Müller-Mitteltal 21 To Luftgef. Tandemtieflader Mit 3 Mtr Rampen nakup rabljenega (53.098)

Stanje: novo, največja dovoljena obremenitev: 8.600 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 11,9 Masterline: ----Zavore: * Wabco EBS * Sistem za sprostitev v sili za vzmetni akumulatorski cilinder * Bobnaste zavore ----Osi: * 2 x 5,5 t BPW osi ----Vzmetenje: * Parabolična vzmet s tandem sistemom za izravnavo ----Vlečna prikolica / prikolica s prirobničnim nosilcem: * Vlečna prikolica z možnostjo nastavitve višine za 300 mm, pocinkana, s prirobničnim nosilcem 40 mm ----Elektrika / osvetlitev: * Sistem za nadzor tlaka v pnevmatikah RDÜ * LED osvetlitev * 15-polni električni vtič ----Splošni dodatni deli: * Orodjarna iz pocinkane jeklene pločevine na desni strani * Vijakarno pritrjena zaščita pred trkom Ledev Dz N Aopfx Ag Eshk * Plastični blatnik * Jost mehanska podpora spredaj * 2 mehanski pocinkani zložljivi podstojka zadaj ----Nakladalna prikolica: * Očesne kljuke na straneh in zadaj v nosilcih osrednje ključavnice ter 3 na zunanji strani čelne stene * Pocinkano podvozje * Jeklena paleta, 3-stranska nakladalna prikolica * Neprekinjene stranske stene brez osrednje podpore, z možnostjo zlaganja s pomočjo vzmetne podpore za stransko ograjo * Zložljiva zadnja vrata in nihajna vrata s pomočjo ročne osrednje ključavnice * Vijakarno pritrjena pocinkana zadnja podpora * 4 mm jeklena pločevina na dnu * Nosilna tirnica zadaj za nakladalne rampe ----Varovanje tovorja: * Na vsakem vogalu 1 x 5 t, vgrajena in zložljiva privezna točka * Na vsaki strani 4 x 3 t, vgrajene in zložljive privezne točke v zunanjem okvirju ----Rampe: * 1 par aluminijastih nakladalnih ramp, približno 3.310 x 400 mm (nosilnost 8 t / par), primerne za vozila z gumijastimi in verižnimi gosenicami * Zaklenljiv prostor za shranjevanje zadaj pod nakladalno površino, vgrajen v podvozje ----Pnevmatike: * Pnevmatike 235/75 R 17,5 ----Barvanje: * Osi, vzmeti, zračni rezervoar, vlečna prikolica in podpore pobarvane v črni barvi * Stranska ograja pobarvana v RAL 9010, čisto bela * Barvanje stranskih sten v poljubni barvi RAL je mogoče proti doplačilu * Dno in čelna stena pocinkana ----Informacije: * Nadgradnja ojačana s certifikatom za varovanje tovorja v skladu z EN 12642 XL * Novo vozilo z garancijo proizvajalca * Pridržane spremembe in napake * Prodaja je rezervirana ----Dobavni rok: * Na voljo približno v 45. tednu 2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * bobnaste zavore * elektronski zavorni sistem (EBS) * naprava za izpust zraka v primeru izredne zavore za vzmetne akumulatorje ----Osi: * 2 x 7 ton, osi Gigant ----Vzmetenje: * parabolične vzmeti z izravnalnim agregatom ----Vlečna palica / prirobnična vlečna palica: * vlečna palica, višina nastavljiva za 300 mm * podaljšek vlečne palice za 250 mm (na 2.250 mm) * 40-milimetrska prirobnična vlečna palica ----Osvetlitev / električna napeljava: * RDÜ (nadzor tlaka v pnevmatikah) * LED-osvetlitev ----Splošni dodatni deli: * sprednji opornik Jost * zunanji, vročepocinkani zložljivi oporniki zadaj * plastična orodjarna škatla spredaj na desni strani na čelni steni * stranski zaščitni element * plastični zaščitni element za četrt kolesa ----Nosilna površina: * 50 mm debela deska iz iglavca Ljdpfxjxglh Re Ag Eohk * pred čelno steno naprava za naknadno namestitev zaklepnih mehanizmov za kontejnerje * vijična čelna stena iz gladke pločevine * stranske stene iz jeklene pločevine - trapezno profilirane - z možnostjo zlaganja s pomočjo vzmetnega dvigala za stransko steno * zadnja jeklena stena, ki se lahko vrine med rampe - pritrdilni element, ki se uporablja, ko se ne uporablja, notri pred čelno steno * zadnji nosilci, vijični ----Pripomočki za pritrditev tovora: * perforiran zunanji okvir, nagnjen pod kotom približno 45 stopinj, z nosilnostjo 2 toni na vsakih 480 mm * možna je vgradnja 3-tonske pritrdilne zanke na vsakih 600 mm * v kotih spredaj in zadaj po 1 pritrdilna točka z nosilnostjo 6,3 tone * na čelni in zaključni palici različne vrtine za možnost pritrditve z 1,2 tone ----Rampe: * enodelne mehanske rešetaste rampe z vzmetjo za delovanje z eno osebo, približno 2.750 x 600 mm (možnost zlaganja do 20 mm) * naklon na zadnji strani približno 860 mm ----Barvanje: * vročepocinkano podvozje, vlečna palica, čelna stena, rampe in zadnja stena * barva stranske stene RAL 9010, čista bela * barvanje stranskih sten v barvnem odtenku RAL je možno za doplačilo ----Informacije: * --ojačana in certificirana nadstavba v skladu s standardom EN 12642 XL, vključno s certifikatom za pritrditev tovora-- * novo vozilo z garancijo proizvajalca * napake in medvmesna prodaja pod pridržkom ----Dobavni rok: * na voljo približno od 41. tedna leta 2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * bobnaste zavore * elektronski zavorni sistem (EBS) * naprava za izredno sprostitev zavor za cilindrične zavorne akumulatorje ----Osi: * 2 x 7 t Gigant osi ----Vzmetenje: * parabolične vzmeti z izravnalnim agregatom ----Potezna prikolica / prikolica s prikolico: * višina potezne prikolice nastavljiva za 300 mm * podaljšek potezne prikolice za 250 mm na 2.250 mm * 40 mm prikolica s prikolico ----Osvetlitev / Elektrika: * sistem za nadzor tlaka v pnevmatikah (RDÜ) * LED osvetlitev ----Splošni dodatni deli: * sprednji podpiralni mehanizem Jost * zunanji pocinkani, zložljivi podpiralni nogari na zadnji strani * plastična orodjarna škatla na sprednji desni strani na čelni steni * stranski zaščitni element * plastični stranski odbijač ----Ploščad prikolice: Lhedpfx Aoq Dyvvjg Eok * 50 mm deska iz iglastih vrst lesa * pred čelno steno naprava za naknadno montažo zaklepnih mehanizmov za kontejnerje * čelna stena, privita iz gladke pločevine * stranske stene iz jeklene pločevine - trapezno profilirane - z možnostjo zlaganja s pomočjo vzmetnih dvigal za stransko steno * jeklena zadnja stena, ki se lahko potisne med rampe - nosilec, ko se ne uporablja, na notranji strani pred čelno steno * zadnji okvir, privit ----Varovanje tovora: * luknjan zunanji okvir, nagnjen za približno 45 stopinj, z 2 t vlečne sile na vsakih 480 mm * možna vgradnja 3 t pritrdilnih točk na vsakih 600 mm * na vogalih spredaj in zadaj po 1 x 6,3 t pritrdilna točka * v čelni in končni nosilni konstrukciji različne luknje za 1,2 t možnost pritrditve * pritrdilna letva Profifix na vzdolžni osi, na sredini, za možnost pritrditve do LC 3000 daN ----Rampe: * enodelne mehanične rešetaste rampe z vzmetjo za delovanje z eno osebo, približno 2.750 x 600 mm (lahko se potisnejo skupaj do 20 mm) * sprednji naklon na zadnji strani, približno 860 mm ----Barvanje: * pocinkana šasija, potezna prikolica, čelna stena, rampe in zadnja stena * barva stranske stene v RAL 9010, čisto bela * barvanje stranskih sten v RAL barvnem odtenku je možno proti doplačilu ----Informacije: * --Okrepljena in certificirana konstrukcija po EN 12642 XL, vključno s certifikatom za varovanje tovora-- * novo vozilo s proizvajalčevo garancijo * napake in vmesna prodaja pridržane ----Dobavni rok: * takojšen dobavni rok iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * bobnaste zavore * elektronski zavorni sistem (EBS) * naprava za izredno sprostitev zavor za vzmetne akumulatorje ----Osi: * 2 x 7 ton, osi Gigant ----Vzmetenje: * parabolično vzmetenje z izravnalnim agregatom ----Potezna priprava / priključna priprava: * potezna priprava, nastavljiva po višini za 300 mm * podaljšek potezne priprave za 250 mm (na 2.250 mm) * 40 mm priključna priprava ----Osvetlitev / električna napeljava: * RDÜ (nadzor tlaka v pnevmatikah) * LED osvetlitev ----Splošni dodatni deli: * sprednji podpiralni stojalo Jost * zunanja, vroče pocinkana, zložljiva podpiralna stojala na zadnji strani * plastična orodjarna škatla na sprednji desni strani, na čelni steni * stranska zaščita * plastični četrtni blatoohranilnik ----Ploščad nizkopodsestnega priklopnika: * 50 mm iglasta lesena plošča * pred čelno steno naprava za naknadno namestitev kontainerjev * vijolična čelna stena iz gladke pločevine * stranske stene iz jeklene pločevine – trapezno profilirane – zložljive s pomočjo vzmetnih dvigal * jeklena zadnja stena, ki jo je mogoče vrinati med rampe – držalo pri neuporabi znotraj, pred čelno steno * zadnja ograja, vijolična ----Varovanje tovor: * luknjast zunanji okvir, upognjen pod kotom približno 45 stopinj, z 2 t vlečne sile na vsakih 480 mm * možna je vgradnja 3 t pritrdilnih elementov za pritrditev tovora na vsakih 600 mm * v vogalih na sprednji in zadnji strani po 1 pritrdilni element s 6,3 t vlečne sile * v čelni in zaključni prečki različne luknje za pritrditev tovora z 1,2 t vlečne sile * Profifix pritrdilna letva v vzdolžni osi, na sredini, za pritrditev tovora do LC 3000 daN ----Rampe: * enodelne mehanične rešetaste rampe z vzmetnim mehanizmom za delovanje z eno osebo, približno 2.750 x 600 mm (mogoče jih je pomikati skupaj na 20 mm) * nagib za vožnjo na zadnji strani, približno 860 mm ----Barvanje: * vroče pocinkano podvozje, potezna priprava, čelna stena, rampe in zadnja stena * barva stranic v RAL 9010, čista bela * barvanje stranskih sten v enem RAL odtenku je možno po dogovoru ----Informacije: * --ojačan in certificiran nadgradnji po EN 12642 XL, vključno s certifikatom za varovanje tovor-- * novo vozilo z garancijo proizvajalca Lhedpforvvflex Ag Esk * napake in vmesna prodaja pridržane ----Dobavni rok: * takoj na voljo iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes switched to the first axle via EBS (no installation required on the truck side) * Rear axle as self-steering axle with electro-pneumatic steering lock * Locking of the self-steering axle from the driver's cab for maneuvering purposes, controlled via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting/lowering device and Ride-to-Return valve ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at rear for extended length lighting * Side marker lights with indicator signal control * Tyre pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) ----General equipment: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connecting cables from truck to semi-trailer ----Low loader deck: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and front tool box made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminium side boards (in RAL colour of choice) on the sides of the fifth wheel platform, foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on fifth wheel platform to low bed approx. 700 mm long with tread plate covering and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and low bed platform with 60 mm clamped wooden planks Lhjdpfx Agsq Euaks Eek * Tear plate above the axles * 9 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension planks available with closed storage compartment across the direction of travel under the loading floor) * 3 mounting shafts under the fifth wheel platform for storage of optional aluminium loading ramps or wooden planks for wheel well coverings ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame angled at 45° with hole pattern for lashing points (2 t lashing capacity per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings each side recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the drop, 1 x above the centre axle next to the longitudinal beam) Low loader platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 x beginning of the drop on the fifth wheel platform, 1 x beginning of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings each side (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frame of the wheel wells (2 on the front wheel well, 1 on the rear wheel well) ----Excavator arm recess: * Extended excavator arm recess from end of last fixed axle through to steering axle up to rear crossmember, continuous with

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps Lodpfopk D D Uox Ag Eshk ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: Lhedpspk D Dmjfx Ag Eok * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW axles * Start assist for shunting purposes on the first axle, activated via EBS (without truck-side installation) * Last axle is a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for maneuvering purposes from the driver’s cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering function as well as RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lamps with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear Ledpfx Aoykx Nksg Eohk * Swing arm as a carrier for connecting lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Gooseneck platform with 45° chamfered front corners and front-mounted toolbox made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminum side boards (in desired RAL color) foldable and removable along the gooseneck platform * Rear wall, insertable, height 150 mm * Rear incline on the gooseneck platform to the low-bed approx. 700 mm long with checker plate covering and at the end a perforated strip for attaching aluminum approach ramps * Gooseneck platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Tread plate over axles * 9 mechanical extension panels to a total width of 3 m, not included in the rear incline (extension planks available with closed transverse stowage compartment under load floor) * Preparation for 3 storage recesses under the gooseneck platform for optional storage of aluminum approach ramps or planks for covering wheel recesses * Preparation for container locks on the swan neck ----Load Securing (LaSi Package): Gooseneck platform: * Perforated outer frame, 45° angled, with hole pattern for lashing devices (2 t lashing capacity per point with a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor per side (1 x on gooseneck platform, 1 x on longitudinal frame after the cranking, 1 x above middle axle next to longitudinal frame) Low-bed platform: * 3 x 13.4 t lashing rings per side at the outer frame (1 x start of gooseneck cranking, 1 x start of approach ramp, 1 x end of approach ramp) * 2 x 10 t lashing rings per side (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side screwed to outer frames of the wheel recesses (2 at front wheel recess, 1 at rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last rigid axle over the steering axle to the end cross member, continuous with internal reinforcing profile approx. W = 770 mm x T rear

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Moving-off aid for shunting, connected to the first axle via EBS (no installation required on the truck side) * Last axle as self-steering trailing axle with electro-pneumatic lock * Trailing axle lock for shunting purposes, activated from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting Lhsdpfjykx Nqox Ag Eek * Side marker lights with indicator circuit * Tire pressure monitoring with display in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Landing gear at front, swing supports at rear of the chassis * Straight steel fenders * Spare wheel carrier in front of front wall crossmember (spare wheel not included) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connection lines from truck to trailer ----Low Loader Deck: * 2nd kingpin position * Saddled platform with 45° chamfered front corners and front toolbox made from galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high drop-down/removable aluminium sideboards (custom RAL color) on saddle platform * Removable 150 mm high rear wall * Rear inclined ramp of approx. 700 mm at the end of saddle platform to low-bed deck, fitted with checker plate and lashing bar for attaching aluminium approach ramps * Saddle platform with 50 mm tongued-and-grooved timber floor, low-bed platform with 60 mm tongued-and-grooved timber planks * Tread plate above axles * 9 x mechanical folding extensions to 3 m overall width, but not on rear ramp (extension planks included with lockable transverse storage compartment under load area) * Preparation for 3 ramp storage compartments under saddle platform for either aluminium ramps or timber planks for wheel trough covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated external frame, angled at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point, minimum spacing 480 mm) * 3 x 13.4 t recessed tie-down rings per side (1 on saddle platform, 1 on main longitudinal beams after the step, 1 above the center axle beside the beam) Low-bed Deck: * 3 x 13.4 t tie-down rings per side on outer frame (1 at the start of the gooseneck, 1 at the start of the rear ramp, 1 at the end of the ramp) * 2 x 10 t tie-down rings per side (1 between front wheel-well and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t tie-down rings per side, bolted to the outer frame of wheel wells (2 at front, 1 at rear wheel well) ----Digger Arm Rest: * Extended digger arm rest from end of last fixed axle over steering axle to end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D at rear

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as trailing steering axle with electro-pneumatic steering lock Lsdpjtpta Defx Ag Ejhk * Locking of the trailing axle from the driver's cab for shunting via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 extra LED reversing lights * 7-pin socket at the rear for additional length lighting * Side marker lights with indicator activation * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the headboard crossmember (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection cables from truck to semi-trailer ----Lowbed platform: * Second kingpin position * Fifth wheel platform with 45° bevelled front corners and front toolbox made of galvanised, powder-coated steel sheet, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * Side aluminium drop sides, 400 mm high (in RAL custom colour), foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on the saddle platform to the lowbed approx. 700 mm long with chequer plate covering and a perforated strip at the end for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tread plate over the axles * 9 x mechanical folding wideners to 3 m overall width, not in rear slope (widening planks available with sealed crosswise storage compartment under the loading area) * 3 mounting shafts under the saddle platform for the storage of either aluminium loading ramps or wooden planks for wheel well covering ----Load securing (LaSi-package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashings (2 t lashing capacity per tie-down point at a minimum spacing of 480 mm) * 3 x 13.4 t recessed lashing rings per side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal members after the cranking, 1 x above the central axle next to the longitudinal member) Lowbed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 x at the start of the cranked platform, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 t lashing rings per side (1 x between the front wheel well and 1st axle, 1 x between the 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear wheel well) ----Excavator arm rest: * Extended excavator arm rest from end of last rigid axle over steering axle to end crossmember, continuous with internal reinforcing profile approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * 2 x 6.4 t lashing rings per side in the exca

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * EBS (elektronski zavorni sistem) * Naprava za sprostitev v sili za cilindrične vzmetne akumulatorje * Bobnaste zavore * 2 x 7 ton, osi Gigant * Zračno vzmetenje s sistemom za dvigovanje in spuščanje * Povezovalna palica, nastavljiva po višini za 300 mm * Podaljšek povezovalne palice za 250 mm na 2.250 mm * Nadzor tlaka v pnevmatikah s prikazom v kabini tovornjaka prek signala EBS – brez dodatne vgradnje v tovornjak * 15-polni vtič za napajanje * LED osvelitev * Prednja oporna noga * Zunanja, zložljiva oporna noga zadaj * Plastična orodjarna škatla, približno 858 x 500 x 500 mm, na desni strani spredaj na čelni steni * Stranska zaščita pred trkom * Plastični blatnik * 50 mm debela deska iz iglastih vrst lesa * Pred čelno steno in zadaj pritrdilna točka za poznejšo namestitev 20-palčnih zapahov * Vijakom pritrjena čelna stena iz gladke pločevine * Stranske stene iz jeklene pločevine – trapezno profilirane – zložljive, na sredini enkrat razdeljene * Jeklena zadnja stena, ki se lahko vrine med rami, v primeru, da ni v uporabi, se shrani v notranjosti pred čelno steno * Zadnji nosilci, vijakom pritrjeni * Zunanji okvir z luknjami, približno 45 stopinj, s 2 tonami nosilne sile na vsakih 480 mm * Možnost vgradnje 3-tonskih pritrdilnih obročev na vsakih 600 mm – na vsaki strani nameščenih 4 pritrdilni obroči * V kotih spredaj in zadaj, na vsaki strani po 1 x 6,3 tone nosilne sile * Profifix pritrdilna letva na vzdolžni osi, na sredini, za pritrditev do LC 3000 daN * Na čelni in zaključni nosilci različne luknje za pritrditev do 1,2 tone * Enodelna mehanska rešetasta ploščad za dostop z vzmetnim mehanizmom za delovanje z eno osebo, približno 2.750 x 600 mm (lahko se skupaj potisne do 20 mm) * Naklon za dostop zadaj, približno 860 mm * Podvozje, povezovalna palica, čelna stena, zadnja vrata, zložljive oporne noge in ploščadi za dostop, vroče pocinkane Lhedpfx Agjl Th Dfo Esk * Os, vzmeti, zračni rezervoar, priključna cev in oporne noge, prebarvani v črno * Stranske stene v barvi RAL 9010, čisto bela * – ojačan in certificiran nadgradnji po EN 12642 XL vključno s potrdilom o varnosti tovora – * Novo vozilo z garancijo proizvajalca * Napake in vmesna prodaja pridržani * Na voljo takoj iz Egestrofa

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * EBS (elektronski zavorni sistem) * Naprava za sprostitev v primeru izredne potrebe za vzmetne cilindrove zavore * Bobnovi zavori * 2 x 7 ton, osi Gigant * Zračno vzmetenje s sistemom za dvigovanje in spuščanje * Vlečna palica, višina nastavljiva za 300 mm Lhsdpjl Thvxofx Ag Eek * Podaljšek vlečne palice za 250 mm na 2.250 mm * Nadzor tlaka v pnevmatikah z možnostjo prikaza v kabini tovornjaka prek signala EBS - brez vgradnje na strani tovornjaka * 15-polni vtič za elektriko * LED-osvetlitev * Podpiralna opora spredaj * Zunanja, zložljiva podpiralna opora zadaj * Plastična orodjarna škatla, približno 858 x 500 x 500 mm, spredaj na desni strani, na čelni steni * Stranski zaščitni sistem * Plastični četrtni odbijač * 50 mm lesen talni oblog * Pred čelno steno in zadaj, naprava za naknadno montažo 20-palčnih zaklepnih mehanizmov * Vijatična čelna stena iz gladke pločevine * Stranske stene iz jeklene pločevine – trapezno profilirane – zložljive, na sredini 1x razdeljene * Jeklena zadnja stena, ki jo je mogoče vstaviti med rampe, držalo za uporabo pa je v notranjosti pred čelno steno, kadar ni v uporabi * Zadnji nosilci, vijatični * Zunanji okvir z luknjami, približno 45 stopinj, ukrivljen, z vlečno silo 2 tone na 480 mm * Vgradnja 3-tonskih pritrdilnih čepov je možna na vsakih 600 mm – na vsaki strani je nameščenih 4 pritrdilni obroči * V vogalih spredaj in zadaj je na vsaki strani po 1 pritrdilni obroč s kapaciteto 6,3 tone * Profifix pritrdilna letev v vzdolžni osi, na sredini, za pritrditev do 3000 daN * V čelni in končni nosilni konstrukciji so različne luknje za pritrditev z zmogljivostjo 1,2 tone * Enodelna mehanska rešetasta rampa z vzmetjo za enoosebno uporabo, približno 2.750 x 600 mm (lahko se podaljša do 20 mm) * Zadnja nagibna plošča, približno 860 mm * Podvozje, vlečna palica, čelna stena, zadnja vrata, zložljive podpore in rampe so vroče pocinkane * Osje, vzmeti, zračni rezervoar, priključni spoji in podpiralne opore so pobarvane v črni barvi * Stranske stene v barvi RAL 9010, čisto bela * --ojačana in certificirana nadgradnja po standardu EN 12642 XL, vključno s certifikatom za pritrditev tovora-- * Novo vozilo z garancijo proizvajalca * Napake in vmesna prodaja pridržane * Na voljo takoj, dobava iz Egestrofa.

Stanje: rabljeno, največja dovoljena obremenitev: 31.820 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1980, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 3.000 mm, skupna širina: 2.550 mm, skupna višina: 900 mm, Leto izdelave: 1980, Oprema: ABS, dvižna zadnja plošča, Prikolice Müller-Mitteltal T4, prikolica z nizko nosilno površino * Osne osi SAF s kolutnimi zavorami * Dvojne pnevmatike * Nizka nosilna površina z razširitvijo * Hidravlične nakladalne rampe, pomične (2 kosa) * Prekošen vmesni del, po katerem se lahko vozi * Dodatne opore zadaj * Izvedba z vrtljivo ploščo ----Dimenzije in nosilna površina: dolžina nosilne površine približno 9.800 mm * Širina nosilne površine: 2.550 – 3.000 mm * Višina nosilne površine: 900 mm ----* Dovoljena skupna masa: 40.000 kg * Nosilnost: 31.820 kg * Pnevmatike: 235/75R17.5 ----Števila vozil: 11892----Pridržujemo si pravico do sprememb in napak.----Oglaševanje in različne napisne oznake so bile digitalno odstranjene. -----Z veseljem vam bomo pomagali pri vseh formalnostih, ki nastanejo pri nakupu vozila. Enostavno nam sporočite vaše želje in predloge, mi pa bomo poskrbeli za ostalo. Poleg tega vam lahko za doplačilo ponudimo naslednje storitve:----Prevzem vašega starega vozila * Tehnični pregled/odobritev * Celotna ureditev izvoza * Posredovanje pri financiranju * Prijava za izvozne oznake * Prevoz vozil Lhodsy Skl Iopfx Ag Esk * Registracija vozil * Reševanje in transport vozil ----?VAŠA VTS EKIPA

Stanje: rabljeno, lastna masa: 8.800 kg, največja dovoljena obremenitev: 31.200 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/1996, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.510 mm, višina nakladalnega prostora: 1 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, 4 osi, vrtljiva gred, listnato vzmetenje, razširljiv do 3 m, pritrdilna ušesa, dvo-delne nakladalne rampe, hidravlične rampe, zadnja podpora, stranska aluminijasta zaščita, dvojne pnevmatike, škatla za orodje. Nadgradnja: 4-osna nizkopodna prikolica s hidravličnimi dvodelnimi rampami. Višina nakladanja cca 900 mm. 4x SAF osi 10t, bobnaste zavore, vlečno uho 40 in 50 mm! Dolžina zgornje ploščadi cca 2900 mm! Dolžina spodnje ploščadi cca 7100 mm! PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane! Lhedpfxoywvhrj Ag Esk

Stanje: rabljeno, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2004, naslednji pregled (TÜV): 08/2026, * Müller Mitteltal TS3 nizkopodni polpriklopnik * Prva registracija: 11/2004 * 3 osi * Zračno vzmetenje * Gigant osi * Hidravlične dolge rampe, pomične in zložljive * Razširitve iz 2,50 m na 3,0 m širina nakladalnega prostora Ledpfx Aew Tgkbeg Ejhk * Nakladalna dolžina: 8,50 m pri nakladalni višini 0,85 m * Nakladalna dolžina na vratu: 3,40 m pri nakladalni višini 1,50 m * Podpore * Neto teža: 10.260 kg * Tehnično dovoljena skupna masa: 47.000 kg * TÜV veljaven do: 08/2026 * Tehnični pregled do: 02/2026

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assemblies ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, approx. 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost mechanical landing gear, front * External, hot-dip galvanized folding supports, rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted on front wall outside ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector Lhsdpfx Ajl Thy Rjg Eek * LED tail lights ----Loading Platform: * 50 mm softwood floor * 20'' container locks mounted at front and rear * Bolted smooth steel front wall * Drop sides, steel, trapezoidal profile, drop-down with drop-side lifting springs * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted each side) * 1 x 6.3 t lashing ring fitted in each corner front and rear * Various holes in front and rear transverse beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment integrated in the chassis below the loading area ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Drop side color in RAL 9010 pure white * Side panels can be painted in a RAL color at extra cost ----Info: * New vehicle without registration * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle units ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at front * Bolt-on, hot-dip galvanized folding supports at rear (external) * Side underrun protection * Plastic quarter mudguards * Plastic toolbox on front right, externally mounted on front wall ----Electrics / Lighting: * Tyre pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Load Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted bulkhead made of smooth steel sheet * Drop sides made of trapezoidal-profile steel sheet, foldable with sideboard spring lifter * Hot-dip galvanized bolted rear stanchions ----Load Securing: * Perforated outer rail, edged at approx. 45°, with lashing capacity of 2 t every 480 mm * Optional 3 t folding lashing brackets every 600 mm (five lashing rings mounted per side) * One 6.3 t lashing ring in each corner, front and rear * Various bores in front and rear crossmembers for 1.2 t lashing points ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment recessed into the chassis frame under the loading area ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Sideboard colour in RAL 9010 pure white * Painting of side walls in a RAL colour of choice available at extra charge ----Information: * New vehicle, not registered * Subject to errors and prior sale ----Delivery Time: Lhodpfsl Tilxox Ag Eek * Available immediately from Egestorf

Stanje: rabljeno, lastna masa: 5.750 kg, največja dovoljena obremenitev: 24.250 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1993, vzmetenje: jeklo, velikost pnevmatike: 235/75R17,5 141/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 141/140J, velikost zadnje pnevmatike: 235/75R17,5 141/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak,  ,  Vozilo stranke, , --  Napake v tisku, napake in spremembe so pridržane, vzorčne fotografije --, Več podatkov na: !, Več podrobnosti: ! Lhodpfx Aszr Sgkeg Eok

Stanje: novo, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 11,9 Masterline ----Zavore: * Wabco EBS * Sistem za odklepanje v sili za vzmetni cilindrični aktuator Lhjdpfsq Euagsx Ag Ejk * Bobnaste zavore ----Os: * 2 x 5,5 t BPW osi ----Vzmetenje: * Parabolična vzmet z tandem sistemom za uravnavanje ----Vlečna prikolica / priključna prikolica: * Vlečna prikolica, nastavljiva po višini za 300 mm, s priključno prikolico 40 mm ----Elektrika / osvetlitev: * Sistem za nadzor tlaka v pnevmatikah RDÜ * Multivoltaža * 15-polni električni vtič * 12 V, 13-polni dodatni kabel * Podaljšani priključni kabli za gozdarska in kmetijska vlečna vozila * LED zadnje luči ----Splošni dodatni deli: * mehanski podporni opornik spredaj * 2 mehanska zložljiva opornika zadaj * Plastična orodjarna škatla na desni strani * 2-stopenjska stopnica na levi strani spredaj v smeri vožnje * Podvozni ščit, pritrjen z vijaki * Plastični blatniki ----Nakladalna platforma: * Obešanke za mreže na strani in zadaj v ležajih centralne ključavnice, ter 2 na čelni steni * Jeklena platforma - 3-stransko nakladalno telo (neprekinjene stranske stene - brez sredinskih nosilcev - zložljivo z vzmetnim dvigalom, zložljiva zadnja vrata in nihajna prek centralne ključavnice * 4 mm jeklena pločevina na dnu * Vodilna tirnica zadaj za nagibne rampe ----Varovanje tovora: * Na vsakem vogalu po 1 x 5 t pritrdilno vrv * Poleg tega na vsaki strani po 4 x 3 t pritrdilne zanke, vgrajene v zunanji okvir ----Rampe: * 1 par aluminijastih nagibnih ramp, približno 3.310 x 400 mm (nosilnost 8 t / par), primerne za vozila z gumijastimi ali goseničnimi pogoni * Zaklepni prostor za shranjevanje zadaj, pod nakladalno površino, vgrajen v šasijo ----Pnevmatike: * Pnevmatike 385/55 R 19,5 ----Barvanje: * Šasija, vlečna prikolica, nakladalna platforma, čelna stena, zložljivi oporniki in zadnji nosilci, prevlečeni z vročim cinkanjem * Os, vzmet, rezervoar za zrak, priključna prikolica in podporni opornik, prebarvani v črno barvo * Barvanje stranskih sten v RAL - 9010 čisto bela ----Informacije: * Nadgradnja je ojačana s certifikatom za varovanje tovora v skladu s standardom EN 12642 XL * Novo vozilo z garancijo proizvajalca * Pridržane napake in vmesna prodaja ----Dobavni rok: * Na voljo takoj, Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 11,9 Masterline Ljdpfx Ajl Thw Ijg Ejhk ----Zavore: * Wabco EBS * Sistem za sproščanje zavor v sili za vzmetne akumulatorske cilindre * Bobnaste zavore ----Osi: * 2 x 5,5 tone BPW osi ----Vzmetenje: * Parabolne vzmeti s tandem sistemom za izravnavo ----Vlečna palica / prirobnična vlečna palica: * Vlečna palica, nastavljiva po višini za 300 mm, s prirobnično vlečno palico 40 mm ----Elektrika / osvetlitev: * Sistem za nadzor tlaka v pnevmatikah (RDÜ) * Multivoltaža * 15-polni vtič za elektriko * 12 V, 13-polni dodatni kabel * Podaljšani priključni kabli za gozdarska in kmetijska vlečna vozila * LED zadnje luči ----Splošni dodatni deli: * mehansko oporno kolo spredaj * zadaj 2 mehanski zložljivi oporni nogi * plastična orodjarna škatla na desni strani * 2-stopenjska stopnica na levi strani spredaj, v smeri vožnje * Zaščita pred podvozjem, pritrjena z vijaki * Plastični delni blatnik ----Kipna prikolica: * Mrežni kavlji na strani in zadaj, v ležajih osrednjega zaklepanja, ter 2 na čelni steni * Jeklena paletna 3-stranska kipna nadstavba (neprekinjene stranske stene – brez srednjih okvirjev – zložljiva s pomočjo vzmetnih dvižnikov na stranskih stenah, zadnja vrata zložljiva in nihajna prek ročnega osrednjega zaklepanja * 4 mm jeklena pločevinasta podlaga * Pritrdilna tirnica zadaj za priklopne rampe ----Pripomočki za pritrditev tovora: * v vsakem vogalu po 1 x 5 ton pritrdišče * in na vsaki strani po 4 x 3 tone pritrdišče, vgrajeno v zunanji okvir ----Rampe: * 1 par aluminijastih priklopnih ramp, približno 3.310 x 400 mm (nosilnost 8 ton / par), primerno za vozila s pnevmatikami in gosenicami * zaklepni prostor za shranjevanje zadaj, pod tovorno površino, vgrajen v podvozje ----Pnevmatike: * Pnevmatike 385/55 R 19,5 ----Barvanje: * Podvozje, vlečna palica, kipna nadstavba, čelna stena, zložljive oporne noge in zadnji okvirji, prevlečeni z vročim cinkom * Osje, vzmeti, zračni rezervoar, prirobnična vlečna palica in oporno kolo, pobarvani v črni barvi * Barvanje stranskih sten v RAL - 9010, čista bela ----Informacije: * Nadstavba je ojačana s certifikatom za pritrditev tovora po standardu EN 12642 XL * Novo vozilo z garancijo proizvajalca * Napake in vmesna prodaja pridržani ----Dobavni rok: * takojšen dostop iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14,4: ----Zavore: * EBS * Naprava za sprostitev v sili za vzmetne zavorne cilindre * Bobnaste zavore ----Os: * 2 x 7 t. osi Gigant ----Vzmetenje: * Listnate vzmeti s tandem sistemom za izravnavo ----Vlečna palica / prirobnična vlečna palica: * Vlečna palica, višina nastavljiva za 300 mm, s prirobnično vlečno palico 40 mm ----Elektrika / osvetlitev: * Nadzor tlaka v pnevmatikah z možnostjo prikaza v vozilu prek signala EBS, brez vgradnje v vozilu * 15-polni vtič za elektriko * LED zadnje luči ----Splošni dodatni deli: * mehanska opora spredaj * zadaj 2 mehanski zložljivi opori * plastična orodjarna škatla, približno 750 x 350 x 300 mm, desna stran * vijakni zaščitni odbijač * plastični četrtni blatnik ----Okvir: * Glavni okvir iz finozrnatega jekla ----Nakladalna platforma: * Mrežaste kljuke na straneh in zadaj v ležajih centralnega zaklepanja, ter 2 kosa na čelni steni * Jeklena paleta - dvostranska nakladalna platforma, čelna stena fiksna, izdelana iz gladke pločevine, neprekinjene stranske stene - z možnostjo odklopa, z vzmetjo za dvig stranske stene in nihajnim sistemom prek ročnega centralnega zaklepanja * Zadnji nosilci vijakni * Jeklena zadnja stena vstavljena pred rampami Ledpotr Sucjfx Ag Eohk * V vsakem kotu po 1 x 5 t pritrdišč, ter na vsaki strani po 4 x 3 t pritrdišč, vstavljenih v zunanji okvir * 4 mm dno iz finozrnatega jekla ----Rampe: * Dvodelne mehanske rešetaste rampe z aluminijastim končnim delom 2.150 + 1.300 mm x 600 mm (ročno skupaj potiskane do 80 mm) ----Barvanje: * Podvozje, vlečna palica, zadnji nosilci, zaščitni odbijač, mehanske opore in rampe, pocinkane * Os, vzmeti, zračni rezervoar, prirobnična vlečna palica in opora, barvane v črni barvi * Stranske stene in nakladalna platforma v RAL 9010, čista bela * Barvanje stranskih sten in nakladalne platforme v drugem RAL odtenku je možno, po dogovoru ----Informacije: * Novo vozilo z garancijo proizvajalca * Pridržane napake in možnost prodaje ----Dobavni rok: * Na voljo takoj, iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14,4: ----Zavore: * EBS * Sistem za sproščanje zavor v sili za vzmetne akumulatorske cilindre * Bobnaste zavore ----Os: * 2 x 7 ton - osi Gigant ----Vzmetenje: * Parabolične vzmeti s tandem sistemom za izravnavo ----Vlečna palica / prirobnica vlečne palice: * Vlečna palica, nastavljiva po višini za 300 mm, s prirobnico vlečne palice 40 mm ----Elektrika / osvetlitev: * Nadzor tlaka v pnevmatikah z možnostjo prikaza na vozilu prek signala EBS, brez dodatne namestitve na vozilu * 15-polni vtič za elektriko * LED zadnje luči ----Splošni dodatni deli: * mehanska opora spredaj * zadaj 2 mehanski zložljivi opori * plastična orodjarna škatla, cca 750 x 350 x 300 mm, desna stran * vijakljen podvozni ščit * plastični blatnik ----Okvir: * Glavni okvir iz fino zrnate jeklene zlitine ----Nakladalna prikolica: * Obešalne kljuke na boku in zadaj v ležajih centralne zapore, ter 2 kosa na čelni steni * Jeklena paletna nadstavba, dvostransko nakladalna prikolica, čelna stena fiksna, iz gladke pločevine, neprekinjene bočne stene - brez srednjih nosilcev, z možnostjo zlaganja s pomočjo vzmetne naprave in nihanja s pomočjo ročne centralne zapore * Zadnji nosilci vijačeni * Jeklena zadnja stena, vstavljena pred rampami Lsdpfstr St Uex Ag Ejhk * Na vogalih po 1 x 5 ton, privezni obroči, na boku pa po 4 x 3 tone, vstavljeni v zunanji okvir * 4 mm dno iz fino zrnate jeklene zlitine ----Rampe: * Dvodelne mehanske rešetaste rampe z aluminijastim končnim delom, 2.150 + 1.300 mm x 600 mm (ročno združljivi do 80 mm) ----Barvanje: * Podvozje, vlečna palica, zadnji nosilci, podvozni ščit, mehanske podpiralne opore in rampe, vroče pocinkani * Os, vzmeti, zračni rezervoar, prirobnica vlečne palice in podpiralne opore, pobarvani v črni barvi * Bočne stene in nakladalna prikolica v čisti beli barvi RAL 9010 * Barvanje bočnih sten in nakladalne prikolice v barvnem odtenku RAL je možno proti doplačilu ----Informacije: * Novo vozilo z jamstvom proizvajalca * Pridržujemo si pravico do sprememb in napak * Prodaja je možna, dokler je artikel na zalogi ----Dobavni rok: * Na voljo takoj iz Egestorfa

Stanje: rabljeno, največja dovoljena obremenitev: 4.500 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 07/1979, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.900 mm, višina nakladalnega prostora: 380 mm, skupna širina: 2.500 mm, skupna višina: 3.000 mm, Leto izdelave: 1979,

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profi ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrics: * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable rear LED beacon * 2 LED reversing lights (activated via reverse gear) ----General equipment: * Manometer - pressure gauge for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign sets front and rear * VA plastic quarter mudguards with spray protection * HA straight galvanized steel skirts with spray protection * Reflective contour tape on sides and rear * Tool box, galvanized steel sheet, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low loader platform: * Forepart in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip surface on the steel plate of the turntable platform * Hardwood floor on the running surfaces of the low loader platform ----Load securing (La-Si package comprising): * In front of the front wall support, 1 x 13.4 t UVV lashing point each left & right * 4 lateral holes each in the turntable platform with 2 t lashing capacity each * 1 pair of lashing points (13.4 t) hanging at the rear left & right in front of the rear support * 4 pairs of UVV lashing rings (10 t) on each side, swiveling and lowering, loadable in all directions and recessed in the outer frame * 3 pockets for stanchions per side, with simultaneous 2 t lashing facility ----Widening package: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not in the rear taper) * Plank holder for extensions under the chassis on the left, longitudinally ----Excavator arm rest: * Excavator arm rest above HA up to the end support, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing points each side in the excavator arm rest ----Ramps: * Hydraulic one-piece approach ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of ramps made from hardwood Lhodpfx Ajl Tlhrog Eek * Steel structure prepped for 6-section control valve ----Loading height: * Loading edge unladen approx. 950 mm +/- 20 mm ----Tires: * 235/75 R 17.5 tires ----Paintwork: * Chassis, turntable, folding outriggers, mechanical supports, and approach ramps hot-dip galvanized * -- Axles, air tanks, drawbar finished in a shade of black -- ----Information: * Vehicle has a day registration in 07/2024 due to missing tire pressure monitoring system, and has not been loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profi ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 tonne Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrical: * EBS multi-voltage system with 12 & 24 V electrics Lhjdpfx Agel Tnu Ae Eok * 15-pin power connector * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (activated via reverse gear) ----General Attachments: * Manometer (pressure gauge) for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning boards, front and rear * Front axle plastic mudguards with spray protection * Rear axle straight galvanized steel side skirts with spray protection * Reflective contour tape on the sides and rear * Tool box, black powder-coated galvanized steel, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low Loader Platform: * Front extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-WELDED anti-slip coating on the steel plate of the turntable platform * Hardwood flooring on the running areas of the low-bed platform ----Load Securing (La-Si package consists of): * 1 x 13.4 t UVV lashing ring left & right in front of the headboard carrier * 4 fixing holes each side in the turntable platform, each with 2 t lashing capacity * 1 pair of lashing rings (13.4 t), suspended at the rear left & right in front of the rear carrier * 4 pairs of UVV lashing rings (10 t) per side, pivotable and lowerable, loadable in all directions and recessed into the external frame * 3 stake pockets per side, each offering 2 t lashing capability simultaneously ----Widening Package: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not in the rear slope) * Beam bracket for widenings under the chassis on the left, longitudinally mounted ----Excavator Arm Rest: * Excavator arm rest above the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Ramps: * Hydraulically operated one-piece drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of the ramps made from hardwood * Steel construction prepared for 6-way control valve ----Loading Height: * Loading edge unladen approx. 950 mm +/- 20 mm ----Tyres: * Tyres 235/75 R 17.5 ----Coating/Paintwork: * Chassis, turntable, folding outriggers, mechanical supports, and drive-on ramps hot-dip galvanized * --Axles, air tanks, drawbar painted black-- ----Infos: * Vehicle has a daily registration as of 07/2024, due to the missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf