Polpriklopnik z nizko nakladalno ploščadjo

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Planenaufbau

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Partial equipment listing. Full equipment details available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Two-part steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism * Maximum load per pair: 30,000 kg Landing legs: * JOST landing gears (manual) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle Bsdpoy Auhuefx Amtswn * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated via reverse gear and manually * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations with EBS-E (2S2M) without connectors to the tractor unit Steel structure: * Steel construction made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final coating with 2 layers of two-component topcoat, single colour in RAL 3002 carmine red, in accordance with RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Wheels in silver Including accessories: * One bracket for warning signs on both sides at the gooseneck and at the rear, including socket * 1 spare wheel holder under the loading area on the right-hand side * 2" kingpin * Galvanized steel front wall * Yellow-red air couplings on the galvanized connector strip at the front * 4 wheel chocks with holders on the front wall * 3 height-adjustable wooden planks * Galvanized folding supports under the loading area bevel * Bracket for a rotating beacon at the rear of the trailer * Height-adjustable tarpaulin frame (approx. 3,960 mm) * Galvanized front wall with tensioning mechanism for sliding curtains, height-adjustable by approx. 400 mm * EDSCHA roof, forward-sliding, on aluminium roof beam profiles (bolted with front and rear wall) * 3 pairs of sliding stakes in the loading area * Superstructure can be hydraulically widened at the rear to left and right by approx. 750 mm * Sliding roof with liftable portal carrier * Sliding tarpaulin with approx. 700 mm slack in length, with tensioning straps spaced approx. 600 mm

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 27.000 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 235/75 R17.5, barva: siv, obratovalna teža: 11.000 kg, Oprema: ABS, Chassis: - Welded steel frame construction with front and rear frame cranks and a lowered bed without rear chamfer - Neck and kingpin plate 225 mm - Lowered bed rated for 25 t point load over 5 m - Outer frame closed to the outside with welded-on lashing rings for securing - Interchangeable 2" king pin - Rear hook-in rail for aluminum ramps Axles and Tyres: - BPW low-loader axles, each with a 10 t axle load, air bellows diameter 360 mm - Air suspension with lifting and lowering function, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights +100 mm - S-cam brakes 300/200 mm, asbestos-free brake pads - Automatic slack adjusters - IVTM tyre pressure monitoring - 9 tyres 235/75 R 17.5, tubeless Steering: - 1st and 2nd axles hydraulically forced steered via fifth wheel coupling Floor: - Multi-layer bonded board floor, 27 mm thick, flush with outer frame and longitudinal beams - Underside reinforced with GRP coating - 12 pairs of lashing rings welded in outer frame (8 pairs RUD 8 t – 6 pairs in the lowered bed as well as one pair each on the gooseneck and at the front of the rear aggregate – 2 pairs of 4 t lashing rings on gooseneck and rear aggregate) - 6 pairs of mushroom anchors in outer frame in the lowered bed - Storage box with lid in the lowered bed floor, front left and right Front Wall: - 25 mm aluminum hollow profiles raised up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding Tarpaulins: - Tarpaulin curtains on both sides with integrated vertical and horizontal belts (approx. 600 mm spacing) and stainless steel tension locks - Adjustable tarp straps (overcentre) up to loading width 4,000 mm including tarpaulin extension with press studs and Velcro fastener - Tarp extension in driving direction: 300 mm, in height: 750 mm - Incl. eyelets for separate tarpaulin extension piece - 1 pair of vertical tarpaulin pockets approx. 1,000 mm long, positioned in the lowered bed at the front crank - With belt pockets Rear Wall: - Steel rear portal frame with side tarpaulin hook-in device - Aluminum double-wing door, 25 mm thick - Both door wings fully foldable with door holders - Each door wing with aluminum double-joint hinge and two recessed grip hollows Front Corner Posts: - Roof height, bolted to front side Central Posts: - 3 pairs of infinitely adjustable folding posts - Posts are movable along the entire length via trolley - Middle posts in the lowered bed also fixable at the rear platform Roof: - EDSCHA sliding roof (galvanized) with cross beams movable in both directions (stacked forward inside the cargo area) - Rear portal cross beam swivels away - PVC tarpaulin roof without customs closure - Manually operated hydraulic lifting roof on both sides, lift 450 mm - Movable lifting roof in positions front (9x50) and rear (9x50), can be driven at increased height - Including tarpaulin extension and apron at rear - Roof can be cranked out 900 mm at front wall Accessories: Bedeiu Eu Nopfx Amtswn - Extendable warning signs (removable at front and rear, with socket) incl. position lights up to loading width 4,000 mm - Storage for 4 warning signs on inside of front wall, top right and left - 1 aluminum ladder with holder 2,500 mm long on front wall - 2 rows of self-securing aluminum slats - Metal mudguards with splash flaps - 1 overnight parking plate and 1 ADR plate on rear wall - BEKAMAX central lubrication system with pump and grease class 2 for approx. 35 lubrication points - Electrohydraul

Stanje: novo, največja dovoljena obremenitev: 38.100 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5 3PMSF, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of fold-out lashing rings 3 pairs of fold-out lashing rings 1 pair of horizontal lashing rings at the front of the loading area Cut-outs in the outer frame of the loading surface for hooking in tension belts Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing legs: JOST landing legs with 2-speed gears for a 24 t lifting capacity Axles and tyres: BPW axles, two axles are fixed, two axles are self-steering, air-suspended, with drum brakes, with lift/lower function The self-steering axles come with an electro-magnetic reverse lock, which is activated via reverse gear or manually Axle toolkit Tyres: 205/65 R17.5 3PMSF Brake system: WABCO brake system according to EU regulations with EBS-E Bwsdotphtmopfx Amten Steel construction: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK lighting ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component zinc dust primer High-quality single-colour 2-component top coat in MB 7350 Novagrau No metallic paint possible Rear section metallized and painted in RAL 9010 Accessories included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system acc. to ECE R 141 At the galvanized front connection strip yellow-red air couplings 4 wheel chocks with holder on front wall Bracket at rear of gooseneck for ALU access ramps Galvanized folding supports under the chamfer of the loading surface Mount for a revolving beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tension mechanism for the sliding curtains Height-adjustable by approx. 400 mm "EDSCHA" brand roof, sliding forward on ALU roof beam profiles, bolted to the front and rear wall In the loading surface, 3 pairs of sliding stakes Superstructure at rear hydraulically extendable to left and right by approx. 750 mm Sliding roof with upward swinging portal carrier Sliding tarp with 700 mm reserve length, with tension straps at intervals of approx. 600 mm Height to top edge of superstructure approx. 3,960 mm Journeys with the sliding roof open are not permitted and will damage the tarp Mounting rail for ALU access ramps at the rear of the vehicle At the gooseneck and at the rear panel left and right, each with a mount for warning signs incl. socket A mud flap at the rear of the trailer European reflector plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading area Lifting axle on the front axle controlled by TEBS E depending on current axle load and load status Rear structure with closed ALU double-wing doors A sanded, anti-slip paint layer on the checker plates on the gooseneck and on the loading surface BEKAMAX centralized lubrication system with standard grease NLGI-2 and a removable guard around the pump Speed stickers 80 km/h on rear and both sides Load manometer for axle load determination including load chart

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2009, Faymonville STBZ-3VA. Baujahr: 2009. 10-Tonnen-SAF-Achsen. Eigengewicht: 16.000 - 16.500 kg. Maximales Gesamtgewicht: 60.000 kg. Sattellast: 30.000 kg. Hydraulik arbeitet auf NATO-System. Aluminium-Bordwände + Werkzeugkiste am Schwanenhals. Hydraulisch abnehmbarer Schwanenhals. 6 m ausziehbar. 2 x 25 cm verbreiterbar. Luftfederung. Baggerbrücke: 4300 x 950 mm. Verzinkt. Abmessungen: Schwanenhals: L: 4.500 mm B: 2.500 mm H: 1.850 mm Sattelhöhe: 1.300 mm Ladefläche: L: 8.000 mm B: 2.750 mm H: 500 mm Ladebodenstärke: 300 mm Heck: L: 4.300 mm B: 2.750 mm H: 950 mm Bereifung: 235/75 R17,5, 80% Profil. Dolly D-1. Bodpfx Asy I Avqomtewn Baujahr: 2008. Erstzulassung: 2009. 10-Tonnen-BPW-Achse. Leergewicht: 2.400-2.600 kg. Maximales Gesamtgewicht: 28.000 kg. Sattellast: 18.000 kg. Bereifung: 235/75R17,5, 80% Profil. Deutscher Auflieger! 2 Stück verfügbar! ID-Nr.: 631. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Anzeigen, Angebote und Offerten der Firma Heinhuis, für sämtliche mit der Firma Heinhuis geschlossenen Verträge sowie für die ihnen vorangegangenen Verhandlungen. Durch jegliche Form der Reaktion akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen der Firma Heinhuis und erklären, dass Sie von diesen Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2009 Leergewicht: 16.000 kg Zuladung: 44.000 kg zul. Gesamtgewicht: 60.000 kg Aufbau ausziehbar: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: novo, številka stroja/vozila: d24246f092ae53c0e155d19dd, lastna masa: 2.400 kg, največja dovoljena obremenitev: 13.600 kg, skupna masa: 16.000 kg, Further information Chassis: Tandem trailer Steel welded construction with approximately 152 mm high floor assembly, load-oriented and torsion-resistant steel frame design. Longitudinal floor frame with a load-resistant outer frame and guiding tunnel spaced at 600 mm intervals, tunnel with top and side alignment guides, tunnel height approx. 45 mm. Four container corner castings suitable for 20ft interchange units. 4 Jumbo support legs for parking height of 970 mm, laterally extendable and can be folded by 90°, with short safety struts and locking device, frame-mounted pin lock and robust drop latch as secondary transit locking system, symmetrical arrangement of the support legs—Type A2 for CWB C 745/782 for parking height approx. 970 mm. Bwjdpfx Ajkt Ni Ujmten Reinforcement between support feet. 7 pairs of recessed lashing rings in the outer frame, each rated for 2.5 tonnes. Heavy-duty pallet stops on both sides, approx. 20-25 mm high, lash points every 200 mm, loading height reduced by approx. 20-25 mm. Side door retainers. Rear underrun protection made from flat steel. Floor Anti-slip phenolic plywood, approx. 27 or 30 mm thick (at manufacturer's discretion), designed for high point loads, suitable for forklift axle loads up to max. 4400 kg. Front wall/corner stanchions Front stanchions 2,800 mm high, remainder closed with tarpaulin, steel corner stanchions in volume design, quick-release system for side curtain at front wall. Centre posts 1 pair of sliding posts, fully adjustable lengthwise, with four latching pockets and an extended pocket at the bottom. Insert slats Three rows of aluminium V-insert slats or wooden slats as per manufacturer’s choice, One extra row of aluminium V-insert slats. Rear wall/rear corner stanchions Rear corner stanchions, steel up to the underside of the roof, tarpaulin hangers with round tube and tension ratchet. Rear portal doors, double-leaf, each door with two internal locking rods. Tarpaulin Tarpaulin with welded horizontal and vertical tension belts. Tension locks made from stainless steel. Roof Sliding curtain roof, rear end-lift foldable, roof can slide from rear to front, L-shaped roof beam suitable for the automotive industry, internal width between roof beams approx. 2,490 mm, tarpaulin colour: white. EcoLift - lifting roof, can be raised by approx. 380 mm, gas strut assisted. Approval / Plaques Country of registration: Germany Manufacturer certificate to EN 12642 XL Paintwork Frame: hot-dip galvanized Front corner stanchions: hot-dip galvanized Front wall: aluminium Rear corner stanchions: hot-dip galvanized Rear wall: white Tarpaulin: RAL 9005 deep black with advertising lettering Note: Images are archive photos.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, skupna masa: 16.000 kg, največja dovoljena obremenitev: 13.380 kg, lastna masa: 2.620 kg, prostornina tovornega prostora: 47 m³, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 7.300 mm, višina nakladalnega prostora: 2.650 mm, prva registracija: 06/2015, številka stroja/vozila: 2011632, Krone Jumbo swap body curtain/Edscha 7.45m - 4 units available Curtain side – sliding tarp Bwsdjwb Erbepfx Amton Smooth, robust rear portal doors, external locking mechanisms Length: 7.45 m – 18 pallet spaces Lashing rings recessed in the floor Additional perforated rail for load securing Wooden slat inserts Support height: 1.12 m Good used condition Delivery with new tarpaulin and new paint possible at extra cost Interior clean and dry Nationwide delivery available! All prices are net plus statutory VAT. Subject to errors and prior sale.

Stanje: novo, konfiguracija osi: 3 osi, Oprema: ABS, Schmitz Varios Lifting Roof, Lift Axle, XL-Certificate, Multilock, LED Reversing Light – FOR RENT All at a glance · First registration: New vehicle · Colour: Black · Unladen weight: 6,680 kg · Tyres: 385/55 R19.5 (Brand: Goodyear) · Note: Immediately available Special equipment Varios two ride heights, LED taillights, lifting roof, lift axle, XL certificate, beverage certificate, 4 rows of aluminium slats, Multilock frame, toolbox, 2 spare wheel holders, fully galvanised frame, 2 wheel chocks, 2x7 + 1x15 pin electrical connection, customs cable. Standard equipment 3-axle, disc brakes, ABS, EBS, raising and lowering valve, reinforced bulkhead, rear access ladder, underrun protection, Edscha roof bar, rear ramp buffers. Errors, typographical errors, and prior sale reserved. Bwedpfx Aeyum Upomten The seller reserves the right to withdraw from the sale. _____ Internal inquiry number: TR26099 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Sales contacts: Mr. Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: WhatsApp also t: @: Mr. Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / WhatsApp also t: -104 @: Mr. Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / WhatsApp also t: -123 @: We speak 13 languages – surely yours as well. Contact us! Homepage: Facebook: Instagram: Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks, and vans. Michael Doblhofer (German, English) p: WhatsApp also t: -102 @: Bastian Wagner (German, English) p: WhatsApp t: -103 @:

Stanje: rabljeno, vrsta goriva: dizel, proizvajalec motorjev: Caterpillar C3.3, Namen uporabe: gradbeništvo Lastna teža: 1.002 kg Bwjdpfxsytxn Eo Amton Moč generatorja: 33 kVA Mere tovornega prostora: 212 x 98 x 152 cm Za več informacij se obrnite na prodajni oddelek.

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 4.638 h, nosilnost: 1.500 kg, dvižna višina: 3.300 mm, vrsta goriva: električni, tip droga: dupleks, gradbena višina: 2.160 mm, stanje pnevmatik: 80 odstotek, velikost sprednje pnevmatike: 18x7-8, velikost zadnje pnevmatike: 140/55-9, lastna masa: 2.943 kg, skupna dolžina: 1.774 mm, barva: drugo, Special equipment: 3rd valve, 4th valve, rear work lights, front work lights, roof cover, full free lift, safety light, non-marking tires, joystick, single-pedal operation, three-wheel drive, seat. Description of special features: single-pedal control, joystick (Duo-Pilot), electric steering, multi-color display, ISM module with RFID access, option button panel, rear floor spot, 5th valve, battery can be regenerated on request (surcharge applies) Description: Inspection and new UVV (accident prevention regulation) compliance. Bedpfx Amjw Ah Rvstjwn