Müller-Mitteltal 21 To Luftgef. Tandemtieflader Mit 3 Mtr Rampen nakup rabljenega (53.128)

Stanje: rabljeno, največja dovoljena obremenitev: 9.400 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 07/2020, dolžina tovornega prostora: 6.300 mm, širina tovornega prostora: 2.480 mm, Int.-št.: ZANDT Zelo dobro vzdrževana tandem šasija s kesonom ZANDT Cargo * TAT B 110 * Keson * Ojačano leseno dno * Težko nosilne pritrdilne tirnice * Dvoosna tandem os * Široke pnevmatike * Nastavljiva vlečna kljuka * Največja dovoljena masa 11.900 kg * Zelo dobro stanje Možna je menjava staro za novo Financiranje od 3,99% Lrjdeymuz Uspfx Agdsr Pridržujemo si pravico do napak in vmesne prodaje! Podatki v tem oglasu so neobvezujoči opisi in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne prevzema nobene odgovornosti za tipkarske ali prenosne napake. Oprema iz oglasa se preveri posebej. Vsi podatki v oglasih so neobvezujoči! Dostava po celotni Nemčiji na zahtevo Delovni čas: ponedeljek do četrtek od 9:00-17:00, petek od 9:00-14:00 ali po dogovoru!

Stanje: rabljeno, največja dovoljena obremenitev: 9.400 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 07/2020, dolžina tovornega prostora: 6.300 mm, širina tovornega prostora: 2.480 mm, Int. št.: ZANDT zelo dobro vzdrževana tandem ploščadna prikolica ZANDT Cargo * TAT B 110 * ploščad * ojačan lesen pod * pritrdilne tirnice za težke tovore * tandem z dvema osema * široke pnevmatike * nastavljivo vlečno oje * dovoljena skupna masa 11.900 kg * zelo dobro stanje Možnost menjave starega za novo Financiranje od 3,99 % Napake in vmesna prodaja pridržane! Podatki v tem oglasu so nezavezujoči opisi in ne veljajo kot zagotovljene lastnosti. Prodajalec ne prevzema odgovornosti za tipkarske napake ali napake pri prenosu podatkov. Oprema, navedena v oglasu, je treba posebej preveriti. Vsi podatki v oglasih so nezavezujoči! Lrsdpfsymuz Iox Agdsr Dostava po celotni Nemčiji na zahtevo Delovni čas: ponedeljek do četrtek od 9:00 do 17:00 petek od 9:00 do 14:00 in po dogovoru!!!

Stanje: novo, največja dovoljena obremenitev: 16.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profil 30,0: * EBS-E (elektronski zavorni sistem) * RDÜ – sistem za nadzor tlaka v pnevmatikah Lsdpfjq Dyvcjx Agdsrr * Naprava za hitro sprostitev zračnega zbiralnika * Bobnaste zavore * 3 x 11 ton BPW Eco osi * Zračna vzmetenje z dvigalno-spustno napravo * SmartBoard kot informacijsko orodje na prikolici z tipalniki za merjenje tlaka za prikaz skupne obremenitve osi na posamezni skupini osi * Stranska zaščita pred trčenjem * Mehansko nastavljivi paketi opozorilnih tabel spredaj in zadaj * Sprednji, zaprt plastični blatnik in zadnji, ravno pocinkani jekleni odbijač, oba s ščitnikom proti brizganju * Pokrov (vroče pocinkano) za orodno omarico na platformi gosenic * Orodna omarica iz pocinkane jeklene pločevine, približno 650 x 300 x 600 mm (črna, prašno barvana), na desni strani * 15-polni električni vtič * LED-osvetlitev 12 / 24 V * LED-rotacijska luč (odstranljiva) zadaj * Stranske gabaritne luči s funkcijo smernikov * Vlečna priprava s 40 mm vtičnico in nastavitvijo višine prek vzmetne palice in zapornice * Sistem za nadzor tlaka v pnevmatikah z možnostjo prikaza v tovornjaku prek signala EBS (brez namestitve na strani tovornjaka) * Gumijasta obloga na zložljivih rampah in na rampi za nalaganje na levi in desni strani (približno 860 mm dolžine) * Gumijasta obloga na vzdolžnih nosilcih od čelnega do zadnjega nosilca * Trden leseni pod na nosilni površini nizkopedijske platforme * Na obeh straneh po 4 vtičnic za pritrditev z možnostjo hkrati pritrditi 2 toni * Paket La-Si, sestavljen iz: 5 parov pritrdilnih obročev UVV, vrtljivih in spuščajočih, obremenitev v vseh smereh in vgrajenih v zunanji okvir - v vogalih 13,4 tone, sicer 10 ton. * 6 parov mehanskih zložljivih podaljškov za 3 metre celotne širine (vendar ne na zadnji rampi) * Držalo za deske pod nosilno površino v vzdolžni smeri * Opora za valje pred čelnim nosilcem, dvignjena, z eno 6,4 tonsko pritrdilno vtičnico na vsaki strani * Hidravlične zložljive rampe (približno 4.650 x 720 mm) z hidravlično nastavljivim končnim delom in varnostnimi ventili za zadrževanje tovora * Hidravlični stranski premik ramp * Zadnja opora, hidravlična (enostopenjski cilinder) * Hidravlični razdelilnik pretoka na prikolici (pri hidravlični moči črpalke na tovornjaku, večji od 40 l/min, do največ 140 l/min) * Hidravlični nadzorni blok, zaščiten pred brizganjem vode * Dvojna hidravlična napeljava * Nosilna površina nad vrtljivim obročem: približno 1.960 x 2.520 mm, * zadnja nosilna površina: približno 6.500 x 2.520 mm (vključno z rampo za nalaganje 860 mm) * Višina nosilne površine pri obremenitvi približno 890 mm +/- 20 mm, zračna vzmetenje * Podvozje, vrtljiv obroč, opora za valje, zložljivi podaljški in rampe, vroče pocinkani. * Osi, vrtljiv obroč, vlečna priprava, zračni rezervoar, itd. prebarvani v črno barvo * Višina nosilne površine pri obremenitvi: približno 890 mm +/- 20 mm * Novo vozilo z garancijo proizvajalca * Pridržane pravice do sprememb in prodaje * dostava je možna od približno 45. kalendarskega tedna 2026.

Stanje: rabljeno, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2008, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Oprema: ABS, Nemška prikolica, * 30-tonska * Razširljiva na 3 metre Lodoy Trntspfx Agdorr * Vzmetene rampe, * 50-mm vlečni obroč * Zračno vzmetenje, Tehnični pregled možen na novo za doplačilo! Dodatne informacije po telefonu Christian Bredemeier

Stanje: rabljeno, lastna masa: 2.700 kg, največja dovoljena obremenitev: 7.300 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2007, dolžina tovornega prostora: 5.020 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 400 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, mechanical ramps, front support, storage box, height-adjustable drawbar. Body: Tandem low-bed trailer with mechanical loading ramps, 2x BPW axles, drum brakes! Loading height approx. 930 mm! Ramp length approx. 2600 mm! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to change, prior sale, and errors. Lredpfjwvikqex Agdjr

Stanje: rabljeno, lastna masa: 2.910 kg, največja dovoljena obremenitev: 7.590 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 09/2009, naslednji pregled (TÜV): 04/2025, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 450 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: modra, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing rings, underrun protection, front support, rear support, swinging tailgates. Body: Tandem 3-way tipper trailer with ramp recess. Loading ramps available at an extra cost from €900 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Lrjdpfx Agev S H Sfsdsr

Stanje: novo, največja dovoljena obremenitev: 20.500 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 Platform: * EBS (Electronic Braking System) * Emergency release system for spring-loaded brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering device including RTR function * First axle liftable * Last axle is self-steering trailing axle with electro-pneumatic steering lock via reverse gear PIN (Steering lock for trailing axle activated from the tractor for maneuvering purposes—no truck-side installation required—wired to PIN 10 in the 15-pin connector, only for maneuvering and not for use on public roads) * SmartBoard control unit as infotool with pressure sensors for displaying total axle load * Tire pressure monitoring with readout in the truck via EBS signal, no truck-side installation required * Fixed center drawbar with 50 mm flange drawbar eye (loaded 900 mm, mm height adjustment at the head plate) * Mechanical landing gear at the front, mechanical swivel supports at the rear chassis Lsdpfx Agsr Dpzxsdjrr * Hydraulic flow divider * Continuous side walls (without center stanchion) up to the drive-on slope * Folding rear stanchions * Steel rear wall slotted in before rear stanchions * Mechanically adjustable warning panel kit front and rear * Toolboxes made of galvanized steel sheet—black powder-coated—approx. 650 x 300 x 600 mm, right side * 15-pin power connector * LED tail lights * Removable LED rotating beacon incl. bracket and installation * 2 x LED reversing lights at vehicle rear (activated via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wooden floor * 400 mm steel front wall slotted in * Perforated outer frame approx. 45° angled with provisions for mounting 3 t folding lashing rings * In each corner: 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings on each side * Various holes for 1.2 t lashing points in front and rear crossmembers * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-circuit hydraulic control block for potential retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, mechanical rear supports, and loading ramps hot-dip galvanized * Axles, air tanks, flange drawbar eye, and front landing gear painted in black * Hydraulic flow divider in the trailer (for hydraulic pump output in truck from over 40 l/min up to 120 l/min) * New vehicle with manufacturer warranty * Subject to error and prior sale * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 20.500 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lower system featuring RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN (trailing axle lock for maneuvering purposes—no truck-side installation—assigned to PIN 10 in the 15-pin connector, for shunting purposes only, not for use on public roads) * SmartBoard control box as an info tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal, no truck-side installation required * Fixed central drawbar with 50 mm flange towing eye (loaded 900 mm, mm height adjustment at head plate) * Mechanical support windlass at the front, mechanical swing supports at the rear of the chassis * Mechanically adjustable warning sign package at the front and rear * Toolboxes made of galvanized sheet steel—black powder-coated—approx. 650 x 300 x 600 mm on the right side * Hydraulic flow divider * Continuous side walls (without central stanchion) up to the access ramp * Folding rear stanchions * Steel rear wall inserted in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon with holder and installation * 2 x LED reversing lamps at the rear of the vehicle (controlled by reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir timber floor * 400 mm steel front wall plug-in * Perforated outer frame approx. 45-degree angled with provisions for 3 t folding lashing brackets * In each corner, 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings on each side * Various holes in the front and end cross-members for 1.2 t lashing options * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically laterally adjustable * 4-way hydraulic control block for possible retrofit of hydraulic ramp lateral adjustment * Chassis, drawbar, front wall, mechanical rear supports, loading ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange towing eye, and front support windlass painted in black tone * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of more than 40 ltr up to 120 ltr/min) * New vehicle with manufacturer’s warranty Lredpfx Aer Dpz Ajgdor * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: rabljeno, konfiguracija osi: 2 osi, skupna širina: 25.000 mm, skupna višina: 40.000 mm, Leto izdelave: 2014, Oprema: ABS, Za vprašanja v zvezi z vozilom je vam na voljo gospod Seidel (po telefonu). MÜLLER MITTELTAL SF32BM/BT betonska polprikolica Nadgradnja: Liebherr HTM 1004 10m³, osi BPW, bobnaste zavore, vzmetni akumulator, Wabco ABS, 1. os dvižna, zračno vzmetenje, dovoljena skupna masa: 32.000 kg, lastna masa: 6.510 kg, nosilnost: 25.490 kg, profil pnevmatik: 1. os 14-15mm, 2. os 10mm Po želji vam pripravimo ponudbo za leasing ali financiranje. Gospod Seidel vas z veseljem vodi po telefonu. Več informacij najdete na naši spletni strani. ... Napake, spremembe in vmesna prodaja pridržane!!! = Dodatne informacije = Dovoljena skupna masa: 32.000 kg Lodoyfu Sdopfx Agderr Za dodatne informacije se obrnite na gospoda Tobiasa Eberta.

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord infotool installed with pressure sensors for displaying axle group loads * Reflective contour tape on the sides and rear * LED beacon (removable) at the rear * 15-pin electrical connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front enclosed individual plastic mudguards * Rear straight steel mudflaps with spray suppression * Side underrun protection Lsdpfx Agexmpykjdjrr * Extension in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments with lockable folding lids (folding lids open towards the rear) * Chassis made from high-strength fine-grain steel * Floor over bogie platform made of 50 mm softwood, and in the low-bed platform made of 60 mm softwood * Outer planks of the ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t each at the front left and right on the main frame of the bogie platform; one pair of 13.4 t lashing rings at the front and rear sides of outer frame; one pair of 10 t lashing rings on each side foldable and lowerable, loadable in all directions, integrated into the side frame; 5 t bolted lashing rings on the outer frame of the wheel recesses (2 per front wheel recess, 1 per rear); 2 pairs of 6.4 t lashing rings at the excavator stick compartment * 11 pairs of fold-out outriggers for overall width of 3 m (not on the rear incline) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for width-extension planks, steel, mounted crosswise to the loading area in front of the first rear axle * Excavator stick compartment above the rear axle extending to the end of the ramp incline, approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on bogie platform) for transporting wheel loaders with wheelbase 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulic extendable tip, approx. 4,650 x 720 mm * Hydraulic sideward ramp displacement * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded deck height approx. 890 mm ± 20 mm (including 860 mm ramp incline) * Chassis, bogie, fold-out outriggers, rear supports, and access ramps fully hot-dip galvanized * Axles, air tanks, and drawbar painted in black shade * Tires: 235/75R17.5 * Vehicle is fully hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – without truck-side installation * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord infotool installed with pressure sensors for total axle load display per axle group * Reflective contour tape on the sides and rear * LED rotating beacon (removable) at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front closed single plastic mudguards * Straight rear steel mudflaps, each with spray suppression * Side underrun protection * Superstructure in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments including lockable folding lids (folding lids opening to the rear) * Chassis made from high-strength fine-grained steel * Floor over the bogie platform made of 50 mm softwood, and 60 mm softwood in the low loader platform * Outer planks of the drive-on ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, 1 pair each of 13.4 t lashing rings at the front and rear outer frame, 1 pair each of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 5 t lashing rings bolted to the outer frame of the wheel recesses (2 at the front recess, 1 at the rear), 2 pairs of 6.4 t lashing rings on the excavator stick holder * 11 pairs of folding outriggers for a total width of 3 meters (not at the rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the widening boards made of sheet steel, mounted transversely to the loading area in front of the first rear axle * Excavator stick holder above the rear axle up to the end of the approach slope approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on the bogie platform) for transporting wheel loaders with a wheelbase of 3,100 - 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area over the turntable: approx. 2,990 x 2,520 mm Lrodpexmpydofx Agder * Rear loading area: approx. 6,780 x 2,520 mm, loading height loaded approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding outriggers, rear drop-down supports, and drive-on ramps galvanised * Axles, air tanks, and drawbar painted in black * Tires: 235/75R17.5 * Vehicle is galvanised * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stanje: rabljeno, številka stroja/vozila: GE11/142/2022, lastna masa: 6.350 kg, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2008, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, Zelo dobro ohranjeno vozilo iz prve roke Trosnažni nizkopodni priklopnik za prevoz Nizkopodni priklopnik z nakladalno rampo Prevoz težkih tovorov Tip T3 Komakt 30,0 Dolžina 8500 mm Širina 2500 mm Zračno vzmetenje Lrjdpfxsn Aw Hko Agdjr Neto cena za trgovino/izvoz – 15.990 € Pridržujemo si pravico do sprememb, vmesne prodaje in napak ===== Telefon2 Mobilni telefon =====

Stanje: novo, največja dovoljena obremenitev: 10.970 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, KA-TA-R 14.4 - LKW tandem trostrani kiper - Nosivost serijski cca: 11.050 kg - Povećanje ukupne dozvoljene mase na 14,4 t kod guma 285/70R19.5 - Unutrašnje dimenzije: 5.000 x 2.420 x 500 mm - Visina poda pod opterećenjem: 1.040 mm - 1 šasija sa zaštitom od podletanja, vruće pocinkovana - Lakiranje: osovine sa oprugama, vazdušni rezervoari itd. u crnoj boji Lrsdpsxmwiysfx Agdjr - 3 para upuštenih i preklopnih veznih kuka u čeličnom podu, LC 3.000 daN - ABS 2S/2M, 24 volti - 2 podizne opruge za čelične bočne stranice visine 500 mm - 1 centralno zaključavanje levo i desno, njihajuće kod nepreklopnih bočnih stranica Dodatna oprema: 1 par UVV veznih prstenova upuštenih u čelični pod, umesto na čelični pod 1 čelični pod od Hardoxa 450, debljine 4 mm Podešavanje visine vučne ruke preko ugaonog prenosa sa ručnim pogonom umesto serijskog 1 par alu rampi bez ivica (8,0 t/par), 3.500 x 400 x 105 mm pogodno za pneumaticima i guseničarima Kutija za alat

Stanje: rabljeno, Leto izdelave: 2010, Vakuumska cisterna pribl. 6 m³, primerna za Müller-Mitteltal CHK. Vključno z vakuumsko črpalko na pogon preko kardanske gredi ter različnimi cevmi. Ljdpfx Ajx Nl Npegdorr Vakuumska črpalka = Dodatne informacije = Za več informacij se obrnite na Jan-Marc Schwickert.

Stanje: rabljeno, moč: 18 kW (24,47 KM), Leto izdelave: 2003, obratovalne ure: 2.661 h, Oprema: kabina, pogon na vsa štiri kolesa, * 1813 – ID vozila za telefonske povpraševanja * Traktor Egholm 2100 * 3-valjni dizelski motor Kubota, 25 KM * Letnik: 2002 * Delovne ure: 2.661 ur * Pogon na vsa štiri kolesa * Kabina z ogrevanjem * Nadgradnja za čiščenje s 3 metlami * S prikolico * Na vlečnem vozilu: * – Servis izveden * – Vse olja in filtri zamenjani Lsdpfx Agszahtkodjrr * – Nekatere cevi zamenjane * – Črpalka za vbrizgavanje obnovljena * – Tehnični pregled opravljen * – Nemško dovoljenje za promet * Nadgradnja za čiščenje: * Nedavno servisirana * Vse 3 metle so nove!! * Deluje zelo dobro * Takoj pripravljen za uporabo * Dostava po vsej državi na zahtevo! ----naš e-poštni naslov:     naša storitev za vas:       - Pridobitev začasnih ali carinskih registrskih tablic       - Prevoz/dostava po vsej EU       - Carinsko carinjenje vozil v tretjo državo Whatsapp za angleščino, nemščino, ruščino in druge jezike:

Stanje: rabljeno, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2022, Leto izdelave: 2022, Alga TAT B-180, 7,3 m, rampe, dozvoljena ukupna masa 19 t, niskopodni prikolica, Tiefgänger, 1. vlasnik, dobro održavano vozilo. Tehnički opis: Ljdpfx Agezq Hbmoderr Šasija / Ovjes / Broj osovina: ABS, EBS. Utovarni prostor 7.300 mm, niskopodni dio 6.300 mm, zadnji kosina: 1.000 mm. Bočne stranice aluminijumske, visina 400 mm, mogu se preklopiti, ukloniti, djeljive po sredini (Kinnegrip). 8 veznih ušica po strani, svaka s vučnom snagom do 2t. 2 para sanduka za vezivanje naprijed i nazad, svaki kapaciteta 10t. Vučna rudica podesiva po visini / beskonačno, ±150 mm, vučna kuka 50 mm. Rampa u jednom komadu približno 2.500 mm x 500 mm, potpuno skupljiva. 2 preklopne zadnje potpore. EBS i ABS, “GIGANT” osovine, bubanj kočnice, lisnato ogibljenje. Bivša neto cijena novog: 32.700,- € Unatoč najvećoj pažnji moguća je greška u oglasu. Zadržavamo pravo na izmjene i prethodnu prodaju!

Stanje: novo, lastna masa: 640 kg, največja dovoljena obremenitev: 2.360 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 2.820 mm, delovna širina: 2.163 mm, Manufacturer: Humbaur Model: High-loader HT 304121 Permissible total weight: 3,000 kg Payload: 2,360 kg Unladen weight: 640 kg Body dimensions: 4,100 x 2,100 x 350 mm Equipped with light grey tarpaulin and 200 cm tall frame (interior height) Tyres: 14 inch Loading height: 755 mm - V-drawbar, hot-dip galvanised - 13-pin plug and reversing lights - 18 mm strong floor plate - Sidewalls made from anodised aluminium with recessed locks, fully removable - Lashing rings integrated into the V-exterior frame profile, lashing capacity 400 kg per ring, Dekra-approved - 8 lashing eyes - Support wheel - Humbaur multifunction lights integrated into underrun protection Price incl. vehicle registration documents (Zulassungsbescheinigung Part II and COC papers) We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun On request, we can provide a free temporary registration plate. We repair trailers of all manufacturers. Further accessories available on request. Technical modifications, price changes, and errors excepted. No liability for errors or misprints. Features: reversing automatic brake, rubber suspension axle, independent wheel suspension, tall tarpaulin, support wheel, marker lights, V-drawbar hot-dip galvanised, braked, incl. warranty, 13-pin plug and reversing lights, 18 mm strong floor plate, anodised aluminium sidewalls with recessed locks, fully removable, lashing rings integrated into the V-exterior frame profile, lashing capacity 400 kg per ring, Dekra approved, 8 lashing eyes. Lodpjr Eintefx Agderr

Stanje: novo, lastna masa: 700 kg, največja dovoljena obremenitev: 2.650 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: srebrn, gradbena višina: 2.800 mm, delovna širina: 2.163 mm, Manufacturer: Humbaur Model: High-loader HT 354121 Permissible total weight: 3500 kg Payload: 2800 kg Payload with high tarpaulin approx. 2650 kg Unladen weight: 700 kg Unladen weight with high tarpaulin approx. 850 kg Loading dimensions: 4100 x 2100 x 350 mm With high tarpaulin: internal height 220 cm Color: Silver Tyres: 185 R14C 104 load index Loading height: 770 mm Incl. 100 km/h approval Both sides with sliding tarpaulin Tarpaulin silver with frame, internal height 220 cm, Made in Germany Only high-quality truck tarpaulin used (680 g/m²). Tarpaulin color is freely selectable (color chart available by email on request). Custom dimensions and versions available upon request. Lettering available in stencil, screen print, or digital print. Ljdpfx Aefic T Iegderr We would be happy to provide a customized offer. V-drawbar, hot-dip galvanized 13-pin plug and reversing lights 18 mm thick phenolic coated floor plate Side walls made of anodized aluminium with recessed locks, fully removable Lashing rings integrated in the V-exterior frame profile, lashing force 400 kg per lashing ring, Dekra certified Support wheel Price includes vehicle registration document (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun Upon request we provide a free temporary license plate for transport. We repair trailers of all makes. Further accessories available on request. Technical specifications, pricing, and errors subject to change. No liability for mistakes or printing errors. Features: Reverse-automatic brake, rubber suspension axle, independent suspension, high tarpaulin, support wheel, marker lights, hot-dip galvanized V-drawbar, braked, incl. warranty, 13-pin plug and reversing lights, 18 mm thick floor plate, side walls made of anodized aluminium with recessed locks, fully removable, lashing rings integrated in the V-exterior frame profile, lashing force 400 kg per lashing ring, Dekra certified, 8 tie-down rings.

Stanje: novo, lastna masa: 390 kg, največja dovoljena obremenitev: 1.382 kg, skupna masa: 1.800 kg, velikost pnevmatike: 195/50r13, NEW with us + at a SPECIAL PRICE: Immediately available Here you'll find the ideal car trailer for your needs! Perfectly suited for transporting smaller vehicles such as Smart cars, ride-on mowers, motorcycles, machinery, and much more! The trailer offers a high payload capacity of approx. 1382 kg, with a permissible total weight of 1800 kg and an unladen weight of approx. 418 kg. Lrjdpfx Asqwz U Hjgder Standard features include loading ramps and robust coupling eyes to ensure safe transport of your cargo. Make your transport tasks even easier. This trailer can be equipped with various accessories: - Higher side panels, 30 cm - Winch - 100 km/h road approval - Support legs Long axles positioned under the loading platform = reduced overall width + increased usable space Internal width! Tyres: 195/50R13 Automatic jockey wheel Foldable and removable aluminium sidewalls V-drawbar Very robust, recessed tie-down points in the platform Phenolic resin-coated anti-slip plywood floor 13-pin plug + safety lighting + reflectors If you have any questions, please send us a message or give us a call! Technical modifications, price changes, errors and prior sale reserved. No liability is accepted for mistakes or typographical errors.

Stanje: novo, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 20 lashing rings, loading ramps (approx. 3,100 x 750 mm), serrated climbing strips on the outer sides of the ramps and rear slope, laterally adjustable loading ramps, hydraulic ramps, 8 stake pockets, loading height: 900 mm, 2 toolboxes, contour marking according to regulations, incl. axle load indicators, Surcharges for: Front wall steel, galvanized: €500 Hydraulic sliding ramps = Price: €1,000 -- Subject to typographical errors, mistakes, and changes. Example pictures. -- Lredpfx Aezwcrzogdor More data at: ! More details: !

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 7.520 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.280 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, velikost pnevmatike: 245/70 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245/70 R 17,5, velikost zadnje pnevmatike: 245/70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, rampa približno 2.700 mm dolga x 900 mm široka, rampe z rešetkami, nakladalna višina: 840 mm, 10 pritrdilnih obročev po 2,5 t, 8 pritrdilnih obročev po 6 t, jekleni stranski paneli, zložljivi in odstranljivi, lesene deske 50 mm, zadnji del nakladalne površine poševen, notranja širina nakladalne površine 2.480 mm, zadnji stebriček odstranljiv, spredaj prehodno za nakladanje, na voljo tudi z dolžino nakladalne površine 6.300 mm!!, najemna cena od 500 €, -- pridržane pravice do napak, sprememb ter ilustrativnih slik --, Več podatkov pod: !, More Details: ! Lredpfxozvpfxs Agdor

Stanje: novo, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.500 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Chassis: Hot-dip galvanized, wooden floor 70 mm thick, 18 lashing rings, drive-on ramps (approx. 3,100 x 750 mm), climbing strip on ramp exterior and rear slope, laterally adjustable drive-on ramps, hydraulic ramps, 8 stake pockets, loading height: 900 mm, 2 toolboxes, contour marking according to regulation, incl. axle load indicators. Surcharge for: front wall steel-galvanized: €500, hydraulic ramp shifting = price: €1,000. -- Subject to typing errors, mistakes, and changes, sample pictures --, More data at: !, More details: ! Ledozvlxzopfx Agdsrr

Stanje: novo, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 20 lashing rings, loading ramps (approx. 3,100 x 750 mm), serrated climbing strips on the outer sides of the ramps and rear slope, laterally adjustable loading ramps, hydraulic ramps, 8 stake pockets, loading height: 900 mm, 2 toolboxes, contour marking according to regulations, incl. axle load indicators, Surcharges for: Front wall steel, galvanized: €500 Hydraulic sliding ramps = Price: €1,000 -- Subject to typographical errors, mistakes, and changes. Example pictures. -- Lsdpfozr Ui Iox Agdsrr More data at: ! More details: !

Stanje: novo, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.500 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Chassis: Hot-dip galvanized, wooden floor 70 mm thick, 18 lashing rings, drive-on ramps (approx. 3,100 x 750 mm), climbing strip on ramp exterior and rear slope, laterally adjustable drive-on ramps, hydraulic ramps, 8 stake pockets, loading height: 900 mm, 2 toolboxes, contour marking according to regulation, incl. axle load indicators. Surcharge for: front wall steel-galvanized: €500, hydraulic ramp shifting = price: €1,000. -- Subject to typing errors, mistakes, and changes, sample pictures --, More data at: !, More details: ! Lodpfxezr Uizj Agdjrr

Stanje: rabljeno, največja dovoljena obremenitev: 24.000 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2014, naslednji pregled (TÜV): 04/2027, MÖSLEIN 3-osni nizkotovorni priklopnik z rampo, tip TF 3 Lodpszuiz Refx Agdjrr Okvir, v celoti pocinkan. Skupna dolžina: 10.300 mm Nosilna plošča: 5.900 mm Višina nosilne plošče: 860 mm Skupna teža: 24.000 / 30.000 kg Lastna teža: 6.000 kg Nosilnost: 18.000 / 24.000 kg Parabolična vzmetitev Dolge rampe z vzmetnim dvigalom Stransko premikljiv Velik komplet pritrdilnih elementov Žepi za pritrditev na zunanjem okvirju Vlečna kljuka 40 mm Električni priključek, 15-polni Zračni priključek Duomatic Vehikel je na voljo takoj – na voljo so tudi drugi novi in rabljeni 3- in 4-osni nizkotovorni priklopniki.