Prikolica z nizko platformo

FLIEGL VTS 400 S Parabel/ Hydr. 4-Achs Tieflader NEU

Gross weight: 24,000kg / 40,000kg
Curb weight: 8,900kg
Payload: 15,100kg / 31,100kg
Total length: 11,940mm
Loading length: 10,410mm total, 2,490mm gooseneck, 7,920mm loading deck including rear bevel
Width: 2,520mm
Loading height: 900mm
Further information:

plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 net

Steel welded construction
Turntable with heavy-duty ball-bearing slewing ring
Foldable rear support
Wheel chocks with holder
Aluminium side underrun protection
Rear mudflaps across the full width (not in combination with forklift holder)
Half-shell fenders on 1st and 2nd axles with anti-spray mudflaps behind each axle
Anti-spray mudflaps in front of and behind 3rd and 4th axles
Excavator arm recess over rear axles to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep
2 pairs of lashing holes (5 t each) in the excavator recess at the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel
1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable
1 storage box embedded in gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm
Extendable width to 3,000 mm (not in rear bevel)
Blodpfxorducps Adtop
(Track width of machines/vehicles to be transported must not exceed outer frame width of 2,550 mm)
Storage compartment for timber planks under low-bed platform
70 mm timber for widening to 3,000 mm
Low loader lashing eyes
1 pair of lashing cut-outs at the front longitudinal member in gooseneck, each rated 10 t
4 pairs of lashing holes in the outer frame, each 5 t (lashing strap attachment)
9 pairs of recessed lashing mushrooms in the outer frame, top and side, each 10 t
2 x front on gooseneck
7 x in lowered bed
First lashing eye 250 mm from the front, last max. 250 mm from the rear, spacing not greater than 1,100 mm
3 pairs of additional folding lashing eyes, each 10 t:
1 x on gooseneck (protrudes)
1 x at beginning of low bed, recessed in longitudinal rails
1 x behind the last axle, recessed in the floor
Trailer tow device
Drawbar with certified 50 mm towing eye
Drawbar height adjustable by spring
Axles & suspension
Drum brake axles, manufacturer's choice
Axles/chassis laser aligned—reduces tire and fuel wear
Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (equalisation rocking beams)
Wheels and tires
235/75 R 17.5"
manufacturer's choice
Steel rims in twin configuration, factory silver
Braking system
2-line compressed air brake system
Spring-loaded parking brake
2 foolproof coupling heads at the front with connection leads to tractor unit
24 Volt ABS and ALB, with ABS connector at front, with connecting cable
Note: The trailer may only be towed by tractors supporting ABS function!

Electrics
12–24 volt, multi-chamber LED lamps, side yellow LED marker lights, LED license plate lights (note: some tractors may show false diagnostics despite correct function)
2 white position lights at the front, LED
2 white/red lane marker lights at the rear, LED
2 x 7-pin foolproof connectors at the front, with connecting cable
1 LED beacon with holder, switched via position light (removable beacon)
2 pairs of warning plates, double LED illuminated and extendable to 3,000mm

Floor
Gooseneck front with steel/checker plate covering
then approx. 70 mm softwood floor, in the wheel arch area steel/checker plate covering
Rear bevel with 70 mm softwood floor
A

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.