Prikolica z nizko platformoMÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
Prikolica z nizko platformo
MÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
Stalna cena brez DDV
32.950 €
(39.210 € bruto)
Leto izdelave
2024
Stanje
Novo
Lokacija
Egestorf 

Prikaži slike
Prikaži karto
Osnovni podatki
Cena in lokacija
Stalna cena brez DDV
32.950 €
(39.210 € bruto)
- Lokacija prodajalca:
- Eichenstich 12, 21272 Egestorf, Nemčija

Klic
Tehnične podrobnosti
- Največja dovoljena obremenitev:
- 14.550 kg
- Skupna masa:
- 19.000 kg
- Konfiguracija osi:
- 2 osi
- Dolžina tovornega prostora:
- 6.270 mm
- Širina tovornega prostora:
- 2.470 mm
- Višina nakladalnega prostora:
- 400 mm
Podrobnosti ponudbe
- ID ponudbe:
- A128-69-474
- Št. reference:
- 5954
- Nazadnje posodobljeno:
- dne 10.07.2025
Opis
* ETÜ-TA-R 19.0:
* Wabco EBS-E (electronic braking system)
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension, drawbar with 50 mm flange towing eye and height-adjustable drawbar
* Jost landing gear at front
* Rear external folding supports
* Tool box made of galvanized steel sheet approx. 650 x 350 x 320 mm, mounted laterally on the right (black powder-coated)
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* Reinforcement package for drilling rig transport on chassis – loading height +20 mm
* 50 mm softwood floor, clamped design
* Preparation in front of front wall for retrofitting container locks
* Bolted front wall made of smooth sheet metal
* Side walls made of trapezoidal-profiled steel sheet, foldable with board-side wall spring assist
* Steel rear wall can be slotted in between ramps – bracket for storage inside at front wall when not in use
* Rear stanchions bolted
* Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* In each front and rear corner 1 x 10 t lashing ring, various holes in front and rear crossmembers for 1.2 t lashing points
* One-piece mechanical grating loading ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (retractable up to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, front wall, rear panel, rear folding supports and loading ramps hot-dip galvanized
* Axles, springs, air tanks and landing gear painted in a shade of black
* Wheelbase: 1,310 mm
* Tyres: 235/75R17.5
* Body side walls painted in RAL 9010 pure white
* Side walls can be painted in any RAL color at extra cost
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
Bdodpfopk D Ncsx Ah Esi
* Immediately available from Egestorf
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
* Wabco EBS-E (electronic braking system)
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension, drawbar with 50 mm flange towing eye and height-adjustable drawbar
* Jost landing gear at front
* Rear external folding supports
* Tool box made of galvanized steel sheet approx. 650 x 350 x 320 mm, mounted laterally on the right (black powder-coated)
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* Reinforcement package for drilling rig transport on chassis – loading height +20 mm
* 50 mm softwood floor, clamped design
* Preparation in front of front wall for retrofitting container locks
* Bolted front wall made of smooth sheet metal
* Side walls made of trapezoidal-profiled steel sheet, foldable with board-side wall spring assist
* Steel rear wall can be slotted in between ramps – bracket for storage inside at front wall when not in use
* Rear stanchions bolted
* Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* In each front and rear corner 1 x 10 t lashing ring, various holes in front and rear crossmembers for 1.2 t lashing points
* One-piece mechanical grating loading ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (retractable up to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, front wall, rear panel, rear folding supports and loading ramps hot-dip galvanized
* Axles, springs, air tanks and landing gear painted in a shade of black
* Wheelbase: 1,310 mm
* Tyres: 235/75R17.5
* Body side walls painted in RAL 9010 pure white
* Side walls can be painted in any RAL color at extra cost
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
Bdodpfopk D Ncsx Ah Esi
* Immediately available from Egestorf
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2001
Pošlji zahtevo
Telefon & Faks
+49 40 33... oglasi
Ti oglasi bi vas prav tako lahko zanimali.
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake














































