Müller-Mitteltal 3-Achs Plateau, Luftgefedert, Hydr. Rampen nakup rabljenega (42.217)

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer set ----Drawbar / Flange eye: * Height-adjustable drawbar (300 mm adjustment range) with 40 mm flange eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General attachments: * Jost mechanical landing gear in front * Two mechanical folding supports at the rear Iodpjl Th Dujfx Ahcstl * Plastic toolbox approx. 650 x 350 x 320 mm mounted on the right side at the front of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks located at the central locking mounting points as well as 2 hooks on the front wall ----Chassis: * Chassis fabricated from fine-grain steel ----Tipper body: * Steel pallet three-way tipper body with continuous side walls, upper sections internally reinforced with pipe, no central stanchions, drop-side design with tailgate spring lifters * Rear stanchions bolted * Combination steel wing doors at the rear, double-leaf, asymmetrically divided, can swing open and lock to 270°, not collapsible, fitted with additional pendulum frame for automatic tailgate opening during tipping operation; locking by galvanized rotary bar at the rear and central locking; deactivation for automatic tailgate function when tipping backward with open wing doors * 4 mm fine-grain steel floor plate * Rear mounting rails for loading ramps ----Load securing: * Each corner fitted with one 5 t lashing ring, each side fitted with four 3 t recessed lashing rings in the outer frame ----Ramps: * One pair of aluminum access ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired & tracked vehicles * Rear lockable storage compartment for ramps integrated underneath the load area in the chassis ----Tyres: * Tyres 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, and rear support legs hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted in a shade of black * Side wall paintwork in RAL 9010 pure white * Other RAL color tones for side walls available at extra cost ----Additional Information: * Reinforced body with load securing certificate * Vehicle comes with one-day registration (never used) * Subject to errors and prior sale ----Delivery time: Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical folding supports at rear * Plastic toolbox, approx. 650 x 350 x 320 mm, mounted on the right side of the chassis at the front * Bolted underrun protection * Plastic quarter mudguards * Net hooks positioned at the central locking locations and 2 on the front wall ----Chassis: * High-tensile steel chassis ----Tipping Platform: * Steel pallet-type three-way tipper body with continuous side walls, upper inside pipe reinforcement, no central stanchions; drop-down with drop side spring assistance * Bolt-on rear stanchions * Combination steel swing doors on the rear wall, 2-leaf, asymmetrically split, can swing and lock 270°, not drop-down, with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bolt at the rear and central locking; deactivation for auto rear wall function when tipping backwards with door open * 4 mm fine-grained steel floor plate * Rear mounting rails for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner, plus 4 x 3 t lashing rings on each side recessed into the external frame ----Ramps: * 1 pair of aluminium drive-on ramps, approx. 3,570 x 410 mm (load capacity: 10 t/pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment under the loading platform, integrated into the chassis for the ramps ----Tyres: * Tyres 285/70 R19.5 Itjdsl Th Htjpfx Ahcol ----Painting: * Chassis, drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized * Axles, springs, air tanks and support winch painted black * Drop sides painted RAL 9010 pure white * Other RAL-coloured side wall painting available at extra cost ----Information: * Reinforced body with load securing certificate * Vehicle has a day registration (not previously in use) * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: rabljeno, lastna masa: 6.000 kg, največja dovoljena obremenitev: 33.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2019, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.330 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, barva: črn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 3 osi, SAF osi, zračno vzmetenje, 1. os dvižna, dviganje + spuščanje, ABS (protiblokirni sistem), stranska zaščita, stranska alu zaščita, podporniki, zaboj za orodje, stebri. Iodpfewkvqasx Ahcstl Nadgradnja: 3-osna polprikolica za prevoz lesa s 6 pari Ecco Steel nosilcev stebrov, 3x 9 t SAF osi, kolutne zavore, prva os dvižna, zamenljiv 2" kraljevski zatič, višina priklopa neobremenjen pribl. 1150 mm, najmanj 2240 mm prostega sprednjega odmika od sredine priklopnika, lahki okvir iz visoko trdnostnega drobnozrnatega jekla. Višina nakladanja pribl. 1540 mm! Večkrat na zalogi iz stečajne mase! PODATKI O DODATNI OPREMI BREZ GARANCIJE, pridržujemo si pravico do sprememb, vmesne prodaje ali napak!

Stanje: rabljeno, lastna masa: 5.520 kg, največja dovoljena obremenitev: 37.480 kg, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2024, naslednji pregled (TÜV): 12/2026, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5 160K, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55 R22,5 160K, velikost zadnje pnevmatike: 385/55 R22,5 160K, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, 1 x 20 ft ali 2 x 20 ft ali 1 x 40 ft, centralni in zadnji nosilec, agregat Transcool ST 16, generator z močjo do 19,2 kW, motor Kubota Diesel 1703 BG, rezervoar za gorivo 160 litrov, -- napake, spremembe in drugačna interpretacija podatkov pridržane, ilustrativne slike --, več informacij na: !, več podrobnosti: ! Isdpfozzl Hvsx Ahcjtl

Stanje: rabljeno, lastna masa: 9.520 kg, največja dovoljena obremenitev: 38.480 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2020, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5 140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R17,5 140J, velikost zadnje pnevmatike: 235/75 R17,5 140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Lashing eyes, -- Typographical errors, mistakes and changes excepted, sample images --, More data at: !, More details: ! Ijdpfx Ajzzl Itshcetl

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902037031, lastna masa: 4.795 kg, največja dovoljena obremenitev: 30.320 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.040 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 100 odstotek, barva: siv, These images are archive photos! The vehicle may still be in use! Fine-grain steel welded construction in basic lightweight design, fifth wheel plate with interchangeable 2" kingpin, Curved front closure, patented 24-ton, 2-speed landing gear, single-side operation, with semi-circular base and straight mounting plate, with thrust compensation Wheel chocks with holders Foldable underrun protection Half-shell fenders Integrated mudguard bracket, stone-repellent finish With anti-spray mud flaps only on the last axle Tarpaulin rod with bracket Tow hook at rear (not included on Revolution model) Axles & Suspension SAF disc brake axles with 430 mm disc diameter "Laser-measured axles/chassis" reduces tire wear and fuel consumption Axles in off-road version Air suspension 1st axle is an automatic lift axle, including forced lowering and traction aid, operated by "brake 3x" function (traction aid works up to axle overload of 30% and a maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" Brake system 2-line compressed air braking system Color-coded piping for easier maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting hose 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Note: This trailer may only be towed by towing vehicles equipped to ensure proper ABS function! With raise/lower valve Vehicle stability system Automatic tipping lowering with shut-off valve "TPMS" tire pressure monitoring system – display via towing vehicle, through EBS, not installed in truck (prerequisite: required installation in truck; only monitors base tyres) Wheels & Tires 385/65 R22.5" Steel rims Electrics 24 Volts, multi-chamber LED lights, side yellow LED lighting, license plate lighting in LED (Note: for certain towing vehicles, error messages may occur despite fully functioning system) Side yellow LED lighting linked to turn signal ("blinking side marker lights") 2 white front position lights in LED 2 white/red lane marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable Integrated additional LED work light at the rear, switched with reverse light Isdpey Rrpljfx Ahcstl Hydraulics Low-pressure cylinder, max. 170 bar Operation hydraulically via vehicle PTO Body Aluminium box body made of high-grade, abrasion-resistant material. Inclined front wall, 5 mm thick, with external cylinder mounting. Side walls constructed from 30 mm hollow section profiles, neatly welded, with spill-repellent top rail profile. Interior with access steps at front wall (not with Cramaro system). External shovel and broom holders at front wall Greenline – conical, aerodynamic body form "Membrane" tailgate Tailgate as pendulum flap with double-joint hinges, externally mounted, dual hook locking Tailgate with rubber seal Continuous 6 mm thick floor Standing platform with access steps, connector plate for air/electricity/brake with large working space for optimal operability Roll tarpaulin can be stowed on right side, with central locking on the left Operating notes For transport involving salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to protect against material corrosion and rusting.

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated in underrun protection ----General Attachments: * Landing gear at the front * Fold-out support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Plastic quarter mudguards ----Tipper Body: * Steel 3-way tipper body made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall, smooth sheet steel * Hardwood pad for excavator bucket bolted to front wall * Continuous, folding drop sides without central stanchion, with sideboard spring assist and manual central locking system * Screwed-in rear stanchions * Combination steel swing doors, asymmetrical 2-leaf rear wall, can be swung and locked at 270°, not foldable, with additional swinging frame for automatic rear wall opening during tipping, locking via galvanized rotary bar lock and central locking system, deactivation function for automatic rear wall opening when tipping reverse with open swing doors * 4 mm steel floor plate * Two-step entry left front * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Loading Ramps: Isdpfovin T Sox Ahcstl * Integrally mounted ramp storage at the rear of the chassis * 1 pair of aluminum loading ramps (10 t / pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, rear folding supports hot-dip galvanized * Sideboard paintwork in RAL custom color (with exceptions for special or metallic paintwork); can be changed up to approx. 6 weeks prior to delivery * Axles, air tanks, flange drawbar eye, front landing gear painted in black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Brake: * EBS (Electronic Braking System) * Emergency release for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering device, including Ride-Through-Release (RtR) valve and manual lowering function for loading ----Drawbar / Flanged Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flanged drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V fitted in underrun protection ----General Attachments: Itodpfx Ajvin Ucehcol * Support winch at front * Fold-away rear support legs on the outside * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made of high-tensile fine grain steel with high M-Strong side panels and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet steel * Hardwood strip for excavator bucket screwed onto front wall * Continuous side panels – fold-down without center pillar, with sideboard spring-assist lifters and swinging function via manual central locking * Bolt-on rear stanchions * Combination steel swing doors at rear, 2-leaf, asymmetrically split, able to swing open 270° and lockable (not foldable), including additional swinging frame for automatic rear door opening when tipping; locking by galvanized rotating bar lock and central locking, deactivation function for automatic rear door opening when tipping backwards with opened swing doors * 4 mm steel floor plate * Two-step access on the left front * Rear ramp track for loading ramps ----Load Securing: * One 7 t lashing ring in each corner * Four 3 t lashing eyes recessed in the outer frame on each side ----Loading Ramps: * Recessed ramp compartment at rear of chassis * 1 pair aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, and rear supports hot-dip galvanized * Sideboards painted in any desired RAL colour (excluding special or metallic paints), can be changed up to approx. 6 weeks before completion * Axles, air tanks, flanged drawbar eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Errors and intermediate sale reserved ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: rabljeno, prevoženi kilometri: 1.100 km, vrsta prenosa: drugo, barva: rumena, skupna masa: 32.000 kg, lastna masa: 6.210 kg, največja dovoljena obremenitev: 25.790 kg, velikost pnevmatike: 425/65R22.5, prva registracija: 06/2012, vzmetenje: zrak, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, air suspension, first axle liftable, ABS (anti-lock braking system), side under-run protection Iodpfxji Rk Epj Ahcetl Body: LIEBHERR concrete mixer type HTM 1004, approx. 10 m³, 2x BPW axles, disc brakes, first axle liftable! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain Itodpfx Astvfkfjhcol - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: rabljeno, prva registracija: 06/1998, skupna masa: 18.000 kg, lastna masa: 4.200 kg, barva: bež, vrsta prenosa: drugo, emisijski razred: noben, obratovalne ure: 8.640 h, največja dovoljena obremenitev: 13.800 kg, naslednji pregled (TÜV): 09/2026, vzmetenje: jeklo, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.470 mm, velikost pnevmatike: 235/75 R17.5, velikost sprednje pnevmatike: 235/75 R17.5, velikost zadnje pnevmatike: 235/75 R17.5, voznikova kabina: drugo, Oprema: dodatne luči, meglenke, osvetlitev, registracija tovornjaka, zavorni sistem na stisnjen zrak, šasija, Müller Mitteltal, prikolica z 2 osmi (prej kontejner), platforma/ravna prikolica, model TM 2 * Osje SAF * Dvojne pnevmatike * Listne vzmeti * Pnevmatike: 235/75 R17.5 * Odlična globina profila * 2 orodjarni omari na desni strani * Priključek DUO-Matic * 50 mm vlečna kljuka * Stranski oporniki za kontejnerje * Različne pritrdilne točke na straneh * Višina nakladalne platforme: 1,04 m Iodpfjzrh E Aox Ahcjtl * Mere: D – 7,10 m, Š – 2,47 m * Teže: Dovoljena skupna masa – 18.000 kg, Dovoljena masa na osi – 4.200 kg, Nosilnost – 13.800 kg * Nemško vozilo in nemška dokumentacija!! * Prvi lastnik!! * Datum prve registracije: 19.06.1998 * Tehnični pregled veljaven do: 09/2026 * Pregled zavornih sistemov veljaven do: 03/2026 * VIN: WMM00000W0042223 Pridržujemo si pravico do vmesne prodaje, napak in sprememb! Na nekaterih slikah so bila odstranjena logotipa podjetij – prosimo, vprašajte! Funkcionalnost dodatne opreme ni zagotovljena! Vaša kontaktna oseba: Christoph Ott Tel. + WhatsApp:

Stanje: rabljeno, največja dovoljena obremenitev: 29.660 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2021, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna dolžina: 8.420 mm, skupna širina: 2.550 mm, skupna višina: 3.390 mm, Leto izdelave: 2021, Oprema: ABS, * Višina sedla: približno 1270 mm * Zložljiva zaščita pod vozilom * Vlečna kljuka na zadnji strani * Streha Camaro, električni pogon z daljinskim upravljanjem * SAF osi, izvedba za terensko uporabo * Diskovne zavore, premer 430 mm * Zračno vzmetenje * 1. os kot dvižna os (samodejno in dodatno upravljana iz kabine tovornjaka) * Dvižna os s prisilnim spuščanjem in pomočjo pri speljevanju * Polirane aluminijaste platišča * LED osvetlitev * Hidravlični sistem, cilindri za nizek tlak, 170 bar * Zadnja stena z nihajno loputo, ki leži na podlago * Stranska stena, debelina 4 mm, neprekinjena * Talna obloga, debelina 4/5 mm * Barva korita: jekleno siva * Barva okvirja: nova siva * Cinkane oporne noge * Aluminijasta lestev, dolžina 3300 mm, z nosilcem * Metla in lopata, vključno z nosilcem, na prednji steni * SP 06.2027 * itd. Isdpfx Ahozvz Thscstl * Pridržana pravica do sprememb, napak in prodaje medtem.

Stanje: rabljeno, lastna masa: 5.520 kg, največja dovoljena obremenitev: 37.480 kg, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2024, naslednji pregled (TÜV): 12/2026, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5 160K, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55 R22,5 160K, velikost zadnje pnevmatike: 385/55 R22,5 160K, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, 1 x 20 ft ali 2 x 20 ft ali 1 x 40 ft, centralni in zadnji nosilec, agregat Transcool ST 16, generator z močjo do 19,2 kW, motor Kubota Diesel 1703 BG, rezervoar za gorivo 160 litrov, -- napake, spremembe in drugačna interpretacija podatkov pridržane, ilustrativne slike --, več informacij na: !, več podrobnosti: ! Iedpfxozzv Eie Ahcetl

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902024358, lastna masa: 6.149 kg, največja dovoljena obremenitev: 28.851 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2018, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.790 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: modra, Na slikah so prikazana arhivska gradiva, vozilo pa je morda še vedno v uporabi! #Šasija, sedelna prikolica, prevozniška služba Fino zrnata jeklena varjena konstrukcija, sedelna plošča z zamenljivim 2-palčnim kraljevskim klinom Zunanji okvir rahlo nagnjen z „Load-Lock-profilom“ za pritrditev zategovalnih pasov Iodpfx Ahjwyiw Escjtl 13 parov zank dodatno vgrajenih v zunanji okvir, vsak par prenese 2,5 tone 24 ton. Dvojna oporna noga, upravljanje z ene strani, z ravnim spodnjim delom, brez kompenzacije potiska Izvlečna lestev na zadnji strani Stranski blokator vrat Podložni klini s nosilcem Paletni zaboj za 32 euro palet (dolga izvedba), oddaljenost od tal približno 300 mm Opomba: Prostori med opornimi nogami oziroma prosti kot nihanja zadaj približno 1930 mm Podvozni ščit, jeklo, pocinkano Ščitniki proti brizganju zadaj, prek celotne širine Polovični blatniki z zaščitnimi ščitniki proti brizganju samo na zadnji osi Zaščita zadaj „Blokator“ – prečna jeklena kotna palica, pocinkana, kot zaščita pred viličarjem in za zaščito tečajev vrat 4 pari priveznih zank, označene z rumeno barvo Opora za palete na obeh straneh, približno 15–20 mm visoka, v vijični izvedbi, višina nakladanja se zmanjša za približno 15–20 mm Škatla za orodje, nerjaveče jeklo, š=600/v=400/g=500 mm, s poliranimi vrati, zaklenljiva #Zadnja stena / zadnji vzdolžni profili Zadnji vzdolžni profili, jeklo, do spodnjega roba strehe, pritrdilni elementi za ponjavo z okroglimi cevemi in objemkami za napenjanje ponjave Zadnja vrata, 2-krila z 2 notranjimi rotacijskimi zapahi na vsakem krilu #Ponjava Ponjava z varjenimi horizontalnimi in vertikalnimi trakovi Sistem „Quick Lock“ za stransko ponjavo z osrednjim zapahom, na levi strani Objemke za napenjanje iz nerjavečega jekla na desni strani Zanka za carinsko vrv, ki poteka po obodu, z nosilcem na čelni steni (brez carinskega zapaha, ni v povezavi s sistemom „Quick Lock“) Nalepke s podatki o stranki na stranskih ponjavah in zadnjih vratih Ponjava z visoko trdnimi vgrajenimi vzmetnimi jeklenimi trakovi, na levi strani (Pozor! Potem ni več vstavnih letev na levi strani) #Streha Drsna streha, zadnji del je dvižni, ponjava je drsna od zadaj proti spredaj, barva ponjave: bela EcoLift – dvižna streha, ki jo je mogoče dvigniti za približno 380 mm, na obeh straneh, s podporo s plinskimi blažilniki Optimalen odbijač dežja na zadnji strani, zgoraj na zadnjem nosilcu, nad vrati #Barvanje Okvir: Vroče pocinkano, vključno s pasivizacijo Oporne noge: Črno barvane Sprednji vzdolžni profili: Pocinkani in pobarvani v barvo čelne stene Čelna stena: MB 5328, modra Zadnji vzdolžni profili: Pocinkani in pobarvani v barvo zadnje stene Zadnja stena: MB 5328, modra Ponjava: RAL 5010, alpska modra Pokrov paletnega zaboja: RAL 2011, oranžna Na slikah so prikazana arhivska gradiva, vozilo pa je morda še vedno v uporabi!

Stanje: rabljeno, največja dovoljena obremenitev: 28.200 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2011, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 13.450 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.800 mm, prostornina tovornega prostora: 93 m³, Oprema: ABS, * 9654 – identifikacijska številka vozila za telefonske povpraševanja * ABS, osi BPW-Eco-Plus, kolutne zavore, zračna vzmetitev za dvigovanje in spuščanje, 1. os je dvižna os, predal za orodje, portalna vrata, nastavljiva pregrada, ponjava na rolo, platforma, vrata spredaj na čelni steni * Zavore popolnoma NOVE * Gume 1. os: 385/65R22,5 (3 / 12 mm) * Gume 2. os: 385/65R22,5 (11 / 8 mm) * Gume 3. os: 385/65R22,5 (12 / 7 mm) ----naš e-poštni naslov: Itedowk Ttxjpfx Ahcol     naša storitev za vas:       - ureditev začasnih ali carinskih registrskih tablic       - prevoz / dostava po vsej EU       - carinski postopki za vozila, ki so namenjena izvozu v tretjo državo Whatsapp za angleščino, nemščino, ruščino in druge jezike:

Stanje: rabljeno, lastna masa: 12.050 kg, največja dovoljena obremenitev: 32.950 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2015, dolžina tovornega prostora: 14.450 mm, širina tovornega prostora: 2.670 mm, višina nakladalnega prostora: 2.590 mm, skupna dolžina: 2.720 mm, skupna širina: 4.000 mm, skupna višina: 15.500 mm, vzmetenje: zrak, velikost pnevmatike: 425/65R22,5, gradbena višina: 4.000 mm, Oprema: ABS, registracija tovornjaka, Pacton TRD 345 3-axle box trailer | Brakes: disc brakes | Axle type: SAF | Tyres: 425/65R22.5 | Axle 1: Steered, tyre tread left: 7.0 mm, tyre tread right: 15.0 mm | Axle 2: Tyre tread left: 7.0 mm, tyre tread right: 8.0 mm | Axle 3: Steered, tyre tread left: 10.0 mm, tyre tread right: 7.0 mm | Wabco Smartboard | Chassis material: steel | Kingpin size: 2 inch | Central lubrication | ABS, EBS | Subject to errors, input mistakes and prior sale. Isdpfx Ahozdi Tfecjtl

Stanje: rabljeno, prevoženi kilometri: 390.866 km, moč: 375 kW (509,86 KM), prva registracija: 04/2017, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: > 3 osi, zavore: retarder, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Celoten tovornjak: MB Arocs 1951 s 3-osno aluminijasto prikolico (Schwarzmüller) Hardox-Inside, izjemno velika nosilnost, kratka kabina, popravljena škoda zaradi nesreče, zelo dobro ohranjeno vozilo, redno servisirano po predpisih, sončna zaščita, blokada diferenciala zadnje osi, prestavna razmerja za gradbišča, okrogle luči. Nemško vozilo, od prvega lastnika / na voljo takoj. Prosimo, ne pošiljajte e-poštnih vprašanj, ali je vozilo še na voljo! Vsa vozila, ki so objavljena na spletu, so še na voljo! Ne prevzemamo odgovornosti za tiskarske in prepisovalne napake. Itodpezxgi Hefx Ahcel Pridržujemo si pravico do sprememb, napak in vmesne prodaje.

Stanje: rabljeno, lastna masa: 6.990 kg, največja dovoljena obremenitev: 38.010 kg, skupna masa: 45.000 kg, prva registracija: 08/2007, medosna razdalja: 1.810 mm, barva: siv, prevoženi kilometri: 100 km, vrsta prenosa: mehanski, Oprema: ABS, Lastna teža: 6990 kg, dovoljena skupna masa: 45000 kg, elektronski zavorni sistem EBS, osi BPW, zaklep za kontejnerje, 2 krmiljeni osi, hidravlično in prisilno krmiljenje!, prodaja v komisijski obliki, ponudba ni zavezujoča, pridržana možnost napake in vmesne prodaje. Slika ni nujno identična s ponudbo. Itodez A Invjpfx Ahcol

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902028859, lastna masa: 5.660 kg, največja dovoljena obremenitev: 29.340 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, barva: rdeča, Chassis Semi-Trailer for Freight Forwarding Steel welded construction in reinforced design, only two longitudinal beams as double T-beams with steel/checker plate between the beams. Fifth wheel plate with replaceable 2" king pin. Protective cover for rear lights. 8 pairs of lashing rings, bolted or welded to the frame as per manufacturer’s choice. 24 t two-speed landing gear, single-sided operation, with straight base, without compensating leg. Wheel chocks with holders. Side underrun protection in aluminium. Rear underrun protection in galvanized steel. Iedpfx Asza Anvehcjtl Half-shell mudguards with anti-spray flaps according to EC specifications. 1 spare wheel holder for 1 spare wheel, incl. wheel fixing kit. 1 toolbox recessed between the longitudinal beams. 8 wooden stake pockets, as per manufacturer’s preference, bolted onto the frame, each with 2 telescopic wooden stakes adjustable from 1800 mm to 2800 mm, 7 t per pair. Axles + Suspension BPW disc brake axles with 430 mm disc diameter. Air suspension with lift & lower valve, axle safety cables. First axle with automatic lift, incl. forced lowering and start assist, activated by “3x brake” (start assist functions up to 30% axle overload and up to 25 km/h). Axle spacing offset 1410/1310 mm (suitable for combined transport) up to 44 t gross train weight. Wheels and Tyres 385/65 R 22.5" Manufacturer’s choice. Steel rims, factory silver. Brake System 2-line compressed air brake system. Spring-type parking brake. Axle load detection via EBS CAN-bus signal for display in truck cab (truck must be equipped accordingly, no truck installation, not a verified scale). 2 front coupling heads, non-interchangeable, without connection line. EBS (Electronic Braking System) with front EBS socket, without connecting cable. Note: The trailer may only be towed by tractors that can guarantee ABS effectiveness! “Safe Parking.” Electrical System 24 Volt, multi-chamber tail lights, side LED marker lamps in yellow. 2 white position lamps front. 2 white/red lane-control lamps rear. 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cables. Front Bulkhead/Corners Steel/mesh bulkhead, approx. 2,300 mm high, bolted to frame. Approval / Signage Registration country: Germany Type approval according to EC 2007/46 Prepared for single-row license plate holder Contour marking with reflective tape per ECE R 048, white on sides, red at rear Warning sign per ECE-70 Paintwork Frame: DB 7350 Novagrau Landing gear legs: black coated Bulkhead: hot-dip galvanized

Stanje: rabljeno, največja dovoljena obremenitev: 32.040 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2014, dolžina tovornega prostora: 13.720 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 75 m³, skupna dolžina: 13.950 mm, skupna širina: 2.550 mm, skupna višina: 3.600 mm, Leto izdelave: 2014, Oprema: ABS, * Orten SafeSerfer 2 v 1 * SafeSerfer, pločevinasta stranska stena na levi strani, zavesa na desni strani * Certificirano po standardih DEKRA VDI 2700 in DIN EN 12642, koda XL * Certifikat za prevažanje pijač * Certifikat za prevažanje točene pijače Itsdpfx Ajzxkavehcel * Certifikat za kemikalije (IBC) * Certifikat za prevoz odpadnega papirja * 1 vrsta pritrditvenih elementov za tovor s 2 prečnimi palicami * 2.000 kg, Bär, dvižna stranska stena * Osnova SAF * Dvižna os * Drsna streha Edscha * Kamera za vzvratno vožnjo * Pritrdilne točke na zunanjem okvirju

Stanje: rabljeno, največja dovoljena obremenitev: 32.040 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2014, dolžina tovornega prostora: 13.720 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 75 m³, skupna dolžina: 13.950 mm, skupna širina: 2.550 mm, skupna višina: 3.600 mm, Leto izdelave: 2014, Oprema: ABS, * Orten SafeSerfer 2 v 1 * SafeSerfer, pločevinasta stranska stena na levi strani, zavesa na desni strani * Certificirano po standardih DEKRA VDI 2700 in DIN EN 12642, koda XL * Certifikat za prevažanje pijač * Certifikat za prevažanje točene pijače * Certifikat za kemikalije (IBC) * Certifikat za prevoz odpadnega papirja * 1 vrsta pritrditvenih elementov za tovor s 2 prečnimi palicami * 2.000 kg, Bär, dvižna stranska stena * Osnova SAF * Dvižna os Ijdpjzxkbgefx Ahcotl * Drsna streha Edscha * Kamera za vzvratno vožnjo * Pritrdilne točke na zunanjem okvirju

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902027997, lastna masa: 6.832 kg, največja dovoljena obremenitev: 28.168 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2021, dolžina tovornega prostora: 13.460 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.740 mm, skupna dolžina: 15.100 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 100 odstotek, barva: črn, These images are archive photos; the vehicle may still be in use! Equipment details available on request. Iedpewk Dg Nofx Ahcotl

Stanje: rabljeno, največja dovoljena obremenitev: 14.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2012, naslednji pregled (TÜV): 11/2026, dolžina tovornega prostora: 10.350 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 850 mm, skupna širina: 2.550 mm, Skupna dolžina: 12.000 mm Nakladalna dolžina: pribl. 10.350 mm Širina: 2.550 mm / nakladalna širina pribl. 2.400 mm Nakladalna višina: pribl. 850 mm Dodatne informacije - Tretja os prisilno vodena Iedpfez Dm Iqox Ahcotl - Notranja nakladalna višina pribl. 3.150 mm - Dvojne pnevmatike 215/75R17,5 - BPW osi - Zračno vzmetenje - Pomikajoča cerada Vozilo je lahko polepljeno z oglaševanjem, označeno in/ali z ostanki starih napisov. Več enakih na zalogi

Stanje: rabljeno, največja dovoljena obremenitev: 27.206 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2010, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 13.310 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 86 m³, Oprema: ABS, * 7861 – ID vozila za telefonska povpraševanja Itjdpfx Ahexth Rnjcjl * Tip: SKO 24/L – 13.4 FP 60 COOL * ABS, EBS, osi Schmitz, kolutne zavore, zračna vzmetenje (dvigovanje in spuščanje), dvižna os, predal, portalna vrata, dvonadstropna konstrukcija z nosilci * Carrier Maxima 1300, dizel (ENG 5972 ur), električni pogon (SBY 5.243 ur), -30 °C / +30 °C * Kontenjer je oblepljen s folijo / oglasom! * Pnevmatike 1. os: 385/65R22,5 (3 / 4 mm) * Pnevmatike 2. os: 385/65R22,5 (7 / 6 mm) * Pnevmatike 3. os: 385/65R22,5 (8 / 8 mm) ----naš e-poštni naslov:     naša storitev za vas:       - pridobitev začasnih ali carinskih registrskih tablic       - prevoz / dostava po vsej EU       - carinski postopki za vozila v tretje države WhatsApp za angleščino, nemščino, ruščino in druge jezike:

Stanje: rabljeno, največja dovoljena obremenitev: 30.430 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2020, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.719 mm, Oprema: ABS, Schwarzmüller SPA 3/E, ULTRALIGHT, letnik 10/2020, SAF osi, 1. in 3. dvigljiva os, premična streha, premična ponjava, portalna vrata, kolutne zavore, ABS, pnevmatike 385/65 R22,5 stanje: 1. os 9 mm, 2. os 8 mm, 3. os 13 mm, višina nakladanja 2719 mm, rezerva. Lastna masa 5570 kg, skupna masa 36.000 kg. Več pod: FB: Dvorak Trucks Czechia UVOZ-IZVOZ-PRODAJA-NAKUP-KOMISIONA PRODAJA TOVORNJAKOV IN GRADBENIH STROJEV SERVIS TOVORNJAKOV Itjdpfx Asxfx Nlshcol SERVIS PNEVMATIK PRALNICA TOVORNJAKOV TAHOGRAF