Drugo Delovna Platforma nakup rabljenega (68)

Stanje: rabljeno, največja dovoljena obremenitev: 14.150 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2023, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 3.100 mm, skupna širina: 2.500 mm, skupna višina: 2.155 mm, Leto izdelave: 2023, Oprema: ABS, Skoraj nova platformna prikolica letnik 2023 od prvega lastnika, višina nakladalnega roba 0,90 cm, po dogovoru z MAN platformno prikolico / keson letnik 2019, prevoženih le 498.000 km, 18.460 popolnoma opremljena, cena 54.980,00 neto. Prodaja samo trgovcem in podjetjem. Brez odgovornosti za napake pri pisanju ali v oglasu. Vse informacije so brez garancije. Prodaja do predhodne prodaje pridržana. Ksdpfx Adsxq Uhhs Asdw

Stanje: novo, največja dovoljena obremenitev: 38.900 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T5 profile 50.0: * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Last axle steering (axle lock for manoeuvring can be activated from the cab without additional truck-side installation, and additionally via a switch on the trailer); the lock must be disengaged before driving on public roads * Air suspension, lift and lowering system with RtR valve * 3rd axle liftable (ride height +30 mm with lifted axle) * Forced relief and forced lowering of the lift axle for manoeuvring (requires truck-side installation), speed-dependent activation via EBS * Smartboard infotool with pressure sensors for total axle load display per axle group * TPMS with display option in the truck via EBS signal (no truck-side installation required) * Mechanical warning sign kit for 3m total width * Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment * LED lighting system 12/24 V * Removable rear LED beacon * Toolbox, galvanised steel approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle, galvanised steel mud guards rear axle * Turntable platform extension with 45° corners and 3 storage compartments with lockable folding lids (lids open to rear) * Shortened low-loader deck by 500 mm to 6,280 mm incl. extended step by 500 mm to the front * Load securing package: 2 x 6.4 t lashing rings front corners, side front & rear corners each 2 x 13.4 t UVV lashing rings, 5 x 10 t UVV lashing rings per side (pivoting/lowering and loadable in all directions), 4 stake pockets per side additionally providing 2 t lashing option, 1 x 16 t UVV lashing ring on rear traverse * Rubber matting on folding ramp, approach slope, and low loader running surface * Bamboo wood inserted between main beams in excavator arm storage area * Extendable and folding outrigger extensions for 3 m total width (beam holder under chassis, right side) * Continuous excavator arm storage with reinforcement profile from last axle to rear cross member approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on sides Kjdsxptn Depfx Ad Aodw * Hydraulic folding ramp with dual-line hydraulics and extendable tip section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift * Hydraulic rear support * Hydraulic flow divider (for truck hydraulic capacity over 40 l/min up to 140 l/min) * Loaded platform height 890 mm +/- 20 mm (via air suspension) * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach ramp * Chassis, turntable, drawbar, extension consoles, and access ramps hot-dip galvanised * Drawbar, axles, hydraulic axle supports, and air tanks painted black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 14/2026

Stanje: rabljeno, največja dovoljena obremenitev: 7.500 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 06/2020, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Overall length: 9,150 mm Loading length: approx. 7,300 mm Width: total width 2,550 mm / loading width approx. 2,480 mm Loading height: approx. 900 mm Further information: - Internal loading height: 2,700 mm - Fine-grained steel welded construction - Slightly angled outer frame with "Load-Lock profile" for lashing strap attachment - 2-speed landing gear at the front - Foldable rear support - Steel underride protection - Quarter shell mudguards Kjdpfexqvyfox Ad Ajdw - Rear impact guard - Drawbar height-adjustable via spindle - GFA axles with tapered roller bearings and S-cam brakes - Air suspension - 2-line compressed air braking system / lifting-lowering valve - Anti-slip plywood flooring, approx. 30 mm thick, designed for high point loads - 2,580 mm high, steel corner stanchions for high-volume design, release mechanism for side curtain at front bulkhead - 1 pair of adjustable sliding stanchions along the entire length, with 4 insert pockets each and long pocket at the bottom - Rear corner stanchions steel up to underside of roof, curtain attachment with round tube and tensioning ratchet - Rear portal doors, double-wing with 2 internal locking rods each - Curtain with welded-in horizontal and vertical belts, tension locks made of stainless steel - Solid roof with curtain and bows Curtain can be provided with advertising stickers and/or lettering. New curtain available upon request.

Stanje: rabljeno, največja dovoljena obremenitev: 13.860 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2022, dolžina tovornega prostora: 6.770 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 600 mm, prostornina tovornega prostora: 10 m³, Oprema: ABS, ? pocinkano podvozje ? nizko sklopljen ? vlečno oko 50 mm ? zaklep za kontejner ? po 12 pritrdilnih obročev na vsaki strani ? vzvratna kamera Kdjdpfxexb Ig Se Ad Aew ? bobnaste zavore ? duomatski priključek ? ABS ? zračno vzmetenje ? orodjarna ? EBS ? podporne noge ? dvojna kolesa ? BPW osi Vse informacije brez garancije / Vmesna prodaja pridržana.

Stanje: rabljeno, največja dovoljena obremenitev: 4.930 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 03/2022, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 1.990 mm, skupna širina: 2.545 mm, skupna višina: 2.850 mm, Errors and prior sale excepted! Internal number: 1457. 1083677 Kdjdpfxowtvvne Ad Aow --- Please refer to the photos for equipment and condition. --- The vehicle is in unprepared (as-is) condition! Nationwide delivery available at additional cost. Errors and prior sale excepted. We are happy to accept your vehicle as a trade-in. Financing / leasing available with no down payment required! Do you have any further questions? We are happy to advise you!

Stanje: rabljeno, konfiguracija osi: 1 os, prva registracija: 04/2010, naslednji pregled (TÜV): 07/2024, dolžina tovornega prostora: 2.550 mm, širina tovornega prostora: 1.300 mm, višina nakladalnega prostora: 350 mm, vzmetenje: drugo, barva: srebrn, Leto izdelave: 2009, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Used machine transporter with loading ramp and excavator bucket rest, Manufacturer: Hapert, Model: HV 1350, Dimensions: 2550 x 1300 x 350 mm (L x W x H), Gross vehicle weight: 1350 kg, Unladen weight: approx. 672 kg, Payload: approx. 678 kg (payload may vary depending on equipment and configuration), excavator bucket rest, high standing loading ramp, aluminium treadplate floor, 4 robust lashing points, walkable mudguards, shock absorbers incl. 100 km/h approval, heavy-duty automatic jockey wheel, mud flaps, first registration: 09.04.2010, workshop inspected, new roadworthiness certificate available on request, good condition. Kedsq Dqz Uopfx Ad Asdw Possible options and accessories for this trailer: spare wheel incl. bracket, anti-theft device, registration of your new trailer at the vehicle registration office. We are happy to show you how you can finance your new trailer in convenient monthly instalments and will prepare a tailored financing offer for you. We have more than 2,000 trailers in stock at all times. You can find a large selection of our trailers online or visit us in Horn-Bad Meinberg – we look forward to seeing you! Images may show accessories not included in the standard scope of delivery. Due to continuous development, images and technical data may vary slightly. Errors and changes excepted.

Stanje: novo, največja dovoljena obremenitev: 2.110 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.050 mm, širina tovornega prostora: 1.550 mm, višina nakladalnega prostora: 200 mm, B27300/150 MACHINE TRANSPORTER TECHNICAL DATA * Trailer type: B27300/150 * Gross vehicle weight: 2,700 kg * Payload: 2,075 kg * Internal dimensions: L: 305 cm, W: 155 cm, H: 20 cm * Loading height: approx. 54 cm * Floor: multiplex wooden floor * Integrated lashing points recessed in the loading floor * Side walls: steel * Frame: welded steel, hot-dip galvanized by immersion * Electrics: 13-pin, 12V * Tyres: 185R14C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axles * Standard jockey wheel * Walkable steel mudguards * Shovel holder * Rear support stands * Loading ramps – 200 cm plus vehicle registration document/COC certificate €39.00 All prices include VAT. Images may not correspond to the standard equipment. Technical changes (e.g. tyre sizes) reserved. Delivery: Delivery by forwarding agent possible, €1.50 per transport kilometre one-way throughout Germany (from Seesen to the destination), at least €270 plus VAT. Visit us also at Here you can also order your desired trailer and accessories upon request: BLYSS Transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: BLYSS Transporttechnik GmbH Burenkamp 18-20 46286 Dorsten - Wulfen Tel.: FINANCING OR LEASING POSSIBLE* Vehicle number (for customer inquiries) Ksdjthlrhepfx Ad Asdw Images may not correspond to standard equipment. Technical changes (e.g. tyre sizes) reserved.

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * RDÜ (tyre pressure monitoring system) * Drum brakes * 3 x 11 t Gigant axles Kdedpfxepk D Awo Ad Aow * Air suspension with manual rear lowering * Mid-axle liftable * Pneumatically lowerable drawbar, 2,100 mm long with 50 mm towing eye & height adjustment device * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right side * Side and rear contour marking tape, reflective * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact bumpers * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with roller recesses in bogie area * For roll-off container transport, container lengths from 5,500 – 7,000 mm possible * Pneumatic 4-point clamp locking and mechanically insertable stop angles at front in guide rails * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * 8 relocatable skip stops for lateral centering of skips, front 4 stops plug-in with pivoting restrictor * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning devices for positive and friction-locked securing of the skips * 4 lashing bars each in clover-leaf design (side) and 1 pair of 13.4 t UVV lashing rings at front * Load securing certification according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Weld bead as anti-slip coating in the running rail area of the ramp * Mechanical drop supports at rear * 1 pair of aluminium loading ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) * Tyres: 235/75 R17.5 * Loaded ride height approx. 1,003 mm * Payload 18,900 kg * Gross vehicle weight technically possible up to 27,000 kg * Axles, turntable, drawbar and air tanks painted in black * New vehicle without first registration, including manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 50/2025

Stanje: rabljeno, največja dovoljena obremenitev: 14.170 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2006, dolžina tovornega prostora: 6.530 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.550 mm, Skupna masa: 18.000 kg Kdjdpew N A Eysfx Ad Ajw Lastna masa: 3.830 kg Nosilnost: 14.170 kg Skupna dolžina: 8.550 mm Dolžina nakladanja: 6.530 mm Širina: skupna širina 2.550 mm / širina nakladanja 2.540 mm Višina nakladanja: pribl. 1.000 mm Dodatne informacije - Tla iz trdega lesa z Omega profili - Stranske stranice prisotne - Dvojna kolesa - BPW osi - Prstani za privezovanje - LED vzvratne luči

Stanje: rabljeno, največja dovoljena obremenitev: 15.250 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2007, ? Balastna platforma ? 50 mm vlečna kljuka ? 5 x pritrdilna ušesa Kjdpfxsw Sqi Ee Ad Ajdw ? Bobnaste zavore ? Listnato vzmetenje ? Podporne noge ? BPW osi Vsi podatki brez garancije / vmesna prodaja pridržana.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2018, dolžina tovornega prostora: 6.060 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 300 mm, Errors and prior sale excepted! Internal number: 1448. EQUIPMENT * Flatbed trailer * 3 axles * Jockey wheel * AL-KO coupling * Side planks all around ... and much more. ----The vehicle is offered in unrefurbished condition! Nationwide delivery available for an additional charge. Errors and prior sale excepted. We are happy to take your vehicle in trade-in. Financing / leasing possible even without down payment! Do you have further questions? We are happy to advise you! Kdsdpfx Adsvwh U Ss Ajw

Stanje: rabljeno, največja dovoljena obremenitev: 12.100 kg, skupna masa: 16.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2011, naslednji pregled (TÜV): 12/2024, dolžina tovornega prostora: 7.400 mm, širina tovornega prostora: 2.500 mm, Oprema: ABS, * ABS * Rotating beacon, orange * Duomatic air coupling Kdsdpfx Adsvy Nw To Ajw * 5-chamber rear lights * Front landing gear * BPW ECO axles ----Body: Open platform (loading height approx. 950 mm), hardwood floor, rear extendable by 1,685 mm, 4 pairs of extendable container locks (twist locks), stainless steel toolboxes. Sale exclusively to business customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT & ACCESSORIES. Our General Terms and Conditions (see Legal Notice) form the basis of all purchase agreements, invoices, pro forma invoices, orders, and sales discussions.

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14.4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing unit * Tire pressure monitoring system with display capability in the truck via EBS signal, no truck-side installation required * Height-adjustable towing bar (up to 300 mm) with 40 mm flange towing eye * Mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * 15-pin electrical connector * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks on the sides and rear in the central locking mounts, plus two on the front wall Kdodpfxjtr St Hj Ad Asw * Main frame made of fine-grained steel * Steel pallet tipper body with rigid front wall made of smooth plate, continuous side walls – foldable without intermediate stakes, with drop side spring assist and with pendulum function via manual central locking * Bolted rear stanchions * Steel rear wall inserted in front of the ramps * Each corner with 1 x 5 t lashing point, plus 4 x 3 t lashing rings recessed in the outer frame on each side * 4 mm floor made of fine-grained steel * Two-part mechanical grid ramps with aluminum tip, 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm) * Chassis, drawbar, rear stanchions, underrun protection, mechanical drop supports, as well as ramps, hot-dip galvanized * Axles, springs, air reservoir, flange towing eye and landing gear painted in black tone * Side walls and platform in RAL 9010 pure white * Painting of side walls and tipping platform in a RAL color of choice available at extra cost * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 07/2026

Stanje: rabljeno, največja dovoljena obremenitev: 15.250 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 12/2008, ? Platform for ballast weights ? 50 mm towing eye ? 4 x lashing eyes ? Drum brake ? Leaf suspension ? Support legs Kjdpfxowfk R De Ad Aedw ? BPW axles All information without guarantee / subject to prior sale.

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: * Tire Pressure Monitoring System (TPMS) * EBS (Electronic Braking System) Kdsdpfxev D Tbke Ad Asw * Emergency Release Device for Spring Brake Cylinders * Drum Brakes * 2 x 7 t BPW Axles * Air Suspension with Lifting and Lowering System * Mechanically Adjustable 3 m Warning Sign Boards at Front and Rear * Towbar Height Adjustable by 300 mm, with 40 mm Flange Eye * Drawbar Shortened by approx. 200 mm to approx. 1,800 mm (Resulting in a B-Dimension of approx. 8,080 mm) * Front Landing Leg * Outward Folding Rear Support Legs * Plastic Toolboxes approx. 750 x 350 x 300 mm each, mounted on both the left and right sides * Side Impact Protection * Rear Underrun Protection * Plastic Quarter Mudguards * 15-Pin Electrical Socket * LED Lighting System 12 / 24 V * 2 Additional LED Reversing Lights at Rear (controlled via reverse gear) * 1 Removable LED Beacon (including bracket) at the rear * 400 mm high bolted front wall * 50 mm Softwood Floor * 2 Pairs of Container Locks (extendable to 3 m container external width) and lockable, locking dimension retracted per ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) for an overall external width of 3,000 mm * Perforated outer frame bent at approx. 45° with 2 t lashing capacity every 480 mm, installation of 3 t folding lashing rings possible every 600 mm – with 5 x 3 t UVV lashing rings fitted per side –, in each front and rear corner 1 x 6.3 t lashing ring (front, directly behind the container locks in the timber floor, and rear in the end cross member), various holes for 1.2 t lashing options in the front and rear cross members * 1 Pair of Aluminium Slide-In Ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment integrated into the chassis beneath the loading area * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tanks, front landing leg, and flange tow eye painted in black * New vehicle with manufacturer’s warranty * Subject to prior sale and errors * Available from calendar week 09/2026

Stanje: rabljeno, največja dovoljena obremenitev: 15.150 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/1994, ? Platforma za balastne uteži ? 50 mm vlečna očesca Kdodpfx Adsw Sqile Asw ? 4 x pritrdilna očesa ? Bobnasta zavora ? Listnato vzmetenje ? Podporna stojala ? SAF osi Vsi podatki brez garancije / Vmesna prodaja pridržana.

Stanje: novo, največja dovoljena obremenitev: 30.500 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Tire pressure monitoring with display capability in the truck via EBS signal - no on-truck installation required * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord infotool mounted with pressure sensors for total axle load display per axle group * Reflective contour tape on the sides and rear * Removable LED beacon at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front closed individual plastic mudguards * Rear straight steel mud flaps each with spray suppression * Lateral underrun protection * Front section ahead of the turntable platform extended approx. 520 mm with 45° corners and 3 storage compartments incl. lockable folding lids (folding lids open to the rear) * Chassis made of high-strength fine-grained steel * Floor over the turntable platform made of 50 mm and in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing rings 6.4 t front left and right on the main frame of the turntable platform, 1 pair of 13.4 t lashing rings per side at the front and rear on the outer frame, plus 1 pair of 10 t lashing rings per side swivel- and lowerable, loadable in all directions and recessed in the outer frame, bolted 5 t lashing rings to the outer frames of wheel recesses (2 for the front and 1 for the rear wheel recess), 2 pairs of 6.4 t lashing rings at the side in the excavator arm recess * 11 pairs of folding outriggers for 3 m overall width (not at the rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the extension boards made of sheet steel, mounted across the loading area in front of the 1st rear axle * Excavator arm trough above the rear axle to the end of the approach slope approx. 2,300 x 740 x 190 mm * 2 wheel recesses per side, approx. 640 mm wide - front 340 mm deep, rear 220 mm deep - with retractable cover (storage for covers at the front of the turntable platform) for transporting wheel loaders with a wheelbase of 3,100 - 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip part approx. 4,650 x 720 mm Kjdpfxoxmpydj Ad Ajdw * Hydraulic lateral ramp shift * Load platform above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded platform height approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, turntable, folding outriggers, rear drop-down supports and loading ramps hot-dip galvanized * Axles, air tanks, and drawbar painted in black * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from CW 14/2026 * Sample images

Stanje: rabljeno, največja dovoljena obremenitev: 7.200 kg, skupna masa: 9.000 kg, konfiguracija osi: 1 os, prva registracija: 03/2008, - Platform for ballast weights Kdodpswfku Ajfx Ad Aow - 40 mm towing eye - 9 lashing rings - Drum brakes - Leaf suspension - Support legs - BPW axles All information subject to change / Prior sale reserved.

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tyre pressure monitoring system * Emergency release unit for spring-actuated brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting/lowering system and RtR valve * Smard on-board weight measurement system * Warning sign packages front & rear Kdodpfxel Tik Ne Ad Aew * Reflective contour tape on sides and rear * Removable rotating beacon at the rear * LED lighting * Straight drawbar with 50 mm towing eye and infinitely height-adjustable * Tool box made of powder-coated steel sheet and basket-type spare wheel holder, right-hand side * Front closed individual plastic fenders * Rear straight steel spray guards with spray suppression * Lateral underrun protection * Turntable platform front extension by 520 mm with 45° corners and 3 recessed lockable storage compartments incl. covers * Chassis made of high-strength fine-grained steel * Turntable platform floor made of 50 mm and low-bed platform of 60 mm softwood * Outer planks of the drive-on ramps made of hardwood * Four stake pockets per side (stakes not included) and 2 t lashing point each * Lashing package comprising: Two 6.4 t lashing rings front left & right on the main frame of the turntable platform * Two pairs 13.4 t lashing rings at outer frame, front and rear, and four pairs per side 10 t lashing rings, swivel and height adjustable * Loadable in all directions and recessed into the outer frame * Two pairs 6.4 t lashing rings in the excavator arm rest area * Eight pairs galvanized folding outriggers for 3 m overall width (not in rear slope area) * Extension boards stored in a compartment on the left side * Excavator arm rest area above rear axle up to end of access ramp approx. 2,100 x 740 x 190 mm * Mechanical rear drop-down supports * Hydraulic folding ramps with hydraulically extendable ramp tips approx. 4,650 x 720 mm incl. hydraulic side-shifting ramps & load-holding valve * Deck area above slewing ring: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, turntable, drive-on ramps, folding outriggers, and mechanical drop-down supports hot-dip galvanized * Axles, drawbar, air tank, and slewing ring painted black * Tyres 235/75 R 17.5 * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale * Available from CW 07/2025

Stanje: novo, največja dovoljena obremenitev: 20.200 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 flatbed: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lifting and lowering function and RTR feature * 1st axle liftable * Last axle as trailing steering axle with electro-pneumatic steering lock triggered via reverse gear pin (lock of the trailing axle from the towing vehicle for shunting purposes – no truck-side installation required – assigned to PIN 10 in the 15-pin connector, for shunting only, not for public road traffic) * SmartBoard control box as information tool with pressure sensors for total axle load indication * Tire pressure monitoring with display option in the truck via EBS signal, no truck-side installation required * Fixed center drawbar with 50 mm flange eye (loaded 900 mm, mm height adjustment at the head plate) * Mechanical landing gear at the front, mechanical swing-down supports at the rear of the chassis * Hydraulic flow divider * Continuous side walls (without center stanchion) up to the loading slope * Foldable rear stanchions * Steel tailboard inserted in front of the rear stanchions * Mechanically adjustable warning sign package front and rear * Toolboxes made of galvanized sheet steel - black powder-coated - approx. 650 x 300 x 600 mm, mounted on the right side * 15-pin power connector * LED taillights * Removable LED beacon including bracket and installation * 2 x LED reversing lights at the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir timber floor * 400 mm plug-in steel front wall * Perforated outer frame, bent approx. 45 degrees with fixture for mounting 3 t folding lashing rings * In each corner: 1 x 10 t lashing ring; additionally, 2 x 10 t and 3 x 6.3 t lashing rings on each side * Various boreholes in front and end beams for 1.2 t lashing options * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-way hydraulic control block for optional retrofitting of hydraulic ramp shift Kdedpfxor Dpzxs Ad Ajw * Chassis, drawbar, front wall, mechanical rear supports, loading ramps hot-dip galvanized * Axles, air tanks, flange eye and front landing gear painted in black tone * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 l/min up to 120 l/min) * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from week 13/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, * TS 3 RM ML 30.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW axles * Air suspension with lifting and lowering function as well as RtR valve * Traction aid for shunting purposes switched to the first axle via EBS (no installation required on the truck side) * Smart-Board mounted as an information tool on the trailer with pressure sensors for total axle load display * Last axle as self-steering axle with electro-pneumatic steering lock * Steering lock for self-steering axle can be activated from the driver's cab for shunting purposes via EBS (no installation required on the truck side) * 2nd king pin position 2 * Side underrun protection, landing gear at the front and swinging support legs at the rear of the chassis * 15-pin electrical connector * LED lighting 12/24 V * LED beacon (removable) at rear * 2 additional LED reversing lights * 7-pin socket at the rear for oversized load lighting * Side marker lights with indicator control Kedpfx Adsq Euakj Aodw * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on the truck side) * Mechanically adjustable warning plate packages at front and rear * Straight steel sheet mudguards * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Gooseneck platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated steel sheet, W=2,480 x H=500 x L=665 mm, with hinged lid * 400 mm drop-side aluminum boards on the sides of the gooseneck platform (RAL color of choice), foldable and removable * Rear wall inserted at 150 mm height * Rear slope on the gooseneck platform to the lowbed approx. 700 mm long with checker plate covering; hole strip at the end for hooking in aluminum drive-on ramps * Gooseneck platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9x manual fold-out extensions up to 3 m total width, but not in rear slope (extending boards present with closed storage box fitted transverse to the direction of travel under the loading area) * 3 mounting shafts under the gooseneck platform for storage of optional aluminum ramps or wooden planks for wheel well covering * Pivoting arm as a carrier for connection lines from the truck to the trailer * Load securing package consisting of: gooseneck platform with perforated outer frame, 45° angled, hole pattern for lashing devices (2 t lashing capacity per lashing point with minimum spacing of 480 mm) * Each side with 3 x 13.4 t recessed lashing rings in the floor (1x on the gooseneck platform, 1x on longitudinal frame after camber, 1x over the center axle next to the longitudinal frame) * Each side with 3 x 13.4 t lashing rings on outer frame (1x start of gooseneck camber, 1x beginning of ramp, 1x end of ramp) * Each side with 2 x 10 t lashing rings (1x between front wheel well and first axle, 1x between second and third axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 on the front, 1 on the rear wheel well) * Extended excavator boom trough from end of last rigid axle over steering axle to the end cross member, continuously with internal reinforcement profile approx. W=770 mm x Depth rear=270 mm / Depth front=170 mm, each side with 2 x 6.4 t lashing rings in the excavator boom trough * Each side with 2 wheel wells, 390 mm deep and 640 mm wide, for transporting wheel loaders with a

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2025, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning signs front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash protection * Reflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system Kdjdpol Thxdsfx Ad Asw * LED tail lights * Removable revolving beacon at the rear * Drawbar with 40 mm towing eye, height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included) with additional lashing points * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant drop-down and swiveling lashing rings, loadable in all directions and recessed into the outer frame – load capacity in corners 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3-meter total width (not in the rear taper) * Widening planks stored in the center of the loading area * Excavator arm trough above rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides in the excavator trough) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Loading area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --technically permissible total weight 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from CW 38/2025

Stanje: novo, največja dovoljena obremenitev: 24.020 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2025, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Swing-down supports at rear of chassis frame * Mechanically adjustable warning sign sets front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Contour marking tape, reflective on sides and rear * Toolbox made of galvanized sheet steel (black powder-coated), approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage electrical system * LED tail lights * Rotating beacon (removable) at rear * Drawbar with 50 mm towing eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * Four stake pockets on each side (stakes not included), doubling as lashing points * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 6 pairs of UVV-certified lashing rings, pivoting and retractable, loadable in all directions and recessed into the outer frame – in the corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding extensions for 3 m overall width (not in the rear taper) * Widening planks stored in the center of the load area * One-piece hot-dip galvanized hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control valve block for retrofitting hydraulic lateral ramp shift * Load area over fifth wheel: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. coated in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight Ksdpfx Asl Th I Aed Asdw * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from calendar week 44 / 2025

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: * TPMS (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 5.5 t Gigant axle system * Parabolic springs with compensation unit Kdsdpfx Adol Thy Ro Ajw * Drawbar height-adjustable by approx. 300 mm * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * 50 mm softwood floor * Provisions for retrofitting 20" container locks at the front and rear * Bolted, smooth sheet metal front wall * Sidewalls made of profiled steel sheeting, foldable, with drop-side lifting springs * Bolted, hot-dip galvanized rear stakes * Perforated outer frame approx. 45 degrees edged, with 2 t lashing capacity every 480 mm * Preparation for 3 t folding lashing rings every 600 mm (five lashing rings installed on each side) * One 6.3 t lashing ring at each front and rear corner * Various holes in the front and rear crossmember for 1.2 t lashing points * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear-access storage compartment integrated under the loading bed in the chassis * Sideboard color RAL 9010 pure white * Painting of the side panels in a RAL color of your choice available at extra cost * New vehicle, not registered * Errors and prior sale excepted * Available from week 48 / 2025

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11-tonne Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tyre pressure monitoring with display option in truck via EBS signal (without truck-side installation) * Warning sign package front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear Kjdorczm Depfx Ad Aodw * 24 V - 15-pin and additionally 12 V - 7+4-pin power cable * Extended connection cables for agricultural and forestry towing vehicles * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height setting * Tool box made of powder-coated sheet steel and spare wheel carrier in basket design, right side * Closed single plastic mudguards at the front * Straight steel mudflaps at the rear, each with spray protection (spray suppression) * Side underrun protection * Extended offset cranking by 500 mm to the front * Turntable platform extended by 520 mm at the front with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grain steel * Flooring over turntable platform made of 50 mm softwood and in low-loader platform made of 60 mm softwood * Outer planks of the access ramps made of 50 mm bamboo * Four stanchion pockets each side (no stanchions included), each with 2 t lashing option * Load securing package consisting of: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform, 1 pair of 13.4 t lashing rings each side front and rear on the outer frame, 4 pairs of 10 t lashing rings per side, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 2 pairs of 6.4 t lashing rings per side in excavator boom rest, 8 pairs of galvanized folding outriggers for 3 m total width (not on the rear slope) * Widening planks stored in a side locker on the left * Excavator boom rest over rear axle up to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at the rear * Hydraulic hot-dip galvanized access ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp adjustment on sliding tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded loading height approx. 860 mm (incl. 860 mm approach slope) * Chassis, turntable, access ramps, mechanical folding supports rear hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer‘s warranty * Subject to errors and prior sale * Available from week 46 / 2025