Polpriklopnik z nizkim nakladalnikom

Faymonville MAX Trailer 4-A-Mega-Tele-Semi-Rampen

For every used semi-trailer, you will receive a current and comprehensive inspection and functional report.

Gooseneck:
- Gooseneck with 30 mm thick hardwood flooring
- Gooseneck rear section designed straight
- 3 pairs of lashing rings (LC 5,000 daN)

Extendable loading platform:
- Loading area designed with extension capability
- 5 pairs of folding lashing rings to the outside (LC 5,000 daN)
- 3 pairs of folding lashing rings to the outside (LC 10,000 daN)
- 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN)
- Cut-outs in the outer frame of the loading area for attachment of tensioning straps (LC 2,000 daN)
- Approx. 48 mm thick hardwood flooring, with checker plate surface above the axles

Two-part steel ramps:
- One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood surface
- Ramps with hydraulically foldable sections, hydraulic lift system, and hydraulically adjustable
- Maximum load per pair: 40,000 kg

Axles and tires:
- BPW axles; two fixed axles, two self-steering axles
- Air suspension, drum brakes, with lifting/lowering function
- Self-steering axles equipped with electromagnetic reverse lock, activated via reverse gear or manually
- Axle tools
- Tires 205/65 R17.5
- TPMS (Tire Pressure Monitoring System) compliant with ECE R 141

Accessories included:
- One spare wheel with carrier in front of the bulkhead
- 2" kingpin
- One galvanized steel front wall, approx. 400 mm in height
- Yellow-red air couplings at the galvanized connection strip at the front
- 4 wheel chocks with holders at the bulkhead
- Galvanized folding supports under the loading platform slope
- Bracket for beacon at the rear of the trailer
- Zinc-plated, extendable wideners: approx. 230 mm per side
- White reflective tape to EU regulations on the sides, extension and red to the rear
- Mounting brackets for warning boards on both the gooseneck and the rear panel, including socket outlet
- One mudflap at the rear of the trailer
- European reflector plates (red-yellow) at the rear
- Plug-in ALU side and rear walls on the gooseneck, approx. 2,440 x 400 mm
- Removable, galvanized rear stanchions. Body length approx. 2,560 mm
- 7 pairs of WADER container locks:
- 1x 20ft container on loading platform
- 1x 40ft container on loading platform
- 1x 40ft container above gooseneck
Gbodpfx Aajxwnfmjcow
- 2x 20ft containers
- Support block with 1 pair of WADER container locks (kingpin load approx. 20,000 kg)
- 7 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area
- Lifting axle on front axle with control via TEBS E, depending on current axle load and load condition
- Sliding hanging rail for ALU loading ramps at the rear of the vehicle
- Anti-slip painted sand coat on checker plates on gooseneck and loading platform
- Four warning panels extendable by approx. 400 mm, approx. 423 x 423 mm, each with a position lamp
- Beacon mounting bracket on warning panels
- 80 km/h speed stickers at rear and both sides
- Load gauge for determining axle loads, including load diagram

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.