Priklopnik sedeža z delovno ploščadjo

FAYMONVILLE MAX410 Ballastauflieger

Stanje: rabljeno, največja dovoljena obremenitev: 44.420 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 11.500 mm, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment. Complete equipment details on request. Loading platform: * Loading bed with approx. 30 mm thick hardwood floor Nledpfxsyu Eu Io Aanoc * 9 pairs of folding lashing rings towards the outside (LC 10,000 daN) * 10 pairs of stake pockets in the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm Landing gear / Support legs: * Hydraulic landing gear Tyres: * Tyres 385/65 R 22.5 - MICHELIN MULTI High Load 164K TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is carried out via the standardised EBS interface according to ISO 11992. For correct display, the truck must be capable of transmitting and displaying this data. Axles and suspension: * BPW axles, technical capacity 10,000 kg each, first axle hydro-mechanically steered, second axle fixed, and third axle hydro-mechanically forced-steered, mounted on turntable * Air suspension with raise/lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin connectors according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Coating: * Entire steel construction shot-blasted automatically after welding using a turbine blast machine * Second blasting treatment with corundum for optimal adhesion of the coating system * HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 9005 Jet Black as per RAL System 841GL * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver grey * Coating tested by salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Included accessories: * Loading platform with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * DUOMATIK air couplings at the galvanized connection rail at the front * Storage for approx. 1,000 mm plug-in stakes, rear in the central beam * On the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket * White reflective tape in accordance with EU regulations on the sides and red at the rear * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading platform * European reflective plates (red-yellow) at the rear of the trailer * One holder for a rotating beacon at the rear of the trailer * One mud flap at the rear of the trailer * Manual and description on USB stick * BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable pump cover * 4 wheel chocks with holder on the front wall * Steering from the front and rear via cable remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic unit * 6 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of crosswise stake pocket bars mounted in the loading plat

Stanje: novo, največja dovoljena obremenitev: 52.810 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, featuring vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available upon request. Loading platform: * Platform with approx. 30 mm thick hardwood floor * 10 pairs of hinged external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system in compliance with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For proper display, the tractor unit must be capable of transmitting and displaying this data. Axles and suspension: * BPW axles, technical load capacity 12,000 kg each, first axle rigid, all other axles hydro-mechanically force-steered, mounted on turntables * Air suspension with lift and lower valve * Axle tools Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking system: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor Steel construction: * Steel structure made of high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (Yield strength 355MPa), S690QL/S700MC (Yield strength 690MPa) Painting: * Entire steel structure automatically shot-blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of two-component topcoat, single colour in RAL 1007 Daffodil Yellow, as per RAL 841GL system * Rear section metallized and painted in RAL 9010 (Pure White) * Rims Silver Grey * Paint system tested in salt spray test according to ISO 9227-NSS * All cavities sealed with special wax Including accessories: * Platform with approx. 30 mm thick hardwood floor * 2 inch kingpin Nlodjxttc Ajpfx Aanec * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanized front connection strip * At the gooseneck and rear plate left and right one bracket each for warning signs including socket * Steering from front and rear via wired remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes on the outer frame of the platform * Load pressure gauge for axle load determination including load diagram * Lift axle on the front axle controlled by TEBS E * 5 pairs of stake pocket strips across the platform for approx. 100 x 50 mm plug-in stakes * One INOX toolbox 1,200 x 460 x 550 mm, mounted at the front left underneath the platform (in direction of travel) * 1 tow coupling with reinforcement bolted to the rear crossmember * BEKAMAX central lubrication system (Pico) with NLGI-2 standard grease and removable protection for the pump * 2 LED reversing lights mounted on the rear plate * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum)