Prikolica z nizko platformoFLIEGL
DTS 300 3-Achs Tiefl Luft Hydraul - 780
Prikolica z nizko platformo
FLIEGL
DTS 300 3-Achs Tiefl Luft Hydraul - 780
Stalna cena brez DDV
33.300 €
(39.627 € bruto)
Stanje
Novo
Lokacija
Wiesmoor 

Prikaži slike
Prikaži karto
Osnovni podatki
Cena in lokacija
Stalna cena brez DDV
33.300 €
(39.627 € bruto)
- Lokacija prodajalca:
- Ilexstr. 41, 26639 Wiesmoor, Nemčija

Klic
Tehnične podrobnosti
- Skupna masa:
- 24.000 kg
- Največja dovoljena obremenitev:
- 17.900 kg
- Konfiguracija osi:
- 3 osi
- Dolžina tovornega prostora:
- 8.670 mm
- Širina tovornega prostora:
- 2.500 mm
- Višina nakladalnega prostora:
- 860 mm
- Skupna širina:
- 2.520 mm
Podrobnosti ponudbe
- ID ponudbe:
- A186-11-096
- Št. reference:
- - 780
- Nazadnje posodobljeno:
- dne 10.07.2025
Opis
New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300
Vehicle fully hot-dip galvanized
Gross weight: 24,000kg / 30,000kg
Unladen weight: 6,100kg
Payload: 17,900 / 23,900kg
Overall length: 10,890mm
Loading length: total 8,670mm; 6,500mm low bed including rear bevel / 2,170mm gooseneck
Lsdsv D T R Espfx Afloru
Width: 2,520mm
Loading height: 860mm
Further information:
plus freight/preparation ex stock location 26639 Wiesmoor, EUR 1,280.00 net
Leasing offer: Term 48 months, down payment only the VAT. Residual value 40%
Monthly installment: EUR 569.00
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
Wheel chocks with holders
Aluminum side underrun protection
Full-width rear mudflaps (not in combination with forklift mounting)
Semi-shell fenders on 1st axle with anti-spray mudflaps
Anti-spray mudflaps behind 2nd and 3rd axles
1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable
Extendable outriggers to 3,000 mm (not at rear bevel). (Track width of construction machinery or vehicles to be transported must not exceed outer frame width of 2,550 mm)
Central storage compartment for wooden planks on the loading area
70 mm wooden planks for extension to 3,000 mm
Lashing points for low-loader
1 pair of lashing cutouts in the front longitudinal beam on the gooseneck, each 10 t
4 pairs of lashing holes in the outer frame of the gooseneck, each 5 t (for attaching tie-down straps)
7 pairs of inlaid lashing rings on top and side of outer frame, each 10 t (1 at gooseneck front, 6 in low bed)
First lashing ring 250 mm from front and last max. 250 mm from rear, lashing point spacing not greater than 1,100 mm
5 pairs of inlaid ring lashing points in outer frame, each 5 t (convertible to stake pockets)
2 additional pairs of foldable lashing rings, each 10 t (1 at gooseneck - protruding, 1 recessed in floor behind last axle)
Drawbar assembly for turntable trailer
Drawbar with certified 40 mm towing eye
Drawbar height adjustment via spring mechanism
Axles & Suspension
Drum brake axles, brand per manufacturer’s choice
Axle/chassis laser alignment to reduce tire wear and fuel consumption
Air suspension with raise & lower valve
Wheels and tires
235/75 R 17.5'', per manufacturer’s choice
Steel twin wheels, factory silver finish
Braking system
Dual-line compressed air brake system
Spring-operated parking brake
Vehicle stability control system
Axle load detection via EBS-Canbus signal for display in cab (truck must be pre-equipped, not installed/no certified scale)
2 non-interchangeable coupling heads at front with connection lines to tractor unit
24V EBS, electronic braking system with EBS connector at front and connecting cable
Note: The trailer may only be towed by towing vehicles that ensure proper ABS function!
Electrics
24V, multi-chamber lights, side yellow LED lighting
2 white position lights at front
2 white/red lane control lamps at rear
2 x 7-pin non-interchangeable connectors at front, with connection cable
1 LED revolving beacon with holder, switched via parking light, removable
2 pairs of warning panels, double LED-lit and extendable to 3,000mm
Floor
Gooseneck front with steel/chequer plate cover
Storage compartment recessed in gooseneck ramp
Subsequent area with approx. 70 mm softwood floor, wheel arch area with steel/chequer plate
Rear bevel with 70 mm softwood flooring
Low-loader platform including rear bevel: 6,500mm
Loading ramps
Steel ramps, 2,800 mm long, 750 mm wide, side mounted
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Vehicle fully hot-dip galvanized
Gross weight: 24,000kg / 30,000kg
Unladen weight: 6,100kg
Payload: 17,900 / 23,900kg
Overall length: 10,890mm
Loading length: total 8,670mm; 6,500mm low bed including rear bevel / 2,170mm gooseneck
Lsdsv D T R Espfx Afloru
Width: 2,520mm
Loading height: 860mm
Further information:
plus freight/preparation ex stock location 26639 Wiesmoor, EUR 1,280.00 net
Leasing offer: Term 48 months, down payment only the VAT. Residual value 40%
Monthly installment: EUR 569.00
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
Wheel chocks with holders
Aluminum side underrun protection
Full-width rear mudflaps (not in combination with forklift mounting)
Semi-shell fenders on 1st axle with anti-spray mudflaps
Anti-spray mudflaps behind 2nd and 3rd axles
1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable
Extendable outriggers to 3,000 mm (not at rear bevel). (Track width of construction machinery or vehicles to be transported must not exceed outer frame width of 2,550 mm)
Central storage compartment for wooden planks on the loading area
70 mm wooden planks for extension to 3,000 mm
Lashing points for low-loader
1 pair of lashing cutouts in the front longitudinal beam on the gooseneck, each 10 t
4 pairs of lashing holes in the outer frame of the gooseneck, each 5 t (for attaching tie-down straps)
7 pairs of inlaid lashing rings on top and side of outer frame, each 10 t (1 at gooseneck front, 6 in low bed)
First lashing ring 250 mm from front and last max. 250 mm from rear, lashing point spacing not greater than 1,100 mm
5 pairs of inlaid ring lashing points in outer frame, each 5 t (convertible to stake pockets)
2 additional pairs of foldable lashing rings, each 10 t (1 at gooseneck - protruding, 1 recessed in floor behind last axle)
Drawbar assembly for turntable trailer
Drawbar with certified 40 mm towing eye
Drawbar height adjustment via spring mechanism
Axles & Suspension
Drum brake axles, brand per manufacturer’s choice
Axle/chassis laser alignment to reduce tire wear and fuel consumption
Air suspension with raise & lower valve
Wheels and tires
235/75 R 17.5'', per manufacturer’s choice
Steel twin wheels, factory silver finish
Braking system
Dual-line compressed air brake system
Spring-operated parking brake
Vehicle stability control system
Axle load detection via EBS-Canbus signal for display in cab (truck must be pre-equipped, not installed/no certified scale)
2 non-interchangeable coupling heads at front with connection lines to tractor unit
24V EBS, electronic braking system with EBS connector at front and connecting cable
Note: The trailer may only be towed by towing vehicles that ensure proper ABS function!
Electrics
24V, multi-chamber lights, side yellow LED lighting
2 white position lights at front
2 white/red lane control lamps at rear
2 x 7-pin non-interchangeable connectors at front, with connection cable
1 LED revolving beacon with holder, switched via parking light, removable
2 pairs of warning panels, double LED-lit and extendable to 3,000mm
Floor
Gooseneck front with steel/chequer plate cover
Storage compartment recessed in gooseneck ramp
Subsequent area with approx. 70 mm softwood floor, wheel arch area with steel/chequer plate
Rear bevel with 70 mm softwood flooring
Low-loader platform including rear bevel: 6,500mm
Loading ramps
Steel ramps, 2,800 mm long, 750 mm wide, side mounted
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Pošlji zahtevo
Telefon & Faks
+49 4944 ... oglasi
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake
















