Müller-Mitteltal Müller Schneepflüge Breit 3.60 M nakup rabljenega (42.811)

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lower system and RtR-valve * Smart Board installed on trailer as information tool (axle load display - separate for front and rear) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side underrun protection * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Contour tape on sides and rear, reflective * 15-pin power plug * LED lighting 12 / 24 V * LED beacon (removable) at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder coated, side right * Compartment in rotary frame for accessories with folding lid, 2 pcs. container locks permanently installed (directly after turntable platform) * ROBOT welded anti-slip coating on the steel plate of the rotary frame platform (protruding weld seams) * Load securing package consisting of: 2 lashing rings (13.4 t) at front left & right on front wall bearer, front & rear 1 pair of UVV lashing rings (13.4 t), and on each side 3 pairs of UVV lashing rings (10 t) pivotable and lowerable, loadable in all directions and embedded in the outer frame, each side with 3 stake pockets with simultaneous 2 t lashing option * 6 pairs mechanical folding outriggers for 3 m total width (not in the rear taper) * Extension boards stored in the middle of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm storage over rear axle, continuous to end crossmember (total length approx. 2,100 mm) Ksdotplwiopfx Ahkslr * 2 pairs of lashing rings LC 6400 daN in excavator arm storage at side in longitudinal frame * 2 steps galvanized at rotary frame left + right * Profifix lashing strip centered in longitudinal axis, in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and drive-on ramps hot-dip galvanized * Axles, slewing ring, air tank, tow bar painted in black tone * Loading edge loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer warranty * Errors and intermediate sale excepted * Available approx. from week 22/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs, 110 mm wide, with tandem equalizer unit * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Side underrun protection * Plastic quarter mudguards Klsdsl Th Hwepfx Ahker * 15-pin electrical connector * LED tail lights * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal front wall * Side walls made of trapezoidal profiled steel sheet, foldable with board spring lifter * Steel rear wall, insertable between the ramps (holder for unused panel inside the front wall) * Bolted rear stanchions * Outer frame perforated and angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Possible installation of 3 t recessed lashing rings every 600 mm * In each corner front and rear: 1 x 10 t lashing ring; various holes in the front and end crossmembers for 1.2 t lashing options * Profifix lashing rail centrally along longitudinal axis for lashing up to LC 3,000 daN * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (collapsible to 20 mm) * Rear approach slope approx. 860 mm * Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized * Side boards painted RAL 9010 pure white * Side wall painting in a RAL color available at extra charge * Axles, springs, air tank, flange towing eye, and landing gear painted in black * New vehicle with full manufacturer warranty * Errors and prior sale excepted * Available approx. from calendar week 21/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 profile 30.0: * EBS brake system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders Kedel Thxdjpfx Ahkelr * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle load equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Closed plastic mudguards on the front axle and straight galvanized steel fenders at the rear axle, each with spray protection * Reflective contour marking tape on the sides and rear * Foldable lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin power plug * Four stake pockets on each side (however, no stakes included) with simultaneous lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and integrated into the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear taper) * Widening planks stored in the middle of the loading area * Excavator boom rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator boom rest) * One-piece hydraulic ramps (approx. 3,000 x 720 mm) * 4-way control block for subsequent retrofitting of hydraulic ramp shift * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technical GVW of 30,000 kg possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from week 18/2026

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering function, including raising/lowering (RtR) valve * Smart-board infotool mounted on trailer (for separate axle load display front/rear) * Tire pressure monitoring with display option in the truck via EBS signal—no installation required on the truck side * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning sign packages front and rear * Front plastic quarter mudguards with splash guards * Rear straight galvanized steel skirts with splash guards * Reflective contour tape on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar, 1,200 mm long with 40 mm towing eye, height adjustable via drawbar spring & turnbuckle * Tool box made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted on right side * Box in turntable for accessories with folding lid, 2 container locks permanently installed (directly behind the turntable platform) * Robot-welded anti-slip coating on the steel plate of the turntable platform (projecting weld beads) * Load securing package consisting of: 2 lashing rings (13.4 t) front left & right on bulkhead support, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs UVV lashing rings (10 t) on each side, swiveling and lowerable, loadable in all directions and recessed into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing capability * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear slope) * Widening boards stored in the center of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically side-adjustable * 4-way control block for future retrofitting of hydraulic ramp shift * Excavator arm storage above rear axle, continuous up to end cross member (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6,400 daN in the excavator arm storage, mounted on the side in the longitudinal frame * 2 galvanized steps on turntable left & right * Profifix lashing rail along the longitudinal axis in the center, on flat area, lashing capacity up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and drive-on ramps hot-dip galvanized * Axles, turntable ring, air reservoirs, towing fork painted black Klodpjxptn Rofx Ahkor * Loading edge height approx. 910 mm +/- 20 mm (depending on air suspension) * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available approx. from week 22/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel packages front & rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox located on the turntable platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm – black powder-coated – mounted to the side under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon (rotating warning light) at rear * Drawbar scissors with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 4 stake pockets per side (stakes not included), with integrated lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV folding and lowering lashing rings * Loadable in all directions and recessed into the external frame; corner loads up to 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not at the rear taper) * Extension boards stored in a compartment under the loading area * Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the digger stick rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves, hydraulically adjustable lateral ramp shift * Hydraulic flow divider in the trailer (suitable for truck hydraulic pump outputs over 40 ltr. up to max. 140 ltr./min), two-circuit hydraulics Kledpfx Ajtplwfohkor * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height approx. 860 mm +/- 30 mm adjustment unit * Chassis, turntable, fold-out outriggers, rear drop legs and drive-on ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted in black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from CW 19/2026

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs (110 mm wide) with tandem equalizing unit * Drawbar with 50 mm flanged tow eye and height-adjustable drawbar * Jost landing gear at the front * Rear external folding supports * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Sidewalls made of trapezoidal-profiled steel sheet, foldable with drop-side spring lifting device * Steel rear wall, can be inserted between the ramps (storage bracket inside front bulkhead when not in use) * Bolted rear stanchions * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * In each front and rear corner 1 x 10 t lashing ring; various holes in the front and rear crossmember for 1.2 t lashing options * Profifix lashing rail mounted centrally along longitudinal axis, lashing capacity up to LC 3000 daN * One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm) * Rear drive-on slope approx. 860 mm * Chassis, drawbar, bulkhead, rear wall, ramps, and folding supports hot-dip galvanized * Platform sidewalls painted in RAL 9010 pure white * Sidewalls can be painted in any RAL color at extra cost * Axles, springs, air tank, flanged tow eye and landing gear painted black * New vehicle with full manufacturer’s warranty Klsdjl Th Hlepfx Ahkor * Errors and prior sale excepted * Available approx. from week 21/2026 * Example images

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: enclosed plastic mudguards; rear axle: straight galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Foldable galvanized lid for tool box on turntable platform * Multi-voltage system * LED tail lights * Removable beacon at rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin power socket * Four stake pockets per side (stakes not included), each suitable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV folding and lowerable lashing rings (loadable in all directions and recessed in external frame – in corners 13.4 t, otherwise 10 t) * 6 pairs of mechanical folding outriggers for up to 3 m total width (not in rear taper) * Widening planks stored in the center of the loading platform * Digger arm support over rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings laterally in the digger arm support) * Single-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * 4-section valve block for retrofitting hydraulic ramp lateral adjustment * Mechanical lateral ramp shift * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm Klodpfxjl Th Ado Ahkjr * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Gross weight of 30,000 kg technically feasible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from CW 18/2026

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering function ----Drawbar: * Drawbar 1,800 mm long with 40 mm eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in truck dashboard via EBS signal – no truck-side installation required * 15-pin electrical connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Fittings: * Aluminium air tank * Stainless steel toolbox, approx. 1,000 x 300 x 600 mm, mounted on the side * Side underrun protection * Plastic quarter mudguards * Underrun protection ----Flatbed: * Zurr-fix outer frame, 45° edged with hole pattern for lashings, lashing capacity per lashing point 2,000 kg at a distance of 480 mm * Optional installation of 3,000 kg drop lashing brackets at approx. 600 mm intervals – delivery includes 12 pieces of 3,000 kg lashing brackets per side * Five pockets per side for stakes, 100 x 50 mm, integrated into the outer frame (stakes not included) * 30 mm phenolic plywood flooring ----Cable Drum Supports: * 3 galvanized cable drum supports secured via container locks with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between carrier arms approx. 1,775 mm, with cross connection Kjdpfx Ahox Nli Nokelr * Max. cable drum weight per support: 6,000 kg * Without drive and drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 locking rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the carrier arms for customer-side securing of the drum against turning and unspooling ----Loading Height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, bogie, drawbar, outer frame, underrun guard hot-dip galvanized * Axles painted in black finish ----Information: * Technical upgrade to 30 t GVWR possible * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available from CW 28/2026

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option via EBS signal in the truck cabin – no installation required on the truck side * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Fittings: * Aluminum air reservoir * Stainless steel tool box, approx. 1,000 x 300 x 600 mm, mounted on the side * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, drilled for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – 12 pcs 3,000 kg lashing rings per side included * 5 pockets per side for pipe stakes (100 x 50 mm) in the outer frame (stakes not included) * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanized drum supports, secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with transverse brace * Maximum drum weight per support 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends Kledpfx Ahex Nlkajkjr * 2 collar rings * 2 centering cones made of polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided drum securing against turning and unspooling ----Loading height: * Approx. 1,040 mm when loaded ----Coating: * Chassis, bogie, drawbar, outer frame, rear under-run protection hot-dip galvanized * Axles painted in a black shade

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 Cable Drum Supports ----Brakes: * Wabco TEBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5-inch air suspension with lift/lower control ----Tow Bar: * Tow bar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display integration via truck EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tanks * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Side underride guard * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame, 45° angled, with perforated pattern for lashing devices; lashing capacity per point 2,000 kg at 480 mm spacing * Installation of 3,000 kg drop lashing rings at approx. 600 mm spacing possible – 12 pcs. 3,000 kg lashing rings per side included in delivery * 5 pockets per side for stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic plywood floor Kljdpfx Ahsx Nlkgsksr ----Drum Supports: * 3 galvanized drum supports, secured by container locks, with side forklift pockets (center/center 800 mm, pocket width 185 mm) * Max. drum diameter 2,600 mm, max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross member * Max. drum weight per support: 6,000 kg * Without drive and drum brake * Support arm with clamping lock for securing drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 set collars * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on support arms for customer-side securing of drum against rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Finish: * Chassis, turntable, tow bar, outer frame, underrun protection hot-dip galvanized * Axles painted black ----Info: * Upgrading to 30 t GVWR technically possible * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available from week 28 / 2026

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring actuators * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower system plus RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an infotool with pressure sensors to display total axle load * 15-pin power connector * LED lighting system 12/24V * Removable LED beacon at the rear left ----General fittings: * Side underrun protection * Landing gears at the front and mechanical swiveling supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted on the right side under the chassis ----Low-loader platform: Kljdpfxopk D I Ao Ahkjr * Saddle platform with 45° chamfered front corners and front tool box made of galvanized sheet steel (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high, foldable and removable aluminum side boards (RAL 9010 pure white) on the saddle platform * Rear wall -150 mm- plugged in at the back * Rear slope on the saddle platform to the low-bed approx. 700 mm long * Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks * Tread plate above the axles ----Extensions: * 8 x mechanical folding extensions up to 3 m overall width, but not in the rear slope (extension planks available with storage on the saddle platform) * Mechanically adjustable warning sign packages at the front and rear ----Load securing (Lashing package): * On the saddle platform, 2 x 6.3 t lashing points each as well as 3 x 5 t lashing bars on each side of the outer frame * On the low-bed platform, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame * 2 x 6.4 t lashing eyes on each side as well as 1 lashing point in the excavator stick recess at the rear * 2 x container locks directly after the gooseneck on the low-bed platform ----Excavator stick recess: * Excavator stick recess from the end of the last rigid axle via the steering axle to the rear cross member, continuous with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Drive-on ramps: * Mechanical one-piece hot-dip galvanized hydraulic drive-on ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer-side retrofit of hydraulic ramp adjustment * The outer slat of the drive-on ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-up slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck between 40 and 120 l/min) ----Loading dimensions: * Loading area saddle platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm drive-on slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, drive-on ramps, rear folding supports, extension brackets hot-dip galvanized * Axles, landing gears, air tanks painted in a black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample images may include equipment not matching the offered vehicle ----Delivery time: * Available

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system and Ride-on-Road (RtR) valve ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an information tool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Attachments: * Lateral underrun protection * Landing legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder underneath the chassis, right side ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and front toolbox made from galvanized sheet steel, B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminum side walls (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear end wall -150 mm- inserted high * Rear slope on the fifth wheel platform to the low bed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks and low loader deck with 60 mm wooden planks * Checker plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m, not on the rear slope (extension planks available and stowed on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings per side, and 3 x 5 t lashing bars on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t swivel-mounted and retractable lashing rings recessed in the outer frame * 2 x 6.4 t lashing eyes per side, and 1 lashing ring at the rear in the excavator stick recess * 2 x container locks immediately after the gooseneck on the low-bed platform ----Excavator Stick Recess: * Excavator stick recess from the end of the last rigid axle, over the steering axle, to the end cross member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanically single-piece, fully hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer-side retrofitting of hydraulically movable ramps * The outer board of the access ramp is made of 50 mm hardwood * Climbing bars on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump flows from 40 l to 120 l/min) ----Loading Dimensions: Kljdpjl Tnvgsfx Ahkor * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm slope) ----Coupling Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, access ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may show equipment not included in the offered vehicle ----Delivery Time: * Available from c

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: Kodpfx Ahspk D Awskelr ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets, made of galvanised sheet steel (W: 960 mm x H: 300 x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear crash protection buffers * Mechanical rear support legs ----Container / Low-loader Platform: * Hot-dip galvanised main frame with raised outer frame (approx. 25 mm raised) to guide rolling containers * Steel floor with roll recesses in the bogie area * For roll-off container transport: container lengths from 5,500 – 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanically insertable end stops at the front of the guide tracks * Load securing certificate to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * 8 repositionable skip stops for lateral centring of the skips, front 4 skip stops inserted with pendulum stops ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements to secure skips in both friction-fit and positive-locking manner * 4 lashing bars in cloverleaf design (on sides) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Welded anti-slip strip in the running area of the ramp incline * 1 pair aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Finish: * Side and rear reflective contour marking * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanised main frame ----Info: * Technical gross weight of up to 27,000 kg possible * New vehicle without initial registration, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 20/2026

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Centre axle liftable Kledpepk D Iiofx Ahker ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets, made of galvanised sheet steel (W: 960 mm x H: 300 x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear crash protection buffers * Mechanical rear support legs ----Container / Low-loader Platform: * Hot-dip galvanised main frame with raised outer frame (approx. 25 mm raised) to guide rolling containers * Steel floor with roll recesses in the bogie area * For roll-off container transport: container lengths from 5,500 – 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanically insertable end stops at the front of the guide tracks * Load securing certificate to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * 8 repositionable skip stops for lateral centring of the skips, front 4 skip stops inserted with pendulum stops ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements to secure skips in both friction-fit and positive-locking manner * 4 lashing bars in cloverleaf design (on sides) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Welded anti-slip strip in the running area of the ramp incline * 1 pair aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Finish: * Side and rear reflective contour marking * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanised main frame ----Info: * Technical gross weight of up to 27,000 kg possible * New vehicle without initial registration, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 20/2026

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Brake System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lift and lower facility ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required) * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Provision for retrofitting 20" container locks at front and rear * Bolted bulkhead made of smooth sheet steel * Fold-down side walls, trapezoidal profile, with drop-side spring assists * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Each of the front and rear corners fitted with 1 x 6.3 t lashing ring * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Vehicle fully hot-dip galvanized ----Information: Kodpfx Ahepk D Dqjkslr * New vehicle with manufacturer’s warranty * Subject to error and prior sale ----Delivery Time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Braking System: * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Towing Eye: * Drawbar height-adjustable by 300 mm * 40 mm flange towing eye ----Electrics / Lighting: * TPMS (tire pressure monitoring system with indicator function in the truck via EBS signal—no installation required on the truck side) * LED lighting system * 15-pin electrical connector ----General Accessories: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floorboards * Preparation for subsequent installation of 20" container locks at front and rear * Bolted, smooth sheet metal front wall * Side walls made of trapezoidal-profiled steel, foldable with drop-side spring assist * Hot-dip galvanized bolt-on rear stanchions Kodpfx Ahondpn Sskslr ----Load Securing: * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing points every 480 mm * Option for 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and end crossmembers for 1.2 t securing points ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, stored in a compartment underneath the loading area in the chassis, accessible from the rear ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Entire vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf

Stanje: rabljeno, prva registracija: 11/2006, Leto izdelave: 2006, MÜLLER - MITTELTAL T4 Kompakt Vrtljiva prikolica - Nizkopodna prikolica z zračno vzmetenimi in jamskimi kolesi Kjdpowmpbdsfx Ahkolr - 4 x zračno vzmetene GIGANT - osi - zračno vzmetenje - 4 x kolesne jame - mehanske nakladalne rampe - 2 zadnja podporna noga, zložljiva - izvlečne opozorilne table - ABS - MICHELIN pnevmatike: 235/75 R 17.5 - težka izvedba: 40.000 kg skupne mase - lastna teža: 8.400 kg - skupna dolžina: 11.750 mm - vlečna zanka: 50 mm Posebej primerna za prevoz strojev za rezanje apna! - nemška prikolica - Tehnični pregled / tehnični preizkus možen na zahtevo in za doplačilo! Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: rabljeno, številka stroja/vozila: 110, lastna masa: 8.320 kg, največja dovoljena obremenitev: 31.680 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2008, dolžina tovornega prostora: 10.300 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5, medosna razdalja: 6.500 mm, barva: modra, Oprema: ABS, * Drum brake * 4 axles * Wheelbase 6,500 mm * Hydraulic ramp length 2,850 mm – width 650 mm * Loading edge height 920 mm * Extendable to 3 m Subject to errors and omissions Kjdpfolpav Uox Ahkelr

Stanje: rabljeno, lastna masa: 7.800 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2006, naslednji pregled (TÜV): 05/2026, dolžina tovornega prostora: 9.100 mm, širina tovornega prostora: 2.750 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, barva: siv, Oprema: ABS, Bobnasta zavora Nosilnost 22.200 kg Gumijasta tla Hidravlične dvojne rampe in hidravlični pomik Gigant osi Ksdpfx Aewh Rwvjhkslr Pridržujemo si pravico do napak

Stanje: rabljeno, največja dovoljena obremenitev: 4.500 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 07/1979, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.900 mm, višina nakladalnega prostora: 380 mm, skupna širina: 2.500 mm, skupna višina: 3.000 mm, Leto izdelave: 1979,

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axle: * 2 x SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm ride height via actuating cylinder * Start-assist for maneuvering and forced lowering onto the first axle, controlled via speed-dependent EBS-E electronics (no installation required on the truck side, additionally with cable for control from the tractor) Klsdpfx Ajyfy Rrshker ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Eye: * 50 mm flange bolt towing eye - height adjustable by +77 mm and -33 mm - for 2 t support load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, controlled via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connector cables for agricultural and forestry vehicles * Radio remote power supply 12+24V via tail lamp ----General Attachments: * BPW landing gear at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminum rims * Removable pin-type towing coupling (use permitted only when underrun protection is retracted) * Closed plastic half-shell single mudguards * Two-step access in front of the front wall on the left * Shovel and broom holder in front of the front wall * 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, located on the right side * Closed side underrun protection usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine side, from truck/tractor), designed for 180 bar (for tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right front) with operation via radio remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift unit (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift control via radio remote control * Radio control with fast-lowering only during unloading, not during lifting * Emergency stop switches on both left and right sides * Container bearing with 4 supports on each side and 1 roller each at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist main boom lifting * 2 x mechanical drop-down supports at the rear * Certified for 20 t gross weight (2 x 9 t axles) and 2 t nose weight * Note: If the radio control is outside the charging cradle, the service brake must be applied in order to enable the remote operation. Brake couplings must always be connected to allow the hydraulic/pneumatic valves to open * Monitoring system for underrun protection to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lift axle lowered ----Finish: * Chassis, drawbar, access step, underrun protection, and drop-down supports hot-dip galvanized * Axles, air reservoir, and landing gear at the front painted black * Palfinger hooklift painted in black/yellow ----Information: * Errors and prior sale excepted * Vehicle is in very good / as-new condition ----Container Dimensions: * Load compartment length: 5,500 mm * Load compartment width: 2,300 mm * Load compartment height: 1,000 mm Information: * Mounting fittings for hook systems available

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release system for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axles: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with ride height +30 mm via positioning cylinder * Starting aid for shunting and mandatory lowering on the first axle – controlled via speed-dependent EBS electronics (no installation required on the truck; also with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via radio remote control ----Drawbar / Flange Drawbar Eye: * 50 mm flange-mounted drawbar eye, height-adjustable by +77 mm and -33 mm, for 2 t support load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, switched via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connecting cables for agricultural and forestry vehicles * Power supply for radio remote: 12+24 V via taillight ----General Attachments: * BPW landing leg at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium wheels * Split-pin towing coupling (use only with retracted underrun protection) Kodpfox Dp Atox Ahkelr * Enclosed plastic half-shell single mudguards * Two-step access before the front bulkhead on the left side * Shovel and broom holders in front of the front bulkhead * 2 matte stainless steel toolboxes, approx. 650 x 350 x 320 mm, mounted right side * Enclosed side protection usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine end from truck/tractor), rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted front right), operated via radio remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hook system (Serial no. 100746129, year 2023) * Base frame made of high-strength fine-grained steel * 20,000 kg pulling force * Hook height 1,570 mm * Control of hooklift via radio remote control * Remote control with rapid function when lowering, not when raising * Emergency stop switches left and right sides * Container supports with 4 lateral supports per side and one roller at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist in lifting the main arm * 2 x mechanical fall supports at the rear * Approval for 20 t gross vehicle weight (2 x 9 t axles) and 2 t support load * Note: If the radio remote is outside the charging cradle, the service brake must be applied for radio release. Brake connections must remain connected at all times so the hydraulically/pneumatically operated valves can be opened. * Monitoring system for underrun protection to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and fall supports hot-dip galvanized * Axles, air tanks, front landing gear painted black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale reserved * Vehicle is in very good / as-new condition ----Delivery time: * Vehicle is immediately available

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with driving height +30 mm via positioning cylinder * Traction aid for shunting purposes and forced lowering onto the first axle – controlled via speed-dependent EBS electronics (no installation required on truck side, additionally supplied with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via radio remote control ----Drawbar / Flange Eye: * 50 mm flange screw drawbar eye – height adjustable by +77 mm and -33 mm – for 2 ton support load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lamps activated by reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * Extended connection cables for agricultural and forestry vehicles Kljdox Dp Agspfx Ahkor * Power supply for radio control 12+24V via tail light ----General Attachments: * BPW landing gear at the front * Mechanical, extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-cut aluminium wheels * Pin-type towing coupling (use only when underrun protection is retracted) * Closed plastic half-shell individual mudguards * Two-step access in front of the front bulkhead on the left * Shovel and broom holder in front of the front bulkhead * 2 matt stainless steel toolboxes, approx. 650 x 350 x 320 mm, right side mounted * Closed side underrun protection can be used as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic rear door (mounted front right) operated via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg tractive force * Hook height 1,570 mm * Hooklift operated via radio remote control * Radio remote control with fast function during tipping, but not during winching * Emergency stop switches on both left and right sides * Container bed with 4 side supports each and one roll at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist with raising the main arm * 2 x mechanical folding rear supports * Approval for 20 ton gross weight (2 x 9 ton axles) and 2 ton support load * Note: If the radio control is outside the charging cradle, the service brake must be engaged to enable remote operation. Brake connections must remain connected at all times to operate the hydraulic/pneumatic control valves. * Monitoring system for underrun protection to ensure it is retracted while tipping ----Loading Height: * Unladen approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, access steps, underrun guard, and folding supports hot-dip galvanized * Axles, air tanks, and front landing gear painted in black * Palfinger hooklift painted in black/yellow ----Information: * Subject to errors and prior sale * Vehicle in very good / like-new condition ----Delivery Time: * Vehicle immediately available

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0 ----Braking System: Klodpjx Dp Amjfx Ahker * Wabco EBS-E electronic braking system * Emergency release device for spring-actuated cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x 9 t SAF axles * 1st axle as a lift axle (fully automatic) * Lift axle with +30 mm ride height via actuating cylinder * Start assist function for maneuvering and forced lowering on the first axle - controlled via speed-dependent EBS electronics (no truck-side installation required, additionally equipped with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Eye: * 50 mm flanged drawbar eye – height adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights operated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * Extended connection cables for agricultural and forestry vehicles * Wireless power supply 12+24 V via tail light ----General Add-on Parts: * BPW support winch at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminum rims * Pin-type towing coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell individual mudguards * Two-step access in front of the front wall on the left * Shovel and broom holder in front of the front wall * 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm mounted on the right side * Enclosed side impact protection can be used as advertising space ----Hydraulics: * Dual-circuit hydraulic connections (engine side from truck / tractor) rated for 180 bar (for tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted on the right in the front area), operated via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift unit (Serial No. 100746129, year 2023) * Main frame made of high-strength fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift operation via remote control * Remote control with fast function when lowering, but not when raising * Emergency stop switch on both left and right sides * Container support with 4 supports each side and 1 roller each rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to support lifting of the main arm * 2 x mechanical fall supports at the rear * Approval for 20 t total weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is removed from the docking station, the service brake must be engaged to activate the radio control. Brake connections must remain permanently connected to operate the hydraulic/pneumatic valves * Monitoring system for underrun protection to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, step, underrun protection, and fall supports hot-dip galvanized * Axles, air tanks, and front support winch painted black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale excepted * Vehicle is in very good / as-new condition ----Container Dimensions: * Load length: 5,500 mm * Load width: 2,300 mm * Load height: 1,000 mm Info: * Mounting brackets for hook systems according to ...

Stanje: rabljeno, lastna masa: 4.500 kg, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2015, naslednji pregled (TÜV): 07/2025, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 1.000 mm, barva: modra, Leto izdelave: 2015, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, * German trailer * Condition as shown in photos * Müller-Mitteltal three-way tipper, model KA-TA-R 18.0 tandem * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp * Air suspension * Disc brakes * Platform * Jost landing gear * Payload: 13,500 kg If a new TÜV inspection is required, we are happy to offer this through our partner workshops. Ksdpfx Ahjwz H Nbjkolr Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods, to avoid any misunderstandings regarding their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All details are without guarantee. We do not assume liability for errors or incorrect information in the listing. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.