Wiese 3-Achs-Tieflader Mit Rampen Und Radmulden nakup rabljenega (44.690)

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swivel supports at the rear of the chassis * Straight pressed steel fenders * Spare wheel holder under the chassis, right side ----Low Loader Deck: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board plug-in, 150 mm high * Rear slope on fifth wheel platform to low-bed approx. 700 mm long * Fifth wheel platform with 50 mm timber planks, low-bed deck with 60 mm timber planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to a total width of 3 meters (not on rear slope; extension planks available with storage on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings on each side, plus 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t lashing rings, pivotable and lowerable, recessed in the outer frame * 2 x 6.4 t lashing eyes per side, plus 1 lashing ring at the excavator arm rest * 2 x container locks directly after the neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm rest from end of last fixed axle over steering axle to end crossbeam, with internal reinforcements, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanical one-piece hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * Outer board on ramp made from 50 mm hardwood * Climbing strips on outer frame of ramp and on approach slope * Rubber matting on ramp and approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump performance in the truck between 40 l/min and 120 l/min) ----Loading Dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm Knodoy Ngzyepfx Ag Eea * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Coating: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support legs, air tanks painted in a black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included with the offered vehicle ----Delivery time: * available from c

Stanje: novo, največja dovoljena obremenitev: 28.640 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Oprema: ABS, Zavora: Knjdpfx Agoxxf Tws Esa * Wabco EBS-E / ABS (elektronski zavorni sistem z RSS) * Siliščno odklepanje za vzmetne cilindre * Kolutne zavore 22,5" * Zavorni sistem za finišer s skrajšanimi zadnjimi blatniki in ročnim stikalom za finišer ----Os: * 3 x 9 t BPW ali SAF osi (odvisno od razpoložljivosti) * Dvižna os z zagonsko pomočjo ----Vzmetenje: * Zračno vzmetenje z avtomatskim spuščanjem med postopkom kipanja (za povečanje stabilnosti, možno izklopiti za stroje za polaganje asfalta) ----Elektrika / razsvetljava: * Sistem za nadzor tlaka v pnevmatikah (TPMS) * 1 x 15-polna vtičnica za prikolice * 5-komorni zadnji žarometi s zaščitno streho * 1 x dodatni LED delovni žaromet * utripajoče stranske označevalne luči ----Splošni dodatki: * Aluminijasti zračni rezervoar * Jost teleskopske jeklene podporne noge s ploščato nogo (mogoče odklopiti le v praznem stanju) * 4 m aluminijaste lestve, nameščene desno ob strani nad blatniki * zaprti plastični posamezni blatniki * preklopna zaščita proti podletu * vlečna kljuka zadaj * pregibna lestev za vzpon spredaj levo ob strani * škatla za dokumente na prednji steni ----Okvir: * Šasija iz visoko trdnega finezrnatega jekla s prečkami, tipičnimi za Meiller ----Kiparska nadgradnja: * Polkrožna jeklena zadnja kiper korita * Prednja stena s 600 mm streho kot nosilec ponjave * Stranske stene z robustnim neprekinjenim zgornjim robom, nagnjenim navznoter * Prednja in zadnja stena poševni ----Debelina dna, stranskih sten, prednje in zadnje stene: * Prednja stena 4 mm iz jekla BS 70 * Zadnja loputa 4 mm iz jekla HBW 400 * Stranske stene iz 4 mm jekla HBW 450 * Prilagojeno dno iz 5/6 mm Hardox jekla 450 ----Hidravlični cilinder: * Sprednji hidravlični cilinder z zmernim delovnim tlakom ----Hidravlična zadnja stena: * Ležeča hidravlična in nihajoča zadnja stena. Upravljanje hidravlične zadnje stene prek mehanskega krogelnega ventilskega bloka ----Ponjave: * električna drsna ponjava - RAL 9006 bela aluminij - s stikalom na šasiji in daljinskim upravljalnikom ----Nakladalna prostornina: * cca. 25 m³ ----Višina sedla: * prazno cca. 1.247 mm * naloženo cca. 1.217 mm ----Barva: * Barvanje šasije v RAL 7021 črno sivi * Kiper nadgradnja v RAL 9006 belo aluminij ----Splošne informacije: * --Tehnično dovoljena skupna masa je 39.000 kg-- * Možnost napake in predhodne prodaje * Novo vozilo s tovarniško garancijo ----Dobavni rok: * dobavljivo od 37. tedna / 2026

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle trailing steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift-and-lower function and RtR valve ----Electrics / Lighting: Knsdpoy Ngz Hefx Ag Eja * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder under the chassis on the right side ----Low Loader Deck: * Gooseneck platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the gooseneck, foldable and removable * Rear wall – 150 mm – fitted * Rear slope at the gooseneck platform to the low-bed approx. 700 mm long * Gooseneck platform with 50 mm timber planks, low-bed platform with 60 mm timber planks * Tread plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to 3 m total width, but not on the rear slope (extension planks present with storage on gooseneck platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the gooseneck platform: 2 x 6.3 t lashing rings each side and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform sides: 2 x 13.4 t lashing rings each, and 4 x 10 t swivel and lowerable lashing rings recessed in the outer frame * 2 x 6.4 t lashing eyes per side and rear 1 lashing ring in the excavator arm recess * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Arm Recess: * Excavator arm recess from end of last rigid axle, over steering axle to end crossmember, continuous, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading Ramps: * Mechanically one-piece hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer retrofit of hydraulic ramp shifting * The outer board of the ramp consists of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the drive-up slope * Rubber on the ramp and drive-up slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from 40 up to 120 l/min) ----Loading Dimensions: * Loading area, gooseneck platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm drive-up slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension brackets hot-dip galvanized * Axles, landing gears, air reservoirs painted in a black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may include features not part of the offered vehicle * Sample images ----Delivery time: * tba

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option via EBS signal in the truck cabin – no installation required on the truck side * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Fittings: * Aluminum air reservoir Knsdpex Nlkaefx Ag Eoa * Stainless steel tool box, approx. 1,000 x 300 x 600 mm, mounted on the side * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, drilled for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – 12 pcs 3,000 kg lashing rings per side included * 5 pockets per side for pipe stakes (100 x 50 mm) in the outer frame (stakes not included) * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanized drum supports, secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with transverse brace * Maximum drum weight per support 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided drum securing against turning and unspooling ----Loading height: * Approx. 1,040 mm when loaded ----Coating: * Chassis, bogie, drawbar, outer frame, rear under-run protection hot-dip galvanized * Axles painted in a black shade

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar, 1,800 mm long with 40 mm towing eye Knjdpfx Agex Nlkgo Eoa ----Electrics / Lighting: * Tyre pressure monitoring system with display capability in the truck dashboard via EBS signal - without truck-side installation - * 15-pin power connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Fittings: * Aluminium air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun guard ----Platform Bed: * Zurr-fix outer frame, 45° edged with hole pattern for lashing equipment, lashing force per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – as standard, each side fitted with 12 x 3,000 kg lashing rings * Each side with 5 sockets for stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanised drum supports secured via container locks, with lateral forklift pockets, centre-to-centre 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clearance between support arms approx. 1,775 mm, with crossbeam * Maximum drum weight per cable drum support: 6,000 kg * Without drive and without drum brake * Support arm with locking device for securing drum shaft * 76 mm diameter steel drum shaft with centring and rotatable ends * 2 set collars * 2 centring cones made of polyamide * 4 x 3.2 t lashing eyes on support arms for customer-side securing of drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm loaded ----Coating: * Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 t GVW possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from approx. CW 51 / 2026

Stanje: novo, največja dovoljena obremenitev: 28.660 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Oprema: ABS, Brake system: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * 22.5" disc brakes * Paver brake with shortened rear mudguards and manual paver switch Axles: * 3 x 9 t BPW axles * 1st lift axle with start-up aid Suspension: * Air suspension with automatic lowering during tipping process (for increased stability, deactivation possible for pavers) Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * 5-chamber tail lights with protective cover * 1 x additional LED work light * Flashing side marker lights General Attachments: * Aluminium air tank * Jost telescopic steel landing legs with plate foot (uncoupling only when empty) * 4 m aluminium access ladder, stored on the right side above the mudguards * Enclosed plastic single mudguards * Folding underrun guard * Rear towing eye * Folding access ladder on the front left side * Document box on the front wall Frame: * Chassis made of high-strength fine-grain steel with Meiller-specific torsion cross members Tipping Body: * Half-shell steel rear tipper body (front hydraulic ram with medium working pressure) * Front wall with 600 mm front roof as tarpaulin carrier * Side walls with robust, continuous, inward-sloping top rail * Slanted front and rear wall * Overlapping tailgate with rubber seal and two additional toggle fasteners as well as automatic 2-hook locking system Thickness of bottom, side walls, front and rear wall: * Front wall 4 mm BS 70 steel * Tailgate 4 mm HBW 400 steel * Side walls 4 mm HBW 450 steel * Tailored floor of 5/6 mm Hardox 450 steel Tarpaulin: * Electric sliding tarpaulin – RAL 9006 white aluminium – with switch on chassis and remote control Load volume: * Approx. 25 m³ Knjder Exzmepfx Ag Eea Saddle height: * Unladen: approx. 1,247 mm * Laden: approx. 1,217 mm Painting: * Chassis painted RAL 7021 black grey * Tipping body in RAL 9006 white aluminium General Information: * Permissible gross weight technically possible up to 39,000 kg * Errors and prior sale reserved * New vehicle with manufacturer's warranty Delivery time: * Immediately available ex works Egestorf on the A7

Stanje: novo, lastna masa: 6.000 kg, največja dovoljena obremenitev: 24.000 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.540 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 3-AXLE HUMBAUR LOW-LOADER TRAILER INCLUDES: 3 PAIRS OF 6-TON LASHING POINTS IN THE OUTER FRAME => HOT-DIP GALVANIZED CHASSIS FRAME => HOT-DIP GALVANIZED BOGIE FRAME => HOT-DIP GALVANIZED LOADING RAMPS => 10 x 10-TON LASHING POINTS => 10 x 3-TON LASHING POINTS, outer frame => 8 x 2-TON LASHING POINTS, above wheels => SPRING-ASSISTED LIFTING DEVICE FOR RAMPS => 40 mm DRAWBAR => APPROX. 2,700 MM LONG LOADING RAMPS => APPROX. 750 MM WIDE LOADING RAMPS => TWIN TIRES 235/75 R17.5 INCH => LOADED PLATFORM HEIGHT ONLY APPROX. 860 MM => COUPLING LENGTH / B-LENGTH APPROX. 10,720 MM => FRONT CORNERS BEVELLED => TWO FOLDING SUPPORT LEGS AT REAR => AND MUCH MORE => Delivery freight: 2.90 Euros plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex works D-86368 Gersthofen* *Sale to commercial customers only!* *Pictures may differ and serve only as an approximate reference => may show/include options subject to surcharge* Knodpfed U A Tgox Ag Eoa

Stanje: novo, lastna masa: 6.650 kg, največja dovoljena obremenitev: 23.350 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.540 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 3-AXLE LOWBED TRAILER => FULL AIR SUSPENSION (front and rear) => HOT-DIP GALVANIZED Permissible total weight: 30,000 kg Payload: approx. 23,350 kg Chassis frame hot-dip galvanized via immersion bath Air suspension SAF axle with drum brake EBS electronic braking system Tyres: 235/75R17.5 – 12 units Lowbed length: approx. 6,500 mm 3 pairs of 10 t lashing rings recessed in the lowbed 2 pairs of 10 t lashing rings recessed in the highbed 4 pairs of 3 t lashing points on the outer frame 3 pairs of 6 t lashing eyes on the outer frame 6 pairs of stake pockets 90 x 50 mm in the outer frame Toolbox at the front, top of the platform with hinged lid 3-metre widening package without incline, with fold-out supports Spring ramp lifter Knedpfjhmm N Ujx Ag Eja 4 x warning panels Rotating beacon Storage compartment under the loading floor 1-piece ramp approx. 3,150 x 750 mm Softwood flooring for loading area and ramps Optional extras if required: Hydraulic ramp lifter €2,690.00 + VAT => Delivery freight cost: €2.90 plus VAT per km => Prices are ex works D-86368 Gersthofen Your direct contact: Mr. Hirn, Tel. DOLL VEHICLE MANUFACTURING *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* *Sale to business customers only!* *Images may vary and are for general guidance only => may show/accessories subject to surcharge*

Stanje: rabljeno, lastna masa: 11.300 kg, največja dovoljena obremenitev: 29.700 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2006, vzmetenje: zrak, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, * German semi-trailer * Special low-loader for transporting commercial vehicles and construction machinery * Manufactured by premium Dutch builder Estepe (Estepe type E0PL 24-41) * Years of experience in building such specialized low-loaders for truck and construction machinery transport – every detail considered * Naturally equipped with extendable low-bed, hydraulic ramps, and hydraulic platform * Special winch with remote control, etc. * BPW axles * 3rd axle - lift axle * Air suspension with lift/lower function * Central lubrication system * Gross vehicle weight: 41,000 kg * Unladen weight: 11,300 kg * Payload: 29,700 kg Should you require a new TÜV inspection, we will gladly provide a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV certification, new SP, or new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Kodpfx Agortbb So Eena Note: We strongly advise and recommend viewing and inspecting the goods to avoid any misunderstandings regarding condition and suitability. Viewing and inspections are possible and expressly welcomed at any time by appointment. All details are provided without guarantee. We do not accept liability for errors or inaccuracies in the offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stanje: novo, največja dovoljena obremenitev: 30.310 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Gross weight: 40,000 kg Payload: 30,310 kg Unladen weight: 9,690 kg Overall length: 12,000 mm Loading length: 10,000 mm Loading bed: 7,150 mm including 850 mm drive-on slope Loading height: 900 mm 1st pair of wheel recesses after drop in the loading bed, length at bottom approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the loading bed, length at bottom 600 mm, 300 mm deep Extensions to 3,000 mm, warning boards, rotating beacon, comprehensive lashing package 5 pairs of stake pockets in the outer frame Excavator arm recess, 1,800 mm long, 150 mm deep Drawbar 50 mm Air suspension with raise/lower valve, separately operable BPW drum brakes Tyres: 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Ramps: 2,800 mm x 750 mm, hydraulically operated Hydraulic lateral displacement Hire purchase offer: term 48 months, residual value 40%, down payment only the VAT on the installments, monthly payment EUR 970.00 net Vehicle available from 11.09.2023 from the Neumünster trade fair. Visit us at Nordbau - Stand West 121, right next to the main entrance. Kedpfonzlg Dsx Ag Esna Further 3-, 4- and 5-axle low loaders new and used available immediately

Stanje: rabljeno, največja dovoljena obremenitev: 37.530 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2012, naslednji pregled (TÜV): 11/2026, skupna širina: 3.000 mm, skupna višina: 3.780 mm, Oprema: ABS, * Gooseneck with foldable side walls * Low bed length: 11,950 mm - 15,450 mm * Low bed extendable in steps by 3,500 mm * Low bed width extendable by 460 mm * Hydraulically adjustable loading ramps (split, 2 parts) * Stake pockets * Wabco SmartBoard * 4 axles with twin tires * 1st axle liftable Kjdpfx Agsy T Dyze Esna * 3rd + 4th axle with steering function * Wheel chocks ----* Tire size: 235/75R17.5 * Technical gross weight: 58,000 kg * Unladen weight: 12,470 kg * Overall length: 13,700–17,200 mm * Overall width: 2,540–3,000 mm * Safety inspection due: 05/2026 ----Vehicle number: 12062----Subject to errors and prior sale----Advertising and various lettering have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions—we will take care of everything. Among other services, we can offer you the following for an additional fee:----* Trade-in of your old vehicle * HU/Safety inspection * Complete export processing * Financing brokerage * Application for export license plates * Vehicle transfers * Vehicle registration * Recovery and vehicle transport ----?YOUR VTS TEAM

Stanje: rabljeno, največja dovoljena obremenitev: 34.000 kg, skupna masa: 48.500 kg, konfiguracija osi: 3 osi, prva registracija: 10/2009, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 12.000 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 3.750 mm, skupna širina: 2.500 mm, skupna višina: 3.750 mm, Leto izdelave: 2009, Oprema: ABS, Zelo dober 3-osni nizkopodna prikolica Langendorf SATH 30/34 z ugrezi za kolesa, dvojno zložljive nakladalne rampe, tovorna površina 7.400 mm, sprednja ploščad 3.650 mm, zadnja ploščad 4.580 mm, od škripca do konca vozila 14.890 mm, nizko ležeča nakladalna postelja pribl. 500 mm in še več. Popolna nizkopodna prikolica za prevoz bagrov, tovornjakov in seveda viličarjev. Knedjwy E Ndjpfx Ag Eoa

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical folding supports at rear * Plastic toolbox, approx. 650 x 350 x 320 mm, mounted on the right side of the chassis at the front * Bolted underrun protection * Plastic quarter mudguards * Net hooks positioned at the central locking locations and 2 on the front wall ----Chassis: * High-tensile steel chassis ----Tipping Platform: * Steel pallet-type three-way tipper body with continuous side walls, upper inside pipe reinforcement, no central stanchions; drop-down with drop side spring assistance * Bolt-on rear stanchions * Combination steel swing doors on the rear wall, 2-leaf, asymmetrically split, can swing and lock 270°, not drop-down, with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bolt at the rear and central locking; deactivation for auto rear wall function when tipping backwards with door open * 4 mm fine-grained steel floor plate * Rear mounting rails for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner, plus 4 x 3 t lashing rings on each side recessed into the external frame ----Ramps: * 1 pair of aluminium drive-on ramps, approx. 3,570 x 410 mm (load capacity: 10 t/pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment under the loading platform, integrated into the chassis for the ramps ----Tyres: * Tyres 285/70 R19.5 Knedpfsl Th Htex Ag Esa ----Painting: * Chassis, drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized * Axles, springs, air tanks and support winch painted black * Drop sides painted RAL 9010 pure white * Other RAL-coloured side wall painting available at extra cost ----Information: * Reinforced body with load securing certificate * Vehicle has a day registration (not previously in use) * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer set ----Drawbar / Flange eye: * Height-adjustable drawbar (300 mm adjustment range) with 40 mm flange eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General attachments: * Jost mechanical landing gear in front * Two mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm mounted on the right side at the front of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks located at the central locking mounting points as well as 2 hooks on the front wall ----Chassis: * Chassis fabricated from fine-grain steel ----Tipper body: * Steel pallet three-way tipper body with continuous side walls, upper sections internally reinforced with pipe, no central stanchions, drop-side design with tailgate spring lifters * Rear stanchions bolted * Combination steel wing doors at the rear, double-leaf, asymmetrically divided, can swing open and lock to 270°, not collapsible, fitted with additional pendulum frame for automatic tailgate opening during tipping operation; locking by galvanized rotary bar at the rear and central locking; deactivation for automatic tailgate function when tipping backward with open wing doors * 4 mm fine-grain steel floor plate * Rear mounting rails for loading ramps ----Load securing: * Each corner fitted with one 5 t lashing ring, each side fitted with four 3 t recessed lashing rings in the outer frame ----Ramps: * One pair of aluminum access ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired & tracked vehicles * Rear lockable storage compartment for ramps integrated underneath the load area in the chassis ----Tyres: * Tyres 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, and rear support legs hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted in a shade of black * Side wall paintwork in RAL 9010 pure white * Other RAL color tones for side walls available at extra cost ----Additional Information: Kedpfx Ael Th Dueg Eena * Reinforced body with load securing certificate * Vehicle comes with one-day registration (never used) * Subject to errors and prior sale ----Delivery time: Immediately available ex Egestorf

Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: Extendable loading platform with rear chamfer approx. 500 mm x 8° 8 pairs of flip-out lashing rings 1 pair of recessed lashing rings at the front of the loading area Cutouts in the outer frame for securing straps Approx. 48 mm thick hardwood flooring; checker plate above the axles Two-Part Steel Ramps: One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg. Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle self-steering Technical axle load: 12,000 kg Knjdpfxol Sl Izs Ag Eja 4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually Tyres: 235/75 R 17.5 3PMSF Brake System: Brake system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU standards, 24 Volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer High-quality single-colour 2K topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel Structure: High-strength fine-grained steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the front wall 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connection panel 2 wheel chocks with holder on the front wall Mounting at the rear of the gooseneck for ALU approach ramps Bracket for beacon at trailer rear Galvanized supports under sloped area of load floor White reflective tape per EU regulations on sides, extension, and red at the rear Electro-hydraulic unit under the rear of loading platform Warning sign brackets including sockets left/right on gooseneck and rear plate Control valves for ramps mounted right side of trailer Mudflap at rear of trailer Manual and documentation on USB stick 3.5" loose king pin supplied On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH) Removable rear galvanized stakes (Body length approx. 2,560 mm) 3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container 6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame Galvanized extensions, extendable by approx. 230 mm per side Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor Checker plate coverings above the king pin and loading area...

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) Knedpshlz S Nefx Ag Eja • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light Knodpfxjtvfkfj Ag Esa - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: novo, lastna masa: 10.900 kg, največja dovoljena obremenitev: 37.100 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear bevel approx. 1,000 mm x 6° - Technical king pin load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading platform: - Loading platform, approx. 9,600 mm long with rear taper approx. 900 mm x 6° - Platform area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, with a load capacity of up to approx. 9,000 kg - Grating surface and steel sheet floor approx. 5 mm thick as additional reinforcement on the sloped section of the platform Ramps: - One pair of two-section AXS steel ramps, approx. 4,675 mm long and approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward - Painted sand coating on the outer frame and ramp tips - Flashing lights on the outer sides of the ramp tips with control switch next to the ramp operation panel - Ramp lock in transport position with quick-release fastener Kodpfxsuadk Nj Ag Ejna Axles, suspension and tires: - BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steerable (trailing) - 1st axle with traction assistance - Operated via brake pedal in the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 - TPMS tire pressure sensors installed on all wheels including spare wheels Brake system: - WABCO EBS-E braking system in accordance with EU regulations Paintwork: - Trailer MB 7350 Novagrau Equipment included: - Removable front steel wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations, except for hydraulic winches - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating with 5 mm steel underlay as additional reinforcement - Painted sand coating - Cutouts in the outer frame of loading platform and lift bed for hooking hydraulic ramp control valves on the right-hand side of the vehicle - 2" king pin - Central lubrication system with 1 pump, brand BEKAMAX - 1 pair of plug-in ALU side boards on the gooseneck, approx. 400 mm high, anodised - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Steel wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, lastna masa: 13.500 kg, največja dovoljena obremenitev: 51.500 kg, skupna masa: 69.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimizing loading platform length, length approx. 3,700 mm Gooseneck rear with chamfering approx. 1,000 mm x 10° Loading Platform: Telescopic loading platform, length approx. 8,800 mm, with rear chamfering approx. 500 mm x 10° Recess in the chamfer as well as into the loading platform to accommodate the excavator dipper stick Pneumatic locking with conical pin and reinforced locking positions Kedpek Ahugsfx Ag Eona Supply lines routed protected within the extendable beam, adapting to the respective platform length Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps individually adjustable hydraulically approx. 235 mm to the outside and approx. 215 mm to the inside Axles and Suspension: BPW axles and suspension, two rigid axles, two steering trailing axles Electromagnetic reverse lock, activated via reverse gear and manually Air suspension with lift and lower valve Axle tool Tyres: 235/75 R17.5 3PMSF twin tyres Load index: 143/141J (144/144F) Brake System: WABCO braking system, EBS-E in accordance with EU regulations Lighting System: 24-volt lighting system in "ASPÖCK-NORDIK full LED" Metalizing: Standard HRM metallization of the outer frame Complete steel structure shot-blasted, then visible defined surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) hot-refined Steel Construction: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified as per DIN-EN 287-1 MAG welding process according to EN ISO 4063 Shielding gas M21 as per EN ISO 14175 Accessories Included: Front wall made of steel, plug-in, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin 24N connection per ISO-11852, 24S connection per ISO-3731, 15-pin connection per ISO-12098 Round NATO socket on the front connection strip Cable to supply electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and tractor with connector (NATO-NATO) 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches 1 spare wheel with mounting adapter Outer beam of the gooseneck with fastening holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included One fastening hole in the rear upper area of the gooseneck's outer beam for a screwable lashing ring 1 pair of screw-in lashing rings Approx. 40 mm thick hardwood covering above the gooseneck On the gooseneck, 1 pair of plug-in side aluminium walls, approx. 400 mm high, anodized On the gooseneck, a plug-in aluminium rear wall, approx. 400 mm high, anodized 2" kingpin Gooseneck guide plate for fifth wheel, approx. 500 mm wide 4 wheel chocks with holder Holder for aluminium approach ramps Mechanical landing gear with 2-speed gearbox and crank Continuous hardwood floor approx. 50 mm thick on the loading platform, interrupted between axles Platform locking with conically welded locking profiles every 250 mm incl. tension plate Slotted holes at the front of the loading platform for attachable and adjustable bridging elements 1 intermediate table with recessed platform, approx. 300 mm wide for the draw-out tube with large cross-section, with sheet metal covering Front and rear with slotted holes

Stanje: novo, lastna masa: 17.500 kg, največja dovoljena obremenitev: 43.500 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, "SUPER LOW" design, approx. 7,550 mm long - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking device - Service lines are protected within the extendable beams and automatically adjust to the lowbed length Rear Undercarriage: - Rear chassis with closed outer frame, checker plate cover, and continuous prism-shaped excavator trough approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame Axles and Tires: - "PENDULUM AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 / 3PMSF Included Accessories: - Prepared for bolt-on container positioning for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel with holder - At the galvanized front adapter bar yellow-red air couplings - 4 wheel chocks - Remote rear steering from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles Kedpfx Agjh Hm The Eona - Hydraulic line connections from gooseneck to lowbed with multi-coupling instead of screw coupling - Electro-hydraulic power pack - White reflective tape to EU specifications on sides, extension, and rear red - 2 wooden blocks 500x250x200 mm - European reflective plates (red-yellow) on the trailer rear - At the gooseneck and rear wall left and right each a bracket for warning boards including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determination of axle loads including load diagram - On the gooseneck, plug-in ALU side and rear boards approx. 2,000 x 400 mm - The rear galvanized insert posts are removable (body length approx. 2,120 mm) - Separate air connection for air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Rear upper section of gooseneck closed with removable cover - 1 pair of steel ramps to bridge the lowbed's pick-up hooks - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm - Wireless remote control for rear steering in addition to cable remote, with signal lights at receiver for single-track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beams for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading bed - Foldable extensions, approx. 230 mm per side - Loading area features a painted sand layer for anti-slip protection - Dipper stick trough of rear chassis closed at front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)

Stanje: novo, lastna masa: 13.250 kg, največja dovoljena obremenitev: 47.550 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 245/70 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of flat lashing rings at the front of the loading area Cut-outs in the outer frame of the loading area for inserting tension straps Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp with hydraulically folding and unfolding parts, hydraulic lifting system, and hydraulically adjustable position. Maximum load per pair: 40,000 kg Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Braking system: Braking system according to EU regulations with EBS-E (4S3M) without connecting lines to tractor unit Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer High-quality one-color two-component (2K) top coat in Novagrau Rear section metallized and painted in RAL 9010 (pure white) Metallic paint not possible Knsdpfx Ajl Uxdkjg Eoa Electrical system: Electrical system according to EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connections conforming to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel headboard approx. 400 mm high At the galvanized front connection strip, yellow-red air couplings 4 wheel chocks with holders at the headboard One spare wheel with holder in front of the headboard Electro-hydraulic power unit Rear and front remote steering via cable remote control with push-buttons, with single-track control of the axles Bracket at rear of gooseneck for ALU drive-on ramps European reflector signs (red-yellow) at trailer rear White reflective tape according to EU regulations at the sides, at the extension, and red at the rear At the gooseneck and on the ramps left and right, each with a holder for warning signs including socket One holder for beacon at trailer rear Galvanized folding supports under the loading platform chamfer Ramp operating valves fitted on the right side of the trailer Cover plates to bridge the gap between ramps and loading platform One mudflap at trailer rear Manual and description on USB stick Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm The rear galvanized stakes are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350 x 400 x 400 on the gooseneck, box covers oil filler cap 4 pairs of WADER container pockets in the loading area for a

Stanje: novo, lastna masa: 9.500 kg, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, obratovalna teža: 9.500 kg, Oprema: ABS, Loading platform in extendable design: Loading platform with hardwood planks, rear bevel approx. 1,000 mm x 8° 1 pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of fold-out lashing rings on the outside (LC 5,000 daN) 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN) Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Brake system: Brake system as per EU regulations with EBS-E (2S2M) Paintwork: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer High-quality single-colour 2-component (2K) top coat in Nova grey Rear section metallized and painted in RAL 9010 (Pure White) No metallic paint possible Landing gear: JOST mechanical landing gear with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction from high-tensile fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Kodok Eammepfx Ag Eona Axles and tyres: BPW axles, air suspension, with disc brakes (377 mm), with lift/lower function Trailing steering axles with electro-magnetic reversing lock, actuated via reverse gear or manually Axle tool Tyres: 435/50 R 19.5 Accessories included: At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets 2" kingpin Galvanized steel front wall approx. 1,600 mm high, EN12642-XL White reflective tape to EU standards on the sides, extension section and red at the rear Loading platform with heavy-duty hardwood floor 9 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform 1 spare wheel holder under the platform on the right (direction of travel) Galvanized folding supports under the rear slope of the loading area Sliding mounting rails for ALU loading ramps at the rear of the vehicle European reflective plates (red-yellow) at the rear of the semi-trailer One mudflap at the rear of the semi-trailer Bracket for a rotating beacon at the rear of the semi-trailer At the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket One HDPE toolbox 620x360x610 under the platform on the left (direction of travel) 4 pairs of WADER container locks in the platform for 1x 20ft container or 1x 40ft container; additional locking position in the extension for a 45ft container 3 pairs of transverse stake pocket rails on the platform for 100 x 50 mm plug-in stanchions Lift axle on the front axle with control via TEBS E, depending on current axle load and loading condition Speed stickers 80 km/h on the rear and both sides Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Mounting for rotating beacon on warning boards Load gauge including axle load diagram HRM metallization (High Resistance Metallisation) of the outer frame Complete steel structure shot blasted, then specified visible surfaces metallized

Stanje: rabljeno, lastna masa: 11.950 kg, največja dovoljena obremenitev: 37.550 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, prva registracija: 02/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-piece steel ramps: - One pair of galvanized two-piece steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load per pair: 30,000 kg Loading platform: Kodpfjy Drdcox Ag Eona - Loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of externally foldable lashing rings - 3 pairs of externally foldable lashing rings - 1 pair of flat lashing rings at the front of the loading area - Approx. 48 mm thick hardwood flooring; tread plate surface above the axles Axles and wheels: - BPW axles and suspension; two axles fixed, one self-steering axle - Air suspension with raise/lower valve - Self-steering axles with electro-magnetic reverse lock, activated via reverse gear or manually - Tyres: 235/75 R17.5 3PMSF Accessories included: - 1 spare wheel with holder - TPMS tyre pressure monitoring system in accordance with ECE R 141 - 2" kingpin - One galvanized steel bulkhead - Yellow-red air couplings at the galvanized front connector rail - 4 wheel chocks with holders - Recess at the rear of the gooseneck for ALU access ramps - 3 heights of aluminum planks - Galvanized folding supports under the chamfer of the loading platform - A holder for a revolving beacon at the rear of the trailer - Height-adjustable tarpaulin structure (3,960 mm) - Galvanized front wall with a tensioning mechanism for the sliding curtain - Height adjustment possible by approx. 400 mm - "EDSCHA" branded roof, forward-slidable on aluminum roof beam profiles, bolted to front and rear walls - 3 pairs of sliding stanchions on the loading area - Structure hydraulically extendable at the rear by approx. 750 mm to the left and right - Sliding roof with pivotable portal beam - Sliding curtain with 700 mm length reserve, tension belts spaced approx. 600 mm apart - Height to top edge of structure approx. 3,960 mm - Driving with an open sliding roof is not permitted and will lead to damage of the tarpaulin - Cover plates to bridge the gap between ramps and loading platform - Electro-hydraulic unit at the rear, under the loading platform - At the gooseneck and ramps, left and right respectively, one holder for warning signs including socket - European reflective signs (red-yellow) at the rear of the trailer - 6 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading area - Lifting axle at the front axle with control via TEBS E depending on current axle load and loading condition - Grating surface in the chamfer of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm on the right in the direction of travel, between the axles - Painted sand layer on tread plates on the gooseneck and loading platform as anti-slip protection - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 - Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm - Axle load gauge including load diagram - HRM (High Resistance Metallisation) metallization of the outer frame - Entire steel structure shot-blasted, then all defined visible surfaces hot-finished in metallisation with ZINACOR 850 (zinc 85% - aluminum 15%)

Stanje: novo, lastna masa: 783 kg, največja dovoljena obremenitev: 2.193 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.300 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 900 mm, vzmetenje: drugo, velikost pnevmatike: 195/50 r13, *++++TAKOJ NA VOLJO+++* Tip: 3-stranski kiper Vključene rampe Vključene zgornje preklopne stranice 60 cm Mere: D x Š: 330 x 180 cm Skupna masa (kg): 3.000 – dvonadstropna prikolica z zavoro Višina tovorne površine (cm): Upravljanje: električna črpalka Nadgradnja: stranice – 30 cm Kedpsqwz Dvjfx Ag Eena Pnevmatike: 195/50R Če vam je bil isti priklopnik ponujen po ugodnejši ceni, vas prosimo, da nam ponudbo pokažete! Imate vprašanja? Pošljite nam sporočilo ali nas pokličite! Pridržujemo si pravico do tehničnih sprememb, sprememb cen, napak in predhodne prodaje. Za napake in tiskarske napake ne odgovarjamo.

Stanje: novo, lastna masa: 817 kg, največja dovoljena obremenitev: 2.683 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.300 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 900 mm, vzmetenje: drugo, velikost pnevmatike: 195/50 r13, *+++SOFORT VERFÜGBAR+++* Dieser Kipper ist der Preisleistungssieger in der Oberen Qualitätskategorie. Vom Bagger bis zu schweren Kies macht es diesem Anhänger auch mit leichter Überladung überhaupt nichts. Schnelles abkippen und eine gute Straßenlage machen diesen Anhänger aus. Typ: 3-Seitenkipper Inklusive Rampen Inklusive Aufsatzbordwände 60cm Pendelbar Maße: L x B: 330 x 180 cm Gesamtgewicht (kg):3.500 - gebremster Doppelachser Ladeflächenhöhe (cm): Knsdpjqwz Ivofx Ag Esa Bedienung: elektrische Pumpe Aufbau: Bordwände - 30 cm Reifen: 195/50R Sollten Sie den gleichen Anhänger zu einem günstigeren Preis angeboten bekommen, bitten wir Sie uns dieses vorzulegen !!! Sie haben Fragen, dann schicken Sie uns eine Nachricht oder rufen Sie uns an! Technische Änderungen, Preisänderungen, Irrtümer und Zwischenverkauf vorbehalten. Für Irrtümer und Druckfehler wird keine Haftung übernommen.