Müller-Mitteltal Ts3 Hydr Rampen Gigant Luft nakup rabljenega (3.881)

Stanje: rabljeno, največja dovoljena obremenitev: 30.850 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 07/2014, dolžina tovornega prostora: 9.650 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 12.250 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Oprema: ABS, Nizkopodvozna prikolica T4 RM 40.0 z nišami za kolesa: spredaj – (D x Š x V) 1900 x 670 x 320 mm, zadaj – (D x Š x V) 1200 x 670 x 210 mm, dolžina tovornega prostora: 6960 mm, možnost razširitve na 3000 mm, višina tovornega prostora: pribl. 920 mm, naklon zadaj: 870 mm, višina zgornje plošče 1500 mm / prednji prostor za shranjevanje pribl. (D x Š) 500 x 2200 mm, 7 x močne pritrdilne točke na vsaki strani / + 2 para na sredini, niša za roko bagra / (D x Š) 2500 x 730 mm, stranske dvižne rampe, ki se premikajo vstran (D x Š) 2900 x 720 mm z vzmetnim dvižnim mehanizmom / pocinkano, okrogla opozorilna luč, 50 mm kroglična prikolica, kamera za vzvratno vožnjo, ABS, EBS, osi SAF, bobnasta zavora, vzmetenje s listnatimi vzmetmi, vozilo se lahko oblije z reklamnimi grafikami in/ali označuje z logotipi. SI87185 Njdpfxjzw Sfkj Ab Djwl Naša ponudba na splošno ne vključuje novega tehničnega pregleda (TÜV). Če želite nov tehnični pregled, vam z veseljem pripravimo ponudbo naših partnerskih servisov! Vozilo se lahko oblije z reklamnimi grafikami in/ali označuje z logotipi. Veljajo naši splošni pogoji dostave in plačila. Z veseljem vam pripravimo ponudbo za financiranje ali lizing tega vozila. Prosimo, stopite v stik z nami!

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, ETÜ-TA-R 19.0 ---- Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: Nsdpfxepk D Nco Ab Dowl * Air suspension with manual lowering at the rear ---- Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ---- Electrics / Lighting: * Tire Pressure Monitoring System (TPMS) * 15-pin power connector * LED tail lights ---- General Attachments: * Jost landing leg at the front * External folding support legs at the rear * Toolbox made of galvanized sheet steel approx. 650 x 350 x 320 mm, fitted on the right side (black powder-coated) * Side underride protection * Plastic quarter mudguards ---- Low Loader Platform: * Reinforcement package for drilling rig transport on the chassis – loading height +20 mm * 50 mm softwood floor in clamped design * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel sheet, foldable with board wall spring-assisted lifter * Steel rear wall, can be inserted between the ramps – storage bracket in front of the bulkhead when not in use * Rear stakes bolted ---- Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * Each front and rear corner with 1 x 10 t lashing ring; various holes in the headboard and end cross member for 1.2 t lashing options ---- Ramps: * One-piece mechanical steel grating ramps with spring assistance for one-man operation, approx. 2,750 x 620 mm (can be retracted to 20 mm) * Rear access slope approx. 860 mm ---- Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ---- Painting: * Chassis, drawbar, headboard, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air reservoirs, and landing leg painted in black * Side boards painted in RAL 9010 pure white * Side walls can be painted in any RAL color for a surcharge ---- Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ---- Delivery time: * Immediately available from Egestorf

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 04/2005, barva: črn, Leto izdelave: 2005, Oprema: ABS, = Dodatne možnosti in dodatna oprema = - Rezervno kolo - Centralno podmazovanje - Dvojni pnevmatiki = Opombe = Müller Mitteltal, dvovosni priklopnik T5 2AL s platformo in rampo Zračna vzmetitev BPW osi ABS ZSA Pnevmatike: 60 % GR 235R17,5 IDNR 665 Z veseljem vas pričakujemo za posvet, podpis pogodbe ali prevzem vozila v našem avtosalonu. Prosimo, dogovorite se za termin. Če se ne morete osebno obiskati našega avtosalona, vam ponujamo celoten postopek prek telefona/e-pošte/WhatsApp/faksa. Po želji vam dostavimo novo vozilo neposredno do vaših vrat. To pomeni najboljšo ceno, maksimalno varnost in udobje pri nakupu avtomobila. Prevzem starega vozila Zelo radi sprejmemo vaše rabljeno vozilo v račun. Ponujamo možnost digitalne ocene vozila na podlagi fotografij vašega vozila, tudi brez obiska avtosalona. Naša specializirana ekipa za odkup vam ponuja zagotovljeno najvišjo ceno. Po želji vam dostavimo vaše novo rabljeno vozilo po vsej Nemčiji neposredno do vaših vrat in prevzamemo vaše rabljeno vozilo. Financiranje – lizing Takojšnja potrditev in prevzem obstoječega kredita. Vaš specializirani partner za osebna vozila, kombije, gospodarska vozila in gradbene stroje. Nsdpfoxw T Uajx Ab Dewl ITC Gmbh & Co KG Siemensstaße: 7 32312 Lübbecke (industrijsko območje) Obiščite nas na naši spletni strani: Vedno več kot 400 vozil na zalogi. Podatki v oglasih, na internetu, cenovnih tablicah in fotografijah so nezavezujoči opisi in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne prevzema odgovornosti/garancije za tipkarske in prenosne napake. Izpostavljena oprema mora kupec po potrebi dodatno preveriti. Naša ponudba običajno ne vključuje novega tehničnega pregleda, vendar vam z veseljem pripravimo ponudbo naše partnerske delavnice. Pridržana napaka in možnost predčasne prodaje. = Dodatne informacije = Lastna teža: 8.900 kg Nosilnost: 26.100 kg Največja dovoljena masa: 35.000 kg Prodajna cena: 16.999 €, 19.740 US$

Stanje: rabljeno, prevoženi kilometri: 1.100 km, vrsta prenosa: drugo, barva: rumena, skupna masa: 32.000 kg, lastna masa: 6.210 kg, največja dovoljena obremenitev: 25.790 kg, velikost pnevmatike: 425/65R22.5, prva registracija: 06/2012, vzmetenje: zrak, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, air suspension, first axle liftable, ABS (anti-lock braking system), side under-run protection Body: LIEBHERR concrete mixer type HTM 1004, approx. 10 m³, 2x BPW axles, disc brakes, first axle liftable! Nsdpfei Rk Epox Ab Dewl ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stanje: rabljeno, številka stroja/vozila: GE11/142/2022, lastna masa: 6.350 kg, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2008, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, Zelo dobro ohranjeno vozilo iz prve roke Trosnažni nizkopodni priklopnik za prevoz Nwsdpfxsn Aw Hkj Ab Dol Nizkopodni priklopnik z nakladalno rampo Prevoz težkih tovorov Tip T3 Komakt 30,0 Dolžina 8500 mm Širina 2500 mm Zračno vzmetenje Neto cena za trgovino/izvoz – 15.990 € Pridržujemo si pravico do sprememb, vmesne prodaje in napak ===== Telefon2 Mobilni telefon =====

Stanje: novo, največja dovoljena obremenitev: 23.210 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * Zavorno sistema EBS * Naprava za sprostitev v sili za cilindrične vzmetne akumulatorje * Bobnaste zavore * 3 x 11 ton, osi BPW Eco Njdjq Dyv Ispfx Ab Djwl * Listnate vzmeti * mehanski izravnalnik osi zadaj * stranski odbijač * vrtljive opore zadaj na okvirju voznega podvozja * mehansko nastavljivi paketi opozorilnih tabel spredaj in zadaj * sprednji zaprti plastični blatniki in zadnji ravni pocinkani jekleni ščitniki, opremljeni s ščitniki proti brizganju * odsevni trak ob strani in zadaj * pokrov (vroče pocinkan), za orodjarno v platformi podvozja * orodjarna iz pocinkane jeklene pločevine, cca 650 x 300 x 600 mm – črna, prašno lakirana – na strani pod vozilom * 15-polni vtič * LED osvetlitev 12 / 24 V * LED rotacijska luč (snemljiva) zadaj * vlečna prikolica s 40 mm vlepno palico in nastavitvijo višine s pomočjo vzmeti in zapornega mehanizma * na vsaki strani 4 žepov za pritrditev (vendar brez pritrdilnih palic), hkrati možnost pritrjevanja * Paket La-Si, sestavljen iz: 2 vlepnih palic (6,4 t) spredaj levo in desno na glavnem okvirju platforme podvozja * 5 parov UVV pritrdilnih obročev, vrtljivih in spuščajočih * obremenitev v vse smeri, vgrajeno v zunanji okvir v kotih, 13,4 t, sicer 10 t * 6 parov mehanskih iztegnjenih podstavkov za 3 m celotne širine (vendar ne na zadnjem nagibu) * podaljševalne deske pod tovorno površino, shranjene v predalu * nosilec za žlico bagra, ki sega od zadnje osi do zaključnega nosilca, dolžina cca 2.100 mm (2 para 6,4 t pritrdilnih obročev na strani nosilca za žlico bagra) * hidravlične iztegnjene rampe (cca 4.650 x 720 mm) z hidravlično iztegnljivim končnim delom in varnostnimi ventili za zadrževanje tovorja, hidravlični bočni premik ramp * hidravlični razdelilnik pretoka v prikolici (pri hidravlični moči črpalke v tovornjaku nad 40 l do največ 140 l/min), dvojna hidravlična povezava * tovorna površina nad vrtljivim obročem: cca 1.960 x 2.520 mm * zadnja tovorna površina: cca 6.500 x 2.520 mm (vključno z 860 mm nagibom za vožnjo) * višina tovora cca 860 mm +/- 30 mm kompenzacijski agregat * podvozje, vrtljiv obroč, iztegnjeni podstavki, zadnje opore in iztegnjene rampe, vroče pocinkane. * osi, vzmeti, vlečna prikolica, zračni rezervoar itd., lakirane v črni barvi. * Novo vozilo z garancijo proizvajalca. * Pridržujemo si pravico do sprememb in napak. * Na voljo takoj, dobava iz Egestorfa.

Stanje: novo, vzmetenje: drugo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Storage compartment for aluminium ramps, price per compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm, -- printing errors, mistakes and changes reserved, sample images --, For more data see: !, More details: ! Nodpjz E D Rrofx Ab Dswl

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display option in the truck via EBS signal - no truck-side installation required * Warning sign packages, front and rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V 15-pin as well as additional 12 V 7+4-pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design on right side Nodpol Th Evsfx Ab Dswl * Enclosed single plastic mudguards at the front * Straight steel mud flaps at the rear each with splash protection (spray suppression) * Side underrun protection * Extended offset cranking by 500 mm forward * Kingpin platform extension by 520 mm with 45° angled corners and 3 recessed lockable storage compartments with lid * Chassis made from high-strength fine-grained steel * Flooring over turntable platform made of 50 mm and in low-bed platform made of 60 mm softwood * Outer boards of the drive-on ramps made of 50 mm bamboo wood * Four stake pockets per side (stakes not included) with integrated 2 t lashing point * Load securing package (Lasi package) including: 2 lashing eyes (6.4 t) front left/right on the main frame of the turntable platform; on both sides, front and rear, 1 pair of 13.4 t lashing rings on the outer frame, 4 pairs per side of 10 t swivel and drop lashing rings, loadable in all directions and integrated into the outer frame; 2 pairs of 6.4 t lashing rings per side in the excavator stick tray; 8 pairs of galvanized folding extensions for total width of 3 m (not at the rear angled section) * Side extension planks stored on the left in a compartment * Excavator stick rest above rear axle up to the end of approach slope, approx. 2,300 x 740 x 190 mm * Mechanical drop supports at rear * Hydraulic, hot-dip galvanized drive-on ramps approx. 3,000 x 720 mm * Hydraulic side ramp shifting on sliding tube from ramp axle * Loading area above kingpin: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach slope) * Chassis, kingpin platform, drive-on ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks, and kingpin painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 11.050 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-loader Three-way Tipper Trailer with Ramps * NEW VEHICLE * Now immediately available in RAL 9016 Traffic White * Leasing, financing, and trade-in of your old trailer possible * Reference number for inquiries: 11654 * Remote diagnostic unit with display option in the truck via EBS signal * Side marker lights with indicator function * GVW: 14,400 kg, Payload: 11,050 kg * EBS 2S/2M * Galvanized floor, 5m x 2.42m x 0.5m, laser-welded drop sides, swinging, foldable, and removable, prepared for later retrofit of side extension panels * Lockable compartment under the tipping bridge for approach ramps * Incl. 1 pair of aluminium loading ramps, 8t per pair, 3.57m * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lash rings LC 5000daN at front and rear + 8 lashing eyes LC 3000daN recessed and foldable in the tipper floor (centrally positioned) * Excavator bucket rest made of hardwood * 2-step access in front of front wall (hot-dip galvanized) * Drawbar infinitely height-adjustable, hot-dip galvanized, towing eye 40mm * Wide tires 385/55R 19.5 (4 units), parabolic springs * Net hooks, rear stanchions bolted, hot-dip galvanized * Cables for the rear drop side * Plastic toolbox on the right side of the chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer * Hire purchase price: * e.g. €560 for 60 months with no down payment and no residual value. Offer from our financing partner "FM LeasingPartner." Other terms with/without residual value or down payment possible * Request your personal quote! * We are official Müller-Mitteltal sales partners * Delivery free to your site available with timely order! ----Our Opening Hours Nwjdpfsyvxg Isx Ab Del Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 We are also available by appointment outside of these hours We speak German, English, Polish, and French. WhatsApp

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) Nwjdpfepk D I Asx Ab Dsl ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026

Stanje: novo, največja dovoljena obremenitev: 23.210 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * Zavorno sistema EBS * Naprava za odklepanje zavor v primeru izrednih razmer za cilindrične zavorne zavornice * Bobnaste zavore * 3 x 11 ton BPW osi Eco * Listne vzmeti * mehanična poravnava osi zadaj * stranski zaščitni element * vrtljiva opora zadaj na okvirju * mehansko nastavljivi opozorilni znaki spredaj in zadaj * sprednji, zaprt plastični blatnik ter zadnji, ravno upognjen jeklen zaščitni element z zaščito proti brizganju * odsevni trakovi ob straneh in zadaj * pokrov (prevlečen s cinkom) za orodjarno na platformi podvozja * orodjarna iz pocinkanega jekla, pribl. 650 x 300 x 600 mm - črna, prašno lakirana - nameščena ob strani podvozja * 15-polni električni vtič * LED-osvetlitev 12 / 24 V Nwsdpjtplwfsfx Ab Dol * LED-rotacijska luč (odstranljiva) zadaj * vlečna priprava s 40 mm vlecno palico in nastavitvijo višine s pomočjo vzmetne palice in zapornice * ob straneh po 4 žepov za pritrditev (vendar brez pritrdilnih palic), hkrati omogočajo pritrditev z jermeni * paket La-Si, sestavljen iz: 2 pritrdilnih točk (6,4 t) spredaj levo in desno na glavnem okvirju platforme podvozja * 5 parov UVV pritrdilnih obročev, vrtljivih in spustljivih * obremenljiv v vseh smereh in vgrajen v zunanji okvir, v kotih 13,4 t, sicer 10 t * 6 parov mehanskih raztegnih opor za 3 m celotne širine (vendar ne na zadnjem nagibu) * plošče za širitev pod tovorno površino, shranjene v predalu * podpora za roko bagra čez zadnjo os do zaključnega nosilca, dolžina pribl. 2.100 mm (2 para pritrdilnih obročev 6,4 t ob strani na podpori za roko bagra) * hidravlične raztegljive rampe (pribl. 4.650 x 720 mm) s hidravlično raztegljivim končnim delom in varnostnimi ventili za zadržanje tovora, hidravlična stranska premika ramp * hidravlični razdelilnik pretoka na prikolici (pri hidravlični moči črpalke na tovornjaku nad 40 l/min do maks. 140 l/min), hidravlični sistem z dvema vodoma * tovorna površina nad vrtljivim obročem: pribl. 1.960 x 2.520 mm * zadnja tovorna površina: pribl. 6.500 x 2.520 mm (vključno z 860 mm nagibom) * višina nakladanja v obremenjenem stanju pribl. 860 mm +/- 30 mm kompenzacijski agregat * podvozje, podvozna plošča, raztegnite opore, opore zadaj in dostopne rampe, prevlečene s cinkom. * osi, vzmeti, vlečna priprava, zračni rezervoar itd., črne barve. * Novo vozilo s proizvajalčevo garancijo. * Pridržujemo si pravico do spremembe cen in razpoložljivosti. * Na voljo takoj iz Egestorfa.

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle compensation ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS Tire Pressure Monitoring System * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable warning beacon * 15-pin power connector ----General Equipment: * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning panel kits front and rear * VA closed plastic mudguards in front and straight galvanized steel skirts at the rear, each with spray protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox in the turntable platform * Four stake pockets per side (stakes not included), also with lashing function ----Load Securing (La-Si package consisting of): Nodpfxsl Th Nns Ab Djwl * 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 6 pairs of UVV folding and retractable lashing rings, loadable in all directions and countersunk into the outer frame * 13.4 t at corners, 10 t otherwise ----Widening: * 6 pairs of manual folding outrigger arms for 3 m overall width (not on the sloped rear section) * Widening boards stowed in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way hydraulic control unit pre-installed for optional hydraulic side shift of ramps ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry incline) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Finish: * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex stock Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, ETÜ-TA-R 19.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar / Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * Outward folding rear supports * Tool box made of galvanized steel sheet, approx. 650 x 350 x 320 mm, mounted on the right side (powder-coated black) * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drill rig transport on the chassis – loading height +20 mm * 50 mm softwood floor, clamped design * Preparation in front of the front wall for subsequent installation of container locks * Bolted smooth steel front wall * Fold-down trapezoidal-profile steel side walls with board-lift assist * Steel rear wall, slidable between ramps – storage bracket for unused position inside, in front of the headboard * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * Front and rear corners each fitted with 1 x 10 t lashing ring; multiple holes for 1.2 t lashing options in front and rear crossmembers ----Ramps: * One-piece, mechanical grate ramps with spring system for single-person operation, approx. 2,750 x 620 mm (retractable to 20 mm gap) Nwodpfjpk D D Hex Ab Del * Rear access angle approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in a shade of black * Sideboard painting in RAL 9010 pure white * Painting of side walls in an individual RAL color available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved ----Delivery time: * Immediately available from Egestorf

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2015, = Dodatne možnosti in dodatna oprema = - Zračno vzmetenje zadaj - Zračno vzmetenje spredaj - Centralno mazanje = Opombe = GOVORIM PO RUSKO - Yuriy, mobilna številka: 3-osni nizkopodvozni priklopnik, ki ga je mogoče prevoziti. Priklopna platforma, približno 3.900 x 2.550 mm, z aluminijastimi stranskimi stenami, nizkopodvozna platforma, približno 9.050 x 2.550 mm, 4 vdolbinice za kolesa z izvlečnimi deli, vdolbinice spredaj, približno 390 mm, zadaj, približno 290 mm, medosna razdalja, približno 3.100 mm, nosilec za roko bagra. Višina nakladanja, približno 900 mm. 34 pritrdilnih točk, zložljive razširitve na 3.000 mm, opozorilni paket za presežne dimenzije. Hidravlične rampe, dvodelne, približno 4.300 x 720 mm, z gumijasto oblogo, hidravlično premikljive, BPW osi, 3 osi, hidravlično prisilno krmiljenje, vključno z daljinskim upravljalnikom, EBS, zračno vzmetenje, dvižna os. Dovoljena skupna masa 48.000 kg, masa na priklopno glavo 18.000 kg, nosilnost 35.350 kg. Kraljevski vijak 2 palca, višina priklopne glave, približno 1.250 mm. Orodjarna na priklopni platformi. Pnevmatike 235-75R17.5. Dvojni zračni sistem, hidravlična črpalka. Centralno mazanje. Barva: MB 5361, encijan modra. Tehnični pregled veljaven do 07-2027. = Dodatne informacije = Lastna masa: 12.650 kg Nosilnost: 35.350 kg Dovoljena skupna masa (zGG): 48.000 kg Pnevmatike spredaj: 235-75R17.5 Pnevmatike zadaj: 235-75R17.5 Država proizvodnje: DE Za dodatne informacije se obrnite na Jana-Marca Schwickerta. Nwjdpfx Abezq Rg He Del

Stanje: novo, največja dovoljena obremenitev: 13.490 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, TRA-Kombi 18,0: * 3 v 1 = za transport zabojnikov za odlaganje, zabojnikov za odvoz in kot nizkopodna prikolica ----Zavore: * EBS-E (električni zavorni sistem) * Naprava za izredno sprostitev zavor za vzmetne akumulatorje * Bobnaste zavore ----Os * 2 x 10,5-tonske osi Gigant Nsdpfxowb Rako Ab Dswl ----Vzmetenje: * Zračno vzmetenje z ročnim spuščanjem zadnje osi ----Vlečna priprava: * Pnevmatično spuščana vlečna priprava, dolžine 2.100 mm, z vlečnim ušesom 40 mm in napravo za nastavitev višine ----Elektrika / Osvetljava: * Sistem za nadzor tlaka v pnevmatikah (RDÜ), možnost prikaza na tovornjaku preko signala EBS (brez vgradnje na tovornjaku) * LED zadnje luči 12 / 24 V * 15-polni priključek ----Splošni dodatki: * Orodjarna omara iz prašno lakirane jeklene pločevine * Nosilec rezervnega kolesa na desni strani karoserije * Zaprt stranski zaščitni element * Plastični četrtni blatnik z zaščito proti brizganju * Plastični zaščitni odbijač na zadnji strani * Zložljiva opozorilna tabla na zadnji strani ----Tovor * Vroče pocinkana glavna konstrukcija z dvignjenim zunanjim okvirjem za vodenje zabojnikov * Jeklena pločevina z vdolbinami za valje v območju podvoza * Pri transportu zabojnikov za odlaganje je mogoča dolžina tovornega prostora 5.500 - 7.000 mm * Pnevmatična 4-delna zapornica in mehanski vtični oporni kot spredaj na tirnici * Možen transport do 2 zabojnikov za odlaganje z največjo prostornino 10 m³ * 8 zamenljivih opornih elementov za stransko centriranje zabojnikov, sprednji 4 oporni elementi so vtični in pomični * Varilna črta kot protidrsna prevleka v območju tirnice * Mehanske oporne noge zadaj ----Varnost tovorja: * 3 pari 10-tonske UVV pritrdilne točke na strani za pritrditev napenjalnih elementov za varno pripenjanje zabojnikov, vsaka točka ima 4 pritrdilne zanke v obliki deteljice (stransko) * 1 par 13,4-tonske UVV pritrdilne točke spredaj * Na vsaki strani 4 x 8-tonske pritrdilne zanke, vgrajene v zunanji okvir ----Rampe: * Alumijaste naloževalne rampe (10,6 tone / par), 2.800 x 470 mm, primerne za vozila z gumijastimi in goseničnimi pogoni (zaklenjen prostor za shranjevanje zadaj) ----Barvanje: * Reflektirajoča stranska in zadnja oznaka * Okvir vroče pocinkan * Os, vlečna priprava, barvani v črno ----Informacije: * Potrdilo o varnosti tovorja v skladu z DIN 30722-1 * Potrdilo o varnosti tovorja v skladu z DIN EN 12195-1, DIN EN 12640, DIN EN 12642 in VDI 2700 * --Možna največja dovoljena masa 20.000 kg-- * Novo vozilo brez prve registracije z garancijo proizvajalca * Pridržujemo si pravico do sprememb in napak ----Dobavni rok: * Takoj na voljo iz Egstorfa

Stanje: novo, največja dovoljena obremenitev: 23.920 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NOVO VOZILO Fliegl 3-osni nizkopodni priklopnik tipa DTS 300, vroče pocinkan Skupna masa 24.000 kg / 30.000 kg Nosilnost 17.920 kg / 23.920 kg Lastna teža 6.080 kg Skupna dolžina 10.900 mm Nakladalna dolžina 8.680 mm Nakladalna površina 6.500 mm vključno z 900 mm nakladalnim nagibom Parabolično vzmetenje Dolge rampe 2.800 mm s hidravličnim upravljanjem Razširitev na 3.000 mm z opozorilnimi tablami in rotacijsko lučjo Velik komplet za pritrjevanje z zateznimi točkami 5,0 in 10,0 ton 5 parov žepov za nosilce Vlečni obroč 40 mm Nsdpfxexb Nmye Ab Djwl plus prevoz/stroški priprave iz skladišča Wiesmoor 1.280,00 €/neto Ponudba najema z odkupom: doba 48 mesecev, preostala vrednost 40 %, predujem samo DDV. Mesečna najemnina: 500,00 EUR

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Braking System: * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Towing Eye: * Drawbar height-adjustable by 300 mm * 40 mm flange towing eye ----Electrics / Lighting: * TPMS (tire pressure monitoring system with indicator function in the truck via EBS signal—no installation required on the truck side) * LED lighting system * 15-pin electrical connector ----General Accessories: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floorboards * Preparation for subsequent installation of 20" container locks at front and rear * Bolted, smooth sheet metal front wall * Side walls made of trapezoidal-profiled steel, foldable with drop-side spring assist * Hot-dip galvanized bolt-on rear stanchions ----Load Securing: * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing points every 480 mm * Option for 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and end crossmembers for 1.2 t securing points ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, stored in a compartment underneath the loading area in the chassis, accessible from the rear Nsdpfx Abjndpn Ss Dewl ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Entire vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Braking System: * EBS Electronic Braking System * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles Nedpfjpk Dv Rox Ab Dowl ----Suspension: * Air suspension ----Tow Bar / Flange Towing Eye: * Height-adjustable tow bar, adjustable by 300 mm * Tow bar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * Tire pressure monitoring system (TPMS) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right side of the headboard * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Trapezoidal profiled drop-side walls made of steel, foldable with drop-side spring assist * Steel rear wall insertable between ramp mounts; when not in use, stowed inside in front of the headboard * Bolt-on rear posts * Rear approach angle approx. 860 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Possible installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing point in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as tow bar, headboard, rear wall, tailgate, and ramps * Side wall color RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately ex works Egestorf

Stanje: zelo dobro (rabljeno), prva registracija: 06/2018, barva: drugo, Leto izdelave: 2018, Konfiguracija Letnik izdelave: 2018 = Dodatne informacije = Lastna teža: 6.630 kg Nosilnost: 23.370 kg Dovoljena skupna masa: 30.000 kg Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Registrska številka: QAKP268 = Informacije o podjetju = Če imate kakršna koli vprašanja ali predloge, nas brez obveznosti kontaktirajte. Zagotavljamo odgovor v 8 urah. Cene so brez DDV. Iz navedenih informacij se ne morejo izpeljati nobene pravice. Telefonska številka pisarne: MOB: (Na voljo na WhatsAppu in Viberju: nizozemščina – angleščina – nemščina – francoščina – španščina – italijanščina) MOB: (Na voljo na WhatsAppu in Viberju: nizozemščina) Pri plačilu z bančnim nakazilom je treba denar nakazati na spodnji bančni račun. Vedno preverite podatke o plačilu, ki so navedeni na naši spletni strani. Če ste prejeli drugačne informacije, nas kontaktirajte. Nodpfx Aez Ezmkjb Dewl Če imate kakršne koli dvome, nas pokličite, da lahko preverimo račun in/ali plačilo. Bančni podatki: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/DDV/DAVK: NL857401B(01) BIC/SWIFT: RABONL2U

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle hydraulically steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED flashing beacon, rear left ----General attachments: * Side underrun protection * Landing gears in the front and mechanical swing supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted on the chassis, right-hand side ----Low-loader platform: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, width = 2,480 mm x height = 500 mm x length = 665 mm, with folding lid * 400 mm high aluminum sideboards (RAL 9010 pure white) on both sides of the fifth wheel platform, foldable and removable * Rear wall – 150 mm high, slotted in * Rear slope on the fifth wheel platform down to the low-bed area, approx. 700 mm long * Fifth wheel platform fitted with 50 mm wooden planks, low-bed area with 60 mm wooden planks * Tread plate above the axles ----Width extensions: * 8 x mechanical folding width extensions to a total width of 3 m, except in the rear slope area (extension planks available with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load securing (lashing package): * On the fifth wheel platform, 2 x 6.3 t lashing eyes each as well as 3 x 5 t lashing bars on each side in the outer frame * In the low-bed area, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, swiveling and retractable, integrated into the outer frame * 2 x 6.4 t lashing eyes on each side and 1 lashing eye at the rear in the excavator trough * 2 x container locks directly after the kick-up section in the low-bed platform ----Excavator trough: * Excavator trough from end of last rigid axle over steering axle up to the end brace, continuous, with internal reinforcement profile, approx. L = 2,450 mm x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer board of the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacities in the truck from over 40 l to 120 l/min) ----Loading dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) Nwodpfx Ajl Tnvgjb Dsl ----Coupling height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered v

Stanje: rabljeno, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235-75R17.5, Leto izdelave: 2017, 3-osni prikolica z nizko nosilno platformo. Dovoljena skupna masa 30.000 kg, uporabna nosilnost 23.570 kg. Nosilna površina približno 6.900 x 2.550 mm, paket opozoril za presežene dimenzije, okrogla opozorilna luč, odstranljiva aluminijasta sprednja stena 600 mm, 34 pritrdilnih točk, 2 zapornici za kontejnerje (Twistlock), 4 stranske letve (Exte). Aluminijaste rampe v zaklenjenem predelu za rampe. Orodjarna. BPW osi, zračna vzmet, 2. os je dvigljiva, EBS, pnevmatike 235-75R17.5, rezervno kolo s pritrdilno napravo. Višina nakladanja približno 910 mm. Priključna kljuka 40 mm, 2-vodni zračni sistem (Duomatik), 24 voltov. Vozilo je pocinkano, zunanji okvir je dodatno pobarvan v rumeno. Aluminijaste rampe Dvigljiva os = Dodatne informacije = Dimenzija pnevmatik: 235-75R17.5 Nwjdpoz Aankefx Ab Del Vzmetenje: zračno vzmetenje Lastna masa: 6.430 kg Nosilnost: 23.570 kg Dovoljena skupna masa: 30.000 kg Država proizvodnje: DE Za dodatne informacije se obrnite na Jana-Marca Schwickerta.

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Brake System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lift and lower facility ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required) * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Provision for retrofitting 20" container locks at front and rear * Bolted bulkhead made of smooth sheet steel * Fold-down side walls, trapezoidal profile, with drop-side spring assists * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Each of the front and rear corners fitted with 1 x 6.3 t lashing ring * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis Nodpfxspk D Dqs Ab Dewl ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Vehicle fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to error and prior sale ----Delivery Time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle equalization ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via draw spring and turnbuckle ----Lighting / Electrics: * RDÜ tire pressure monitoring * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable rotating beacon * 15-pin power connector ----General Attachments: * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: closed plastic mudguards; Rear: straight galvanized steel skirts, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Four stake pockets per side (stakes not included), also suitable for lashing ----Load Securing (La-Si package consists of): * 2 lashing eyes (6.4 t) front left & right on main frame of the bogie platform * 6 pairs of UVV-certified lashing rings, foldable and lowerable, loadable in all directions, recessed into the outer frame Nwedol Th I Aopfx Ab Dsl * Corner load capacity 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for max. overall width of 3 meters (except at the sloped rear) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * 4-way valve block for retrofit hydraulic lateral ramp shift ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (including 860 mm drive-on slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Info: * Permissible gross weight technically up to 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: Immediately available from Egestorf

Stanje: rabljeno, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2006, naslednji pregled (TÜV): 04/2026, Leto izdelave: 2006, Oprema: ABS, Vse XXL deluje Nedpfx Asy Ag Nwjb Dewl

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-ER 19.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering device Nwjdpfx Asmi Tmajb Djl ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye, height-adjustable by 110 mm via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED tail lights 12/24 Volt ----General Attachments: * Jost landing leg at the front * External folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Reinforcement package on chassis for drilling rig transport * 50 mm softwood floor, clamped type * Preparation in front of front wall for retrofitting container locks * Bolted smooth plate front wall * Split steel side walls – trapezoidal profile – foldable with central folding stanchion * Steel rear wall slide-in between ramps – bracket for storage in front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm * Option for installation of 3 t drop lashing rings every 600 mm * Lashing package: 1 x 10 t UVV lashing ring in each front and rear corner, 2 x 8 t UVV retractable lashing rings each side in the outer frame, various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece slide-in ramps 12 t/pair, ramps approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, rear flap, folding supports and access ramps hot-dip galvanized * ---Axles, air tanks, flange towing eye and landing leg painted in a shade of black--- * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf