Faymonville Nizki Nakladalnik nakup rabljenega (206)

Stanje: rabljeno, največja dovoljena obremenitev: 38.080 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2025, naslednji pregled (TÜV): 02/2026, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete equipment details available on request. Loading platform - Loading platform, extendable design with pneumatically operated locking - Loading area with approx. 30 mm thick wooden floor, enclosed in omega profiles - 7 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (test load approx. 50 t) Axles - BPW axles and suspension - All axles hydro-mechanically forced-steered - With disc brakes - Technical axle load: 10,000 kg each (ET 0) - Air suspension with lift and lower valve - Axle tools Tyres - Tyres 385/65 R 22.5 Kwsdsxf Sifjpfx Aa Rou Braking system - Braking system in accordance with EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Warning signs - Bracket for warning plates on both the gooseneck and rear wall, including socket Electrical system - Electrical system in accordance with EU regulations - Lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets, connection according to ISO 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction - Steel construction made from high-strength fine-grained steels - Steel grades S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork - First-class and durable corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-color 2-component (2K) topcoat in RAL 3002 Carmine Red - Wheels in silver; add-on parts per manufacturer’s specification - Rear section metallized and painted in RAL 9010 (pure white) Included accessories - 2-inch king pin - 4 wheel chocks with bracket on the bulkhead - Remote-controlled steering front and rear via cable remote, with axle single-track monitoring (no installation in tractor unit required) - Manual and documentation on USB stick - Electro-hydraulic power pack - Yellow-red air couplings on galvanized front terminal strip - Yellow reflective tape to EU regulation on sides, extension and rear of trailer - European reflective marking boards (red-yellow) on trailer rear - One mudflap at trailer rear - Bracket for beacon at trailer rear - 10 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform - 1 spare wheel carrier under platform, right side in driving direction - Speed sticker 80 km/h on rear and both sides - Load gauge for axle load determination including load chart - Galvanized steel bulkhead (EN12642-XL), approx. 1,600 mm high - 6 pairs of WADER container pockets in loading platform for 1 x 20', 2 x 20', or 1 x 40' container; for the extension, an additional locking position for a 45' container - 4 pairs of transverse stake pocket rails in the loading area for approx. 100 x 50 mm plug-in stanchions - Storage for removable stanchions inside bulkhead - Access ladder mounted left and right in driving direction - One INOX toolbox, approx. 1,200 x 460 x 550 mm, front left under platform - An additional tool ...

Stanje: novo, največja dovoljena obremenitev: 73.090 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You will find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Below is an excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable * Length approx. 3,650 mm. Suitable for tractor units: 6x4 or 8x4 2-axle compact front bogie: * Hook mounts at front and rear. Length: approx. 2,200 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design, with fixed hardwood flooring, approx. 50 mm thick * Drive-over bridge hooks at the front and bolt/lug coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 7,150 mm Ksdpfx Aajxbv Aus Rowu * Beam height: approx. 300 mm * Beam width: approx. 650 mm * Loading height approx. 450 mm with ground clearance of approx. 150 mm 4-axle rear bogie: * Mechanical pin/lug coupling for attaching a lowbed at the front * End crossmember at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm 2-axle front bogie: * Pendulum axles, all axles hydro-mechanically steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position * Final painting of axles with two layers of 2K paint, single color in MB7350 Novagrau * Technical axle load: approx. 14,640 kg (62 km/h) * Hydraulic axle compensation 4-axle rear bogie: * Pendulum axles, all axles hydro-mechanically steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position * Final painting of axles with two layers of 2K paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg (62 km/h) * Hydraulic axle compensation Tyres: * Tyres as per manufacturer's choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Entire steel structure automatically shot-blasted after welding process * Second abrasive blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) * Final coating with 2 layers of 2K top coat, single color in RAL 3002 Carmine Red according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Removable ALU side and rear walls for gooseneck, approx. 400 mm high * 3.5 inch king pin * Truck hydraulics connection with flow regulator (20 l/min), including gallows for hose suspension * Tank on tractor unit (SZM) must be at least 80 liters * With MAX Trailer coupling units, otherwise couplings to be supplied free issue by customer * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Multi-coupling hydraulic connectors on gooseneck * Front bogie with separate air connection for pneumatic screwdrivers * BEKA-MAX central lubrication for one 2-axle bogie with standard grease NLGI-2 * Preparation for mounting bolt-on container positions for 1 x 20' or 1 x 30' on the outer beams * Without container locks * Mounting points on the outer beams of the loading platform for foldable extensions * BEKA-MAX central lubrication for one 4-axle bogie with standard grease NLGI-2 * Socket on rear bogie for connection of cable remote control for trailing steering * Rear bogie with trough * One LED beacon with bracket left and right on the rear crossmember

Stanje: zelo dobro (rabljeno), prva registracija: 07/2021, dolžina tovornega prostora: 134.500 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 770 mm, skupna dolžina: 134.500 mm, skupna širina: 2.550 mm, skupna višina: 770 mm, barva: drugo, Leto izdelave: 2021, Oprema: ABS, = Dodatne možnosti in oprema = - Zračno vzmetenje = Dodatne informacije = Lastna teža: 8.520 kg Nosilnost: 31.000 kg Skupna masa: 50.900 kg Kedpfx Aasutngcj Rewu Višina nakladalne površine: 77 cm Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Poškodbe: nobene

Stanje: rabljeno, največja dovoljena obremenitev: 57.900 kg, skupna masa: 73.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 07/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete inventory of vehicles, including models available for immediate or short-term delivery, is available on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long * Gooseneck tapered at the rear, approx. 1,000 mm x 10° * Technical fifth wheel load: 30,000 kg; suitable for tractor units: 4x2, 6x2, and 6x4 Loading Area: * Extendable loading area, approx. 8,800 mm long, with rear tapering approx. 500 mm x 10° Axles and Suspension: * BPW axles and suspension * 1st axle with hydraulic steering and electro-magnetic reverse lock, all other axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg per axle * Air suspension with lift and lower valve Tyres: * 235/75 R 17.5 3PMSF twin tyres, load index 143/141J (144/144F) Braking System: * WABCO EBS-E braking system compliant with EU regulations Paintwork: * Trailer colour: RAL 3002 Carmine Red Included Accessories: * Plug-in steel front wall, approx. 400 mm high * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 3 kW electro-hydraulic power unit for hydraulic functions (excluding hydraulic winches), without installation of supply connections to the tractor unit * Parking position for warning signs on the gooseneck when not in use * 1 mounting adapter for E-wheel in front of the gooseneck bulkhead (without E-wheel) * External carrier on the gooseneck with fixing bores for bolted lashing rings. First bore approx. 200 mm from the front, then every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of removable ALU side walls on the gooseneck, approx. 400 mm high, anodized finish * 1 removable ALU rear wall on the gooseneck, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood floor on the gooseneck, chequered plate above the king pin * 2 inch king pin * Mechanical landing legs with 2-speed gearbox and JOST Modul B crank Ksdpsxuyprefx Aa Rowu * Continuous approx. 50 mm thick hardwood floor on loading area and interrupted between the axles * Securing of the loading area with conically welded locking profiles approx. every 500 mm * Long holes for detachable and repositionable bridging elements: - at the front of the loading area * 1 movable intermediate table, approx. 300 mm wide, for the draw-out tube with large cross-section, with chequered plate surface; at front and rear with long holes for attachable and repositionable bridging elements * 1 pair of lashing rings on the front cross-member (LC 10,000 daN) * 7 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * Extendable (galvanized) widening elements, approx. 230 mm per side (without timber planks) * 1 pair of mechanical rear supports * Remote steering from front and rear using cable remote control with push-button operation; single-track alignment of axles, without installation in the tractor unit * Cable (approx. 35 mm², approx. 3.5 m long) for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug (NATO-NATO) * 2 additional pairs of bolted lashing rings (LC 5,000 daN) * 1 single-piece INOX toolbox, approx. 2,480 x 340 x 390 mm (L x W x H), straight design, with two side exterior doors and one top lid, located behind the front wall.

Stanje: novo, konfiguracija osi: 3 osi, skupna dolžina: 17.700 mm, skupna širina: 2.990 mm, skupna višina: 3.810 mm, vzmetenje: hidravlika, velikost pnevmatike: 245/70 R17.5 Double Fitted (143/141J), barva: rdeča, Leto izdelave: 2024, Oprema: dvižna zadnja plošča, Color: Red Payload: 100,250 kg Weights: - King-pin load: 38,000 kg - Axle load: 12,000 kg - Total axle load: 96,000 kg - Gross vehicle weight (GVW): 134,000 kg - Unladen weight: 33,750 kg - Payload capacity: 100,250 kg Axles: - Axle brand: BPW ECO PLUS - Hydraulic suspension - 7 steered axles (2nd axle fixed) - First two axles liftable - Drum brakes - Brake system SN 3020 for ABS with sensors - Tyres: 245/70 R17.5 dual mounted - Load index: 143/141J Dimensions: - Length: 17,700 mm - Extended length: 19,500 mm - Maximum extended length: 37,900 mm - Loading floor width: 3,990 / 3,450 mm - Loading floor height: 1,050 mm ±150 mm - Height: 3,815 mm Additional equipment: - NATO plug Kwedpjuu E Tisfx Aa Reu - Hydraulically foldable ramps - Outriggers and planks for widening the loading platform - Electro-hydraulic pump for trailer functions - Spare wheel with holder - Work lights - Rear underrun protection with integrated lights - 2-inch king-pin - Centralized greasing system - Lashing rings - Wooden loading floor - Oversize load marker boards - Remote control General Information: Year of manufacture: 2024 Axle Configuration: - Tyre size: 245/70 R17.5 dual fitted (143/141J) - Axle brand: BPW ECO PLUS - Brakes: drum brakes - Suspension: hydraulic suspension Rear Axle 1: Dual tyres; Lift axle; Max axle load: 12,000 kg; Steered; Tyre tread depth left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear Axle 2: Dual tyres; Lift axle; Max axle load: 12,000 kg; Tyre tread depth left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear Axle 3: Dual tyres; Max axle load: 12,000 kg; Steered; Tyre tread depth left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear Axles 4-8: Dual tyres; Max axle load: 12,000 kg; Steered; Tyre tread depth left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Weights: - Unladen weight: 33,750 kg - Permissible payload: 100,250 kg - Gross vehicle weight: 134,000 kg Functionality: - Loading platform height: 105 cm - Extendable body: Yes Condition: - Overall condition: Very good - Technical condition: Very good - Visual condition: Very good Financial Information: - Price: On request Further information: Please contact Stefan Schaapveld for more details...

Stanje: novo, največja dovoljena obremenitev: 52.810 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, featuring vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available upon request. Loading platform: * Platform with approx. 30 mm thick hardwood floor * 10 pairs of hinged external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system in compliance with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For proper display, the tractor unit must be capable of transmitting and displaying this data. Axles and suspension: * BPW axles, technical load capacity 12,000 kg each, first axle rigid, all other axles hydro-mechanically force-steered, mounted on turntables * Air suspension with lift and lower valve * Axle tools Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking system: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor Steel construction: * Steel structure made of high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (Yield strength 355MPa), S690QL/S700MC (Yield strength 690MPa) Painting: * Entire steel structure automatically shot-blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of two-component topcoat, single colour in RAL 1007 Daffodil Yellow, as per RAL 841GL system * Rear section metallized and painted in RAL 9010 (Pure White) * Rims Silver Grey * Paint system tested in salt spray test according to ISO 9227-NSS * All cavities sealed with special wax Including accessories: * Platform with approx. 30 mm thick hardwood floor * 2 inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanized front connection strip * At the gooseneck and rear plate left and right one bracket each for warning signs including socket * Steering from front and rear via wired remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes on the outer frame of the platform * Load pressure gauge for axle load determination including load diagram * Lift axle on the front axle controlled by TEBS E * 5 pairs of stake pocket strips across the platform for approx. 100 x 50 mm plug-in stakes * One INOX toolbox 1,200 x 460 x 550 mm, mounted at the front left underneath the platform (in direction of travel) Kwodpfexttc Ajx Aa Reu * 1 tow coupling with reinforcement bolted to the rear crossmember * BEKAMAX central lubrication system (Pico) with NLGI-2 standard grease and removable protection for the pump * 2 LED reversing lights mounted on the rear plate * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum)

Stanje: novo, največja dovoljena obremenitev: 37.635 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete stock of vehicles, including those available immediately or at short notice, can be found on our website. Excerpt from the equipment features. Full equipment list available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick One-piece steel ramps: * One pair of galvanized, one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramp with hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not need to be included in the vehicle length when in transport position Loading platform: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm and extensions at the lower section * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D). Includes 3-piece removable galvanized covers over the wheel recesses (approx. 670 mm wide) - max. point load 5 t/piece * Recess in the chamfer and extending into the loading platform for excavator boom (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN). 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t static test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, activated via reverse gear and manually * Air suspension with lift and lowering valve * Axle tools Tyres: * Tyres 235/75 R 17.5 3PMSF – manufacturer at our discretion * TPMS: Tyre Pressure Monitoring System in accordance with ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface per ISO 11992. For correct display, the towing vehicle must be able to relay and display this data Ksdpfoxtc Ubjx Aa Rjwu Braking system: * WABCO braking system compliant with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel structure: * Steel structure made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system compliant with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets * Connections as per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paint finish: * Complete steel structure automatically blasted with turbine blasting machine after welding * Secondary shot-blasting with corundum for optimum coating adhesion * Top coat: 2 layers of 2K finish, single colour in RAL 3002 Carmine Red, as per RAL system 841GL * Wheels in silver * Rear section metallized and painted in RAL 9010 (Pure White) * Paint system tested with salt spray test in accordance with ISO 9227-NSS * Cavity sealing with specialist wax Including the following additional equipment: * 2-inch king pin * One ver

Stanje: rabljeno, največja dovoljena obremenitev: 51.870 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete stock of vehicles, including those available immediately and at short notice, can be found on our website. Extract from the equipment. Full equipment details available upon request. GOOSENECK - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with 1,000 mm x 10° bevel - Suitable for tractor units: 4x2, 6x2, and 6x4 - Removable steel front wall, approx. 400 mm high - Yellow-red air couplings on the front connector strip - ASPÖCK UNIBOX on the front connector strip with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic unit for hydraulic control - Outer beams of the gooseneck with mounting holes for bolt-on lashing rings - One mounting hole at the upper rear of the gooseneck outer beams for a bolt-on lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - On the gooseneck, 1 pair of plug-in aluminum sideboards, approx. 400 mm high, anodized finish - On the gooseneck, one plug-in aluminum rear board, approx. 400 mm high, anodized finish - Approx. 40 mm thick hardwood flooring above the gooseneck - 2-inch kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Rear mount on gooseneck for aluminum drive-on ramps - Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOADING PLATFORM - Extendable loading platform, approx. 8,800 mm long, rear with 500 mm x 10° bevel - Recess in the loading platform and the bevel to accommodate excavator dipper arm, approx. 2,490 x 750 x 210/290 mm (L x W x H) - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension - 1st and 2nd axles fixed, 3rd and 4th axles steering trailing axles Kedsxtc Uhspfx Aa Rswu - 3rd and 4th axles with electro-magnetic reverse lock, activating via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with raising/lowering valve - 235/75 R 17.5 3PMSF twin tires - Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load: approx. 50,000 kg - Continuous and inter-axle interrupted approx. 50 mm thick hardwood flooring on the loading platform (increased friction coefficient) - Loading platform locking using conically welded locking profiles every approx. 250 mm - Slotted holes for attachable and repositionable bridging elements at the front of the platform - Intermediate platform with offset surface, approx. 300 mm wide, for the large cross-section sliding tube with sheet covering – front and rear with slotted holes for attachable and repositionable bridging elements – removable panel flush with the loading platform - 1 pair of lashing rings on the front cross member (LC 10,000 daN) - 6 pairs of recessed lashing rings in the outer frame, foldable outwards (LC 10,000 daN) - Additionally, 1 pair of external lashing rings on the front cross member, rotated approx. 90° inwards to the platform (LC 10,000 daN) - Extendable (galvanized) extensions, approx. 230 mm per side - 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in the platform before the 1st axle, wheel recesses with sheet covering and square climbing strips of approx. 15 x 15 mm, each approx. 200 mm - Between 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split lengthwise, with wood overlay, external plug-in mounting

Stanje: rabljeno, barva: modra, Leto izdelave: 2016, Faymonville F-S43-1ABA. Baujahr: 2016. 10-Tonnen-SAF-Achsen. Zulässiges Gesamtgewicht: 42.000 kg. Kwedoxvzm Uspfx Aa Rsu Sattellast: 18.000 kg. Servolenkung, 3 gelenkte Achsen. Luftfederung. Seilwinde. EBS, ABS, ALB. Hydraulik funktioniert über Duplo-Elektrik. Hydraulische Brücke vom Boden zum Schwanenhals. Länge: 3.000 mm. Zentralschmieranlage. 2-Punkt-Hydraulikabstützungen am Heck. 2-fach hydraulische Rampen: - hydraulisch links/rechts verschiebbar - Länge: 2.800 + 1.700 mm. Abmessungen: Schwanenhals: L: 3.800 mm. B: 2.480 mm. H: 1.400 mm. Sattellast: 1.150 mm. Ladefläche: L: 9.600 mm. B: 2.550 mm. H: 900 mm. Bereifung: 235/75R17,5, 70% Profil. Deutscher Anhänger! ID-Nr.: 449. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Anzeigen, Angebote und Offerten von Heinhuis, für alle von Heinhuis abgeschlossenen Verträge sowie für sämtliche diesen vorausgehenden Verhandlungen. Mit jeder Form der Reaktion akzeptieren Sie die Gültigkeit der Allgemeinen Geschäftsbedingungen der Firma Heinhuis und erklären, dass Sie diese Allgemeinen Geschäftsbedingungen zur Kenntnis genommen haben. Unsere Preise verstehen sich als Netto-Exportpreise. = Weitere Informationen = Baujahr: 2016 zulässiges Gesamtgewicht: 42.000 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: novo, skupna dolžina: 19.000 mm, skupna širina: 600 mm, skupna višina: 450 mm, Leto izdelave: 2022, Color: Red Load capacity: 430,000 kg Extendable Manufacturer: Faymonville Model: G-Module Vesseldeck Year: 2022 Compatible with Goldhofer THP SL Coupling Heads G-Module SL lowbed coupling head Hydraulically extendable Basic width: 3,000 mm Hydraulically extendable to 4,700 mm Beam height: 450 mm Coupling length: 1,200 mm Weight: 4,500 kg 4 pairs of lashing rings (LC 16,000 daN) 2 alignment pins Control panel for hydraulic adjustments Color: RAL 3002 Telescopic Beams 1 pair of telescopic beams Length: 8,000 mm + 5,000 mm Total length: 13,000 mm Construction height: 450 mm Beam width: 450/600 mm Weight: 9,600 kg Lashing rings every 1,000 mm Kodjuu Hixopfx Aa Rowu LC 10,000 daN 430 MTO Compression joint at front and rear Color: RAL 3002 Elongation Beams 1 pair of elongation beams Coupling length: 6,000 mm Construction height: 450 mm Beam width: 450/600 mm Weight: 4,300 kg Lashing rings every 1,000 mm LC 10,000 daN 560 MTO Compression joint at front and rear Color: RAL 3002 Coupling Pin 1 hydraulic coupling pin for G-Module 1 connection line kit for G-Module coupling pin = Further Information = Year of manufacture: 2022 Unladen weight: 18,500 kg General condition: very good Technical condition: very good Visual condition: very good Price: On request Contact Stefan Schaapveld for further information.

Stanje: novo, največja dovoljena obremenitev: 36.370 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Our complete range of vehicles, including those available for immediate or short-term delivery, can be found on our website. Excerpt from the equipment list. Full specification available on request. Loading platform: Hardwood floor loading platform with rear beveled section approx. 1,000 mm x 8° 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of fold-out lashing rings (LC 5,000 daN) 2 pairs of fold-out lashing rings (LC 10,000 daN) Cut-outs in the outer frame of the loading platform for attaching tie-down straps (LC 2,000 daN) Landing legs: JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: BPW axles, air suspension, disc brakes (approx. 377 mm), with lift/lower function (ET 120) Axle tools Tyres: Tyres 435/50 R 19.5 TPMS: TPMS tyre pressure monitoring system in accordance with ECE R 141 Data transfer to the tractor unit is via the standardised EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Brake system: Wabco braking system in compliance with EU regulations, with EBS-E (2S2M), without coupling lines to the tractor unit Steel structure: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system in compliance with EU regulations 24 Volt ASPÖCK-NORDIK (ASS3) lighting ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: Complete steel structure is automatically blast-cleaned with shot blasting system after welding Second blasting with corundum for optimal adhesion of the coating system HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection Final coat: two layers of 2K topcoat, single colour in RAL 3002 Carmine Red according to RAL System 841GL Rear section metallised and painted in RAL 9010 (Pure White) Paint system tested in salt spray test to ISO 9227-NSS Cavities sealed with special wax No metallic paint finish possible Including the following additional equipment: Yellow-red air couplings on the galvanised connector strip at the front 4 wheel chocks with holders 2" kingpin Yellow reflective tape according to EU regulations on the sides and rear of the trailer European reflective signs (Red-Yellow) at the rear of the trailer Loading platform with robust hardwood floor 1 spare wheel holder under the platform, right-hand side in direction of travel Galvanised folding support legs under the rear beveled section of the platform 9 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform 1 bracket for a warning beacon at the rear of the trailer Brackets for warning signs with sockets on both the gooseneck and rear left and right 1 galvanised cross bracket under the platform (approx. 2,400 x 640 x 165 mm) 1 galvanised steel front wall (EN12642-XL), approx. 1,600 mm high Anti-slip sand coating painted onto the central beam 6 pairs of WADER container pockets in the loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container 3 pairs of transverse stake pocket strips installed in the loading platform for plug-in stakes approx. 10 Kwsdpfxoxq I Dvs Aa Rju

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.550 mm, skupna dolžina: 13.600 mm, skupna širina: 2.540 mm, skupna višina: 1.550 mm, vzmetenje: zrak, velikost pnevmatike: 275 / 70 R22.5 – Good Year, barva: rdeča, Leto izdelave: 2024, Color: Red Loading capacity: 60,800 kg Extendable Main Features Manufacturer: Faymonville Model: F-S44-1BBY Triple Extendable Flat Bed Chassis number: YAFSR4009S0036724 Year: NEW / Unused Weights/Loading Capacity Fifth-wheel load: 28,000 kg Axle load: 12,000 kg Total axle load: 48,000 kg GVW (Gross Vehicle Weight): 76,000 kg Unladen weight: 15,200 kg Payload: 60,800 kg Axles Axle manufacturer: BPW Air suspension Hydraulic steering on all axles WABCO brake system with EBS Tyres: 275/70 R22.5 – Goodyear Load index: 148/145M Dimensions Length: 13,600 mm Extensions: 7,200mm + 7,400mm + 7,600mm Maximum extended length: 35,800 mm Loading floor width: 2,540 mm Height: 1,550 mm (+/- 100 mm) Additional Information High-resistance metallized steel construction NATO plug Lashing rings Stake pockets Wooden loading floor Mechanical landing gear Electro-hydraulic pump for trailer functions Spare wheel Rear bumper with lighting King-pin 2.0” + 3.5” Central greasing system with 2 BEKAMAX pumps = More Information = General Information Year of manufacture: 2024 Axle Configuration Tyre size: 275/70 R22.5 – Goodyear Axle brand: BPW Suspension: Air suspension Rear axle 1: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Weights Unladen weight: 15,200 kg Payload: 60,800 kg Gross vehicle weight: 76,000 kg Functional Loading floor height: 155 cm Extendable body: Yes Kwsdpfx Aov I Dqqea Reu Condition Technical condition: Very good Optical condition: Very good Further information Please contact Stefan Schaapveld for more information.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 02/2022, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.540 mm, skupna dolžina: 11.200 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 245/70/17.5, barva: rdeča, Leto izdelave: 2022, Oprema: ABS, = Further options and accessories = - Air suspension = Further information = Kwedpfjwffibox Aa Rsu Axle configuration Tyre size: 245/70/17.5 Axle brand: BPW ECO PLUS Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Max. axle load: 12,000 kg Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steering Weights Unladen weight: 8,250 kg Payload: 40,750 kg Gross vehicle weight: 49,000 kg Functional Loading platform height: 85 cm Extendable body: Yes Condition Technical condition: Very good Optical condition: Very good FAYMONVILLE F-S42-1BBA 2-AXLE LOWBED TRAILER 2 x axles with air suspension 2nd axle is steering 12,000 kg technically permissible maximum weight per axle Technically permissible maximum total weight 49,000 kg WABCO EBS-E System Tyre size 245/70 R17.5 Extendable loading area Loading area length 755 cm + 500 cm extendable up to 1,255 cm Loading area width 254 cm Loading area height +/- 85 cm Coupling height +/- 120 cm Lashing rings and round pockets Marker boards front and rear

Stanje: novo, lastna masa: 9.600 kg, največja dovoljena obremenitev: 53.400 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.400 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.340 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: siv, Oprema: ABS, Platform area: - Platform with approx. 30 mm thick hardwood flooring - 10 pairs of folding lash rings (outward folding) Landing legs: - JOST landing legs with 2-speed gearbox, 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg per axle; first axle fixed, all other axles hydro-mechanically forced-steered, mounted on turntables - Air suspension with raise/lower valve - Axle tools included - Tyres: 385/65 R22.5 Braking system: - WABCO brake system in accordance with EU regulations, with EBS-E (4S3M) Steel construction: - Steel structure made from high-tensile fine-grained steels - Steel grades: - S355J2+N / S355MC - S690QL / S700MC Electrical system: - Electrical system according to EU regulations, 24 Volt lighting - ASPÖCK-UNIBOX on the front connection rail with 24N, 24S and 15-pin sockets - Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component zinc-dust primer - High-quality 2-component topcoat, single-colour in Nova Grey - Rear section metallized and painted in RAL 9010 Accessories included: - Platform with approx. 30 mm thick hardwood flooring - 2" king pin - One galvanized steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanized connection rail at the front Kwedpfjrq Dlfex Aa Rju - 4 wheel chocks with holders on the front wall - Storage for 1,000 mm plug-in stanchions in the rear central beam - On the gooseneck and rear panel, left and right, a mounting bracket for warning signs with socket - Remote steering from front and rear, operated via cable remote control with push-buttons; with axle tracking control - Electro-hydraulic power pack - White reflective tape as per EU regulations along the side of the trailer, red at rear - 12 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the load bed - European reflective plates at the trailer rear - One bracket for a rotary beacon at the rear of the trailer - One mudflap at the trailer rear - Manual and documentation on USB stick - Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable protector for the pump - TPMS tyre pressure monitoring system: - The towing vehicle must be capable of transmitting and displaying these data for correct readout - Lift axle on the front axle, automatically controlled by TEBS E in accordance with current axle load and trailer loading status - Radio remote control for the remote steering in addition to the cable remote, with indicator lamps on the receiver for axle tracking control - 5 pairs of crosswise stanchion pocket strips on the bed for 100 x 50 mm plug-in stanchions - 80 km/h speed stickers at rear and both sides - Adjustable access ladder mounted left and right in direction of travel - 2 reversing lights mounted at the rear panel - Load gauge for determining axle loads, including load diagram - HRM metallization of the outer frame: complete steel structure shot-blasted, then all designated visible areas hot metalized with ZINACOR 850 (Zinc 85% - Aluminum 15%)

Stanje: novo, največja dovoljena obremenitev: 38.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full specification available on request. Loading Platform: * Extensible loading platform with pneumatically operated locking system * Platform surface with approx. 30 mm thick wooden planks * 7 pairs of foldable lashing rings (LC 5,000 daN) * 3 pairs of foldable lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) Landing Leg: * JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Tyres: * Tyres 385/65 R 22.5 Kwjdpfx Ajxl Nf Dea Reu Axle: * BPW axles and suspension, all axles force-steered by hydro-mechanical system * Equipped with disc brakes * Technical axle load: 10,000 kg (ET 0) * Air suspension with lift and lower valve Brake System: * WABCO brake system in line with EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Paintwork: * High-quality two-component (2K) topcoat, single colour in RAL 3002 Carmine Red Accessories: * Remote steering front and rear via cable remote control with push buttons, including axle tracking control. (no installation in the tractor unit) * Electro-hydraulic power unit * 4 wheel chocks with holders on the front wall * 2-inch king pin * Galvanised connection panel at the front with yellow-red air couplings * Bracket for a rotating beacon at the rear of the trailer * 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes on the outside frame of the loading platform * 1 spare wheel holder under the platform, right-hand side in direction of travel (without spare wheel) * Load pressure gauge for axle load determination including load diagram Including Special Equipment: * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks on the platform, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; when extended an additional locking point is provided for a 45' container * 4 pairs of crosswise stake pocket strips mounted in the platform, for approx. 100 x 50 mm plug-in stakes * Storage bracket for up to 9 pairs of plug-in stakes bolted to the inside of the front wall * Climbing ladder mounted on both left and right sides in the direction of travel * 1 INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted under the platform, front left * Additional INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted under the platform, left side * Platform deck with approx. 30 mm thick wooden floor, framed with omega sections * Lifting axle on the front axle with control via TEBS E * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 * 2 LED reversing lights mounted on the rear plate * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * HRM metalizing (High Resistance Metallisation)

Stanje: novo, konfiguracija osi: 3 osi, skupna dolžina: 9.300 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, medosna razdalja: 1.360 mm, barva: modra, Leto izdelave: 2023, Oprema: dvižna zadnja plošča, Color: Blue Payload: 54,465 kg Main Features: Manufacturer: Faymonville Model: MAX 110-Z-4AA-9.30-U Chassis Number: YAMT14XX4N0107629 Year: New and unused (2023) Weights / Loading Capacity: King-pin load: 23,000 kg Axle load: 12,000 kg Total axle load: 48,000 kg Gross Vehicle Weight (GVW): 71,000 kg Unladen weight: 16,535 kg Payload: 54,465 kg Axles: Axle manufacturer: BPW Hydraulic steering Pneumatic suspension with raising/lowering valve WABCO brake system Tyres: 245 / 70 R17.5 – Michelin (Load index 146/146 F) 1st axle liftable Dual tyres on all axles Dimensions: Load length: 9,300 mm Extensions: 6,500 + 6,800 mm Load floor width: 2,540 mm Load height: 900 mm Additional Equipment: Fully double-extendable load floor Container locks Side extensions including timber insert boards Lashing rings Set of double folding loading ramps Central lubrication system 1x spare wheel plus mount JOST landing gear 24V electrical installation 2.0" king pin One galvanized steel headboard Electrically operated hydraulic pump Manual steering override Twistlocks Axle Configuration and Condition: Tyre size: 245/70 R17.5 Suspension: Air suspension Rear axle 1: Dual tyres; Lift axle; Max. axle load: 12,000 kg; Steering; Axle make: BPW; Tyre tread (all sides): 100% Rear axle 2: Dual tyres; Max. axle load: 12,000 kg; Steering; Tyre tread (all sides): 100% Rear axle 3: Dual tyres; Max. axle load: 12,000 kg; Steering; Tyre tread (all sides): 100% Rear axle 4: Dual tyres; Max. axle load: 12,000 kg; Steering; Tyre tread (all sides): 100% Weights: Unladen weight: 16,535 kg Payload: 54,465 kg Ksdjuu Hcfepfx Aa Rjwu GVW: 71,000 kg Functional: Platform height: 900 mm Extendable chassis: Yes, fully extendable Condition: General condition: Very good Technical condition: Very good Visual condition: Very good Financial Information: Price: On request Further Information: Please contact Stefan Schaapveld for more information.

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish Kwsdpfxsrgzv Ne Aa Reu * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 73.540 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from equipment features. Full equipment list available upon request. Gooseneck: Kodpfexbmpljx Aa Rjwu * Hydraulically liftable/lowerable and detachable gooseneck, length approx. 3,650 mm * 2 pairs of folding lashing rings on the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings at the center section of the gooseneck (LC 10,600 daN) * Suitable for 6x4 or 8x4 2-axle tractor units Compact Front Chassis: * Hook mounts at front and rear, length approx. 2,200 mm * Chassis width: approx. 2,850 mm Excavator Deck: Telescopic excavator deck with drive-over deck hooks at the front and bolt-lug coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle Rear Chassis: * Mechanical bolt-lug coupling for attaching a low bed at the front * Rear end cross member chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres * Front chassis: 8 x 285/70 R19.5 M+S at manufacturer’s choice * Rear chassis: 16 x 285/70 R19.5 M+S at manufacturer’s choice * Load index 150/148J Paintwork: * Complete steel construction automatically blasted with shot-blasting system after welding. Second blasting with corundum for optimal adhesion of coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure superior corrosion protection * Final paint in 2 coats of 2K topcoat, single color in RAL 3002 carmine red, according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side and rear walls on the gooseneck, approx. 400 mm high, anodized finish * 3.5” kingpin * Truck hydraulic connection with flow regulator (20 l/min) * Crane for supply line suspension; tractor unit fuel tank must have a minimum capacity of 80 l * With MAX Trailer coupling pieces, otherwise coupling pieces to be supplied by customer ex works * BEKA-MAX central lubrication for a gooseneck with standard grease NLGI-2 * Tool kit Art. No. 612452 * Multi-coupler hydraulic connections on the gooseneck * Front chassis with separate air connection for air impact wrench * BEKA-MAX central lubrication for a 2-axle chassis with standard grease NLGI-2 * One 7-pin socket left and right rear on front chassis for warning signs * Threaded insertion option (ø approx. 40 mm) every 500 mm on the upper flange of the excavator deck’s outer tube for lashing rings (LC 16,000 daN) * Folding extensions with steel mats, width adjustable from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle chassis with standard grease NLGI-2 * Socket on rear chassis for remote cable control of steering * Rear chassis with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on gooseneck left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of diesel engine * Operation of steering, in addition to cable remote control * One LED work light left and right on gooseneck rear plate with protect...

Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Approx. 30 mm thick hardwood flooring Loading platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - 235/75 R17.5 3PMSF tyres, manufacturer of our choice - TPMS – Tire Pressure Monitoring System according to ECE R 141 - Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992 - The tractor unit must be capable of transmitting and displaying these data for correct indication. Axles: - BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicators - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made from high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with shot-blast machine after welding - Second blasting with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection - Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test according to ISO 9227-NSS Kwedpfxjw Tpq Ds Aa Rou - Cavities sealed with special wax Including the following accessories: - On both the gooseneck and at the rear left and right, one holder for warning boards, including socket - Spare wheel holder in front of the bulkhead (without spare wheel) - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized connection panel at the front - Galvanized folding supports under the rear slope of the loading platform - Hardwood rear impact protection from gooseneck rear wall to loading platform - 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN) - On the gooseneck, aluminum side and rear walls

Stanje: novo, največja dovoljena obremenitev: 38.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Extract from the equipment list. Full equipment details available on request. Loading platform: * Extendable loading platform with pneumatically operated locking mechanism * Platform with approx. 30 mm thick wooden floorboards * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching lashing straps (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Kwjdpfx Aow Tpr Isa Rsu Tyres: * Tyres 385/65 R 22.5, brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via the standardised EBS interface according to ISO 11992. For correct display, the truck must be capable of transmitting and displaying this data. Axle: * BPW axles and suspension * All axles hydro-mechanically force-steered * Disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with raise/lower valve * Axle tools Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction made from high-strength fine-grained steel * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical installation according to EU regulations * LED lighting, 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets, connections according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically blasted after welding using a wheel blasting machine * Second blasting treatment with corundum for optimal adhesion of the coating system * Final coat with 2 layers of 2K topcoat, in a single colour RAL 3002 Carmine Red conforming to RAL system 841GL * Rims in silver grey * Rear end metallised and painted RAL 9010 (Pure White) * No metallic paint possible * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Accessories: * Remote steering from front and rear via cable remote control with push buttons, axle single-track control (without installation in the tractor unit) * Electro-hydraulic power pack * 4 wheel chocks with holders on the front bulkhead * 2-inch king pin * At the galvanised connection panel at the front, yellow-red air line couplings * At the gooseneck and rear left and right, one holder each for warning panels, including socket * 10 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the platform * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container lock pockets in the platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container; the extension includes an additional locking point for a 45' container * 4 pairs of crosswise stanchion pocket bars in the platform, for plug-in stanchions approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stanchions bolted to the inside of the front bulkhead * Access ladder mounted front left and right in direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front under the platform on the

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) Ksdetx Nwnjpfx Aa Rowu * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: novo, največja dovoljena obremenitev: 91.640 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.850 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Gooseneck * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie * Hook connection front and rear, length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Excavator Deck * Telescopic excavator deck BB-A with drive-over deck hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 430 mm, beam width: approx. 1,350 mm * Load height approx. 580 mm with ground clearance approx. 150 mm 5-Axle Rear Bogie Kwedpfxeuvbdto Aa Rju * Mechanical pin-lug coupling for attaching a lowbed at the front, end traverse at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * 3-axle pendulum axle Front Bogie * PENDULUM AXLE, all axles hydro-mechanically force-steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and retaining pins for securing in lifted position * Final coating of axles with 2 coats of 2C paint, solid colour in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres front bogie: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J, pendulum axle 5-Axle Rear Bogie * PENDULUM AXLE, all axles hydro-mechanically force-steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and retaining pins for securing in lifted position * Final coating of axles with 2 coats of 2C paint, solid colour in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres rear bogie: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) guaranteeing optimal corrosion protection * Final coating with 2 coats of 2K paint, solid colour in RAL 3002 Carmine Red, according to RAL system 841GL. Rims in silver grey Incl. Accessories * Steel front wall, approx. 400 mm high * Detachable ALU sideboards and tailboard, approx. 400 mm high, anodized, for installation on the gooseneck * 3.5" kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * BEKA-MAX central lubrication for a 3-axle chassis * One 7-pin socket left and right at the rear of the front bogie for warning plates * Screw-in option (ø approx. 40 mm) every approx. 500 mm on the upper flange of the outer tube of the excavator deck for lashing rings (LC 16,000 daN) * Folding extensions with steel mattress, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * The steel mats can be inserted in 2 positions to create a lowered loading area. Please refer to the respective load diagram for the load capacity, depending on extension width * Steel mats with rubber covering approx. 12 mm thick * One 7-pin socket left and right, front and rear on the rear bogie for warning plates * BEKA-MAX central lubrication for a 5-axle chassis * Rear bogie with socket for cable remote control for steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder

Stanje: novo, največja dovoljena obremenitev: 37.680 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire range of vehicles, including immediately and short-term available units, on our website. Excerpt from the specification. Full specification available on request. Gooseneck * With approx. 30 mm thick hardwood flooring; gooseneck in straight design at the rear * 3 pairs of lashing rings (LC 5,000 daN) Loading Platform * Extendable version * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading deck for attaching tension belts (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Legs * JOST mechanical landing legs with 2-speed gearbox for lifting capacity approx. 24 t (test load approx. 50 t) Ksdpfov Etx Esx Aa Rewu Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle rigid, remaining axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M), no interconnection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc-rich primer * High-quality two-component (2K) topcoat, single-colour RAL 3002 carmine red * Wheels painted silver Included Accessories * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanised front connection strip * 4 chocks with holders mounted on the front wall * Spare wheel holder in front of front wall * Electro-hydraulic unit * Remote rear- and front axle steering via cable remote control with push buttons, includes single-track monitoring for axles (no installation in the tractor unit required) * European reflector boards (red-yellow) at rear of trailer * Yellow reflective tape complying with EU regulations on the sides, extension and rear * On gooseneck and rear plate—left and right—each with holder for warning boards including connector * Mount for rotating beacon at the rear of the trailer * Galvanized folding supports below the bevel of the loading platform * Axle load pressure gauge including axle-load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the platform, 1x 40' container above the gooseneck, or 2x 20' containers * Support bracket with 1 pair of WADER container pockets, kingpin load approx. 20,000 kg * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm at the outer frame of the load platform * Galvanized extensions, extendable by approx. 230 mm per side * Movable hook-in rails for aluminium drive-on ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable guard for the pump * 2 LED reversing lights mounted at the rear * Acoustic reverse warning signal * HRM metallisation (High Resistance Metallisation)

Stanje: novo, največja dovoljena obremenitev: 33.865 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Our complete vehicle inventory with immediately and soon available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. Gooseneck * Gooseneck with chamfered front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Area * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) Ksdpfsw Tprzsx Aa Rowu * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood floor approx. 48 mm thick, chequered plate overlay above axles * Cut-outs in the loading area outer frame for attaching tension belts (LC 2,000 daN) Axles * BPW axles and suspension, all axles hydro-mechanically steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tools Tyres: * 245/70 R 17.5, load index (146/146 F) * Make of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox, lifting capacity approx. 24 t (approx. 50 t tested capacity) Brake system: * Brake system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paint finish: First class and durable corrosion protection * High-quality two-component (2K) single-colour top coat in RAL 3002 carmine red. * Rear section metallised and painted in RAL 9010 (pure white) Steel construction: Steel structure made of high-strength fine-grained steels. * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets, connection as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Hot-dip galvanised steel bulkhead, approx. 400 mm high * Yellow-red air couplings on the galvanised front terminal strip * Spare wheel carrier in front of the bulkhead * Electro-hydraulic power unit * Remote steering front and rear via cable remote control with push buttons, includes axle tracking control (without installation in tractor unit) * Recess at the rear of the gooseneck for aluminium approach ramps * Anchor rail for aluminium approach ramps at the rear of the vehicle * Galvanised folding supports under the loading area rear chamfer * Aluminium drop sides and rear board on the gooseneck, plug-in, approx. 2,440 x 400 mm (L x H) * Rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * One galvanised toolbox integrated in the chamfered gooseneck * 4 pairs of WADER container locks in the loading area for a 20', 2x 20', 40' or 45' container * 8 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the loading area outer frame * Galvanised extensions, extendable by approx. 230 mm per side * Sliding anchor rails for aluminium approach ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, using standard NLGI-2 grease and removable pump protection * 2 LED reversing lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation), complete steel structure shot-peened to SA2.5–SA3, then wit

Stanje: novo, največja dovoljena obremenitev: 39.720 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including immediately and short-term available units, can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * With beveled front corners, approx. 45°, and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area * Extendable loading area version * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of lashing rings laid flat at the front of the loading area (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing legs * JOST (mechanical) with two-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles * BPW axles, two fixed, two self-steering, with drum brakes * Air suspension with raise/lower function * Self-steering axle with electromagnetic reverse lock, activated by reverse gear or manually * Tyres: 205/65 R 17.5 Braking system * Wabco braking system meeting EU regulations with EBS-E (4S3M), without interconnection lines to the tractor unit Steel Construction * Made from high-tensile fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, long-lasting corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer * High-grade, single-color two-component (2K) topcoat in RAL 3002 Carmine Red * Rear section metallized and finished in RAL 9010 (Pure White) * Wheels in silver Accessories included * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on galvanized front connection rail * 4 wheel chocks with holder on the front wall Kwsdpfxsu Sd U Us Aa Rju * Rear section of the gooseneck with mounting for aluminium ramps * Galvanized folding supports under the rear bevel of the loading area * Bracket for a beacon on the trailer’s rear * Yellow reflective tape on the sides, extension, and rear, in compliance with EU regulations * Holders for warning signs with socket on left and right of gooseneck and rear panel * TPMS tire pressure monitoring system according to ECE R 141. Data transfer to the towing vehicle is via the standardized EBS interface per ISO 11992; for correct display the towing vehicle must be able to receive and display the data * On the gooseneck: clip-on aluminium side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * One galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding brackets for aluminium ramps at the vehicle’s rear * 7 pairs of stake pockets for removable stakes, approx. 100 x 50 mm in the outer frame of the loading area * One galvanized transverse holder under the loading area * Galvanized, extendable outriggers for widening by approx. 230 mm per side * Lift axle on the front axle controlled by TEBS E depending on current axle load and loading condition * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)