Polpriklopnik z nizko nakladalno ploščadjo

LANGENDORF 3 Achs Tieflader für Stapler Baum. LKW 7400 m/m

Stanje: novo, Leto izdelave: 2026, Wir verfügen über sämtliche europäische Dokumente! Wir können die Auflieger mit den Lieferkonditionen FOB, EXW, CPT, CFR und CIF liefern. Bei Interesse kontaktieren Sie uns bitte: Für europäische Länder: Nodoqx Nd Rjpfx Afaswk Für afrikanische Länder:

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, prva registracija: 09/2007, dolžina tovornega prostora: 15.350 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 350 mm, skupna širina: 2.550 mm, vzmetenje: zrak, Leto izdelave: 2007, Oprema: ABS, = Dodatne možnosti in oprema = - Zračno vzmetenje Nsdpfx Afjynil Doaowk - Centralno mazanje = Dodatne informacije = Konfiguracija osi Vzmetenje: zračno vzmetenje Zadnja os 1: dvojna montaža; Maks. osna obremenitev: 9.000 kg; Krmiljena Zadnja os 2: dvojna montaža; Maks. osna obremenitev: 9.000 kg; Krmiljena Teže Lastna teža: 19.240 kg Nosilnost: 18.760 kg Skupna dovoljena masa: 38.000 kg Funkcionalnost Izvlečna nadgradnja: Da Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Finančne informacije Cena: Na zahtevo Dodatne informacije Za več informacij se obrnite na Davida F Middelmana.

Stanje: novo, največja dovoljena obremenitev: 44.000 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Further information here: Njdpfx Asv D Abtofajwk

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Nedpfxehlz S Ne Afajwk Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: rabljeno, lastna masa: 11.300 kg, največja dovoljena obremenitev: 29.700 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2006, vzmetenje: zrak, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, * German semi-trailer * Special low-loader for transporting commercial vehicles and construction machinery * Manufactured by premium Dutch builder Estepe (Estepe type E0PL 24-41) * Years of experience in building such specialized low-loaders for truck and construction machinery transport – every detail considered * Naturally equipped with extendable low-bed, hydraulic ramps, and hydraulic platform * Special winch with remote control, etc. * BPW axles * 3rd axle - lift axle * Air suspension with lift/lower function * Central lubrication system * Gross vehicle weight: 41,000 kg * Unladen weight: 11,300 kg * Payload: 29,700 kg Should you require a new TÜV inspection, we will gladly provide a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV certification, new SP, or new UVV. You can find more trucks on our website at Nodpfx Afjrtbb Soaowk We speak the following languages: German, English, Polish, Turkish Note: We strongly advise and recommend viewing and inspecting the goods to avoid any misunderstandings regarding condition and suitability. Viewing and inspections are possible and expressly welcomed at any time by appointment. All details are provided without guarantee. We do not accept liability for errors or inaccuracies in the offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Nwjdpfx Aeiu Er Ajfajk Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 680.000 km, moč: 537 kW (730,12 KM), prva registracija: 08/2015, vrsta goriva: dizel, konfiguracija osi: 6x2, gorivo: dizel, zavore: retarder, barva: modra, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 10.500 kg, dovoljena osna obremenitev (os 3): 8.500 kg, dolžina tovornega prostora: 6.350 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2015, Oprema: ABS, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, navigacijski sistem, parkirni grelec, retarder, spojka prikolice, tempomat, žerjav, = Dodatne možnosti in oprema = - Aluminijasti rezervoar za gorivo - Tiho delovanje - Intarder - Hladilnik - Lahka aluminijasta platišča - Zračno vzmetenje - Zračni trobljač - Senčnik - Stacionarno ogrevanje - Škatla za orodje - Ksenonska razsvetljava - Priključna gred (PTO) - Centralno mazanje - Vlečno kljuko = Dodatne informacije = Konfiguracija osi Največja dovoljena obremenitev sprednje osi: 9.000 kg Zadnja os 1: Največja obremenitev osi: 10.500 kg; Vzmetenje: zračno Zadnja os 2: Dvojna montaža; Dvižna os; Največja obremenitev osi: 8.500 kg; Vzmetenje: zračno Teže Lastna masa: 15.100 kg Nwsdpfx Afewtfvwoaok Nosilnost: 12.900 kg Največja dovoljena masa: 28.000 kg Funkcionalnost Znamka nadgradnje: Palfinger PK 18502-SH E CE oznaka: da Stanje Tehnično stanje: zelo dobro Optično stanje: dobro Identifikacija Registrska oznaka: 10-BXP-5

Stanje: rabljeno, prevoženi kilometri: 738.234 km, moč: 324 kW (440,52 KM), prva registracija: 07/2012, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: zelen, vrsta prenosa: mehanski, emisijski razred: Euro 5, Leto izdelave: 2012, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, Crane tractor unit (articulated truck) MAN TGX 26.440 6X2 Euro 5 EEV, with retarder and dual-circuit hydraulics. Trailer: Meusburger MPS-2 with steered axles, equipped with Palfinger PK 26002-EH crane, 4 hydraulic extensions, lifting capacity: 5,500 kg at 4 m, 1,750 kg at 12 m, radio remote control. Condition: very good, regularly serviced, valid MOT (vehicle inspection). Tyres: 70-95% tread remaining. Nedsnwggpspfx Afajwk

Stanje: rabljeno, največja dovoljena obremenitev: 36.540 kg, skupna masa: 48.500 kg, konfiguracija osi: 3 osi, prva registracija: 06/2020, naslednji pregled (TÜV): 08/2028, Leto izdelave: 2020, Oprema: ABS, Notranja številka vozila: G400133 Takoj na voljo na našem dvorišču v Kaufungenu. Več informacij: * Luis Lucena * Viktoria Sologubova Nemščina Langendorf SATÜ 30-10,0 M nizkopodvozna prikolica | 3 osi | Niše za kolesa | 36.540 kg nosilnosti Naprodaj je rabljena nizkopodvozna prikolica Langendorf SATÜ 30-10,0 M, izdelana leta 2020. Prikolica ima niše za kolesa, daljinsko upravljanje ter tri osi, od tega sta dve krmiljeni in ena dvigljiva. Z 10.000 mm dolgo nakladalno površino in tehnično nosilnostjo 36.540 kg je ta nizkopodvozna prikolica idealna za transport gradbenih strojev, viličarjev, bagrov in druge težke opreme. Tehnični podatki: * Proizvajalec/model: Langendorf SATÜ 30-10,0 M * Vrsta vozila: Nizkopodvozna prikolica * Prva registracija: 06/2020 * Leto izdelave: 2020 * Osi: 3 * Dve krmiljeni osi Njdpjy A Uxaefx Afajwk * Ena dvigljiva os * Skupna dolžina: 13.900 mm * Dolžina nakladalne površine: 10.000 mm * Tehnično dovoljena skupna masa: 48.500 kg * Lastna teža: 11.960 kg * Nosilnost: 36.540 kg * Niše za kolesa * Daljinsko upravljanje * Tehnični pregled: Nov * Številka vozila: G400133 * Stanje: Rabljeno * Nemško vozilo Ogled je možen po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke vam z veseljem posredujemo na zahtevo. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. Angleščina Langendorf SATÜ 30-10.0 M Nizkopodvozna prikolica | 3 osi | Niše za kolesa | 36.540 kg nosilnosti Rabljena nizkopodvozna prikolica Langendorf SATÜ 30-10.0 M, izdelana leta 2020. Ta prikolica ima niše za kolesa, daljinsko upravljanje in tri osi, vključno z dvema krmiljenima osjama in eno dvigljivo osjo. Z 10.000 mm dolgo nakladalno površino in tehnično nosilnostjo 36.540 kg je ta nizkopodvozna prikolica idealna za transport gradbenih strojev, viličarjev, bagrov in druge težke opreme. Tehnični podatki: * Proizvajalec/model: Langendorf SATÜ 30-10.0 M * Vrsta vozila: Nizkopodvozna prikolica * Prva registracija: 06/2020 * Leto izdelave: 2020 * Število osi: 3 * Dve krmiljeni osi * Ena dvigljiva os * Skupna dolžina: 13.900 mm * Dolžina nakladalne površine: 10.000 mm * Tehnično dovoljena skupna masa: 48.500 kg * Lastna teža: 11.960 kg * Nosilnost: 36.540 kg * Niše za kolesa * Daljinsko upravljanje * Tehnični pregled: Nov * Kataloška številka: G400133 * Stanje: Rabljeno * Nemška prikolica Ogled je možen po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke vam z veseljem posredujemo na zahtevo. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. Finančni primer: * Notranja številka: G400133 * Nakupna cena: 57.900,00 € * Akontacija: 10% * Obdobje: 60 * Mesečna rata: 899,02 € * Končna vrednost: 11.380,00 € Če vas ponudba zanima ali jo želite prilagoditi vašim potrebam, nas kontaktirajte (g. Enchev). Veselimo se vašega klica. Pridržujemo si pravico do sprememb. Z veseljem sprejmemo vaše rabljeno vozilo v odkup. Financiranje je možno neposredno pri nas. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemščina, angleščina, španščina, poljščina, ukrajinščina, ruščina, bolgarščina.

Stanje: rabljeno, prevoženi kilometri: 600.506 km, moč: 324 kW (440,52 KM), prva registracija: 03/2009, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 4, skupna širina: 2.550 mm, skupna višina: 3.700 mm, dolžina tovornega prostora: 6.350 mm, širina tovornega prostora: 2.500 mm, Oprema: klimatska naprava, žerjav, Telefon: pokličite (Kontakt · Telefon · Mobilni · WhatsApp) * MAN TGS 26.440 6x4H-2 BL Hydrodrive * Keson i zadnja dizalica * Prednja osovina lisnato ogibanjem * Zadnja osovina vazdušno ogibanjem * Treća osovina podizna i upravljiva * Retarder sa 6 stepeni * Automatska klima * Električni podizači prozora * FIN : WMA35SZZ89M541396 * Tip motora : D2066LF36 * Snaga : 324 kW * Euro 4 * Zapremina : 10,518 cm³ * Neto masa : 14,840 kg * Nosivost : 11,085 kg * Ukupna masa : 26,000 kg * Zapremina : 10,518 cm³ * Međuosovinsko rastojanje : 4,800 / 1,350 mm * Dužina sanduka : 6,350 mm * Dužina vozila : 9,800 mm * Širina vozila : 2,550 mm * Visina vozila : 3,700 mm * Gume : 385 / 65 R 22,5 * ----Palfinger PK 23002 Performance Nodorwv Dcopfx Afaswk * Daljinski upravljač * 4 hidraulične sekcije * Serijski broj : 100105422 * Godina proizvodnje : 2008 * ----TÜV 03/2023 * Cena bez PDV-a * Sve navedene informacije su bez garancije