Priklopnik sedeža z delovno ploščadjoMÜLLER-MITTELTAL
3- achs Satteltiefl.-Luft-Lenk-hydr. Auffahrram.
Priklopnik sedeža z delovno ploščadjo
MÜLLER-MITTELTAL
3- achs Satteltiefl.-Luft-Lenk-hydr. Auffahrram.
Fiksna cena plus DDV
69.900 €
(83.181 € bruto)
Leto izdelave
2026
Stanje
Novo
Lokacija
Egestorf 

Prikaži slike
Prikaži karto
Osnovni podatki
Cena in lokacija
Fiksna cena plus DDV
69.900 €
(83.181 € bruto)
- Lokacija prodajalca:
- Eichenstich 12, 21272 Egestorf, Nemčija

Pokliči
Tehnične podrobnosti
- Največja dovoljena obremenitev:
- 38.290 kg
- Skupna masa:
- 48.000 kg
- Konfiguracija osi:
- 3 osi
- Dolžina tovornega prostora:
- 8.500 mm
- Širina tovornega prostora:
- 2.520 mm
Podrobnosti ponudbe
- ID oglasa:
- A128-69-462
- Referenčna številka:
- 59311
- Posodobitev:
- nazadnje dne 14.02.2026
Opis
* TS 3 Profile 30.0:
----Braking system:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring actuators
* Drum brakes
----Axles:
* 3 x 11 t BPW Eco Plus axles
* Last axle self-steering with electro-pneumatic steering lock
----Suspension:
* Air suspension with lift and lower system plus RtR valve
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* Smartboard control unit mounted on the trailer as an infotool with pressure sensors to display total axle load
* 15-pin power connector
* LED lighting system 12/24V
* Removable LED beacon at the rear left
----General fittings:
* Side underrun protection
* Landing gears at the front and mechanical swiveling supports at the rear of the chassis
* Straight steel mudguards
* Spare wheel holder mounted on the right side under the chassis
----Low-loader platform:
* Saddle platform with 45° chamfered front corners and front tool box made of galvanized sheet steel (W = 2,480 x H = 500 x L = 665 mm) with folding lid
* 400 mm high, foldable and removable aluminum side boards (RAL 9010 pure white) on the saddle platform
* Rear wall -150 mm- plugged in at the back
* Rear slope on the saddle platform to the low-bed approx. 700 mm long
* Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks
* Tread plate above the axles
----Extensions:
* 8 x mechanical folding extensions up to 3 m overall width, but not in the rear slope (extension planks available with storage on the saddle platform)
* Mechanically adjustable warning sign packages at the front and rear
----Load securing (Lashing package):
* On the saddle platform, 2 x 6.3 t lashing points each as well as 3 x 5 t lashing bars on each side of the outer frame
* On the low-bed platform, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame
* 2 x 6.4 t lashing eyes on each side as well as 1 lashing point in the excavator stick recess at the rear
* 2 x container locks directly after the gooseneck on the low-bed platform
----Excavator stick recess:
* Excavator stick recess from the end of the last rigid axle via the steering axle to the rear cross member, continuous with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm
----Drive-on ramps:
* Mechanical one-piece hot-dip galvanized hydraulic drive-on ramps approx. 3,000 x 720 mm (mechanically adjustable sideways)
* 4-way control block for future customer-side retrofit of hydraulic ramp adjustment
* The outer slat of the drive-on ramp is made of 50 mm hardwood
* Climbing strips on the outer frame of the ramp and on the drive-up slope
----Hydraulics:
* Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck between 40 and 120 l/min)
----Loading dimensions:
* Loading area saddle platform: approx. 3,935 x 2,480 mm
* Low-bed loading area: approx. 8,500 x 2,520 mm
* Loading height unladen approx. 910 mm (incl. 860 mm drive-on slope)
----Fifth wheel height:
* Approx. 1,220 mm (suitable for 2- and 3-axle tractors)
----Paintwork:
* Chassis, drive-on ramps, rear folding supports, extension brackets hot-dip galvanized
* Axles, landing gears, air tanks painted in a black tone
* Vehicle is hot-dip galvanized
Kjdpfx Abepk D I Ao Help
----Information:
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Sample images may include equipment not matching the offered vehicle
----Delivery time:
* Available
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
----Braking system:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring actuators
* Drum brakes
----Axles:
* 3 x 11 t BPW Eco Plus axles
* Last axle self-steering with electro-pneumatic steering lock
----Suspension:
* Air suspension with lift and lower system plus RtR valve
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* Smartboard control unit mounted on the trailer as an infotool with pressure sensors to display total axle load
* 15-pin power connector
* LED lighting system 12/24V
* Removable LED beacon at the rear left
----General fittings:
* Side underrun protection
* Landing gears at the front and mechanical swiveling supports at the rear of the chassis
* Straight steel mudguards
* Spare wheel holder mounted on the right side under the chassis
----Low-loader platform:
* Saddle platform with 45° chamfered front corners and front tool box made of galvanized sheet steel (W = 2,480 x H = 500 x L = 665 mm) with folding lid
* 400 mm high, foldable and removable aluminum side boards (RAL 9010 pure white) on the saddle platform
* Rear wall -150 mm- plugged in at the back
* Rear slope on the saddle platform to the low-bed approx. 700 mm long
* Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks
* Tread plate above the axles
----Extensions:
* 8 x mechanical folding extensions up to 3 m overall width, but not in the rear slope (extension planks available with storage on the saddle platform)
* Mechanically adjustable warning sign packages at the front and rear
----Load securing (Lashing package):
* On the saddle platform, 2 x 6.3 t lashing points each as well as 3 x 5 t lashing bars on each side of the outer frame
* On the low-bed platform, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame
* 2 x 6.4 t lashing eyes on each side as well as 1 lashing point in the excavator stick recess at the rear
* 2 x container locks directly after the gooseneck on the low-bed platform
----Excavator stick recess:
* Excavator stick recess from the end of the last rigid axle via the steering axle to the rear cross member, continuous with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm
----Drive-on ramps:
* Mechanical one-piece hot-dip galvanized hydraulic drive-on ramps approx. 3,000 x 720 mm (mechanically adjustable sideways)
* 4-way control block for future customer-side retrofit of hydraulic ramp adjustment
* The outer slat of the drive-on ramp is made of 50 mm hardwood
* Climbing strips on the outer frame of the ramp and on the drive-up slope
----Hydraulics:
* Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck between 40 and 120 l/min)
----Loading dimensions:
* Loading area saddle platform: approx. 3,935 x 2,480 mm
* Low-bed loading area: approx. 8,500 x 2,520 mm
* Loading height unladen approx. 910 mm (incl. 860 mm drive-on slope)
----Fifth wheel height:
* Approx. 1,220 mm (suitable for 2- and 3-axle tractors)
----Paintwork:
* Chassis, drive-on ramps, rear folding supports, extension brackets hot-dip galvanized
* Axles, landing gears, air tanks painted in a black tone
* Vehicle is hot-dip galvanized
Kjdpfx Abepk D I Ao Help
----Information:
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Sample images may include equipment not matching the offered vehicle
----Delivery time:
* Available
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2001
180 Oglasi na spletu
Pošlji povpraševanje
Telefon & Faks
+49 40 33... oglasi
Ti oglasi bi vas prav tako lahko zanimali.
Mali oglas
Egestorf
860 km
Polpriklopnik z nizko nakladalno ploščadjo
MÜLLER-MITTELTAL3- achs Satteltiefl.-Luft-Lenk-hydr. Auffahrram.
MÜLLER-MITTELTAL3- achs Satteltiefl.-Luft-Lenk-hydr. Auffahrram.
Mali oglas
Legden
847 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEF-S43-1AAF Multimax Tieflader,Radmulden 45 t.
FAYMONVILLEF-S43-1AAF Multimax Tieflader,Radmulden 45 t.
Mali oglas
Kaltenkirchen
925 km
Nizki nakladalnik
HumbaurHumbaur 3-Achs Auflieger LIA&NLA/verzinkt/3mPaket/Hydr.
HumbaurHumbaur 3-Achs Auflieger LIA&NLA/verzinkt/3mPaket/Hydr.
Mali oglas
Landsberg am Lech
379 km
Polpriklopnik z nizko nakladalno ploščadjo
LANGENDORFS3L 2teilige Rampen Stielmulde
LANGENDORFS3L 2teilige Rampen Stielmulde
Mali oglas
Veghel
920 km
Nizki nakladalnik
Nükte TrailerNEW! Ramps Lift Axle
Nükte TrailerNEW! Ramps Lift Axle
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake
















































































































































