Fliegl Vts 400 Sonder nakup rabljenega (5.721)

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT44001000966, lastna masa: 9.400 kg, največja dovoljena obremenitev: 30.600 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2010, skupna dolžina: 12.120 mm, skupna širina: 27.500 mm, skupna višina: 900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", barva: rdeča, Leto izdelave: 2010, These images are for reference only! Gross weight perm. / technical: 24,000 / 40,000 kg Payload perm. / technical approx.: 14,600 / 30,600 kg Axle load perm. / technical: 24,000 / 40,000 kg Unladen weight (base version) approx.: 9,400 kg +/- build tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low loader platform length in driving lane area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loading height in the low bed (loaded) approx.: 900 mm Tow height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis Low Loader Trailer Hnedpfx Aoyxq A Hsg Ijl Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium 1 plastic toolbox Extendable widenings to 3,250 mm (not at rear bevel) (tracking width of transported construction machines or vehicles must not exceed outer frame width of 2,750 mm) Central storage compartment for wooden planks 70 mm wooden planks for widening to 3,000 mm 2 pairs of stake pockets in the low bed, integrated in the floor longitudinal beams Lashing rings, low loader: 2 pairs of lashing rings on the neck, each 5 t 1 pair of lashing rings in the rear bevel 4 recessed lashing rings, placed centrally in the floor 2 pairs of key slot profiles in the driving lane, for longitudinal guide rails and as additional lashing points 6 pairs of lashing mushroom anchors in the low bed outer frame, each 10 t 5 pairs of stake pockets in the outer frame of the low bed 4 additional pairs of 10 t lashing rings: 1 on the neck 3 recessed in the floor of the low bed Drawbar coupling, turntable trailer: Drawbar with tested 50 mm towing eye Axles + suspension: Drum brake axles Parabolic spring suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization front and rear (rocker leveling) Wheels and tires: 235 / 75 R 17.5" Steel rims, twin arrangement, factory silver Brake system: 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connection lines for towing vehicle ABS and ALB, with ABS connector at front, with connection cable Attention: The towed trailer may only be pulled by towing vehicles that ensure proper function of the ABS! Floor: Neck area with steel/chequer plate flooring then 70 mm softwood floor, wheel recesses with steel/chequer plate flooring Rear bevel with 70 mm softwood floor Access ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surface Hydraulically operated via tractor PTO Operating instructions: For 10,000 kg axle load, a special permit is required, only indivisible loads permitted!!! Note! Overlength and excess width, special permanent approval required. For applications for special permits for heavy-duty transport, an axle load display is required for air-suspended vehicles! This applies to all deviations from § 34 StVZO (axle load and permissible gross weight exceedance) that require a special permit under § 70 StVZO. The declared gross weight is technically feasible; depending on the load, the gross vehicle weight may not be achievable while observing permissible axle, support, and saddle loads. (Poor driving and trailing behavior possible due to incorrect load distribution) These images are for reference only!

Stanje: novo, številka stroja/vozila: ee3256d63dd23b3ad1bdf9ab0, lastna masa: 10.280 kg, največja dovoljena obremenitev: 13.720 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with robust ball bearing slewing ring Foldable rear support legs 2 wheel chocks with holders Aluminum side underrun protection Full-width rear mud flaps Quarter shell fenders in front of the 1st axle Excavator arm trough above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes rated at 5 t each in the excavator arm trough, positioned laterally on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear taper 1 storage box recessed into the gooseneck on the floor with lid, W=720 mm/ L=520 mm / D=170 mm 1st pair of wheel recesses after the gooseneck, recessed in the low-bed deck area, sloped for entry, length at bottom approx. 1600 mm, approx. 400 mm deep. Note! Main frame section 400 mm higher than wheel recess. 2nd pair of wheel recesses between the axles, recessed in the low-bed deck area, sloped for entry, length at bottom approx. 600 mm, approx. 300 mm deep. Note! Main frame section 300 mm higher than wheel recess. Removable wheel recess covers from the main frame, with wooden inserts. Distance from main frame longitudinal member to outside member approx. 1280 mm (wheel recess area) Extensions extendable to 3,000 mm, foldable at the wheel recess extensions (extensions not in the rear taper nor at the bottom of the wheel recesses) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for timber planks centrally on load area or underneath depending on technical feasibility 70 mm timber planks for extension to 3,000 mm Low-bed lashing points 1 pair of ring lashing points recessed in the gooseneck, each rated at 5 t 8 pairs of lashing mushrooms recessed in the top and side outer frame, each rated at 10 t 2 x at the front on the gooseneck 6 x in the low-bed – first lashing point 250 mm from the front, last maximum 250 mm from the rear, distance between lashing points not greater than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each rated at 5 t (can be converted to stake pockets) Drawbar Assembly for Turntable Trailer Drawbar with tested 50 mm towing eye, towing eye inclined at 8° Axles + Suspension SAF drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption Air suspension with lift & lower valve, separately operable at front and rear Wheels and Tires 235 / 75 R 17.5 Hodsi Ri I Nepfx Ag Isnl Manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake Trailer info center, displays vehicle data (e.g., axle load—not a calibrated scale) and odometer Axle load detection via EBS-Canbus signal, for display in the cab (truck must be pre-equipped, not installed in truck, not a calibrated scale) Vehicle Stability System Duomatic coupling at the front with connecting line to the truck tractor EBS, electronic braking system with EBS socket at the front, with connecting cable Note: The trailer may only be towed by vehicles that ensure proper ABS function! Electrics 24 volts, multi-chamber LED lights with resistor, side marker yellow LED lights, LED license plate lights (Note: Certain towing vehicles may show diagnostic errors despite systems working correctly) 2 white front position lights in LED 2 white/red lane marker lights at the rear in LED Additional LED w

Stanje: novo, številka stroja/vozila: 408ba9a39bbb8087056d6e563, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium Full-width rear mudflap Half-shell fenders on 1st and 2nd axle with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind 3rd and 4th axle Excavator arm recess over the rear axles, starting to the rear, approx. 1800 mm long, approx. 650 mm wide, and approx. 150 mm deep, 2 pairs of lashing holes each rated 5 t located laterally in the excavator arm recess in the main chassis, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock (Padlock not included) 1 storage box let into the gooseneck in the floor with lid, w=720 mm/ l=520 mm / d=170 mm Extendable width to 3,000 mm (not at the rear bevel) (the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) 70 mm timber planks for widening to 3,000 mm Storage compartment for timber planks under the loading platform Lashing rings low-loader (40 lashing possibilities) 1 pair of lashing rings on gooseneck, each 5 t 9 pairs of lashing mushrooms recessed into the outer frame, top and side, each rated 10 t 2 x in the front on the gooseneck 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each rated 5 t (for lashing strap hooks) 3 additional pairs of folding lashing rings, each rated 10 t 1 x inside beside the main frame at the beginning of the low-bed 1 x on the gooseneck (protruding) 1 x recessed into the floor behind the last axle Drawbar coupling for turntable trailer Hnodpfx Agoi Ri Daj Iol Drawbar with certified 50 mm towing eye, towing eye inclined at 8°, D-value at least 160 kN Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 manufacturer’s choice Steel rims, twin mounting, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, including connection lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 volt, multi-chamber lamps, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with holder, operated via parking light (beacon removable) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Flooring Gooseneck at front with steel/chequer plate floor Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber decked Hydraulically operated via tractor PTO with restrictor, control located on the left side at the front Hydraulic connection with SVK connector NW 10/3, incl. connecting hose Registration Country/Plates Registration country: Germany 24/7 Service Hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, side white and rear red Warning plate according to ECE – 70 Paintwork Chassis hot-dip galvanized including passivation, 15-year warranty again

Stanje: novo, številka stroja/vozila: 55d3c5c03e032385649769b1b, lastna masa: 9.900 kg, največja dovoljena obremenitev: 14.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with heavy-duty slewing ring, integrated storage box incl. Turntable front structure Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width rear mud flaps Extendable widenings to 3,000 mm (not at rear taper) (track width of the machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central compartment on loading area for timber planks 70 mm timber planks for widening to 3,000 mm Lashing points Low-loader 3 pairs of integrated lashing points, each rated to 10 t, at the front floor 6 pairs of mushroom lashing points, top and side integrated in outer frame, each 10 t 1 x at neck area remaining points distributed, distance no greater than 1,200 mm 1 x at rear taper 5 pairs of stake pockets integrated in the outer frame, internal size 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly for trailer turntable Drawbar with certified 40 mm towing eye Note: For 40 mm towing eye, the maximum permissible gross weight of the towing vehicle is 18,000 kg. Otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Laser-aligned axles/chassis to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization front and rear (rocker compensation) Wheels and Tires 235 / 75 R 17.5 manufacturer's choice Steel twin wheels, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the truck ABS and ALB, with ABS connector at front, connection cable included Attention: The trailer may only be towed by vehicles that ensure ABS functionality! Electrics 24-volt multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red rear lane marker lights 2 x 7-pin non-interchangeable connectors at the front, with connection cable 1 LED beacon with bracket, operated via parking lights (removable beacon) 2 pairs of warning boards, double LED-lit and extendable to 3,000 mm Floor Steel floor at front section thereafter 70 mm softwood floor, in wheel arch area with steel/chequer plate covering Rear taper with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable wooden inlays spring-assisted lifting Operating instructions Exception permit required for 10,000 kg axle load, only indivisible loads allowed!!! Hnodpfji Ri I Ejx Ag Iel The specified total weight is technically possible. Depending on the cargo, the full gross weight may not be achieved while observing permissible axle/pin/support loads (poor tracking and handling may result from incorrect load distribution) Country of Registration / Plates Registration country: Germany 1 with Dekra inspection and report (according to §13 EC-FGV) 24/7 service hotline prepared for 2-line license plate holder Conspicuity markings with reflective strips acc. ECE R 048, white on the sides, red at the rear Paint Frame RAL 3002 Carmine Red 10 years warranty against rust-through Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Attention: Archive photos!

Stanje: novo, številka stroja/vozila: f79a9f15e7131d57a512793ab, lastna masa: 8.900 kg, največja dovoljena obremenitev: 15.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball race Foldable rear supports 2 wheel chocks with holders Side underrun protection, aluminium Rear spray guards across the full width Quarter fender before 1st axle Extendable outriggers up to 3,000 mm (not in the rear slope area) (Note: The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central storage compartment for timber planks on the loading area 70 mm timber planks for extension to 3,000 mm Lashing points Low-bed 1 pair of lashing rings on gooseneck, each rated at 5 t 9 pairs of lashing mushrooms, flush-mounted on the top and side in the outer frame, each rated at 10 t 2 x front on gooseneck 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each rated at 5 t (for attaching tie-down straps) Drawbar System Turntable trailer Drawbar with certified 50 mm towing eye Axles & Suspension SAF drum brake axles Laser-aligned axles/chassis to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mount and mechanical axle load compensation (rocker balance) front and rear Wheels and Tyres 235/75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake System 2-line air brake system Spring-loaded parking brake 2 swap-proof coupling heads at the front with connection lines to towing vehicle ABS and ALS, with ABS connector at the front and connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, side amber LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 LED beacon with holder, switchable by parking light (removable) 2 pairs of warning boards, double LED illuminated and extendable up to 3,000 mm 2 x 7-pin swap-proof plugs at the front, with connecting cable Floor Gooseneck at front with steel/chequer plate covering Thereafter 70 mm softwood floor, wheel arch area with steel/chequer plate covering Rear slope with 70 mm softwood floor Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood plated Hnodpfxji Ri Izs Ag Iol Hydraulic activation via auxiliary drive on tractor unit with throttle, operation on front left side Hydraulic connection with SVK connector NW 10/3, including connection hose Operating Instructions A special permit is required for an axle load of 10,000 kg; only indivisible loads possible!!! The specified gross weight is technically possible; depending on the freight, the permissible gross weight may not be achieved while respecting axle, support and kingpin loads. (Poor driving and trailing behaviour possible due to incorrect load distribution) Registration Country / Plates Country of registration: Germany With Dekra inspection and report (according to §13 EC-FGV) 24/7 Service Hotline Included Prepared for double-line number plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Paintwork Frame DB 7350 Nova Grey 10-year warranty against rust-through Drawbar galvanised or black, at manufacturer’s choice Access ramps hot-dip galvanised

Stanje: novo, največja dovoljena obremenitev: 30.010 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with wheel recesses and split ramps, type VTS 400 RM Lease-purchase offer: Term 48 months, down payment only the VAT, residual value 40% Monthly rate: EUR 899.00 Vehicle / Body: Low-loader First registration: New vehicle Gross weight: 24,000 kg / 40,000 kg Unladen weight: 9,990 kg Payload: 14,010 kg / 30,010 kg Overall length: 12,000 mm Loading length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, load area including rear bevel approx. 7,150 mm Width: 2,550 mm Loading height: 900 mm Further information Low-loader trailer chassis Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports Wheel chocks with holders Aluminum side underrun protection Rear spray flap across the entire width Half-shell mudguards on 1st and 2nd axle with anti-spray flaps behind each axle, anti-spray flap behind 4th axle Excavator arm recess above the rear axles, extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, and approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator arm recess, lateral on the main frame approx. 300 mm from the front and approx. 200 mm before the rear bevel Spare wheel carrier for 1 spare wheel, upright on the gooseneck right at the front. Spare wheel, make identical to the main tires, steel rim Storage box recessed in the gooseneck floor with lid; dimensions W = 720 mm / L = 520 mm / D = 170 mm 1st pair of wheel recesses after the gooseneck, recessed in the low-bed lane area, ramped for entry, bottom length approx. 1,600 mm, depth approx. 400 mm. Note: Frame in the main beam area is 400 mm higher than the wheel recess 2nd pair of wheel recesses between the axles, recessed in the low-bed lane area, ramped for entry, bottom length approx. 600 mm, depth approx. 300 mm. Note: Frame in the main beam area is 300 mm higher than the wheel recess Extendable width up to 3,000 mm (not extendable in the rear bevel and not in the lower wheel recesses) (track width of the construction equipment or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks below the low-bed area 70 mm wooden planks for extension to 3,000 mm Lashing eyes on the low-loader 1 pair of lashing eyes, recessed in the front of the gooseneck, 5 t each 4 pairs of lashing holes in the outer frame, 5 t each (for lashing straps) Hsdpfx Astrizkog Isnl 8 pairs of lashing rings, integrated on top and side of outer frame, 10 t each 2 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets integrated in the outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 1 pair of folding lashing eyes, additionally recessed in the floor, 10 t each 1 inside next to the main frame at the start of the low bed 2 pairs of additional folding lashing eyes, 10 t each 1 on the gooseneck (protrudes over edge) 1 behind last axle, recessed in floor Drawbar coupling / turntable trailer hitch Towing bar with certified 50 mm towing eye, towing eye inclined 8° D-value at least 160 kN Axles & suspension BPW drum brake axles "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical front axle load equalization (rocker balance) Wheels and tires 235 / 75 R 17.5" Manufacturer's choi

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with ramps, model VTS 400 Gross weight: 24,000 kg / 40,000 kg Hnjdpfx Agoxrx Nls Isl Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm; neck approx. 2,490 mm; loading bed incl. rear taper approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Further information: Plus pre-freight / preparation ex stock 26639 Wiesmoor: €1,280.00 / net Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear mud flap Half-shell mudguards, 1st and 2nd axles with anti-spray flaps behind each axle, Anti-spray flaps in front of and behind 3rd and 4th axles Excavator stick trough over rear axles to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing holes, each 5 t, in the excavator stick trough on the longitudinal frame, approx. 300 mm from the front and 200 mm in front of the rear slope 1 plastic toolbox, w=600 mm / h=425 mm / d=460 mm, lockable Storage box recessed in the neck floor with lid, w=720 mm / l=520 mm / d=170 mm Extendable outriggers to 3,000 mm (not for rear slope) (Track width of construction machinery/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for wooden planks under the low-bed deck Wooden planks, 70 mm, for extension to 3,000 mm Lashing points, low-loader: 1 pair of lashing cutouts in the front longitudinal beams, embedded in the neck, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching ratchet straps) 9 pairs of lashing mushrooms, embedded in and above the outer frame, each 10 t: - 2 × on the neck - 7 × in the low-bed section First lashing point 250 mm from the front, last max. 250 mm from the rear; lashing point spacing max. 1,100 mm Additionally, 3 pairs of folding lashing eyes, each 10 t: - 1 × on the neck (protruding) - 1 × at the start of the low-bed inside the longitudinal beams - 1 × in the floor behind the last axle Drawgear, turntable trailer: Drawbar with certified 50 mm eye Drawbar height adjustment via spring Axles & Suspension: Drum brake axles, per manufacturer’s choice "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and Tyres: 235 / 75 R 17.5", per manufacturer’s choice Steel twin wheels, factory silver Braking system: 2-line air-operated brake system Spring-loaded parking brake Axle load detection via EBS CAN bus signal for display in truck cab (truck must be equipped accordingly; not a calibrated scale) Vehicle stability system: 2 non-interchangeable coupling heads at the front, connection lines to the tractor 12-24V EBS, electronic braking system with EBS socket at the front, including connecting cable (Knorr brand) Attention: The trailer may only be towed by vehicles that guarantee ABS functionality! Electrics: 12-24V, multi-chamber LED lights, side LED marker lights (yellow), LED license plate lighting (Note: Some towing vehicles may display incorrect errors despite proper function) 2 white front position lights, LED 2 white/red rear lane marker lights, LED 2 × 7-pin non-interchangeable sockets at the front, with connection cable 1 LED rotating beacon with bracket, switchable via sidelights (removable beacon) 2 pairs...

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New Fliegl 4-Axle Low Loader Trailer with Ramps, Model VTS 400 Gross weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Total length: 11,940mm Total loading length: approx. 10,410mm; Gooseneck: approx. 2,490mm; Loading platform incl. rear bevel: approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional information plus delivery/preparation from stock location 26639 Wiesmoor: €1,280.00 net Leasing offer: term 48 months, down payment only VAT, residual value 40% Monthly instalment EUR 759.00 Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear spray flap Half-shell mudguards on axle 1 + 2 with anti-spray flaps behind each axle Anti-spray flaps before and behind axles 3 and 4 Excavator arm recess over rear axles, stretching to the rear, approx. 1,800mm long, 650mm wide, 150mm deep 2 pairs of lashing holes (5t each) in the excavator arm recess, side-mounted on the longitudinal frame, approx. 300mm from the front and approx. 200mm before the rear bevel 1 plastic toolbox, w=600mm / h=425mm / d=460mm, lockable Storage box recessed into the gooseneck floor with lid, w=720mm / l=520mm / d=170mm Extendable widenings to 3,000mm (not at rear bevel) (Note: the track width of machines or vehicles being transported must not exceed the outer frame width of 2,550mm) Wooden plank compartment under the low-bed platform 70mm wooden planks for extension to 3,000mm Low loader lashing points 1 pair of lashing cutouts sunk in the longitudinal beam at the front of the gooseneck, 10t each 4 pairs of lashing holes in external frame (5t each, suitable for tension belt attachment) 9 pairs of lashing mushrooms set into the external frame above and on the sides, each 10t 2x front on gooseneck 7x low-bed area 1st lashing point 250mm from front, last max. 250mm from rear, max distance between lashing points 1,100mm Hnjdpovv D Ixefx Ag Iol 3 additional pairs of folding lashing eyes, 10t each: - 1x on gooseneck (protruding) - 1x inside start of low-bed area in longitudinal beams - 1x recessed in floor behind last axle Towing arrangement, turntable trailer Drawbar with certified 50mm draw eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice Chassis/axle laser alignment (reduces tyre wear and fuel consumption) Air suspension with raise & lower valve + auto reset function Wheels and tyres 235/75 R 17.5”, manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line pneumatic brake system Spring-loaded parking brake Axle load detection via EBS CAN-Bus signal (for in-cab display, truck must be pre-equipped, not a calibrated scale) Vehicle stability system 2 foolproof coupling heads at the front, with connecting lines to tractor unit 12-24V EBS (Electronic Braking System) with EBS plug at the front and connecting cable (Knorr brand) Note: Trailer must only be towed by towing vehicles capable of ensuring full ABS functionality! Electrics 12-24V, multi-chamber LED lamps, amber LED side markers, LED license plate lighting (Note: On certain tractor units, malfunction messages may appear even if operational) 2 white position lights at the front (LED) 2 white/red contour marker lights at the rear (LED) 2x 7-pin foolproof connectors at the front

Stanje: novo, največja dovoljena obremenitev: 30.310 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Gross weight: 40,000 kg Payload: 30,310 kg Unladen weight: 9,690 kg Overall length: 12,000 mm Loading length: 10,000 mm Loading bed: 7,150 mm including 850 mm drive-on slope Loading height: 900 mm 1st pair of wheel recesses after drop in the loading bed, length at bottom approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the loading bed, length at bottom 600 mm, 300 mm deep Extensions to 3,000 mm, warning boards, rotating beacon, comprehensive lashing package 5 pairs of stake pockets in the outer frame Excavator arm recess, 1,800 mm long, 150 mm deep Drawbar 50 mm Air suspension with raise/lower valve, separately operable BPW drum brakes Tyres: 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Ramps: 2,800 mm x 750 mm, hydraulically operated Hydraulic lateral displacement Hire purchase offer: term 48 months, residual value 40%, down payment only the VAT on the installments, monthly payment EUR 970.00 net Hnodpfxjnzlg Dj Ag Iol Vehicle available from 11.09.2023 from the Neumünster trade fair. Visit us at Nordbau - Stand West 121, right next to the main entrance. Further 3-, 4- and 5-axle low loaders new and used available immediately

Stanje: novo, največja dovoljena obremenitev: 31.100 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.520 mm, Gross weight: 24,000kg / 40,000kg Curb weight: 8,900kg Payload: 15,100kg / 31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm gooseneck, 7,920mm loading deck including rear bevel Width: 2,520mm Loading height: 900mm Further information: plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 net Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support Wheel chocks with holder Aluminium side underrun protection Rear mudflaps across the full width (not in combination with forklift holder) Half-shell fenders on 1st and 2nd axles with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axles Excavator arm recess over rear axles to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator recess at the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm (not in rear bevel) (Track width of machines/vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks under low-bed platform 70 mm timber for widening to 3,000 mm Low loader lashing eyes 1 pair of lashing cut-outs at the front longitudinal member in gooseneck, each rated 10 t 4 pairs of lashing holes in the outer frame, each 5 t (lashing strap attachment) Hnodpfx Asrducpjg Iol 9 pairs of recessed lashing mushrooms in the outer frame, top and side, each 10 t 2 x front on gooseneck 7 x in lowered bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, spacing not greater than 1,100 mm 3 pairs of additional folding lashing eyes, each 10 t: 1 x on gooseneck (protrudes) 1 x at beginning of low bed, recessed in longitudinal rails 1 x behind the last axle, recessed in the floor Trailer tow device Drawbar with certified 50 mm towing eye Drawbar height adjustable by spring Axles & suspension Drum brake axles, manufacturer's choice Axles/chassis laser aligned—reduces tire and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (equalisation rocking beams) Wheels and tires 235/75 R 17.5" manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connection leads to tractor unit 24 Volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by tractors supporting ABS function! Electrics 12–24 volt, multi-chamber LED lamps, side yellow LED marker lights, LED license plate lights (note: some tractors may show false diagnostics despite correct function) 2 white position lights at the front, LED 2 white/red lane marker lights at the rear, LED 2 x 7-pin foolproof connectors at the front, with connecting cable 1 LED beacon with holder, switched via position light (removable beacon) 2 pairs of warning plates, double LED illuminated and extendable to 3,000mm Floor Gooseneck front with steel/checker plate covering then approx. 70 mm softwood floor, in the wheel arch area steel/checker plate covering Rear bevel with 70 mm softwood floor A

Stanje: novo, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 11.940 mm, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 235/75R17,5, barva: drugo, Leto izdelave: 2026, 4-osna nizkopodna prikolica, vroče cinkana, razširljiva na 3000 mm. Jeklene rampe dolžine 3000 mm, širine 750 mm, hidravlično upravljanje s hidravličnim bočnim pomikom. Jama za rovokopačev izpust dolžine 1800 mm, širine cca 650 mm in globine 150 mm. Dno iz mehkega lesa debeline 70 mm. Hedpeyxft Tjfx Ag Ienl Vozilo na zalogi.

Stanje: novo, številka stroja/vozila: 15431365fe5515297a6a9fb05, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball-bearing ring Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium Full-width rear mud flaps Half-shell mudguards on 1st and 2nd axles with antispray mud flaps behind each axle, antispray mud flaps before and after 3rd and 4th axles Excavator arm recess above the rear axles, extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points each 5 t located in the excavator arm recess on the side at the main frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox with shelf insert, W=620/H=360/D=440 mm, can be locked with a padlock (lock not included) 1 storage box recessed into the floor at the gooseneck, with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm 70 mm timber planks for extension to 3,000 mm Storage compartment for timber planks under the loading platform Lashing eyes (40 securing options) 1 pair lashing eyes on gooseneck, each 5 t 9 pairs lashing mushrooms integrated on top and side of outer frame, each 10 t 2 x on gooseneck to the front 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each 5 t (for tension belt attachment) 3 pairs of additional folding lashing eyes, each 10 t 1 x inside next to the main frame at the beginning of the low-bed 1 x on gooseneck (protruding) 1 x recessed behind the last axle Trailer towing device turntable Drawbar with tested 50 mm towing eye, towing eye inclined 8°, D-value min. 160 kN Axles + Suspension Drum braked axles Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balance) front and rear Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable 1 LED beacon with holder, operated via sidelights (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel chequer plate covering Followed by 70 mm softwood floor, wheel arch area with steel chequer plate Rear bevel with 70 mm softwood floor Hnjdei Ri A Sspfx Ag Iel Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber overlay Spring-assisted lifting Country of registration / Plates Country of registration: Germany 24/7 service hotline Prepared for double-line licence plate holder Conspicuity marking with reflective strips according to ECE R 048, white at the side and red at the rear Warning panel according to ECE - 70 Coating Frame hot-dip galvanized incl. passivation, 15-year corrosion guarantee Drawbar galvanized or black, as per the manufacturer's choice Loading ramps hot-dip galvanized Attention! Archive pictures shown!

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902037402, lastna masa: 6.460 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2026, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.680 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.010 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 100 odstotek, odmik od tal: 310 mm, Leto izdelave: 2025, The images are archive photos // Vehicle may still be in use! - Patented "D-Lock" door retainer for I-Lock closure (not in conjunction with direct tarpaulin tensioner), awarded the “INTERNATIONAL TRAILER AWARD 2025” - Pallet box for 24 Euro pallets (ground clearance approx. 310 mm) - "Heavy Blocker" cross rear underrun protection + side roller buffer - 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable, mounted on both sides behind the axle assembly - 1 stowage box for fire extinguisher up to 6 kg, mounted on the bulkhead - 1 fire extinguisher (ABC powder, 6 kg) - 1st axle as automatic lift axle, including forced lowering and starting aid, operation "3x braking" - 3 pairs of movable sliding rings along the entire length, with 4-way stake pockets and a long pocket at the bottom - 5 rows of aluminum V-insert slats (in conjunction with drop sides: 4 rows) Hnjdpfsyc D H Sjx Ag Iel - 2 pairs of Vario steel slats, in conjunction with Vario beams for forward and rear load securing - Fliegl-Blitz sliding roof - Non-elastic roof, minimal deflection of roof beam during loading and unloading - Optimal rear rain gutter, fitted to the top of the end hoop above the doors - Fliegl manufacturer's certificate of body strength in accordance with EN 12642 XL - Currently fitted with customer livery; tarpaulins can be replaced, and rear branding can be covered!

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2015, naslednji pregled (TÜV): 06/2026, Oprema: ABS, Hangler Mega Trailer Side Loader Coil Drop Side BPW Hydraulic Lifting Roof All at a glance · First registration: 26/06/2015 · Colour: Blue · Unladen weight: 8,130 kg · Tyres: 435/50 R 19.5 · Note: Available immediately Special equipment Hydraulic tilting loading device with 4 cross beams, 5.85-meter coil well, hydraulic lifting roof, 60 cm drop side, 8 heavy-duty hooks, stake pockets and upright sockets, 4 extension panels, BPW axles, 12 pairs of lashing eyes, XL certificate, Wabco SmartBoard, 2 storage compartments in the load area, toolbox, 4 rows of slats, spare wheel holders with spare wheels, 2x fire extinguisher brackets + fire extinguishers, 2x7 + 1x15 pin E-connector, customs cord, ADR plate, A-plate, 2 fire extinguisher brackets, MOT valid until 06/26. Standard equipment 3-axle, disc brakes, ABS, EBS, lifting and lowering valve, reinforced front wall, rear access ladder, 2 chocks, sliding roof bar, underride protection. Errors, typing mistakes and prior sale reserved. The seller reserves the right to withdraw from the sale. _____ Internal reference number for enquiries: TR26156 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Sales contacts: Mr. Ing. Christoph Wimmer (German, English, Czech, Polish, Italian) p: Also WhatsApp t: @: Mr. Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / Also WhatsApp t: -104 @: Mr. Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / Also WhatsApp t: -123 @: We speak 13 languages. Surely yours as well. Contact us! Homepage: Facebook: Hedpfxsy Sq Tlj Ag Ienl Instagram: Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks and transporters. Michael Doblhofer (German, English) p: Also WhatsApp t: -102 @: Bastian Wagner (German, English) p: WhatsApp t: -103 @:

Stanje: rabljeno, lastna masa: 6.520 kg, največja dovoljena obremenitev: 23.480 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 8.610 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/140J, velikost zadnje pnevmatike: 235/75R17,5 ---/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Low-bed loading area length approx. 6.50 m, total loading area length approx. 8.60 m, loading height approx. 900 mm. This vehicle is being offered on behalf of a bank. Hnsdpfxjy Stths Ag Isl -- Subject to typographical errors, mistakes, and changes. Sample images -- More data at: ! More details: !

Stanje: novo, lastna masa: 8.200 kg, največja dovoljena obremenitev: 30.800 kg, skupna masa: 39.000 kg, skupna dolžina: 8.000 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, stanje pnevmatik: 100 odstotek, barva: črn, Oprema: ABS, Novo, BPW disk zavore, prvi os dvižen, aluminijasta platišča, zadnji izpust s potiskanjem preko hidravličnega bata, izolirano, mehansko odpiranje stranske stranice, električna pokrivala Cramaro, kapaciteta 24 kubičnih metrov. Hedpfsyv E Swsx Ag Isnl

Stanje: novo, konfiguracija osi: 3 osi, Oprema: ABS, Fliegl Container Chassis ADR, 1x20 / 2x20 / 1x30 / 1x40 / 1x45 Highcube Gooseneck, fully galvanized frame, BPW ? axles, lift axle, FOR RENT All at a glance: · First registration: New vehicle · Colour: Silver (fully galvanized) · Unladen weight: 4,940 kg · Tyres: 385/55 R 22.5 · Note: Several units available for immediate delivery Special equipment: Gooseneck container chassis suitable for: 1x20 / 2x20 / 1x30 / 1x40 / 1x45 / High Cube containers, ADR: EX1, EX2, and EX3, front and rear extension, FULLY GALVANIZED, rear height adjustment and foldable central supports for containers without tunnel, removable and attachable front container guides, plug-in adapter for front locking, extendable underrun protection for 25-foot containers, BPW ? axles, lift axle (including forced lowering and start-off aid, operation via 3x braking), EBS, ABS, axle load detection, rear and brake LED lights, 2x7 + 1x15-pin electrical connections, contour marking, 2 wheel chocks, aluminium side underrun protection, spare wheel holder, toolbox, document box. Standard equipment: Tri-axle, 430 mm disc brakes, lifting and lowering valve Errors, misprints, and prior sale reserved. The seller reserves the right to withdraw from the sale. _____ Internal reference number for inquiries: TR26051 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Contacts Sales / contact: Mr. Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: also WhatsApp t: @: Mr. Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / also WhatsApp t: -104 @: Mr. Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / also WhatsApp t: -123 @: We speak 13 languages. Surely yours as well. Contact us! Homepage: Facebook: Instagram: Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks, and vans. Hedexynqnepfx Ag Ijnl Michael Doblhofer (German, English) p: also WhatsApp t: -102 @: Bastian Wagner (German, English) p: WhatsApp t: -103 @:

Stanje: novo, konfiguracija osi: 3 osi, Oprema: ABS, Fliegl Container Chassis ADR, 1x20/2x20/1x30/1x40/1x45 Highcube Gooseneck, fully galvanized frame, BPW ? axles, lift axle Key Specifications · First registration: New vehicle · Colour: Silver (fully galvanized) · Unladen weight: 4,940 kg · Tyres: 385/55 R 22.5 · Note: Multiple units available immediately Special Features Gooseneck container chassis suitable for: 1x20 / 2x20 / 1x30 / 1x40 / 1x45 / Highcube container, ADR: EX1, EX2, and EX3, front and rear extension, FULLY GALVANIZED, adjustable rear height, foldable intermediate supports for containers without tunnel, plug-in and removable front container guides, adapter for front locking, extendable underrun protection for 25-foot containers, BPW ? axles, lift axle (incl. forced lowering and starting aid, operated via 3x brakes), EBS, ABS, axle load detection, LED tail and brake lights, 2x7 + 1x15 pin electrical connectors, contour marking, 2 wheel chocks, aluminium side underrun protection, spare wheel holder, toolbox, document box. Price listed per unit, also available individually. Standard Equipment 3-axle, 430mm disc brakes, lift and lower valve. Errors, misprints, and interim sale reserved. The seller reserves the right to withdraw from sale. _____ Internal Reference for Enquiries: TR26051 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Sales Contacts: Mr. Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: also WhatsApp t: @: Hnjdpjxynq Uefx Ag Iel Mr. Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / also WhatsApp t: -104 @: Mr. Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / also WhatsApp t: -123 @: We speak 13 languages. We’re sure to speak yours. Contact us! Homepage: Facebook: Instagram: Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks, and vans. Michael Doblhofer (German, English) p: also WhatsApp t: -102 @: Bastian Wagner (German, English) p: WhatsApp t: -103 @:

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, lastna masa: 6.575 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 07/2011, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.300 mm, skupna dolžina: 13.650 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, stanje pnevmatik: 30 odstotek, medosna razdalja: 1.360 mm, Leto izdelave: 2011, Oprema: ABS, Rabljen odprt polpriklopnik Jeklena sprednja stena z izbočenjem za dolge jeklene profile Tla okrepljena z jeklenimi profili Stranski žepki za stebričke Skladiščna škatla za vstavljive stebričke Hsdey Ercbopfx Ag Isnl

Stanje: rabljeno, lastna masa: 7.375 kg, največja dovoljena obremenitev: 27.625 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2012, dolžina tovornega prostora: 13.650 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5 160J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/65R22,5 160J, velikost zadnje pnevmatike: 385/65R22,5 160J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, Lash pockets, -- Errors in printing, mistakes, and changes reserved, sample images --, More data at: !, More details: ! Hnodpoy Nivtofx Ag Iol

Stanje: rabljeno, lastna masa: 5.300 kg, največja dovoljena obremenitev: 12.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2010, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.900 mm, prostornina tovornega prostora: 52 m³, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/141J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/141J, velikost zadnje pnevmatike: 235/75R17,5 ---/141J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Lashing eyes, -- Typographical errors, mistakes and changes excepted, sample images --, More data at: !, More details: ! Hsdjy Niuiepfx Ag Isnl

Stanje: rabljeno, lastna masa: 4.300 kg, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2019, dolžina tovornega prostora: 7.200 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R19,5 160J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 445/45 R19,5 160J, velikost zadnje pnevmatike: 445/45 R19,5 160J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Printing errors, mistakes and changes excepted, sample images shown. For more details, visit: ! Hedpfxoy Nitro Ag Ijnl

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33903000211, lastna masa: 7.707 kg, največja dovoljena obremenitev: 27.293 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, dolžina tovornega prostora: 15.030 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.655 mm, prostornina tovornega prostora: 101 m³, skupna dolžina: 15.350 mm, skupna širina: 2.550 mm, skupna višina: 4.005 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", Leto izdelave: 2023, The images are archive photos; the vehicle may still be in use! Vehicle consists of: Chassis semi-trailer for freight forwarding Fine-grain steel welded lightweight construction to the support legs, fifth wheel plate with replaceable 2-inch kingpin 24 t 2-speed landing gear, single-side operation, with straight lower part Pull-out ladder at the rear Side door holders 2 wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel, with wide Fliegl mud flaps Foldable mudguard for lighting unit Quarter shell mudguards Rear impact protection Tarp rod with bracket 1 plastic toolbox Hnodpsy Snmpjfx Ag Isl Axles & Suspension 3 BPW disc brake axles "Axle/chassis laser alignment" – reduces tyre wear and fuel consumption Air suspension Brake System 2-line compressed air braking system Coloured hose runs for easy maintenance Spring-type parking brake Duomatic EBS, electronic braking system with EBS socket at the front, no connecting cable Note: The trailer must only be towed by tractors that guarantee the effectiveness of the ABS! With lift & lower valve Vehicle - Driving Stability System AAC Basic, automatic lift axle on the last axle, acts as shunting aid up to 20 km/h, manually switchable Axle load detection via EBS CAN bus signal Wheels and Tyres 385/55 R22.5 – make at manufacturer’s choice Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting Side yellow LED lighting connected to indicator “flashing side markers” 2 white front position lights 2 white/red lane departure lamps at the rear 2 x 7-pin and 1 x 15-pin misconnection-proof sockets at the front, no connecting cable SB Hydraulics Hydraulic cylinder with sliding mechanism integrated into the floor. 2-circuit hydraulics. Direction change (forward/reverse) is electrically operated by wired remote control. Hydraulic actuation via truck PTO Hydraulic connection with hose at front wall and HDK screw connector Recommended pump capacity: Flow rate: 110 l/min Pressure: 250 bar Min. oil tank capacity: 100 l Floor planking made of aluminium, 8 mm profiled, grooved Aluminium box body from high-quality, wear-resistant material. Front and side walls made from aluminium hollow profiles, all round at the top welded with a wide special reinforcement profile in aluminium Sliding wall for easier unloading, with reinforced tarpaulin at the bottom Rear wall from aluminium hollow profiles, double-winged door divided 1/2 to 1/2, with special U-profile frame with stop and rubber gasket all round, 2 external swing bolt locks, locked top and bottom. Rear wall with mechanical safety lock, operation at the rear on the left in direction of travel, with pivoting crossbar at top. Standing platform with ladders on both sides 3 removable, swivel crossbars for tarp support Sliding sheet, stowable on one side, with 2 longitudinal tensioning straps, 3 ratchet straps at the side Operating Instructions Special permit required if total hitch length exceeds 16,500 mm. Country of Registration / Plates Germany with Dekra inspection and certificate (§13 EC-FGV) Warning sign "Long HGV" Long-HGV combination inspection certificate Driver instruction at Triptis factory for up to 4 persons per truck combination Paintwork Frame: DB 7350 Novagrau tipper body: aluminium natural finish Tarpaulin: RAL 7035 light grey

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: WFDFLT33901007921, lastna masa: 9.000 kg, največja dovoljena obremenitev: 26.000 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2018, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 15.150 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 15.350 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: črn, Leto izdelave: 2018, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/Technical Gross Weight: 35,000 / 39,000 kg Permissible/Technical Payload approx.: 26,000 / 30,000 kg Permissible/Technical Axle Load: 24,000 / 27,000 kg Permissible/Technical Kingpin Load: 11,000 / 12,000 kg Unladen Weight approx.: 9,000 kg +/- build tolerance Overall length approx.: 13,850 + 1,500 mm Overall width max.: 2,550 mm Overall height approx.: 3,200 mm Internal length approx.: 13,650 + 1,500 mm Neck length approx.: 4,050 mm Low bed length approx.: 9,600 + 1,500 mm Internal width approx.: 2,480 mm Loading height (low bed) approx.: 900 mm Fifth wheel height approx.: 1,150 mm Kingpin mounting dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis | Fifth-Wheel Platform Haulage Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Lashing rings recessed into outer frame, each rated at 2.5 t Hnsdpfx Agey Slp Io Iol 24 t, 2-speed landing gear, single-sided operation, with straight lower section, no lateral compensation Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards in front of 1st axle and behind each axle With anti-spray mudflaps behind each axle Rear collision guard Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm Document box, front bulkhead mounted Telescoping Central tube frame made of cleanly welded, interlocking telescopic frame sections. Extendable by max. 1,500 mm and lockable after approx. 1,500 mm, outer frame sections approx. 1,500 mm long for insertion into the outer frame when extended Locking by mechanical pin locking Axles & Suspension SAF drum brake axles Air suspension Brake System 2-line compressed air brake system Spring-loaded parking brake 2 error-proof coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connection cable Note: This trailer may only be towed by tractors that ensure the effectiveness of the ABS! With lift & lower valve Wheels & Tires 235 / 75 R 17.5 Steel twin wheels, factory silver Electrics 24 Volt, multi-chamber rear lights, lateral LED marker lights (yellow) 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin error-proof sockets at the front, without connection cable Rotating beacon with holder, controlled via parking light (lamp removable) Floor Non-slip phenolic plywood panels approx. 30 mm thick, for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Where required in wheel arch areas: steel/chequer plate covering Bulkhead/Front Stakes 25 mm aluminium hollow section, 1,950 mm high, steel front stakes, full height in heavy duty design Certification / Signage With Dekra inspection and appraisal Prepared for single-line license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape according to ECE R 048, lateral white and rear red Attention, the images shown are archive photos! The vehicle may currently be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33903000364, lastna masa: 6.120 kg, največja dovoljena obremenitev: 28.880 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: srebrn, Leto izdelave: 2022, Attention: The images are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- build tolerance Overall length approx.: 13,800 mm Max. overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low-bed length approx.: 9,600 mm Loading height in low-bed, loaded approx.: 900 mm Internal width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis semi-trailer for haulage company Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping at the beginning of the low-bed extendable by approx. 1,500 mm, lockable every 500 mm Hedpfx Ajy Slhqsg Ijnl Slightly sloped new outer frame design with "Load-Lock profile" for securing lashing straps "Patented Load-Lock-Cross" for attaching lashing straps, mounted on the crossmember underneath the outer frame 24 t two-speed landing gear, single-sided operation, with straight lower section, without load equalizer Free landing leg corner dimension or free rear swiveling radius of approx. 1,920 mm Side underrun protection: aluminum Rear underrun protection: steel Quarter shell mudguards 9 pairs of lashing/ stanchion rails recessed across the floor up to the main frame, approx. 100 mm high. With 20 mm round steel bars top and bottom, spacing between bars approx. 60 mm. Bottom with angle plate as closure, half open downwards. For securing and inserting stanchions 80 x 80 mm (3 pairs in gooseneck, 6 pairs in low-bed area) 3 pairs of stake pockets recessed in the outer frame, internal dimension approx. 72 x 42 mm Axles & Suspension: Drum brake axles as per manufacturer’s choice "Laser-measured axles/chassis" for reduced tire and fuel consumption Air suspension Brake system: 2-line compressed air braking system Color-coded piping for easy service Spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line EBS electronic braking system, EBS socket at front, no connecting cable Note: The trailer must only be towed by tractor units that guarantee the effectiveness of the ABS! With lift and lower valve Vehicle stability system Wheels and Tires: 235/75 R17.5, manufacturer at the buyer’s discretion Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, yellow LED side lighting (recessed inward) 2 white position lights front 2 white/red lane marker lights rear 2 x 7-pin foolproof sockets at the front, no connecting cable 1 additional LED work light at rear, switched via reverse light Floor: Approximately 30 mm thick anti-slip plywood, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front wall / front corner stanchions: 25 mm aluminum hollow profile, 1,350 mm high Country of registration / plates: Germany Inspection and certificate in Bosnia 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective tape in accordance with ECE R 048, white on the sides, red at the rear Warning sign according to ECE 70 Painting: Frame: hot-dip galvanized incl. passivation “15-year guarantee against corrosion perforation” Front corner pillars: hot-dip galvanized Front wa