.250 kg, skupna masa: 16.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2017, dolžina tovornega prostora: 6.950 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 730 mm, prostornina tovornega prostora: 12 m³, Oprema: ABS, * 9075 – ID vozila za telefonska povpraševanja * ABS, EBS, osi BPW, dvojne pnevmatike, bobnaste zavore, zračno vzmetenje za dvigovanje in spuščanje, ukrivljena vlečna prikolica, aluminijaste stranske stene, pritrdilne zanke, 4x letve za nosilce stekla na tovoru, škatla za orodje * Višina tovornega prostora: 0,95 m * Pnevmatike spredaj: 215/75R17,5 (7 / 7 / 8 / 7 mm) * Pnevmatike zadaj: 215/75R17,5 (7 / 7 / 7 / 8 mm) ----naš e-poštni naslov:     naša storitev za vas: Dkedpfx Ajw S Abysqqor       - ureditev začasnih ali carinskih registrskih tablic       - transport / dostava po vsej EU       - carinski postopki za vozila, namenjena tretjim državam Whatsapp za angleščino, nemščino, ruščino in druge jezike: