Priklopnik sedeža z delovno ploščadjoES-GE
3-Achs Sattelanhänger - Bordwände + CV
Priklopnik sedeža z delovno ploščadjo
ES-GE
3-Achs Sattelanhänger - Bordwände + CV
Stanje
Novo
Lokacija
Essen 

Osnovni podatki
- Proizvajalec:
- ES-GE
- Stanje:
- novo
Cena in lokacija
- Lokacija prodajalca:
- Heegstraße 6-8, 45356 Essen, Nemčija

Pokliči
Tehnične podrobnosti
Dimenzije in teža
Skupna masa:
43.000 kg
Skupna širina:
2.550 mm
Osi in kolesa
Konfiguracija osi:
3 osi
Varnostne funkcije
ABS
Podrobnosti ponudbe
- ID oglasa:
- A199-16-705
- Referenčna številka:
- 36623
- Posodobitev:
- nazadnje dne 28.10.2025
Opis
You can find our complete range of vehicles with immediately and short-term available units on our website.
Extract from the equipment. Complete equipment list available on request.
Chassis:
* Welded construction made from high-quality steel profiles with continuous cross members, designed for high point loads
* Underrun beam approx. 700 mm wide
* Outer frame as UNP profile
* Fifth wheel plate approx. 8 mm
* Neck height at the front approx. 130 mm
Coupling Equipment
* 2-inch king pin
Underrun Protection
* Bolted version according to EC regulations
Side Impact Protection
* According to EC regulations, made from anodised aluminium profiles
Landing Legs
* 2 x 12 t landing legs with compensating pads and single-side operation on the right (FR)
Axles
* 3 x 9 t air suspension axles with disc brakes, 22.5"
* Total lift approx. 180 mm
* Lifting and lowering device via rotary valve
Brake System
* Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control
* Spring-actuated cylinders as parking brake
* Reversible coupling heads, fixed to the front cross member, without connecting line to the tractor unit
Tyres
* 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120, manufacturer at our discretion
* Tyre pressure monitoring (TPMS) via EBS CAN-bus system
Mudguards
* According to EC regulations
Spare Wheel Carrier
None
Itedpfxjw U H Sbe Ac Esp
Load Securing
* 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 5.0 t
* 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.0 t
* In the outer frame, boreholes every approx. 400–600 mm for attaching lashing straps
Front Wall
* Reinforced steel construction, fixed, approx. 1,400 mm high
* Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high)
Floor
* Approx. 28 mm Z-hardwood floor recessed into the outer frame with galvanised omega steel profiles
Lighting System
* According to EC regulations, 24 Volt, with multi-chamber lights
* LED side marker lights
* LED position lights white front
* LED outline lights rear
* Licence plate lights
* Lane marker lights, LED
* 1x15- and 2x7-pin plug sockets at the front cross member
Equipment
* 2 wheel chocks with holders
* ECE 70 warning signs
* Bracket for rotating beacon, incl. rotating beacon
* 2 rear rubber buffer stops
* Access ladder rear right, foldable and extendable (without platform)
* 1 open perforated box transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles
Paintwork
* Front wall: single-colour RAL as per request
* Chassis: hot-dip galvanised
* Outer frame: hot-dip galvanised + single-colour RAL as per request
* Centre stanchions: single-colour RAL as per request
* Side underrun protection: aluminium, anodised
* Underrun protection: white (RAL 9016 traffic white)
* Attachments: galvanised/KTL black
* Rims: silver
Contour Marking
* Complete, yellow
Including Special Accessories
* First axle liftable, with fully automatic, load-dependent lifting control
* 10 pairs of stanchion pockets in the outer frame, evenly distributed
* 4 rows of stanchion pockets transverse to the loading area
* 20 stanchions made of galvanised tube 80/50, overall length approx. 1,200 mm
* Internal magazine for 20 plug-in stanchions on the front wall
* 5 x 25 sideboards and tailboard made of anodised aluminium hollow profiles, foldable and removable
* Removable Kinnegrip stanchions
* Sideboard and stanchion magazine: insertion
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
Extract from the equipment. Complete equipment list available on request.
Chassis:
* Welded construction made from high-quality steel profiles with continuous cross members, designed for high point loads
* Underrun beam approx. 700 mm wide
* Outer frame as UNP profile
* Fifth wheel plate approx. 8 mm
* Neck height at the front approx. 130 mm
Coupling Equipment
* 2-inch king pin
Underrun Protection
* Bolted version according to EC regulations
Side Impact Protection
* According to EC regulations, made from anodised aluminium profiles
Landing Legs
* 2 x 12 t landing legs with compensating pads and single-side operation on the right (FR)
Axles
* 3 x 9 t air suspension axles with disc brakes, 22.5"
* Total lift approx. 180 mm
* Lifting and lowering device via rotary valve
Brake System
* Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control
* Spring-actuated cylinders as parking brake
* Reversible coupling heads, fixed to the front cross member, without connecting line to the tractor unit
Tyres
* 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120, manufacturer at our discretion
* Tyre pressure monitoring (TPMS) via EBS CAN-bus system
Mudguards
* According to EC regulations
Spare Wheel Carrier
None
Itedpfxjw U H Sbe Ac Esp
Load Securing
* 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 5.0 t
* 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.0 t
* In the outer frame, boreholes every approx. 400–600 mm for attaching lashing straps
Front Wall
* Reinforced steel construction, fixed, approx. 1,400 mm high
* Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high)
Floor
* Approx. 28 mm Z-hardwood floor recessed into the outer frame with galvanised omega steel profiles
Lighting System
* According to EC regulations, 24 Volt, with multi-chamber lights
* LED side marker lights
* LED position lights white front
* LED outline lights rear
* Licence plate lights
* Lane marker lights, LED
* 1x15- and 2x7-pin plug sockets at the front cross member
Equipment
* 2 wheel chocks with holders
* ECE 70 warning signs
* Bracket for rotating beacon, incl. rotating beacon
* 2 rear rubber buffer stops
* Access ladder rear right, foldable and extendable (without platform)
* 1 open perforated box transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles
Paintwork
* Front wall: single-colour RAL as per request
* Chassis: hot-dip galvanised
* Outer frame: hot-dip galvanised + single-colour RAL as per request
* Centre stanchions: single-colour RAL as per request
* Side underrun protection: aluminium, anodised
* Underrun protection: white (RAL 9016 traffic white)
* Attachments: galvanised/KTL black
* Rims: silver
Contour Marking
* Complete, yellow
Including Special Accessories
* First axle liftable, with fully automatic, load-dependent lifting control
* 10 pairs of stanchion pockets in the outer frame, evenly distributed
* 4 rows of stanchion pockets transverse to the loading area
* 20 stanchions made of galvanised tube 80/50, overall length approx. 1,200 mm
* Internal magazine for 20 plug-in stanchions on the front wall
* 5 x 25 sideboards and tailboard made of anodised aluminium hollow profiles, foldable and removable
* Removable Kinnegrip stanchions
* Sideboard and stanchion magazine: insertion
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2003
59 Oglasi na spletu
Pošlji povpraševanje
Telefon & Faks
+49 201 8... oglasi
Ti oglasi bi vas prav tako lahko zanimali.
Uspešno
Vaše sporočilo je bilo poslano.
Mali oglas
Essen
835 km
Priklopnik sedeža z delovno ploščadjo
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Uspešno
Vaše sporočilo je bilo poslano.
Mali oglas
Renswoude
953 km
Nooteboom MCO-S-48-03 | HIDRAVLIČNE RAMPE / MOST / KRMILJENJE
NooteboomMCO-S-48-03 | HYDRO RAMPS / BRIDGE / STEERING |
NooteboomMCO-S-48-03 | HYDRO RAMPS / BRIDGE / STEERING |
Uspešno
Vaše sporočilo je bilo poslano.
Mali oglas
Coesfeld
859 km
Vakumska cisterna
DAFXF530 FT 4x2 mit Kroll, ADR Saug- /Druckanhänger
DAFXF530 FT 4x2 mit Kroll, ADR Saug- /Druckanhänger
Uspešno
Vaše sporočilo je bilo poslano.
Mali oglas
Hedel
945 km
Volvo FH540 6x2!! TOVORNJAK Z DVIGALOM/HIAB 55 tm! ODLIČNO! DK1315
VolvoFH540 6x2!! KRAANWAGEN/HIAB 55tm! TOP!
VolvoFH540 6x2!! KRAANWAGEN/HIAB 55tm! TOP!
Uspešno
Vaše sporočilo je bilo poslano.
Mali oglas
Dortmund
815 km
Platforma
MAX Trailer3-Achs-Tele-Plateau-zwangsgelenkt
MAX Trailer3-Achs-Tele-Plateau-zwangsgelenkt
Uspešno
Vaše sporočilo je bilo poslano.
Mali oglas
Gilze
949 km
DAF CF 440 6X2*4 / HMF 40 tm DVIŽNA ROKA / ŽERJAV
DAFCF 440 6X2*4 / HMF 40 tm CRANE / KRAN
DAFCF 440 6X2*4 / HMF 40 tm CRANE / KRAN
Uspešno
Vaše sporočilo je bilo poslano.
Mali oglas
Lübbecke
828 km
DAF XF 106 510 SSC vlačilec - en lastnik
DAFXF 106 510 SSC 1-Hand
DAFXF 106 510 SSC 1-Hand
Uspešno
Vaše sporočilo je bilo poslano.
Mali oglas
Mainz
661 km
Zabojnik za pisarne
Bürocontainer
Bürocontainer
Uspešno
Vaše sporočilo je bilo poslano.
Mali oglas
Wien
252 km
Transportni zabojnik
20 Fuß RAL9005 CONTAINER SEECONTAINERLAGERCONTAINER SELF STORAGE NEU
20 Fuß RAL9005 CONTAINER SEECONTAINERLAGERCONTAINER SELF STORAGE NEU
Uspešno
Vaše sporočilo je bilo poslano.
Mali oglas
Triptis
562 km
Odprta polprikolica
Fliegl3-Achs Plateau Sattel SDS 380 Mega
Fliegl3-Achs Plateau Sattel SDS 380 Mega
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake
































































































































































