Platforma

Faymonville MAX Trailer 3-Achs-Plateau-Sattelaufl.

Stanje: novo, največja dovoljena obremenitev: 49.000 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable Loading Platform: - Loading platform, extendable design with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, checker-plate covering above the axles Two-Part Removable Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulic side-shift - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Itedpfxeh Etf Rs Ab Uer Axles and Tyres: - BPW axles, two fixed axles and two steering axles (self-steering), air suspended, with drum brakes, raise/lower function - Self-steering axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tool kit - Tyre size 235/75 R 17.5 Brake System: - Braking system according to EU regulations with EBS-E (4S3M) Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-tone topcoat using 2-component (2K) paint in Nova grey Electrical System: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S, and 15-pin sockets Included Accessories: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holders on the front wall - Mount at the rear section of the gooseneck for ALU approach ramps - Galvanized folding supports underneath the loading platform chamfer - One holder for warning beacon - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the side, red on extension and rear, according to EU regulations - Electro-hydraulic power unit - At the gooseneck and ramps (left/right) a holder each for warning signs including socket - Control valves for the ramps mounted on the right side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, two 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Galvanized, extendable platform wideners approx. 230 mm per side - Lift axle on the front axle with control system - 20 x 20 mm square climbing bars - BEKAMAX central lubrication system - Four warning signs extendable by approx. 400 mm eac

Stanje: rabljeno, največja dovoljena obremenitev: 23.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2013, naslednji pregled (TÜV): 01/2025, dolžina tovornega prostora: 19.100 mm, Oprema: ABS, Faymonville 3-Axle Multimax Low Loader F-S43-1AAF First registration: .23 Gross weight: 35,000 kg Technical permitted gross mass: 58,600 kg Unladen weight: 11,500 kg Payload: 23,500 kg SAF axles: 8,000 kg + 8,000 kg + 8,000 kg Max. capacity: 11,200 kg + 11,200 kg + 11,200 kg Kingpin load / fifth wheel load: 11,000 kg Length: 13,675 mm, extendable to 19,475 mm Width: 2,540 mm / Height: 3,270 mm Loading platform: 13,300 mm, extendable to 19,100 mm Wheelbase: 2,900 mm / 1,360 mm Tyres: 245/70R17.5 1st axle liftable / 3rd axle steerable TÜV valid until: Further information available upon request by email! No guarantee for the accuracy of information/errors excepted! Details provided online are non-binding descriptions and do not constitute warranted characteristics. The seller assumes no liability for errors, input mistakes and data transmission errors. Iedpfx Asu Ry T Rob Ujtr Subject to change without notice. Permanent purchase and sale as well as trade-in and rental of crane and lifting vehicles as well as construction and heavy-duty vehicles.

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Load platform: - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit - Loose widening planks in reinforced steel U-frame - Radio and cable remote control Iedpfjk Af Svox Ab Ujtr - 4 warning signs, approx. 423 x 423 mm

Stanje: novo, konfiguracija osi: 1 os, skupna širina: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, Met de vrachtwagen-trekkertransporter kunt u uw vrachtwagen-trekker snel vervoeren als u onderweg problemen heeft. Deze aanhanger kan zelfs de grootste cabine van elk merk transporteren. Twee lieren aan boord voor het op- en afslepen van de aanhanger. 24 volt, 400 ampère – elke vrachtwagen kan met deze aanhanger rijden, mits voorzien van een NATO-aansluiting. Voor bestellen kunt u Mannes bellen. Itjdpfx Absm Duc Uo Usr Twente Trucks bedient de wereld.

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels Isdpfxehlz S Ns Ab Ujtr • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: rabljeno, prevoženi kilometri: 184.284 km, moč: 382 kW (519,37 KM), prva registracija: 05/2018, vrsta goriva: dizel, velikost pnevmatike: 385/65r22.5, konfiguracija osi: 6x2, gorivo: dizel, zavore: retarder, barva: rdeča, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, Leto izdelave: 2018, Oprema: ABS, klimatska naprava, nadzor oprijema, parkirni grelec, retarder, spojka prikolice, tempomat, zapora diferenciala, žerjav, = Further Options and Accessories = - Adaptive Cruise Control - AdBlue System - Differential Lock - Double Glazing - Electric Windows - Remote Central Locking - Refrigerator - LED Headlights - Lift Axle - Air Suspension - Towing Jaw - Engine Brake - PTO (Power Take-Off) - Radio - Sun Visor - Spotlights - Lane Departure Warning System - Auxiliary Heater (Parking Heater) = Notes = Scania R520 V8 Full air suspension. Retarder. Engine PTO. Crane: Palfinger T.E140Z95 Year 2005 Container system. Hiab Type: XR21S51 Itsdpfx Absxwp Dwo Usr 21,000 kg. 510 cm. To extended bumper: 600 cm. = Further Information = Technical Information Number of cylinders: 8 Drivetrain AdBlue System: Yes Axle Configuration Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steered; Tire tread left: 30%; Tire tread right: 30%; Brakes: Disc brakes Rear axle 1: Tire size: 315/80R22.5; Twin tires; Tire tread left inside: 50%; Tire tread left outside: 50%; Tire tread right inside: 50%; Tire tread right outside: 50%; Brakes: Disc brakes Rear axle 2: Tire size: 385/65R22.5; Steered; Tire tread left: 40%; Tire tread right: 40%; Brakes: Drum brakes Weights Unladen weight: 15,220 kg Payload: 12,780 kg Gross vehicle weight (GVW): 28,000 kg Functional Crane: Palfinger Financial Information Price: On request Identification Type number: R520 V8 6x2/4 / EPSILON CRANE + = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We speak Russian. We strive to provide correct information, but no legal claims can be derived from the displayed texts.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 65.000 km, moč: 110 kW (149,56 KM), število postelj: 4, število sedežev: 4, vrsta goriva: dizel, vrsta prenosa: samodejen, barva: bela, prva registracija: 04/2018, proizvajalec šasij: Fiat, model šasije: Ducato, skupna dolžina: 6.940 mm, največja dovoljena obremenitev: 3.500 kg, Oprema: ABS, airbag, centralno zaklepanje, dvižna postelja, elektronski program stabilnosti (ESP), garancija za rabljena vozila, klimatska naprava, kopalnica, letne pnevmatike, markiza, nadzor oprijema, navigacijski sistem, prha, računalnik na krovu, registracija vozila, satelitska antena, servovolan, sistem za imobilizacijo, tempomat, vgradna kuhinja, vozilo za nekadilce, zimske pnevmatike, - FIAT DUCATO 2.3TDI 150HP 3500KG Category B License - AUTOMATIC transmission - ABS - ESP - Hill Holder - Traction + - 16-inch alloy wheels - Automatic cab air conditioning - Multifunction onboard computer - Truck GPS - Rear view camera - Leather steering wheel and gear lever - Dashboard with Chrome Techno-Trim - Cruise control - Speed limiter - Daytime running lights - Body-colored white bumpers - Digital tablet holder and USB socket - Driver and passenger airbags - Swiveling and height-adjustable seats - Integrated seatbelts in the cab seats - Armrests on both seats + matching upholstery - Electrically adjustable, heated, anti-vibration mirrors - Additional blind spot mirrors - Electric window, driver’s left door - Central locking - Windscreen and side window blinds - Exterior lighting - Winter wheel kit (set of 4) - Rear wheel mud flaps - Reinforced GFK roof Living area: Itedswdwx Sjpfx Ab Ujr - 2 living area batteries (2 x 95Ah) - Exterior awning - THULE LIFT lowering bike rack - TV with swivel mount - Fully automatic satellite dish - TRUMA CP Plus heating system - Large Heki skylight in the lounge - Entry door with window - Entry door mosquito screen - Convertible “L” shaped lounge - Movable table with central leg - Large drop-down bed over cab - Rear double bed - 2 wardrobes - Partition door to bedroom/bathroom - Double-glazed tinted windows - Mini Heki skylight in rear bedroom - Mini Heki skylight above front drop-down bed - Garage rails with tie-down rings - 220V socket and lighting in garage - Vacuum cleaner with garage charger - Storage for 2 large gas bottles - DUOcontrol automatic gas bottle system - Gas alarm Bathroom: - Separate shower - Wooden shower tray grid - Swivel cassette toilet - Bathroom skylight - Towel bars on interior door Kitchen: - 3-burner hob - Large automatic AES fridge - Separate freezer - Stainless steel sink - Sink and hob covers - Mini Heki skylight in kitchen

Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: Extendable loading platform with rear chamfer approx. 500 mm x 8° 8 pairs of flip-out lashing rings 1 pair of recessed lashing rings at the front of the loading area Cutouts in the outer frame for securing straps Approx. 48 mm thick hardwood flooring; checker plate above the axles Two-Part Steel Ramps: One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg. Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually Tyres: 235/75 R 17.5 3PMSF Brake System: Brake system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU standards, 24 Volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer High-quality single-colour 2K topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel Structure: High-strength fine-grained steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the front wall 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connection panel 2 wheel chocks with holder on the front wall Mounting at the rear of the gooseneck for ALU approach ramps Bracket for beacon at trailer rear Galvanized supports under sloped area of load floor White reflective tape per EU regulations on sides, extension, and red at the rear Electro-hydraulic unit under the rear of loading platform Warning sign brackets including sockets left/right on gooseneck and rear plate Control valves for ramps mounted right side of trailer Iodpfol Sl Izox Ab Ujtr Mudflap at rear of trailer Manual and documentation on USB stick 3.5" loose king pin supplied On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH) Removable rear galvanized stakes (Body length approx. 2,560 mm) 3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container 6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame Galvanized extensions, extendable by approx. 230 mm per side Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor Checker plate coverings above the king pin and loading area...

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, Oprema: ABS, Loading platform: - Loading platform in extendable design with pneumatically operated locking mechanism - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetically controlled reverse lock, activated via reverse gear or manually - Axle tools - Tires: 435/50 R 19.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) Itedpfx Abji Dwlwj Uer Paintwork: - Premium, durable corrosion protection for the standard shot-blasted welded frame by means of two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in solid Novagrau - Rear end metallized and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grained steels. - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX on the front connection console with 24N, 24S & 15-pin sockets - Connections according to ISO standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection strip - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall approx. 1,600 mm high - Yellow reflective tape as per EU regulations, on the sides, on the extension and at the rear of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Loading area with approx. 38 mm thick hardwood floor - 10 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the platform - 1 spare wheel holder beneath the loading area on the right in the direction of travel - User manual and documentation on USB stick - One mudflap at the rear of the trailer - Bracket for a revolving beacon at the rear of the trailer - On the gooseneck and on the rear panel, left and right, each a bracket for warning boards including socket - One INOX toolbox transversely mounted beneath the platform (1,000x400x2,500mm) - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container - 3 sets of crosswise post pocket bars mounted in the platform for 100 x 50 mm plug-in posts - 60 km/h speed sticker on the rear - 2 reversing spotlights mounted on the rear panel - Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light - Mounting bracket for rotating beacon on the warning sign - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, the defined visible surfaces then hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminum 15%)

Stanje: rabljeno, prevoženi kilometri: 314.000 km, Leto izdelave: 2011, Tovornjak z 3 osmi, skupna dovoljena masa 26 t, opremljen s zamenljivim nadgradnim sistemom Meiller serije RK20165TS z obračanjem, nosilnost 14.420 kg, medosna razdalja 4.500 mm, samodejni menjalnik, spalna kabina, primeren za prikolico, ustreza normi Euro 5. Iodpfoxyk Hxsx Ab Uetr