Priklopnik sedeža z delovno ploščadjo

KÖGEL Multi Chassis, verstärkt

You will find our complete stock of vehicles, including those available immediately and on short notice, on our website.

Excerpt from the equipment/features. Complete specification available upon request.

Chassis:
* Standard ladder-type steel lightweight frame with continuous cross members
* With camber in the chassis frame
* Coupling plate approx. 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337
* Axle lift mechanism on axle 1
* Three-axle SAF INTRADISC assembly with 430 mm disc brakes, ET 120
* Air suspension with approx. 180 mm stroke

Tyres:
* Wheels with internal sensors according to UN ECE R141
* 6 x 385/65 R 22.5 UNIROYAL TH 506 tyres, steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120)

Chassis Attachments:
* Mechanical landing gear with compensating foot, approx. 24 t lifting capacity, single-sided operation (right-hand side in direction of travel)
* Storage box for 10 drop sides, folding stanchions and tailgate, fully enclosed, splashproof, also serves as lateral underrun protection
* 2 waterproof plastic toolboxes, inner dimensions approx. 545 x 400 x 400 mm, installed at rear, one on left and one on right

Brake / Air Suspension System:
* EBS system 2S/2M with stability program (includes ABS/ALB functions)
* EBS connector ISO 7638 (without connecting cables)
* Parking brake as spring-loaded brake, external pneumatic connections, as well as external EBS diagnostic connection via ISO 7638 connector
* WABCO EBS system
* Air suspension system including 1 lift/lower valve, mounted on the left behind the axle group (direction of travel)
* Driving position is set automatically
* 2 anti-cross-coupling heads at front ISO 1728
* Air tanks for brake and air supply system made of steel (EN 286-2)

Floor:
* Approx. 30 mm thick panel floor, multiple-glued plywood
Klodoy Trwuepfx Ab Est
* Floor sealed all around
* Stake pockets for square tube stakes approx. 80 x 80 mm

Front Wall:
* Storage for up to 14 square tube stakes approx. 80 x 80 (length 1,990 mm) on the inside front wall
* Approx. 2,000 mm high, with steel volume corner posts, profiled steel sheeting, bolted/riveted to the frame
* 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640
* Note: When using the front wall for load securing, appropriate tension belts must be used if the vehicle is operated without side drop sides and tailgate

Rear Wall:
* ATTENTION: Hinge mounts for foldable rear wall (600 mm) and stanchion mounts for foldable rear corner posts at rear, however, the foldable rear wall and rear corner posts are OMITTED

Side Wall:
* VarioFix steel perforated external frame
* 4 pairs of stanchion mounts for folding stanchions on the external frame (evenly distributed), WITHOUT folding stanchions
* Pair of lashing rings in the external frame (to EN 12640), permissible pulling force approx. 5,000 kg per ring

Drop Sides:
* ATTENTION: Hinge mounts for 5 pairs of drop sides on the external frame and drop side stops at the front corner posts are mounted, but the 5 pairs of drop sides are OMITTED

Electrical/Electronics:
* Lamp bracket made of steel, located above underrun protection
* KÖGEL LUXIMA Premium Package, includes: LED license plate lighting, LED front marker and reflectors, flashing LED side marker lights, Superseal and bayonet lamp connectors
* 2 LED outline marker lamps with pendulum mount
* 2 multi-chamber tail lights
* Fixed adapter box with two 7-pin sockets (1 x ISO 1185 / 1 x

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.