Prikolica z nizko platformo

FLIEGL VTS 400 S Luft/ Hydr. 4-Achs Tieflader -902

New vehicle: Fliegl 4-axle low-loader trailer with ramps, model VTS 400

Gross weight: 24,000 kg / 40,000 kg
Unladen weight: 8,080 kg
Payload: 15,920 kg / 31,920 kg
Overall length: 11,940 mm
Loading length: total approx. 10,410 mm; neck approx. 2,490 mm; loading bed incl. rear taper approx. 7,920 mm
Width: 2,550 mm
Loading height: 900 mm
Further information:
Plus pre-freight / preparation ex stock 26639 Wiesmoor: €1,280.00 / net

Chassis: Low-bed trailer
Steel welded construction
Turntable with heavy-duty ball race ring
Foldable rear support
2 wheel chocks with holders
Side underrun protection, aluminium
Full-width rear mud flap
Half-shell mudguards, 1st and 2nd axles with anti-spray flaps behind each axle,
Anti-spray flaps in front of and behind 3rd and 4th axles
Excavator stick trough over rear axles to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep
2 pairs of lashing holes, each 5 t, in the excavator stick trough on the longitudinal frame, approx. 300 mm from the front and 200 mm in front of the rear slope
1 plastic toolbox, w=600 mm / h=425 mm / d=460 mm, lockable
Storage box recessed in the neck floor with lid, w=720 mm / l=520 mm / d=170 mm
Extendable outriggers to 3,000 mm (not for rear slope)
(Track width of construction machinery/vehicles to be transported must not exceed external frame width of 2,550 mm)
Storage compartment for wooden planks under the low-bed deck
Wooden planks, 70 mm, for extension to 3,000 mm
Lashing points, low-loader:
1 pair of lashing cutouts in the front longitudinal beams, embedded in the neck, each 10 t
4 pairs of lashing holes in the outer frame, each 5 t (for attaching ratchet straps)
9 pairs of lashing mushrooms, embedded in and above the outer frame, each 10 t:
- 2 × on the neck
- 7 × in the low-bed section
First lashing point 250 mm from the front, last max. 250 mm from the rear; lashing point spacing max. 1,100 mm
Additionally, 3 pairs of folding lashing eyes, each 10 t:
- 1 × on the neck (protruding)
- 1 × at the start of the low-bed inside the longitudinal beams
- 1 × in the floor behind the last axle
Drawgear, turntable trailer:
Drawbar with certified 50 mm eye
Drawbar height adjustment via spring
Axles & Suspension:
Drum brake axles, per manufacturer’s choice
"Axles/chassis laser-aligned" to reduce tire wear and fuel consumption
Air suspension with lift & lower valve + auto-reset function

Wheels and Tyres:
235 / 75 R 17.5",
per manufacturer’s choice
Steel twin wheels, factory silver

Pjdsxrx Nljpfx Af Nsgu
Braking system:
2-line air-operated brake system
Spring-loaded parking brake
Axle load detection via EBS CAN bus signal for display in truck cab (truck must be equipped accordingly; not a calibrated scale)

Vehicle stability system:
2 non-interchangeable coupling heads at the front, connection lines to the tractor
12-24V EBS, electronic braking system with EBS socket at the front, including connecting cable (Knorr brand)
Attention: The trailer may only be towed by vehicles that guarantee ABS functionality!

Electrics:
12-24V, multi-chamber LED lights, side LED marker lights (yellow), LED license plate lighting
(Note: Some towing vehicles may display incorrect errors despite proper function)
2 white front position lights, LED
2 white/red rear lane marker lights, LED
2 × 7-pin non-interchangeable sockets at the front, with connection cable
1 LED rotating beacon with bracket, switchable via sidelights (removable beacon)
2 pairs...

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.