Faymonville Spz-3A Plattform, Ausziehbar Auf 21M, Gelenkt nakup rabljenega (4.727)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
ANDELST
932 km
Nizki nakladalnik
FaymonvilleMax Trailer 3-assige dieplader Extendable
Pokliči
Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.500 kg, dovoljena osna obremenitev (os 2): 10.500 kg, dovoljena osna obremenitev (os 3): 10.500 kg, prva registracija: 11/2022, skupna dolžina: 13.900 mm, skupna širina: 2.550 mm, skupna višina: 2.400 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 17.5, medosna razdalja: 2.300 mm, Leto izdelave: 2022, Oprema: ABS, = Additional Options and Equipment =
- EBS (Electronic Braking System)
- Rear air suspension
- Spare wheel
= Notes =
- Faymonville / Max Trailer 3-axle low loader (Type: MAX100)
- Loading platform dimensions: length 930 cm x width 254 cm
- Extendable up to: 1280 cm (+350 cm)
- Loading height: 91 cm
- Lashing rings
- Wheel recess
- Widening inserts
- Gooseneck dimensions: length 252 cm x width 247 cm x height 40 cm
- Loading height: 149 cm
- 2 ALTEC aluminium loading ramps (Type: VFR120)
- Dimensions: length 235 cm x width 47 cm
- Maximum incline: 30% (16.5°)
- 10.5-ton axles!
- 18-tonne fifth wheel pressure!
- 49.5 tonnes gross vehicle weight! (Technical)
- LIKE NEW CONDITION!
- Always stored indoors!
- Only 20,000 km driven!
= Further Information =
Axle configuration
Tyre size: 235/75 17.5
Axle brand: BPW
Suspension: air suspension
Rear axle 1: twin tyres; max. axle load: 10,500 kg; tyre tread left inner: 70%; tyre tread left outer: 70%; tyre tread right inner: 70%; tyre tread right outer: 70%
Rear axle 2: twin tyres; max. axle load: 10,500 kg; tyre tread left outer: 80%; tyre tread right outer: 80%
Rear axle 3: twin tyres; max. axle load: 10,500 kg; steered; tyre tread left inner: 70%; tyre tread left outer: 70%; tyre tread right inner: 70%; tyre tread right outer: 70%
Weights
Unladen weight: 10,069 kg
Payload: 35,931 kg
gross vehicle weight: 46,000 kg
Maintenance, history and condition
Number of owners: 1
APK (MOT equivalent): valid until 11.2026
Technical condition: good
Visual condition: good
Podpfjyztt Tex Aapsgk
Identification
Registration number: OT-87-PP
Product Safety
Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim ležiščem za prevoz gradbenih strojev
FaymonvilleMAX Trailer 3-A-Tele-Semi-Radmul.-Rampen
Pokliči
Stanje: rabljeno, lastna masa: 11.200 kg, največja dovoljena obremenitev: 36.800 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you receive a current & comprehensive inspection and function report.
Gooseneck:
- Gooseneck with rear bevel of approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood floor
Pgjdpeyyldujfx Aapek
Extendable loading area:
- Telescopic loading area with rear incline approx. 1,000 mm x 8°
- 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm
- Wheel recesses with 15 x 15 mm square climbing strips and widened sections in the lower area
- Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm
- Incl. 3-piece removable galvanized covers over the wheel recesses (width 670 mm) – max. point load 5 t / pc
- Recess in the incline and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm
- 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN)
- 5 pairs of swing-out lashing rings (LC 5,000 daN)
- 2 pairs of swing-out lashing rings (LC 10,000 daN)
- 2 pairs of lashing rings in the excavator dipper recess (LC 5,000 daN)
- Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN)
Ramps:
- One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering
- Ramps with hydraulically folding ramp sections, hydraulic lifting unit, and hydraulically adjustable
- Maximum load per pair: 40,000 kg
Axles and tires:
- BPW axles and suspension, 2 rigid axles, 1 trailing self-steer axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock operable via reverse gear and manual activation
- Air suspension with raise and lower valve
- Axle tools
- TPMS tire pressure monitoring system compliant with ECE R 141
- Tires: 235/75 R17.5 3PMSF
Accessories included:
- Bracket for warning signs on the gooseneck and at the rear, left and right, each with socket
- One spare wheel with holder in front of the bulkhead
- 2" kingpin
- Galvanized steel front wall approx. 400 mm high
- Yellow-red air couplings at the front galvanized connection rail
- 4 wheel chocks with holders
- Galvanized, extendable width extensions approx. 230 mm per side
- Galvanized folding supports under the incline of the loading area
- Cover plates to bridge the gap between ramps and loading area
- White reflective tape on sides and on extendable section, rear in red, according to EU regulations
- Electro-hydraulic unit at the rear, under the loading area
- European reflector boards (red-yellow) on the rear of the semi-trailer
- Four extendable warning signs, each approx. 423 x 423 mm with position lamp (extend approx. 400 mm)
- Bracket for rotating beacon on the warning signs
- On the gooseneck, plug-in aluminium side and rear boards approx. 2,440 x 400 mm
- Rear, galvanized plug-in stanchions removable (body length approx. 2,560 mm)
- 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container
- 3 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area
- Removable, galvanized intermediate table with 1 pair of WADER container pockets
- 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area incline
- Painted sand layer as anti-slip protection on chequer plates on the gooseneck and loading area
- Speed sticker 80 km/h on rear and both sides
- Load manometer for determining axle loads, including load chart
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim ležiščem za prevoz gradbenih strojev
Faymonville4-1+3-A-Semi-Twinaxle II-Rampen-MultiMAX
Pokliči
Stanje: novo, skupna masa: 78.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck:
• Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long, rear with a bevel approx. 1,000 mm x 10°
• For tractor units: 4 x 2, 6 x 2 and 6 x 4
Loading Area:
• Extendable loading platform, approx. 8,800 mm long with rear bevel approx. 500 mm x 10°
• A recess in the platform and rear bevel to accommodate the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm
Ramps:
• One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide
• Hydraulically folding ramp tips
• Ramps hydraulically adjustable separately approx. 235 mm outwards and approx. 215 mm inwards
• Hardwood decking on the beveled part of the loading area
• Ramp with hardwood decking
• 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the ramp
Axles and Tyres:
• TWINAXLE-II independent wheel suspension with BPW stub axles, 1st axle steered in advance, all other axles are hydromechanically forced steered
• 1st axle with electromagnetic reverse lock via reverse gear and manual activation
• Technical axle load: 12,000 kg
• Hydr. axle compensation, hydraulic cylinders with shut-off valves
• Tyres 245/70 R 17.5
• TPMS tyre pressure monitoring system according to ECE R 141
Accessories Included:
• Plug-in steel front wall, approx. 400 mm high
• 4 wheel chocks with holder
Pgodpfx Aajrvw U Sspjk
• Front connection bar with yellow-red air couplings
• 3 kW electro-hydraulic power pack for hydraulic control, except for hydraulic winches
• 1 spare wheel
• 2 pairs of screw-in lashing rings
• 1 pair of horizontal lashing rings in the rear area of the gooseneck
• On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized
• On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized
• Approx. 40 mm thick hardwood decking on the gooseneck, checker plate over the king pin
• 3.5" king pin
• Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide
• Load area locking with conically welded arresting profiles every 250 mm
• Incl. pre-tensioning plate
• 1 pair of lashing rings on the front cross member
• 8 pairs of recessed, fold-out lashing rings in the outer frame of the platform
• Extendable (galvanized) widenings approx. 230 mm per side
• 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm, in the platform in front of the 1st axle
• Wheel recesses with checker plate covering and 15 x 15 mm square climbing strips, approx. every 200 mm
• 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the platform between the 1st and 2nd axle
• Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower section
• ALU covers for the wheel recesses between 1st and 2nd axle, which can also be used as broadening planks
• 1 pair of mechanical rear supports
• 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the bevel of the loading area
• Central lubrication system with 1 pump, BEKAMAX brand, standard grease as per NLGI-2
• Radio and cable remote control, with 2 indicator lights on the receiver for single wheel control
• WABCO Smart Board system
• The Smart Board is equipped with an odometer
• 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mounts for rotating beacon


Prodaja več kot 4 milijonom zainteresiranih na mesec
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim ležiščem za prevoz gradbenih strojev
Faymonville3-A-Semi-Ladebo.-abklappba.-Heck-Hilfsle
Pokliči
Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing loading area length, approx. 3,700 mm long, with rear tapering of approx. 1,000 mm x 6°
- For tractor units: 4 x 2 and 6 x 2
Loading platform:
- Loading platform, approx. 9,700 mm long, with hydraulically foldable and lowerable rear section as well as hydraulically liftable front section for driving onto the gooseneck
Axles and tyres:
- BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle self-steering
- 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually
- Technical axle load: 12,000 kg
- Air suspension with lift/lower valve
- 235/75 R 17.5 3PMSF twin tyres
Pgodpfx Aaoyw Sakopok
- TPMS tyre pressure monitoring system according to ECE R 141
BPW Auto Reverse Control:
- Electrohydraulic auxiliary steering for the self-steering axle of a 3-axle unit
- Automatic control of the self-steering axle when reversing via gyroscope sensor
- Manual steering operation in forward and reverse using separate radio remote control
- Manual operation enabled up to 10 km/h
- System powered by separate electro-hydraulic unit
Accessories included:
- Removable steel front wall, approx. 400 mm high
- 3 kW electro-hydraulic power pack
- External beams on gooseneck with mounting holes for bolted lashing rings
- First mounting hole approx. 200 mm from front, then approx. every 400 mm
- One mounting hole at upper rear of external gooseneck beams for a bolted lashing ring
- Grating cover with 5 mm sheet reinforcement on gooseneck and rear taper
- 2" king pin
- Guide plate on gooseneck for fifth wheel plate, approx. 500 mm wide
- Round NATO socket at front connection bar (Maeler & Kaege VG 96 917)
- 1 pair of removable side aluminium drop sides on gooseneck, approx. 400 mm high, anodized
- 4 wheel chocks
- Electric winch, approx. 5,400 kg pulling force, with radio remote control
- Wire cable approx. 24 m long, cable ø approx. 9.5 mm, including cable pressure roller
- Winch installed at the front inside the gooseneck
- Continuous grating cover with 5 mm steel underlay for additional reinforcement, designed for point loads:
- on the lift bed
- on the loading platform
- on the hydraulically lowerable rear section
- Painted-on sand coating on the gooseneck covering plates and in transition areas between neck and lift bed, between lift bed and loading platform, and between loading platform and ramps
- 1 spare wheel
- Hydraulic lift bed, approx. 2,500 mm long, load capacity while driving in raised position: 9,000 kg
- Hydraulic cylinders are fitted with load-holding valves
- Cut-outs in the outer frame of the loading platform and lift bed for attaching tension straps
- Extensive lashing positions
- Hydraulically lowerable rear section for loading and unloading, can be raised to shorten total coupling length
- Load capacity while driving in horizontal position: 10,000 kg
- Shortening of total coupling length when raised: 2,350 mm
- Painted-on sand coating on the complete ramp, except for the extendable galvanized part of the ramp
- Hydraulically extendable rear extensions for loading and unloading
- Radio remote control:
- Control of hydraulic lift bed
- Control of hydraulic lifting of rear extension
- Control of hydraulic extension of rear extension
- 1st axle with starting aid
- Centralized lubrication system with 1 pump
- 4 warning signs, approx. 423 x 423 mm, extendable
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim ležiščem za prevoz gradbenih strojev
Faymonville3-A-Semi-hydr. Ladebo.-abklappbarem Heck
Pokliči
Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck:
- Gooseneck in SNT design for optimal load deck length, length approx. 3,700 mm, rear end with chamfer approx. 1,000 mm x 6°
- For tractor units: 4 x 2 and 6 x 2
Load deck:
- Load deck, approx. 9,700 mm long with hydraulically folding and lowering rear section, as well as hydraulically liftable deck at the front for driving over the gooseneck
Axles and Tyres:
- BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle steering on trailing arm
- 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manual switch
- Technical axle load: 12,000 kg
Pgsdjyw R Srjpfx Aapek
- Air suspension with lifting and lowering valve
- 235/75 R 17.5 3PMSF twin tyres
- TPMS tyre pressure monitoring system compliant with ECE R 141
Included accessories:
- Plug-in steel front wall approx. 400 mm high
- Yellow-red air couplings on the front connection rail
- 3 kW electro-hydraulic power pack for control of hydraulic functions, except hydraulic winches
- Outer beams on the gooseneck with fixing holes for screwable lashing rings
- First hole approx. 200 mm from front, then approx. every 400 mm
- 2 pairs of screw-in lashing rings included
- One mounting hole on the upper rear area of the outer beams of the gooseneck for a screwable lashing ring
- On gooseneck and rear chamfer, grating covering with 5 mm plate reinforcement
- 2" kingpin
- Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide
- Round NATO socket on the front connection rail (Maeler & Kaege VG 96 917)
- On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodised
- 4 wheel chocks
- Electric cable winch, approx. 5,400 kg pulling force, with remote control
- Wire rope approx. 24 m long, rope diameter approx. 9.5 mm, incl. rope pressure roller
- Winch mounted at the front inside of the gooseneck
- Plastic tarpaulin cover for the winch
- Mechanical landing gear with 2-speed gearbox and crank
- JOST Modul B – static test load = 50,000 kg
- Continuous grating covering with 5 mm plate reinforcement for additional strength, designed for point loads:
- on the lifting bed
- on the load deck
- on the hydraulically lowerable rear section
- Painted-on sand coating on the gooseneck covers and transitional areas between neck and lift bed, between lift bed and load deck, and between load deck and ramps
- 1 spare wheel with mounting adapter under the load deck on the right in front of the axles
- Hydraulic lifting bed, length approx. 2,500 mm, load capacity in driving position (raised): 9,000 kg
- Hydraulic cylinders fitted with load-holding valves
- Cut-outs in the outer frame of the load deck and lifting bed for lashing straps
- Extensive lashing positions
- Hydraulically lowerable rear section for loading/unloading and can be raised to reduce overall train length
- Load capacity in driving position (horizontal): 10,000 kg
- Reduction of overall train length when raised: 2,350 mm
- Painted-on sand coating on the entire ramp, except for the extendable galvanised ramp section
- Hydraulic, extendable rear extensions for loading and unloading
- Remote control:
- Lifting bed operation
- Lifting device for rear extension operation
- Extension of rear extension operation
- 1st axle with traction aid
- Central lubrication system with 1 pump
- 4 warning boards, approx. 423 x 423 mm, extendable
Mali oglas
Dortmund
815 km
Polpriklopnik z nizko nakladalno ploščadjo
Faymonville5-Achs-Doppeltele-Semi-zwangsgelenkt
Pokliči
Stanje: rabljeno, lastna masa: 16.500 kg, največja dovoljena obremenitev: 67.500 kg, skupna masa: 84.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2025, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 925 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you receive a current and comprehensive inspection and function report.
Gooseneck:
- Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with bevel approx. 1,000 mm x 10°
- For tractor units: 6x2, 6x4, and short 8x4
Extendable loading platform:
- Loading platform, double-extendable, approx. 8,800 mm long with rear bevel approx. 500 mm x 10°
- A support table approx. 300 mm wide with elongated slots for hook-in and adjustable bridging elements is welded to the central beam, both front and rear
Hydraulic loading ramps:
- Removable hanging rail with bracket for mounting EU reflectors, warning signs, and speed stickers
- Hardwood covering on the loading deck's sloped area
- Control valves for the hydraulic ramps located on the right side of the vehicle
Axles and tires:
- BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered
- 1st axle equipped with electro-magnetic reverse lock, activatable via reverse gear and manually
- Technical axle load: 12,000 kg
- Air suspension with lift and lower valve
- 235/75 R 17.5 3PMSF
- TPMS tire pressure monitoring system in accordance with ECE R 141
- TPMS tire pressure sensors fitted in all wheels, including spare wheels
Accessories included:
Pgjdpfeyvrvcsx Aapsk
- Plug-in steel front wall, approx. 400 mm high
- Yellow-red air couplings at the connector panel
- 3 kW electro-hydraulic unit for controlling hydraulic functions (excluding hydraulic winches)
- 1 spare wheel
- Outer beam of gooseneck with mounting holes for bolted lashing rings
- First hole approx. 200 mm from the front, then every approx. 400 mm
- 2 pairs of screw-in lashing rings included (LC 5,000 daN)
- 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN)
- On the gooseneck, 1 pair of plug-in side ALU drop sides, approx. 400 mm high, anodised
- On the gooseneck, one plug-in ALU rear wall, approx. 400 mm high, anodised
- Approx. 40 mm thick hardwood flooring over the gooseneck
- 3.5" kingpin
- Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide
- Round NATO socket at the front connector panel
- One-piece INOX toolbox approx. 2,480 x 340 x 390 mm
- Mechanical landing gear with 2-speed gearbox and crank
- JOST Modul B - static test load = 50,000 kg
- Continuous hardwood flooring (approx. 50 mm thick) on the loading platform and interrupted between the axles
- Loading platform locking with conically welded locking profiles, every 500 mm over the first 3,000 mm of extension on the large cross-section extension tube; thereafter, every 1,000 mm
- On the small cross-section extension tube, one locking point approx. every 3,000 mm and at full extension
- Elongated slots for hook-in and movable bridging elements at the front of the loading deck
- 1 pair of lashing rings on the front cross beam (LC 10,000 daN)
- 7 pairs of retractable lashing rings in the outer frame of the loading platform, foldable outward (LC 10,000 daN)
- Extendable widenings of approx. 230 mm per side
- 1 pair of mechanical rear supports
- Central lubrication system, 2-pump, brand BEKAMAX
- Radio and cable remote control
- 2 axle load gauges installed on the left side, including axle load diagram
- 1st axle with automatic lift axle function
- 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm
Mali oglas
Essen
835 km
Priklopnik sedeža z delovno ploščadjo
FAYMONVILLEMAX Trailer MAX410 Ballastauflieger
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 44.420 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 11.500 mm, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of immediately and soon available vehicles on our website.
Excerpt from the equipment. Complete equipment details on request.
Loading platform:
* Loading bed with approx. 30 mm thick hardwood floor
* 9 pairs of folding lashing rings towards the outside (LC 10,000 daN)
* 10 pairs of stake pockets in the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm
Landing gear / Support legs:
* Hydraulic landing gear
Tyres:
* Tyres 385/65 R 22.5 - MICHELIN MULTI High Load 164K
TPMS:
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is carried out via the standardised EBS interface according to ISO 11992. For correct display, the truck must be capable of transmitting and displaying this data.
Axles and suspension:
* BPW axles, technical capacity 10,000 kg each, first axle hydro-mechanically steered, second axle fixed, and third axle hydro-mechanically forced-steered, mounted on turntable
* Air suspension with raise/lower valve
Brake system:
* WABCO brake system according to EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit
Electrical system:
* Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin connectors according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098
Steel construction:
* Steel construction made of high-strength fine-grain steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Coating:
* Entire steel construction shot-blasted automatically after welding using a turbine blast machine
* Second blasting treatment with corundum for optimal adhesion of the coating system
* HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection
* Final coating with 2 layers of 2K topcoat, single color in RAL 9005 Jet Black as per RAL System 841GL
* Rear section metallised and painted in RAL 9010 (Pure White)
* Rims in silver grey
* Coating tested by salt spray test according to ISO 9227-NSS
* Cavities sealed with special wax
Included accessories:
* Loading platform with approx. 30 mm thick hardwood floor
* 2-inch king pin
* One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high
* DUOMATIK air couplings at the galvanized connection rail at the front
* Storage for approx. 1,000 mm plug-in stakes, rear in the central beam
* On the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket
* White reflective tape in accordance with EU regulations on the sides and red at the rear
* 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading platform
* European reflective plates (red-yellow) at the rear of the trailer
* One holder for a rotating beacon at the rear of the trailer
* One mud flap at the rear of the trailer
* Manual and description on USB stick
* BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable pump cover
Pgodpoyu Eu Ijfx Aapjk
* 4 wheel chocks with holder on the front wall
* Steering from the front and rear via cable remote control with push buttons, with axle tracking control (without installation in the tractor unit)
* Electro-hydraulic unit
* 6 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high
* 5 pairs of crosswise stake pocket bars mounted in the loading plat
Mali oglas
Gilze
949 km
Nizki nakladalnik
FaymonvilleSTBZ-5VA + 3 AXLE JEEP DOLLY / EXTENDABLE / REM...
Pokliči
Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 10/2006, skupna širina: 2.850 mm, vzmetenje: drugo, velikost pnevmatike: 285/70R19.5, barva: črn, Leto izdelave: 2006, Oprema: ABS, = Additional Options and Equipment =
- Central lubrication
= Remarks =
Faymonville Jeep Dolly D3
Year: 10-2006.
1 x lift axle.
1 x friction-steered axle (trailing steering axle).
Air suspension.
Maximum technical weight: 56,000 kg.
Faymonville STBZ-5VA
Year: 10-2006.
Pendulum axles.
Removable gooseneck.
Movable platform.
Extendable load bed: 400 cm.
Load bed dimensions: 650 + 400 cm.
Gooseneck load capacity: 50,000 kg.
Maximum technical weight: 119,680 kg.
= Further Information =
Axle Configuration
Tyre size: 285/70R19.5
Brakes: Drum brakes
Front Axle 1: Twin tires; Left inside tread: 15%; Left outside: 60%; Right inside: 60%; Right outside: 60%; Suspension: Air suspension
Front Axle 2: Twin tires; Left inside tread: 30%; Left outside: 30%; Right inside: 40%; Right outside: 60%; Suspension: Air suspension
Front Axle 3: Twin tires; Steered; Left inside tread: 30%; Left outside: 70%; Right inside: 60%; Right outside: 70%; Suspension: Air suspension
Rear Axle 1: Twin tires; Steered; Left inside tread: 30%; Left outside: 60%; Right inside: 40%; Right outside: 70%; Suspension: Hydraulic suspension
Rear Axle 2: Twin tires; Steered; Left inside tread: 50%; Left outside: 50%; Right inside: 30%; Right outside: 75%; Suspension: Hydraulic suspension
Rear Axle 3: Twin tires; Steered; Left inside tread: 60%; Left outside: 60%; Right inside: 60%; Right outside: 60%; Suspension: Hydraulic suspension
Rear Axle 4: Twin tires; Steered; Left inside tread: 60%; Left outside: 60%; Right inside: 40%; Right outside: 50%; Suspension: Hydraulic suspension
Rear Axle 5: Twin tires; Steered; Left inside tread: 70%; Left outside: 70%; Right inside: 20%; Right outside: 70%; Suspension: Hydraulic suspension
Weights
Psdpfx Ajxbng Eeapegk
Unladen weight: 36,600 kg
Payload: 83,080 kg
Gross vehicle weight: 119,680 kg
Financial Information
Price: On request
Identification
Model number: STBZ-5VA + 3 AXLE JEEP DOLLY / E
= Company Information =
ALL PRICES ARE NET EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We strive to provide accurate information; however, no rights can be derived from the listed texts.
Mali oglas
Bernkastel-Kues
726 km
Hladilna polprikolica
ACKERMANN-FRUEHAUF2-Achs*11,8m*gelenkt*LBW*Frigoblock*Liftachse
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 19.880 kg, skupna masa: 29.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2013, dolžina tovornega prostora: 11.700 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.250 mm, prostornina tovornega prostora: 66 m³, skupna širina: 2.660 mm, skupna višina: 3.760 mm, Leto izdelave: 2013, Oprema: ABS, * Tridec krmiljenje
Pgodpjxafqrsfx Aapek
* Dvižna os
* Osi Mercedes Benz
* Popolnoma zračno vzmetenje
* Kolutne zavore
* Hladilna enota Frigoblock
* Zadnja dvižna ploščad Dautel 2.000 kg
* Pnevmatske gume 385/65 R 22.5 60-80 %
Mali oglas
Bernkastel-Kues
726 km
Furgonska polprikolica
ACKERMANN-FRUEHAUF2-Achs*11,8m*gelenkt*LBW*Frigoblock*Liftachse
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 19.880 kg, skupna masa: 29.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2013, dolžina tovornega prostora: 11.700 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.250 mm, prostornina tovornega prostora: 66 m³, skupna širina: 2.660 mm, skupna višina: 3.760 mm, Leto izdelave: 2013, Oprema: ABS, * Tridec krmiljenje
* Dvižna os
Pgsdpow Szulofx Aapok
* Osi Mercedes Benz
* Popolnoma zračno vzmetenje
* Kolutne zavore
* Hladilna enota Frigoblock
* Zadnja dvižna ploščad Dautel 2.000 kg
* Pnevmatske gume 385/65 R 22.5 60-80 %
Mali oglas
Dortmund
815 km
Polpriklopnik z nizko nakladalno ploščadjo
Faymonville4-1+3-Achs-Tele-Semi-Radmulden-Rampen
Pokliči
Stanje: rabljeno, lastna masa: 14.350 kg, največja dovoljena obremenitev: 48.650 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report.
Gooseneck:
- SNT design gooseneck for optimized loading platform length, length approx. 3,700 mm
- Gooseneck rear with approx. 1,000 mm x 10° bevel
Loading Platform:
- Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10°
- Recessed area in platform and bevel for accommodating the excavator’s dipper stick
Ramps:
- 1 pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide
- Ramps with hardwood decking
- Hydraulically folding ramp tips
- Ramps hydraulically adjustable individually, approx. 235 mm outward and 215 mm inward
- Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the ramp outer frame
Axles and Suspension:
- BPW axles and suspension, first axle steering assist, all other axles forced steered hydromechanical
- Technical axle load: 12,000 kg
- 1st axle with electromagnetic reverse-lock, activated via reverse gear or manually
- Air suspension with lift/lower valve
- 235/75 R 17.5 tires
- TPMS tire monitoring system
Pgodpfxjyrfn Ns Aapok
Included Accessories:
- Detachable steel front wall, approx. 400 mm high
- 3kW electro-hydraulic power pack for hydraulic controls (except hydraulic winches)
- Park position for warning signs on gooseneck when not in use
- 1 spare wheel
- Gooseneck outer beams with fixing holes for bolted lashing rings
- First borehole approx. 200 mm from the front, then every 400 mm
- 2 pairs of screw-in lashing rings included
- 1 pair of recessed lashing rings at the rear of the gooseneck
- Gooseneck with 1 pair of plug-in anodized ALU sideboards, approx. 400 mm high
- Gooseneck with plug-in anodized ALU rear board, approx. 400 mm high
- Gooseneck deck with 40 mm thick hardwood, with checker plate above king pin
- 2" king pin
- Guide plate on gooseneck for fifth wheel, approx. 500 mm wide
- Round NATO socket on the front connector strip
- 4 wheel chocks
- Mechanical landing legs with 2-speed gearbox and crank
- Loading platform with continuous and between-axle interrupted approx. 50 mm thick hardwood deck
- Platform locking with conically welded locking profiles every 250 mm
- Including pre-tensioning plate
- 1 intermediate table, approx. 300 mm wide, for extension tube with large cross-section; intermediate table has offset loading surface and extendable hanging rails for aluminum bridging elements
- 1 pair of lashing rings on the front cross member
- 8 pairs of recessed lashing rings in outer frame of platform, can be folded outwards
- Galvanized extensions extendable by approx. 230 mm per side
- Wheel wells with square climbing bars, 15 x 15 mm, open continuously in front of the axles to the gooseneck cross member, approx. 700 x 410 mm
- ALU covers for wheel wells, also usable as bridging elements for extension or as widening planks
- Aluminum elements lockable onto extension tubes of the widenings
- Extendable U-profiles for ALU covers
- Wheel wells with square climbing bars, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm
- 1st axle with automatic lift axle function
- 4 warning signs, approx. 423 x 423 mm
- Radio and cable remote control
Mali oglas
Dortmund
815 km
Polpriklopnik z nizko nakladalno ploščadjo
Faymonville4-1+3-Achs-Tele-Semi-Radmulden-Rampen-zg
Pokliči
Stanje: rabljeno, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2024, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, Leto izdelave: 2024, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functional report.
Gooseneck:
- Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long
- Gooseneck rear with chamfer, approx. 1,000 mm x 10°
Loading platform:
- Extendable loading platform, approx. 8,800 mm long, with chamfer at the rear approx. 500 mm x 10°
- A recess in the loading platform and into the chamfer to accommodate the excavator's dipper stick
- Pneumatic locking with conical locking bolts and reinforced locking positions
- Hardwood surface on the chamfer of the loading platform
Ramps:
- 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide
- Ramps with hardwood inlay
- Hydraulically foldable ramp tips
- Ramps can be hydraulically shifted approx. 235 mm outwards and 215 mm inwards individually
- Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp
Axles and Suspension:
- BPW axles and suspension, 1st axle with forced steering, all other axles hydro-mechanically forced steered
- Technical axle load: 12,000 kg
- Air suspension
- Tyres 235/75 R 17.5
- TPMS tyre monitoring system
- TPMS tyre pressure sensors
Included Accessories:
- Plug-in steel front wall, approx. 400 mm high
- 3kW electro-hydraulic unit for hydraulic operations
- 1 spare wheel
- Outer beams on the gooseneck with fixing holes for bolted lashing rings
- First hole approx. 200 mm from the front, then approx. every 400 mm
- 2 pairs of screw-in lashing rings included
- 1 pair of horizontal lashing rings at the rear of the gooseneck
- On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized
- On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized
- 2" kingpin
- Round NATO socket at the front connection bar
- 4 wheel chocks
- Mechanical landing gear with 2-speed gearbox and crank
- 1 intermediate table, approx. 300 mm wide
- 1 pair of lashing rings on the front crossmember
- 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards
- Extendable galvanized outriggers, approx. 230 mm per side
- Wheel recesses with square climbing strips, 15 x 15 mm, open continuously in front of the axles up to the gooseneck crossmember, approx. 700 x 410 mm
- ALU covers for the wheel recesses
- Lockable aluminium elements fitted on the extension pipes of the outriggers
- Widenable U-profiles for inserting the ALU covers
- Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm
- Lockable aluminium elements fitted on the extension pipes of the outriggers
- 1 pair of mechanical rear supports
- Remote steering control from both front and rear by cable remote control, with axle single-track alignment control
- 1st axle with automatic lift axle function and start assist according to EU Directive 2021/535
- Under the gooseneck and at the rear crossmember left and right: 7-pin sockets with mountings for warning plates
Pjdpfxoypb Ako Aapsgk
- Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the chamfered part of the loading platform outer frame
- Central lubrication system with 1 pump, BEKAMAX
- Radio remote control for steering in addition to cable remote
- Wabco Smart Board system
- 4 warning plates, approx. 423 x 423 mm, extendable by approx. 400 mm
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-Radmu.-Ram.
Pokliči
Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm hardwood flooring
Podpfx Ajup U Hzoapsgk
Load Area:
- Extendable loading area with rear taper approx. 1,000 mm x 8°
- 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm
- Wheel recesses fitted with square climbing strips 15 x 15 mm, including lower extensions
- Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm
- Recess in the bevel as well as protruding into the loading area for parking excavator dipper stick approx. 2,900 x 750 x 210/290 mm
- 1 pair of lashing rings, installed flat at the front of the load area (LC 10,000 daN)
- 5 pairs of folding lashing rings on the outside (LC 5,000 daN)
- 2 pairs of folding lashing rings on the outside (LC 10,000 daN)
- 2 pairs of lashing rings in the dipper stick recess (LC 5,000 daN)
- Cut-outs in the outer frame of the load area for securing straps (LC 2,000 daN)
- Incl. three-part removable galvanized covers over the wheel recesses – max. point load 3.5 t / pc.
Two-piece Steel Ramps:
- One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surfacing
- Ramp with hydraulically folding ramp sections, hydraulic lifting gear, and hydraulically adjustable
Axles and Tyres:
- BPW axles and suspension, 2 rigid axles, 1 steering trailing axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock, activated via reverse gear and manually
- Air suspension with lifting and lowering valve
- Axle tool kit
- Tyres 235/75 R 17.5
- TPMS tyre pressure monitoring system in accordance with ECE R 141
Accessories Included:
- Mounts for warning signs left and right at the gooseneck and at the rear, each with socket
- One spare wheel
- 2" king pin
- One galvanized steel front wall, approx. 400 mm high
- Yellow-red air couplings at the galvanized front connector strip
- 4 wheel chocks
- Galvanized, extendable outriggers approx. 230 mm per side
- Galvanized folding supports beneath the loading area bevel
- Rear trailer bracket for rotating beacon
- Cover plates for bridging the gap between ramps and load area
- White reflective tape to EU regulations, sides and on extensions; rear in red
- Electro-hydraulic unit installed at the rear beneath the loading area
- Ramp control valves mounted on right trailer side
- European reflective panels (red-yellow) on rear of trailer
- Four extendable warning boards, approx. 423 x 423 mm, with position light
- Bracket for rotating beacon on warning boards
- Removable ALU side boards and rear board on gooseneck approx. 2,440 x 400 mm
- Rear galvanized removable stakes (structure length approx. 2,560 mm)
- 2 pairs of WADER container pockets in loading area for 20ft or 30ft container
- 3 pairs of socket pockets for stakes 100 x 50 mm in outer frame of loading area
- Removable, galvanized intermediate table with 1 pair of WADER container pockets
- Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame at loading bevelling
- Painted sand layer on chequer plates of the gooseneck and loading area for anti-slip protection
- 80 km/h speed stickers rear and both sides
- Load manometer for axle load measurement, including load chart.
Mali oglas
Dortmund
815 km
Nizki nakladalnik
FaymonvilleMAX Trailer 3-Achs-Tele-Semi m. hydr. Rampen-nlla.
Pokliči
Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck:
• Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10°
• 3 pairs of lashing rings
• 30 mm thick hardwood flooring
Extendable loading platform:
• Loading platform in extendable design with rear taper approx. 1,000 mm x 8°
• Cut-outs in outer frame of loading platform for attaching tensioning straps
• Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles
Two-piece steel ramps:
• One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering
• Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable
• Maximum load per pair: approx. 40,000 kg
Axles and tires:
• BPW axles and suspension, 2 rigid axles, 1 self-steering axle
• Technical axle load: 12,000 kg
• Electromagnetic reverse lock, activated via reverse gear or manually
• Air suspension with lift and lower valve
• Axle tools
• 235/75 R 17.5 3PMSF
Braking system:
• WABCO braking system according to EU regulations with EBS-E
Paintwork:
• First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer
• High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint
• Rear section metallized and painted in RAL 9010
Landing legs:
• JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load)
Steel construction:
• Steel construction made of high-strength fine-grain steels
• Steel grades:
• S355J2+N/S355MC
• S690QL/S700MC
Electrical system:
• Electrical system in accordance with EU regulations, 24 Volt lighting
• ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets
Accessories included:
• One spare wheel with holder
• Galvanized steel front wall approx. 400 mm high
• Yellow-red air couplings on the galvanized front connection panel
• 4 wheel chocks
• Rear mounting bracket for beacon light at the end of the semitrailer
• Recess at rear of gooseneck for ALU approach ramps
• Galvanized folding supports under the loading platform taper
• Cover plates to bridge the gap between ramps and loading platform
• White reflector tape per EU regulations on sides, extension, and red at rear
• Electro-hydraulic unit at rear, under the loading platform
• On gooseneck and ramps, left and right, each with a holder for warning signs, including socket
• Operating valves for the ramps located on the right side of the trailer
• ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm
• The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm)
• Four warning panels extendable by approx. 400 mm with a position light
• 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container
• 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform
• Galvanized extensions, extendable by approx. 230 mm per side
• 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper
• Painted anti-slip sand layer on checker plates, above king pin and loading platform
Pedpfxshlz S Ns Aapjgk
• Load gauge for axle load measurement, including load diagram
• HRM metallization (High Resistance Metallisation) of the outer frame
• Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)
Mali oglas
Dortmund
815 km
Nizki nakladalnik
Faymonville4-1+3-Achs-Tele-Semi-Radmulden-Rampen zg
Pokliči
Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck:
- Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm
- Rear gooseneck with bevel approx. 1,000 mm x 10°
Loading Platform:
- Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10°
- A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick
- Pneumatic locking with conical locking bolts and reinforced lock positions
- Hardwood covering on the loading platform bevel
Ramps:
- 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm
- Ramps with hardwood covering
- Hydraulically folding ramp tips
- Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward
- Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp
Psdjk Aht Uspfx Aapegk
Axles and Suspension:
- BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system
- Technical axle load: 12,000 kg
- 1st axle with electromagnetic reversing lock, activated via reverse gear and manually
- Air suspension with raising and lowering valve
- Tyres 235/75 R 17.5, twin tires
- TPMS tire monitoring system compliant with ECE R141
- TPMS sensors installed in all wheels including spares
Accessories included:
- Removable steel front wall, approx. 400 mm high
- 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches
- Parking position on gooseneck for warning boards when not in use
- 1 spare wheel
- On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised
- On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised
- Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin
- 2" king pin
- Guide plate on gooseneck for fifth wheel, approx. 500 mm wide
- 4 wheel chocks
- Mechanical landing gear with 2-speed gearbox and crank
- JOST Modul B – static test load = 50,000 kg
- 1 intermediate table, approx. 300 mm wide
- Extensions (galvanised) extendable by approx. 230 mm per side
- Wheel recesses with square climbing cleats
- ALU covers for the wheel recesses
- 1 pair of mechanical rear supports
- Remote steering at front and rear via cable remote control, with single track monitoring of axles
- 1st axle with automatic lift axle function
- Central lubrication system with 1 BEKAMAX brand pump
- Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring
- Wabco Smart Board System
- 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
FaymonvilleMAX Trailer 3-A-S-hyd.Ladebo.-hyd.Rampen
Pokliči
Stanje: novo, lastna masa: 10.300 kg, največja dovoljena obremenitev: 39.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck:
- Gooseneck with rear chamfer approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Loading Platform:
- Loading platform after the gooseneck, hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°
- Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN)
- Approx. 48 mm thick hardwood flooring, over the axles with chequer plate covering
Two-part Steel Ramps:
- One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering
- Ramps with hydraulically folding ramp parts, hydraulic lifting system, and hydraulically adjustable
Pgjdpfeu Hp Hrjx Aapsk
- Maximum load per pair: 40,000 kg
Axles, Suspension and Tires:
- BPW axles and suspension, 2 rigid axles, 1 self-steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock, activated by reverse gear and manually
- Air suspension with lift and lower valve
- Axle tool
- Tires 235/75 R 17.5 3PMSF
- TPMS tire pressure monitoring system in accordance with ECE R 141
Accessories Included:
- One spare wheel with holder in front of the bulkhead
- 2" kingpin
- One galvanized steel front wall approx. 400 mm high
- Yellow-red air couplings at the galvanized connection strip in front
- 4 wheel chocks
- Galvanized folding supports under the platform's rear chamfer
- A holder for a rotating beacon at the rear of the trailer
- Cover plates to bridge the gap between ramps and platform
- White reflective tape as per EU regulations along the sides of the trailer and red at the rear
- Electro-hydraulic unit at the rear, under the platform
- At the gooseneck and at the ramps left and right, each with a holder for warning signs, including socket
- Control valves for the ramps positioned on the right side of the trailer
- European reflective plates (red-yellow) at the rear of the trailer
- Manual and description on USB stick
- Removable ALU side walls and rear wall on the gooseneck approx. 2,440 x 400 mm
- The rear, galvanized side stakes are removable (body length approx. 2,560 mm)
- An electric cable winch with radio remote control, approx. 5,400 kg lifting force, including 9.5 mm steel cable, 24 m long, with guide roller
- Bolted 5 t ring for cable deflection of the winch on the gooseneck without pulley
- 2 pairs WADER container pockets in the platform for a 20ft container
- 6 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the platform
- Lift axle on the front axle with control via TEBS E, depending on actual axle load and loading condition
- 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
- 1 pair of recessed lashing rings along the central beam at the rear chamfer (LC 10,000 daN)
- Sand coating for slip resistance painted on the chequer plates on the gooseneck and on the platform
- Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protection
- Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm
- Speed stickers 80 km/h rear and on both sides
- Load manometer for determining axle loads including load chart
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then all defined visible surfaces metallized and hot-coated with ZINACOR 850 (zinc 85% - alu 15%)
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
Faymonville3-Achs-Semi-hydr.Ladeboden-Rampen-Gitter
Pokliči
Stanje: novo, lastna masa: 10.900 kg, največja dovoljena obremenitev: 37.100 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear bevel approx. 1,000 mm x 6°
- Technical king pin load: 18,000 kg
- For tractor units: 4 x 2 and 6 x 2
Loading platform:
- Loading platform, approx. 9,600 mm long with rear taper approx. 900 mm x 6°
- Platform area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, with a load capacity of up to approx. 9,000 kg
- Grating surface and steel sheet floor approx. 5 mm thick as additional reinforcement on the sloped section of the platform
Ramps:
- One pair of two-section AXS steel ramps, approx. 4,675 mm long and approx. 900 mm wide
- Grating surface
- Hydraulically folding ramp tips
- Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward
- Painted sand coating on the outer frame and ramp tips
- Flashing lights on the outer sides of the ramp tips with control switch next to the ramp operation panel
- Ramp lock in transport position with quick-release fastener
Pgedpeuadk Nsfx Aapjk
Axles, suspension and tires:
- BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steerable (trailing)
- 1st axle with traction assistance
- Operated via brake pedal in the tractor unit
- Technical axle load: 12,000 kg
- Air suspension with lift and lower valve
- 235/75 R 17.5
- TPMS tire pressure monitoring system compliant with ECE R 141
- TPMS tire pressure sensors installed on all wheels including spare wheels
Brake system:
- WABCO EBS-E braking system in accordance with EU regulations
Paintwork:
- Trailer MB 7350 Novagrau
Equipment included:
- Removable front steel wall, approx. 400 mm high
- 3 kW electro-hydraulic power unit for hydraulic operations, except for hydraulic winches
- Gooseneck guide plate for the fifth wheel, approx. 500 mm wide
- JOST Module B – static test load = 50,000 kg
- Continuous grating with 5 mm steel underlay as additional reinforcement
- Painted sand coating
- Cutouts in the outer frame of loading platform and lift bed for hooking hydraulic ramp control valves on the right-hand side of the vehicle
- 2" king pin
- Central lubrication system with 1 pump, brand BEKAMAX
- 1 pair of plug-in ALU side boards on the gooseneck, approx. 400 mm high, anodised
- Electric winch, approx. 5,400 kg pulling force, with radio remote control
- Steel wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller
- WABCO Smart Board system
- 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm
Mali oglas
Dortmund
815 km
Nizki nakladalnik
FaymonvilleMAX Trailer 5-Achs-Tele-Semi-nachlaufg.
Pokliči
Stanje: novo, lastna masa: 14.800 kg, največja dovoljena obremenitev: 61.700 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck:
• Gooseneck with rear chamfer of approx. 750 mm x 10°
• 3 pairs of lashing rings
• 30 mm thick hardwood flooring
Loading Platform:
• Extendable loading platform with rear chamfer of approx. 500 mm x 8°
• 9 pairs of folding external lashing rings
• 1 pair of recessed lashing rings at the front of the loading platform
• Cutouts in the outer frame of the loading platform for attaching tension belts
• Approx. 48 mm thick hardwood flooring, checker plate above the axles
Landing Legs:
• JOST mechanically operated landing legs with 2-speed gearbox for 24t lifting capacity (50t test load)
Axles and Tyres:
• BPW axles and suspension, 1st axle steering, 2nd and 3rd axle fixed, 4th and 5th axle follow-steering
• Technical axle load: 12,000 kg
• 1st, 4th, and 5th axles with electromagnetic reverse lock, activated via reverse gear or manually
• Tyres: 235/75 R 17.5 3PMSF
Brake System:
• WABCO brake system in accordance with EU regulations including EBS-E (4S3M)
Paintwork:
• Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer
• High-quality single-color two-component (2K) topcoat in MB 7350 Novagrau
• Rear section metallized and painted in RAL 9010 (Pure White)
Steel Construction:
• Steel structure made from high-strength fine-grain steels
• Steel grades:
• S355J2+N/S355MC (yield strength 355MPa)
• S690QL/S700MC (yield strength 690MPa)
Accessories:
• One spare wheel with holder in front of the front wall
• 2" king pin
• Galvanized steel front wall, approx. 400 mm high
• Front galvanized connection strip with yellow-red air couplings
• 2 wheel chocks with holders mounted on the front wall
Podpfoma Hf Rox Aapjgk
• Rear mount on gooseneck for ALU drive-on ramps
• Galvanized extendable wideners appx. 230 mm per side
• Bracket for a beacon at the rear of the trailer
• Galvanized supports under the chamfer of the loading platform
• White reflector tape on the sides as per EU regulations, red at the extension and rear
• Mounts for warning panels including socket left and right at the gooseneck and rear panel
• Detachable ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm
• Rear galvanized plug-in stanchions removable (body length approx. 2,560 mm)
• 3 pairs of WADER container pockets in the loading platform for a 20ft (30ft) or a 40ft container
• 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform
• Lifting axle on the front axle with TEBS E control according to the current axle load and loading condition
• Movable mounting rails for ALU drive-on ramps at the rear of the vehicle
• 20 x 20 mm square climbing strips at 200 mm intervals on the outer frame chamfer of the loading platform
• BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump cover
• Four extendable warning panels approx. 423 x 423 mm with a position light, extendable by approx. 400 mm
• Holder for beacon mounted on the warning panels
• European reflector plates (red-yellow) on the rear of the trailer
• 80 km/h speed limit stickers at rear and both sides
• Axle load gauge with load diagram included
• HRM Metallisation (High Resistance Metallisation) of the outer frame
• Complete steel structure is shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminum 15%) using hot finishing
Mali oglas
Dortmund
815 km
Nizki nakladalnik
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-RM-ALU-Ram.
Pokliči
Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring, 30 mm thick
Loading area:
- Telescopic loading area with rear chamfer approx. 1,000 mm x 8°
- 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm
- Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom
- Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm
- 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc.
- Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm
- 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN)
- 5 pairs of foldable external lashing rings (LC 5,000 daN)
- 2 pairs of foldable external lashing rings (LC 10,000 daN)
- 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN)
- Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN)
One-piece aluminum ramps:
- 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm
- Ramp with spring lifting mechanism and manually adjustable
- Maximum load per pair: 24,000 kg
Axles and tires:
- BPW axles and suspension, 2 rigid axles, 1 trailing steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reversing lock, activated via reverse gear and manually
- Air suspension with lift and lower valve
- Axle tool
- Tyres 235/75 R 17.5
- TPMS tire pressure monitoring system compliant with ECE R 141
Accessories included:
- 1 spare wheel with holder in front of the bulkhead
- 2" kingpin
- 1 galvanized steel front wall approx. 400 mm high
- At the galvanized coupling rail at the front, yellow-red air couplings
Podpoiu Er Asfx Aapjgk
- 4 wheel chocks with holder at the bulkhead
- Mounting point at the rear of the gooseneck for ALU ramps
- Galvanized extensions, extendable by approx. 230 mm per side
- Galvanized folding supports under the chamfer of the loading area
- 1 holder for a rotating beacon at the rear of the trailer
- White reflective tape laterally, at the extension, and red at the rear, per EU regulations
- At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket
- On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm
- The rear galvanized stakes are removable (body length approx. 2,560 mm)
- 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container
- 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area
- 1 removable galvanized intermediate table with 1 pair of WADER container pockets
- 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area
- Anti-slip sand coating on the checker plates on the gooseneck and the loading area
- Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light
- Holder for rotating beacon on the warning signs
- 80 km/h speed stickers at the rear and on both sides
- Load gauge for determining axle loads including load diagram
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
FAYMONVILLE5-Achs-Doppel-Tele-Semi-Sattelauflieger
Pokliči
Stanje: novo, lastna masa: 15.450 kg, največja dovoljena obremenitev: 65.550 kg, skupna masa: 80.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 21.900 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 925 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck:
Gooseneck in SNT design for optimized platform length, approx. 3,700 mm long, with rear tapering of approx. 1,000 mm x 10°
Technical fifth wheel load: 30,000 kg. For tractors: 4x2, 6x2, and 6x4
Loading Platform:
Double-extendable loading platform, approx. 8,800 mm long with rear taper of approx. 500 mm x 10°. A support table approx. 300 mm wide is welded to the central beam, featuring elongated slots at the front and rear for optional bridge elements that can be hooked in and repositioned
Pneumatic locking with conical locking pin and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adjust to the respective platform length
Pgsdpfx Aaorigw Rspjk
Axles and Tyres:
BPW axles and suspension, first axle self-steering, all other axles hydraulically and mechanically forced-steered
First axle equipped with an electro-magnetic reverse lockout, activated via reverse gear and manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve
Manufacturer by our choice
Sockets and Lighting:
24-volt lighting system in accordance with EU regulations
ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets
Complete HRM metallizing
Full steel construction, shot-blasted, then hot-finished with ZINACOR 850
Paintwork:
6-stage finishing process: Complete steel construction shot-blasted after welding
1 coat of zinc-based primer, 1 coat of adhesion primer. Final paintwork in 2 coats of 2K paint in single-tone DB 7350 Novagrau, followed by cavity sealing with special wax
Accessories:
Detachable front wall made of steel, approx. 400 mm high
Connection strip for supply lines to the tractor unit, fitted at the height of the outer frame profile
ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. If your pin configuration deviates from the ISO connector standard, please inform us
3 kW electro-hydraulic power unit for hydraulic functions (excluding hydraulic winches)
1 pair of plug-in ALU sidewalls on the gooseneck, approx. 400 mm high, anodized finish
3.5'' king pin. Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide
2 wheel chocks with holder in front of the front wall
Mechanical landing legs with 2-speed gearbox and crank
Control valves for hydraulic ramps located on the right side of the vehicle
1 pair of mechanical rear supports
Central lubrication system with 1 pump, BEKAMAX brand, using standard grease according to NLGI-2
Removable guard covering the pump(s) of the central lubrication system
Remote steering from front and rear, controlled by cable remote with push buttons, with axle tracking control, no installation required on tractor unit
Under the gooseneck and on the rear crossmember, one 7-pin socket with holder for warning signs each on left and right. One 7-pin socket on the rear crossmember
Manual and documentation
One-piece INOX stowage box, approx. 2,480 x 340 x 390 mm, straight design
Please note that any special equipment and accessories will increase the unladen weight and correspondingly reduce the payload
Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and brackets for beacon.
Mali oglas
Dortmund
815 km
Nizki nakladalnik
Faymonville3-Achs-Tiefbett-Pendelachsen-Bolzen-Laschenkupp.
Pokliči
Stanje: novo, lastna masa: 17.250 kg, največja dovoljena obremenitev: 48.700 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 17.250 kg, Oprema: ABS, Gooseneck:
- Gooseneck in SNT design to optimize loading platform length, approximately 3,750 mm long
- Gooseneck hydraulically liftable, lowerable, and detachable
- For tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly)
Lowbed:
- Lowbed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension
- Length x width approx. 7,550 mm x 2,740 mm
- Mechanical locking of the extension
Chassis:
- Rear chassis with closed outer frame
- Checker plate surface and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear
Axles, Suspension, and Tyres:
- “PENDEL-AXLE”, all axles hydromechanically forced steered
- Burst protection valve on the axle compensation cylinders with automatic reset function
- Hydraulic cylinders with shut-off valves and plug pins for securing in raised position
- Final coating of axles: two coats of single-color 2-component paint in "FAY-Grey-34-0260"
- Technical axle load 12,000 kg
- Hydraulic axle compensation
- 245/70 R 17.5
Accessories:
- Detachable steel front wall, approx. 400 mm high
- 4 wheel chocks
- Rear upper gooseneck area closed with removable cover
Pjdpfx Aaeh Hm Tzopjgk
- 1 pair of steel ramps with climbing bars and locking bolts to bridge the lowbed mounting hooks
- Ramps can be positioned over or between the hooks
- Mounting options for steel drive-on ramps at the rear, between the outer beams of the gooseneck
- Locking point approx. every 1,000 mm on the extension
- 1 lashing ring each, left and right, on the front cross member
- Supply line connection strip for tractor unit, mounted at the height of outer frame profile
- 6 pairs of threaded blocks on the exterior of the load floor inner beams for attaching M24 screw rings
- 6 pairs of recessed lashing rings on the outside of the load floor outer beams, foldable inwards and outwards
- 1 pair of threaded blocks on the front and rear of the load floor outer beams for M24 screw rings
- Mounting rail for loose aluminum approach ramps on the end cross member of the vehicle
- Central lubrication system with 2 pumps, brand BEKAMAX
- Remote steering front and rear, cable remote controlled, with axle tracking control
- 3 kW electro-hydraulic power unit for hydraulic operations, except hydraulic winches
- Removable galvanized loading floor, can be placed in 3 elements between the outer beams, with hardwood covering
- Foldable extensions, approx. 230 mm per side
- Loose extension boards, steel-edged
- 4 warning signs approx. 423 x 423 mm
- Radio remote control for rear steering
- 3.5” kingpin
- Anti-slip coating on the left chamfer of the gooseneck
- Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings
- Guide plate from gooseneck for the fifth wheel plate, approx. 800 mm wide
- 1 spare wheel with mounting adapter
- Parking position on the gooseneck for warning signs when not in use
- 2 pairs of stake pockets integrated into the chassis outer frame, for plug-in stakes approx. 100 x 50 mm
- Excavator stick trough of rear chassis closed at the rear with a removable plate
- Trailer color: Mercedes-Benz 7350 Novagrey
Znak zaupanja
Prodajalci, certificirani pri TruckScout24

Mali oglas
Dortmund
815 km
Nizki nakladalnik
FaymonvilleMAX Trailer 3-Achs-Tiefbett mit Pendelachsen
Pokliči
Stanje: novo, lastna masa: 17.500 kg, največja dovoljena obremenitev: 43.500 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck:
- Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and detachable
- For tractor units: 6x4 or 8x4
Pedsh Hm Thjpfx Aapsgk
Lowbed:
- Lowbed with external beams, extendable version, "SUPER LOW" design, approx. 7,550 mm long
- Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking device
- Service lines are protected within the extendable beams and automatically adjust to the lowbed length
Rear Undercarriage:
- Rear chassis with closed outer frame, checker plate cover, and continuous prism-shaped excavator trough approx. 1,450/900 x 505 mm, open at the rear
- 2 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame
Axles and Tires:
- "PENDULUM AXLE", all axles hydro-mechanically forced-steered
- Hose rupture valve on axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and locking pins for securing in raised position
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tyres 245/70 R 17.5 / 3PMSF
Included Accessories:
- Prepared for bolt-on container positioning for 1x 20ft or 1x 40ft container on the outer beams
- 2" kingpin
- Galvanized steel front wall approx. 400 mm high
- One spare wheel with holder
- At the galvanized front adapter bar yellow-red air couplings
- 4 wheel chocks
- Remote rear steering from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles
- Hydraulic line connections from gooseneck to lowbed with multi-coupling instead of screw coupling
- Electro-hydraulic power pack
- White reflective tape to EU specifications on sides, extension, and rear red
- 2 wooden blocks 500x250x200 mm
- European reflective plates (red-yellow) on the trailer rear
- At the gooseneck and rear wall left and right each a bracket for warning boards including socket
- Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2
- Load gauge for determination of axle loads including load diagram
- On the gooseneck, plug-in ALU side and rear boards approx. 2,000 x 400 mm
- The rear galvanized insert posts are removable (body length approx. 2,120 mm)
- Separate air connection for air gun on the gooseneck
- Duomatic air coupling from gooseneck to lowbed
- Rear upper section of gooseneck closed with removable cover
- 1 pair of steel ramps to bridge the lowbed's pick-up hooks
- Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm
- Wireless remote control for rear steering in addition to cable remote, with signal lights at receiver for single-track monitoring
- 6 pairs of threaded blocks between lashing rings under the top chord on the outer beams for mounting screwable RUD rings VLBG-4
- 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading bed
- Foldable extensions, approx. 230 mm per side
- Loading area features a painted sand layer for anti-slip protection
- Dipper stick trough of rear chassis closed at front and rear with plug-in plates
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)
Mali oglas
Dortmund
815 km
Platforma
FaymonvilleMAX Trailer 3-Achs-Mega-Tele-Plateau-Radmulden
Pokliči
Stanje: novo, lastna masa: 9.500 kg, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, obratovalna teža: 9.500 kg, Oprema: ABS, Loading platform in extendable design:
Loading platform with hardwood planks, rear bevel approx. 1,000 mm x 8°
1 pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm
2 pairs of lashing rings (LC 5,000 daN)
1 pair of lashing rings (LC 10,000 daN)
6 pairs of fold-out lashing rings on the outside (LC 5,000 daN)
2 pairs of fold-out lashing rings on the outside (LC 10,000 daN)
Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN)
Brake system:
Brake system as per EU regulations with EBS-E (2S2M)
Paintwork:
Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer
High-quality single-colour 2-component (2K) top coat in Nova grey
Rear section metallized and painted in RAL 9010 (Pure White)
No metallic paint possible
Landing gear:
JOST mechanical landing gear with 2-speed gearbox for 24t lifting capacity (50t test load)
Steel construction:
Steel construction from high-tensile fine-grain steels
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Electrical system:
Electrical system according to EU regulations, 24 volt lighting
Sockets: 24N, 24S & 15-pin
Podpfxjk Eammo Aapjgk
Axles and tyres:
BPW axles, air suspension, with disc brakes (377 mm), with lift/lower function
Trailing steering axles with electro-magnetic reversing lock, actuated via reverse gear or manually
Axle tool
Tyres: 435/50 R 19.5
Accessories included:
At the galvanized front connection strip: yellow-red air couplings
4 wheel chocks with brackets
2" kingpin
Galvanized steel front wall approx. 1,600 mm high, EN12642-XL
White reflective tape to EU standards on the sides, extension section and red at the rear
Loading platform with heavy-duty hardwood floor
9 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform
1 spare wheel holder under the platform on the right (direction of travel)
Galvanized folding supports under the rear slope of the loading area
Sliding mounting rails for ALU loading ramps at the rear of the vehicle
European reflective plates (red-yellow) at the rear of the semi-trailer
One mudflap at the rear of the semi-trailer
Bracket for a rotating beacon at the rear of the semi-trailer
At the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket
One HDPE toolbox 620x360x610 under the platform on the left (direction of travel)
4 pairs of WADER container locks in the platform for 1x 20ft container or 1x 40ft container; additional locking position in the extension for a 45ft container
3 pairs of transverse stake pocket rails on the platform for 100 x 50 mm plug-in stanchions
Lift axle on the front axle with control via TEBS E, depending on current axle load and loading condition
Speed stickers 80 km/h on the rear and both sides
Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Mounting for rotating beacon on warning boards
Load gauge including axle load diagram
HRM metallization (High Resistance Metallisation) of the outer frame
Complete steel structure shot blasted, then specified visible surfaces metallized
Mali oglas
Dortmund
815 km
Nizki nakladalnik
FaymonvilleMAX Trailer 3-Achs-Mega-Tele-Plateau-zwangsgel.
Pokliči
Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 35.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 940 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading area:
- Loading deck in extendable design
- Loading deck with hardwood planks, rear bevel approx. 500 mm x 8°
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 3 pairs of outward-folding lashing rings (LC 10,000 daN)
- Cut-outs in the loading deck's external frame for attaching tension belts
Braking system:
- Braking system in accordance with EU regulations, with EBS-E (2S2M)
Painting:
- First-class, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer
- High-quality two-component (2K) top coat in solid Novagrey
- Rear section metallised and painted in RAL 9010 (pure white)
- Metallic paint not available
Landing gear:
- JOST mechanical landing gear with 2-speed gearbox, 24t lifting capacity (test load 50t)
Steel construction:
- Steel structure made from high-strength fine grain steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355 MPa)
- S690QL/S700MC (yield strength 690 MPa)
Electrical system:
- Electrical system according to EU regulations, LED lighting 24 Volt
- Sockets: 2x 7-pin & 15-pin
Axles and tyres:
- BPW axles, air suspended, with disc brakes (377 mm), with lifting/lowering function
- Hydro-mechanically forced steering
- Axle tools
- Twin tyres 235/75 R 17.5
Accessories included:
- Yellow-red air couplings at the galvanised front connection bar
- 4 wheel chocks with holder
- 2" king pin
- Galvanised steel headboard approx. 1600 mm high
- White reflective tape on the sides, sliding section and rear in red in accordance with EU regulations
- Loading deck with heavy-duty hardwood floor
- Rear and front steering by cable
- Remote control via push buttons, with single-track monitoring of the axles
- With wireless remote control for rear steering
- 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading deck
- Galvanised folding supports under the loading deck bevel
- Sliding mounting rail for aluminium loading ramps at the rear of the vehicle
- European reflective panels (red-yellow) at the trailer rear
- One mud flap at the trailer rear
- Mount for a beacon at the trailer rear
- Mounts for warning boards including socket on gooseneck and rear panel, each left and right
- Stainless steel toolbox INOX 1,500 x 390 x 810 under the loading deck, right side in driving direction
- Central lubrication system BEKAMAX (Pico) with NLHI-2 multipurpose grease and removable protection around pump
- 6 pairs of WADER container locks on the loading deck for 1x 20ft, 2x 20ft or 1x 40ft containers, additional locking for one 45ft container in extendable section
- 4 pairs of crosswise stake pocket strips mounted in the loading area for 100 x 50 mm plug-in stakes
- Lift axle on the first axle, controlled by TEBS, dependent on current axle load and load condition
- 80 km/h speed stickers at the rear and on both sides
- Four extendable warning boards ca. 400 mm (approx. 423 x 423 mm) with LED position light
- Beacon mount on the warning boards
- Load gauge for axle load determination, including load diagram
- HRM metallisation (High Resistance Metallisation) on the external frame
Pgodsl Ux Rwopfx Aapjk
- Complete steel construction shot-blasted, then all defined visible areas metallised with ZINACOR 850 (85% zinc, 15% aluminium) by thermal spraying
Mali oglas
Dortmund
815 km
Platforma
FaymonvilleMAX Trailer 3-Achs-Doppeltele-Plateau zwangsgel.
Pokliči
Stanje: novo, lastna masa: 11.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.250 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, barva: sivo-črna, Oprema: ABS, Loading platform:
Loading platform in extendable design with pneumatically operated locking mechanism
A fixed intermediate table, approx. 250 mm wide, is mounted on the central beam
8 pairs of lashing rings, foldable outwards (LC 5,000 daN)
3 pairs of lashing rings, foldable outwards (LC 10,000 daN)
Openings in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN)
Axles and tyres:
BPW axles and suspension, all axles with hydro-mechanical forced steering
Disc brakes, technical axle load: 10,000 kg
Air suspension with lift and lower valve
Axle tools
6 tyres, size 385/65 R 22.5
Brake system:
Brake system according to EU regulations with EBS-E (2S2M)
Landing gear:
JOST landing legs (mechanically operated) with 2-speed gearbox for 24 t lift load (50 t test load)
Steel construction:
Steel construction made of high-strength fine-grained steels
Steel grades:
Pgjdpfx Aaohlz Shjpsk
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Electrical system:
Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX mounted on the front terminal board with 24N, 24S & 15-pin sockets
Connections according to ISO:
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Paintwork:
First-class, long-lasting corrosion protection of the standard grit-blasted welded frame, guaranteed by a 2-component (2K) zinc-dust primer
High-quality, single-colour 2-component (2K) top coat in Novagrau
Rear section metallised and painted in RAL 9010 (pure white)
No metallic paint finish possible
Included accessories:
At the gooseneck and at the rear plate, left and right, each with a bracket for warning signs, including socket
Remote steering from the front and rear via cable remote control with push buttons, with single-track control of the axles
Electro-hydraulic unit
4 wheel chocks with brackets on the front wall
2" kingpin
A galvanised steel front wall approx. 2,200 mm high
Yellow-red air couplings on the galvanised front terminal board
White reflective tape on the side, at the extension and rear in accordance with EU regulations, red at the rear
European reflective plates (red-yellow) on the rear of the trailer
One mud flap on the rear of the trailer
Manual and documentation
Bracket for a revolving warning light at the rear of the trailer
Loading platform with approx. 30 mm thick wooden floor set in omega profiles
10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform
1 spare wheel holder under the loading platform on the right-hand side in the driving direction
6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; in the extension, an additional locking position is provided for a 45ft container
5 pairs of stake pocket strips, mounted transversely in the loading platform, for plug-in stanchions 100 x 50 mm
A galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm)
Access ladder mounted on the right in the direction of travel
One HDPE toolbox 1,200x500x480 mounted at the front under the loading platform on the left in the direction of travel
Lift axle on the front axle with control via TEBS E depending on the current axle load and loading status
Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pump
Red/white reflective tape on the extension of the loading platform
On the central beam,
Olajšamo vam iskanje: "faymonville spz-3a plattform, ausziehbar auf 21m, gelenkt"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.










































































































































































































































































