Langendorf Satu 50 Low-Bed Semi-Trailer / 2024 / 54 nakup rabljenega (43.979)

Stanje: rabljeno, številka stroja/vozila: XMR0SD00080000675, konfiguracija osi: 3 osi, prva registracija: 01/2008, skupna dolžina: 13.100 mm, skupna širina: 2.500 mm, skupna višina: 1.400 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2008, Poseben prevoz Nizkopodni polpriklopnik: ✓ Izvlečljiv: ✓ Rezervoar Gorivo: ✓ = Dodatne informacije = Velikost pnevmatik: 245/70 R17.5 Znamka osi: Saf Zavore: Bobnaste zavore Dodpfx Asu H Ai Hofqowb Vzmetenje: Zračno vzmetenje Os 1: Dvojna montaža; profil pnevmatike levo zunaj: 50%; profil pnevmatike desno zunaj: 70% Os 2: Dvojna montaža; profil pnevmatike levo zunaj: 90%; profil pnevmatike desno zunaj: 85% Os 3: Dvojna montaža; Krmiljena; profil pnevmatike levo zunaj: 50%; profil pnevmatike desno zunaj: 70% Največja dovoljena skupna masa: 45.000 kg Registrska številka: C270710 = Podatki o podjetju = Za več informacij o tej enoti pokličite: ali pošljite e-pošto na: . Celoten pregled zaloge najdete na: . Ne pozabite se naročiti na naš e-novice za tedenske posodobitve o naši zalogi.

Stanje: rabljeno, številka stroja/vozila: YAMT14XX5K0104637, konfiguracija osi: > 3 osi, prva registracija: 01/2020, skupna dolžina: 14.100 mm, skupna širina: 2.550 mm, skupna višina: 3.350 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: drugo, Leto izdelave: 2020, Chassis Chassis height: 90 cm Kingpin diameter / fifth wheel: 2 inch Structure Deck height: 120 cm Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Axle spacing length: 90 cm Loading platform length: 930 cm Ramp length: 405 cm Gooseneck length: 430 cm Maximum width: 305 cm (20 cm + 20 cm) Maximum length: 930 cm Extendable: ✓ Tank Fuel: ✓ = Further Information = Axle configuration Tyre size: 235/75 R17.5 Axle brand: SAF Brakes: drum brakes Suspension: air suspension Axle 1: twin tyres; lift axle; left outer tyre tread: 15%; right outer tyre tread: 80% Axle 2: twin tyres; left outer tyre tread: 60%; right outer tyre tread: 50% Axle 3: twin tyres; steering; left outer tyre tread: 70%; right outer tyre tread: 70% Dsdpfx Aeu H D Tajfqjwb Axle 4: twin tyres; steering; left outer tyre tread: 75%; right outer tyre tread: 65% Weights Unladen weight: 11,480 kg Payload: 49,320 kg GVW: 60,800 kg Features Body manufacturer: Faymonville Loading platform height: 90 cm Identification Registration number: C525073 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: rabljeno, številka stroja/vozila: YAFTL408100008968, konfiguracija osi: > 3 osi, prva registracija: 01/2008, skupna dolžina: 13.400 mm, skupna širina: 2.750 mm, skupna višina: 3.400 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2008, = Additional Options and Equipment = - Steering axle - Drum brakes = Remarks = Dwodjxhgirepfx Afqjb Chassis Diameter of kingpin / fifth wheel: 2 inch Height of kingpin / drawbar: 120 cm Drum brake: ✓ Structure Year of manufacture: 2008 = Further Information = Axle Configuration Axle brand: Gigant Brakes: Drum brakes Suspension: Air suspension Front axle: Tire size: 245/70 R17.5; Tire tread left: 60%; Tire tread right: 35% Center axle: Tire size: 245/70 R22.5; Tire tread left: 25%; Tire tread right: 50% Rear axle 1: Tire size: 245/70 R17.5; Steering; Tire tread left: 45%; Tire tread right: 20% Rear axle 2: Tire size: 245/70 R17.5; Steering; Tire tread left: 50%; Tire tread right: 60% Weights Unladen weight: 17,500 kg Payload: 47,500 kg Gross vehicle weight: 65,000 kg Functional Body brand: Faymonville = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: rabljeno, številka stroja/vozila: XMR0SD00090002037, konfiguracija osi: > 3 osi, prva registracija: 05/2010, skupna dolžina: 13.300 mm, skupna širina: 2.550 mm, skupna višina: 3.200 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2010, = Additional options and accessories = - Drum brakes = Notes = Chassis Diameter of kingpin / fifth wheel: 2 inch Height of kingpin / drawbar: 120 cm Drum brakes: ✓ Structure Year of manufacture: 2010 Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Length over axles: 890 cm Loading platform length: 890 cm Gooseneck length: 375 cm Dedjxyff Ajpfx Afqswb Maximum width: 305 cm (25 cm +25 cm) Extendable: ✓ Telescopic: ✓ = Further information = Technical information Chassis: Nooteboom OSDS-58-04V Gross vehicle weight: 58,000 kg Axle configuration Tyre size: 245/70 R17.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Front axle: Twin tyres; Left outer tyre tread: 45%; Right outer tyre tread: 35% 1st central axle: Twin tyres; Left outer tyre tread: 70%; Right outer tyre tread: 75% 2nd central axle: Twin tyres; Steered; Left outer tyre tread: 80%; Right outer tyre tread: 45% Rear axle: Twin tyres; Steered; Left inner tyre tread: 50%; Right inner tyre tread: 50% Functional Body make: Nooteboom OSDS-58-04V Identification Registration number: C307432 = Company information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: rabljeno, številka stroja/vozila: ***XL931N5GC6L007092, prva registracija: 01/2006, velikost pnevmatike: 285/70 R19.5, konfiguracija osi: 3 osi, barva: drugo, vzmetenje: zrak, skupna dolžina: 12.400 mm, skupna širina: 2.500 mm, skupna višina: 3.350 mm, Leto izdelave: 2006, Chassis Diameter of coupling pin / fifth wheel: 2 inches Height of coupling pin / drawbar: 145 cm Structure Platform: ✓ Platform size: 880x250 cm Special transport Hydraulic ramps: ✓ Length over axles: 880 cm Dwjdeu H A R Ropfx Afqjb Length of loading surface: 880 cm Length of ramps: 255 cm Gooseneck length: 315 cm Lowbed: ✓ Maximum width: 300 cm Maximum length: 880 cm Extendable: ✓ Adjustable ramps: ✓ Tank Fuel: ✓ = Further information = Tyre size: 285/70 R19.5 Axle brand: Gigant Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Tyre tread left outer: 95%; Tyre tread right outer: 95% Axle 2: Twin tyres; Tyre tread left outer: 95%; Tyre tread right outer: 95% Axle 3: Twin tyres; Steered; Tyre tread left outer: 95%; Tyre tread right outer: 95% Gross vehicle weight (GVW): 16,777,215 kg Loading deck height: 95 cm = Company information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: rabljeno, številka stroja/vozila: WG0STZL5990030302, konfiguracija osi: > 3 osi, prva registracija: 01/2012, skupna dolžina: 12.900 mm, skupna širina: 2.550 mm, skupna višina: 3.650 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2012, Chassis Chassis height: 85 cm Fifth wheel pin diameter / fifth-wheel coupling: 3.5 inch Height of coupling pin / drawbar: 120 cm Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Load floor length: 890 cm Ramp length: 430 cm Gooseneck length: 370 cm Low loader: ✓ Maximum width: 315 cm (30+30 cm) Extendable: ✓ Telescopic: ✓ Tank Fuel: ✓ = Additional information = Axle configuration Tyre size: 245/70 R17.5 Axle brand: BPW Eco Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Lift axle; Tyre tread left outer: 50%; Tyre tread right outer: 30% Axle 2: Twin tyres; Steering axle; Tyre tread left outer: 40%; Tyre tread right outer: 75% Axle 3: Twin tyres; Steering axle; Tyre tread left outer: 35%; Tyre tread right outer: 80% Axle 4: Twin tyres; Steering axle; Tyre tread left outer: 40%; Tyre tread right outer: 70% Axle 5: Twin tyres; Steering axle; Tyre tread left outer: 45%; Tyre tread right outer: 45% Weights Unladen weight: 14,500 kg Payload: 65,500 kg Gross vehicle weight: 80,000 kg Functional Body brand: Goldhofer Dodpeu H Ec Aefx Afqjwb Loading platform height: 85 cm Identification Registration number: G3763047 = Company information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: novo, lastna masa: 11.400 kg, največja dovoljena obremenitev: 27.600 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, skupna dolžina: 13.620 mm, skupna širina: 2.550 mm, skupna višina: 900 mm, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 245/70 R 17.5, stanje pnevmatik: 100 odstotek, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, Oprema: ABS, NOVO, osi s kapaciteto 12 ton z bobenskimi zavorami, prva os je dvižna, tretja os je vodljiva, 13 pnevmatik 245/70 R 17,5, platforma s »gooseneck« priklopom, obložena s trdo leseno ploščo in valjano pločevino, različna pritrdilna očesca, okrogle luknje za opore, stranski podaljški z oznakami za izjemno obremenitev, 2 orodjarni omari, nosilec za opore z oporami, dvojne hidravlične rampe, hidravlično zložljive in razširljive, stranske ograje na »gooseneck« priklopnem delu, rampe za dostop na »gooseneck« priklopni del, električni vitel s kapaciteto 8 ton. Dwjdezx Udrjpfx Afqeb

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT23201013029, lastna masa: 7.340 kg, največja dovoljena obremenitev: 22.660 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, širina tovornega prostora: 2.540 mm, skupna dolžina: 14.500 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: rdeča, Leto izdelave: 2026, Pozor, arhivske slike! Dvopolna, nizkotlačna prikolica Tip SZS 300, specializirana za transport tovornih vozil #Podvozje nizkotlačne prikolice Jeklena, varjena konstrukcija, sedelna plošča z zamenljivo 2-palčno kraljevo glavo, nizka ploščad od področja koles do gosičnega vratu, nagnjena za približno 210 mm višine tovornega prostora, zadnji del do področja koles nagnjen, ležalna letva za aluminijaste rampe na zadnji strani, po celotni širini 2 klini za podložke z nosilcem Zaščita koles z pocinkano jekleno pločevino, odstranljiva 1 vlečna ušesa na zadnji strani, 10 ton Rezervno kolo z nosilcem na čelni steni/predal zunanji del spredaj 1 predal iz jekla na gosičnem vratu spredaj, prečno, približno: D = 2400 mm, Š = 400 mm, V = 600 mm, z zaklepanjem Električni vitel, 24 voltov, vlečna sila 8165 kg, nameščen spredaj na gosičnem vratu za predalom, na tovorno površino, upravljanje z radijskim daljinskim upravljalnikom, dolžina vrvi 35 m x približno 10 mm, z valjčno vodilno napravo in 2 odstranljivima vodilnima valjčkoma na gosičnem vratu in zadnji nagnjeni plošči, vključno z vtičnico NATO na priključni plošči 1 par jarkov za kolesa, približno 700 mm, začne se na gosičnem vratu, vgrajen v pod Opomba: Glavni okvir je približno 145 mm nad tlemi 4 pari vtičnih mest za opore za kolesa (Fliegl standard), brez opor za kolesa Dodatek za parkiranje prikolice, približno 100 mm visoka in približno 100 mm dolga 2 kosa opor za kolesa, vtična Priprava za dodatke jarka za kolesa #Opora za pritrditev tovora, nizkotlačna prikolica 2 para 2,5-tonske opore za pritrditev tovora na gosičnem vratu 7 parov opornih točk zgoraj in ob strani v zunanjem okvirju, vgrajenih, 10 ton na vsaki Djdpfx Aszy Hwyofqewb 4 pari 10-tonske opore za pritrditev tovora, vgrajene zgoraj v vzdolžnem nosilcu, glavni okvir 1 vijak za pritrditev tovora s 6,7 tone (JDT), zadaj na sredini, v predalu za rampe 1 zložljiva opora za pritrditev tovora, dodatno spredaj na nizki ploščadi, 10 ton #Osi + vzmetenje SAF- os z bobnovimi zavorami, vzmetenje na zračni blazini z ventilom za dvigovanje in spuščanje #Kolesa in pnevmatike 235 / 75 R 17,5" Jeklena platišča, dvojna konfiguracija, tovarniška srebrna barva #Zavorna sistem Dvodovodna zavorna napeljava na stisnjen zrak Zavora s pomnilnikom vzmetne sile 2 vtičnice, ki se ne morejo zamenjati, spredaj, brez povezovalnega kabla EBS, elektronski zavorni sistem z vtičnico EBS spredaj, brez povezovalnega kabla Pozor: Prikolico lahko vlečejo samo vlečna vozila, ki zagotavljajo delovanje ABS! #Elektrika 24 voltov, večkomorne luči z LED in uporom, stranska rumena LED osvetlitev, osvetlitev registrskih tablic z LED 2 beli/rdeči luči za bočno osvetlitev, zadaj z LED 2 x 7-polne in 1 x 15-polna vtičnica, ki se ne more zamenjati, spredaj, brez povezovalnega kabla 2 beli gabaritni luči spredaj z LED 1 LED rotacijska luč z nosilcem 1 dodatna LED delovna luč, zadaj 2 dodatni LED delovni luči, integrirani v gosični vrat, za osvetlitev tovornega prostora #Pod Gosični vrat z jekleno/profilirano jekleno površino Nizkotlačna površina, jeklena luknjasta pločevina, v področju jarkov za kolesa jeklena/profilirana jeklena površina in v področju blatnikov odstranljiva jeklena pločevina Zadnji nagnjeni del z jekleno luknjasto pločevino #Stranske stene Aluminij, 320 mm visoke, stransko na gosičnem vratu, vtične, približno 2500 mm dolge Zadnja stena iz aluminija, 320 mm visoka, na gosičnem vratu, vtična #Nakladalne rampe 1 par aluminijastih rampe, nosilnost največ 12.000 kg na par, dolžina približn

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 12.500 kg, največja dovoljena obremenitev: 29.500 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 11.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, barva: rdeča, Leto izdelave: 2022, Low-bed semi-trailer Kässbohrer LB2 TIEF-BETT / 16.5 m / Extendable semi-trailer / Steering axles / 2 units Year: 2022 Technical data: Gross weight: 42,000 kg Registered GVW: 38,000 kg Unladen weight: 12,500 kg Payload capacity: 29,500 kg 2 steering axles BWP axles Air suspension Disc brakes Remote control Detachable front Main deck length: 660 cm Extendable platform length: 460 cm Total main deck length: 1,120 cm Rear platform length: 270 cm Ride height: 40 cm Width with extensions: 255 cm Core width: 130 cm Dodpjzxfywjfx Afqewb Extended: 25 cm on each side Special permits: Vehicle width: 3.20 m Distance between kingpin and rear end of semi-trailer: 16.525 m GVM: 38,000 kg Permissible axle group load: 20,000 kg (1st axle – 10,000 kg; 2nd axle – 10,000 kg) The semi-trailer is in excellent technical and visual condition. Complete documentation available. 2 identical semi-trailers available.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.300 kg, največja dovoljena obremenitev: 22.700 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, barva: zlato, Leto izdelave: 2023, Polprikolnica za prevoz utekočinjenega plina BC-LGC NCG-50 / ADR / 2023 Dwedpfx Aszxfxyefqob Letnik 2023 ADR, razred II (plini) Tehnični podatki Bruto masa 34.000 kg Masa 11.300 kg Nosilnost 22.700 kg 1 prostor Prostornina 50 m3 Nakladanje od zgoraj Dimenzije: Dolžina 11,85 m Širina 250 cm Višina 355 cm 3 osi JOST Zračna vzmetitev Dvigni os litja platišč Tehnično in vizualno stanje je odlično.

Stanje: novo, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, Oprema: ABS, Chassis: - Sturdy welded steel frame construction with front frame cranking and flat loading platform, rear ramped section approx. 500x100 mm - Gooseneck 200 mm with beveled corners - Sloped gooseneck end approx. 500x100 mm (traction ribs on outer frame behind rear inclination) - 2 kingpin positions with replaceable 2" kingpin - Outer frame closed on the outside as perforated frame for lashing with tension belts (chains not permitted) - Reinforced frame design / point load at the center of gravity - Prepared for extendable load platform widenings - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle - 1 pair wheel recesses in front of axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair between 1st and 2nd axle, steel covers - Underrun protection = extended end plate - Drop-down supports at rear Ramps: - 2-piece drive-up ramps, custom design, with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting mechanism (only in connection with electrohydraulic unit) - Width approx. 800 mm - Wood topping - Incl. traction ribs on ramps - Can be secured for travel with tension belts - Operated by manual lever mounted rear right in direction of travel - Hydraulically laterally shiftable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24 t landing gears, operated from one side with load equalization Axles, Steering, and Tires: - BPW air suspension axles, each rated at 10 t axle load, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lower device, total stroke approx. 200 mm - 2nd drive position via ball valve +50 mm - 1st axle as lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on trailer - 3rd axle as friction steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-fitted offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Dwjdpowviwkjfx Afqeb Accessories: - Plug-in side walls and rear wall on gooseneck approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 wheel chocks - Long license plate holder in end plate - 1 detachable ECE sign at rear - 11 pairs ZK modules 10t on the sides: - 2x on the gooseneck - 9x on the load platform - Steel mudguards with clear pass - Extendable warning panels incl. 3 position lamps each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 plug-in holders for warning panels in stake pockets on loading surface - 6 pairs of lateral stake pockets for 100x50 mm stakes - 2 rows of crosswise stake pockets for 100x50 mm stakes on the gooseneck from outer frame towards main frame (1x before and 1x after kingpin positions) - 3 rows of crosswise stake pockets for 100x50 mm stakes on loading platform from outer frame towards main frame (1x in front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in load platform for container locks to receive 1x 20ft container - Rubber apron mounted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Nova grey

Stanje: novo, lastna masa: 8.500 kg, največja dovoljena obremenitev: 40.500 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Oprema: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and flat loading area with rear taper approx. 500x100 mm - Neck of frame 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in area behind rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outside as perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Prepared for extendable width extensions in the loading area - With excavator trough, depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers Dodpjwu Agijfx Afqjwb - (Covers with Körapur coating), depth approx. 400 mm and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended end plate - Drop-leg supports at rear Ramps: - 2 pieces, single-part aluminium loading ramps with spring lift system - Dimensions (L x W) approx. 2,500 mm x 600 mm - Can be locked in transport position with tie-down straps - Laterally adjustable by hand Floor: - 35 mm larch wood floor with aluminium omega-profiles Landing Gear: - Mechanical 24 t landing gears with single-sided operation and load compensation Axles, Steering, and Tyres: - BPW air suspension axles, 10 t axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift/lowering device with total travel approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency operation by push button on trailer - 3rd axle is friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Brake System: - Two-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot-blasting, chassis spray galvanising and priming - Chassis / wheel hub / outer frame painted in DB 7350 Novagrau - Plastic parts black, unpainted - Rims: factory silver - Reflective strips on sides and rear in yellow Accessories: - Removable side and rear walls approx. 400 mm high on gooseneck - Spare wheel bracket - Aluminium bump guard - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Long licence plate holder in end plate - 1 removable ECE board at rear - 11 pairs ZK modules 10 t at sides: - 2x on gooseneck - 9x on loading area - Without tow rings at rear - Extendable warning boards incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable to loading width 4,500 mm - 4 mounting holders for warning boards plug-in type in stake pockets on loading area - 6 pairs of stake pockets at sides for 100x50 mm plug-in stakes - 2 rows transversely on gooseneck for 100x50 mm plug-in stakes from outer frame to main frame (1x before and 1x after king pin positions) - 3 rows transversely on loading area for 100x50 mm plug-in stakes from outer frame to main frame (1x front section, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks, suitable for 1x 20ft container - Rubber apron fitted on underrun protection

Stanje: rabljeno, dolžina tovornega prostora: 190.000 mm, širina tovornega prostora: 30.000 mm, višina nakladalnega prostora: 8.150 mm, skupna širina: 30.000 mm, Leto izdelave: 2006, Oprema: ABS, Goldhofer STZ-H6-57/80A – teleskopski prikolica z nizko nosilnostjo za transport vagonov                                 Odobritev          Tehnično 1 Hitrost:     80 km/h                65 km/h Nosilnost sedla:                23.000 kg              26.000 kg Nosilnost zadnje osi:        10.000 kg              11.000 kg Skupna masa:     83.000 kg              92.000 kg Nosilnost:                  52.500 kg              61.500 kg Lastna masa: (brez dodatne opreme):          30.500 kg Gooseneck: Dolžina: 4.000 mm Širina: 2.480 mm Višina: 235 mm Višina sedla: 1.350 mm DLR spredaj: 1.420 mm DLR zadaj: 2.700 mm Kraljevičnični vijak: 3,5 palca Naklon: nagnjen za 10 stopinj Sprednji vogali: nagnjeni za 45 stopinj Talna obloga: smreka 50 mm Opore sedla: mehanske Dodpfx Aoyfvypofqswb Širina z nadgradnjami: 2.550 mm hidravlični gooseneck z zunanjimi nosilci, hidravlično dvigljiv in spuščljiv z mehanskimi oporniki in hidr. dvižnimi cilindri hidromehanski sistem prisiljene krmiljenja (dvo-krožni sistem krmiljenja) v nizki konstrukciji (višina 235 mm) z nastavljivimi vodilnimi elementi in krmilnimi cilindri THP. Nosilna plošča: Tip: platforma Dvig: ne Dolžina: 13.000 mm Širina: 3.000 mm Talna obloga: pločevina/smreka 50 mm Niše za kolesa: ne Razširitve: ne Raztegljiv: enostavno teleskopski Dolžina 1: 10.000 mm Višina nakladanja (obremenjena) Višina nakladanja 1: 815 mm Nosilna plošča, teleskopsko raztegljiva, izvedena kot zunanja in notranja cevasta konstrukcija, z 1.070 mm dolgim, fiksnim delom nosilne plošče spredaj. V fiksnem delu nosilne plošče vgrajena objemka s vijaki za pritrditev podaljškov za mostove za kotle, varjene tirnice, ki smo jih pritrili, pa služijo kot tirna pot v tirnih širinah 1.000 mm (razdalja med tirnicami 1.015 mm) in 1.435 mm (razdalja med tirnicami 1.450 mm). Zaklepanje stopnje razteza s cilindri s pomnilniško vzmetjo in stožčastimi pušami Višina nosilne plošče na srednji cevi okvirja (zunanje cevi) približno 815 mm (+/- 130 mm) Višina nosilne plošče na vgrajenih tirnih elementih približno 790 mm (+/- 130 mm) Podvozje zadaj: Obličje podvozja: standardno Višina nakladanja (obremenjena): 815 mm Širina: 3.000 mm Medosna razdalja: 1.360 mm Talna obloga: pločevina Razširitve: ne Niše za kolesa: ne Niša za bager: ne Osi: Število osi: 6 Dvižna os: glejte dodatno opremo Tip osi: krojena krmilna roka Izravnava osi: hidravlična Proizvajalec osi: BPW/Eco Načini vožnje: 1 Hod osi (1) +/-: 130/130 mm Hod osi (2) +/-: 0/0 mm Dvižni/spuščevalni ventil: Da 1. os pneumatsko dvižna z dvižno membrano Krmiljenje: Število krmilnih osi: 6 Razporeditev krmilnih osi: vse krmilijo Največji kot krmiljenja: 45° Vrsta krmiljenja: hidr. 2-krožni Pnevmatike: Dimenzije: 235/75 r 17,5 143/141 J Vrsta pnevmatike: dvojna Vrsta platišča: diskovna Centriranje platišča: sredinsko centrirano Koda zavor: po standardu EU: Da AGS: Da ALB: Da ABS: Da z ABS povezovalno spiralno cevjo: Ne Parkirna zavora: pomnilniška vzmet EBS: Ne ECAS: Ne Opomba: Izračun zavor št.: GH 4324S Opomba za podvozje: Krmiljenje zasnovano za raztegnjeno stanje z večjim kotom krmiljenja sprednjih osi odprte odprtine za kolesa nad kolesi z ozkimi stranskimi podaljški vmes (ALU pokrovi, glejte dodatno opremo) Upravljalni elementi zaščiteni na levi strani glede na smer vožnje...

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 13.000 kg, največja dovoljena obremenitev: 37.100 kg, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, prva registracija: 07/1995, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 450 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: modra, Leto izdelave: 1995, Oprema: ABS, extendable low-loader De Angelis, year 1995, payload up to 37 tons, 3 axles with air suspension, ABS, 2nd and 3rd axles steering, extendable chassis with a central extension of additional 3.50 m, closed well (culla) 5.0 m, height from ground 44 cm, removable cover above axles, manual rear ramps, good condition, DEALER: INTERDRIVE SRL – PARMA Dedswa T T Repfx Afqewb

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.800 kg, največja dovoljena obremenitev: 25.500 kg, skupna masa: 36.800 kg, konfiguracija osi: 3 osi, prva registracija: 10/1998, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 450 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: rdeča, Leto izdelave: 1998, Oprema: ABS, Bertoja extendable low loader, 3 axles with 2nd and 3rd self-steering axles, air suspension, ABS, year 1998, cradle length 5.30m with an additional 3.50m extension, ground clearance 45cm, removable module above the axles, adjustable detachable gooseneck, wired remote control for steering self-steering axles, good condition. DEALER: INTERDRIVE SRL - PARMA. Dwsdpfx Afjwg E Rbjqob

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 9.000 kg, največja dovoljena obremenitev: 29.000 kg, skupna masa: 38.000 kg, prva registracija: 08/2020, barva: rdeča, Leto izdelave: 2020, ES-GE 2-Axle Lowbed Trailer, non-telescopic, Tridec Steering Gross Vehicle Weight: 38,000 kg Axle Load (2 x 10,000 kg): 20,000 kg Fifth Wheel Load: 18,000 kg Unladen Weight +/- Manufacturer Tolerance: approx. 9,000 kg Payload: approx. 29,000 kg Total Length: approx. 13,650 mm Total Width: approx. 2,540 mm Loading Platform Length: approx. 13,200 mm Loading Platform Width: approx. 2,540 mm Front Overhang: approx. 1,200 mm Front Radius: approx. 1,750 mm Kingpin Swing Clearance: approx. 2,100 mm Fifth Wheel Height: approx. 1,150 mm B-Dimension: approx. 12,000 mm Raised Platform Length: approx. 3,700 mm Deck Height, Raised Platform: approx. 1,480 mm Lowbed Length: approx. 6,500 mm Deck Height, Lowbed: approx. 250 mm Ground Clearance, Lowbed: approx. 100 mm Deck Height over Axle Assembly: approx. 3,000 mm Tractor Unit Specification A-Dimension: approx. 4,500 mm Fifth Wheel Height: approx. 1,150 mm Kingpin Swing Clearance: approx. 2,100 mm Chassis: - Frame made from high-grade fine-grain steel - Lowbed in rigid design - Axle assembly not detachable - Without excavator boom recess King Pin - 2-inch kingpin Landing Gear - Without front landing legs Dwsdpfx Asu U Np Tofqeb Axles - 2 x 10,000 kg axles (17.5"), technically rated at 12,000 kg each - Manufacturer: Gigant - Enclosed drum brakes, asbestos-free brake linings - Automatic slack adjusters, central alignment - Axle spacing approx. 1,360 mm Suspension - Air suspension with raise and lower function - 2nd ride height for air suspension (+ approx. 30 mm) Steering - Hydraulic axle kingpin steering - All axles steered, brand "Tridec" Tyres - 9 x 245/70 R 17.5 tyres, load index 146/146 F - Manufacturer: Continental - Steel rims Brakes - Dual-circuit air brake system in accordance with EU directives, Manufacturer: "Knorr" - Automatic load-dependent braking force regulator - Standard air couplings red/yellow, per ISO 1726 - Electronic brake system, "EBS", 7-pin socket per ISO 7638, mounted on front in line with EU requirements. With ABS 4S/2M - With RSS (Roll Stability Support) - Parking brake via spring actuators - 4 wheel chocks with holders - Without flexible connection hoses (Wendeflex) to tractor unit - Air tanks made of aluminium - TIMG2 (Trailer Information Module) mounted for reading current axle loads Underrun Protection - Integrated into rear closure panel Side Frame - Side frame made from UNP steel approx. 200 mm Load Securing - 13 lashing points per side with 13,400 kg lashing capacity, foldable outward, mounted on outer frame - 1 pair of lashing rings with approx. 13,400 kg lashing force at the rear of the gooseneck, approx. 400 mm above ground - 1 pair of lashing rings with approx. 13,400 kg lashing force at the rear vertical end of the lowbed - 7 stake pockets per side on inner side of the outer frame for stakes approximately 80x50x4 mm, evenly distributed along the full length of the load platform - 6 stake pockets per side, welded on the exterior of the longitudinal beams Flooring - Approx. 28 mm hardwood floor with Omega profiles, fitted between the longitudinal beams - Checker plate (approx. 8/10 mm) over axle assembly Front Wall - Designed as a storage box with lid, approx. D 400 x H 450 mm, over the entire width of the loading platform, with chamfered corners Side Walls - 3 removable anodised side walls on the gooseneck, approx. 2,440 x 400 mm - Removable galvanised stanchions at the rear Galvanizing - All steel parts shot-blasted - Chassis spray-galvanized Paintwork - Primer and sin

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Load Area: - Extendable loading area with rear taper approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with square climbing strips 15 x 15 mm, including lower extensions - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel as well as protruding into the loading area for parking excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of lashing rings, installed flat at the front of the load area (LC 10,000 daN) - 5 pairs of folding lashing rings on the outside (LC 5,000 daN) - 2 pairs of folding lashing rings on the outside (LC 10,000 daN) - 2 pairs of lashing rings in the dipper stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the load area for securing straps (LC 2,000 daN) - Incl. three-part removable galvanized covers over the wheel recesses – max. point load 3.5 t / pc. Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surfacing - Ramp with hydraulically folding ramp sections, hydraulic lifting gear, and hydraulically adjustable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tool kit - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Mounts for warning signs left and right at the gooseneck and at the rear, each with socket - One spare wheel - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized front connector strip - 4 wheel chocks - Galvanized, extendable outriggers approx. 230 mm per side - Galvanized folding supports beneath the loading area bevel - Rear trailer bracket for rotating beacon - Cover plates for bridging the gap between ramps and load area - White reflective tape to EU regulations, sides and on extensions; rear in red - Electro-hydraulic unit installed at the rear beneath the loading area - Ramp control valves mounted on right trailer side - European reflective panels (red-yellow) on rear of trailer - Four extendable warning boards, approx. 423 x 423 mm, with position light - Bracket for rotating beacon on warning boards - Removable ALU side boards and rear board on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (structure length approx. 2,560 mm) - 2 pairs of WADER container pockets in loading area for 20ft or 30ft container - 3 pairs of socket pockets for stakes 100 x 50 mm in outer frame of loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame at loading bevelling - Painted sand layer on chequer plates of the gooseneck and loading area for anti-slip protection - 80 km/h speed stickers rear and both sides Dwsdpoup U Hzofx Afqeb - Load manometer for axle load measurement, including load chart.

Stanje: novo, lastna masa: 29.600 kg, največja dovoljena obremenitev: 72.400 kg, skupna masa: 102.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 6.650 mm, širina tovornega prostora: 2.840 mm, višina nakladalnega prostora: 550 mm, velikost pnevmatike: 285/70 R19.5, barva: siv, obratovalna teža: 29.600 kg, Oprema: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-axle front bogie: - Hook mountings at front and rear - Bogie length x width approx. 2,200 mm x 2,850 mm Excavator deck "BB-A": - Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and pin-lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance 4-axle rear bogie: - Mechanical pin-lug coupling for the installation of a lowbed at the front, rear crossmember at the back - Bogie length x width approx. 5,480 mm x 2,850 mm - Multiple lashing points Pendulum axles and tyres (front and rear bogies): - "PENDULUM AXLE", all axles forced-steered via hydromechanics - Hose rupture valve on axle compensation cylinders with automatic RESET function - Hydraulic cylinders with shut-off valves and locking clips for securing in raised position - Final coating on axles: 2 layers of single-colour MB 7350 Novagrau 2K paint - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres size 285/70 R19.5 Remote steering (after-steering): - Remote steering operable from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles - Socket for remote steering control on gooseneck - Cable remote control with pushbuttons and single-track control included Accessories included: - Yellow and red air couplings on the galvanised front connection bar - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at rear of gooseneck for warning boards - Hoisting jib with winch for spare wheel at the front face of the gooseneck - Truck hydraulic connection with flow control (40 l/min), including support jib for supply lines; tractor unit tank must have at least 80 litres capacity with couplings - Plug-in ALU side and rear boards on gooseneck, approx. 400 mm high, anodised - Control lever on gooseneck protected by foldable cover - Separate air connection with air gun on gooseneck - BEKAMAX central lubrication system: 1x on gooseneck, 1x on 2-axle and 1x on 4-axle bogie - Variomax tool kit - Multi-coupling hydraulic connectors on gooseneck and at lowbed hook interface - 2 spare wheels - One 7-pin socket left and right, at front and rear of rear bogie for warning boards - Front bogie with separate air connection for impact wrench - Foldable steel bed extensions, adjustable in width from approx. 2,850 mm to 3,250 mm - Steel bed inserts can be placed in 2 positions for sunken load area - Steel mats with rubber flooring, approx. 12 mm thick - Thread-in options (⌀ 40 mm) every approx. 500 mm on the upper flange of the excavator deck outer tube for eye bolts - One locking point at every approx. 500 mm on extension with mechanical lock - Socket on rear bogie for remote steering cable control Dodpfx Ajwcmhajfqowb - 2 reversing lights on rear panel - Four extendable warning boards (by approx. 2,000 mm), each approx. 423 x 423 mm with position lights - 1 work light left + right on rear panel of gooseneck with separate on/off switches - Two INOX toolboxes, approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Radio remote control for after-steering

Stanje: novo, lastna masa: 10.900 kg, največja dovoljena obremenitev: 37.100 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear bevel approx. 1,000 mm x 6° - Technical king pin load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading platform: - Loading platform, approx. 9,600 mm long with rear taper approx. 900 mm x 6° - Platform area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, with a load capacity of up to approx. 9,000 kg - Grating surface and steel sheet floor approx. 5 mm thick as additional reinforcement on the sloped section of the platform Ramps: - One pair of two-section AXS steel ramps, approx. 4,675 mm long and approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward - Painted sand coating on the outer frame and ramp tips - Flashing lights on the outer sides of the ramp tips with control switch next to the ramp operation panel - Ramp lock in transport position with quick-release fastener Axles, suspension and tires: - BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steerable (trailing) - 1st axle with traction assistance - Operated via brake pedal in the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 - TPMS tire pressure sensors installed on all wheels including spare wheels Brake system: - WABCO EBS-E braking system in accordance with EU regulations Paintwork: - Trailer MB 7350 Novagrau Equipment included: - Removable front steel wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations, except for hydraulic winches - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide Dwodpjuadk Njfx Afqob - JOST Module B – static test load = 50,000 kg - Continuous grating with 5 mm steel underlay as additional reinforcement - Painted sand coating - Cutouts in the outer frame of loading platform and lift bed for hooking hydraulic ramp control valves on the right-hand side of the vehicle - 2" king pin - Central lubrication system with 1 pump, brand BEKAMAX - 1 pair of plug-in ALU side boards on the gooseneck, approx. 400 mm high, anodised - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Steel wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, lastna masa: 34.500 kg, največja dovoljena obremenitev: 106.700 kg, skupna masa: 141.200 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 7.150 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 580 mm, velikost pnevmatike: 285/70 R19.5, barva: siv, obratovalna teža: 34.500 kg, Oprema: ABS, Gooseneck: - Gooseneck hydraulically lift/lowerable as well as detachable - Length approx. 3,650 mm - Extensive lashing positions - For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie: - Hook mounts at front and rear - Chassis length x chassis width approx. 3,560 mm x 2,850 mm - Extensive lashing positions Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and bolted lug coupling at the rear - Length x base width approx. 7,150 mm x 2,850 mm - Beam height x beam width approx. 430 mm x 1,350 mm - Loading height 580 mm with 150 mm ground clearance Dwjdpfxjwhywfo Afqeb - 5 pairs of hanging lashing rings (LC 10,600 daN) - 4 pairs of threaded blocks M30 on inner beam for mounting screw-on rings 5-Axle Rear Bogie: - Mechanical bolt-on lug coupling for fitting a lowbed front, rear end traverse - Chassis length x chassis width approx. 6,840 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear bogie): - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-plugs for securing in lifted position - Final paint of axles with 2 coats of 2K paint, single-colour in MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tyres 285/70 R19.5 Steering Override: - Remote steering from the front and rear via cable remote control with push buttons, including axle tracking control - Socket for steering control operation on the gooseneck - Cable remote control with push buttons including axle tracking control Included accessories: - Yellow-red air couplings on galvanised front connection rail - Steel headboard approx. 400 mm high - 4 wheel chocks with holders - 2 spare wheels 285/70 R19.5 - 3.5" kingpin - Gantry with winch for spare wheel at the front side of the gooseneck - Truck hydraulic connection with flow control valve (40 l/min), including gantry for suspension of supply lines, tractor unit tank must be at least 80 litres with couplings - White reflective tape according to EU regulations on sides and extension, red at rear - Plug-in ALU side panels and rear wall on gooseneck, approx. 400 mm high, anodised - Operating lever on gooseneck protected by folding cover - Separate air connection with air pistol on gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2: 1x on the gooseneck, 1x on 3-axle bogie, 1x on 5-axle bogie - Variomax tool kit - Multi-coupling hydraulic connections in the lowbed hook area - Front bogie with separate air connection for air screwdriver - Threaded inserts (ø 40 mm) every approx. 500 mm on outside of upper flange of excavator deck for screw rings - Folding extensions with steel mats, width adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel mats with rubber covering approx. 12 mm thick - Two INOX toolboxes 855 x 340 x 390 mm - Radio remote control for steering override in addition to cable remote - Painted sand layer as anti-slip measure - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Stanje: novo, največja dovoljena obremenitev: 38.100 kg, skupna masa: 50.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 13.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5 3PMSF, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of fold-out lashing rings 3 pairs of fold-out lashing rings 1 pair of horizontal lashing rings at the front of the loading area Cut-outs in the outer frame of the loading surface for hooking in tension belts Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing legs: JOST landing legs with 2-speed gears for a 24 t lifting capacity Axles and tyres: BPW axles, two axles are fixed, two axles are self-steering, air-suspended, with drum brakes, with lift/lower function The self-steering axles come with an electro-magnetic reverse lock, which is activated via reverse gear or manually Djdpfx Afjtphtmeqjwb Axle toolkit Tyres: 205/65 R17.5 3PMSF Brake system: WABCO brake system according to EU regulations with EBS-E Steel construction: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK lighting ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component zinc dust primer High-quality single-colour 2-component top coat in MB 7350 Novagrau No metallic paint possible Rear section metallized and painted in RAL 9010 Accessories included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system acc. to ECE R 141 At the galvanized front connection strip yellow-red air couplings 4 wheel chocks with holder on front wall Bracket at rear of gooseneck for ALU access ramps Galvanized folding supports under the chamfer of the loading surface Mount for a revolving beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tension mechanism for the sliding curtains Height-adjustable by approx. 400 mm "EDSCHA" brand roof, sliding forward on ALU roof beam profiles, bolted to the front and rear wall In the loading surface, 3 pairs of sliding stakes Superstructure at rear hydraulically extendable to left and right by approx. 750 mm Sliding roof with upward swinging portal carrier Sliding tarp with 700 mm reserve length, with tension straps at intervals of approx. 600 mm Height to top edge of superstructure approx. 3,960 mm Journeys with the sliding roof open are not permitted and will damage the tarp Mounting rail for ALU access ramps at the rear of the vehicle At the gooseneck and at the rear panel left and right, each with a mount for warning signs incl. socket A mud flap at the rear of the trailer European reflector plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading area Lifting axle on the front axle controlled by TEBS E depending on current axle load and load status Rear structure with closed ALU double-wing doors A sanded, anti-slip paint layer on the checker plates on the gooseneck and on the loading surface BEKAMAX centralized lubrication system with standard grease NLGI-2 and a removable guard around the pump Speed stickers 80 km/h on rear and both sides Load manometer for axle load determination including load chart

Stanje: novo, lastna masa: 15.450 kg, največja dovoljena obremenitev: 65.550 kg, skupna masa: 80.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 21.900 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 925 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimized platform length, approx. 3,700 mm long, with rear tapering of approx. 1,000 mm x 10° Technical fifth wheel load: 30,000 kg. For tractors: 4x2, 6x2, and 6x4 Loading Platform: Double-extendable loading platform, approx. 8,800 mm long with rear taper of approx. 500 mm x 10°. A support table approx. 300 mm wide is welded to the central beam, featuring elongated slots at the front and rear for optional bridge elements that can be hooked in and repositioned Pneumatic locking with conical locking pin and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles and Tyres: BPW axles and suspension, first axle self-steering, all other axles hydraulically and mechanically forced-steered Dwodpfx Afsrigw Roqob First axle equipped with an electro-magnetic reverse lockout, activated via reverse gear and manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve Manufacturer by our choice Sockets and Lighting: 24-volt lighting system in accordance with EU regulations ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Complete HRM metallizing Full steel construction, shot-blasted, then hot-finished with ZINACOR 850 Paintwork: 6-stage finishing process: Complete steel construction shot-blasted after welding 1 coat of zinc-based primer, 1 coat of adhesion primer. Final paintwork in 2 coats of 2K paint in single-tone DB 7350 Novagrau, followed by cavity sealing with special wax Accessories: Detachable front wall made of steel, approx. 400 mm high Connection strip for supply lines to the tractor unit, fitted at the height of the outer frame profile ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. If your pin configuration deviates from the ISO connector standard, please inform us 3 kW electro-hydraulic power unit for hydraulic functions (excluding hydraulic winches) 1 pair of plug-in ALU sidewalls on the gooseneck, approx. 400 mm high, anodized finish 3.5'' king pin. Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide 2 wheel chocks with holder in front of the front wall Mechanical landing legs with 2-speed gearbox and crank Control valves for hydraulic ramps located on the right side of the vehicle 1 pair of mechanical rear supports Central lubrication system with 1 pump, BEKAMAX brand, using standard grease according to NLGI-2 Removable guard covering the pump(s) of the central lubrication system Remote steering from front and rear, controlled by cable remote with push buttons, with axle tracking control, no installation required on tractor unit Under the gooseneck and on the rear crossmember, one 7-pin socket with holder for warning signs each on left and right. One 7-pin socket on the rear crossmember Manual and documentation One-piece INOX stowage box, approx. 2,480 x 340 x 390 mm, straight design Please note that any special equipment and accessories will increase the unladen weight and correspondingly reduce the payload Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and brackets for beacon.

Stanje: novo, lastna masa: 12.800 kg, največja dovoljena obremenitev: 36.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 12.800 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimised loading platform length, approx. 3,750 mm in length - Gooseneck can be raised/lowered hydraulically and is detachable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading platform: - Low-bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear running gear: - Rear running gear with closed outer frame featuring checker plate cover and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear Axles, suspension and tyres: - “PENDLE-AXLE”, all axles force-steered hydro-mechanically - Hose rupture valves on axle equalising cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position - Final coat for axles with two layers of 2K acrylic paint, single-colour in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 245/70 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 14 - TPMS sensors installed in all wheels, incl. spare wheels Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3 kW electro-hydraulic unit for hydraulic operations, except for hydraulic winches - One spare wheel with mounting adapter - External beams of the gooseneck with mounting holes for bolt-on lashing rings - Plug-in ALU side walls on the gooseneck, approx. 400 mm high, anodised - One plug-in ALU rear wall on the gooseneck, approx. 400 mm high, anodised - Checker plate covering on the gooseneck - Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area lighting at the gooseneck with on/off switch - Hydraulic traverse to support the gooseneck on the tractor or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - The rear upper area of the gooseneck is closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and retaining bolts for bridging the low-bed mounting hooks - The ramps can be placed over or between the hooks - Mounting option for steel drive-on ramps at the rear between the external beams of the gooseneck - Prepared for bolt-on container locks for 1 x 20ft on the external beams - Mechanical pin and lug coupling from low-bed to running gear for exchanging the loading platform or inserting extension beams - With electro-pneumatic-hydraulic couplings Dedpfx Aevy Edcsfqowb - The outer beams of the low-bed are coated with painted-on sand layer as anti-slip protection - Removable (galvanised) load floor, can be inserted in 3 elements between the external beams, with hardwood surface - Foldable extensions, approx. 230 mm per side - Hanging strip at the front of the rear running gear to the low-bed for loose approach ramps - 2 pairs of stake pockets recessed into the outer frame of the running gear, for plug-in stakes approx. 100 x 50 mm - Hanging strip for loose ALU approach ramps at the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 extendable warning signs, approx. 423 mm x 423 mm - Numerous lashing positions

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 39.400 kg, skupna masa: 50.960 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, obratovalna teža: 10.600 kg, Oprema: ABS, Gooseneck: - Gooseneck with 30 mm hardwood flooring - Gooseneck at rear in straight version - 3 pairs of lashing rings (LC 5,000 daN) Extendable load floor: - Load floor in extendable configuration - 5 pairs of lashing rings foldable outward - 3 pairs of lashing rings foldable outward - 1 pair of lashing rings laying at the front end of the load floor - Cut-outs in the outer frame of the load floor for attaching tension straps - Approx. 48 mm hardwood flooring, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid axles, two self-steering axles - Air suspension with drum brakes, with lift/lower function - The self-steering axles are equipped with an electromagnetically operated reverse lock, which can be activated via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel construction made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, lighting 24 Volt, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: Dsdpfx Aet Ag Uwjfqewb - High-quality and durable corrosion protection on the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-colour 2-component (2K) top coat in Novagrau - Rear section metallised and painted in RAL 9010 (Pure White) Included accessories: - One spare wheel with holder in front of the bulkhead - 2" king pin - Galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised connection bar at the front - 4 wheel chocks with holder at the front wall - Galvanised folding supports under the load floor slope - Holder for a warning beacon at the rear of the trailer - Galvanised extensions, extendable by approx. 230 mm per side - White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - European reflective markings (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in ALU side walls and rear wall, approx. 2,440 x 400 mm - The rear, galvanised plug-in side stanchions are removable, length of the body approx. 2,560 mm - 7 pairs of WADER container pockets - 1x 20ft container on the load floor; 1x 40ft container on the load floor; 1x 40ft container above the gooseneck; 2x 20ft container - 7 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm in the outer frame of the load floor - Lift axle on the front axle with control via TEBS E, depending on the current axle load and load condition - Sliding plug-in rail for ALU loading ramps at the rear of the vehicle - Anti-slip sand finish painted on the checker plates on the gooseneck and load floor - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, each with a position lamp - Holder for warning beacon on the warning boards - 80 km/h speed stickers at the rear and on both sides - Axle load gauge for determination of axle loads inclu

Stanje: novo, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 3PMSF, barva: siv, Oprema: ABS, Swan neck: - Swan neck with front corners beveled at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° Dwedpfxouqlmns Afqeb - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the load area (LC 10,000 daN) - Cut-outs in the external frame of the load area for attaching lashing straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, over the axles with checker plate covering Axles and Tires: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear or manually - Air suspension with lifting and lowering valve - Axle tools - 235/75 R 17.5 tires, 3PMSF Braking system: - WABCO braking system as per EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Accessories included: - One spare wheel with holder in front of the front wall - 2'' king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holder at the front wall - Rear light bracket at the rear of the trailer - Mounting points at the rear area of the swan neck for ALU loading ramps - Galvanized folding supports under the chamfer of the load area - Cover plates to bridge the gap between ramps and load area - White reflective tape according to EU standards on the sides, red at the extension and rear - Electro-hydraulic unit at the rear, under the load area - Bracket for warning panels left and right on the swan neck and ramps, including power socket - Ramp control valves mounted on the right-hand side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the swan neck aluminum side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - 3 pairs of WADER container pockets in the load area for a 20ft, 30ft, or 40ft container - 6 pairs of stake pockets 100x50 mm in the external frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfered area of the load area - Anti-slip sand layer painted on the checker plate above the king pin and load area - Mounting for beacon on the warning panels - European reflective plates (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load chart - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel construction shot-blasted, then the defined visible surfaces finished hot-metallized with ZINACOR 850 (zinc 85% - aluminum 15%)