Faymonville 5-Achs-Doppeltele-Semi-Zwangsgelenkt nakup rabljenega (42.789)

Stanje: novo, lastna masa: 7.900 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, obratovalna teža: 7.900 kg, Oprema: ABS, Swan Neck: - Swan neck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood decking Loading Area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Recess in the chamfer and encroaching into the loading area for receiving the excavator bucket stick approx. 2,900 x 750 x 210/290 mm - Cut-outs in the external frame of the loading area for attaching tension straps - Hardwood decking approx. 48 mm thick, over the axles with tread plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle self-steering t- Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - TPMS tyre pressure monitoring system compliant with ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure blasted automatically by wheel blast machine after welding - Second blasting with corundum for optimal adherence of the coating system - Final coating: two layers of 2K top coat, solid colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and coated in RAL 9010 (Pure White) - Cavity sealing with special wax Electrical System: - Electrical system according to EU standards, 24 volt ASPÖCK-NORDIK (ASS3) lighting - ASPÖCK-UNIBOX at front connection rail with sockets 2x 7-pin & 1x 15-pin Included Accessories: - Multiple lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on galvanized front connection rail - 4 wheel chocks with holders mounted on the front wall - Receiver at rear of swan neck for ALU loading ramps - Galvanised folding supports beneath rear chamfer of loading area - Bracket for beacon at rear of trailer - Galvanised extendable outriggers, extendable by approx. 230 mm per side - White reflector tape to EU spec at sides and rear, red at rear - Brackets for warning signs on left and right of swan neck and rear panel, including socket - ALU side boards and rear board on swan neck, removable, approx. 2,440 x 400 mm - Rear galvanised stake pockets are removable - 2 pairs WADER container pockets in loading area for 20ft container - 6 pairs stake pockets for removable stakes 100 x 50 mm in the outer frame - Adjustable hanging rail for ALU access ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area chamfer - Sand-finish anti-slip coating painted onto the tread plate on swan neck and loading area - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with position light - Bracket for beacon fitted to warning boards - 80 km/h speed sticker rear and on both sides - European reflective signs (Red-Yellow) at the rear of trailer - Manual and operating instructions on USB stick Fgedpfx Aljunrapj Hsb - HRM metallisation (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then specified visible surfaces metallised with ZINACOR 850 (Zinc 85% - Alu 15%) hot-finished

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm Fgsdpfx Astvfkfsl Hob - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: novo, lastna masa: 12.000 kg, največja dovoljena obremenitev: 54.000 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable loading platform with rear bevel approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the platform (LC 10,000 daN) - Cut-outs in the outer frame for tensioning straps (LC 2,000 daN) - Hardwood floor approx. 48 mm thick, checker plate over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Brake system: - WABCO brake system according to EU regulations with EBS-E (4S3M) Steel construction: - High-strength fine-grained steel chassis Axles and tires: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - Axle tool kit - TPMS tire pressure monitoring system to ECE R 141 - Tires: 245/70 R 17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, operated from front and rear using a cable remote control with push buttons, with single-track monitoring of axles - European reflective panels (red-yellow) on trailer rear - White reflective tape in accordance with EU regulations on sides and on extension, rear red Fgsdpfx Aloykpbko Heb - Mountings on gooseneck and rear left/right for warning signs, incl. socket - Galvanized extensions, pull-out approx. 230 mm per side - Mount for rotating beacon at rear of trailer - Galvanized folding supports under the rear slope of the loading area - Mudflap at the rear of the trailer - Manual and documentation on USB stick - BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 and removable pump guard - Removable ALU side boards and rear board on gooseneck, approx. 2,440 x 400 mm - Rear removable, galvanized stanchions (superstructure length approx. 2,560 mm) - INOX toolbox 1,350x400x400 mm on gooseneck - Note: toolbox covers oil filler cap - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft or 1x 45ft container - 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame - Sliding mounting bar for ALU loading ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the sloping rear section - Lift axle on front axle with control via TEBS-E depending on current axle load and load condition - Four extendable warning boards, approx. 400 mm, size approx. 423 x 423 mm, each with position light - Mounting for rotating beacon on the warning boards - Radio remote control for forced steering, additionally to cable remote, with indicator lights on receiver for single-track monitoring - Checker plate surfaces on gooseneck and loading area with painted-on sand coating for slip resistance - 80 km/h speed stickers on rear and both sides - Load gauge for axle load measurement, incl. load diagram

Stanje: rabljeno, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2018, dolžina tovornega prostora: 13.720 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, Oprema: ABS, Vehicle identification no.: YAFSR3001J0021353 Fgsdpfsyw Dl Eex Al Heb Extendable by 8,200 mm with sliding table Container pockets WADER for 1 x 20", 2 x 20", 1 x 40", extendable to 45" container German MOT (HU) valid until 02/2027 – Safety inspection (SP) until 08/2026 SAF axles with drum brakes 3 hydraulically-mechanically steered axles on turntable with cable control and radio remote control Automatic self-tracking Platform dimensions: 13,720 mm – loading height: 1,100 mm Fifth wheel height: 950 – 1,050 mm Rear steering angle: 2,100 mm Stake pockets in the floor, including stakes (completeness not guaranteed) NATO socket Electro-hydraulic power unit Width marker lighting Toolbox Central lubrication system Tyres: 235/75 R 17.5 Spare wheel holder WITH spare wheel Modifications, prior sale, and errors excepted. This description serves for general vehicle identification and does not constitute a warranty in the legal sense of sale of goods law. The specification in the purchase contract is decisive. Our offer is generally without new TÜV (MOT) approval. If a new TÜV approval is required, we can provide an offer through our partner workshops! The vehicle may be equipped with stickers and/or advertising. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, prva registracija: 12/2019, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, Oprema: ABS, Vehicle Identification No.: YAMT23XX1K0104335 TELESCOPIC extendable by 7,300 mm CONTAINER POCKETS WADER for 1 x 20", 2 x 20", 1 x 40", 45" container when extended German Inspection (HU) valid until 02/2027 - Safety Inspection (SP) until 08/2026 SAF axles with drum brakes 3 hydraulically/mechanically steered axles with cable control + remote radio control Platform dimensions: 13,500 mm (including 500 mm tapered) - Loading height: 1,100 mm Fifth wheel height: 950 - 1,050 mm Rear steering radius: 2,100 mm Stake pockets in the floor, including stakes (completeness not guaranteed) NATO socket - electro-hydraulic unit Width marker lights Toolbox Central lubrication system Tyres: 235/75 R 17.5 Spare wheel carrier WITH spare wheel Changes, prior sale, and errors excepted. The description serves general vehicle identification and does not constitute a warranty in the legal sense of sales law. The purchase contract description is binding. Our offer is generally without new roadworthiness inspection (TÜV). Should a new inspection be desired, we will be happy to provide you with an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms of delivery and payment apply. Fsdpfx Aoywqduel Hegb

Stanje: rabljeno, lastna masa: 11.800 kg, največja dovoljena obremenitev: 36.200 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2022, skupna dolžina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17,5, Oprema: ABS, Faymonville Telemax F-S43 Low Loader | 3 axles steered via remote control | Heavy-duty lashing points | SAF axles | extendable | insertable stanchions | Tyres: 245/70 R17.5 | Gross weight: 48,000 kg, payload: 36,200 kg | 13,500 mm + 7,900 mm + 8,100 mm | Subject to errors, input mistakes, and prior sale. Fjdpfx Alswm I Ips Hogb

Stanje: rabljeno, številka stroja/vozila: YAFTL408100008968, konfiguracija osi: 3 osi, prva registracija: 01/2008, skupna dolžina: 13.400 mm, skupna širina: 2.750 mm, skupna višina: 3.400 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2008, = Additional Options and Equipment = - Steering axle - Drum brakes = Remarks = Chassis Diameter of kingpin / fifth wheel: 2 inch Height of kingpin / drawbar: 120 cm Drum brake: ✓ Structure Year of manufacture: 2008 Fjdpfx Aloxhgiro Hegb = Further Information = Axle Configuration Axle brand: Gigant Brakes: Drum brakes Suspension: Air suspension Front axle: Tire size: 245/70 R17.5; Tire tread left: 60%; Tire tread right: 35% Center axle: Tire size: 245/70 R22.5; Tire tread left: 25%; Tire tread right: 50% Rear axle 1: Tire size: 245/70 R17.5; Steering; Tire tread left: 45%; Tire tread right: 20% Rear axle 2: Tire size: 245/70 R17.5; Steering; Tire tread left: 50%; Tire tread right: 60% Weights Unladen weight: 17,500 kg Payload: 47,500 kg Gross vehicle weight: 65,000 kg Functional Body brand: Faymonville = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: rabljeno, številka stroja/vozila: ***YAMT13XX6K0104043, konfiguracija osi: 3 osi, prva registracija: 01/2019, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 3.410 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: drugo, Leto izdelave: 2019, Chassis Chassis height: 87 cm Kingpin / Fifth wheel diameter: 2 inches Height of kingpin / drawbar: 120 cm Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Loading deck length: 930 cm Ramp length: 395 cm Gooseneck length: 415 cm Low loader: ✓ Maximum width: 300 cm (25 cm per side) Max. length: 1380 cm Extendable: ✓ Tank Fuel: ✓ = Further Information = Axle configuration Tyre size: 235/75 R17.5 Axle brand: Saf Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Tyre tread left outer: 60%; Tyre tread right outer: 60% Axle 2: Twin tyres; Tyre tread left outer: 20%; Tyre tread right outer: 30% Axle 3: Twin tyres; Steering; Tyre tread left outer: 55%; Tyre tread right outer: 50% Weights Unladen weight: 10,040 kg Payload: 30,960 kg Gross vehicle weight: 41,000 kg Functional Body make: Faymonville Loading platform height: 87 cm Identification Registration number: C505325 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Fedpfeu H D R Esx Al Hjgb Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: rabljeno, največja dovoljena obremenitev: 39.780 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, naslednji pregled (TÜV): 01/2027, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from equipment. Full equipment list available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Platform: * Extendable loading platform * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN) * Hardwood floor approx. 48 mm thick, over axles with chequer plate flooring Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: * Tyres 205/65 R 17.5 twin-mounted Axles: * BPW axles, two rigid axles, two steering trailing axles, air suspension, drum brake with raise/lower function * Steering trailing axles equipped with electro-magnetic reverse lock, activated by reverse gear or manually Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M) without connections to the tractor unit Steel Construction: * Steel construction made of high-tensile fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame, provided by a two-component zinc-rich primer * High-quality, single-color two-component top coat in RAL 3002 Carmine Red * Rear section metallized and painted RAL 9010 (Pure White) * Wheels in silver Electrical System: * Electrical system in accordance with EU regulations Lighting: * 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Included Accessories: Fjdpfx Alox Uvlro Hegb * 2" kingpin * Galvanized steel front wall, approx. 400 mm high * Spare wheel carrier in front of the front wall * Yellow-red air couplings on the galvanized front connection panel * 4 wheel chocks with holders on the front wall * Provision at rear of gooseneck for ALU loading ramps * Galvanized folding supports under the sloped section of the platform * Holder for a warning beacon at the rear of the trailer * Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer * Mountings for warning boards left and right on the gooseneck and rear panel, including power socket * One mudflap at the rear of the trailer * Manual and description on USB stick * European reflective signs (red-yellow) at the rear of the trailer * 80 km/h speed stickers at the rear and on both sides * Acoustic reverse warning signal * Load gauge for determining axle loads, including load diagram

Stanje: novo, največja dovoljena obremenitev: 39.720 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including immediately and short-term available units, can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * With beveled front corners, approx. 45°, and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area * Extendable loading area version * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of lashing rings laid flat at the front of the loading area (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing legs * JOST (mechanical) with two-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles * BPW axles, two fixed, two self-steering, with drum brakes * Air suspension with raise/lower function * Self-steering axle with electromagnetic reverse lock, activated by reverse gear or manually * Tyres: 205/65 R 17.5 Braking system * Wabco braking system meeting EU regulations with EBS-E (4S3M), without interconnection lines to the tractor unit Steel Construction * Made from high-tensile fine-grain steels Fodpfx Aeu Sd U Ujl Hjgb * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, long-lasting corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer * High-grade, single-color two-component (2K) topcoat in RAL 3002 Carmine Red * Rear section metallized and finished in RAL 9010 (Pure White) * Wheels in silver Accessories included * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on galvanized front connection rail * 4 wheel chocks with holder on the front wall * Rear section of the gooseneck with mounting for aluminium ramps * Galvanized folding supports under the rear bevel of the loading area * Bracket for a beacon on the trailer’s rear * Yellow reflective tape on the sides, extension, and rear, in compliance with EU regulations * Holders for warning signs with socket on left and right of gooseneck and rear panel * TPMS tire pressure monitoring system according to ECE R 141. Data transfer to the towing vehicle is via the standardized EBS interface per ISO 11992; for correct display the towing vehicle must be able to receive and display the data * On the gooseneck: clip-on aluminium side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * One galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding brackets for aluminium ramps at the vehicle’s rear * 7 pairs of stake pockets for removable stakes, approx. 100 x 50 mm in the outer frame of the loading area * One galvanized transverse holder under the loading area * Galvanized, extendable outriggers for widening by approx. 230 mm per side * Lift axle on the front axle controlled by TEBS E depending on current axle load and loading condition * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Stanje: rabljeno, skupna masa: 70.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/1998, Oprema: ABS, Vehicle identification number: XL952N5SAWL007036 Fifth wheel load: 20,000 kg - Axle loads: 5 x 10,000 kg Unladen weight: 13,100 kg Roadworthiness test (HU) due Neck length: 4,100 mm Coupling height: 1,250 mm Low-bed: Length: 9,200 mm (650 mm thereof chamfered) -- Width: 2,525 mm -- Loading height: 880 mm Extendable by 6,200 mm Widenable to 3,000 mm Detachable rails Axle load (technical): 5 x 10,000 kg SAF axles with drum brakes Axles 1, 2: liftable Axles 5, 6: friction-steered Tyres: 235/75 R 17.5 ===== Fodpoyx N Dvjfx Al Hjgb Subject to changes, prior sale and errors. The description is for general identification of the vehicle and does not constitute a warranty in the legal sense. The purchase contract description is binding. Our offer is generally without new roadworthiness inspection (TÜV approval). If a new TÜV approval is required, we will gladly provide you with an offer from our partner workshops! Vehicle may be stickered and/or lettered with advertisements. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, skupna masa: 39.500 kg, konfiguracija osi: 3 osi, prva registracija: 07/2022, dolžina tovornega prostora: 13.400 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, Leto izdelave: 2022, Oprema: ABS, lfd 12389 LOW-LOADER MAX TRAILER 3-axle F-S43-1AAF / EXTENDABLE 4500 mm / STEERED AXLE Make/Manufacturer: MAX TRAILERS First registration: 07/2022 Dimensions: 13,400 x 2,540 x 890 mm Gross vehicle weight: 49,500 kg Unladen weight: 10,284 kg Payload: approx. 38,000 kg Kingpin load: 18,000 kg Air suspension with raise/lower function Drum brakes ABS EBS Fgsdpfx Asy Ag Adjl Hsb Mileage: 142,000 km Axle make: BPW 10.5 t Lifting axle Steered axle Trailing steering axle Lash rings Superstructure paint: red Chassis paint: GALVANIZED / RED Tyres: 12 units Tread depth: 7 - 10 mm Rear axle tyres: 235/75 R 17.5 MAX = FAYMONVILLE MAX 100 Ideal for concrete slabs / timber walls / precast concrete components etc. Side extension: 1,200 mm / hardwood floor Rear loading edge: 890 mm Lowered: 840 mm Container locks for: 1 x 40/30 and 20 ft containers Includes 4 x twistlocks Stake pockets + 5 t lashing rings on floor EXTENDABLE by 4,500 mm in 500 mm increments Intermediate table can be removed TRAILING STEERED AXLE ALUMINIUM AIR TANK / HOT-DIP GALVANIZED EXCELLENT CONDITION!!!!! Currently, sample images from 06.2025 All details subject to change, prior sale reserved! If you have any questions regarding this or other vehicles, please call us. If you have any questions about this or another trailer/car, please call us.

Stanje: rabljeno, lastna masa: 14.100 kg, največja dovoljena obremenitev: 33.900 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/1999, vzmetenje: zrak, velikost pnevmatike: 235/75 17,5, stanje pnevmatik: 50 odstotek, barva: zelen, Leto izdelave: 1999, velikost sprednje pnevmatike: 235/75 17,5, velikost zadnje pnevmatike: 235/75 17,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: registracija tovornjaka, Reference number for inquiries: 68574 Faymonville, Platform trailer * Year of manufacture: 1999 * Air suspension * Steering axle * Forced steering axle * Air supply coupling heads (red + yellow) * Connection plug: 2x 7-pin * Lifting and lowering device * Telescopic – extendable semi-trailer * Suspension: air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload: 33,900 kg * Permissible total weight: 48,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 50% -- 50% - Tire size: 235/75 R17.5 Fgodeyib Ahopfx Al Hsb * Tire condition 2nd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 3rd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Superstructure manufacturer: ES-GE * Extension defective * Steering axles inoperative * Mobile/rollable Liability disclaimer: Subject to alterations, prior sale, and errors excepted. Find more photos and videos on our homepage. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing solutions * Handling of all (export) documentation * Ordering export or customs license plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading and load securing * TÜV inspections and registration service * Transport of commercial vehicles Please contact our trained specialist staff—we are happy to assist you.

Stanje: rabljeno, največja dovoljena obremenitev: 56.200 kg, skupna masa: 69.800 kg, konfiguracija osi: 3 osi, prva registracija: 10/2021, dolžina tovornega prostora: 12.500 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.625 mm, Leto izdelave: 2021, Oprema: ABS, FYAMONVILLE 4(2+2)-axle MULTIMAX low loader semi-trailer, air-suspended, with 2 self-steering trailing axles Type: Multi-N-4(2+2)L-AUM-18AT-8.80-17.5-2.54-RM German trailer, 1st owner 4.1 m telescopic extension, fully hydraulic ramps and supports, wheel recesses, extensions, ALLOY WHEELS, FULL EQUIPMENT!!! Gooseneck: Gooseneck SNT design approx. 3.7 m, bevel approx. 1,000 mm x 10° Loading platform: Telescopic loading platform, approx. 8.8 m long, ramped at approx. 500 mm x 10° Excavator dipper recess approx. 2,490 x 750 x 210 mm Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually Axles and suspension: 4x BPW axles 12 t, 2 fixed, 2 trailing, self-steering axles Electromagnetic reverse gear lock + manual operation Air suspension with raise/lower valve Tyres: 235/75 R17.5 3PMSF MICHELIN / PIRELLI Load index: 143/141J (144/144F), new spare wheel 16x ALLOY WHEELS, POWDER-COATED WABCO brake system, EBS-E EU regulations 24-volt lighting system by ASPÖCK-NORDIK ASPÖCK-UNIBOX sockets: 24N, 24S & 15-pin PAINTWORK Standard HRM metallization of outer frame Complete steel structure shot-blasted, ARC-ZINCED ZINACOR 850 (Zinc 85% - Alu 15%) hot finished Steel structure: Steel grades: * S355J2+N/S355MC (yield strength 355 MPa) * S690QL/S700MC (yield strength 690 MPa) * Welders certified to DIN-EN 287-1 * Welding process MAG according to EN ISO 4063 * Shielding gas M21 according to EN ISO 14175 Accessories: * Removable steel front wall, approx. 400 mm high * NATO socket + spiral cable * 3 kW electro-hydraulic power unit for hydraulic functions Fgodpoy Iq Arsfx Al Hsb * Spare wheel bracket on the front wall * Mounting holes for bolt-on lashing rings * First hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings (LC 5,000 daN) * Mounting hole at the upper rear of the outer longitudinal member * 1 pair screw-in lashing rings (LC 10,000 daN) * Gooseneck with approx. 40 mm thick hardwood flooring * 1 pair removable aluminum side boards, aluminum rear board approx. 400 mm high, anodized * 2" kingpin * Guide plate on the gooseneck for the fifth wheel plate approx. 500 mm wide * 4 wheel chocks with bracket * Receptacles for ALU approach ramps * JOST mech. landing gear with 2-speed gearbox and crank * Continuous hardwood flooring, approx. 50 mm thick, interrupted between axles * Platform lock with conically welded locking profiles, 250 mm incl. pretension plate * Slots for insertable and repositionable bridging elements at the front of the platform * 1 intermediate table with offset platform, approx. 300 mm wide for the sliding tube * Front and rear with slots for insertable and repositionable bridging elements * Removable cover flush with the loading platform * Extensions extendable by approx. 230 mm per side * 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm, in platform before 1st axle * Wheel recess covers split lengthwise, with wooden overlay, secured externally with locking pins * Wheel recesses with steel covering and 15 x 15 mm square climbing bars approx. every 200 mm * Between the 2nd and 3rd axle, in the platform, one pair of fixed wheel recesses * Rubber flooring "Super Grip" 25 mm and steel covering approx. 5 mm as additional reinforcement on the ramped section of the platform * Control valves for hydraulic ramps on the right an...

Stanje: rabljeno, največja dovoljena obremenitev: 34.030 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2026, skupna širina: 2.480 mm, Oprema: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment list. Complete configuration upon request. Gooseneck: * Gooseneck with rear bevel, approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick loading area; loading area behind the gooseneck hydraulically raisable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings on the front central beam (LC 10,000 daN) Fgsdpfxsy Nu Hko Al Hob * Grating floor C40/4 (point load approx. 2.3 t on an area of ca. 20 x 20 cm) over axles with checker plate covering Two-piece steel ramps: * One pair of galvanized, two-piece reinforced steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating floor C40/5 (point load approx. 8 t on an area of ca. 20 x 20 cm) * Ramp with hydraulically folding and retractable ramp sections and hydraulic lifting device, max. load per pair: 40,000 kg * In accordance with regulation 1230/2012/EU, ramps shorter than 300 mm do not count towards the vehicle length of 16,500 mm in driving position Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) * Tires 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system according to ECE R 141 Axles: * BPW axles and suspension * 2 fixed axles, 1 self-steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock activated via reverse gear and manually * Air suspension with lift and lower valve Braking system: * WABCO braking system in accordance with EU regulations, with EBS-E (2S2M) Colours: * Semi-trailer RAL 3002 carmine red * Rims silver * Tarpaulin in RAL 9006 silver Incl. accessories: * 1 spare wheel holder under the load bed, right hand side * 2-inch kingpin * Galvanized steel front wall * Yellow-red air couplings at the front galvanized connection rail * 4 wheel chocks with holder at the front wall * 3 heights of wooden planks * Galvanized folding supports under the loading area bevel * Height-adjustable tarpaulin body, approx. 3,960 mm * Galvanized front wall with a tensioning system for sliding curtains * Roof by EDSCHA, height-adjustable by approx. 400 mm, forward slidable on aluminum roof rail profiles (bolted to front and rear wall) * 3 pairs of movable stakes/restraining pillars in the load bed * Structure at the rear can be hydraulically widened to the left and right by approx. 750 mm * Sliding tarpaulin with approx. 700 mm reserve in length, with tensioning straps spaced at approx. 600 mm height * Upper edge of the body approx. 3,960 mm (loaded) * Driving with open sliding roof is not permitted and will damage the tarpaulin * Non-slip sand coating painted on checker plate sheets on the gooseneck and load bed * Cover plates to bridge the gap between the ramps and loading area * Electro-hydraulic unit mounted at the rear under the load bed * Mounting brackets for warning signs on both sides of the gooseneck and ramps, including socket * Control valves for the ramps on the right side of the semi-trailer * Grating floor C30/3 in the bevelled area of the gooseneck (point load approx. 2 t on a 20 x 20 cm area) * Grating floor in the bevelled area of the loading a...

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 03/2003, dolžina tovornega prostora: 12.500 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.620 mm, skupna dolžina: 12.500 mm, skupna širina: 2.550 mm, skupna višina: 1.620 mm, vzmetenje: hidravlika, velikost pnevmatike: 275 / 70 R22.5, barva: bež, Leto izdelave: 2003, Konfiguracija osi Dimenzija pnevmatik: 275 / 70 R22.5 Znamka osi: SAF Vzmetenje: hidravlično vzmetenje Zadnja os 1: dvojna montaža; os z možnostjo dviga; maksimalna osna obremenitev: 10.000 kg; krmiljena Zadnja os 2: dvojna montaža; maksimalna osna obremenitev: 10.000 kg Zadnja os 3: dvojna montaža; maksimalna osna obremenitev: 10.000 kg; krmiljena Zadnja os 4: dvojna montaža; maksimalna osna obremenitev: 10.000 kg; krmiljena Zadnja os 5: dvojna montaža; maksimalna osna obremenitev: 10.000 kg; krmiljena Teže Lastna teža: 13.100 kg Nosilnost: 61.900 kg Skupna dovoljena masa: 75.000 kg Funkcionalno Višina tovorne površine: 162 cm Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Finančne informacije Cena: po dogovoru Dodatne informacije Fedpjuu E S Ssfx Al Hogb Za več informacij kontaktirajte Stefana Schaapvelda.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 12.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2022, Leto izdelave: 2022, Faymonville 2-axle lowbed semi-trailer MEGAMAX 2x12 t PA 2 steered axles Single-extendable, 2 x 12 t pendle axles Overall length: approx. 13,500 mm Overall width: approx. 2,550 mm Neck width: approx. 2,480 mm Load bed width: approx. 2,550 mm Chassis width: approx. 2,550 mm Technically extendable: approx. 4,700 mm Coupling height (loaded): approx. 1,205 mm Loading height (max. loaded): approx. 1,005 mm Load area length: approx. 6,850 mm Chassis length: approx. 2,600 mm King pin distance to front: approx. 1,200 mm Swing radius of tractor unit (rear): approx. 2,300 mm Swing radius (front): approx. 1,800 mm Axle spacings: approx. 1,360 mm Gooseneck: - Gooseneck in SNT design for optimized load floor length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth-wheel load: 25,000 kg Fodpfsy Hxd Isx Al Hjgb Boiler deck: - Deep-designed extendable boiler deck "SUPER LOW" design - Length approx. 6,850 mm, with mechanical locking system Rear chassis: - Rear chassis with closed outer frame, chequer plate and continuous prism digger recess, approx. 1,250/700 x 505 mm, open at the rear - PENDLE-AXLE, all axles hydro-mechanically forced-steered - Burst hose valve on axle compensation cylinder with automated RESET function - Hydraulic cylinders with shut-off cocks and front pins to secure lifted position - Technical axle load: 12,000 kg each - Hydraulic axle levelling Brake system: - WABCO brake system, EBS-E according to regulations Chassis tyres: - 245/70 R 17.5 3PMS Metalizing: - Complete HRM metallization (High Resistance Metallisation) - Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85%, Alu 15%) Painting: - 6-coat final treatment - Entire steel structure shot-blasted after welding. One layer of zinc-based primer, one adhesion primer. Final coat with 2 layers of 2K lacquer (acrylic) in a single colour, followed by cavity sealing with special wax - Trailer colour: RAL 3002 Carmine Red - Rim colour: Silver Grey - Side board colour: Natural Aluminum Steel structure: - Steel structure made of high-strength fine-grained steels. - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690Q/S700MC (yield strength 690MPa) - MAG welding process according to EN ISO 4063

Stanje: novo, največja dovoljena obremenitev: 40.320 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Selection of equipment. Complete specification available on request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick. Loading area with 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing Gear: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * 205/65 R17.5 tyres – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141 Axles: Fgsdpey Aug Djfx Al Heb * BPW axles, two rigid and two self-steering axles * Air suspension with lift/lower function * Drum brakes * Self-steering axles with electromagnetic reversing lock, activated via reverse gear or manually Brake system: * WABCO brake system compliant with EU regulations and EBS-E (4S3M) Electrical system: * Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: * Steel structure made of high-strength fine grain steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection * Trailer colour RAL 3002 Carmine Red * Rims Silver Grey * Tarp RAL 9006 (brilliant direct) Options included: * At the gooseneck and at the rear, left and right, one bracket each for warning signs, including socket * 2-inch king pin * One galvanized steel front wall * Yellow-red air couplings at the galvanized front connection strip * 4 wheel chocks with holder on the front wall * 3 tiers of wooden boards * Galvanized folding supports under the loading area bevel * One bracket for a revolving warning light at the rear end of the trailer * Height-adjustable curtain structure – approx. 3,960 mm? * Galvanized front wall with tensioning mechanism for sliding curtains. Height adjustable by approx. 400 mm * Roof brand EDSCHA, can be slid forward on ALU roof profile beams (bolted to front and rear wall) * 3 pairs of movable stanchions in the loading area * Body hydraulically extendable to the left and right at the rear by approx. 750 mm * Sliding roof with fold-up portal beam * Sliding tarp with 700 mm reserve in length; tie-down straps at approx. 600 mm intervals. Height upper edge of body approx. 3,960 mm (loaded) * Driving with the sliding roof open is not permitted and will damage the tarp * Body at the rear closed with anodized ALU swing doors * Latch-on rail for ALU loading ramps at the rear of the vehicle * Control valves for hydraulic widening fitted to the right-hand side of the trailer * White reflective tape as per EU regulations on the sides, red at the rear * Electro-hydraulic unit under the rear loading area * One mudguard at the rear of the trailer * European reflective signs (red-yellow) at the rear of the trailer * Hand…

Stanje: novo, največja dovoljena obremenitev: 36.590 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from equipment specifications. Complete equipment list available on request. Fjdpfey Auifsx Al Hjgb Neck: * Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Area: * Extendable loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out external lashing rings (LC 5,000 daN) * 3 pairs of fold-out external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cut-outs in the external frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate over the axles Tyres: * Tyres 245/70 R 17.5 3PMSF – brand at our discretion. Load index (146/146F) TPMS: * TPMS tyre pressure monitoring system compliant with ECE R 141. Data transfer to the tractor unit via the standardised EBS interface according to ISO 11992. For correct display, the tractor unit must support receiving and displaying this data. Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, all axles hydromechanically forced-steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting / lowering valve * Axle tool Brake System: * WABCO brake system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction: * Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations, 24V lighting ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15 pin. Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure is automatically shot-blasted with a centrifugal blasting machine after welding * Second sandblasting with corundum for optimal adhesion of the coating system * Final paint with 2 coats of 2K topcoat, single colour in RAL 3002 carmine red, according to RAL system 841GL * Rims in silver grey * Rear section metallised and painted in RAL 9010 (pure white) Accessories: * 2-inch king pin * One galvanised steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanised front connection rail * Spare wheel holder in front of the front wall (without spare wheel) * Electro-hydraulic power pack * Remote steering front and rear via cable remote control using push buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mounting rail for aluminium ramps at the gooseneck with integrated collision protection * Gooseneck and rear plate each fitted left and right with a bracket for warning boards incl. socket * Bracket for a rotating beacon at the rear of the trailer * Galvanised folding supports beneath the loading area’s rear bevel * 1 pair of recessed lashing rings along the central beam at the rear in the bevel (LC 10,000 daN) * Load gauge for determining axle loads including load diagram * Sanded coating applied to the checker plates on the gooseneck and loading area for slip resistance * Gooseneck fitted with plug-in aluminium side and rear panels, approx. 2,440 x 400

Stanje: novo, največja dovoljena obremenitev: 58.860 kg, skupna masa: 73.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approx. 30 mm thick Extendable loading platform: * Extendable loading platform with rear chamfer approx. 500 mm x 8° * 8 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick; checker plate flooring over the axles Two-piece steel ramps: Fjdpfx Aoy Augwel Hjgb * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber coating * Ramp with hydraulically folding and unfolding ramp sections * Hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 50,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not need to be included in the overall vehicle length of 16,500 mm when in driving position Axles: * BPW axles and suspension, 1st axle with steering, 2nd and 3rd rigid, 4th and 5th axles trailing-steered, air suspension, with raise/lower function, drum brakes * Trailing steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Technical axle load: 12,000 kg each Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck via standardized EBS interface according to ISO 11992. For correct display, the truck must be capable of receiving and displaying this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco brake system in compliance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel structure: * Steel structure made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot blasted after welding with a blast wheel system * Second blasting treatment with corundum for optimum adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paint finish with two coats of 2K topcoat, single color in RAL 3002 carmine red according to RAL system 841GL * Rear section metallized and painted in RAL 9010 (pure white) Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * A spare wheel carrier in front of the front wall * Yellow-red air couplings at the galvanized front connection strip * A bracket for a rotating beacon at the rear of the trailer * Galvanized supports under the chamfered section of the loading platform * Super Grip 2 rubber coati

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Partial equipment listing. Full equipment details available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Two-part steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism * Maximum load per pair: 30,000 kg Landing legs: * JOST landing gears (manual) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated via reverse gear and manually * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations with EBS-E (2S2M) without connectors to the tractor unit Steel structure: * Steel construction made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final coating with 2 layers of two-component topcoat, single colour in RAL 3002 carmine red, in accordance with RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Wheels in silver Including accessories: * One bracket for warning signs on both sides at the gooseneck and at the rear, including socket Fgsdpfxsy Auhue Al Hsb * 1 spare wheel holder under the loading area on the right-hand side * 2" kingpin * Galvanized steel front wall * Yellow-red air couplings on the galvanized connector strip at the front * 4 wheel chocks with holders on the front wall * 3 height-adjustable wooden planks * Galvanized folding supports under the loading area bevel * Bracket for a rotating beacon at the rear of the trailer * Height-adjustable tarpaulin frame (approx. 3,960 mm) * Galvanized front wall with tensioning mechanism for sliding curtains, height-adjustable by approx. 400 mm * EDSCHA roof, forward-sliding, on aluminium roof beam profiles (bolted with front and rear wall) * 3 pairs of sliding stakes in the loading area * Superstructure can be hydraulically widened at the rear to left and right by approx. 750 mm * Sliding roof with liftable portal carrier * Sliding tarpaulin with approx. 700 mm slack in length, with tensioning straps spaced approx. 600 mm

Stanje: novo, največja dovoljena obremenitev: 37.980 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Fsdpfx Alsy Aufmj Hogb Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with approx. 45° beveled front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform (extendable version): * Extendable loading platform with rear chamfer approx. 1,000 mm x 8° * 6 pairs of folding-out lashing rings (LC 5,000 daN) * 3 pairs of folding-out lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick, with checker plate over the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t static load) Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit is via the standardised EBS interface per ISO 11992. For correct display, the tractor unit must be able to transmit and display these data. Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock activated by reverse gear and manually * Air suspension with lift/lower valve * Axle tools Brake system: * Brake system compliant with EU regulations with EBS-E (2S2M), no connecting lines to the tractor unit Steel construction: * Steel construction made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically shot-blasted after welding with blast wheel machine * Secondary blasting with corundum for optimal coating adhesion * Final painting with 2 layers of 2K topcoat, single colour RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver-grey * Rear section metallized and painted in RAL 9010 (pure white) * Paint system tested in salt spray test per ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights synchronized with the indicator * ASPÖCK-UNIBOX at the front connector rail with sockets: 24N, 24S, & 15-pin according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel carrier in front of the front wall * Yellow-red air couplings on the galvanized front connection rail * 4 chock blocks with holder at the front wall * Mount at the rear of the gooseneck for ALU approach ramps * Galvanized folding supports under the loading platform rear chamfer * At the gooseneck and on the rear panel, left and right, each with a bracket for warning signs including socket * Load gauge for determining axle loads with load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable. (Superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2011, dolžina tovornega prostora: 9.400 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, skupna dolžina: 12.700 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: modra, Leto izdelave: 2011, Oprema: ABS, = Additional Options and Accessories = - Lift axle = Remarks = SAF axle with drum brakes. 1 x lift axle. 1 x self-steering/trailing steering axle. = Further Information = Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; Tread depth left inside: 40%; Tread depth left outside: 40%; Tread depth right inside: 40%; Tread depth right outside: 40% Rear axle 2: Twin tyres; Tread depth left inside: 70%; Tread depth left outside: 70%; Tread depth right inside: 70%; Tread depth right outside: 70% Rear axle 3: Twin tyres; Steered; Tread depth left inside: 50%; Tread depth left outside: 50%; Tread depth right inside: 50%; Tread depth right outside: 50% Weights Unladen weight: 10,500 kg Payload: 44,500 kg Gross vehicle weight: 55,000 kg Identification Type number: STN-3U / HYDRAULIC RAMP / LIFT A = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We make every effort to provide accurate information but no rights can be derived from the texts provided. Fodpfx Asy Daxzsl Hegb

Stanje: rabljeno, lastna masa: 11.200 kg, največja dovoljena obremenitev: 36.800 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you receive a current & comprehensive inspection and function report. Gooseneck: - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood floor Extendable loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widened sections in the lower area - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - Incl. 3-piece removable galvanized covers over the wheel recesses (width 670 mm) – max. point load 5 t / pc - Recess in the incline and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of swing-out lashing rings (LC 5,000 daN) - 2 pairs of swing-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator dipper recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting unit, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing self-steer axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock operable via reverse gear and manual activation - Air suspension with raise and lower valve - Axle tools - TPMS tire pressure monitoring system compliant with ECE R 141 Fgodpfx Alsyylduj Hjb - Tires: 235/75 R17.5 3PMSF Accessories included: - Bracket for warning signs on the gooseneck and at the rear, left and right, each with socket - One spare wheel with holder in front of the bulkhead - 2" kingpin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings at the front galvanized connection rail - 4 wheel chocks with holders - Galvanized, extendable width extensions approx. 230 mm per side - Galvanized folding supports under the incline of the loading area - Cover plates to bridge the gap between ramps and loading area - White reflective tape on sides and on extendable section, rear in red, according to EU regulations - Electro-hydraulic unit at the rear, under the loading area - European reflector boards (red-yellow) on the rear of the semi-trailer - Four extendable warning signs, each approx. 423 x 423 mm with position lamp (extend approx. 400 mm) - Bracket for rotating beacon on the warning signs - On the gooseneck, plug-in aluminium side and rear boards approx. 2,440 x 400 mm - Rear, galvanized plug-in stanchions removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area incline - Painted sand layer as anti-slip protection on chequer plates on the gooseneck and loading area - Speed sticker 80 km/h on rear and both sides - Load manometer for determining axle loads, including load chart

Stanje: rabljeno, lastna masa: 13.200 kg, največja dovoljena obremenitev: 52.800 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and function report. Fodsyffd Dopfx Al Hegb Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Load Area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame for attaching tension belts (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Axles and Tyres: - BPW axles and suspension, 1st axle rigid, all others hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with raise and lower valve - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Two-part Steel Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramp sections hydraulically foldable and retractable, with hydraulic lifting and shifting - Max load per pair: 40,000 kg Included Accessories: - 2'' king pin - Galvanized steel front wall approx. 400 mm high - Yellow and red air couplings to the galvanized coupling rail at the front - 4 wheel chocks - One spare wheel - Electro-hydraulic power unit - Remote steering front and rear via cable remote control with push buttons, including axle alignment monitoring - Mounting at the rear of the gooseneck for ALU approach ramps - EU reflective panels (red-yellow) at the rear of the trailer - White reflective tape on sides, extension and rear in red (per EU regulations) - At the gooseneck and ramps, left and right, holder for warning boards including socket - Holder for a rotating beacon at the rear of the trailer - Galvanized folding supports under the chamfered load area - Ramp control valves mounted on the right trailer side - Cover plates to bridge the gap between ramps and load area - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 - On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm - Rear galvanized plug-in stanchions removable (structure length approx. 2,560 mm) - INOX toolbox 1,350x400x400 mounted on the gooseneck, box covers oil filler cap - 4 pairs of WADER container lock pockets on load area, for 1x 20ft, 2x 20ft, 1x 40ft or 1x 45ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stanchions in outer frame - Galvanized, extendable platform wideners approx. 230 mm per side - Square-section climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfer - Lift axle on front axle with TEBS E control, based on axle load and loading condition - Four extendable warning signs, approx. 400 mm extension, dimensions 423 x 423 mm each with position light - Radio remote control for rear axle steering, in addition to cable remote, with signal lights for axle alignment on receiver - Anti-slip sand coating painted on checker plate surfaces of gooseneck and load area - 80 km/h speed decals rear and on both sides