Prikolica z nizko platformo

MÜLLER-MITTELTAL T3 Tiefl., verz., Baggerstiel, hydr. Klapprampen

Stanje: novo, največja dovoljena obremenitev: 23.210 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * Zavorni sistem EBS * Naprava za sprostitev v sili za cilindere vzmetnih akumulatorjev * Bobnaste zavore * 3 x 11 ton osi BPW Eco * Listne vzmeti * mehanski izravnalnik osi na zadnji strani * bočni zaščitni element * vrtljiva oporna noga na zadnji strani šasije * mehansko nastavljivi paketi opozorilnih plošč spredaj in zadaj * sprednji plastični blatniki in zadnji ravni, pocinkani jekleni odbijači, oba s ščitnikom proti brizganju * odsevni konturni trak na boku in zadnji strani * zložljivi pokrov (vroče pocinkan) za orodjarno v platformi vrtljivega podvozja * orodjarna iz pocinkane jeklene pločevine, približno 650 x 300 x 600 mm – črna, prašno lakirana – na boku pod šasijo * 15-polni vtič * LED-osvetlitev 12 / 24 V * LED-okrogla luč (odstranljiva) na zadnji strani * vlečna palica s 40 mm vlečnim ušesom in nastavitvijo višine s pomočjo vzmetne palice in napenjalnega mehanizma * na vsaki strani 4 žepe za pritrditev (vendar nobene pritrdilne palice), ki omogočajo sočasno pritrditev * paket La-Si, ki vključuje: 2 pritrdilni točki (6,4 tone) spredaj na levi in desni strani na glavnem okvirju platforme vrtljivega podvozja * 5 parov UVV pritrdilnih obročev, ki se lahko vrtijo in spuščajo * obremenitev v vseh smereh in vgrajeni v zunanji okvir, v kotih 13,4 tone, sicer 10 ton * 6 parov mehanskih zložljivih nosilcev za 3 metre skupne širine (vendar ne na zadnji poševnici) * podaljševalne deske pod tovorno površino, shranjene v odlagalnem prostoru * nosilec za bager na zadnji strani, do nosilne palice, približno 2.100 mm dolg (2 para pritrdilnih obročev 6,4 tone na boku nosilca za bager) Gjdpoq Dyv Iofx Alfsui * hidravlične zložljive rampe (približno 4.650 x 720 mm) s hidravlično nastavljivim končnim delom in ventilom za zadrževanje tovora, hidravlično stransko premikanje ramp * hidravlični razdelilnik pretoka na prikolici (pri hidravlični moči črpalke na tovornjaku, večji od 40 litrov do največ 140 litrov/min), dvojna hidravlična povezava * tovorna površina nad vrtljivim obročem: približno 1.960 x 2.520 mm * zadnja tovorna površina: približno 6.500 x 2.520 mm (vključno s 860 mm poševnico za vožnjo) * višina nakladanja, obremenjeno: približno 860 mm +/- 30 mm, izravnalna enota * šasija, vrtljivi podvozek, zložljivi nosilci, oporne noge na zadnji strani in rampi za vožnjo, vroče pocinkani. * osi, vzmeti, vlečna palica, zračni rezervoar itd., črno lakirani. * Novo vozilo z garancijo proizvajalca * Pridržana pravica do sprememb in napak. * dobavljivo približno od 50. tedna 2026

Stanje: rabljeno, lastna masa: 11.200 kg, največja dovoljena obremenitev: 36.800 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you receive a current & comprehensive inspection and function report. Gooseneck: - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood floor Extendable loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widened sections in the lower area - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - Incl. 3-piece removable galvanized covers over the wheel recesses (width 670 mm) – max. point load 5 t / pc - Recess in the incline and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of swing-out lashing rings (LC 5,000 daN) - 2 pairs of swing-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator dipper recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting unit, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing self-steer axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock operable via reverse gear and manual activation - Air suspension with raise and lower valve - Axle tools - TPMS tire pressure monitoring system compliant with ECE R 141 - Tires: 235/75 R17.5 3PMSF Accessories included: - Bracket for warning signs on the gooseneck and at the rear, left and right, each with socket - One spare wheel with holder in front of the bulkhead - 2" kingpin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings at the front galvanized connection rail - 4 wheel chocks with holders - Galvanized, extendable width extensions approx. 230 mm per side - Galvanized folding supports under the incline of the loading area - Cover plates to bridge the gap between ramps and loading area - White reflective tape on sides and on extendable section, rear in red, according to EU regulations - Electro-hydraulic unit at the rear, under the loading area - European reflector boards (red-yellow) on the rear of the semi-trailer - Four extendable warning signs, each approx. 423 x 423 mm with position lamp (extend approx. 400 mm) - Bracket for rotating beacon on the warning signs - On the gooseneck, plug-in aluminium side and rear boards approx. 2,440 x 400 mm - Rear, galvanized plug-in stanchions removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container Gsdpfx Alsyyldujfoui - 3 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area incline - Painted sand layer as anti-slip protection on chequer plates on the gooseneck and loading area - Speed sticker 80 km/h on rear and both sides - Load manometer for determining axle loads, including load chart