Müller-Mitteltal Müller Schneepflüge Breit 3.60 M nakup rabljenega (42.877)

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem equalising unit with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance ball coupling for K80 ball head coupling (adjustable by +77 mm / 33 mm via the head plate) with elevated bracket for connection lines * 12 V 7 + 4 pin power supply * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, switchable from the towing vehicle without additional installations on the tractor unit * Side marker lamps with indicator function * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Chassis made of high-tensile steel * Steel platform body, 3-way tipper with M-Strong side boards (fixed front wall, continuous side walls – without central stanchions – swinging via manual central locking as well as mechanically folding down with sideboard spring assist) Lasdpfx Ahjr Dpzuoksa * Hydraulic tailgate, 500 mm high, acts as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * 1 x 7 t anchor point in each corner and 4 x 3 t lashing rings recessed and foldable on each side * Galvanised two-step access in front of the front wall (left side) * 1 pair of aluminium loading ramps (10 t / pair for axle spacing over 2,500 mm) 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 recessed ramp compartments at the rear of the chassis, cargo securing according to EN 12642 XL * --Coupling height loaded approx. 530 mm * Unloaded approx. 590 mm -- * Bodywork finished in RAL 9010 pure white * Chassis, drawbar, rear drop supports, underrun protection galvanised * Axles, air tanks, front support winch * K80 coupling painted in black tone * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex-works Egestorf

Stanje: novo, največja dovoljena obremenitev: 5.840 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, Leto izdelave: 2025, * KWH 8.8 ML: * RDÜ Tire Pressure Monitoring * EBS Brake System * Drum Brakes * BPW Axle * Parabolic Springs * Front Support Winch * Rear Square Tube Support Legs with Spring Assistance, Base Plate, and Safety Locking Pins for Adjustable Support Heights * Drawbar with 40 mm Bolt-on Eye (height adjustable, __ mm) * 15-pin Electrical Connector * LED Lighting Lasdpfx Aheu I Iqlskea * Flashing LED Side Marker Lights * Chassis made of torsion-resistant square tubes and cross beams * Enclosed steel mudguards with splash protection * Enclosed lateral underrun protection usable as advertising space * Plastic toolbox with floor insert (installed horizontally), approx. 500 x 350 x 400 mm * Swiveling cable drum carrier, clear width between drum arms 1,700 mm, with tension fastener for securing the drum to the carrier arms and a central pawl lock for securing the cable drum carrier to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft diameter 76 mm, with centering and rotating ends * 1 Pair of stepped Polyamide Centering Cones * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Finish: Hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lift and lowering function * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation necessary * 15-pin power connector * LED lighting * Landing gear at the front * Rear fold-out support legs mounted externally Laodpfxsl Th Dfs Ahkoa * Plastic toolbox approx. 858 x 500 x 500 mm mounted at the front right-hand side of the front wall * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks * Bolted bulkhead made from smooth sheet metal * Steel side walls – trapezoidal profile – foldable, split once in the center * Steel rear wall can be slid in between the ramps; mounting fixture for storage inside in front of the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing brackets possible every 600 mm – 4 lashing rings installed on each side * Each front and rear corner equipped with 1 x 6.3 t lashing ring * Various holes for 1.2 t lashing options in the front and rear cross members * One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding support legs and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye and landing gear painted in black * Side wall color freely selectable up to approx. 2 weeks before production date, but no metallic or special colors * --reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available in Egestorf

Stanje: novo, največja dovoljena obremenitev: 27.940 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lift and lower function, including RtR valve * Start assist for shunting, applied to first axle via EBS – no truck-side installation – when lift axle is raised +30 mm ride height * Smart-Board installed on trailer as an info tool, with pressure sensors for total axle load indication * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for trailing axle controlled from driver’s cab for maneuvering purposes via EBS (no truck-side installation) * 2" king pin * 1 lift axle * Side underrun protection * Front aluminium drop support legs and rear swing-down supports on chassis * Alcoa LVL One aluminium wheels * 15-pin electrical connector * LED lighting 12/24 V * Removable rear LED beacon * 2 additional LED reverse lights * 2 LED work lights mounted on trailer sides – no truck-side installation * 7-pin power socket at rear for overlength lighting * Side marker lamps with indicator activation * Tyre pressure monitoring system with display in truck via EBS signal (no truck-side installation) * Mechanically adjustable warning sign sets front and rear * Straight steel fenders * Saddle platform with 45° bevelled front corners and front toolbox made of galvanized, powder-coated steel sheet (B = 2,480 x H = 500 x L = 665 mm), top hinged lid and side doors at the beveled corners * 400 mm aluminium side boards (RAL 9010 pure white) fold-down and removable, mounted laterally on the saddle platform * Rear wall –150 mm– slotted in * Tapered rear on the saddle platform to lowbed approx. 700 mm long with chequer plate covering and lashing bar at end for attaching aluminium ramps * Saddle and lowbed platform with 50 mm clamped wooden planks * Tear plate above the axles * Prepared for 3 mounting shafts under the saddle platform for optional aluminium ramps storage * Swing arm as a carrier for connection lines from truck to trailer * Load securing package consisting of: outer frame of the saddle platform with punched holes, 45° bent and hole-pattern for lashing devices (2 t lashing force per point, min. 480 mm spacing), side-mounted 2 x 6.3 t recessed lashing rings per side, 1 x 16.5 t lashing ring per side at incline from lowbed to saddle platform, 2 pairs 16.5 t lashing rings in lowbed (1x on longitudinal beams after the step, 1x above the centre axle beside longitudinal beam), side 3 x 13.4 t lashing rings per outer frame (1x at start of platform step, 1x start of ramp slope, 1x end of ramp slope), 3 x 10 t each side (2x between front wheel recess and 1st axle, 1x between 2nd and 3rd axle), 3 x 5 t per side screwed to the wheel recess outer frames (2 at front, 1 at rear recess) * Extended excavator arm trough from end of last rigid axle over steering axle to end cross member, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 / D front = 170 mm; each side 2 x 6.4 t lashing rings in the arm trough * Each side two wheel recesses, 390 mm deep and 640 mm wide for transporting wheel loaders with wheelbase 3,000–3,590 mm, tyre diameter up to 1,760 mm – retractable covers – * Second retractable cover ... Laodpfx Aowh Hdxehkea

Stanje: novo, največja dovoljena obremenitev: 5.840 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, Leto izdelave: 2025, * KWH 8.8 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brake * BPW axle * Parabolic springs * Front support winch * Rear spring-assisted square tube supports with base plate, safety locking pins for variable support heights * Drawbar with 40 mm bolt coupling (height-adjustable in mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed steel mudguards with splash protection * Closed lateral underrun protection, suitable for use as advertising space * Plastic toolbox with base insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum mount, light width between drum arms 1,700 mm - with tension lock for drum securing at the ends of the support arms and a center-mounted claw lock for securing the cable drum mount to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, including centering and rotatable ends * 1 pair of stepped polyamide centering cones Laodpfxju I Iq Eo Ahkea * Hydraulic power unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Surface hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 9.070 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 325 mm, Leto izdelave: 2024, * ETS-TA-B 11,9: * Wabco EBS (elektronisches Bremssystem) * RDÜ (Reifendrucküberwachung) * Trommelbremsen, 2 x 5,5 t Gigant Achsen * Parabelfedern mit Ausgleichsaggregat * ca. 300 mm höhenverstellbares Zugrohr * BPW Stützwinde * mechanische Fallstützen hinten * Kunststoff-Werkzeugkasten vorne rechts an der Stirnwand * seitlicher Anfahrschutz * LED-Beleuchtung * 50 mm Nadelholzboden * in den Ecken vor der Stirnwand und am Abschlussträger jeweils 1 x 6,3 t Zurröse sowie seitlich je 2 x 6,3 t UVV-Zurringe im Außenrahmen eingelassen * einteilige mechanische Gitterrost-Auffahrrampen mit Federmechanismus für Einmannbetrieb ca. 2.350 x 870 mm (Innenabstand 20 mm, Rampen nicht verschiebbar) Laedjwyhzpepfx Ahkoa * Stirnwand, Seitenwände, Kotflügel und Zugrohr feuerverzinkt * Achsen, Federn, Luftkessel, Stützwinde vorne in einem Schwarzton lackiert * Neufahrzeug mit voller Herstellergewährleistung * Irrtümer und Zwischenverkauf vorbehalten * Sofort lieferbar ab Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lifting and lowering mechanism * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with in-cab display via EBS signal – no vehicle-side installation required * 15-pin power connector * LED lighting * Front support winch * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, front right exterior on front wall * Side underride guard * Plastic quarter mudguards * 50 mm softwood flooring * Provisions in front of front wall and rear for retrofitting 20" container locks * Bolted smooth sheet front wall * Side walls made of trapezoidal-profile steel sheet, foldable, split 1x in the middle * Steel rear wall, insertable between the ramps, storage bracket for non-use inside at the front wall * Bolted rear stakes * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing eyes possible every 600 mm – 4 lashing rings each side installed * In each corner (front and rear) 1 x 6.3 t lashing ring * Various bores in front and end crossmember for 1.2 t lashing points * One-piece mechanical grating-type loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) Lodjl Thvxopfx Ahkoaa * Rear drive-on slope approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in black * Side wall paint color freely selectable up to approx. 2 weeks before production date, metallic and special colors excluded * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available immediately Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.450 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 22.420 mm, višina nakladalnega prostora: 1.500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: * includes 1 m mesh side extensions * EBS brake system * Emergency release device for spring brake cylinders * RDÜ tire pressure monitoring system * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem equalizing unit * 300 mm height-adjustable hot-dip galvanized tow bar with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical hot-dip galvanized folding supports at the rear * Tool box made of galvanized steel sheet, right side * 15-pin electrical connector * Bolted underrun protection with LED tail lights * Plastic quarter mudguards * Net hooks mounted on sides and rear in the central locking compartments as well as 3 external hooks on the front wall * Hot-dip galvanized chassis * Steel 3-way tipper body, fully galvanized * Continuous, fold-down side walls without central stanchion, equipped with drop-side spring lifter * Tailgate fold-down and swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion * One recessed folding 5 t lashing ring per corner and 4 folding 3 t lashing rings on each side * Recessed, folding lashing rings in the outer frame * 4 mm steel floor plate * Rear ramp channel for loading ramps * Body reinforced with load securing certificate according to EN 12642 XL * 1 pair of aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear, recessed under the loading surface in the chassis * 235/75 R 17.5 tires * Axles, springs, air tanks, drawbar, and supports painted in black * Side wall color hot-dip galvanized * 1-meter mesh side extensions, galvanized * Sample photos * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available immediately ex works Egestorf on the A7 Ljdpfx Ahsp Ncl Sjkjaa

Stanje: novo, največja dovoljena obremenitev: 10.700 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 1.500 mm, Oprema: ABS, * KA-TA-R 14.4: * Front wall and floor hot-dip galvanized * Wabco ABS * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable hot-dip galvanized drawbar (approx. 300 mm) with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Rear: 2 mechanical hot-dip galvanized folding supports * 15-pin power connector * Multi-chamber tail lights * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet three-way tipper body * Continuous sidewalls in white, top with internal pipe reinforcement, foldable without center stanchions, with drop side spring assist * Tailgate foldable and swinging, manual central locking * Hot-dip galvanized screwed rear stanchions * Each corner equipped with 1 x 5 t lashing point, plus 4 x 3 t lashing rings recessed into the outer frame per side * 4 mm fine-grained steel floor plate * Net hooks, rear ramp mounting rail * Prepared for subsequent fitting of drop side extensions * Reinforced body with load securing certificate per EN 12642 XL * 1 pair of aluminium ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment recessed into the chassis below the loading area * Axles, springs, air reservoir, and landing gear painted in a shade of black * Side walls painted RAL 9010 pure white Lasdpfx Ahop Ncmaoksa * 1 meter galvanized mesh side extensions * Tyres: 285/70 R 19.5 * Sample images * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex works Egestorf, A7

Stanje: novo, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2024, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * Tire pressure monitoring system (TPMS) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles Ljdpfx Ahsl Tq Eueksaa * Air suspension with manual lowering at rear * Pressure gauge for axle load determination (axle-specific on two air suspension circuits) * Side underrun protection * Swing-down supports at rear chassis frame * Mechanically adjustable warning panel sets front and rear * Front closed plastic fenders and rear straight galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Fold-down (hot-dip galvanized) toolbox lid on fifth-wheel platform * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 2 x 7-pin electrical sockets * Four stake pockets per side, each with simultaneous 2 t lashing capacity * Load securing package consists of: 2 lashing eyes (6.4 t) at front left & right on main frame of fifth-wheel platform, 5 pairs of UVV-certified lashing rings, swiveling and lowerable, loadable in all directions and recessed in outer frame – in corners 13.4 t, otherwise 10 t. * 6 pairs of mechanical folding outriggers for total width of 3 m (excluding rear slope) * Widening planks stowed in center of loading bed * Hydraulically operated, one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm loading slope) * Chassis, turntable, drawbar, fold-out extensions & loading ramps hot-dip galvanized * Axles, turntable, air tanks, etc., finished in black paint * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross weight * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem compensating aggregate with 100 mm wide parabolic springs * Support windlass at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance K80 ball coupling (offset by +77 mm / 33 mm adjustable via head plate) with elevated gantry for connection lines * 12 V 7 + 4 pole electrical wiring * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, switchable from towing vehicle without vehicle-side installation * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Chassis made of fine-grain steel * Steel Pal.- three-way tipper body with M-Strong side walls (fixed front wall, continuous side walls without central stanchions, swinging via manual central locking and mechanically foldable with side wall spring lifter * Hydraulic tailgate, 500 mm high, acts as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * In each corner 1 x 7 t, and on each side 4 x 3 t recessed and foldable lashing rings * Hot-dip galvanized two-step access ladder in front of the front wall (left side) * 1 pair of aluminum ramps (10 t/pair with axle distance over 2,500 mm) 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 rear-integrated storage compartments for aluminum ramps in the chassis; load securing according to EN 12642 XL * --Coupling height loaded approx. 530 mm * unloaded approx. 590 mm-- Laedpfx Ahor Dpz Hjkea * Body paint finish in RAL 9010 pure white * Chassis, drawbar, rear drop supports, underrun protection are hot-dip galvanized * Axles, air tanks, front support windlass * K80 coupling painted in a shade of black * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 25.230 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2012, Oprema: ABS, Müller Mitteltal 2-axle concrete semi-trailer, model SF32 BM/BT, superstructure type: HTM 1004 Liebherr, 10 m³, year of manufacture 2012; BPW axles, drum brakes, air suspension, lift axle, underrun protection, EBS, ABS. Single ownership Inspection book available Permissible total weight: 32,000 kg Lajdpfx Aherdt H Ejkea Unladen weight: 6,770 kg

Stanje: rabljeno, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, skupna širina: 2.550 mm, Leto izdelave: 2023, Müller Mitteltal KA-TA-R 11.9 Tandem 3-Way Tipper with many extras. Gross weight: 11,900 kg. Standard payload approx.: 8,750 kg. Internal dimensions: 5,000 x 2,420 x 500 mm. Tyres: 385/55R19.5. 4-coat single-color paint. Wheels: silver. Chassis/underrun protection: hot-dip galvanized. Platform with front wall: hot-dip galvanized. Axles/springs/air reservoir, etc.: black. Side and rear wall: RAL 2011 deep orange. Reinforced and certified superstructure according to EN 12642 XL including load securing certificate (only in combination with 500 mm high steel side walls). Rear stanchions bolted, hot-dip galvanized, without topcoat. Lashing points LC 5,000 daN, recessed at the front. Mesh hooks integrated laterally and at the rear into the locks of the central locking for the base side wall, as well as an additional 2 pieces on the front wall. BPW axles instead of GIANT. Tipping platform with fixed-mounted front wall in hot-dip galvanized version, with bolted, galvanized rear stanchions, without additional coating (not on HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially on wide floor plates – warranty claims for this are excluded. Tyres 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940, ramp length 3,570 mm required). 1 piece plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg payload with evenly distributed load), mounted: on the chassis frame on the right in direction of travel. 1 pair of aluminium loading ramps without wheel channel (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg/piece. Two-step access in front of the front wall, left side in direction of travel (hot-dip galvanized). Connecting lines extended for agricultural and forestry towing vehicles. Lasdpfxjvy Tvts Ahkja Further information New: No

Stanje: novo, največja dovoljena obremenitev: 8.770 kg, Leto izdelave: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with Many Extra Features Equipment: - 2 spring-assisted lifts for 400mm high steel side walls - Reinforced and certified superstructure according to EN 12642 XL load securing certificate - 10 UVV lashing hoops in the existing perforated pattern in the outer frame - Additional clamped wooden floor - 235/75R17.5 tyres - 4 BPW axles instead of GIGANT - Platform extension by 870 mm to a total of 6,270 mm - One-piece ramps with hot-dip galvanized anti-slip grating - Lockable toolbox with 45 kg load capacity Paintwork: - Wheels: silver - Chassis / front wall / drawbar / rear wall / stakes / ramps: hot-dip galvanized - Axles / springs: black - Side walls: RAL2011 deep orange Ledpfxjxcxmfo Ahksaa We will be happy to offer you suitable financing, hire purchase, or leasing solutions. Delivery or shipping available by arrangement. We always have a selection of new equipment in stock and demo units available. Feel free to contact us! We rent vehicles with or without drivers, as well as machinery. A wide range of used machines and equipment always available. Subject to technical modifications, errors, and prior sale.

Stanje: rabljeno, največja dovoljena obremenitev: 7.950 kg, skupna masa: 11.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2010, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Skupna teža: 11.000 kg Lastna teža: 3.050 kg Nosilnost: 7.950 kg Skupna dolžina: 8.100 mm Nakladalna dolžina: skupno cca 6.000 mm Širina: 2.550 mm / nakladalna širina cca 2.470 mm Nakladalna višina: 900 mm Dodatne informacije - po višini nastavljiva vlečna ojnica - podporna noga - stranske stene 400 mm, vzmetene - električno kolo - BPW osi Laedpfxsx E I Utj Ahkea - rešetkaste klančine z vzmetjo, bočno pomične - plezalne letve, zadnja podpora - velik pritrdilni paket

Stanje: rabljeno, največja dovoljena obremenitev: 10.100 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 03/2001, naslednji pregled (TÜV): 11/2025, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.550 mm, Skupna teža: 13.500 kg Lastna teža: 3.400 kg Nosilnost: 10.100 kg Skupna dolžina: 8.100 mm Nakladalna dolžina: 6.000 mm Širina: skupna širina 2.550 mm / širina kesona 2.460 mm Višina nakladanja: ca. 1.000 mm Dodatne informacije - Pnevmatske gume: 285/70R19,5 Laodpfjw Nu I Tox Ahksa - Stranske stene 400 mm, 1x deljene

Stanje: rabljeno, prevoženi kilometri: 1.100 km, vrsta prenosa: drugo, barva: rumena, skupna masa: 32.000 kg, lastna masa: 6.210 kg, največja dovoljena obremenitev: 25.790 kg, velikost pnevmatike: 425/65R22.5, prva registracija: 06/2012, naslednji pregled (TÜV): 03/2023, vzmetenje: zrak, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, air suspension, first axle liftable, ABS (anti-lock braking system), side under-run protection Body: LIEBHERR concrete mixer type HTM 1004, approx. 10 m³, 2x BPW axles, disc brakes, first axle liftable! Lajdpfx Ahei Rk Epjkja ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stanje: rabljeno, lastna masa: 8.680 kg, največja dovoljena obremenitev: 31.320 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2018, vzmetenje: drugo, velikost pnevmatike: 235/75R17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5, velikost zadnje pnevmatike: 235/75R17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Privezne ušesca, ABS, razširitev z opozorilnimi tablami, vozilo se prodaja po naročilu., -- Pridržujemo si pravico do tiskarskih napak, sprememb in napačnih podatkov, vzorčne slike --, Več podatkov na: !, More Details: ! Lasdpfxjyy I Uve Ahkja

Stanje: rabljeno, prevoženi kilometri: 464.701 km, moč: 96 kW (130,52 KM), vrsta goriva: dizel, gorivo: dizel, emisijski razred: Euro 3, Leto izdelave: 2005, Oprema: ABS, spojka prikolice, Prostornina motorja: 4249 Mercedes Benz Atego 818 K Tristrani kiper Ročni menjalnik Euro 3 / listnato vzmetenje Skupna masa: 7.490 kg Kiparska nadgradnja Müller Mitteltal Tehnični pregled do 12/2026 Ljdoyx If Ejpfx Ahkoaa Interna številka: 26L ESP Servo volan Zadnja dvigalna ploščad = Dodatne informacije = Lastna masa: 4.470 kg Nosilnost: 3.020 kg Skupna dovoljena masa: 7.490 kg

Stanje: rabljeno, prva registracija: 01/2008, lastna masa: 3.160 kg, največja dovoljena obremenitev: 6.830 kg, skupna masa: 9.990 kg, naslednji pregled (TÜV): 11/2027, barva: srebrn, vrsta prenosa: mehanski, vzmetenje: zrak, Lesena tla, kesonska prikolica Prva registracija: 02.01.2008 cca. 7,28 m x 2,48 m Nakladalna površina 600 mm stranska stena Zračno vzmetenje Lesena tla Nastavljiva vlečna kljuka Prazen masa 3.160 kg Dovoljena skupna masa 9.990 kg ZA NAS JE POMEMBNO STANJE IN OBČUTEK, CENA JE NA DRUGEM MESTU. Za dodatna vprašanja je gospod Faller na voljo na telefonski številki. //*MENJAVA, VZEME V ZAMENO ALI ODPRODAJA VAŠEGA VOZILA, KOT TUDI MOŽNOST FINANCIRANJA! Vse informacije brez garancije* Druge ponudbe najdete na naši spletni strani: Opis in podani podatki niso zavezujoča obljuba in niso zavezujoči. Zavezujoča je kupoprodajna pogodba, ki se sklepa v salonu pri nakupu vozila. Pridržujemo si pravico do sprememb, napak in vmesne prodaje! Lajdpfxsya Uznj Ahkea

Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2010, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vehicle is being sold on behalf of the customer. Some wooden planks are damaged. Equipped with 17 pairs of lashing rings. Loading height approx. 900 mm. -- Subject to typographical errors, mistakes, and modifications. Sample images used. More data available at: !, More Details: ! Lajdpfsy Etl Rsx Ahkja

Stanje: rabljeno, lastna masa: 9.130 kg, največja dovoljena obremenitev: 38.870 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2023, naslednji pregled (TÜV): 10/2026, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, 2 x kontejnerske zapore, pritrdilna ušesa, -- Pridržujemo si pravico do tiskarskih napak, napak ter sprememb, slikovni material je simboličen --, Več podatkov na: !, Več podrobnosti: ! Lajdpfxsy Eicxe Ahkja

Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2010, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vehicle is being sold on behalf of the customer. Some wooden planks are damaged. Equipped with 17 pairs of lashing rings. Loading height approx. 900 mm. -- Subject to typographical errors, mistakes, and modifications. Sample images used. More data available at: !, More Details: ! Ljdpeyy I U Nsfx Ahksaa

Stanje: rabljeno, lastna masa: 3.110 kg, največja dovoljena obremenitev: 9.490 kg, skupna masa: 12.600 kg, konfiguracija osi: 2 osi, prva registracija: 05/2016, naslednji pregled (TÜV): 02/2025, dolžina tovornega prostora: 4.550 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 600 mm, vzmetenje: jeklo, velikost pnevmatike: 285/70R19.5, barva: modra, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, steel body, 2 axles, turntable trailer, leaf suspension, ABS (anti-lock braking system), lashing eyes, storage box, pendulum flaps. Body: 2-axle 3-way tipper trailer, Gigant axles, drum brakes, hot-dip galvanized frame! Laedpfx Ajwth Iiehksa Loading height approx. 1290 mm! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors excepted!

Stanje: rabljeno, lastna masa: 9.300 kg, največja dovoljena obremenitev: 14.700 kg, prva registracija: 02/2001, naslednji pregled (TÜV): 10/2024, skupna širina: 25.500 mm, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17.5 / 10mm, velikost sprednje pnevmatike: 235 / 75 R 17.5 / 10mm, obratovalna teža: 24.000 kg,