Meusburger 3-Achs-Tele-Semi-1P. Radmul.-Hydr.rampen nakup rabljenega (46.050)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
Meusburger3-Achs-Tele-Semi-1P. Radmul.-hydr.Rampen
Pokliči
Stanje: novo, lastna masa: 9.800 kg, največja dovoljena obremenitev: 39.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 9.800 kg, Oprema: ABS, Chassis:
- Robust welded steel frame construction with a front frame dip and flat loading platform featuring a rear bevel approx. 500x100 mm
- Frame neck 200 mm with chamfered corners at the front
- Sloped swan neck end approx. 500 x 100 mm (with anti-slip profile strips on outer frame in the area behind the rear bevel)
- 2 king pin positions with replaceable 2” king pin
- Outer frame closed to the outside and designed as perforated outer frame
- Loading platform with extendable central frame, extendable by around 2,000 mm, lockable in 500 mm increments pneumatically
- Frame with 80x80 mm step at and after extension joint
- Reinforced frame design / maximum point load when retracted at center of gravity
- Without extendible load platform outriggers, but pre-fabricated to allow retrofit (= guide tubes welded in frame)
- With excavator trough (no cover), approx. 220 mm deep, 600 mm wide, starting behind 2nd axle to vehicle end
- 1 pair of wheel wells between 1st and 2nd axles, covered with steel plates (covers with Körapur coating), approx. 400 mm deep
- Rear underrun protection = extended rear plate
- Drop-down supports at the rear
Ramps:
- 2 two-piece loading ramps, special design with mechanical extension
- Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only with electro-hydraulic unit)
- Width approx. 800 mm
- Wooden surfacing
- Including anti-slip strips on ramps
- Can be locked in transport position with tie-down straps
- Operated by control lever mounted on rear right in frame
- Hydraulically laterally adjustable
Floor:
- 35 mm larch wood floor with aluminium omega profiles
Landing legs:
- Mechanical 24-ton landing legs with single-sided operation and compensating device
Axles, steering and tires:
- BPW air suspension axles, each with 10-ton axle load, air bellows diameter 360 mm
- S-cam brakes 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- Lifting and lowering system with total lift approx. 200 mm
- 2nd driving position via ball valve +50 mm
- 1st axle lift axle (wired through EBS), automatic control, with manual override button on the trailer
Gedpfxsxgm S Do Apbjub
- 3rd axle as friction-steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, center offset by center bore
- 12 tires, 245/70 R 17.5 143/141J, tubeless
- Including tire pressure monitoring system
Accessories:
- Insertable side and rear stakeboards on the swan neck, approx. 400 mm high
- Spare wheel carrier
- Side aluminium underrun protection
- 4 chocks
- 1 plug-in ECE rear warning board
- 11 pairs of ZK modules 10t, lateral:
- 2x on the swan neck
- 2x on loading area before extension
- 7x after extension
- Extendable warning signs including 3 position lamps each, at the front on landing legs and rear before the rear plate, steplessly extendable up to 4,500 mm loading width
- 4 plug-in sockets for warning signs in stake pockets on the loading platform
- 6 pairs of stake pockets laterally for 100x50 mm stakes
- 2 cross rows stake pockets for 100x50 mm stakes on swan neck, from outer frame to main frame (1x before/1x after king pin positions)
- 3 cross rows stake pockets for 100x50 mm stakes on loading area from outer frame to main frame (1x before the extension, 1x after extension, 1x after the 3rd axle)
- 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container
- Rubber apron mounted on underrun protection
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
Meusburger3-Achs-Tele-Semi 1P. Radmul.-Federhebew.
Pokliči
Stanje: novo, lastna masa: 9.400 kg, največja dovoljena obremenitev: 39.600 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 9.400 kg, Oprema: ABS, Chassis:
- Robust welded steel frame construction with a front frame depression and flat loading platform, rear taper approx. 500x100 mm
- Gooseneck height 200 mm with beveled corners at the front
- Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel)
- 2 king pin positions with replaceable 2" king pin
- Outer frame closed outward, punch-hole design
- Loading platform with extendable central frame, can be extended approx. 2,000 mm in increments of 500 mm, pneumatically lockable
- Step 80x80 mm in the frame before and after the division
- Reinforced frame version / point load in retracted position at center of gravity
Gusdpfoxnym Djx Apbsb
- With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle to vehicle end
- 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm
- Underrun protection = extended rear plate
- Drop leg supports at the rear
Ramps:
- 2 single-piece aluminum ramps, special version with spring-assisted lifting
- Length x width approx. 2,500 mm x 600 mm
- Lockable in transit position with lashing straps
- Manually adjustable sideways
Axles, Steering and Tyres:
- BPW air suspension axles, each with 10 t axle load, airbag diameter 360 mm
- S-cam brakes 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- Lifting and lowering device with a total lift of approx. 200 mm
- 2nd ride height via ball valve +50 mm
- 1st axle as lift axle (wired via EBS), fully automatic activation with manual emergency actuation via button on semi-trailer
- 3rd axle as self-steering trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, center-offset
- 12 tyres 245/70 R 17.5 143/141J, tubeless
- Tyre pressure monitoring included
Floor:
- 35 mm larch wood floor with aluminum omega profiles
Landing Gear:
- Mechanical 24 t landing gear with single-side operation and compensating support
Paintwork:
- Steel grit-blasted, spray-galvanized chassis and primed
- Chassis/wheel hubs/outer frame painted in DB 7350 Novagrey
- Reflective side and rear stripes in yellow
Accessories:
- Plug-in side and rear panels on gooseneck, approx. 400 mm high
- Spare wheel holder
- Lateral aluminum underrun protection
- 4 chocks with holders
- Elongated license plate holder in rear plate
- 1 ECE panel at the rear, plug-in
- 11 pairs ZK modules 10t, side-mounted:
- 2x on gooseneck
- 2x on loading platform before extension
- 7x after extension
- Extendable warning signs incl. 3 position lights each, at front landing gear and before rear plate, infinitely extendable up to load width 4,500 mm
- 4 holders for warning signs, plug-in to stake pockets on loading platform
- 6 pairs of lateral stake pockets for 100x50 mm plug-in stakes
- 2 cross rows of stake pockets for 100x50 mm plug-in stakes on gooseneck from outer frame inwards to main frame (1x before and 1x after king pin positions)
- 3 cross rows of stake pockets for 100x50 mm plug-in stakes on loading platform from outer frame inwards to main frame (1x before extension, 1x after extension and 1x after 3rd axle)
- 2 pairs of steel plates in loading platform for container locks to accommodate 1x 20ft container
- Rubber apron mounted to underrun protection
Mali oglas
Dortmund
815 km
Polpriklopnik z nizko nakladalno ploščadjo
Meusburger3-Achs-Tele-Semi mit 1 Paar Radmulden
Pokliči
Stanje: rabljeno, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report.
Chassis:
-Robust steel frame welded construction with front frame drop and flat cargo bed with rear taper approx. 500x100 mm
-Frame neck 200 mm with beveled front corners
-Tapered rear end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in rear taper area)
-2 king pin positions with replaceable 2” king pin
-Outer frame closed to the outside as hole profile outer frame
-Cargo bed with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm
-Frame before and after extension with 80x80 mm step
-Reinforced frame design / point load support in retracted position at center of gravity
-Without extendable widening sections in the cargo bed, but prepared for retrofitting (= guide tubes welded into the frame)
-With excavator recess (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to rear end of vehicle
-1 pair of wheel recesses between 1st and 2nd axles with steel covers (covers with Körapur coating), depth approx. 400 mm
-Underrun protection = extended rear plate
-Drop support legs at rear
Floor:
-35 mm larch wood floor with aluminum omega profiles
Axles, Steering and Tires:
-BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm
-S-cam brakes 300/200 mm, asbestos-free brake pads
-Automatic slack adjuster
-Lift-and-lower system with total lift approx. 200 mm
-2nd ride height via ball valve +50mm
-1st axle is a lift axle (wired via EBS), confirmation fully automatic with mechanical emergency activation via push button on the trailer
-3rd axle is a friction-steered trailing axle with electric and mechanical lock
-12 steel disc wheels, 10-hole, centrally offset
-12 tires 245/70 R 17.5 143/141J, tubeless
-Including tire pressure monitoring
Accessories:
-Removable drop sides and rear wall on the gooseneck, approx. 400 mm high
-Spare wheel holder
-Lateral aluminum side underrun protection
-4 wheel chocks with bracket
-Elongated license plate holder in the rear plate
-1 plug-in ECE sign at rear
-11 pairs of 10t lashing modules at the sides:
2x on gooseneck
Guodpfx Aeywv Ixopbjb
2x on cargo bed in front of the extension
7x after extension
-Without rear towing eyes
-Extendable warning boards incl. 3 position lights each, front at landing gear and rear in front of rear plate, steplessly extendable to a load width of 4,500 mm
-4 holders for warning boards, insertable in stake pockets on the cargo bed
-6 pairs of side stake pockets for plug-in stakes 100x50 mm
-2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions)
-3 rows of transverse stake pockets for plug-in stakes 100x50 mm on cargo bed from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle)
-2 pairs of steel plates in the cargo bed for container locks to accommodate 1x 20ft container
-Rubber apron mounted on underrun protection
-Prepared (= cable routing for NATO cable and hole pattern for retrofit mounting of NATO socket in front section of rear plate as well as bracket on vehicle) for retrofitting electrohydraulic power pack on right rear in driving direction for potential operation of loading ramps
Optional: the trailer is available with aluminum loading ramps

Izvedite več zdaj
+49 201 858 95 507
+49 201 858 95 507
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
Meusburger3-Achs-Tele-Semi mit 1 Paar Radmulden
Pokliči
Stanje: novo, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.900 kg, Chassis:
- Robust welded steel frame construction with front frame lowering and level loading platform, rear chamfer approx. 500x100 mm
- Neck height 200 mm with chamfered front corners
- Chamfered end swan neck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear chamfer)
- 2 kingpin positions with replaceable 2” kingpin
- Outer frame closed to the outside as perforated outer frame
- Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm
- Frame before and after extension with 80x80 mm step
- Reinforced frame design / point load focused in the retracted state
- Without extendable loading platform widenings, however, prepared for retrofitting (=guiding tubes welded into the frame)
- With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle, extending to the end of the vehicle
- 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers coated with Körapur), depth approx. 400 mm
- Underrun protection = extended end plate
- Drop support legs at the rear
Axles, Steering and Tyres:
- BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm
- S-cam brake 300/200 mm, asbestos-free brake linings
- Automatic slack adjuster
- Lifting and lowering device with total lift approx. 200 mm
- 2nd driving position via ball valve +50mm
- 1st axle lift axle (wired to EBS), confirmation fully automatic with manual emergency activation via button on semi-trailer
- 3rd axle as friction-steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, centered by offset
- 12 tyres 245/70 R 17.5 143/141J, tubeless
- Including tyre pressure monitoring
Accessories:
- Plug-in side and rear boards on swan neck, approx. 400 mm high
Gsdpfx Ajxnnk Depbeub
- Spare wheel holder
- Side aluminium underrun protection
- 4 wheel chocks with holder
- Elongated number plate holder in end plate
- 1 removable ECE sign at the rear
- 11 pairs ZK modules 10t, on the side:
- 2x on the swan neck
- 2x on the loading platform in front of the extension
- 7x after the extension
- Extendable warning signs including 3 position lamps each, front at landing gear and rear before end plate, steplessly extendable up to loading width 4,500 mm
- 4 plug-in holders for warning signs in stake pockets on loading platform
- 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm
- 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the swan neck from the outer frame to the main frame (1x in front of and 1x after the kingpin positions)
- 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on the loading platform from outer frame to main frame (1x in front of the extension, 1x after the extension and 1x after the 3rd axle)
- 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container
- Rubber apron mounted on underrun protection
Optional: The trailer is available with ramps.
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
Meusburger3-Achs-Tele-Semi-Radmulden-hydr. Rampen
Pokliči
Stanje: rabljeno, lastna masa: 10.000 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report.
Chassis:
- Sturdy steel frame weldment with front frame camber and level loading platform, rear tapered edge approx. 500x100 mm
- Neck 200 mm with beveled front corners
- Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper)
- 2 king pin positions with replaceable 2" king pin
- Outer frame closed outwards as a hole-type external frame
- Load deck with extendable center frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm
- Frame in front of and behind the division with 80x80 mm step
- Reinforced frame version / point load in retracted position at center of gravity
- With excavator trough (without covering), approx. 220 mm deep, approx. 600 mm wide, starting after 2nd axle to end of vehicle
- 1 pair wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm
Ramps:
- 2 pieces 2-part loading ramps, special design with mechanical extension
- Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting unit (only in combination with electro-hydraulic unit)
- Width approx. 800 mm
- Wood covering
- Incl. traction ribs on loading ramps
- Lockable in transport position with lashing straps
- Operation by control lever mounted at rear right in frame
- Laterally hydraulically adjustable
Flooring:
- 35 mm larch wood floor with aluminum omega profiles
Axles, Steering and Tyres:
- BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm
- S-cam brakes 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- Lift and lowering device with total lift approx. 200 mm
- 2nd driving height via ball valve +50 mm
- 1st axle liftable (wired via EBS), automatic activation with mechanical emergency operation via button on trailer
- 3rd axle as friction-steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, centrally aligned offset
- 12 tyres, 245/70 R 17.5 143/141J, tubeless
- Incl. tyre pressure monitoring
Accessories:
- Plug-in side and rear boards on the gooseneck, approx. 400 mm high
- Spare wheel carrier
- Lateral aluminum underrun protection
- 4 wheel chocks with holders
- Long license plate holder on end cross member
- 1 ECE sign insertable at rear
- 11 pairs of 10t lashing modules on the side:
- 2x on the gooseneck
- 2x on the deck before extension
- 7x after extension
- Pull-out warning signs incl. 3 position lamps each, front at landing gear and rear before end cross member, continuously extendable up to deck width of 4,500 mm
- 4 mountings for warning signs to be inserted into stake pockets on the deck
- 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm
- 2 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inwards to main frame (1x before, 1x after king pin positions)
Gedpfxsxxl E Hs Apbjub
- 3 rows of crosswise stake pockets for plug-in stakes 100x50 mm on deck from outer frame inwards to main frame (1x before extension, 1x after extension, 1x after 3rd axle)
- 2 pairs of steel plates in the load deck for container locks to accommodate 1x 20ft container
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
Meusburger3-Achs-Semi 2P. Radmul.-Federhebewerkra.
Pokliči
Stanje: novo, lastna masa: 8.950 kg, največja dovoljena obremenitev: 40.050 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.950 kg, Oprema: ABS, Chassis:
- Robust welded steel frame construction with front frame cranking and flat loading area with rear taper approx. 500x100 mm
- Neck of frame 200 mm with beveled corners
- Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in area behind rear taper)
- 2 king pin positions with replaceable 2" king pin
- Outer frame closed outside as perforated outer frame for lashing with tie-down straps
- Reinforced frame design / point load at center of gravity
- Prepared for extendable width extensions in the loading area
- With excavator trough, depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to end of vehicle
- 1 pair of wheel recesses in front of axle with steel covers
- (Covers with Körapur coating), depth approx. 400 mm and 1 pair of wheel recesses between 1st and 2nd axle with steel covers
- Underrun protection = extended end plate
- Drop-leg supports at rear
Ramps:
- 2 pieces, single-part aluminium loading ramps with spring lift system
- Dimensions (L x W) approx. 2,500 mm x 600 mm
- Can be locked in transport position with tie-down straps
- Laterally adjustable by hand
Floor:
- 35 mm larch wood floor with aluminium omega-profiles
Landing Gear:
- Mechanical 24 t landing gears with single-sided operation and load compensation
Axles, Steering, and Tyres:
- BPW air suspension axles, 10 t axle load each, air spring diameter 360 mm
- S-cam brakes 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- Lift/lowering device with total travel approx. 200 mm
- 2nd driving position via ball valve +50mm
Gedpfxowu Agij Apbeub
- 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency operation by push button on trailer
- 3rd axle is friction-steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, hub-centered
- 12 tyres 245/70 R 17.5 143/141J, tubeless
- Incl. tyre pressure monitoring
Brake System:
- Two-line brake system with EBS-E including RSS
- EBS (WABCO 4S3M)
- Spring-loaded parking brake
- Air connections yellow / red
Paintwork:
- Steel shot-blasting, chassis spray galvanising and priming
- Chassis / wheel hub / outer frame painted in DB 7350 Novagrau
- Plastic parts black, unpainted
- Rims: factory silver
- Reflective strips on sides and rear in yellow
Accessories:
- Removable side and rear walls approx. 400 mm high on gooseneck
- Spare wheel bracket
- Aluminium bump guard
- 4 wheel chocks
- Sheet metal mudguards with Clear-Pass
- Long licence plate holder in end plate
- 1 removable ECE board at rear
- 11 pairs ZK modules 10 t at sides:
- 2x on gooseneck
- 9x on loading area
- Without tow rings at rear
- Extendable warning boards incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable to loading width 4,500 mm
- 4 mounting holders for warning boards plug-in type in stake pockets on loading area
- 6 pairs of stake pockets at sides for 100x50 mm plug-in stakes
- 2 rows transversely on gooseneck for 100x50 mm plug-in stakes from outer frame to main frame (1x before and 1x after king pin positions)
- 3 rows transversely on loading area for 100x50 mm plug-in stakes from outer frame to main frame (1x front section, 1x before 1st axle, 1x after 3rd axle)
- 2 pairs of steel plates in loading area for container locks, suitable for 1x 20ft container
- Rubber apron fitted on underrun protection
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
Meusburger3-Achs-Semi 2 P. Radmulden-hydr. Rampen
Pokliči
Stanje: novo, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, obratovalna teža: 10.100 kg, Oprema: ABS, Chassis:
- Sturdy welded steel frame construction with front frame cranking and flat loading platform, rear ramped section approx. 500x100 mm
- Gooseneck 200 mm with beveled corners
- Sloped gooseneck end approx. 500x100 mm (traction ribs on outer frame behind rear inclination)
- 2 kingpin positions with replaceable 2" kingpin
- Outer frame closed on the outside as perforated frame for lashing with tension belts (chains not permitted)
- Reinforced frame design / point load at the center of gravity
- Prepared for extendable load platform widenings
- With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle
- 1 pair wheel recesses in front of axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair between 1st and 2nd axle, steel covers
- Underrun protection = extended end plate
- Drop-down supports at rear
Ramps:
- 2-piece drive-up ramps, custom design, with mechanical extension
- Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting mechanism (only in connection with electrohydraulic unit)
- Width approx. 800 mm
- Wood topping
- Incl. traction ribs on ramps
- Can be secured for travel with tension belts
- Operated by manual lever mounted rear right in direction of travel
- Hydraulically laterally shiftable
Gsdpfx Aowviwkspboub
Floor:
- 35 mm larch wood floor with aluminum omega profiles
Landing Gears:
- Mechanical 24 t landing gears, operated from one side with load equalization
Axles, Steering, and Tires:
- BPW air suspension axles, each rated at 10 t axle load, airbag diameter 360 mm
- S-cam brake 300/200 mm, asbestos-free brake linings
- Automatic slack adjuster
- Lift and lower device, total stroke approx. 200 mm
- 2nd drive position via ball valve +50 mm
- 1st axle as lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on trailer
- 3rd axle as friction steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, center-fitted offset
- 12 tires 245/70 R 17.5 143/141J, tubeless
- Including tire pressure monitoring
Accessories:
- Plug-in side walls and rear wall on gooseneck approx. 400 mm high
- Spare wheel holder
- Lateral aluminum underrun protection
- 4 wheel chocks
- Long license plate holder in end plate
- 1 detachable ECE sign at rear
- 11 pairs ZK modules 10t on the sides:
- 2x on the gooseneck
- 9x on the load platform
- Steel mudguards with clear pass
- Extendable warning panels incl. 3 position lamps each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm
- 4 plug-in holders for warning panels in stake pockets on loading surface
- 6 pairs of lateral stake pockets for 100x50 mm stakes
- 2 rows of crosswise stake pockets for 100x50 mm stakes on the gooseneck from outer frame towards main frame (1x before and 1x after kingpin positions)
- 3 rows of crosswise stake pockets for 100x50 mm stakes on loading platform from outer frame towards main frame (1x in front area, 1x before 1st axle, 1x after 3rd axle)
- 2 pairs of steel plates in load platform for container locks to receive 1x 20ft container
- Rubber apron mounted on underrun protection
- Steel shot blasting, chassis hot-dip galvanized and primed
- Chassis/wheel hubs/outer frame painted in DB 7350 Nova grey
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
Meusburger3-Achs-Semi mit 2 Paar Radmulden
Pokliči
Stanje: novo, lastna masa: 8.490 kg, največja dovoljena obremenitev: 40.510 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.490 kg, Oprema: ABS, Chassis:
- Robust welded steel frame structure with front frame drop and flat loading platform with rear bevel, approx. 500x100 mm
- Gooseneck height 200 mm with beveled corners
- Gooseneck end with bevel approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear bevel)
- 2 kingpin positions with interchangeable 2" kingpin
- Outer frame closed outwards as slotted rail for lashing with tie-down straps
- Reinforced frame design / point load at center of gravity
- Provisions for extendable deck wideners
- With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to end of vehicle
- 1 pair wheel recesses in front of the axle with steel covers (covers with Körapur coating), approx. 400 mm deep, plus 1 pair wheel recesses between the 1st and 2nd axle with steel covers
- Underride protection = extended end plate
- Hydraulic drop-down supports at rear
Floor:
- 35 mm larch timber floor with aluminum omega profiles
Axles, Steering, and Tyres:
- BPW air suspension axles, each rated at 10 t axle load, bellows diameter 360 mm
- S-cam brake 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- Lifting and lowering device, total lift approx. 200 mm
- 2nd driving height via ball valve +50mm
- 1st axle lift axle (wired through EBS), fully automatic actuation with manual emergency actuation via button on trailer
- 3rd axle as friction-steered trailing axle with electric and mechanical locking
- 12 steel disc wheels, 10-hole, hub-centered
- 12 tyres 245/70 R 17.5 143/141J, tubeless
- Incl. tyre pressure monitoring system
Braking System:
- Dual-line brake system with EBS-E including RSS
- EBS (WABCO 4S3M)
- Spring-loaded parking brake
- Pneumatic connection yellow/red
Paintwork:
- Steel shot blasting, spray galvanising of chassis and primer
- Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau
Accessories:
- Removable side and rear boards on the gooseneck, approx. 400 mm high
- Spare wheel holder
- Side aluminum underrun protection
- 4 wheel chocks
- Steel fenders with Clear-Pass
- Long license plate holder in end plate
- 1 removable ECE plate at the rear
- 11 pairs ZK modules 10t lateral:
- 2x on the gooseneck
- 9x on the loading platform
- Without rear towing eyes
- Extendable warning signs including 3 position lamps each, front at landing legs and rear in front of end plate, steplessly extendable up to 4,500 mm load width
- 4 insertable sockets for warning signs in stake pockets on loading platform
- 6 pairs stake pockets along sides for 100x50 mm stakes
- 2 cross rows of stake pockets for 100x50 mm stakes on the gooseneck from outside frame to main frame (1 before and 1 after kingpin positions)
Gujdpswu A Slefx Apbob
- 3 cross rows of stake pockets for 100x50 mm stakes on loading platform from outer frame to main frame (1 in front section, 1 before 1st axle, 1 after 3rd axle)
- 2 pairs steel plates on loading platform for container locks to accept 1x 20ft container
- Rubber skirt mounted on underrun protection
- Preparation (cable routing for NATO cable and hole pattern for subsequent mounting of NATO socket at front of end plate and bracket on vehicle) for optional retrofit of electrohydraulic power unit at right rear for potential operation of access ramps
- Mechanical 24-ton stabiliser landing gear with single-sided operation and compensating shaft
Optional: Trailer available with aluminum folding ramps.
Mali oglas
Dortmund
815 km
Polpriklopnik z nizko nakladalno ploščadjo
Faymonville4-1+3-Achs-Tele-Semi-Radmulden-Rampen
Pokliči
Stanje: rabljeno, lastna masa: 14.350 kg, največja dovoljena obremenitev: 48.650 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report.
Gooseneck:
- SNT design gooseneck for optimized loading platform length, length approx. 3,700 mm
- Gooseneck rear with approx. 1,000 mm x 10° bevel
Loading Platform:
- Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10°
- Recessed area in platform and bevel for accommodating the excavator’s dipper stick
Ramps:
- 1 pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide
- Ramps with hardwood decking
- Hydraulically folding ramp tips
- Ramps hydraulically adjustable individually, approx. 235 mm outward and 215 mm inward
- Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the ramp outer frame
Axles and Suspension:
- BPW axles and suspension, first axle steering assist, all other axles forced steered hydromechanical
- Technical axle load: 12,000 kg
- 1st axle with electromagnetic reverse-lock, activated via reverse gear or manually
- Air suspension with lift/lower valve
- 235/75 R 17.5 tires
- TPMS tire monitoring system
Included Accessories:
- Detachable steel front wall, approx. 400 mm high
- 3kW electro-hydraulic power pack for hydraulic controls (except hydraulic winches)
- Park position for warning signs on gooseneck when not in use
- 1 spare wheel
- Gooseneck outer beams with fixing holes for bolted lashing rings
- First borehole approx. 200 mm from the front, then every 400 mm
- 2 pairs of screw-in lashing rings included
- 1 pair of recessed lashing rings at the rear of the gooseneck
- Gooseneck with 1 pair of plug-in anodized ALU sideboards, approx. 400 mm high
Godpfx Apjyrfn Nobsub
- Gooseneck with plug-in anodized ALU rear board, approx. 400 mm high
- Gooseneck deck with 40 mm thick hardwood, with checker plate above king pin
- 2" king pin
- Guide plate on gooseneck for fifth wheel, approx. 500 mm wide
- Round NATO socket on the front connector strip
- 4 wheel chocks
- Mechanical landing legs with 2-speed gearbox and crank
- Loading platform with continuous and between-axle interrupted approx. 50 mm thick hardwood deck
- Platform locking with conically welded locking profiles every 250 mm
- Including pre-tensioning plate
- 1 intermediate table, approx. 300 mm wide, for extension tube with large cross-section; intermediate table has offset loading surface and extendable hanging rails for aluminum bridging elements
- 1 pair of lashing rings on the front cross member
- 8 pairs of recessed lashing rings in outer frame of platform, can be folded outwards
- Galvanized extensions extendable by approx. 230 mm per side
- Wheel wells with square climbing bars, 15 x 15 mm, open continuously in front of the axles to the gooseneck cross member, approx. 700 x 410 mm
- ALU covers for wheel wells, also usable as bridging elements for extension or as widening planks
- Aluminum elements lockable onto extension tubes of the widenings
- Extendable U-profiles for ALU covers
- Wheel wells with square climbing bars, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm
- 1st axle with automatic lift axle function
- 4 warning signs, approx. 423 x 423 mm
- Radio and cable remote control
Mali oglas
Dortmund
815 km
Polpriklopnik z nizko nakladalno ploščadjo
Faymonville4-1+3-Achs-Tele-Semi-Radmulden-Rampen-zg
Pokliči
Stanje: rabljeno, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2024, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, Leto izdelave: 2024, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functional report.
Gooseneck:
- Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long
- Gooseneck rear with chamfer, approx. 1,000 mm x 10°
Loading platform:
- Extendable loading platform, approx. 8,800 mm long, with chamfer at the rear approx. 500 mm x 10°
- A recess in the loading platform and into the chamfer to accommodate the excavator's dipper stick
- Pneumatic locking with conical locking bolts and reinforced locking positions
- Hardwood surface on the chamfer of the loading platform
Ramps:
- 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide
- Ramps with hardwood inlay
- Hydraulically foldable ramp tips
- Ramps can be hydraulically shifted approx. 235 mm outwards and 215 mm inwards individually
- Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp
Axles and Suspension:
- BPW axles and suspension, 1st axle with forced steering, all other axles hydro-mechanically forced steered
- Technical axle load: 12,000 kg
- Air suspension
- Tyres 235/75 R 17.5
- TPMS tyre monitoring system
- TPMS tyre pressure sensors
Included Accessories:
- Plug-in steel front wall, approx. 400 mm high
- 3kW electro-hydraulic unit for hydraulic operations
- 1 spare wheel
- Outer beams on the gooseneck with fixing holes for bolted lashing rings
- First hole approx. 200 mm from the front, then approx. every 400 mm
- 2 pairs of screw-in lashing rings included
- 1 pair of horizontal lashing rings at the rear of the gooseneck
- On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized
- On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized
- 2" kingpin
- Round NATO socket at the front connection bar
Gusdpfx Apoypb Akobjb
- 4 wheel chocks
- Mechanical landing gear with 2-speed gearbox and crank
- 1 intermediate table, approx. 300 mm wide
- 1 pair of lashing rings on the front crossmember
- 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards
- Extendable galvanized outriggers, approx. 230 mm per side
- Wheel recesses with square climbing strips, 15 x 15 mm, open continuously in front of the axles up to the gooseneck crossmember, approx. 700 x 410 mm
- ALU covers for the wheel recesses
- Lockable aluminium elements fitted on the extension pipes of the outriggers
- Widenable U-profiles for inserting the ALU covers
- Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm
- Lockable aluminium elements fitted on the extension pipes of the outriggers
- 1 pair of mechanical rear supports
- Remote steering control from both front and rear by cable remote control, with axle single-track alignment control
- 1st axle with automatic lift axle function and start assist according to EU Directive 2021/535
- Under the gooseneck and at the rear crossmember left and right: 7-pin sockets with mountings for warning plates
- Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the chamfered part of the loading platform outer frame
- Central lubrication system with 1 pump, BEKAMAX
- Radio remote control for steering in addition to cable remote
- Wabco Smart Board system
- 4 warning plates, approx. 423 x 423 mm, extendable by approx. 400 mm
Mali oglas
Dortmund
815 km
Nizki nakladalnik
Faymonville4-1+3-Achs-Tele-Semi-Radmulden-Rampen zg
Pokliči
Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck:
- Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm
- Rear gooseneck with bevel approx. 1,000 mm x 10°
Loading Platform:
- Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10°
- A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick
- Pneumatic locking with conical locking bolts and reinforced lock positions
- Hardwood covering on the loading platform bevel
Ramps:
- 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm
- Ramps with hardwood covering
Gedpek Aht Ujfx Apboub
- Hydraulically folding ramp tips
- Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward
- Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp
Axles and Suspension:
- BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system
- Technical axle load: 12,000 kg
- 1st axle with electromagnetic reversing lock, activated via reverse gear and manually
- Air suspension with raising and lowering valve
- Tyres 235/75 R 17.5, twin tires
- TPMS tire monitoring system compliant with ECE R141
- TPMS sensors installed in all wheels including spares
Accessories included:
- Removable steel front wall, approx. 400 mm high
- 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches
- Parking position on gooseneck for warning boards when not in use
- 1 spare wheel
- On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised
- On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised
- Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin
- 2" king pin
- Guide plate on gooseneck for fifth wheel, approx. 500 mm wide
- 4 wheel chocks
- Mechanical landing gear with 2-speed gearbox and crank
- JOST Modul B – static test load = 50,000 kg
- 1 intermediate table, approx. 300 mm wide
- Extensions (galvanised) extendable by approx. 230 mm per side
- Wheel recesses with square climbing cleats
- ALU covers for the wheel recesses
- 1 pair of mechanical rear supports
- Remote steering at front and rear via cable remote control, with single track monitoring of axles
- 1st axle with automatic lift axle function
- Central lubrication system with 1 BEKAMAX brand pump
- Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring
- Wabco Smart Board System
- 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim ležiščem za prevoz gradbenih strojev
FaymonvilleMAX Trailer 3-A-Tele-Semi-Radmul.-Rampen
Pokliči
Stanje: rabljeno, lastna masa: 11.200 kg, največja dovoljena obremenitev: 36.800 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you receive a current & comprehensive inspection and function report.
Gooseneck:
- Gooseneck with rear bevel of approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood floor
Extendable loading area:
- Telescopic loading area with rear incline approx. 1,000 mm x 8°
- 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm
- Wheel recesses with 15 x 15 mm square climbing strips and widened sections in the lower area
- Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm
- Incl. 3-piece removable galvanized covers over the wheel recesses (width 670 mm) – max. point load 5 t / pc
Gusdpfx Asyyldujpbeb
- Recess in the incline and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm
- 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN)
- 5 pairs of swing-out lashing rings (LC 5,000 daN)
- 2 pairs of swing-out lashing rings (LC 10,000 daN)
- 2 pairs of lashing rings in the excavator dipper recess (LC 5,000 daN)
- Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN)
Ramps:
- One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering
- Ramps with hydraulically folding ramp sections, hydraulic lifting unit, and hydraulically adjustable
- Maximum load per pair: 40,000 kg
Axles and tires:
- BPW axles and suspension, 2 rigid axles, 1 trailing self-steer axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock operable via reverse gear and manual activation
- Air suspension with raise and lower valve
- Axle tools
- TPMS tire pressure monitoring system compliant with ECE R 141
- Tires: 235/75 R17.5 3PMSF
Accessories included:
- Bracket for warning signs on the gooseneck and at the rear, left and right, each with socket
- One spare wheel with holder in front of the bulkhead
- 2" kingpin
- Galvanized steel front wall approx. 400 mm high
- Yellow-red air couplings at the front galvanized connection rail
- 4 wheel chocks with holders
- Galvanized, extendable width extensions approx. 230 mm per side
- Galvanized folding supports under the incline of the loading area
- Cover plates to bridge the gap between ramps and loading area
- White reflective tape on sides and on extendable section, rear in red, according to EU regulations
- Electro-hydraulic unit at the rear, under the loading area
- European reflector boards (red-yellow) on the rear of the semi-trailer
- Four extendable warning signs, each approx. 423 x 423 mm with position lamp (extend approx. 400 mm)
- Bracket for rotating beacon on the warning signs
- On the gooseneck, plug-in aluminium side and rear boards approx. 2,440 x 400 mm
- Rear, galvanized plug-in stanchions removable (body length approx. 2,560 mm)
- 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container
- 3 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area
- Removable, galvanized intermediate table with 1 pair of WADER container pockets
- 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area incline
- Painted sand layer as anti-slip protection on chequer plates on the gooseneck and loading area
- Speed sticker 80 km/h on rear and both sides
- Load manometer for determining axle loads, including load chart
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-Radmu.-Ram.
Pokliči
Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm hardwood flooring
Load Area:
- Extendable loading area with rear taper approx. 1,000 mm x 8°
- 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm
- Wheel recesses fitted with square climbing strips 15 x 15 mm, including lower extensions
- Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm
- Recess in the bevel as well as protruding into the loading area for parking excavator dipper stick approx. 2,900 x 750 x 210/290 mm
- 1 pair of lashing rings, installed flat at the front of the load area (LC 10,000 daN)
- 5 pairs of folding lashing rings on the outside (LC 5,000 daN)
- 2 pairs of folding lashing rings on the outside (LC 10,000 daN)
- 2 pairs of lashing rings in the dipper stick recess (LC 5,000 daN)
- Cut-outs in the outer frame of the load area for securing straps (LC 2,000 daN)
- Incl. three-part removable galvanized covers over the wheel recesses – max. point load 3.5 t / pc.
Two-piece Steel Ramps:
- One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surfacing
- Ramp with hydraulically folding ramp sections, hydraulic lifting gear, and hydraulically adjustable
Axles and Tyres:
- BPW axles and suspension, 2 rigid axles, 1 steering trailing axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock, activated via reverse gear and manually
- Air suspension with lifting and lowering valve
- Axle tool kit
- Tyres 235/75 R 17.5
- TPMS tyre pressure monitoring system in accordance with ECE R 141
Accessories Included:
- Mounts for warning signs left and right at the gooseneck and at the rear, each with socket
Guodpfx Apjup U Hzjbob
- One spare wheel
- 2" king pin
- One galvanized steel front wall, approx. 400 mm high
- Yellow-red air couplings at the galvanized front connector strip
- 4 wheel chocks
- Galvanized, extendable outriggers approx. 230 mm per side
- Galvanized folding supports beneath the loading area bevel
- Rear trailer bracket for rotating beacon
- Cover plates for bridging the gap between ramps and load area
- White reflective tape to EU regulations, sides and on extensions; rear in red
- Electro-hydraulic unit installed at the rear beneath the loading area
- Ramp control valves mounted on right trailer side
- European reflective panels (red-yellow) on rear of trailer
- Four extendable warning boards, approx. 423 x 423 mm, with position light
- Bracket for rotating beacon on warning boards
- Removable ALU side boards and rear board on gooseneck approx. 2,440 x 400 mm
- Rear galvanized removable stakes (structure length approx. 2,560 mm)
- 2 pairs of WADER container pockets in loading area for 20ft or 30ft container
- 3 pairs of socket pockets for stakes 100 x 50 mm in outer frame of loading area
- Removable, galvanized intermediate table with 1 pair of WADER container pockets
- Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame at loading bevelling
- Painted sand layer on chequer plates of the gooseneck and loading area for anti-slip protection
- 80 km/h speed stickers rear and both sides
- Load manometer for axle load measurement, including load chart.
Mali oglas
Dortmund
815 km
Nizki nakladalnik
FaymonvilleMAX Trailer 3-Achs-Tele-Semi m. hydr. Rampen-nlla.
Pokliči
Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck:
• Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10°
• 3 pairs of lashing rings
• 30 mm thick hardwood flooring
Extendable loading platform:
• Loading platform in extendable design with rear taper approx. 1,000 mm x 8°
• Cut-outs in outer frame of loading platform for attaching tensioning straps
• Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles
Two-piece steel ramps:
• One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering
• Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable
• Maximum load per pair: approx. 40,000 kg
Axles and tires:
• BPW axles and suspension, 2 rigid axles, 1 self-steering axle
• Technical axle load: 12,000 kg
• Electromagnetic reverse lock, activated via reverse gear or manually
• Air suspension with lift and lower valve
• Axle tools
• 235/75 R 17.5 3PMSF
Braking system:
• WABCO braking system according to EU regulations with EBS-E
Paintwork:
• First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer
• High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint
• Rear section metallized and painted in RAL 9010
Landing legs:
• JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load)
Godpfx Apshlz S Nebsub
Steel construction:
• Steel construction made of high-strength fine-grain steels
• Steel grades:
• S355J2+N/S355MC
• S690QL/S700MC
Electrical system:
• Electrical system in accordance with EU regulations, 24 Volt lighting
• ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets
Accessories included:
• One spare wheel with holder
• Galvanized steel front wall approx. 400 mm high
• Yellow-red air couplings on the galvanized front connection panel
• 4 wheel chocks
• Rear mounting bracket for beacon light at the end of the semitrailer
• Recess at rear of gooseneck for ALU approach ramps
• Galvanized folding supports under the loading platform taper
• Cover plates to bridge the gap between ramps and loading platform
• White reflector tape per EU regulations on sides, extension, and red at rear
• Electro-hydraulic unit at rear, under the loading platform
• On gooseneck and ramps, left and right, each with a holder for warning signs, including socket
• Operating valves for the ramps located on the right side of the trailer
• ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm
• The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm)
• Four warning panels extendable by approx. 400 mm with a position light
• 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container
• 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform
• Galvanized extensions, extendable by approx. 230 mm per side
• 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper
• Painted anti-slip sand layer on checker plates, above king pin and loading platform
• Load gauge for axle load measurement, including load diagram
• HRM metallization (High Resistance Metallisation) of the outer frame
• Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)
Mali oglas
Dortmund
815 km
Nizki nakladalnik
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-RM-ALU-Ram.
Pokliči
Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring, 30 mm thick
Loading area:
- Telescopic loading area with rear chamfer approx. 1,000 mm x 8°
- 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm
- Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom
- Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm
- 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc.
- Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm
- 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN)
- 5 pairs of foldable external lashing rings (LC 5,000 daN)
- 2 pairs of foldable external lashing rings (LC 10,000 daN)
- 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN)
- Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN)
One-piece aluminum ramps:
- 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm
Gsdpfxjiu Er Aj Apbeub
- Ramp with spring lifting mechanism and manually adjustable
- Maximum load per pair: 24,000 kg
Axles and tires:
- BPW axles and suspension, 2 rigid axles, 1 trailing steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reversing lock, activated via reverse gear and manually
- Air suspension with lift and lower valve
- Axle tool
- Tyres 235/75 R 17.5
- TPMS tire pressure monitoring system compliant with ECE R 141
Accessories included:
- 1 spare wheel with holder in front of the bulkhead
- 2" kingpin
- 1 galvanized steel front wall approx. 400 mm high
- At the galvanized coupling rail at the front, yellow-red air couplings
- 4 wheel chocks with holder at the bulkhead
- Mounting point at the rear of the gooseneck for ALU ramps
- Galvanized extensions, extendable by approx. 230 mm per side
- Galvanized folding supports under the chamfer of the loading area
- 1 holder for a rotating beacon at the rear of the trailer
- White reflective tape laterally, at the extension, and red at the rear, per EU regulations
- At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket
- On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm
- The rear galvanized stakes are removable (body length approx. 2,560 mm)
- 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container
- 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area
- 1 removable galvanized intermediate table with 1 pair of WADER container pockets
- 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area
- Anti-slip sand coating on the checker plates on the gooseneck and the loading area
- Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light
- Holder for rotating beacon on the warning signs
- 80 km/h speed stickers at the rear and on both sides
- Load gauge for determining axle loads including load diagram
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
Goldhofer6-Achs-Tele-Semi mit hydr.Rampen-zwangs.
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 75.700 kg, skupna masa: 93.200 kg, konfiguracija osi: 3 osi, prva registracija: 06/2008, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 885 mm, velikost pnevmatike: 245/70 R17.5, barva: bež, Leto izdelave: 2008, Gooseneck, rigid, in central beam design:
- Loading area: 3,700 mm x 2,480 mm
- Beveled 10°, front corners 45° (1,080 mm long, 190 mm high bevel at the end of the gooseneck)
- Closed outer frame
- Max. fifth wheel load: 26,000 kg
- Swing radius: 2,700 mm
- 2" kingpin
- Wooden floor
- Hydraulically operated landing legs
- One-piece aluminum drop sides, 400 mm high, closed on 3 sides including rear tailboard, stakes foldable and removable
- 2 pairs of lashing points LC 8,000 daN
Loading area:
- Single telescoping, continuous over chassis
- External/internal tube construction with 1,090 mm fixed loading platform section at front
- (L x W): 8,700 mm x 2,550 mm, extendable by 6,700 mm to max. 15,400 mm
- Steel floor covering
- Locking of extension stages via spring-loaded cylinders and conical bolts
- Vehicle optimized for maximum extension
- 7 pairs of lashing points LC 13,000 daN
- 6 pairs of lashing points LC 6,000 daN
- 6 pairs of stake pockets 100 x 50 mm (LC 2,000 daN)
6-axle running gear:
Godpsxp U Tzefx Apbsub
- 1 rigid axle, 5 forced-steering axles
- Axle brand: SAF
- Chassis width: 2,550 mm
- 1st axle: load-dependent lift axle
- 2nd axle: manually liftable (not load-dependent)
- Wheelbase, starting from first axle: 1,310 mm
- Twin tires 245/70 R 17.5
- Air suspension, 200 mm lift
- Ride height: 885 mm +100 mm / -100 mm
- 2nd ride height: 845 mm +140 mm / -60 mm
- Floor covering: steel / wood
Vehicle rear:
- "Beveled" design (600 mm long, 10° bevel)
- 1,000 mm overhang from center of last axle
- Ramp eye detachable at the rear cross member
- Mechanical support for stowage during loading
- 1 pair of lashing points LC 6,000 daN
- 1 pair of lashing points LC 13,000 daN
Loading ramps:
- Two-piece loading ramps, length 2,850 mm + 1,540 mm, width 720 mm
- Hydraulic ramp lifting mechanism
- SuperGrip rubber surface
- Climbing strips on outside of ramps 20 mm x 20 mm x 100 mm
- Laterally adjustable by hydraulic cylinder to maximum external width of 2,790 mm or minimum internal spacing of 480 mm
- Integrated mechanical lock in ram lift cylinder for securing in transport position
- Mounting bracket for beacon light
Hydraulics:
- Hydraulic coupling for tractor unit (1 set), connectors for tractor, hydraulic pump on tractor unit with maximum 60 l/min delivery rate
- Hydraulic hand emergency pump
- Electric-hydraulic power pack
Rear steering:
- Rear steering bottle for manual steering of trailer axles by cable remote control, spiral cable extendable from 1.5 m to 5 m
Accessories included:
- Spare wheel holder at front of gooseneck, pluggable, galvanized
- Mounting bracket for stakes on gooseneck
- 2 pairs warning signs, approx. 423 mm x 423 mm
- Widening kit incl. widening beams, hook-on widening element at vehicle rear
- 1 pair wheel chocks incl. holder
- 1 spare wheel
- Central lubrication system with 2 grease pumps
- Single-color paint finish in RAL-1001 beige
Mali oglas
Dortmund
815 km
Polpriklopnik z nizko nakladalno ploščadjo
Faymonville4-1+3-A-Tele-Semi-Radmul.-Rampen-Gummibe
Pokliči
Stanje: novo, lastna masa: 14.350 kg, največja dovoljena obremenitev: 53.450 kg, skupna masa: 67.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Gooseneck:
- Gooseneck in SNT design for optimization of loading bed length, length approx. 3,700 mm
Gujdeya E A Njpfx Apbeb
- Gooseneck rear with chamfer approx. 1,000 mm x 10°
- For tractor units: 6x2, 6x4, 8x4 short
Loading bed:
- Extendable loading bed, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10°
- A recess in the loading bed and the chamfered section for receiving the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm
Two-part steel ramps:
- One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm
- Ramps with rubber covering
- Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 215 mm inwards
- 'Super Grip' 25 mm rubber flooring and approx. 5 mm steel plate as additional reinforcement on the rear chamfer of the loading bed
- Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp
Axles, suspension and tires:
- BPW axles and suspension, 1st axle steering, all other axles hydromechanically forced-steered
- Technical axle load: 12,000 kg
- 1st axle with electromagnetic reverse lock, activated via reverse gear and manually
- Air suspension with lift and lower valve
- Tires 235/75 R 17.5
- TPMS tire monitoring system according to ECE R141
- TPMS tire sensors fitted on all wheels, including spares
Surface treatment:
- Complete steel structure automatically blasted with shot blasting system after welding
- Second blasting with corundum for optimum coating adhesion
- HRM metallization of entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection
- Final painting with 2 layers of 2K top coat, single colour in MB 7350 Novagrau
Accessories included:
- Plug-in steel front wall, approx. 400 mm high
- 3kW electro-hydraulic power unit for controlling hydraulic functions, with the exception of hydraulic winches
- 1 spare wheel
- Outer carrier on the gooseneck with mounting holes for bolted lashing rings
- First hole approx. 200 mm from the front, then approx. every 400 mm
- 2 pairs of screw-in lashing rings included
- 1 pair of horizontal lashing rings in the rear area of the gooseneck
- On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized
- On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized
- On top of the gooseneck, approx. 40 mm thick hardwood flooring, above kingpin area with checker plate cover
- 2" kingpin
- Round NATO socket on front connection strip
- 4 wheel chocks
- 1 intermediate table, approx. 300 mm wide
- 1 pair of lashing rings on the front cross member
- 8 pairs of recessed, fold-out lashing rings in the outer frame of the loading bed
- Extendable (galvanized) widenings by approx. 230 mm per side
- Wheel recesses with square climbing bars, 15 x 15 mm, in front of the axles fully open up to gooseneck cross beam, approx. 700 x 410 mm
- Wheel recesses with square climbing bars, 15 x 15 mm, between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm
- ALU covers for wheel recesses, which can also be used as bridging elements for the extension or as widening boards
- 1 pair mechanical rear supports
- Radio and cable remote control
- Lift axle on front axle
- Square climbing bars 20 x 30 mm, approx. every 200 mm
- Central lubrication system with 1 pump
- Wabco Smart Board system
- 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-nachlaufg.
Pokliči
Stanje: novo, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 3PMSF, barva: siv, Oprema: ABS, Swan neck:
- Swan neck with front corners beveled at 45° and rear chamfer approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm hardwood flooring
Extendable load area:
- Extendable load area with rear chamfer approx. 1,000 mm x 8°
- 6 pairs of fold-out lashing rings (LC 5,000 daN)
- 3 pairs of fold-out lashing rings (LC 10,000 daN)
- 1 pair of flat lashing rings at the front of the load area (LC 10,000 daN)
Gedpfx Apouqlmnebeub
- Cut-outs in the external frame of the load area for attaching lashing straps (LC 2,000 daN)
- Approx. 48 mm hardwood flooring, over the axles with checker plate covering
Axles and Tires:
- BPW axles and suspension, 2 fixed axles, 1 self-steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock, activated by reverse gear or manually
- Air suspension with lifting and lowering valve
- Axle tools
- 235/75 R 17.5 tires, 3PMSF
Braking system:
- WABCO braking system as per EU regulations with EBS-E (2S2M)
Landing legs:
- JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Accessories included:
- One spare wheel with holder in front of the front wall
- 2'' king pin
- One galvanized steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanized front connection rail
- 4 wheel chocks with holder at the front wall
- Rear light bracket at the rear of the trailer
- Mounting points at the rear area of the swan neck for ALU loading ramps
- Galvanized folding supports under the chamfer of the load area
- Cover plates to bridge the gap between ramps and load area
- White reflective tape according to EU standards on the sides, red at the extension and rear
- Electro-hydraulic unit at the rear, under the load area
- Bracket for warning panels left and right on the swan neck and ramps, including power socket
- Ramp control valves mounted on the right-hand side of the trailer
- One mud flap at the rear of the trailer
- Manual and documentation on USB stick
- On the swan neck aluminum side walls and rear wall, approx. 2,440 x 400 mm
- The rear galvanized stakes are removable (body length approx. 2,560 mm)
- Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light
- 3 pairs of WADER container pockets in the load area for a 20ft, 30ft, or 40ft container
- 6 pairs of stake pockets 100x50 mm in the external frame of the load area
- Galvanized extensions, extendable by approx. 230 mm per side
- Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfered area of the load area
- Anti-slip sand layer painted on the checker plate above the king pin and load area
- Mounting for beacon on the warning panels
- European reflective plates (red-yellow) at the rear of the trailer
- 80 km/h speed stickers at the rear and on both sides
- Load gauge for determining axle loads, including load chart
- HRM metallization (High Resistance Metallisation) of the external frame
- Complete steel construction shot-blasted, then the defined visible surfaces finished hot-metallized with ZINACOR 850 (zinc 85% - aluminum 15%)
Mali oglas
Regensburg
385 km
Polpriklopnik z nizko nakladalno ploščadjo
MEUSBURGERTELE TIEFBETT 3+1 DOLLY PENDELACHSEN Nr.: 815
Pokliči
Stanje: rabljeno, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2010, Oprema: ABS, Semi-Trailer - Vehicle Identification Number: W09PG3009A0M49815 - First Registration: 25/08/2010
DOLLY - Vehicle Identification Number: W09PG3009A0M49816 - First Registration: 25/08/2010
ELECTRO-HYDRAULICS
German roadworthiness inspection (HU) valid until 04/2026 - safety inspection (SP) due
Unladen weight: Trailer: 16,850 kg -- Dolly: 2,240 kg
Fifth wheel height: 1,280 mm - Replaceable kingpin - 3.5"
Front turning radius approx. 1,640 mm
----Hydraulically detachable and height-adjustable gooseneck - Length: 3,750 mm
Low-bed: Length: 6,850 mm, Width: 2,750 mm - Loading height: approx. 350 mm
Extendable by 4,000 mm
Widenable up to 3,210 mm
Chassis frame: Length: 4,100 mm, Width: 2,750 mm - Loading height: approx. 1,035 mm
Total length: 14,700 mm
Excavator trough - bucket arm recess
Central lubrication system
GIGANT axles - PENDULUM AXLES with drum brakes
With radio remote control
3 x hydraulically suspended and steered axles
Axle loads: 3 x 12,000 kg
Maximum kingpin load: 25,000 kg
Gujdpfxswxi Nre Apbob
Tyres: 245/70 R 17.5
Matching DOLLY 1 axle
BPW Eco axle with drum brake
Air suspension
Subject to change, prior sale and errors excepted. The description serves for general identification of the vehicle and does not constitute a warranty in the legal sense of sales law. The description in the sales contract is binding.
Our offer generally does not include new TÜV approval. If new TÜV approval is required, we will be glad to provide an offer from one of our partner workshops. Vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.
Mali oglas
Dortmund
815 km
Nizki nakladalnik
Faymonville4-2+2-Achs-Tele-Semi m. Radmulden u. Rampen
Pokliči
Stanje: novo, lastna masa: 13.500 kg, največja dovoljena obremenitev: 51.500 kg, skupna masa: 69.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17.5, barva: siv, Oprema: ABS, Gooseneck:
Gooseneck in SNT design for optimizing loading platform length, length approx. 3,700 mm
Gooseneck rear with chamfering approx. 1,000 mm x 10°
Loading Platform:
Telescopic loading platform, length approx. 8,800 mm, with rear chamfering approx. 500 mm x 10°
Recess in the chamfer as well as into the loading platform to accommodate the excavator dipper stick
Pneumatic locking with conical pin and reinforced locking positions
Supply lines routed protected within the extendable beam, adapting to the respective platform length
Ramps:
1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm
Hydraulically folding ramp tips
Ramps individually adjustable hydraulically approx. 235 mm to the outside and approx. 215 mm to the inside
Axles and Suspension:
BPW axles and suspension, two rigid axles, two steering trailing axles
Electromagnetic reverse lock, activated via reverse gear and manually
Air suspension with lift and lower valve
Axle tool
Tyres: 235/75 R17.5 3PMSF twin tyres
Load index: 143/141J (144/144F)
Brake System:
WABCO braking system, EBS-E in accordance with EU regulations
Lighting System:
24-volt lighting system in "ASPÖCK-NORDIK full LED"
Metalizing:
Standard HRM metallization of the outer frame
Complete steel structure shot-blasted, then visible defined surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) hot-refined
Steel Construction:
Steel grades:
S355J2+N/S355MC (yield strength 355MPa)
S690QL/S700MC (yield strength 690MPa)
Welders certified as per DIN-EN 287-1
MAG welding process according to EN ISO 4063
Shielding gas M21 as per EN ISO 14175
Accessories Included:
Front wall made of steel, plug-in, height approx. 400 mm
ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin
Gsdpfxsk Ahugo Apbsub
24N connection per ISO-11852, 24S connection per ISO-3731, 15-pin connection per ISO-12098
Round NATO socket on the front connection strip
Cable to supply electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and tractor with connector (NATO-NATO)
3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches
1 spare wheel with mounting adapter
Outer beam of the gooseneck with fastening holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm
2 pairs of screw-in lashing rings included
One fastening hole in the rear upper area of the gooseneck's outer beam for a screwable lashing ring
1 pair of screw-in lashing rings
Approx. 40 mm thick hardwood covering above the gooseneck
On the gooseneck, 1 pair of plug-in side aluminium walls, approx. 400 mm high, anodized
On the gooseneck, a plug-in aluminium rear wall, approx. 400 mm high, anodized
2" kingpin
Gooseneck guide plate for fifth wheel, approx. 500 mm wide
4 wheel chocks with holder
Holder for aluminium approach ramps
Mechanical landing gear with 2-speed gearbox and crank
Continuous hardwood floor approx. 50 mm thick on the loading platform, interrupted between axles
Platform locking with conically welded locking profiles every 250 mm incl. tension plate
Slotted holes at the front of the loading platform for attachable and adjustable bridging elements
1 intermediate table with recessed platform, approx. 300 mm wide for the draw-out tube with large cross-section, with sheet metal covering
Front and rear with slotted holes
Mali oglas
Dortmund
815 km
Platforma
FaymonvilleMAX Trailer 3-Achs-Mega-Tele-Plateau-Radmulden
Pokliči
Stanje: novo, lastna masa: 9.500 kg, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, obratovalna teža: 9.500 kg, Oprema: ABS, Loading platform in extendable design:
Loading platform with hardwood planks, rear bevel approx. 1,000 mm x 8°
1 pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm
2 pairs of lashing rings (LC 5,000 daN)
1 pair of lashing rings (LC 10,000 daN)
6 pairs of fold-out lashing rings on the outside (LC 5,000 daN)
2 pairs of fold-out lashing rings on the outside (LC 10,000 daN)
Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN)
Brake system:
Brake system as per EU regulations with EBS-E (2S2M)
Paintwork:
Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer
High-quality single-colour 2-component (2K) top coat in Nova grey
Rear section metallized and painted in RAL 9010 (Pure White)
No metallic paint possible
Landing gear:
JOST mechanical landing gear with 2-speed gearbox for 24t lifting capacity (50t test load)
Steel construction:
Steel construction from high-tensile fine-grain steels
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Electrical system:
Electrical system according to EU regulations, 24 volt lighting
Godpfx Apek Eammsbeub
Sockets: 24N, 24S & 15-pin
Axles and tyres:
BPW axles, air suspension, with disc brakes (377 mm), with lift/lower function
Trailing steering axles with electro-magnetic reversing lock, actuated via reverse gear or manually
Axle tool
Tyres: 435/50 R 19.5
Accessories included:
At the galvanized front connection strip: yellow-red air couplings
4 wheel chocks with brackets
2" kingpin
Galvanized steel front wall approx. 1,600 mm high, EN12642-XL
White reflective tape to EU standards on the sides, extension section and red at the rear
Loading platform with heavy-duty hardwood floor
9 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform
1 spare wheel holder under the platform on the right (direction of travel)
Galvanized folding supports under the rear slope of the loading area
Sliding mounting rails for ALU loading ramps at the rear of the vehicle
European reflective plates (red-yellow) at the rear of the semi-trailer
One mudflap at the rear of the semi-trailer
Bracket for a rotating beacon at the rear of the semi-trailer
At the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket
One HDPE toolbox 620x360x610 under the platform on the left (direction of travel)
4 pairs of WADER container locks in the platform for 1x 20ft container or 1x 40ft container; additional locking position in the extension for a 45ft container
3 pairs of transverse stake pocket rails on the platform for 100 x 50 mm plug-in stanchions
Lift axle on the front axle with control via TEBS E, depending on current axle load and loading condition
Speed stickers 80 km/h on the rear and both sides
Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Mounting for rotating beacon on warning boards
Load gauge including axle load diagram
HRM metallization (High Resistance Metallisation) of the outer frame
Complete steel structure shot blasted, then specified visible surfaces metallized
Znak zaupanja
Prodajalci, certificirani pri TruckScout24

Mali oglas
Wiesmoor
957 km
Polpriklopnik z nizko nakladalno ploščadjo
BROSHUIS3ABSD-48 3-Achs Semi-Tieflader 2-fach Teleskop S
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 34.440 kg, skupna masa: 46.500 kg, konfiguracija osi: 3 osi, prva registracija: 06/1999, dolžina tovornega prostora: 13.550 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Skupna masa: 46.500 kg
Lastna masa: 12.060 kg
Nosilnost: 34.440 kg
Skupna dolžina: 13.550 mm - 26.550 mm
Širina: 2.550 mm
Gusdpfx Aeycpbnopbob
Dodatne informacije
- 3 osi hidravlično prisilno vodene
- Klin za preusmeritev nad sedlom
- Vpenjalna letev za rampe
- Vstavni koli na nakladalni površini
- Dvojno teleskopsko raztegljiv do 26.550 mm
- Orodni kovček na labodjem vratu
- E-kolo
- priprava za eln
- hidravlična funkcija sledenja z električnim daljinskim upravljanjem
- velik paket za pritrditev
- lastna hidravlična črpalna enota
Na voljo tudi novi in rabljeni polpriklopniki nizkopodnežnega tipa.
Več informacij na
Mali oglas
Salzgitter
746 km
Polpriklopnik z nizko nakladalno ploščadjo
MEUSBURGERMTS-3 / Teleskop / 13.085 - 17.385 mm /Lenkachse
Pokliči
Stanje: rabljeno, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2008, FRANÇAIS
Visitez notre site internet, où vous trouverez notre stock complet avec de nombreuses autres photos et des informations dans plusieurs langues.
SEL 8001
Meusburger MTS-3
Télescopique / 13 085 - 17 385 mm / Essieu directeur
Immatriculation allemande
Mise en circulation : 18.11.2008
PTAC technique (kg) : 49.000
PTAC autorisé (kg) : 47.000
Poids à vide (kg) : 7.670
N° de série (VIN) : W09TS300980M49145
PNEUMATIQUES ET ESSIEUX :
Pneumatiques : 245/70 R 17,5
Configuration des essieux : 3 Essieux BPW
3ème Essieu : Essieu suiveur à friction
Suspension pneumatique
Freins à tambour
AUTRES SPÉCIFICATIONS :
Télescopique
DOCUMENTS DU VÉHICULE :
Certificat d’immatriculation
Carte grise
M. BUFANO
m.
(Italien, Anglais, Allemand)
J. CORDEIRO
j.
(Portugais, Espagnol, Italien, Anglais)
J. MARJANOVIC
j.
(Allemand, Bosnien)
Gsdpsxpl Ntsfx Apbsub
L. OBODYNSKA
(Ukrainien/?????, Russe/??-?????)
Nous parlons : ALLEMAND, ANGLAIS, ITALIEN, ESPAGNOL, PORTUGAIS, UKRAINIEN, RUSSE, POLONAIS, BOSNIEN
Bien que tous les efforts aient été faits pour garantir l’exactitude des informations, nous ne pouvons être tenus responsables des erreurs ou omissions éventuelles. Nous invitons nos clients à consulter les photos disponibles. Les mesures indiquées sont des valeurs approximatives.
Nos véhicules sont vendus dans leur état actuel. Nous invitons nos clients à visiter notre société afin d’inspecter personnellement l’état du véhicule. Nous offrons également la possibilité d’un essai routier. Il est important de noter que les batteries livrées avec le véhicule sont celles actuellement installées. Si le client souhaite des batteries neuves, nous restons à disposition pour une information sur le prix.
Mali oglas
Regensburg
385 km
Polpriklopnik z nizko nakladalno ploščadjo
MEUSBURGERSemi - TELESKOP - RADMULDEN - Nr.: 248
Pokliči
Stanje: rabljeno, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2011, Oprema: ABS, Vehicle Identification No.: W09TS300990M49248
TELESCOPIC EXTENSION up to 4,300 mm
SLIDING TABLE
WHEEL RECESSES
Unladen weight: 9,000 kg
German MOT (HU) due
Neck length: 3,650 mm – Saddle height: 1,250 mm
Low bed: Length: 9,430 mm (of which 1,830 mm are tapered) – Width: 2,540 mm – Loading height: 890 mm
Hook-in rails
Support stands
Widening lighting
Fifth wheel load at front: max. 19,000 kg
Axle loads (technical) 3 x 10,000 kg
BPW Eco Plus axles with drum brakes
Gusdpfx Apoyx N Eyebjb
Axle 1 = LIFTABLE
2 x toolboxes
Tyres: 235/75 R 17.5
Spare wheel holder WITH spare wheel
Modifications, prior sale, and errors excepted. The description is intended for general vehicle identification only and does not represent a guarantee as per sales law. The terms outlined in the purchase contract are decisive.
Our offer is in general without new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide a quote from one of our partner workshops! The vehicle may have advertising stickers and/or lettering applied. Our general terms of delivery and payment apply.
Olajšamo vam iskanje: "meusburger 3-achs-tele-semi-1p. radmul.-hydr.rampen"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.

Izvedite več zdaj
+49 201 858 95 507
+49 201 858 95 507
Objavite oglas zdaj
*na oglas/mesec





























































































































































































































































































