Polpriklopnik z nizko nakladalno ploščadjo

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader

Stanje: novo, največja dovoljena obremenitev: 40.320 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, Oprema: ABS, Excerpt from Equipment List Gooseneck - Gooseneck with rear chamfer approx. 750 mm x 10°. - 3 pairs of lashing rings (LC 5,000 daN). - Hardwood decking approx. 30 mm thick. Loading Area - 5 pairs of lashing rings, foldable to the outside (LC 5,000 daN). - 3 pairs of lashing rings, foldable to the outside (LC 10,000 daN). - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN). - Hardwood decking approx. 48 mm thick, checker plate over the axles. Landing Legs - JOST mechanical landing legs with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t). Tyres - Tyres 205/65 R17.5 – make at our discretion. TPMS - TPMS tyre pressure monitoring system in accordance with ECE R 141. Axles - BPW axles: two fixed, two self-steering axles. - Air suspension with lift/lower function. - Drum brakes. - Self-steering axles with electro-magnetic reverse lock, activated via reverse gear or manually. Brake System - WABCO brake system according to EU regulations with EBS-E (4S3M). Electrical System - Electrical installation in line with EU regulations, LED lighting 24V ASPÖCK-NORDIK (ASS3). - All LED side marker lights flash in sync with indicator. - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets, connections as per ISO standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Gedpfx Asy Aug Dsdgoir Steel Construction - High-strength fine-grained steel construction. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa). Painting - Complete chassis metalized with ZINACOR 850 (85% zinc / 15% aluminium) for optimal corrosion protection. Colour - Trailer body: RAL 3002 Carmine Red - Wheel rims: Silver Grey - Tarpaulin: RAL 9006 (brilliant direct) Options Included - On gooseneck and at rear, left and right, each one bracket for warning signs with socket. - 2” king pin. - One galvanized steel front wall. - Yellow-red air couplings on galvanized front connection strip. - 4 wheel chocks with holders on the front wall (approx. 5 kg each). - 3-tier wooden side boards. - Galvanized foldable supports under rear chamfer of loading area. - Bracket for rotating beacon at rear of trailer. - Tarpaulin superstructure height-adjustable to 3,960 mm. - Galvanized front wall with tensioning mechanism for sliding curtains. Height-adjustable by approx. 400 mm. - EDSCHA roof, forward-sliding on aluminium roof beam profiles (bolted to front and rear wall). - 3 pairs of movable stanchions in loading area. - Body hydraulically extendable at rear to left and right by approx. 750 mm. - Sliding roof with fold-up portal beam. - Sliding tarpaulin with 700 mm longitudinal reserve, lashing straps approx. every 600 mm. - Height upper edge body approx. 3,960 mm (laden). - Driving with open sliding roof is not permitted and may result in damage to the tarpaulin. - Rear body closed with anodised aluminium double doors. - Hook-in bar for aluminium loading ramps at rear of vehicle. - Control valves for hydraulic widening on right side of trailer (approx. 4 kg). - White reflective tape in accordance with EU regulations on sides, red at rear. - Electric-hydraulic power pack under load area at the rear (approx. 45 kg). - Mud flap at rear of trailer. - European reflector plates (red-yellow) at rear of trailer. - Operating manual and documentation on USB stick. - Four extendable warning signs ± 400 mm, approx. 423 x 42 mm.

Stanje: novo, največja dovoljena obremenitev: 58.860 kg, skupna masa: 73.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Extract from Equipment Specification Gooseneck: Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick. Extendable loading platform: Extendable loading platform with rear chamfer approx. 500 mm x 8°. 8 pairs of fold-out lashing rings (LC 10,000 daN). 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN). Cut-outs in the outer frame for attaching tensioning straps (LC 2,000 daN). Hardwood floor approx. 48 mm thick, with checker plate covering over the axles. Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber coating. Ramps with hydraulically folding and unfolding ramp sections. Hydraulic lifting system, hydraulically adjustable. Max. load capacity per pair: 50,000 kg In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm in driving position do not count towards the vehicle length of 16,500 mm. Axles: BPW axles and suspension, 1st axle steered, 2nd and 3rd axles fixed, 4th and 5th axles trailing steered, air suspension, with lifting/lowering function, drum brakes. Trailing steering axles with electromagnetic reverse lock, can be activated via reverse gear or manually. Technical axle load: 12,000 kg each. Tyres: Tyres 235/75 R 17.5 3PMSF – Manufacturer of our choice. TPMS: TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transfer to tractor unit via standardized EBS interface according to ISO 11992. In order for the data to be displayed correctly, the tractor unit must be able to transmit and display these data. Landing gear: JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load). Brake system: Wabco brake system compliant with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit. Steel construction: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting. All LED side marker lights flash with the indicators. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting: Entire steel structure automatically blast-cleaned after welding using a shot blasting system. Second round of blasting with corundum for optimal adhesion of the coating system. HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) to guarantee optimal corrosion protection. Final coating with two layers of 2K topcoat, single colour in RAL 3002 carmine red, in accordance with the RAL system 841GL. Rear end metallized and painted in RAL 9010 (pure white). Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Spare wheel holder in front of the front wall Gsdpfx Ajy Augwedgjir - Yellow-red air couplings at the galvanized front connection strip - Bracket for a rotating beacon at the rear of the trailer - Galvanized supports underneath the loading platform chamfer - Super Grip 25 rubber covering in the chamfer area of the platform - Cover plates to bridge the gap between ramps and loading platform (±17 kg) - Electro-hydraulic power unit at the rear, under the loading platform

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Excerpt of Equipment Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10°. Godpjy Auhuefx Adgoir - 3 pairs of lashing rings (LC 5,000 daN). - Hardwood floor, approx. 30 mm thick. Loading Area: - Loading area with rear chamfer approx. 1,000 mm x 8°. - 5 pairs of fold-out lashing rings (LC 5,000 daN). - 3 pairs of fold-out lashing rings (LC 10,000 daN). - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN). - Hardwood floor approx. 48 mm thick, over axles with chequer plate covering. Two-Piece Steel Ramps: - One pair of galvanized, two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t over approx. 20 x 20 cm area). - Ramp with hydraulically foldable ramp sections and hydraulic lifting mechanism. - Maximum load per pair: 30,000 kg. Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, rated for approx. 24 t lift capacity (approx. 50 t test load). Axles: - BPW axles and suspension, 2 rigid axles, 1 self-steering trailing axle. - Technical axle load: 12,000 kg each. - Electromagnetic reverse lock actuated by reverse gear and manually. - Air suspension with lift/lower valve. Tyres: - Tyres 235/75 R 17.5 3PMSF – brand at our discretion. TPMS: - TPMS tyre pressure monitoring system according to ECE R 141. Brake System: - WABCO brake system as per EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit. Steel Construction: - Steel structure made of high-strength fine-grained steel. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system according to EU regulations, LED lighting 24V ASPÖCK-NORDIK (ASS3). - All LED side marker lights flash with the indicator. - ASPÖCK-UNIBOX at front connection strip with sockets 24N, 24S & 15-pin. - Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: - HRM metallization of entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure optimum corrosion protection. - Final painting with 2 coats of 2K topcoat, single colour RAL 3002 carmine red, as per RAL system 841GL. - Rear section metallized and painted RAL 9010 (pure white). Rims in silver. Incl. Accessories - One holder for warning panels on left and right at gooseneck and at rear, incl. socket. - 1 spare wheel holder under loading area, right in direction of travel. - 2” kingpin - One galvanized steel front wall. - Yellow-red air couplings at galvanized front connection strip. - 4 wheel chocks with holder at the front wall (±5 kg). - 3-height wooden planks - Galvanized folding supports under the loading area chamfer. - One holder for a rotating beacon at trailer rear. - Height-adjustable tarpaulin body 3,960 mm - Galvanized front wall with tensioning mechanism for sliding curtains. Height-adjustable by approx. 400 mm. - Roof by EDSCHA, movable forward on aluminium roof rail profiles (bolted to front and rear walls). - 3 pairs of sliding stanchions in the loading area. - Body hydraulically extendable to left and right at rear by approx. 750 mm. - Sliding roof with high pivoting header rail. - Sliding curtain with approx. 700 mm extra length, with tensioning straps spaced approx. 600 mm apart. - Height to top of body approx. 3,960 mm (loaded). - Operation with open sliding roof not permitted; doing so will cause damage to the …

Stanje: novo, največja dovoljena obremenitev: 47.300 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Gsdsyvnfgepfx Adgoir Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area in extendable design with rear chamfer approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * Recesses in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate flooring above the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, manufacturer of our choice Axles: * BPW axles, two rigid axles, two self-tracking axles, air suspension, drum brake, with lifting/lowering function * The self-tracking axles can be locked for reversing by electro-magnetic reverse lock via reverse gear or manually * Axle tools Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Premium and durable corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc dust primer * High-quality two-component (2K) topcoat, single colour, RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2-inch king pin * Galvanised steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanised connection strip at the front * Mount in the rear area of the gooseneck for ALU loading ramps * Galvanised folding supports under the rear chamfer of the loading area * Holder for a beacon at the rear of the trailer * On the gooseneck and at the rear end panel, left and right, holders for warning signs including socket * TPMS tyre pressure monitoring system according to ECE R 141 * On the gooseneck, plug-in aluminium side walls and tailgate, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Body length approx. 2,560 mm) * Galvanised toolbox integrated into the chamfered gooseneck * 3 pairs of WADER container pockets recesses in the loading area for a 20' (30') or 40' container * Sliding hooks for aluminium loading ramps at the rear of the vehicle * 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * Galvanised extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with control via TEBS E depending on the current axle load and current loading status * 2 LED reversing lights mounted on the rear end panel * 2 pairs Ferry-

Stanje: rabljeno, največja dovoljena obremenitev: 37.950 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2024, naslednji pregled (TÜV): 02/2026, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Selection of equipment features. Complete list of specifications available upon request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Telescopic loading area with rear taper approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing bars approx. 15 x 15 mm as well as extensions in the lower section * Between 1st and 2nd axle, 1 pair of fixed wheel recesses with covers, approx. 1,610 x 700 x 400 mm (L x W x D) * Recess in the rear slope and extending into the loading area for the excavator arm, approx. 2,900 x 750 x 210/290 mm (L x W x H) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 2 pairs of outward folding lashing rings (LC 10,000 daN) * Cutouts in the external frame of the loading area for hooking in tension belts (LC 2,000 daN) * Incl. 3-piece removable galvanized covers over wheel recess – max. concentrated load approx. 3.5 t / each Axles: * BPW axles and suspension, 2 rigid axles, 3rd axle self-steering * Technical axle load: 12,000 kg each * Electromagnetic reversing lock can be activated via reverse gear and manually * Air suspension with lift/lower valve * Axle toolkit Tyres: * 235/75 R 17.5 3PMSF tyres Landing gear: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t tested load) Brake system: * Brake system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel structure: * Steel structure made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (Yield strength 355 MPa); S690QL/S700MC (Yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer * High-quality single-colour top coat with a two-component (2K) paint in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Included accessories: * 2-inch king pin * 1 galvanized steel front wall, approx. 400 mm high * 1 spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection rail at the front * 4 wheel chocks with holders on the front wall * Mounting at the rear of the gooseneck for aluminium loading ramps * Galvanized folding supports under the rear slope of the loading area * Bracket for a beacon at the rear of the trailer * Yellow reflector tape as per EU regulations on the sides, extension and rear of the trailer * Brackets for warning boards including sockets on left and right of gooseneck and rear plate * Mud flap at the rear of the trailer * Manual and documentation on USB stick * Bracket for beacon on warning boards Gedpfx Aoyc Axyodgeir * European reflective plates (red-yellow) at the rear of the trailer * Speed stickers 80 km/h at the rear and on both sides * Load gauge for axle load determination incl. load diagram * Detachable aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H) * The rear galvanized stake pockets are removable (body length approx. 2,560 mm) * A tool ...

Stanje: novo, največja dovoljena obremenitev: 39.670 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment features. Complete specifications available upon request. Gooseneck: * Gooseneck with approx. 30 mm thick hardwood flooring * Gooseneck rear in straight version Giodpoxarlvsfx Adgor * 3 pairs of lashing rings (LC 5,000 daN) Load area: * Extendable load area * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the load area (LC 10,000 daN) * Cutouts in the outer frame of the load area for attaching tensioning straps (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, chequer plate covering above the axles Landing legs: JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, two fixed axles, two trailing steerable axles * Air suspension with raise/lower function * Steering axles with electro-magnetic reversing lock, activated via reverse gear or manually * Drum brakes * Axle tools Tyres: * 205/65 R 17.5 * Manufacturer of our choice * TPMS tyre pressure monitoring system per ECE R 141 * Data transmission to the tractor unit via standardized EBS interface according to ISO 11992 * The tractor unit must be able to transmit and display this data correctly Brake system: * Brake system according to EU regulations with EBS-E (4S3M), without connectors to the tractor Steel structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Entire steel construction automatically shot-blasted after welding using a turbine blasting machine * Second blasting treatment with corundum for optimal adhesion of the coating system * HRM metalizing of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection * Topcoat with 2 coats of 2K paint, single-colour in RAL 3002 carmine red as per RAL System 841GL * Rims in silver * Rear section metalized and painted in RAL 9010 (pure white) * Metallic paint not available * Paint structure tested in salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Electrical system: * Electrical system in line with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicators * ASPÖCK-UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin connection according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Included accessories: * 2" kingpin * One spare wheel holder in front of the bulkhead * Yellow-red air couplings on the galvanized front connection terminal * Galvanized folding supports under the load area's slope * One galvanized steel bulkhead (EN12642-XL), approx. 1,600 mm high * On the gooseneck, removable ALU side and rear walls, approx. 2,440 x 400 mm (L x H) * The rear galvanized stake pockets are removable (body length approx. 2,560 mm) * Support block with 1 pair WADER container pockets. Saddle load approx. 20,000 kg * 7 pairs WADER container pockets for 1x 20' container in the load area * 1x 40' container in the load area, 1x 40' container over the gooseneck, 2x 20' containers * 7 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the load area * One galvanized transverse bracket under

Stanje: novo, največja dovoljena obremenitev: 36.360 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Neck (Gooseneck): * Gooseneck with front corners tapered approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading area with rear bevel approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square profile climbing strips approx. 15 x 15 mm as well as lower-width extensions * Between the first and second axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (approx. 670 mm wide) – max. point load 5 t/each * Recess in the bevel as well as projecting into the loading area for excavator dipper stick accommodation (approx. 2,900 x 750 x 210/290 mm [L x W x H]) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) * Cutouts in the outer frame of the loading area for fastening ratchet straps (LC 2,000 daN) Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm hardwood covering * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: 40,000 kg Giedpfoyhkq Ujx Adger Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Tyres: * Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Braking system: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection * Final painting with 2 coats of 2-component topcoat, single-colour in RAL 3002 Carmine Red, according to the RAL 841GL system * Rims in silver grey Including the following additional equipment: * 2" kingpin * Galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Rear electro-hydraulic unit, under the loading area * On the gooseneck, aluminium side and rear plug-in walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the tapered gooseneck * 2 pairs of WADER container pockets in the loading area for one 20' or 30' container * 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * 3 additional pairs of removable, galvanized covers over the wheel recess – max. point load 3.5 t/pc * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional, hang-in intermediate table, approx. 300 mm wide * Interm

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full selection of vehicles available for immediate or short-term delivery on our website. Extract from the equipment list. Complete equipment details available on request. Gooseneck: * Gooseneck with beveled corners at the front approx. 45°, and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of lashing rings, foldable outward (LC 5,000 daN) * 2 pairs of lashing rings, foldable outward (LC 10,000 daN) * 1 pair of lashing rings, foldable inward at the central beam front (LC 10,000 daN) * Cutouts in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating floor C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate covering Two-part Steel Ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with grating floor C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp segments * Hydraulic lifting device, hydraulically movable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated by reversing gear or manually * Air suspension with lift and lower valve Braking System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Tyres: * Tyres 235/75 R 17.5 3PMSF. Brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paintwork with 2 coats of 2-component topcoat, solid color in RAL 3002 Carmine Red, according to RAL system 841GL * Rims in silver grey Included Accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * Grating floor on gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating floor on platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Electric-hydraulic power pack underneath the rear of the platform * On the gooseneck, aluminum side panels and rear panel, plug-in, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) Giedpfx Asyhkrredgsr * One electric winch with radio remote control, approx. 5,400 kg pulling capacity, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for anchoring winch cable on the gooseneck without pulley * One galvanized toolbox, integrated in the beveled gooseneck with an opening for winch passage * Grating floor on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm on the outer frame of the platform * Lift axle on the front axle with TEBS E control based on current axle load and loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full stock of immediately and soon-available vehicles on our website. Selected features listed below. Complete specification available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Gisdpfxjyhkqzo Adgjr Load area: * Load area hydraulically raisable and lowerable after the gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tensioning straps (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checkered plate surface above the axles Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections. Hydraulic lifting system, hydraulically extendable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout, activated by reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Tyres: * 235/75 R 17.5 3PMSF – Brand of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Wheels in silver-grey Included equipment: * 2" kingpin * One galvanized steel front wall, approx. 400 mm high * Grating surface in the gooseneck’s chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the load area’s chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Sand coating applied as slip protection to the checkered plates above the kingpin and loading area * Electro-hydraulic power unit under the rear of the load area * On the gooseneck: removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The galvanized rear stakes are removable. (Body length approx. 2,560 mm) * One electric cable winch with radio remote control, approx. 5,400 kg line pull, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for guiding the winch cable on the neck without a deflection roller * One galvanized toolbox integrated into the chamfered gooseneck, with opening for winch * Grating surface on gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for approx. 100 x 50 mm slip-in stakes in the outer frame of the loading area * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition * 7 pairs of... [Text truncated - please provide remaining content for further translation if needed.]

Stanje: rabljeno, največja dovoljena obremenitev: 39.780 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, naslednji pregled (TÜV): 01/2027, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from equipment. Full equipment list available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Platform: * Extendable loading platform * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN) * Hardwood floor approx. 48 mm thick, over axles with chequer plate flooring Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: * Tyres 205/65 R 17.5 twin-mounted Axles: * BPW axles, two rigid axles, two steering trailing axles, air suspension, drum brake with raise/lower function * Steering trailing axles equipped with electro-magnetic reverse lock, activated by reverse gear or manually Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M) without connections to the tractor unit Steel Construction: Gisdpfxsx Uvlrj Adgsr * Steel construction made of high-tensile fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame, provided by a two-component zinc-rich primer * High-quality, single-color two-component top coat in RAL 3002 Carmine Red * Rear section metallized and painted RAL 9010 (Pure White) * Wheels in silver Electrical System: * Electrical system in accordance with EU regulations Lighting: * 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Included Accessories: * 2" kingpin * Galvanized steel front wall, approx. 400 mm high * Spare wheel carrier in front of the front wall * Yellow-red air couplings on the galvanized front connection panel * 4 wheel chocks with holders on the front wall * Provision at rear of gooseneck for ALU loading ramps * Galvanized folding supports under the sloped section of the platform * Holder for a warning beacon at the rear of the trailer * Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer * Mountings for warning boards left and right on the gooseneck and rear panel, including power socket * One mudflap at the rear of the trailer * Manual and description on USB stick * European reflective signs (red-yellow) at the rear of the trailer * 80 km/h speed stickers at the rear and on both sides * Acoustic reverse warning signal * Load gauge for determining axle loads, including load diagram