Prikolica z nizko platformoFLIEGL
DTL 300 3-Achs Tieflader Agrar Greenl. Hydraulik
Prikolica z nizko platformo
FLIEGL
DTL 300 3-Achs Tieflader Agrar Greenl. Hydraulik
Stalna cena brez DDV
27.900 €
(33.201 € bruto)
Stanje
Novo
Lokacija
Wiesmoor 

Prikaži slike
Prikaži karto
Osnovni podatki
Cena in lokacija
Stalna cena brez DDV
27.900 €
(33.201 € bruto)
- Lokacija prodajalca:
- Ilexstr. 41, 26639 Wiesmoor, Nemčija

Klic
Tehnične podrobnosti
- Največja dovoljena obremenitev:
- 18.400 kg
- Skupna masa:
- 24.000 kg
- Konfiguracija osi:
- 3 osi
- Dolžina tovornega prostora:
- 5.900 mm
- Širina tovornega prostora:
- 2.500 mm
- Višina nakladalnega prostora:
- 860 mm
- Skupna širina:
- 2.520 mm
Podrobnosti ponudbe
- ID ponudbe:
- A213-49-842
- Št. reference:
- NEU-N8
- Nazadnje posodobljeno:
- dne 01.03.2026
Opis
Total weight: 24,000kg / 30,000kg
Unladen weight: 5,600kg
Payload: 18,400 / 24,400kg
Overall length: 10,290mm
Loading length: 5,900mm incl. rear bevel
Width: 2,520mm
Loading height: 860mm
Further information:
plus pre-carriage / provision ex storage location 26639 Wiesmoor: €1,280.00 / net
Chassis Low-bed trailer
Steel welded construction
Turntable with robust ball bearing ring
Rear support, foldable
2 wheel chocks with holders
Rear splash guards full width (not in combination with forklift holder)
1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable
Prepared for widening to 3,000 mm (holes in outer frame with covers, not in the rear bevel)
Tie-down points low loader
1 pair of lashing cutouts recessed in front longitudinal member on cranked section, each rated 10 t
7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each 10 t
1 x at the front on the cranked section
5 x in the low-bed
1 x in the rear bevel
12 pairs of lashing holes in the outer frame, each rated 5 t (for lashing strap hooks)
5 x cranked section, 6 x low-bed and 1 x rear bevel
Drawbar equipment Turntable trailer
Drawbar with certified 40 mm towing eye
Drawbar height adjustment by spring
Axles + Suspension
Drum brake axles by manufacturer’s choice
"Axles / chassis laser aligned" reduces tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker balancing)
Wheels and Tires
235 / 75 R 17.5"
by manufacturer’s choice
Steel twin rims, factory silver
Braking system
2-line air brake system
Spring-loaded parking brake
2 non-interchangeable coupling heads at front, with extension lines to engine vehicle, extension approx. 60 cm
Without ABS, but with mechanical ALB, thus max. 60 km/h permitted
Electrics
12 volts, multi-chamber lights, without lateral yellow LED lighting, side reflectors
2 white position lights front
2 white/red lane marker lights rear
1 x 7-pin 12V plug front, with extension cable approx. 60 cm
1 LED beacon with bracket, switched via sidelights (removable light)
2 pairs warning plates illuminated, extendable to 3,000 mm
Floor
Cranked section front with steel/chequer plate covering
Stow box recessed in transition bevel to cranked section
then approx. 70 mm softwood floor, in wheel arch area steel/chequer plate
Rear bevel with 70 mm softwood floor
Low-bed loading area incl. rear bevel 5900 mm
Ramps
Steel ramps approx. 3000 mm long, 750 mm wide, side-shiftable
with timber covering (front area with steel/chequer plate)
Hydraulic via tractor auxiliary drive with restrictor, operation side FR left
Hydraulic connection with SVK plug NW 10/3 incl. connector hose
Operating notes
At 10,000kg axle load, an exemption permit is required, only indivisible loads permitted!
The indicated total weight is technically possible; depending on the cargo, the permissible axle, support, and kingpin loads may not be reached (poor handling and tracking possible if load distribution is incorrect)
Country of registration / plates
Country of registration: Germany
With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle agricultural/forestry,
(country of registration Switzerland max. 40 km/h possible)
prepared for double-line license plate holder
without outline marking / reflective strips according to ECE R 048,
Hedpfxoynvrwe Af Asi
Paintwork
Frame hot-dip galvanized incl. passivation
"15 year warranty against penetra—"
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Unladen weight: 5,600kg
Payload: 18,400 / 24,400kg
Overall length: 10,290mm
Loading length: 5,900mm incl. rear bevel
Width: 2,520mm
Loading height: 860mm
Further information:
plus pre-carriage / provision ex storage location 26639 Wiesmoor: €1,280.00 / net
Chassis Low-bed trailer
Steel welded construction
Turntable with robust ball bearing ring
Rear support, foldable
2 wheel chocks with holders
Rear splash guards full width (not in combination with forklift holder)
1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable
Prepared for widening to 3,000 mm (holes in outer frame with covers, not in the rear bevel)
Tie-down points low loader
1 pair of lashing cutouts recessed in front longitudinal member on cranked section, each rated 10 t
7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each 10 t
1 x at the front on the cranked section
5 x in the low-bed
1 x in the rear bevel
12 pairs of lashing holes in the outer frame, each rated 5 t (for lashing strap hooks)
5 x cranked section, 6 x low-bed and 1 x rear bevel
Drawbar equipment Turntable trailer
Drawbar with certified 40 mm towing eye
Drawbar height adjustment by spring
Axles + Suspension
Drum brake axles by manufacturer’s choice
"Axles / chassis laser aligned" reduces tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker balancing)
Wheels and Tires
235 / 75 R 17.5"
by manufacturer’s choice
Steel twin rims, factory silver
Braking system
2-line air brake system
Spring-loaded parking brake
2 non-interchangeable coupling heads at front, with extension lines to engine vehicle, extension approx. 60 cm
Without ABS, but with mechanical ALB, thus max. 60 km/h permitted
Electrics
12 volts, multi-chamber lights, without lateral yellow LED lighting, side reflectors
2 white position lights front
2 white/red lane marker lights rear
1 x 7-pin 12V plug front, with extension cable approx. 60 cm
1 LED beacon with bracket, switched via sidelights (removable light)
2 pairs warning plates illuminated, extendable to 3,000 mm
Floor
Cranked section front with steel/chequer plate covering
Stow box recessed in transition bevel to cranked section
then approx. 70 mm softwood floor, in wheel arch area steel/chequer plate
Rear bevel with 70 mm softwood floor
Low-bed loading area incl. rear bevel 5900 mm
Ramps
Steel ramps approx. 3000 mm long, 750 mm wide, side-shiftable
with timber covering (front area with steel/chequer plate)
Hydraulic via tractor auxiliary drive with restrictor, operation side FR left
Hydraulic connection with SVK plug NW 10/3 incl. connector hose
Operating notes
At 10,000kg axle load, an exemption permit is required, only indivisible loads permitted!
The indicated total weight is technically possible; depending on the cargo, the permissible axle, support, and kingpin loads may not be reached (poor handling and tracking possible if load distribution is incorrect)
Country of registration / plates
Country of registration: Germany
With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle agricultural/forestry,
(country of registration Switzerland max. 40 km/h possible)
prepared for double-line license plate holder
without outline marking / reflective strips according to ECE R 048,
Hedpfxoynvrwe Af Asi
Paintwork
Frame hot-dip galvanized incl. passivation
"15 year warranty against penetra—"
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2023
Pošlji zahtevo
Telefon & Faks
+49 4944 ... oglasi
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake


















