Fliegl Vts 400 Tieflader Mit Radmulden Luft/ Hydr. nakup rabljenega (15.120)

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing device ----Drawbar / Flange Hitch Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Fittings: Nedpfx Aorwc R Rectewk * Landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, fitted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood floor * Provisions in front of the bulkhead for retrofitting container locks * Bolt-on 400 mm bulkhead made of smooth sheet * Removable rear stanchions, bolted * Drop sides with spring assist ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * 1 x 6.3 t lashing point in each front and rear corner * Various holes in the headboard and rear crossmember for 1.2 t lashing options * Profifix lashing rail centrally positioned along the longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh drive-on ramps, approx. 2,750 x 600 mm (collapsible to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck of over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, drawbar, bulkhead, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoirs, landing gear front, and flange hitch eye painted in black shade * Drop sides painted in RAL 9010 pure white * Painting of the side walls in a RAL color of your choice available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders Nwjdpfxol Tnvgs Actok * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle hydraulically steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED flashing beacon, rear left ----General attachments: * Side underrun protection * Landing gears in the front and mechanical swing supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted on the chassis, right-hand side ----Low-loader platform: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, width = 2,480 mm x height = 500 mm x length = 665 mm, with folding lid * 400 mm high aluminum sideboards (RAL 9010 pure white) on both sides of the fifth wheel platform, foldable and removable * Rear wall – 150 mm high, slotted in * Rear slope on the fifth wheel platform down to the low-bed area, approx. 700 mm long * Fifth wheel platform fitted with 50 mm wooden planks, low-bed area with 60 mm wooden planks * Tread plate above the axles ----Width extensions: * 8 x mechanical folding width extensions to a total width of 3 m, except in the rear slope area (extension planks available with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load securing (lashing package): * On the fifth wheel platform, 2 x 6.3 t lashing eyes each as well as 3 x 5 t lashing bars on each side in the outer frame * In the low-bed area, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, swiveling and retractable, integrated into the outer frame * 2 x 6.4 t lashing eyes on each side and 1 lashing eye at the rear in the excavator trough * 2 x container locks directly after the kick-up section in the low-bed platform ----Excavator trough: * Excavator trough from end of last rigid axle over steering axle up to the end brace, continuous, with internal reinforcement profile, approx. L = 2,450 mm x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer board of the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacities in the truck from over 40 l to 120 l/min) ----Loading dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Coupling height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered v

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal—no in-cab installation required * 15-pin power connector * LED lighting system, 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side walls with spring assist Nsdpfxerwc R Ao Actewk ----Load Securing: * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing points * Profifix lashing rail along the centerline for lashing capabilities up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted in a black shade * Side wall paintwork in RAL 9010 pure white * Painting of the side walls in an RAL color of choice available at an extra charge ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images shown ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection Njdjpk D I Ajpfx Actewk * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026

Stanje: novo, največja dovoljena obremenitev: 23.920 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, NOVO VOZILO Fliegl 3-osni nizkopodni priklopnik tipa DTS 300, vroče pocinkan Skupna masa 24.000 kg / 30.000 kg Nosilnost 17.920 kg / 23.920 kg Nwodpjxb Nmysfx Actjk Lastna teža 6.080 kg Skupna dolžina 10.900 mm Nakladalna dolžina 8.680 mm Nakladalna površina 6.500 mm vključno z 900 mm nakladalnim nagibom Parabolično vzmetenje Dolge rampe 2.800 mm s hidravličnim upravljanjem Razširitev na 3.000 mm z opozorilnimi tablami in rotacijsko lučjo Velik komplet za pritrjevanje z zateznimi točkami 5,0 in 10,0 ton 5 parov žepov za nosilce Vlečni obroč 40 mm plus prevoz/stroški priprave iz skladišča Wiesmoor 1.280,00 €/neto Ponudba najema z odkupom: doba 48 mesecev, preostala vrednost 40 %, predujem samo DDV. Mesečna najemnina: 500,00 EUR

Stanje: novo, največja dovoljena obremenitev: 23.890 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Vehicle from current production NEW VEHICLE Fliegl 3-axle low loader type DTS 300, hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Payload: 17,890 kg / 23,890 kg Unladen weight: 6,080 kg Overall length: 10,900 mm Load length: 8,680 mm Loading bed: 6,500 mm incl. 900 mm approach ramp Loading height: 860 mm Air suspension with lift and lower valve Long loading ramps 2,800 mm, hydraulically operated Extendible width to 3,000 mm with warning signs and rotating beacon Heavy-duty lashing package with 5.0 and 10.0 t lashing points 5 pairs of stake pockets Drawbar eye 40 mm Nwodsk N Adkepfx Actok plus delivery/transport fee ex-stock Wiesmoor EUR 1,280.00 net Hire purchase offer: Term 48 months, final residual value 40%, down payment VAT only. Monthly instalment: EUR 609.00

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300 Vehicle fully hot-dip galvanized Gross weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900 / 23,900kg Overall length: 10,890mm Loading length: total 8,670mm; 6,500mm low bed including rear bevel / 2,170mm gooseneck Width: 2,520mm Loading height: 860mm Further information: plus freight/preparation ex stock location 26639 Wiesmoor, EUR 1,280.00 net Leasing offer: Term 48 months, down payment only the VAT. Residual value 40% Monthly installment: EUR 569.00 Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support Wheel chocks with holders Aluminum side underrun protection Full-width rear mudflaps (not in combination with forklift mounting) Semi-shell fenders on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axles 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable outriggers to 3,000 mm (not at rear bevel). (Track width of construction machinery or vehicles to be transported must not exceed outer frame width of 2,550 mm) Central storage compartment for wooden planks on the loading area 70 mm wooden planks for extension to 3,000 mm Lashing points for low-loader 1 pair of lashing cutouts in the front longitudinal beam on the gooseneck, each 10 t 4 pairs of lashing holes in the outer frame of the gooseneck, each 5 t (for attaching tie-down straps) 7 pairs of inlaid lashing rings on top and side of outer frame, each 10 t (1 at gooseneck front, 6 in low bed) First lashing ring 250 mm from front and last max. 250 mm from rear, lashing point spacing not greater than 1,100 mm 5 pairs of inlaid ring lashing points in outer frame, each 5 t (convertible to stake pockets) 2 additional pairs of foldable lashing rings, each 10 t (1 at gooseneck - protruding, 1 recessed in floor behind last axle) Drawbar assembly for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring mechanism Axles & Suspension Drum brake axles, brand per manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension with raise & lower valve Wheels and tires 235/75 R 17.5'', per manufacturer’s choice Steel twin wheels, factory silver finish Braking system Dual-line compressed air brake system Spring-operated parking brake Vehicle stability control system Axle load detection via EBS-Canbus signal for display in cab (truck must be pre-equipped, not installed/no certified scale) 2 non-interchangeable coupling heads at front with connection lines to tractor unit Njdpfx Acov D T R Eotewk 24V EBS, electronic braking system with EBS connector at front and connecting cable Note: The trailer may only be towed by towing vehicles that ensure proper ABS function! Electrics 24V, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane control lamps at rear 2 x 7-pin non-interchangeable connectors at front, with connection cable 1 LED revolving beacon with holder, switched via parking light, removable 2 pairs of warning panels, double LED-lit and extendable to 3,000mm Floor Gooseneck front with steel/chequer plate cover Storage compartment recessed in gooseneck ramp Subsequent area with approx. 70 mm softwood floor, wheel arch area with steel/chequer plate Rear bevel with 70 mm softwood flooring Low-loader platform including rear bevel: 6,500mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, side mounted

Stanje: novo, največja dovoljena obremenitev: 32.100 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, NOVO VOZILO Fliegl 3-osni polnizkopodni priklopnik z rampami Tip SDS 470 T Skupna masa 41.000 kg / 47.000 kg Lastna teža 8.900 kg Nosilnost 32.100 kg / 38.100 kg Skupna dolžina 13.300 mm Nakladalna površina 9.200 mm Rampi 3.000 mm x 750 mm s hidravličnim upravljanjem Njdpfok N Afljx Actowk Zračno vzmetenje z ventili za dviganje in spuščanje Izrez za roko bagra Velik komplet za pritrjevanje tovora Lesena tla 70 mm SAF osi, tretja os kot sledilno krmiljena os Ponudba leasinga: doba trajanja 48 mesecev, 40% preostala vrednost, predplačilo samo DDV. Mesečna rata EUR 999,00 (plačljivo samo neto)

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle compensation ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS Tire Pressure Monitoring System * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable warning beacon * 15-pin power connector ----General Equipment: * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning panel kits front and rear * VA closed plastic mudguards in front and straight galvanized steel skirts at the rear, each with spray protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox in the turntable platform * Four stake pockets per side (stakes not included), also with lashing function ----Load Securing (La-Si package consisting of): * 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 6 pairs of UVV folding and retractable lashing rings, loadable in all directions and countersunk into the outer frame * 13.4 t at corners, 10 t otherwise ----Widening: * 6 pairs of manual folding outrigger arms for 3 m overall width (not on the sloped rear section) * Widening boards stowed in the center of the loading area ----Ramps: Nsdpfel Th Nnjx Actowk * Hot-dip galvanized one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way hydraulic control unit pre-installed for optional hydraulic side shift of ramps ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry incline) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Finish: * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex stock Egestorf

Stanje: novo, lastna masa: 410 kg, največja dovoljena obremenitev: 1.590 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.010 mm, širina tovornega prostora: 1.530 mm, višina nakladalnega prostora: 1.200 mm, prostornina tovornega prostora: 5,4 m³, barva: drugo, gradbena višina: 1.740 mm, delovna širina: 2.040 mm, Manufacturer: Brenderup Model: Brenderup 2300S, 2300STB2000 Low-bed Trailer, Steel Permissible total weight: 2,000 kg, braked tandem Payload: 1,590 kg Unladen weight: 410 kg Box dimensions: 3,010 x 1,530 x 400 mm With 800 mm high mesh side extension Tyres: 13 inches Loading height: 540 mm With fold-down front wall 13-pin connector including overrun brake with reverse automatic Price includes registration documents (Certificate of Registration Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Unsinn, and Neptun Upon request, we provide a free transit license plate. We repair trailers of all manufacturers. Additional accessories available on request. Technical modifications, price changes, and errors excepted. No liability for errors or misprints. Features: Reverse automatic, rubber-cushioned axle, independent suspension, jockey wheel, marker lights, fully hot-dip galvanized frame, braked, includes warranty. Brenderup uses galvanized components for optimal corrosion protection, robust drop-latch fasteners, V-shaped safety drawbar, 6 internal lashing rings, braked, 13-pin plug with reversing light, protected multifunction rear lamp, 40 cm steel side panels, with 800 mm mesh side extension. Nsdjuy Hwnopfx Actewk

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange towing eye Nodpfx Acsq Dyvyjtjwk ----Lighting / Electrical: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Trapezoidal-profiled, fold-down steel side walls with drop-side spring assists * Steel rear wall, can be stowed between the ramp holders when not in use, inside in front of the bulkhead * Bolted rear stanchions * Rear drive-on slope approx. 860 mm ----Load Securing: * Perforated outer frame, edged at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t fold-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes for 1.2 t lashing options in bulkhead and rear crossmember ----Ramps: * One-piece mechanical grating drive-up ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible down to 20 mm) ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, rear wall, tailgate, and drive-up ramps * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost ----Info: * — Reinforced and certified body according to EN 12642 XL including load securing certificate — * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Braking System: * EBS Electronic Braking System * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension Nodpfx Acepk Dv Retjwk ----Tow Bar / Flange Towing Eye: * Height-adjustable tow bar, adjustable by 300 mm * Tow bar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * Tire pressure monitoring system (TPMS) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right side of the headboard * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Trapezoidal profiled drop-side walls made of steel, foldable with drop-side spring assist * Steel rear wall insertable between ramp mounts; when not in use, stowed inside in front of the headboard * Bolt-on rear posts * Rear approach angle approx. 860 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Possible installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing point in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as tow bar, headboard, rear wall, tailgate, and ramps * Side wall color RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Approx. 30 mm thick hardwood flooring Loading platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - 235/75 R17.5 3PMSF tyres, manufacturer of our choice - TPMS – Tire Pressure Monitoring System according to ECE R 141 - Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992 - The tractor unit must be capable of transmitting and displaying these data for correct indication. Axles: - BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicators - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made from high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: Nwedjw Tpq Dspfx Actok - Entire steel structure automatically shot-blasted with shot-blast machine after welding - Second blasting with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection - Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavities sealed with special wax Including the following accessories: - On both the gooseneck and at the rear left and right, one holder for warning boards, including socket - Spare wheel holder in front of the bulkhead (without spare wheel) - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized connection panel at the front - Galvanized folding supports under the rear slope of the loading platform - Hardwood rear impact protection from gooseneck rear wall to loading platform - 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN) - On the gooseneck, aluminum side and rear walls

Stanje: novo, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 11.940 mm, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 235/75R17,5, barva: drugo, Leto izdelave: 2026, 4-osna nizkopodna prikolica, vroče cinkana, razširljiva na 3000 mm. Jeklene rampe dolžine 3000 mm, širine 750 mm, hidravlično upravljanje s hidravličnim bočnim pomikom. Jama za rovokopačev izpust dolžine 1800 mm, širine cca 650 mm in globine 150 mm. Dno iz mehkega lesa debeline 70 mm. Njdpfoyxft Tox Actewk Vozilo na zalogi.

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * Profil PT 30: ----Zavore: * EBS (električni zavorni sistem) * Naprava za hitro sprostitev zavor za vzmetne akumulatorje * Bobnaste zavore ----Osi: * 3 x 11 ton, osi Gigant ----Vzmetenje: * Zračno vzmetenje s sistemom za dvigovanje in spuščanje ter ventilom RtR ----Povezava: * Povezava dolžine 1.200 mm s 40 mm vlačilnim ušesom in nastavitvijo višine s pomočjo vzmetne palice in objemke ----Elektrika / osvetlitev: * Pametna plošča, nameščena na prikolici, kot informacijsko orodje (za prikaz obremenitve osi – ločeno spredaj in zadaj) * Nadzor tlaka v pnevmatikah z možnostjo prikaza v tovornjaku prek signala EBS, brez dodatne namestitve v tovornjaku * 15-polni električni vtič * LED-osvetlitev 12 / 24 V * LED-rotacijska svetilka (odstranljiva) zadaj ----Splošni dodatni deli: * Stranski zaščitni element * Stranske podpore zadaj na okvirju * Mehansko nastavljivi paketi opozorilnih tabel spredaj in zadaj * Sprednji plastični četrtni blatniki z zaščito proti brizganju * Zadnji ravni jekleni ploščati ščiti z zaščito proti brizganju * Orodjarna škatla iz pocinkane jeklene pločevine, približno 650 x 300 x 600 mm, črna, prašno lakirana, na desni strani * Predal v podvozi za dodatno opremo s pokrovom, 2 kosa kontinentalskih zapah, trajno vgrajen (neposredno za podvozjem) * 2 kosa stopnic, pocinkanih, na podvozju, levo in desno ----Površina nizkega prikolice: * ROBOTER: varjena protidrsna prevleka na jekleni plošči podvozja (izstopajoči varjeni robovi) ----Varnostno pripenjanje tovora (paket za pripenjanje tovora, sestavljen iz): * 2 pritrdilne točke (13,4 tone) spredaj levo in desno na nosilcu čelne stene * Spredaj in zadaj 1 par UVV prstenov (13,4 tone), poleg tega stransko po 3 pare UVV prstenov (10 ton), z možnostjo nagibanja in spuščanja, obremenljivi v vse smeri in vgrajeni v zunanji okvir * Stransko po 3 žepe za pasove z možnostjo pripenjanja 2 ton * Profifix palica za pripenjanje v vzdolžni osi na sredini, v ravni površini za možnost pripenjanja do LC 3000 daN ----Razširitev: * 6 parov mehanskih iztegnih podpor za 3 m skupne širine (vendar ne na zadnji poševnici) * Razširitvene deske, položene v sredini tovorne površine ----Rampe: * hidr. enodelne rampe, približno 3.000 x 720 mm * mehansko, stransko nastavljive * Krmilni blok 4-na, za poznejšo vgradnjo hidravlične premika rampe ----Nosilec za bager: * Nosilec za bager čez zadnjo os, neprekinjen do končnega nosilca (skupna dolžina približno 2.100 mm) * 2 para pritrdilnih točk LC 6400 daN v nosilcu za bager, stransko v vzdolžnem okvirju ----Višina nakladanja: * obremenjen približno 910 mm +/- 20 mm zračno vzmetenje ----Lakiranje: Nwjdpfxsxptn Re Actok * Podvozje, podvozje, iztegnine, podpore in rampe so vroče pocinkani * Osi, vrtljivi obroč, rezervoar za zrak, vlečna vilica so pobarvane v črni barvi ----Informacije: * Novo vozilo z garancijo proizvajalca * Napake in vmesna prodaja so pridržane ----Čas dostave: * dobavljivo od približno 45. tedna leta 2026

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * Profil PT 30: Nsdpfetplwisx Actjwk ----Zavore: * EBS (električni zavorni sistem) * Naprava za izpustitev zavor v sili za vzmetne zavorne cilindre * Bobnaste zavore ----Osi: * 3 x 11 ton, osi Gigant ----Vzmetenje: * Zračno vzmetenje z dvigom in spuščanjem ter ventilom RtR ----Povezava vlečnega vozila: * Povezava vlečnega vozila dolžine 1.200 mm s 40 mm vtičnico in nastavitvijo višine s pomočjo vzmetne povezave in zapornice ----Elektrika / osvetlitev: * Pametna plošča, nameščena na prikolici kot informacijski prikazovalnik (za prikaz obremenitve osi - ločeno spredaj in zadaj) * Nadzor tlaka v pnevmatikah z možnostjo prikaza v vozilu prek signala EBS brez dodatne namestitve v vozilu * 15-polni vtič * LED osvetlitev 12 / 24 V * LED rotacijska svetilka (odstranljiva) zadaj ----Splošni dodatni deli: * Stranska zaščita pred trčenjem * Podpirala na zadnji strani okvirja * Mehansko nastavljivi paketi opozorilnih tablic spredaj in zadaj * Sprednji plastični blatniki * Zadnji ravni jekleni zaščitni paneli * Orodjarna škatla iz pocinkane jeklene pločevine, približno 650 x 300 x 600 mm, črna, barvana s praškom, na desni strani * Škatla v podvoju za dodatke s pokrovom, 2 varnostni ključavnici, trajno vgrajeni (neposredno za platformo podvoja) * 2 stopnici, pocinkani, na podvoju, levo in desno ----Površina nizkonadvozne prikolice: * Varjena protidrsna površina ROBOTER na jekleni plošči podvoja (izstopajoče varjene brazde) ----Varovanje tovora (paket za varovanje tovora, sestavljen iz): * 2 pritrdilne točke (13,4 tone) spredaj levo in desno na nosilcu čelne stene * 1 par UVV pritrdilnih obročev (13,4 tone) spredaj in zadaj ter na vsaki strani 3 pari UVV pritrdilnih obročev (10 ton), vrtljivi in spustljivi, obremenljivi v vse smeri in vgrajeni v zunanji okvir * Na vsaki strani 3 žepov za pritrditev z istočasno možnostjo pritrditve z 2 tonami * Profifix letve za pritrditev v vzdolžni osi na sredini, v ravni površini za možnost pritrditve do 3000 daN ----Širitev: * 6 parov mehanskih iztegnih rok za 3 metre skupne širine (vendar ne na zadnji strani) * Plošče za širitev, položene na sredino tovorne površine ----Rampe: * Hidravlične, enodelne rampe, približno 3.000 x 720 mm * Mehansko, stransko nastavljive * Blok za upravljanje s 4 izhodi za poznejšo nadgradnjo hidravličnega premika ramp ----Nosilec za bager: * Nosilec za bager, ki se razteza čez zadnjo os do končnega nosilca (skupna dolžina približno 2.100 mm) * 2 para pritrdilnih točk, 6400 daN, na nosilcu za bager, na strani v vzdolžnem okvirju ----Višina tovorne površine: * obremenjeno približno 910 mm +/- 20 mm, zračno vzmetenje ----Barvanje: * Okvir, podvozje, iztegni roki, podpirala in rampe so vroče pocinkani * Osi, vrtilni obroč, zračni rezervoar, vlečna prikolica so pobarvani v črni barvi ----Informacije: * Novo vozilo z garancijo proizvajalca * Napake in medprodaja pod pridržkom ----Dobavni rok: * dostavljivo od približno 45. tedna 2026

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting/lowering system and RtR valve * Smard board for payload weighing * Warning sign kits, front and rear * Reflective contour tape on the sides and rear * Removable rotating beacon (rear) * LED lighting * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel sheet and basket-type spare wheel holder, mounted right side Nwedpol Tik Njfx Actjk * Front: closed single plastic mudguard * Rear: straight steel mudguards, each with spray suppression * Side underrun protection * Bogie platform extension by 520 mm with 45° corners, 3 integrated lockable storage compartments with lids * Chassis made of high-strength fine-grained steel * 50 mm softwood floor over bogie platform, 60 mm softwood on low-bed platform * Outer rails on ramps made of hardwood * 4 stake pockets per side (no stakes included); 2 t lashing possible at each * Load securing package: 2 lashing eyes (6.4 t) front left/right on main frame of bogie platform * 2 pairs of lashing rings (13.4 t) on outer frame front/rear per side; 4 pairs of lashing rings (10 t), swing-out and lowerable per side (front/rear) * All lashing points loadable in all directions and recessed into outer frame * 2 pairs of lashing rings (6.4 t) in excavator arm rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not at rear slope) * Extension planks stored left side in a storage box * Excavator arm rest above rear axle to end of rear slope, approx. 2,100 x 740 x 190 mm * Rear mechanical fall supports * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm, incl. hydraulic lateral ramp adjustment & load-holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/-20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, bogie, ramps, outriggers and mechanical fall supports hot-dip galvanized * Axles, drawbar, air reservoir and turntable in black finish * Tires: 235/75 R 17.5 * New vehicle, no initial registration, manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, A7

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lowering system and RtR valve * Smard board for load weight determination * Warning sign packages front & rear * Reflective contour marking tapes on sides and rear * Rotating beacon (removable) at rear * LED lights * Straight drawbar with 50 mm towing eye and continuously adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at front * Straight rear steel splash guards, each with spray suppression * Side underrun protection * Turntable platform front extension by 520 mm with 45° corners and 3 flush storage compartments with lids, lockable * Chassis made of high-strength fine-grained steel Nwedpel Tphrefx Actek * Decking above turntable platform: 50 mm softwood, in low-bed platform: 60 mm softwood * Outer planks of access ramps: hardwood * Each side features 4 stake pockets (stakes not included), with simultaneous 2 t lashing points * Lashing package includes: 2 lashing rings 6.4 t, front left and right on main frame of turntable platform * On sides, front & rear, 2 pairs of 13.4 t lashing rings on outer frame; sides each with 4 pairs of 10 t lashing rings, pivoting & lowerable * Loadable in all directions, recessed in the outer frame * 2 pairs of 6.4 t lashing rings on the excavator stick rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not in the rear slope) * Extension planks stored left side in a stowage compartment * Excavator stick rest above rear axle to rear slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports, rear * Hydraulic folding ramps with hydraulic tip section approx. 4,650 x 720 mm including lateral hydraulic ramp shift & load holding valve * Load area over turntable: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, ramps, outrigger arms, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air reservoir, and turntable painted in a black tone * Tires: 235/75 R 17.5 * New vehicle, not previously registered, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord infotool installed with pressure sensors for displaying axle group loads Nsdpoxmpykjfx Actewk * Reflective contour tape on the sides and rear * LED beacon (removable) at the rear * 15-pin electrical connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front enclosed individual plastic mudguards * Rear straight steel mudflaps with spray suppression * Side underrun protection * Extension in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments with lockable folding lids (folding lids open towards the rear) * Chassis made from high-strength fine-grain steel * Floor over bogie platform made of 50 mm softwood, and in the low-bed platform made of 60 mm softwood * Outer planks of the ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t each at the front left and right on the main frame of the bogie platform; one pair of 13.4 t lashing rings at the front and rear sides of outer frame; one pair of 10 t lashing rings on each side foldable and lowerable, loadable in all directions, integrated into the side frame; 5 t bolted lashing rings on the outer frame of the wheel recesses (2 per front wheel recess, 1 per rear); 2 pairs of 6.4 t lashing rings at the excavator stick compartment * 11 pairs of fold-out outriggers for overall width of 3 m (not on the rear incline) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for width-extension planks, steel, mounted crosswise to the loading area in front of the first rear axle * Excavator stick compartment above the rear axle extending to the end of the ramp incline, approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on bogie platform) for transporting wheel loaders with wheelbase 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulic extendable tip, approx. 4,650 x 720 mm * Hydraulic sideward ramp displacement * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded deck height approx. 890 mm ± 20 mm (including 860 mm ramp incline) * Chassis, bogie, fold-out outriggers, rear supports, and access ramps fully hot-dip galvanized * Axles, air tanks, and drawbar painted in black shade * Tires: 235/75R17.5 * Vehicle is fully hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – without truck-side installation * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord infotool installed with pressure sensors for total axle load display per axle group * Reflective contour tape on the sides and rear * LED rotating beacon (removable) at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front closed single plastic mudguards * Straight rear steel mudflaps, each with spray suppression * Side underrun protection * Superstructure in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments including lockable folding lids (folding lids opening to the rear) * Chassis made from high-strength fine-grained steel * Floor over the bogie platform made of 50 mm softwood, and 60 mm softwood in the low loader platform * Outer planks of the drive-on ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, 1 pair each of 13.4 t lashing rings at the front and rear outer frame, 1 pair each of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 5 t lashing rings bolted to the outer frame of the wheel recesses (2 at the front recess, 1 at the rear), 2 pairs of 6.4 t lashing rings on the excavator stick holder * 11 pairs of folding outriggers for a total width of 3 meters (not at the rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the widening boards made of sheet steel, mounted transversely to the loading area in front of the first rear axle * Excavator stick holder above the rear axle up to the end of the approach slope approx. 2,300 x 740 x 190 mm Nwedpfx Asxmpydsctjk * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on the bogie platform) for transporting wheel loaders with a wheelbase of 3,100 - 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area over the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loading height loaded approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding outriggers, rear drop-down supports, and drive-on ramps galvanised * Axles, air tanks, and drawbar painted in black * Tires: 235/75R17.5 * Vehicle is galvanised * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 27.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2019, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 13.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Fliegl SDS410 nizkopodna prikolica s stranskimi platni, tip Jumbo, za prevoz viličarjev. Nedpfxjzwaf Sj Actowk 1. os: dvižna os / 3. os: usmerjena SAF bobnaste zavore Nakladalna rampa / EcoLift – dvižna streha / Razširitev zadnjega podvoja Dovoljena skupna masa: 39.000 kg, Lastna masa: 11.500 kg, Nosilnost: 27.500 kg, Višina sedla brez obremenitve: pribl. 1.185 mm, SAF osi, 1. os: dvižna os, 3. os: usmerjena, (z avtomatskim sistemom za preprečevanje neželenega premikanja med vzvratno vožnjo, ki se aktivira preko luči za vzvratno vožnjo in dodatne funkcije blokade, ki se upravlja na vozilu s pomočjo gumba) Zračna vzmetenje, Bobnaste zavore, Zavorna sistema HALDEX, Edscha ponjava, EcoLift – dvižna streha, ki se lahko dvigne za pribl. 380 mm, na obeh straneh, s pomočjo plinskih vzmetnih blažilnikov, Mehanska razširitev zadnjega podvoja za 400 mm na vsaki strani, za lažje nakladanje in razkladanje, Stranska platna – drsna, Podvozni ščit na levi, desni in zadnji strani, 2x podpirala s ročico spredaj, 2x podpirala s pločevino zadaj, 2x LED luči za vzvratno vožnjo zadaj, 2x predal na levi, 1x predal na desni, Zračni priključek – sklopka (rdeča + rumena), 2x 7-polni vtič, ABS, EBS, ALB, Pripajalna letev na sredini, Nakladalne rampe – valovita pločevina in rešetasta pločevina, Označba za presežno širino spredaj in zadaj, 9x pritrdilnih točk + 7x pritrdilnih lukenj na vsaki strani (nizkopodna prikolica), 4x pritrdilnih točk + 2x pritrdilnih lukenj na vsaki strani (gosi vrat), Medosjna razdalja: 6.450 + 1.330 + 1.800 mm, Zunanje mere: 14.100 x 2.550 x 4.000 mm, Nosilec za rezervno kolo, vključno z rezervnim kolesom, Pnevmatike: 235/75R17,5 na jeklenih platiščih, Globina profila pnevmatik – leva stran – spredaj – zunanja stran: 8 mm, Globina profila pnevmatik – leva stran – spredaj – notranja stran: 8 mm, Globina profila pnevmatik – leva stran – sredina – zunanja stran: 7 mm, Globina profila pnevmatik – leva stran – sredina – notranja stran: 8 mm, Globina profila pnevmatik – leva stran – zadaj – zunanja stran: 7 mm, Globina profila pnevmatik – leva stran – zadaj – notranja stran: 11 mm, Globina profila pnevmatik – desna stran – spredaj – zunanja stran: 8 mm, Globina profila pnevmatik – desna stran – spredaj – notranja stran: 7 mm, Globina profila pnevmatik – desna stran – sredina – zunanja stran: 8 mm, Globina profila pnevmatik – desna stran – sredina – notranja stran: 7 mm, Globina profila pnevmatik – desna stran – zadaj – zunanja stran: 7 mm, Globina profila pnevmatik – desna stran – zadaj – notranja stran: 7 mm, Dodatna oprema: Skupna dolžina: pribl. 13.800 mm, Skupna širina: maks. 2.550 mm, Skupna višina: pribl. 4.000 / 4.040 mm, Dolžina gosjega vratu: pribl. 4.050 mm, Notranja dolžina nizkopodnega dela, vključno z naklonom zadaj: pribl. 9.500 mm, Notranja širina: pribl. 2.480 mm, Stranska višina nizkopodnega dela: pribl. 3.000 mm, Notranja višina gosjega vratu: pribl. 2.590 mm, Višina nakladanja v nizkopodnem delu: pribl. 920 mm, Višina sedla: pribl. 1.200 mm, Sprednja širina kota: pribl. 2.040 mm, Podvozje Jumbo – prikolica s sedlom: Za prevoz gradbenih strojev do 32.000 kg, Nakladalna plošča zgoraj zaprta s jeklom/valovito pločevino, Zadnji podporni sistem, zložljiv, Bočni zaščitni elementi iz aluminija, Nosilec za rezervno kolo za 1 rezervno kolo, s setom za pritrditev kolesa, Omega letve v nizkopodnem delu na spodnji strani zunanjega okvirja, Pritrdilne točke – gosi vrat: 4 pari 5-tonskih pritrdilnih točk, vgrajenih v zunanji okvir, 2 pari pritrdilnih ušes

Stanje: rabljeno, največja dovoljena obremenitev: 27.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2019, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 13.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Fliegl SDS410 nizkopodna prikolica z ogrodjem Jumbo za transport vilicarskih vozil 1. os: dvižna os / 3. os: s prilagodljivim krmiljenjem / osi SAF s bobnastimi zavorami Dostopna rampa / EcoLift – dvižno ogrodje / Širitev zadnjega ogrodja Dovoljena skupna masa: 39.000 kg, Lastna masa: 11.500 kg, Nosilnost: 27.500 kg, Višina sedla brez obremenitve: približno 1.185 mm, Aksi SAF, 1. os: dvižna os, 3. os: s prilagodljivim krmiljenjem, (z avtomatsko zaporo za vožnjo nazaj preko luči za vzvratno vožnjo in dodatne funkcije blokade, na vozilu prek gumba) Zračna vzmetenje, Bobnaste zavore, Zavorni sistem HALDEX, Pokrov Edscha, EcoLift – dvižno ogrodje, dvig do približno 380 mm, obojestransko, z oporo s plinskimi blažilniki, Širitev zadnjega ogrodja, mehansko za 400 mm na vsaki strani, za nakladanje in razkladanje, Ponavljajoča se ogrodna ponjava, Zaščita proti podiranju, levo, desno in zadaj, 2x oporni nogi spredaj, 2x oporni nogi zadaj, 2x LED luči za vzvratno vožnjo zadaj, 2x škatle za orodje levo, 1x škatla za orodje desno, Priključek za zračni sistem, priklopna glava (rdeča + rumena), 2x 7-polni vtič, ABS, Nwsdezvz T Ispfx Actok EBS, ALB, Pripajalna letev v sredini, Dostopne rampe iz valovite in rešetkaste pločevine, Označitev za presežno širino, spredaj in zadaj, 9x pritrdilnih točk + 7x pritrdilnih odprtin na vsaki strani nizkopodnega prikolice, 4x pritrdilnih točk + 2x pritrdilnih odprtin na vsaki strani podaljšane osi, Medosna razdalja: 6.450 + 1.330 + 1.800 mm, Zunanje mere: 14.100 x 2.550 x 4.000 mm, Nosilec za rezervno kolo, vključno z rezervnim kolesom, Pnevmatike: 235/75R17,5 na jeklenih platiščih, Globina profila pnevmatik, leva sprednja zunanja stran: 8 mm, Globina profila pnevmatik, leva sprednja notranja stran: 8 mm, Globina profila pnevmatik, leva srednja zunanja stran: 7 mm, Globina profila pnevmatik, leva srednja notranja stran: 8 mm, Globina profila pnevmatik, leva zadnja zunanja stran: 7 mm, Globina profila pnevmatik, leva zadnja notranja stran: 11 mm, Globina profila pnevmatik, desna sprednja zunanja stran: 8 mm, Globina profila pnevmatik, desna sprednja notranja stran: 7 mm, Globina profila pnevmatik, desna srednja zunanja stran: 8 mm, Globina profila pnevmatik, desna srednja notranja stran: 7 mm, Globina profila pnevmatik, desna zadnja zunanja stran: 7 mm, Globina profila pnevmatik, desna zadnja notranja stran: 7 mm, Dodatna oprema: Skupna dolžina približno: 13.800 mm, Skupna širina največ: 2.550 mm, Skupna višina približno: 4.000 / 4.040 mm, Dolžina podaljšane osi približno: 4.050 mm, Notranja dolžina nizkopodnega prikolice vključno z zadnjim nagibom približno: 9.500 mm, Notranja širina približno: 2.480 mm, Stranska višina dostopa nizkopodnega prikolice približno: 3.000 mm, Notranja višina podaljšane osi približno: 2.590 mm, Višina nakladanja v nizkopodnem prikolici približno: 920 mm, Višina sedla približno: 1.200 mm, Sprednja mera vogala približno: 2.040 mm, Podvozje Jumbo, prikolica s podvojem: za transport gradbenih strojev do 32.000 kg, Rampa zgornja zaprta s jeklom/valovito pločevino, Zadnji oporniki, zložljivi, Bočna zaščita proti podiranju, aluminijasta, Nosilec za rezervno kolo za 1 rezervno kolo, z kompletom za pritrditev kolesa, V nizkopodnem prikolici Omega tir stransko spodaj na zunanjem okvirju, Pritrdilne točke podaljšane osi: 4 pari 5-tonskih pritrdilnih točk, vgrajenih v zunanji okvir, 2 para pritrdilnih gliv, vgrajenih zgoraj in stransko v zunanji okvir, Nizkopodna prikolica: 8 p

Stanje: rabljeno, največja dovoljena obremenitev: 8.375 kg, skupna masa: 12.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2011, dolžina tovornega prostora: 7.290 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.580 mm, prostornina tovornega prostora: 47 m³, skupna širina: 2.550 mm, skupna višina: 3.600 mm, Oprema: ABS, Kesonska nadgradnja s ponjavo in snemljivimi stranicami, s stranskimi drsnimi ponjavami (Curtainsider), drsna streha, zadnja dvokrilna vrata z zapiralom na vrtljivo ročico, aluminijaste stranske stene višine 500 mm, protizdrsna vezana tla, pritrdilne ušesca, nosilec rezervnega kolesa pod nadgradnjo, SAF os(i), bobnasta zavorna naprava, zračno vzmetenje z možnostjo dviga/spuščanja. Vozilo je lahko polepljeno z oglaševalskimi nalepkami in/ali napisano. SI87036 Nsdpfozc Tipjx Actewk Naša ponudba je načeloma brez novega TÜV pregleda. Če želite novo TÜV homologacijo, vam z veseljem pripravimo ponudbo naših partnerskih servisov! Vozilo je lahko polepljeno z reklamnimi nalepkami in/ali napisano. Veljajo naši splošni pogoji dobave in plačila. Z veseljem vam pripravimo financiranje ali leasing za ta objekt. Kontaktirajte nas!

Stanje: novo, lastna masa: 4.110 kg, največja dovoljena obremenitev: 10.290 kg, skupna masa: 14.400 kg, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 900 mm, vzmetenje: jeklo, velikost pnevmatike: 385/55 R 19,5, barva: oranžna, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: v transportu / v tranzitu, 2 osi, osi SAF, vzmetenje s listnatimi vzmetmi, ABS (protiblokirni sistem), pritrdilne točke za pasove, podpora na zadnji strani, nihajna vrata, nastavljiva vlečna prikolica, odstranljive stranske ograje Nadgradnja: s podaljšanimi stranskimi ograjami, jeklene stranske ograje, ki se odklopijo in so podprte z vzmetmi, skoraj novo stanje, bobnaste zavore, prostor za rampo, doplačilo za R-kolo 300 €, doplačilo za rampo 1.000,00 €, višina nakladalne površine 1,08 m, okvir pocinkan, novo vozilo iz skladišča, registrirano leta 2023, podatki so podložni spremembam, saj je vozilo v transportu! PODATKI O DODATNI OPREMI SO NAVEDENI BREZ GARANCIJE, pridržane spremembe, medprodaja in napake! Nwodpfxszvzgbs Actek

Stanje: novo, lastna masa: 3.020 kg, največja dovoljena obremenitev: 8.640 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 450 mm, skupna dolžina: 6.950 mm, vzmetenje: drugo, barva: bela, vrsta goriva: bencin, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, - Fliegl tristranski nakladalni prikolica tipa TSK 118, novo vozilo, dobavni rok na zahtevo. - Aluminijaste rampe, opcija, 1800 EUR neto. - Cena z rampami: 22.700 EUR plus DDV. - Tovarniško novo. - Okvir vroče pocinkan. - Dovoljena skupna masa: 11.800 kg. - Prazna masa: 3160 kg. - Nosilnost: 8640 kg. - Skupna dolžina: 6950 mm. - Skupna širina: 2550 mm. - Dimenzije tovornega prostora: D 5000 mm, Š 2420 mm, višina nakladanja: 950 mm. - Jeklena, varjena konstrukcija. - Podporno stopalo spredaj. - Zložljiva zadnja opora (aluminijaste rampe, opcija, 1800 EUR neto). - Zaščita pred podvozom, jeklena. - Zaščitne blazine zadaj, neprekinjene. - Zaključljiv prostor za shranjevanje ramp za nakladanje pod tovorno površino. - Vlečna oja, 40 mm. - Vlečna prikolica, nastavljiva po višini. - Osnova BPW. - "Podvozje, natančno izmerjeno z laserjem", za zmanjšanje obrabe pnevmatik in porabe goriva. - Parabolična vzmetenje z vzdrževalno brezplačnimi jekleno-gumijastimi ležaji in mehansko porazdelitvijo obremenitve osi. - 235/75R17,5. - Zavorna sistema na stisnjen zrak z dvema vodoma, ročna zavora z ročico. - ABS in ALB. - Stabilna kipna plošča s 4 mm jekleno ploščo na dnu. - Stranske stene se zložijo in nihajo s centralnim zaklepom. - Kotni nosilci zadaj, vstavljivi. - Zadnja stena se zloži in je nameščena s centralnim zaklepom. - 5 parov pritrdilnih točk v dnu, vsaka 5 ton. - Obrobe označene z odsevnim trakom. - Okvir vroče pocinkan, 15 let garancije proti predrastitvi. - Barva okvirja in plošče: RAL 9010, čista bela. - Napaka in medvmesna prodaja pridržani! - Več informacij, dodatne slike XXL, navodila za pot, najdete na naši spletni strani: ... DDV je mogoče prikazati, ABS, novo vozilo, zelo dobro stanje, HSN 7951, TSN 000, poraba: 0,0/0,0/0,0 l/100 km (kombinirano/mestno/zunajmestno). Nsdpszv Nrlefx Actswk