Böckmann Priklopnik Z Delovno Ploščadjo nakup rabljenega (41.142)

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting/lowering system and RtR valve * Smard board for payload weighing * Warning sign kits, front and rear * Reflective contour tape on the sides and rear * Removable rotating beacon (rear) * LED lighting * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel sheet and basket-type spare wheel holder, mounted right side * Front: closed single plastic mudguard * Rear: straight steel mudguards, each with spray suppression * Side underrun protection * Bogie platform extension by 520 mm with 45° corners, 3 integrated lockable storage compartments with lids * Chassis made of high-strength fine-grained steel * 50 mm softwood floor over bogie platform, 60 mm softwood on low-bed platform * Outer rails on ramps made of hardwood * 4 stake pockets per side (no stakes included); 2 t lashing possible at each * Load securing package: 2 lashing eyes (6.4 t) front left/right on main frame of bogie platform * 2 pairs of lashing rings (13.4 t) on outer frame front/rear per side; 4 pairs of lashing rings (10 t), swing-out and lowerable per side (front/rear) * All lashing points loadable in all directions and recessed into outer frame * 2 pairs of lashing rings (6.4 t) in excavator arm rest area Nwjdpfx Abel Tik Nj Del * 8 pairs of galvanized folding outriggers for 3 m overall width (not at rear slope) * Extension planks stored left side in a storage box * Excavator arm rest above rear axle to end of rear slope, approx. 2,100 x 740 x 190 mm * Rear mechanical fall supports * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm, incl. hydraulic lateral ramp adjustment & load-holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/-20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, bogie, ramps, outriggers and mechanical fall supports hot-dip galvanized * Axles, drawbar, air reservoir and turntable in black finish * Tires: 235/75 R 17.5 * New vehicle, no initial registration, manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, A7

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm Nwsdpoq Dyvyefx Ab Djl * 40 mm flange towing eye ----Lighting / Electrical: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Trapezoidal-profiled, fold-down steel side walls with drop-side spring assists * Steel rear wall, can be stowed between the ramp holders when not in use, inside in front of the bulkhead * Bolted rear stanchions * Rear drive-on slope approx. 860 mm ----Load Securing: * Perforated outer frame, edged at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t fold-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes for 1.2 t lashing options in bulkhead and rear crossmember ----Ramps: * One-piece mechanical grating drive-up ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible down to 20 mm) ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, rear wall, tailgate, and drive-up ramps * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost ----Info: * — Reinforced and certified body according to EN 12642 XL including load securing certificate — * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 20.500 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 Platform: * EBS (Electronic Braking System) * Emergency release system for spring-loaded brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering device including RTR function * First axle liftable * Last axle is self-steering trailing axle with electro-pneumatic steering lock via reverse gear PIN (Steering lock for trailing axle activated from the tractor for maneuvering purposes—no truck-side installation required—wired to PIN 10 in the 15-pin connector, only for maneuvering and not for use on public roads) * SmartBoard control unit as infotool with pressure sensors for displaying total axle load * Tire pressure monitoring with readout in the truck via EBS signal, no truck-side installation required * Fixed center drawbar with 50 mm flange drawbar eye (loaded 900 mm, mm height adjustment at the head plate) * Mechanical landing gear at the front, mechanical swivel supports at the rear chassis * Hydraulic flow divider * Continuous side walls (without center stanchion) up to the drive-on slope * Folding rear stanchions * Steel rear wall slotted in before rear stanchions * Mechanically adjustable warning panel kit front and rear * Toolboxes made of galvanized steel sheet—black powder-coated—approx. 650 x 300 x 600 mm, right side * 15-pin power connector * LED tail lights * Removable LED rotating beacon incl. bracket and installation * 2 x LED reversing lights at vehicle rear (activated via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wooden floor * 400 mm steel front wall slotted in * Perforated outer frame approx. 45° angled with provisions for mounting 3 t folding lashing rings * In each corner: 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings on each side * Various holes for 1.2 t lashing points in front and rear crossmembers * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways Nwedpfor Dpzxsx Ab Djl * 4-circuit hydraulic control block for potential retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, mechanical rear supports, and loading ramps hot-dip galvanized * Axles, air tanks, flange drawbar eye, and front landing gear painted in black * Hydraulic flow divider in the trailer (for hydraulic pump output in truck from over 40 l/min up to 120 l/min) * New vehicle with manufacturer warranty * Subject to error and prior sale * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Brake System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lift and lower facility ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange drawbar eye Nedpfx Aspk D Dqeb Djwl ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required) * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Provision for retrofitting 20" container locks at front and rear * Bolted bulkhead made of smooth sheet steel * Fold-down side walls, trapezoidal profile, with drop-side spring assists * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Each of the front and rear corners fitted with 1 x 6.3 t lashing ring * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Vehicle fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to error and prior sale ----Delivery Time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: > 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without any installation on the truck side, and additionally via a switch on the trailer). The lock must be disengaged before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required), with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for axle load indication per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED rotating beacon (removable), rear ----General Fittings: * Mechanical warning sign set for 3 m total width * Toolbox made of galvanized steel plate approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle and galvanized steel mudguards rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 stowage compartments with lockable folding lids (folding towards the rear) * Shortening of the low-bed platform by 500 mm to 6,280 mm including extended recess by 500 mm at the front * Rubber covering on the folding frame, approach ramp, and running surface of the low-loader platform * Bamboo wood between the longitudinal beams, in front of the excavator stick rest area ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes in the front corners * 2 x 13.4 t UVV lashing points on each side in the front and rear corners * 5 x 10 t UVV lashing rings on each side (swivelable and lowerable, loadable in all directions) * 4 stake pockets per side with simultaneous 2 t lashing option * 1 x 16 t UVV lashing ring on the rear crossmember ----Width Extension: * Extendable and foldable width supports for 3 m total width (plank holder under the chassis, right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to end beam approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and folding tip approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs on the truck over 40 l/min up to max. 140 l/min) Nedpfxsxptn Do Ab Dowl ----Loading Height: * Loaded: 890 mm +/- 20 mm adjustable via air suspension ----Loading Area Dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading platform: 6,280 + 500 x 2,520 mm, incl. 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, width extension consoles, ramps hot-dip galvanized * Drawbar yoke, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery Time: Available immediately*

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: Nwjdpfex Nli Njx Ab Dsl * Wabco TEBS (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-tonne Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering device ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck display via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing spotlights (switched via reverse gear) * LED lighting ----General fittings: * Aluminium air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame bent at 45°, hole pattern for lashing equipment, lashing force per lashing point 2,000 kg at a spacing of 480 mm * Installation of 3,000 kg drop lashing brackets at approx. 600 mm spacing possible – each side is equipped with 12 pcs. 3,000 kg lashing brackets included in delivery * Each side has 5 pockets for 100 x 50 mm stake posts in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum supports: * 3 pcs. galvanised drum supports secured by container locks with side forklift pockets center/center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross-bracing * Permissible drum weight per cable support 6,000 kg * Without drive and drum brake * Support arm with clamping lock for securing drum shaft * Steel drum shaft 76 mm diameter, with centring and rotating ends * 2 locating rings * 2 centring cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for securing the drum against rotation and uncoiling by the customer ----Loading height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 tonnes GVW possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from week 51/2026

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW axles * Start assist for shunting purposes on the first axle, activated via EBS (without truck-side installation) * Last axle is a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for maneuvering purposes from the driver’s cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering function as well as RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lamps with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swing arm as a carrier for connecting lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Gooseneck platform with 45° chamfered front corners and front-mounted toolbox made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminum side boards (in desired RAL color) foldable and removable along the gooseneck platform * Rear wall, insertable, height 150 mm * Rear incline on the gooseneck platform to the low-bed approx. 700 mm long with checker plate covering and at the end a perforated strip for attaching aluminum approach ramps * Gooseneck platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Tread plate over axles * 9 mechanical extension panels to a total width of 3 m, not included in the rear incline (extension planks available with closed transverse stowage compartment under load floor) Nwodpfx Aoykx Nkjb Djl * Preparation for 3 storage recesses under the gooseneck platform for optional storage of aluminum approach ramps or planks for covering wheel recesses * Preparation for container locks on the swan neck ----Load Securing (LaSi Package): Gooseneck platform: * Perforated outer frame, 45° angled, with hole pattern for lashing devices (2 t lashing capacity per point with a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor per side (1 x on gooseneck platform, 1 x on longitudinal frame after the cranking, 1 x above middle axle next to longitudinal frame) Low-bed platform: * 3 x 13.4 t lashing rings per side at the outer frame (1 x start of gooseneck cranking, 1 x start of approach ramp, 1 x end of approach ramp) * 2 x 10 t lashing rings per side (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side screwed to outer frames of the wheel recesses (2 at front wheel recess, 1 at rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last rigid axle over the steering axle to the end cross member, continuous with internal reinforcing profile approx. W = 770 mm x T rear

Stanje: novo, največja dovoljena obremenitev: 30.440 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40,0 ----Zavore: * Wabco EBS-E (električni zavorni sistem) * Naprava za hitro sprostitev zavore za vzmetne akumulatorske cilindre * Bobnaste zavore ----Osi: * 4 x 11 ton Gigant osi ----Vzmetenje: * Zračno vzmetenje z dvigalom in spuščanjem ter ventilom za ohranjanje višine ----Vlečna naprava: * Naravna vlečna naprava s 50 mm vlečno oglico in nastavljivo višino ----Elektrika / Osvetljava: * Sistem za nadzor tlaka v pnevmatikah z možnostjo prikazovanja na zaslonu tovornjaka preko signala EBS – brez dodatne namestitve na tovornjaku * SmartBoard kot informacijsko orodje z dajalniki tlaka za prikaz obremenitve osi na vsaki skupini osi * 15-polni vtič * LED zadnje luči * LED luči za osvetlitev vseh strani (odstranljive) zadaj ----Splošni dodatni deli: * Paketi opozorilnih tabel spredaj in zadaj * 2 x orodjna omara iz pocinkane, prašno lakirane jeklene pločevine, približno 650 x 300 x 600 mm, na desni strani * Spredaj zaprt, plastičen, posamični blatnik * Zadaj naravna jeklena ščitnika za blatnike, vsak z zaščito proti brizganju (zmanjševanje brizganja) * Stranski zaščitni sistem ----Nizka platforma: * Podaljšana platforma z vrtljivo podvozi za 520 mm, z 45° koti in 3 vgrajenimi predali z pokrovi, ki se lahko zaklenejo * Talna obloga nad platformo z vrtljivo podvozi iz 50 mm, v nizki platformi pa iz 60 mm iglavca * Gumijasta obloga 20 mm namesto lesene talne obloge na območju teka, z dolžino nizke platforme 6.780 mm, vključno z rampo za vožnjo * Gumijasta obloga na rampi za vožnjo, levo in desno, dolžine približno 860 mm * Na vsaki strani 4 žepi za nosilce (vendar nosilci niso vključeni), hkrati pa omogočajo pritrditev tovora z 2 tonami * Hidravlično nastavljivi stranski raztezniki za 3 m širine (vendar ne na zadnji rampi) * Stranske deske za razširitev, shranjene v predalu * Nosilec za roko bagra nad zadnjo osjo do konca rampe za vožnjo, približno D=2.100 mm x Š=740 x G=190 mm * 2 para pritrdilnih točk 6,4 tone, stransko v nosilcu za roko bagra ----Podvozje: * Podvozje iz visoko trdnega jekla z drobno zrnato strukturo ----Pritrditev tovora (paket Lasi): Platforma z vrtljivo podvozi: * 2 para 13,4-tonske pritrdilne točke v zunanjem okvirju platforme z vrtljivo podvozi Nizka platforma: * Na vsaki strani 4 pare 10-tonske pritrdilne točke na zunanjem okvirju, ki se lahko spustijo in so obremenljive v vse smeri * Na zadnji strani, na vsaki strani 2 para pritrdilnih točk 13,4 tone, vrtljivih ----Rampe: * Gumijasta obloga na zložljivih rampah za vožnjo * Hidravlično zložljive rampe z hidravlično nastavljivim vrhom, približno 4.650 x 720 mm * Hidravlična stranska premika rampe in ventili za zadrževanje tovora ----Zadnji opornik: * Hidravlični zadnji opornik ----Razširitev: * 8 parov pocinkanih zložljivih podaljškov za 3 metre skupne širine (vendar ne na zadnji rampi) * Stranske deske za razširitev, shranjene v predalu ----Nosilec za roko bagra: Nsdpfjylfvgex Ab Dowl * hidravlična enota za razdelitev pretoka v prikolici (pri hidravlični moči črpalke v tovornjaku nad 40 - največ 120 l/min) ----Mere za nakladanje: * zadnja nakladalna površina: približno 6.780 x 2.520 mm (vključno z rampo za vožnjo 860 mm) * nakladalna površina nad vrtljivim obročem: približno 2.990 x 2.520 mm ----Višina nakladanja: * približno 890 mm, +/- 20 mm ----Barvanje: * Reflektirajoči obrobni trak na straneh in zadnji strani * Podvozje, vrtljiva platforma, rampe za vožnjo in zložljivi podaljški, vroče pocinkani * Osi, vlečna naprava, zračni rezervoar in vrt

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood Nwedpopk D I Asfx Ab Del * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026

Stanje: novo, največja dovoljena obremenitev: 42.900 kg, skupna masa: 55.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 29.000 mm, skupna širina: 2.540 mm, Oprema: ABS, The complete inventory of vehicles, including those available for immediate and short-term delivery, can be found on our website. Extract from the equipment list. Full specifications available upon request. Loading Platform: * Gooseneck, length approx. 3,900 mm with central beam * Loading platform, double extendable, length approx. 9,300 mm * A support plate, approx. 200 mm wide, is permanently welded to the central beam * Pneumatic locking system with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the current platform length (except for the supply of the first and second locking positions) * Technical fifth wheel load: 25,000 kg Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Brand at our discretion * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for operating hydraulic functions * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable to the outside Nwsdpfxjyvnd No Ab Del * 1 pair of lashing rings at the king pin (LC 10,000 daN) – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets recessed in the outer frame of the gooseneck for plug-in stakes approx. 100 x 50 mm * 1 stake pocket bar mounted transversely on the gooseneck floor for plug-in stakes approx. 100 x 50 mm * 1x at the rear of the gooseneck * 2" king pin * Mechanical landing gear with 2-speed gearbox and crank * 8 pairs of stake pockets recessed in the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed lashing rings in the outer frame of the loading platform, foldable to the outside * Remote steering from the front and rear via cable remote control, with axle tracking control, no installation required in the tractor unit * Last axle with air bellows venting activated when parking brake is applied * Steel front wall, approx. 1,600 mm high, certified design according to EN12642:2016 XL * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light on each side at the landing gear, wired to the tractor unit connection bar * Approx. 32 mm wooden floor on the gooseneck and the loading platform * On the large-section extension tube, one locking position every approx. 500 mm * On the small-section extension tube, one locking position every approx. 1,000 mm, enabling locking at every approx. 500 mm * Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,500 daN) * 4 stake pocket bars mounted transversely on the loading platform floor for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holder mounted under the loading platform * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in the direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in the direction of travel * 1 LED work light each left and right in front of the axles, with wiring * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle equipped with automatic lift axle function as well

Stanje: novo, največja dovoljena obremenitev: 37.350 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Selection of equipment features. Full equipment specification available on request. Chassis: * Welded construction using high-quality steel profiles with through cross-members, designed for high floor and point loads, equipped with heavy-duty outer frame * Rear loading deck as a steel welded construction with two welded-on external driving tracks made of 5-hole steel plate (Lohr/Rolfo pattern) over a length of approx. 2,250 mm, hydraulically lowerable by approx. 350 mm * Integrated at the rear of the vehicle is a hydraulically extendable loading platform (approx. 1,500 mm) as a steel welded construction with 5-hole steel plate (Lohr/Rolfo pattern) cover, lighting mount, and two ramp compartments with ramp supports * Rear operation and control via an electric-hydraulic unit mounted in a stainless steel box on the left side of the chassis, operated by remote control * Power supply via the towing vehicle’s battery * NATO socket on the front wall (no connecting cable to tractor unit) Coupling device: * 2-inch kingpin, replaceable from below Underrun protection: * Fixed installation compliant with EC regulations Landing legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 10 t air suspension axle units, SAF brand with disc brakes approx. 370 x 45 mm, ABS, 10-stud hub-centered ET120 wheel connection, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), air suspension controlled via hand valve with stop function Steering axle: * 3rd axle as trailing steering axle with manual and automatic reverse lock Lifting axle: * 1st axle automatically liftable, additionally switchable via control on chassis frame or via pin 12 of lighting socket Tyres: * 6 units, 445/45R19.5 brand of our choice, mounted on 14.00x19.5 rims, 10-stud ET120 Mudguards: * EC-compliant, 1/4 PVC mudguards before and after the wheels on the 1st axle (front and rear), 2nd and 3rd axles (rear) Nodpfx Aey Up S Sob Dswl Spare wheel holder: * None Brake system: * Two-line brake system according to EC with EBS, automatic load-dependent braking * Spring-loaded brake as parking brake acting on 2 axles, anti-swapping couplings fixed on front cross beam, no connecting line to tractor unit, Wabco brand Lighting system: * EC-compliant, 24-volt, multi-chamber rear lights, license plate lights, LED side marker lights, LED front position lights, and LED lane departure lights at rear, 15-pin socket as well as 2x7-pin sockets fixed on front cross beam, no connecting cables to tractor unit Load securing: * 9 pairs of folding lashing rings evenly distributed, tie-down force approx. 8 t * 7 pairs of folding lashing rings evenly distributed, tie-down force approx. 2.5 t * 2 pairs of folding lashing rings at rear, tie-down force approx. 2.5 t * Drilled holes for tension belts in outer frame every approx. 500 mm Stake pockets: * 16 stakes approx. 100/40 mm, usable length approx. 800 mm Stake pocket holders: * Each side 8 pockets integrated into outer frame * 4 rows of transverse stake pockets across the platform Floor: * Approx. 28 mm Z-hardwood floor set into outer frame Front wall: * Solid front wall, stake holder for 16 stakes approx. 100/40 * Front wall bolted to head frame Equipment: * 2 wheel chocks with holders * 2 PVC toolboxes, approx. 600/400/500 mm * Rear beacon holder including lamp * 2 pcs LED rear ...

Stanje: novo, največja dovoljena obremenitev: 11.400 kg, skupna masa: 15.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.000 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 850 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Metal-Fach T009 Bale Trailer 3-Axle Platform Trailer Flatbed Trailer New Vehicle Year of Manufacture: 2026 Overall dimensions: 11990mm + 800mm x 2480mm x 2900mm Internal dimensions: 9300mm + 800mm x 2380mm x 1875mm Gross weight: 15,000 kg Unladen weight: 3,560 kg Payload: 11,440 kg Loading height: 1,160 mm Tyres: 500/50-17 Extendable loading platform Wide tyres Air brake system Load-dependent brake force regulator (ALB) Side underrun protection Side lighting Parabolic suspension Parking brake Adjustable front and rear loading grids Y-drawbar 40 km/h road approval possible Mudguards Custom paint available !!! ATTENTION – PLEASE READ !!! Nwsdpfxotw N D Ss Ab Dsl We expressly reserve the right to prior sale, as this item is also listed on other platforms. We strongly recommend inspection and verification to avoid any misconceptions regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Images are for illustration purposes and may show optional accessories at additional cost. The internal dimensions stated are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE DEALS AND SURCHARGE POSSIBLE!!! Showground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, največja dovoljena obremenitev: 9.000 kg, skupna masa: 11.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 9.080 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 850 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Metal-Fach T014/2 Bale Trailer 2-axle Platform Trailer Flatbed Trailer New vehicle Year of manufacture: 2026 Overall dimensions: 9089mm + 800mm x 2520mm x 2880mm Internal dimensions: 6409mm + 800mm x 2380mm Loading height: 1150mm Gross weight: 11,600kg Empty weight: 2,600kg Payload: 9,000kg Tyres: 400/60-15.5 Extendable loading platform Wide tyres Nedpfx Aehlr Rdeb Dowl Air-braked ALB valve Side underrun protection Side lighting Parabolic suspension Parking brake Adjustable front and rear loading gates Y-drawbar 40km/h road approval possible Mudguards Custom paint possible IMPORTANT!!!! PLEASE READ!!!! We expressly reserve the right of prior sale as this item is also advertised on other platforms. We strongly recommend an inspection and review to avoid any misunderstandings regarding the condition or suitability of the item. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Images are similar and may show accessories subject to an extra charge. All internal dimensions are approximate. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Showground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday–Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, največja dovoljena obremenitev: 36.040 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 05/2027, skupna širina: 2.550 mm, Oprema: ABS, You will find our complete stock of vehicles, including those available immediately and on short notice, on our website. Excerpt from the equipment/features. Complete specification available upon request. Chassis: * Standard ladder-type steel lightweight frame with continuous cross members * With camber in the chassis frame Nwjdpfx Abey Trwus Dsl * Coupling plate approx. 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337 * Axle lift mechanism on axle 1 * Three-axle SAF INTRADISC assembly with 430 mm disc brakes, ET 120 * Air suspension with approx. 180 mm stroke Tyres: * Wheels with internal sensors according to UN ECE R141 * 6 x 385/65 R 22.5 UNIROYAL TH 506 tyres, steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120) Chassis Attachments: * Mechanical landing gear with compensating foot, approx. 24 t lifting capacity, single-sided operation (right-hand side in direction of travel) * Storage box for 10 drop sides, folding stanchions and tailgate, fully enclosed, splashproof, also serves as lateral underrun protection * 2 waterproof plastic toolboxes, inner dimensions approx. 545 x 400 x 400 mm, installed at rear, one on left and one on right Brake / Air Suspension System: * EBS system 2S/2M with stability program (includes ABS/ALB functions) * EBS connector ISO 7638 (without connecting cables) * Parking brake as spring-loaded brake, external pneumatic connections, as well as external EBS diagnostic connection via ISO 7638 connector * WABCO EBS system * Air suspension system including 1 lift/lower valve, mounted on the left behind the axle group (direction of travel) * Driving position is set automatically * 2 anti-cross-coupling heads at front ISO 1728 * Air tanks for brake and air supply system made of steel (EN 286-2) Floor: * Approx. 30 mm thick panel floor, multiple-glued plywood * Floor sealed all around * Stake pockets for square tube stakes approx. 80 x 80 mm Front Wall: * Storage for up to 14 square tube stakes approx. 80 x 80 (length 1,990 mm) on the inside front wall * Approx. 2,000 mm high, with steel volume corner posts, profiled steel sheeting, bolted/riveted to the frame * 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 * Note: When using the front wall for load securing, appropriate tension belts must be used if the vehicle is operated without side drop sides and tailgate Rear Wall: * ATTENTION: Hinge mounts for foldable rear wall (600 mm) and stanchion mounts for foldable rear corner posts at rear, however, the foldable rear wall and rear corner posts are OMITTED Side Wall: * VarioFix steel perforated external frame * 4 pairs of stanchion mounts for folding stanchions on the external frame (evenly distributed), WITHOUT folding stanchions * Pair of lashing rings in the external frame (to EN 12640), permissible pulling force approx. 5,000 kg per ring Drop Sides: * ATTENTION: Hinge mounts for 5 pairs of drop sides on the external frame and drop side stops at the front corner posts are mounted, but the 5 pairs of drop sides are OMITTED Electrical/Electronics: * Lamp bracket made of steel, located above underrun protection * KÖGEL LUXIMA Premium Package, includes: LED license plate lighting, LED front marker and reflectors, flashing LED side marker lights, Superseal and bayonet lamp connectors * 2 LED outline marker lamps with pendulum mount * 2 multi-chamber tail lights * Fixed adapter box with two 7-pin sockets (1 x ISO 1185 / 1 x

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – without truck-side installation * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord infotool installed with pressure sensors for total axle load display per axle group * Reflective contour tape on the sides and rear Nwedpfx Ajxmpydjb Djl * LED rotating beacon (removable) at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front closed single plastic mudguards * Straight rear steel mudflaps, each with spray suppression * Side underrun protection * Superstructure in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments including lockable folding lids (folding lids opening to the rear) * Chassis made from high-strength fine-grained steel * Floor over the bogie platform made of 50 mm softwood, and 60 mm softwood in the low loader platform * Outer planks of the drive-on ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, 1 pair each of 13.4 t lashing rings at the front and rear outer frame, 1 pair each of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 5 t lashing rings bolted to the outer frame of the wheel recesses (2 at the front recess, 1 at the rear), 2 pairs of 6.4 t lashing rings on the excavator stick holder * 11 pairs of folding outriggers for a total width of 3 meters (not at the rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the widening boards made of sheet steel, mounted transversely to the loading area in front of the first rear axle * Excavator stick holder above the rear axle up to the end of the approach slope approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on the bogie platform) for transporting wheel loaders with a wheelbase of 3,100 - 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area over the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loading height loaded approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding outriggers, rear drop-down supports, and drive-on ramps galvanised * Axles, air tanks, and drawbar painted in black * Tires: 235/75R17.5 * Vehicle is galvanised * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and short-term available units on our website. Extract from the equipment. Complete equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with continuous cross members, designed for high point loads * Underrun beam approx. 700 mm wide * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm * Neck height at the front approx. 130 mm Coupling Equipment * 2-inch king pin Underrun Protection * Bolted version according to EC regulations Side Impact Protection * According to EC regulations, made from anodised aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating pads and single-side operation on the right (FR) Axles * 3 x 9 t air suspension axles with disc brakes, 22.5" * Total lift approx. 180 mm * Lifting and lowering device via rotary valve Brake System * Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-actuated cylinders as parking brake * Reversible coupling heads, fixed to the front cross member, without connecting line to the tractor unit Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120, manufacturer at our discretion * Tyre pressure monitoring (TPMS) via EBS CAN-bus system Mudguards * According to EC regulations Spare Wheel Carrier None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.0 t * In the outer frame, boreholes every approx. 400–600 mm for attaching lashing straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into the outer frame with galvanised omega steel profiles Lighting System * According to EC regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights white front * LED outline lights rear * Licence plate lights * Lane marker lights, LED * 1x15- and 2x7-pin plug sockets at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning signs * Bracket for rotating beacon, incl. rotating beacon * 2 rear rubber buffer stops * Access ladder rear right, foldable and extendable (without platform) * 1 open perforated box transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: single-colour RAL as per request * Chassis: hot-dip galvanised * Outer frame: hot-dip galvanised + single-colour RAL as per request * Centre stanchions: single-colour RAL as per request * Side underrun protection: aluminium, anodised * Underrun protection: white (RAL 9016 traffic white) Njdpfx Asw U H Sbeb Dewl * Attachments: galvanised/KTL black * Rims: silver Contour Marking * Complete, yellow Including Special Accessories * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets transverse to the loading area * 20 stanchions made of galvanised tube 80/50, overall length approx. 1,200 mm * Internal magazine for 20 plug-in stanchions on the front wall * 5 x 25 sideboards and tailboard made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Sideboard and stanchion magazine: insertion

Stanje: novo, največja dovoljena obremenitev: 39.070 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from specifications. Complete specification available upon request. Chassis: * Welded construction made of high-quality steel profiles with punched cross-members. Designed for high point loads Nwedpfoyz E T Sox Ab Dsl * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling Device: * 2-inch kingpin (also suitable for 3.5-inch reception) Underride Guard: * In accordance with EC regulations, bolted design Side Impact Protection: * In accordance with EC regulations Landing Legs: * 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S foot Axles: * 3 x 9 t air suspension axle assembly, manufacturer: SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted 10-hole wheels, offset 120 mm, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via rotary valve with locking function, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted on lifting/lowering device bracket * Smartboard/TIM/Infocenter, no TPMS display Lift Axle: * First axle liftable, fully automatic load-dependent lift control, starting aid via button in the cab (15-pin socket PIN12). Button in cab is not included in delivery Brake System: * Two-line compressed air brake system according to EC guidelines with EBS and RSS, automatic load-sensing, spring-loaded cylinders as parking brake, non-reversible coupling heads fixed to front cross-member, without connecting line to motor vehicle, Wabco brand Tyres: * 6-fold, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand of our choice), offset 120 mm * Basic version tyre pressure monitoring, connected to the EBS CAN bus system * Tyre pressure display in the cab (pre-installed by tractor manufacturer) Mudguards: * In accordance with EC, PVC mudguards (semi-shell) over all axles * Mud flaps with anti-spray Load Securing: * 8 pairs of welded hook plates in the outer frame (tensile strength approx. 3 t) * 6 pairs of lashing rings on the sides of the outer frame, evenly distributed (tensile strength approx. 10 t) Stake Sockets/Posts: * 5 pairs of stake sockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake sockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 removable posts made of galvanized square tubing, approx. 80 x 80 x 4 mm, stop at bottom Front Wall: * Bolted front wall, approx. 1,200 mm high, panelled with sheet metal Stake Magazine: * Magazine for removable posts inside front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting System: * EC-compliant, 24 volt with multi-chamber lights, LED side marker lights, LED front position lights white, LED rear outline marker lights, license plate lights * 1x15-pin and 2x7-pin sockets on the front cross-member Equipment: * Warning panel according to ECE 70 * 2 LED work lights on lamp bracket (switched via reverse gear) * Bracket for revolving beacon at rear (including beacon) * 1 rear access ladder, foldable and extendable (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of front wall * Smartboard with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the support legs (switched via revers

Stanje: novo, največja dovoljena obremenitev: 56.570 kg, skupna masa: 66.500 kg, konfiguracija osi: > 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Extract from the equipment features – full specifications available upon request. Chassis: - Chassis frame construction made of welded longitudinal beams and pass-through cross members - Rear under-run bar approx. 700 mm wide - Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal beams - Cross member spacing max. 400 mm (for longitudinally laid floor) - King pin 3.5 inch according to SAE standard, replaceable - Outer frame as UNP 200, open to the outside Landing Gear: - 24 t telescopic landing gear JOST -MODUL CH (Heavy Duty) S-foot Axles: - 4 x 10 t SAF axles with large drum brake - 22.5 single tires - Axle distances approx. 1,700/1,810/1,810 mm - Air suspension unit, each with 10 t lifting capacity, lifting and lowering device with 1 rotary slide valve Knorr/Wabco - Holder for lifting and lowering device, bolted version Brake: - Smartboard/TIM/Infocenter at the lifting/lowering gear bracket, in addition to the lift/lower valve, without battery (operable only with towing vehicle) - Holder for light and brake at the front, mounted on the underrun bar, total height approx. 700 mm - Tire pressure monitoring basic version, connected to the EBS CAN bus system - With dual release valve for brake and spring actuator - Test nipple for brake cylinder pressure at right front brake cylinder - 1 red and 1 yellow coupling head each - Lifting/lowering device mounted in driving direction rear left - EBS braking system Wabco make, CAN bus EBS diagnostics (EBS plug), no diagnostic cable led outside! Tires: - 8 x 445/65 R 22.5 premium brand tires of our choice - Central centering Lubrication: - Grease nipple strips at the bogies and at the steering front. No central lubrication Superstructure: - Without body certificate according to DIN EN 12642 XL - 2x LED work lights on top of the front wall (facing rear), switch at the lift/lower bracket - Front wall for platform, reinforced version - Side contour marking yellow, rear yellow - Front wall approx. 800 mm high, with sheet metal cladding, bolted version Lighting: - 2x LED work lights, mounted in lamp panel, switched via reverse gear - 2x LED work lights, switched via reverse gear, 1 each side near landing gear - 2x LED reversing lights, 1 per side in front of the 1st axle - Lighting/wiring system brand of our choice - Number plate lighting - The towing vehicle must provide sufficient electrical capacity for the chosen lighting (esp. reversing light) - Position marker lights at the front, lower, white, 1 per side left and right (LED) - 24V lighting system with large multifunction rear lamp - Side marker lights (LED) flashing - 1x 15-pin and 2x 7-pin sockets in multifunction box at the front - EBS socket output - 1 pair lane keeping lights (LED) Floor: - Hardwood floor approx. 28 mm, alternating with galvanized omega steel profiles Paint/Coating (no metallic shades): - Chassis painted in RAL color of choice - Front wall (steel construction) in RAL color of choice - Axle hubs matching chassis color - Axles and landing gear black - Wheels in aluminum/silver similar to RAL 9006 - Wheel nuts untreated - Under-run protection painted RAL 9010 pure white (aluminum) Accessories: - Lifting device for 1st axle Nwsdpfx Aswx Dcteb Dsl - 9 welded lashing plate hooks per side in the outer frame, lashing capacity max. 3,000 daN each - 12 RUD-SLP lashing points per side with

Stanje: novo, največja dovoljena obremenitev: 52.810 kg, skupna masa: 63.000 kg, konfiguracija osi: > 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, featuring vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available upon request. Loading platform: * Platform with approx. 30 mm thick hardwood floor * 10 pairs of hinged external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system in compliance with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For proper display, the tractor unit must be capable of transmitting and displaying this data. Axles and suspension: * BPW axles, technical load capacity 12,000 kg each, first axle rigid, all other axles hydro-mechanically force-steered, mounted on turntables * Air suspension with lift and lower valve * Axle tools Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking system: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor Steel construction: * Steel structure made of high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (Yield strength 355MPa), S690QL/S700MC (Yield strength 690MPa) Painting: * Entire steel structure automatically shot-blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of two-component topcoat, single colour in RAL 1007 Daffodil Yellow, as per RAL 841GL system * Rear section metallized and painted in RAL 9010 (Pure White) * Rims Silver Grey * Paint system tested in salt spray test according to ISO 9227-NSS * All cavities sealed with special wax Including accessories: * Platform with approx. 30 mm thick hardwood floor * 2 inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanized front connection strip * At the gooseneck and rear plate left and right one bracket each for warning signs including socket * Steering from front and rear via wired remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic unit Nwedpfx Abjxttc Ae Dol * 12 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes on the outer frame of the platform * Load pressure gauge for axle load determination including load diagram * Lift axle on the front axle controlled by TEBS E * 5 pairs of stake pocket strips across the platform for approx. 100 x 50 mm plug-in stakes * One INOX toolbox 1,200 x 460 x 550 mm, mounted at the front left underneath the platform (in direction of travel) * 1 tow coupling with reinforcement bolted to the rear crossmember * BEKAMAX central lubrication system (Pico) with NLGI-2 standard grease and removable protection for the pump * 2 LED reversing lights mounted on the rear plate * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum)

Stanje: rabljeno, največja dovoljena obremenitev: 14.170 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2006, dolžina tovornega prostora: 6.530 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.550 mm, Skupna masa: 18.000 kg Nwodpfxew N A Eys Ab Djl Lastna masa: 3.830 kg Nosilnost: 14.170 kg Skupna dolžina: 8.550 mm Dolžina nakladanja: 6.530 mm Širina: skupna širina 2.550 mm / širina nakladanja 2.540 mm Višina nakladanja: pribl. 1.000 mm Dodatne informacije - Tla iz trdega lesa z Omega profili - Stranske stranice prisotne - Dvojna kolesa - BPW osi - Prstani za privezovanje - LED vzvratne luči

Stanje: novo, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, skupna višina: 1.180 mm, Oprema: ABS, Availability: Immediate NEW VEHICLE Kässbohrer Platform Light MEGA SPS 3 # Unladen weight: 6,100 kg # Fifth-wheel load: 15,000 kg # Coupling height: 980 mm # BPW axles with disc brakes # 1st axle liftable # Jost landing legs 24 t # Wabco 4S/2M EBS with RSS # 2 x 7-pin and 1 x 15-pin electrical connections # 24V Aspöck lighting system # Tyres: 6 x 445/45 R19.5 premium brand tyres on steel rims # 2 plastic wheel chocks Equipment: # 30 mm hardwood floor # Oversize equipment (4x galvanized illuminated oversize signs with LEDs + 1 x rotating beacon) # 2 stainless steel toolboxes mounted on right & left (in direction of travel) # 6x2 Jost recessed container locks # Stake holder mounted on front wall + 20 stakes (1,500 mm) # 4 rows of stake pockets # 10 x 2 stake pockets in the chassis frame # 7 x 2 lashing rings 4 t on the platform, 108 lashing points in the outer frame, each 2 t # Side boards 600 mm high, removable, incl. storage compartment under the vehicle # Chassis KTL-coated and painted in RAL 3020 # Front wall RAL 3020 Nwodpfx Abovm Nm Ij Del ----Subject to errors, changes, and prior sale! Location: KTH-Trailer GmbH in Goch

Stanje: rabljeno, največja dovoljena obremenitev: 21.320 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, dolžina tovornega prostora: 13.550 mm, višina nakladalnega prostora: 800 mm, Leto izdelave: 2022,

Stanje: rabljeno, Leto izdelave: 2012, tip droga: simpleks, dvižna višina: 15.720 mm, Izvedba nosilnega stebra: teleskopski krak, nosilnost 300 kg, maksimalna višina dviga: 15720 mm, omrežni vtič: Schuko 230 V, delovna višina: 15,72 m, stranski doseg: 7,24 m, nosilnost: 300 kg, dolžina: 6,45 m, širina: 1,75 m, višina: 2,01 m, lastna teža: 6.622 kg, baterija 8 x 6V 320 Ah (NOVA), vgrajen polnilnik. Nsdpfszxutmsx Ab Dewl

Stanje: rabljeno, Leto izdelave: 2013, dvižna višina: 6.100 mm, skupna višina: 1.820 mm, Nosilnost 300 kg, gradbena višina: 1820 mm, višina dviga: 6100 mm, gradbena širina: 760 mm, rabljena dvižna škarjasta ploščad JLB 2030ES, svetle pnevmatike, dolžina naprave 2300 mm, delovna višina 8,10 m, višina platforme v iztegnjenem položaju 6,10 m, gradbena višina 1820 mm, širina nosilca vilic: 760 mm. Nwjdpow Uu Nbefx Ab Djl

Stanje: rabljeno, številka stroja/vozila: UH9PTC240B6NS1958, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 1.100 mm, Leto izdelave: 2016, = Dodatne možnosti in oprema = - Zračno vzmetenje zadaj - Zračno vzmetenje spredaj = Dodatne informacije = Teže Nosilnost: 24.000 kg Skupna dovoljena masa: 5.800 kg Stanje Nodozbqcqjpfx Ab Dowl Splošno stanje: povprečno Tehnično stanje: povprečno Vizualno stanje: povprečno Dodatne informacije Stanje pnevmatik spredaj: 60% Stanje pnevmatik zadaj: 60% Pnevmatike spredaj: 265/70 R 19.5 Pnevmatike zadaj: 265/70 R 19.5 Zadnji pregled: 2026-05-29 Dodatne informacije Za več informacij se obrnite na Lastas Sales.