Faymonville Stbz Polpriklopniki nakup rabljenega (219)

Stanje: novo, največja dovoljena obremenitev: 90.700 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.850 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: Hydraulically lift/lower and detachable gooseneck. Length approx. 3,650 mm. Suitable for tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design, fixed hardwood floor approx. 50 mm thick * With drive-over bridge hooks at the front and bolt-lug coupling at the rear Bedpfx Absw Tgp Djrslc * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm, ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical bolt-lug coupling for attaching a lowbed at the front; rear end traverse * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendulum axle 3-axle front bogie: * PENDULUM AXLES, all axles hydro-mechanically forced-steered * Hose rupture valve on axle leveling cylinder with automatic RESET function * Hydraulic cylinders with shutoff taps and locking pins for securing in raised position * Final painting of axles with 2 coats of single color 2K paint, painted in MB7350 Novagrau * Rated axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tires for front bogie: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLES, all axles hydro-mechanically forced-steered * Hose rupture valve on axle leveling cylinder with automatic RESET function * Hydraulic cylinders with shutoff taps and locking pins for securing in raised position * Final painting of axles with 2 coats of single color 2K paint, painted in MB7350 Novagrau * Rated axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tires for rear bogie: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimum corrosion protection * Final painting with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, according to RAL-System 841GL Including accessories: * Steel front wall, approx. 400 mm high * Plug-in aluminum side and rear boards on gooseneck, approx. 400 mm high, anodized * 3.5" kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on gooseneck * Front bogie with separate air connection for air impact wrench * BEKA-MAX central lubrication for one 3-axle bogie * Preparation for bolt-on container positioning for 1 x 20' or 1 x 30' on the outer beams * Without container locks * Brackets on the outer beams for installing foldable extensions * One 7-pin socket left and right, front and rear on rear bogie for warning panels * BEKA-MAX central lubrication for one 5-axle bogie * On the rear bogie, socket for cable remote control for steering * Rear bogie with trough * 2 LED reversing lights mounted on rear panel * European reflector boards (red-yellow) on the rear * One mudflap at rear * One LED beacon with bracket left and right on rear cross-member * Two INOX toolboxes 855 x 340 x 390 mm on gooseneck, left and right * 1-circuit...

Stanje: novo, največja dovoljena obremenitev: 25.645 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Loading Platform: - Low-bed with central beam in extendable design, length approx. 6,750 mm - 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Gooseneck hydraulically lift/lowerable and detachable Rear Running Gear: - Rear running gear in short version with closed outer frame and tread plate cover - Running gear with excavator trough, trough rear half enclosed for housing air tanks - 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the running gear (LC 10,000 daN) Axles: - BPW axles, hydromechanically forced steering - Air suspension with lifting and lowering valve Blsdpfx Abexf Siljrec Tyres: - Tyres 245/70 R 17.5 3PMSF - TPMS: tyre pressure monitoring system as per ECE R 141 Brake System: - Wabco braking system in compliance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality 2-component (2K) top coat, single colour RAL 3000 flame red Includes the following additional equipment: - 2 king pins - One galvanised steel front wall, approx. 400 mm high - Remote steering adjustment from front and rear via cable remote control with pushbuttons, including single-track axle alignment (without installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including axle load diagram - On the gooseneck, aluminium side boards and rear wall, plug-in type, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Upper body length approx. 2,560 mm) - Separate air connection with blow gun on the gooseneck - 2 work lights with switch on the trailer, mounted on left and right sides of the gooseneck platform - One INOX toolbox, approx. 1,350 x 400 x 400 mm, mounted on the gooseneck - 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform, 2 pairs in the rear frame of the running gear - Galvanised, extendable load width extensions approx. 230 mm per side - Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings. No guarantee on seals. - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 with removable pump protection - 2 pairs of WADER container pockets in the loading platform, for 1x 20’ container - One removable galvanised intermediate platform with 1 pair of WADER container pockets - 1 pair of steel ramps to bridge over the low-bed’s loading hooks - Loading platform with painted sand layer as anti-slip protection - HRM metallization (High Resistance Metallization)

Stanje: novo, največja dovoljena obremenitev: 30.190 kg, skupna masa: 43.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Sample of equipment included. Full equipment list available on request. Loading platform: * Low-bed with external beams, extendable in SUPER LOW design, length approx. 6,850 mm * Low-bed with fixed hardwood floor approx. 40 mm thick and mechanical locking mechanism * Supply lines are routed protected within the extendable beams and automatically adapt to the respective low-bed length * 5 pairs of lashing rings, outward-folding (LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: * Gooseneck in SNT design to optimize loading platform length, approx. 3,750 mm * Gooseneck hydraulically lift/lowerable and detachable * Technical fifth-wheel load: 23,000 kg * For tractor units: 4x2, 6x2 Rear assembly: * Rear assembly in short version, with closed external frame and checker plate cover * Assembly with excavator trough, closed at the rear for accommodation of air tanks * 2 pairs of outward-folding lashing rings (LC 5,000 daN) * 1 pair of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings, fitted at front & rear of the assembly (LC 10,000 daN) Axles: * BPW axles, hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Bsdpfxsxarl Ns Abrslc Tyres: * Tyres 245/70 R 17.5 3PMSF * Make of our choice * Load index (146/146F) * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to the towing vehicle via standardized EBS interface as per ISO 11992 * For correct display, the towing vehicle must be capable of transmitting and showing this data Brake system: * Brake system in accordance with EU regulations with EBS-E (2S2M) Electrical system: * Electrical system as per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash together with turn signals * ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin connection as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: * Steel structure made of high-strength, fine-grained steels * Steel grades: * S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting: * Complete steel structure shot-blasted automatically with blast wheel machine after welding * Second blasting with corundum for optimal coating adhesion * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection * Top coating in 2 coats of 2K topcoat, single color in RAL 3002 carmine red, according to RAL System 841GL * Rims in silver * Rear section metallized and painted in RAL 9010 (pure white) * Metallic finishes not possible * Paint system tested according to salt spray test ISO 9227-NSS * Cavities sealed with special wax Including the following additional equipment: * 2-inch king pin * A galvanized steel front wall, approx. 400 mm high * Remote steering front and rear via cable remote control with push buttons, including axle tracking control (without installation on the tractor unit) * Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings * Electro-hydraulic unit * Prepared for the installation of bolted container positioning devices for 1x 20' or 1x 40' container on t

Stanje: rabljeno, konfiguracija osi: 3 osi, skupna dolžina: 14.000 mm, skupna višina: 3.500 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, stanje pnevmatik: 25 odstotek, Dimenzija pnevmatik: 235/75R17.5 Profil pnevmatike: 25% Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje = Podatki o podjetju = Pri povpraševanju vedno navedite številko zaloge (8 številk) Pri Smz Smeets & Zonen : - na trgu od leta 1976, že 65.000 prodanih/1700 letno/1000 na zalogi - Popolna storitev od A do Ž, pomoč pri transportu/organiziramo izvozna tablice (za doplačilo!) - Servis za natovarjanje na najcenejši prevoz po svetu Bljdpfx Ajxrhk Sobrsc Veliko skladišče za vse nove in rabljene dele: Vedno oglašujemo z našimi najboljšimi cenami Obiščite nas za celotno zalogo in informacije Pričakujemo vas na 130.000m2 zemljišča z 20.000m2 skladišča in popolnoma opremljeno delavnico. Oglejte si naš video

Stanje: rabljeno, lastna masa: 10.650 kg, največja dovoljena obremenitev: 40.310 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, Leto izdelave: 2024, obratovalna teža: 10.650 kg, Oprema: ABS, For every used semi-trailer, you receive a current and complete inspection and functional report. Gooseneck: - Gooseneck with 30 mm thick hardwood flooring - Rear section of gooseneck straight design - 3 pairs of lashing rings (LC 5,000 daN) Loading area: - Extendable loading area design - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flush-mounted lashing rings at the front of the loading area (LC 10,000 daN) - Cutouts in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, with checker plate flooring over the axles Axles and Tyres: - BPW axles, two fixed and two self-steering axles - Air suspension, drum brakes, with raise/lower function - Self-steering axles with electro-magnetic reverse lock, activatable via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Bsdpexfa E Uefx Abrelc Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat finish, single color, in Nova Grey Accessories included: - Spare wheel holder in front of the front wall - 2" king pin - Galvanized steel front wall, approx. 400 mm high - On the galvanized connector bar at the front, yellow-red air couplings - 4 wheel chocks with holders at the front wall - Galvanized folding supports under the loading area slope - Bracket for a revolving beacon at the rear of the trailer - Extendable galvanized side extensions, approx. 230 mm per side - White reflective tape on the sides in accordance with EU regulations, at extension and red at the rear - Mounts for warning boards on both sides of the gooseneck and rear apron, including socket - Rear mudflap - European reflective signs (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - Plug-in ALU side and rear walls on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized plug-in stanchions are removable (body length approx. 2,560 mm) - 7 pairs of WADER container pockets: 1x 20ft container on the loading area; 1x 40ft container on the loading area; 1x 40ft container over the gooseneck; 2x 20ft container - 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading area - Lift axle on the front axle with TEBS E control depending on current axle load and load condition - Movable hanging rail for ALU loading ramps at the rear of the vehicle - Sanded anti-slip coating painted on checker plates on the gooseneck and loading platform - Four approx. 400 mm extendable warning boards, approx. 423 x 423 mm, with position light - Mount for beacon on warning boards - 80 km/h speed stickers on the rear and both sides - Load gauge for axle load determination, including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces hot galvanized with ZINACOR 850 metallization (zinc 85%, aluminium 15%)

Stanje: rabljeno, največja dovoljena obremenitev: 36.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, naslednji pregled (TÜV): 06/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available for immediate delivery or at short notice, can be found on our website. Extract from the specification. Full equipment details available upon request. Loading area: * Gooseneck, length approx. 4,100 mm, with central beam * Loading area manufactured as a double extension version, length approx. 9,400 mm, with pneumatically operated locking mechanism * A welded intermediate table, approx. 200 mm wide, is permanently attached to the central beam * Supply lines are protected within the extendable beams and automatically adjust to the respective loading area length (exception: supply of the first locking mechanism) * For tractors: 4 x 2 and 6 x 2 Axles and suspension: * BPW axles and suspension; all axles are hydro-mechanically force-steered and installed on turntables * Technical air suspension with lift and lowering valve Tyres: * 235/75 R 17.5 3PMSF dual tires * Make of our choice. Load index 143/141J (144/144F) Braking system: * Braking system by WABCO EBS-E, compliant with EU regulations Metallisation: * Complete HRM metallisation (High Resistance Metallisation) * Entire steel structure shot-blasted, then hot finished with ZINACOR 850 (Zinc 85% – Aluminium 15%) Paintwork: * 6-stage final treatment: the entire steel structure is shot-blasted after welding. One layer of zinc-based primer, one layer of adhesion primer. Final coating applied with two layers of 2-component (acrylic) paint, single colour, followed by cavity sealing with special wax * Trailer colour: RAL 3002 Carmine Red * Rim colour: Silver grey * Lamp panel colour: RAL 9010 Pure White Accessories included: * Steel front wall, approx. 1,600 mm high, certified version according to EN12642:2016 XL. Maximum load capacity: 20,000 daN * 4 pairs of recessed lashing rings in the external frame of the gooseneck: the 3 front pairs of lashing rings are lying flat (LC 10,000 daN), the rear pair is foldable outwards (LC 10,000 daN) * 4 pairs of stake pockets set into the outer frame of the gooseneck for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket rail mounted at the rear of the gooseneck loading floor for insertable stakes approx. 100 x 50 mm * 2-inch king pin Bodpfxjw E A Egs Abrslc * 4 wheel chocks with brackets in front of the front wall * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B, static tested load approx. 50,000 kg * On the gooseneck and loading area, approx. 32 mm wooden floor enclosed in aluminium omega profiles * On the large cross-section extension tube, a locking position every approx. 500 mm * On the small cross-section extension tube, a locking position every approx. 1,000 mm. Therefore, a locking option every approx. 500 mm is achieved * 10 pairs of recessed flat lashing rings in the outer frame of the loading area, foldable outwards: one pair before the last axle and one at the rear crossmember of the trailer (LC 10,000 daN each), all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets set into the outer frame of the loading area for insertable stakes approx. 100 x 50 mm * 3 transverse stake pocket rails mounted in the loading floor of the loading area for insertable stakes approx. 100 x 50 mm * 1 spare wheel holder under the loading area on the right in the direction of travel * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading area on the left in the direction of travel * Access ladder mounted on the right in the direction of tra

Stanje: novo, skupna masa: 80.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Other vehicles available under . Summary of features. Complete specification on request. NECK/SCHWANENHALS Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear tapers approx. 1,000 mm x 10°. For tractor units: 4 x 2, 6 x 2 and 6 x 4. - Front wall made of steel, plug-in, approx. 400 mm high - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches - Outer side members of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) - 1 pair of plug-in side aluminum side walls on the gooseneck, approx. 400 mm high, anodized - 1 plug-in aluminum rear wall on the gooseneck, approx. 400 mm high, anodized - Gooseneck surface with approx. 40 mm hardwood flooring, over king pin with checker plate - 3.5 inch king pin - Gooseneck guidance plate for fifth wheel plate, approx. 500 mm wide - Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917) - 2 pairs of lashing rings with retaining springs, suspended on the outside of the gooseneck (LC 5,000 daN) LOADING PLATFORM Loading platform in extendable version, approx. 8,800 mm in length with rear taper approx. 500 mm x 10°. Pneumatic locking with conical locking pin and reinforced locking positions; supply lines run protected inside the extendable beams and automatically adjust to the platform length. - BPW axles and suspension, 1st axle steering, all other axles hydro-mechanical forced steering. 1st axle with electromagnetic reverse lock via reverse gear and manual activation. Technical axle load: 12,000 kg each - Air suspension with lift/lower valve - 235/75 R 17.5 3PMSF twin tyres - brand of our choice - Mechanical landing legs with 2-speed gearbox and crank handle, JOST Modul B - static test load = 50,000 kg - Continuous and between axles interrupted approx. 50 mm thick hardwood flooring (increases coefficient of friction) - Long holes for attachable and repositionable bridging elements: - at the front of the loading platform - 1 movable intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. - At front and rear with long holes for attachable and repositionable bridging elements - 1 pair of lashing rings on the front cross member (LC 10,000 daN) - 7 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN) - Galvanized, extendable widenings of approx. 230 mm per side (without wooden planks) - 1 pair of mechanical rear supports - Remote steering from the front and rear via cable remote control, with tracking control for the axles, no installation required in tractor unit - TPMS tire pressure monitoring sensors installed in all wheels - Securing of the platform with conically welded locking profiles every 500 mm - Lock monitoring left and right on the trailer - For the intermediate table, approx. 300 mm wide, a mechanical lock for securing the intermediate table on the sliding extension - 5 pairs of threaded blocks on the extendable beam for mounting bolted rings M20 (LC 5,000 daN) BRAKE SYSTEM Brake system Bedoxarmajpfx Abrolc

Stanje: rabljeno, največja dovoljena obremenitev: 42.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2006, naslednji pregled (TÜV): 02/2026, Oprema: ABS, Unseren kompletten Fahrzeugbestand mit sofort und kurzfristig verfügbaren Fahrzeugen finden Sie auf unserer Website. Auszug aus der Ausstattung. Komplette Ausstattung auf Anfrage. BPW-Achsen mit Trommelbremsen, luftgefedert, mit Heb- und Senkventil. Auswechselbarer 3,5 Zoll Königszapfen. Ausziehbare Ladefläche mit halbautomatischer, pneumatisch betätigter Arretierung. Ladefläche hydraulisch heb- und senkbar. Zwei klappbare, zweiteilige Auffahrrampen (ca. 2.950 + 1.650 x 850 mm) mit Hartholzbelag. Wabco Bremsanlage ABS/ABV. Stirnwand aus Stahl, feststehend, in abgeschrägter Ausführung, ca. 400 mm hoch. Fahrwerk mit durchgehender Vertiefung (Baggermulde, ca. 950 x 250/330 mm), zur Aufnahme des Löffelstiels. Schlusstraverse geschlossen. Schwanenhals hydraulisch heb- und senkbar, ca. mm. Im Kundenauftrag zu verkaufen. Bodpfx Asxagghjbrslc

Stanje: novo, največja dovoljena obremenitev: 25.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment specification. Full specification available upon request. Gooseneck * Gooseneck in SNT design to optimize loading area length * Length approx. 3,750 mm, hydraulically lift-/lowerable, as well as detachable * Technical fifth-wheel load: 25,000 kg For tractors: 4 x 2 and 6 x 2 Kessel bridge * Low bed designed as telescopic Kessel bridge SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * Supply lines are routed protectively within the telescopic beams and automatically adjust to the respective low bed length Rear chassis * Short version with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twinned. Load index 143/141J (146/146F) Brake system * WABCO brand, EBS-E according to EU regulations, WITHOUT connection cable to tractor unit Paintwork * 6-coat final treatment Bedpfx Abev Sw E Aorjlc * Complete steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 layers of 2K (acrylic) paint, single colour, then cavity sealing with special wax Trailer colour * RAL 3002 Carmine red * Rim colour: silver-grey * Side wall colour: Aluminium-natural Accessories included * Steel front wall, plug-in, approx. 400 mm high * 3 kW electro-hydraulic pump unit for hydraulic operation, except for hydraulic winches. Without installation of supply connectors at the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck front wall * Outer beams of the gooseneck with mounting holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2 inch kingpin * Hydraulic traverse for supporting the gooseneck on the tractor or a dolly * Air connection with air pistol on the gooseneck * 1 pair of steel ramps with climbing cleats and retaining bolts to bridge the low bed attachment hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * At the outer beams of the loading area, prepared for removable loading floor * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the inside outer beams of the loading area * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the outermost beams of the loading area (LC 10,000 daN) * Cut-outs over the lashing rings on the upper flange of the outer beams * Mechanical pin-lug coupling from the low bed to the running gear, for changing the loading area or installing extension beams. With electro-pneumatic-hydraulic couplings * Outer beams of the low bed with painted-on sand layer for anti-slip protection * 2nd driving height for upper drive position, max. ± 50 mm from the normal driving position, without installation of controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from low bed to excavator recess (LC 10,000 daN) * Front and rear chamfered edge

Stanje: rabljeno, Leto izdelave: 2020, Maxtrailer F-S43-1AAF Baujahr: 2020 SAF-Achsen, 10,5 t Max. Gesamtgewicht: 49.500 kg Sattellast: 18.000 kg Bodpjxyydyofx Abrolc Hydraulik des Trailers kompatibel mit NATO-Anschluss EBA, ABS, ALB Werkzeugkasten am Schwanenhals Hydraulische Überfahrbrücke vom Boden zum Schwanenhals Länge: 2.800 mm 2 x 25 cm verbreiterbar Luftfederung 3. Achse ist eine Nachlauflenkachse Hydraulische Rampen (Hydraulik von links nach rechts) Länge: 4.100 mm Abmessungen: Schwanenhals: L: 3.450 mm B: 2.550 mm H: 1.470 mm Sattelhöhe: 1.250 mm Ladeboden: L: 9.300 mm B: 2.550 mm H: 900 mm Bereifung: 235/75R17,5, 80% Profil ID-Nr.: 549 Die Allgemeinen Geschäftsbedingungen von Heinhuis gelten für sämtliche Inserate, Angebote und Kostenvoranschläge der Firma Heinhuis, alle mit Heinhuis geschlossenen Verträge sowie die diesen Verträgen vorausgehenden Verhandlungen. Durch jegliche Reaktion erkennen Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis an und erklären, diese zur Kenntnis genommen zu haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2020 zulässiges Gesamtgewicht: 49.500 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, lastna masa: 11.900 kg, največja dovoljena obremenitev: 39.060 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, skupna dolžina: 13.100 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functional report. Gooseneck: - Gooseneck with 30 mm thick hardwood flooring - Gooseneck rear section designed straight - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading platform: - Loading area designed with extension capability - 5 pairs of folding lashing rings to the outside (LC 5,000 daN) - 3 pairs of folding lashing rings to the outside (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attachment of tensioning straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with checker plate surface above the axles Two-part steel ramps: Bjdpfx Abexwnfmsrslc - One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood surface - Ramps with hydraulically foldable sections, hydraulic lift system, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles and tires: - BPW axles; two fixed axles, two self-steering axles - Air suspension, drum brakes, with lifting/lowering function - Self-steering axles equipped with electromagnetic reverse lock, activated via reverse gear or manually - Axle tools - Tires 205/65 R17.5 - TPMS (Tire Pressure Monitoring System) compliant with ECE R 141 Accessories included: - One spare wheel with carrier in front of the bulkhead - 2" kingpin - One galvanized steel front wall, approx. 400 mm in height - Yellow-red air couplings at the galvanized connection strip at the front - 4 wheel chocks with holders at the bulkhead - Galvanized folding supports under the loading platform slope - Bracket for beacon at the rear of the trailer - Zinc-plated, extendable wideners: approx. 230 mm per side - White reflective tape to EU regulations on the sides, extension and red to the rear - Mounting brackets for warning boards on both the gooseneck and the rear panel, including socket outlet - One mudflap at the rear of the trailer - European reflector plates (red-yellow) at the rear - Plug-in ALU side and rear walls on the gooseneck, approx. 2,440 x 400 mm - Removable, galvanized rear stanchions. Body length approx. 2,560 mm - 7 pairs of WADER container locks: - 1x 20ft container on loading platform - 1x 40ft container on loading platform - 1x 40ft container above gooseneck - 2x 20ft containers - Support block with 1 pair of WADER container locks (kingpin load approx. 20,000 kg) - 7 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area - Lifting axle on front axle with control via TEBS E, depending on current axle load and load condition - Sliding hanging rail for ALU loading ramps at the rear of the vehicle - Anti-slip painted sand coat on checker plates on gooseneck and loading platform - Four warning panels extendable by approx. 400 mm, approx. 423 x 423 mm, each with a position lamp - Beacon mounting bracket on warning panels - 80 km/h speed stickers at rear and both sides - Load gauge for determining axle loads, including load diagram

Stanje: rabljeno, največja dovoljena obremenitev: 34.400 kg, skupna masa: 57.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2006, skupna širina: 2.750 mm, skupna višina: 3.900 mm, Oprema: ABS, Faymonville nizkopodni priklopnik s 4 osmi, snemljivim S-vratom, izvlečljiv in s 4 vodljivimi osmi Bjdpfx Abewuhm Ierelc Nosilnost: 34.400 kg Tip: STBZ-4WAUB Leto: 2006 - Izvlečljiv do skupne dolžine 26 metrov - Z hidravličnimi rampami - 4 vodljive osi z daljinskim upravljanjem Z veseljem vas podpremo tudi pri financiranju/leasingu z našimi partnerji. Vse informacije so brez garancije. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) Blsdjtvfkfspfx Abrsc - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: novo, lastna masa: 9.500 kg, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, obratovalna teža: 9.500 kg, Oprema: ABS, Loading platform in extendable design: Loading platform with hardwood planks, rear bevel approx. 1,000 mm x 8° 1 pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of fold-out lashing rings on the outside (LC 5,000 daN) 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN) Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Brake system: Brake system as per EU regulations with EBS-E (2S2M) Paintwork: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer High-quality single-colour 2-component (2K) top coat in Nova grey Rear section metallized and painted in RAL 9010 (Pure White) No metallic paint possible Landing gear: JOST mechanical landing gear with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction from high-tensile fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Axles and tyres: BPW axles, air suspension, with disc brakes (377 mm), with lift/lower function Trailing steering axles with electro-magnetic reversing lock, actuated via reverse gear or manually Axle tool Tyres: 435/50 R 19.5 Accessories included: At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets 2" kingpin Galvanized steel front wall approx. 1,600 mm high, EN12642-XL White reflective tape to EU standards on the sides, extension section and red at the rear Loading platform with heavy-duty hardwood floor Bedpfxjk Eamme Abrolc 9 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform 1 spare wheel holder under the platform on the right (direction of travel) Galvanized folding supports under the rear slope of the loading area Sliding mounting rails for ALU loading ramps at the rear of the vehicle European reflective plates (red-yellow) at the rear of the semi-trailer One mudflap at the rear of the semi-trailer Bracket for a rotating beacon at the rear of the semi-trailer At the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket One HDPE toolbox 620x360x610 under the platform on the left (direction of travel) 4 pairs of WADER container locks in the platform for 1x 20ft container or 1x 40ft container; additional locking position in the extension for a 45ft container 3 pairs of transverse stake pocket rails on the platform for 100 x 50 mm plug-in stanchions Lift axle on the front axle with control via TEBS E, depending on current axle load and loading condition Speed stickers 80 km/h on the rear and both sides Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Mounting for rotating beacon on warning boards Load gauge including axle load diagram HRM metallization (High Resistance Metallisation) of the outer frame Complete steel structure shot blasted, then specified visible surfaces metallized

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 35.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 940 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading area: - Loading deck in extendable design - Loading deck with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cut-outs in the loading deck's external frame for attaching tension belts Braking system: - Braking system in accordance with EU regulations, with EBS-E (2S2M) Blodjl Ux Rwspfx Abroc Painting: - First-class, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer - High-quality two-component (2K) top coat in solid Novagrey - Rear section metallised and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST mechanical landing gear with 2-speed gearbox, 24t lifting capacity (test load 50t) Steel construction: - Steel structure made from high-strength fine grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, LED lighting 24 Volt - Sockets: 2x 7-pin & 15-pin Axles and tyres: - BPW axles, air suspended, with disc brakes (377 mm), with lifting/lowering function - Hydro-mechanically forced steering - Axle tools - Twin tyres 235/75 R 17.5 Accessories included: - Yellow-red air couplings at the galvanised front connection bar - 4 wheel chocks with holder - 2" king pin - Galvanised steel headboard approx. 1600 mm high - White reflective tape on the sides, sliding section and rear in red in accordance with EU regulations - Loading deck with heavy-duty hardwood floor - Rear and front steering by cable - Remote control via push buttons, with single-track monitoring of the axles - With wireless remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading deck - Galvanised folding supports under the loading deck bevel - Sliding mounting rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the trailer rear - One mud flap at the trailer rear - Mount for a beacon at the trailer rear - Mounts for warning boards including socket on gooseneck and rear panel, each left and right - Stainless steel toolbox INOX 1,500 x 390 x 810 under the loading deck, right side in driving direction - Central lubrication system BEKAMAX (Pico) with NLHI-2 multipurpose grease and removable protection around pump - 6 pairs of WADER container locks on the loading deck for 1x 20ft, 2x 20ft or 1x 40ft containers, additional locking for one 45ft container in extendable section - 4 pairs of crosswise stake pocket strips mounted in the loading area for 100 x 50 mm plug-in stakes - Lift axle on the first axle, controlled by TEBS, dependent on current axle load and load condition - 80 km/h speed stickers at the rear and on both sides - Four extendable warning boards ca. 400 mm (approx. 423 x 423 mm) with LED position light - Beacon mount on the warning boards - Load gauge for axle load determination, including load diagram - HRM metallisation (High Resistance Metallisation) on the external frame - Complete steel construction shot-blasted, then all defined visible areas metallised with ZINACOR 850 (85% zinc, 15% aluminium) by thermal spraying

Stanje: novo, lastna masa: 11.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.250 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, barva: sivo-črna, Oprema: ABS, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism A fixed intermediate table, approx. 250 mm wide, is mounted on the central beam Blsdpfx Ashlz Shebroc 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Openings in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) Axles and tyres: BPW axles and suspension, all axles with hydro-mechanical forced steering Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tools 6 tyres, size 385/65 R 22.5 Brake system: Brake system according to EU regulations with EBS-E (2S2M) Landing gear: JOST landing legs (mechanically operated) with 2-speed gearbox for 24 t lift load (50 t test load) Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX mounted on the front terminal board with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class, long-lasting corrosion protection of the standard grit-blasted welded frame, guaranteed by a 2-component (2K) zinc-dust primer High-quality, single-colour 2-component (2K) top coat in Novagrau Rear section metallised and painted in RAL 9010 (pure white) No metallic paint finish possible Included accessories: At the gooseneck and at the rear plate, left and right, each with a bracket for warning signs, including socket Remote steering from the front and rear via cable remote control with push buttons, with single-track control of the axles Electro-hydraulic unit 4 wheel chocks with brackets on the front wall 2" kingpin A galvanised steel front wall approx. 2,200 mm high Yellow-red air couplings on the galvanised front terminal board White reflective tape on the side, at the extension and rear in accordance with EU regulations, red at the rear European reflective plates (red-yellow) on the rear of the trailer One mud flap on the rear of the trailer Manual and documentation Bracket for a revolving warning light at the rear of the trailer Loading platform with approx. 30 mm thick wooden floor set in omega profiles 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform on the right-hand side in the driving direction 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; in the extension, an additional locking position is provided for a 45ft container 5 pairs of stake pocket strips, mounted transversely in the loading platform, for plug-in stanchions 100 x 50 mm A galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm) Access ladder mounted on the right in the direction of travel One HDPE toolbox 1,200x500x480 mounted at the front under the loading platform on the left in the direction of travel Lift axle on the front axle with control via TEBS E depending on the current axle load and loading status Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pump Red/white reflective tape on the extension of the loading platform On the central beam,

Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick - Pneumatic locking with conical locking bolts and reinforced lock positions - Hardwood covering on the loading platform bevel Ramps: - 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm - Ramps with hardwood covering - Hydraulically folding ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward - Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - Tyres 235/75 R 17.5, twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS sensors installed in all wheels including spares Accessories included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches - Parking position on gooseneck for warning boards when not in use - 1 spare wheel - On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised - On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised - Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - 4 wheel chocks Bledpfx Abok Aht Usrjc - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extensions (galvanised) extendable by approx. 230 mm per side - Wheel recesses with square climbing cleats - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering at front and rear via cable remote control, with single track monitoring of axles - 1st axle with automatic lift axle function - Central lubrication system with 1 BEKAMAX brand pump - Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring - Wabco Smart Board System - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: Blodpfx Aohlz S Njbrec • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: novo, lastna masa: 10.900 kg, največja dovoljena obremenitev: 37.100 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear bevel approx. 1,000 mm x 6° - Technical king pin load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading platform: - Loading platform, approx. 9,600 mm long with rear taper approx. 900 mm x 6° - Platform area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, with a load capacity of up to approx. 9,000 kg - Grating surface and steel sheet floor approx. 5 mm thick as additional reinforcement on the sloped section of the platform Ramps: - One pair of two-section AXS steel ramps, approx. 4,675 mm long and approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward - Painted sand coating on the outer frame and ramp tips - Flashing lights on the outer sides of the ramp tips with control switch next to the ramp operation panel - Ramp lock in transport position with quick-release fastener Axles, suspension and tires: - BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steerable (trailing) Bljdpjuadk Nefx Abrec - 1st axle with traction assistance - Operated via brake pedal in the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 - TPMS tire pressure sensors installed on all wheels including spare wheels Brake system: - WABCO EBS-E braking system in accordance with EU regulations Paintwork: - Trailer MB 7350 Novagrau Equipment included: - Removable front steel wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations, except for hydraulic winches - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating with 5 mm steel underlay as additional reinforcement - Painted sand coating - Cutouts in the outer frame of loading platform and lift bed for hooking hydraulic ramp control valves on the right-hand side of the vehicle - 2" king pin - Central lubrication system with 1 pump, brand BEKAMAX - 1 pair of plug-in ALU side boards on the gooseneck, approx. 400 mm high, anodised - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Steel wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, lastna masa: 29.600 kg, največja dovoljena obremenitev: 72.400 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.650 mm, širina tovornega prostora: 2.840 mm, višina nakladalnega prostora: 550 mm, velikost pnevmatike: 285/70 R19.5, barva: siv, obratovalna teža: 29.600 kg, Oprema: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-axle front bogie: - Hook mountings at front and rear - Bogie length x width approx. 2,200 mm x 2,850 mm Excavator deck "BB-A": - Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and pin-lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance 4-axle rear bogie: - Mechanical pin-lug coupling for the installation of a lowbed at the front, rear crossmember at the back - Bogie length x width approx. 5,480 mm x 2,850 mm - Multiple lashing points Pendulum axles and tyres (front and rear bogies): - "PENDULUM AXLE", all axles forced-steered via hydromechanics - Hose rupture valve on axle compensation cylinders with automatic RESET function - Hydraulic cylinders with shut-off valves and locking clips for securing in raised position - Final coating on axles: 2 layers of single-colour MB 7350 Novagrau 2K paint - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres size 285/70 R19.5 Remote steering (after-steering): - Remote steering operable from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles - Socket for remote steering control on gooseneck - Cable remote control with pushbuttons and single-track control included Accessories included: - Yellow and red air couplings on the galvanised front connection bar - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at rear of gooseneck for warning boards - Hoisting jib with winch for spare wheel at the front face of the gooseneck - Truck hydraulic connection with flow control (40 l/min), including support jib for supply lines; tractor unit tank must have at least 80 litres capacity with couplings - Plug-in ALU side and rear boards on gooseneck, approx. 400 mm high, anodised - Control lever on gooseneck protected by foldable cover - Separate air connection with air gun on gooseneck - BEKAMAX central lubrication system: 1x on gooseneck, 1x on 2-axle and 1x on 4-axle bogie - Variomax tool kit - Multi-coupling hydraulic connectors on gooseneck and at lowbed hook interface Bodpjwcmhaefx Abrslc - 2 spare wheels - One 7-pin socket left and right, at front and rear of rear bogie for warning boards - Front bogie with separate air connection for impact wrench - Foldable steel bed extensions, adjustable in width from approx. 2,850 mm to 3,250 mm - Steel bed inserts can be placed in 2 positions for sunken load area - Steel mats with rubber flooring, approx. 12 mm thick - Thread-in options (⌀ 40 mm) every approx. 500 mm on the upper flange of the excavator deck outer tube for eye bolts - One locking point at every approx. 500 mm on extension with mechanical lock - Socket on rear bogie for remote steering cable control - 2 reversing lights on rear panel - Four extendable warning boards (by approx. 2,000 mm), each approx. 423 x 423 mm with position lights - 1 work light left + right on rear panel of gooseneck with separate on/off switches - Two INOX toolboxes, approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Radio remote control for after-steering

Stanje: novo, lastna masa: 10.300 kg, največja dovoljena obremenitev: 39.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Loading platform after the gooseneck, hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° - Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with chequer plate covering Two-part Steel Ramps: - One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp parts, hydraulic lifting system, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles, Suspension and Tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tires 235/75 R 17.5 3PMSF - TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories Included: - One spare wheel with holder in front of the bulkhead - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings at the galvanized connection strip in front - 4 wheel chocks - Galvanized folding supports under the platform's rear chamfer - A holder for a rotating beacon at the rear of the trailer Bljdpou Hp Hrefx Abroc - Cover plates to bridge the gap between ramps and platform - White reflective tape as per EU regulations along the sides of the trailer and red at the rear - Electro-hydraulic unit at the rear, under the platform - At the gooseneck and at the ramps left and right, each with a holder for warning signs, including socket - Control valves for the ramps positioned on the right side of the trailer - European reflective plates (red-yellow) at the rear of the trailer - Manual and description on USB stick - Removable ALU side walls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear, galvanized side stakes are removable (body length approx. 2,560 mm) - An electric cable winch with radio remote control, approx. 5,400 kg lifting force, including 9.5 mm steel cable, 24 m long, with guide roller - Bolted 5 t ring for cable deflection of the winch on the gooseneck without pulley - 2 pairs WADER container pockets in the platform for a 20ft container - 6 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the platform - Lift axle on the front axle with control via TEBS E, depending on actual axle load and loading condition - 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings along the central beam at the rear chamfer (LC 10,000 daN) - Sand coating for slip resistance painted on the chequer plates on the gooseneck and on the platform - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protection - Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm - Speed stickers 80 km/h rear and on both sides - Load manometer for determining axle loads including load chart - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces metallized and hot-coated with ZINACOR 850 (zinc 85% - alu 15%)

Stanje: novo, lastna masa: 13.500 kg, največja dovoljena obremenitev: 51.500 kg, skupna masa: 69.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimizing loading platform length, length approx. 3,700 mm Gooseneck rear with chamfering approx. 1,000 mm x 10° Loading Platform: Telescopic loading platform, length approx. 8,800 mm, with rear chamfering approx. 500 mm x 10° Recess in the chamfer as well as into the loading platform to accommodate the excavator dipper stick Pneumatic locking with conical pin and reinforced locking positions Supply lines routed protected within the extendable beam, adapting to the respective platform length Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps individually adjustable hydraulically approx. 235 mm to the outside and approx. 215 mm to the inside Bjdpfxsk Ahugo Abrjlc Axles and Suspension: BPW axles and suspension, two rigid axles, two steering trailing axles Electromagnetic reverse lock, activated via reverse gear and manually Air suspension with lift and lower valve Axle tool Tyres: 235/75 R17.5 3PMSF twin tyres Load index: 143/141J (144/144F) Brake System: WABCO braking system, EBS-E in accordance with EU regulations Lighting System: 24-volt lighting system in "ASPÖCK-NORDIK full LED" Metalizing: Standard HRM metallization of the outer frame Complete steel structure shot-blasted, then visible defined surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) hot-refined Steel Construction: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified as per DIN-EN 287-1 MAG welding process according to EN ISO 4063 Shielding gas M21 as per EN ISO 14175 Accessories Included: Front wall made of steel, plug-in, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin 24N connection per ISO-11852, 24S connection per ISO-3731, 15-pin connection per ISO-12098 Round NATO socket on the front connection strip Cable to supply electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and tractor with connector (NATO-NATO) 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches 1 spare wheel with mounting adapter Outer beam of the gooseneck with fastening holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included One fastening hole in the rear upper area of the gooseneck's outer beam for a screwable lashing ring 1 pair of screw-in lashing rings Approx. 40 mm thick hardwood covering above the gooseneck On the gooseneck, 1 pair of plug-in side aluminium walls, approx. 400 mm high, anodized On the gooseneck, a plug-in aluminium rear wall, approx. 400 mm high, anodized 2" kingpin Gooseneck guide plate for fifth wheel, approx. 500 mm wide 4 wheel chocks with holder Holder for aluminium approach ramps Mechanical landing gear with 2-speed gearbox and crank Continuous hardwood floor approx. 50 mm thick on the loading platform, interrupted between axles Platform locking with conically welded locking profiles every 250 mm incl. tension plate Slotted holes at the front of the loading platform for attachable and adjustable bridging elements 1 intermediate table with recessed platform, approx. 300 mm wide for the draw-out tube with large cross-section, with sheet metal covering Front and rear with slotted holes

Stanje: novo, lastna masa: 14.800 kg, največja dovoljena obremenitev: 61.700 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck with rear chamfer of approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading Platform: • Extendable loading platform with rear chamfer of approx. 500 mm x 8° • 9 pairs of folding external lashing rings • 1 pair of recessed lashing rings at the front of the loading platform • Cutouts in the outer frame of the loading platform for attaching tension belts • Approx. 48 mm thick hardwood flooring, checker plate above the axles Landing Legs: • JOST mechanically operated landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: • BPW axles and suspension, 1st axle steering, 2nd and 3rd axle fixed, 4th and 5th axle follow-steering • Technical axle load: 12,000 kg • 1st, 4th, and 5th axles with electromagnetic reverse lock, activated via reverse gear or manually • Tyres: 235/75 R 17.5 3PMSF Brake System: • WABCO brake system in accordance with EU regulations including EBS-E (4S3M) Paintwork: • Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer • High-quality single-color two-component (2K) topcoat in MB 7350 Novagrau • Rear section metallized and painted in RAL 9010 (Pure White) Steel Construction: • Steel structure made from high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Accessories: • One spare wheel with holder in front of the front wall • 2" king pin • Galvanized steel front wall, approx. 400 mm high • Front galvanized connection strip with yellow-red air couplings • 2 wheel chocks with holders mounted on the front wall • Rear mount on gooseneck for ALU drive-on ramps • Galvanized extendable wideners appx. 230 mm per side • Bracket for a beacon at the rear of the trailer • Galvanized supports under the chamfer of the loading platform • White reflector tape on the sides as per EU regulations, red at the extension and rear • Mounts for warning panels including socket left and right at the gooseneck and rear panel • Detachable ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • Rear galvanized plug-in stanchions removable (body length approx. 2,560 mm) • 3 pairs of WADER container pockets in the loading platform for a 20ft (30ft) or a 40ft container • 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform • Lifting axle on the front axle with TEBS E control according to the current axle load and loading condition • Movable mounting rails for ALU drive-on ramps at the rear of the vehicle Bjdpfx Asma Hf Rsbrolc • 20 x 20 mm square climbing strips at 200 mm intervals on the outer frame chamfer of the loading platform • BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump cover • Four extendable warning panels approx. 423 x 423 mm with a position light, extendable by approx. 400 mm • Holder for beacon mounted on the warning panels • European reflector plates (red-yellow) on the rear of the trailer • 80 km/h speed limit stickers at rear and both sides • Axle load gauge with load diagram included • HRM Metallisation (High Resistance Metallisation) of the outer frame • Complete steel structure is shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminum 15%) using hot finishing

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable Bljdpfx Abeiu Er Aorsc - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: novo, lastna masa: 34.500 kg, največja dovoljena obremenitev: 106.700 kg, skupna masa: 141.200 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.150 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 580 mm, velikost pnevmatike: 285/70 R19.5, barva: siv, obratovalna teža: 34.500 kg, Oprema: ABS, Gooseneck: - Gooseneck hydraulically lift/lowerable as well as detachable - Length approx. 3,650 mm - Extensive lashing positions - For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie: - Hook mounts at front and rear - Chassis length x chassis width approx. 3,560 mm x 2,850 mm - Extensive lashing positions Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and bolted lug coupling at the rear - Length x base width approx. 7,150 mm x 2,850 mm - Beam height x beam width approx. 430 mm x 1,350 mm - Loading height 580 mm with 150 mm ground clearance - 5 pairs of hanging lashing rings (LC 10,600 daN) - 4 pairs of threaded blocks M30 on inner beam for mounting screw-on rings 5-Axle Rear Bogie: - Mechanical bolt-on lug coupling for fitting a lowbed front, rear end traverse - Chassis length x chassis width approx. 6,840 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear bogie): - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-plugs for securing in lifted position - Final paint of axles with 2 coats of 2K paint, single-colour in MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tyres 285/70 R19.5 Steering Override: - Remote steering from the front and rear via cable remote control with push buttons, including axle tracking control - Socket for steering control operation on the gooseneck - Cable remote control with push buttons including axle tracking control Included accessories: - Yellow-red air couplings on galvanised front connection rail - Steel headboard approx. 400 mm high - 4 wheel chocks with holders - 2 spare wheels 285/70 R19.5 - 3.5" kingpin - Gantry with winch for spare wheel at the front side of the gooseneck - Truck hydraulic connection with flow control valve (40 l/min), including gantry for suspension of supply lines, tractor unit tank must be at least 80 litres with couplings - White reflective tape according to EU regulations on sides and extension, red at rear - Plug-in ALU side panels and rear wall on gooseneck, approx. 400 mm high, anodised - Operating lever on gooseneck protected by folding cover - Separate air connection with air pistol on gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2: 1x on the gooseneck, 1x on 3-axle bogie, 1x on 5-axle bogie - Variomax tool kit - Multi-coupling hydraulic connections in the lowbed hook area - Front bogie with separate air connection for air screwdriver - Threaded inserts (ø 40 mm) every approx. 500 mm on outside of upper flange of excavator deck for screw rings Bsdpfx Ajwhywfobrelc - Folding extensions with steel mats, width adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel mats with rubber covering approx. 12 mm thick - Two INOX toolboxes 855 x 340 x 390 mm - Radio remote control for steering override in addition to cable remote - Painted sand layer as anti-slip measure - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery