Nizki nakladalnik

Fliegl VTS S Parab/Feder

Further information

Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty ball-bearing ring
Foldable rear support
2 wheel chocks with holders
Side underrun protection made of aluminium
Full-width rear mud flaps
Half-shell mudguards on 1st and 2nd axles with antispray mud flaps behind each axle, antispray mud flaps before and after 3rd and 4th axles
Excavator arm recess above the rear axles, extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points each 5 t located in the excavator arm recess on the side at the main frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel
1 plastic toolbox with shelf insert, W=620/H=360/D=440 mm, can be locked with a padlock (lock not included)
1 storage box recessed into the floor at the gooseneck, with lid, W=720 mm / L=520 mm / D=170 mm
Extendable width to 3,000 mm
70 mm timber planks for extension to 3,000 mm
Storage compartment for timber planks under the loading platform
Lashing eyes (40 securing options)
1 pair lashing eyes on gooseneck, each 5 t
9 pairs lashing mushrooms integrated on top and side of outer frame, each 10 t
2 x on gooseneck to the front
7 x in the low-bed
6 pairs of lashing holes in the outer frame of the low-bed, each 5 t (for tension belt attachment)
3 pairs of additional folding lashing eyes, each 10 t
1 x inside next to the main frame at the beginning of the low-bed
1 x on gooseneck (protruding)
1 x recessed behind the last axle
Trailer towing device turntable
Drawbar with tested 50 mm towing eye, towing eye inclined 8°, D-value min. 160 kN
Axles + Suspension
Drum braked axles
Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balance) front and rear
Wheels and Tyres
235 / 75 R 17.5
Manufacturer's choice
Steel rims, twin arrangement, factory silver
Brake system
2-line compressed air braking system
Bsdsi Ri A Sopfx Ah Eodi
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle
ABS and ALB, with ABS plug at the front, with connection cable
Electrics
24 Volt, multi-chamber lights, lateral yellow LED lighting
2 white position lights at the front
2 white/red marker lights at the rear
2 x 7-pin non-interchangeable plugs at the front, with connection cable
1 LED beacon with holder, operated via sidelights (removable beacon)
2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm
Floor
Gooseneck at front with steel chequer plate covering
Followed by 70 mm softwood floor, wheel arch area with steel chequer plate
Rear bevel with 70 mm softwood floor
Loading ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
Timber overlay
Spring-assisted lifting
Country of registration / Plates
Country of registration: Germany
24/7 service hotline
Prepared for double-line licence plate holder
Conspicuity marking with reflective strips according to ECE R 048, white at the side and red at the rear
Warning panel according to ECE - 70
Coating
Frame hot-dip galvanized incl. passivation, 15-year corrosion guarantee
Drawbar galvanized or black, as per the manufacturer's choice
Loading ramps hot-dip galvanized
Attention! Archive pictures shown!

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.