Priklopnik za platformo

GS Meppel AC-2800L Dutch Registration, 3 Axles, 20t L

Stanje: rabljeno, lastna masa: 5.100 kg, največja dovoljena obremenitev: 12.900 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 12/1998, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 1 mm, skupna dolžina: 2.550 mm, skupna širina: 1.600 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, medosna razdalja: 5.400 mm, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing eyes, container locking system, underrun protection, pneumatically adjustable drawbar, side aluminum underrun protection, twin tires, storage box, removable side panels Wheelbase: 5400 mm Body: Trailer for roll-off containers with lengths from 6m to 6.75m, SAF axles type SKRZ 11030, pneumatic low-tension hook device, 2x pockets for plug-in locking hooks, 4x pockets for plug-in container centering and skip stops. The trailer can also be used as a flatbed! Aluminum side panels with a height of 600 mm are included with the trailer! Itedpfei Rpxwex Ab Ujr Ramps available at an additional price of €900.00 net! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors.

Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform: - Gooseneck, length approx. 4,100 mm with central beam - Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps - Pneumatic locking system with conical locking bolts and reinforced locking positions - Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles, Suspension, and Tyres: - BPW axles and suspension, all axles hydro-mechanically forced steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R17.5, twin-mounted Paintwork: - 6-coat surface treatment - Complete steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax Steel Structure: - Steel structure made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) Ijdpfoiuy Nlox Ab Uotr - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket at the front connection strip - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck) - 2'' kingpin - Mechanical landing legs with 2-speed gearbox and hand crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles - One locking position on the extension, approx. every 500 mm - 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards - 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm - 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Tapered end crossmember of the vehicle, approx. 350 mm 10° - Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle - 1 pair of drop tube supports at the rear crossmember - Mudguards on all axles - Central lubrication system with 1 pump - Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles - Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels - One 7-pin socket at the rear crossmember - Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers - Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring - 2 axle load gauges + axle load diagram - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN

Stanje: rabljeno, številka stroja/vozila: 28be789c7675b811b702c6cb3, lastna masa: 6.000 kg, največja dovoljena obremenitev: 20.000 kg, skupna masa: 26.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2018, velikost pnevmatike: 205 / 65 r 17,5, Further Information Fine-grained steel welded construction, fifth wheel plate with replaceable 2-inch kingpin. Reinforced pickup point for gallows-mount, equipped with sturdy wear plates all around; channel profile from flat steel beneath the outer frame. Outer frame slightly tapered with load-lock profile for securing lashing straps. Note: To attach straps in combination with sidewalls, the sidewalls must be open! 24-ton two-speed landing gear, one-sided operation, with straight lower section, without compensating slide. Wheel chocks with holders, aluminum side underrun protection, set inwards as far as technically possible; steel rear underrun protection for maximum ground clearance; quarter-shell fenders in front of and behind each axle; hook-in rail for aluminum ramps at the rear; plastic toolbox with shelf insert (width=620 mm/height=360 mm/depth=440 mm), lockable with padlock (padlock not included). SAF drum brake axles, with axle stops; wheelbase 1,600 mm; air suspension with raise/lower valve. 205/65 R17.5, twin steel rims, factory silver finish. 2-line compressed air brake system, spring-loaded parking brake, two non-interchangeable coupling heads at the front, without connecting line; EBS (Electronic Braking System) with EBS socket at the front, no connection cable. Warning: The trailer must only be towed by towing vehicles that support proper ABS function! 24 volt, multi-chamber lights, integrated yellow side LED lighting in outer frame profile, set approx. 25 mm inwards, 10 per side. 2 white position lights at the front, protected; 2 white/red marker lights at the rear; additional LED work light at the rear, connected to reversing light. Two 7-pin and one 15-pin non-interchangeable sockets at the front, no connecting cables. Itjdpemp Ug Defx Ab Ujr Phenolic plywood flooring approx. 30 mm thick for high point load capacity, suitable for forklift axle loads up to max. 5,600 kg. Special flooring installation: testing of new profiles, no screws. In wheel arch area: steel/chequer plate overlay. Front bulkhead/corner posts made from 25 mm aluminum hollow profile, approx. 800 mm high; steel corner posts, heavy-duty version, with windows on both sides. Country of registration: Germany, with Dekra inspection and certificate (according to §13 EC – FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective tape in accordance with ECE R048, white on the sides and red at the rear.

Stanje: rabljeno, največja dovoljena obremenitev: 25.860 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2016, Oprema: ABS, Krone SZP Mega Trailer Ijdpstxffbefx Ab Ustr Flatbed with sliding curtain, Edscha sliding roof, and portal doors; lifting roof; 2 axles; BPW axles; disc brakes; air suspension; ABS.

Stanje: rabljeno, Leto izdelave: 2025, obratovalne ure: 20 h, JUWEL 8 M V 5 N 100 OF VF-2025 Lemken Mounted Reversible Plough In standard configuration, additionally equipped with: Version: OF On-land/rough-furrow. Frame Swivel: Frame with hydraulic drawbar Turning Cylinder: with hydraulic tilt adjustment + control unit Tilt Indicator: at the turntable Frame Height: 85 cm, t = 35 (5x) Mouldboard Type: Strip Dural (5x) Support Type: BS42S support on reinforcement. Cranked with hardfacing (5x) Plough Share: Cutting width 42 cm (SB56, strip) Plough Share Version: heavy-duty (5x) Landside: A42H Mouldboard Edge: standard Pendl/Universal Wheel: Universal wheel 340/55-16, inflated Wheel Position: standard Fertilizer Insert Mouldboard: MS2 (5x) Fertilizer Insert Share: Medium, 18 cm Isdpfx Aew S N U Tjb Uotr Fertilizer Insert Shank Version: standard (5x) Fertilizer Insert Shank Length: standard Throw Angle Adjustment: without throw angle adjustment Disc Coulter: 1 pair D500, smooth, adjacent to drawbar Packarm: Ready for packer arm Lighting System: (EU) preparation, 7-pole connector Working Width per Body: 30-50 cm / 30-55 cm / 36-60 cm Overload Protection: double-cut shear bolt safety BODY SET Lemken Body Set Juwel 8 V L 100 In standard configuration, additionally equipped with: Working Width per Plough Body: 20 - 55 cm Frame Height: 85 cm, t = 35 Support Type: BS42S support on reinforcement. Shares: 2SPS+SB45D/SB56D Landside: A42H Fertilizer Insert: MS2-S245 Fertilizer Insert Shank: standard Landside Disc: 1 pair Suitable for Lemken Juwel 8 M V 5 N 100

Stanje: novo, največja dovoljena obremenitev: 23.800 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Our complete selection of vehicles with immediately and short-term available units can be found on our website. Extract from the equipment. Complete equipment details available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * approx. 2,100 mm = raised front platform incl. gooseneck, front corners chamfered * approx. 5,350 mm = low-bed platform – flat loading area * approx. 850 mm = rear drive-on slope * Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm) * Load height when loaded approx. 870 mm * When operating as a combination, ensure legal overall height and length limits are observed! Frame: * Steel welded construction with front gooseneck and chamfered rear * Drive-on slope with central excavator bucket recess = indentation at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing bars (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out approx. 10 t lashing rings (4x in the low-bed, 1x at the drive-on slope, 2x on the raised platform) Itedswx Dcyspfx Ab Uer * Standard ball race turntable Frame attachments: * Both sides of the low-bed platform with extendable extensions with softwood planks approx. 50 mm (track width of construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings. Distribution: 1 pair at the front of the raised platform, inside the longitudinal beams; 1 pair to the very rear in the excavator bucket recess left and right; 1 pair at the front of the raised platform before the gooseneck, inside the longitudinal beams; 1 pair at the rear of the low-bed before the drive-on slope, in the bucket recess left and right. Draw device: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked design, silent bushing mount, drawbar retaining spring with tensioner * Truck coupling height approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support device: * 2 automatic folding supports at the rear Axles: * 3 SAF air suspension low-bed axles with drum brakes * Axle load capacity 11 t/axle * S-cam brakes approx. 300/200 mm * Automatic brake slack adjusters Wheels: * 12 pcs. tyres 235/75 R 17.5, 141J, brand by factory choice * 12 pcs. steel rims 6.75 x 17.5, with offset, silver Brake system/Suspension: * Dual-line air brake system according to ECE regulation R13 * Brake system by Wabco * EBS system 4S3M, sensing on 1st + 2nd axle * RSS/RSP – Stability Program * Spring-loaded parking brake on 2nd + 3rd axles * Steel air tanks * Brake/air connecting lines with 2 single coupling heads yellow/red * EBS/ABS connection cable * Elastics as holder for EBS and electrical plugs * Air suspension with lifting and lowering facility (rear axles only), automatic ride height adjustment from 15 km/h (RTR), axle stop on front axle Floor: * Softwood floor approx. 50 mm, impregnated, protruding approx. 5 – 10 mm above the upper frame edge * Steel checker plate covers above wheels Ramps: * 2 pcs. foldable single-section lightweight steel drive-on ramps, length approx. 2,800 mm, width approx. 750 mm, with hardwood floor approx. 35 mm, impregnated * Ramps adjustable in width from intermediate gap approx. 350 mm to max. overall width approx. 3,000 mm * Ramps can be locked in driving position by chains with tensioner * Ramp lifting aid with spiral spring * Ramps can be moved manually sideways with

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, skupna dolžina: 13.600 mm, skupna širina: 2.500 mm, skupna višina: 900 mm, vzmetenje: zrak, velikost pnevmatike: 7.50 R20, barva: drugo, Konfiguracija osi Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Sprednja os: Velikost pnevmatik: 7.50 R20; dvojna montaža; Maks. osna obremenitev: 8.000 kg; Znamka osi: BPW Zadnja os 1: Velikost pnevmatik: 445/45 R19.5; Maks. osna obremenitev: 8.000 kg; Znamka osi: ROR Zadnja os 2: Velikost pnevmatik: 445/45 R19.5; Maks. osna obremenitev: 8.000 kg; Znamka osi: ROR Zadnja os 3: Velikost pnevmatik: 445/45 R19.5; Maks. osna obremenitev: 8.000 kg; Znamka osi: ROR Teže Lastna teža: 7.500 kg Nosilnost: 26.500 kg Skupna dovoljena masa: 34.000 kg Stanje Tehnično stanje: dobro Vizualno stanje: dobro Poškodbe: nobenih Itedpfour Sx Hex Ab Usr

Stanje: rabljeno, številka stroja/vozila: GE12/084/2023, lastna masa: 7.000 kg, največja dovoljena obremenitev: 17.000 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/1998, vzmetenje: jeklo, Oprema: osrednja vrtljiva plošča, Vehicle from 1st owner Goldhofer TU3-24/80 Low loader Service history maintained Inspection book Hydraulic ramps Itsdpfx Aemx U Dpjb Ujr Payload – 17,000 kg Lashing eyes in the loading area Commercial/export net price – €9,990 Subject to alterations, prior sale, and errors excepted. ===== Telephone Mobile =====

Stanje: novo, Leto izdelave: 2023, JUWEL 8 M V X 5 L 100 (0010) Lemken priključen obračalni plug (0020) 5-brazdni, v serijski opremi (0030) V X 5 L 100 (0040) Hidravlično obračanje okvirja (0050) Širina reza 30 - 55 cm (0060) Višina okvirja 80 cm (0070) Spodnja povezava L3 Z3 (Kat. 3) (0080) Zgornja povezava Kat. 3 (0090) Oblika telesa CS50 (0100) Lemeži 2SPS+SB45D/SB56D (0110) Obrabni deli A42 (0120) Gnojilni vložek MS3-S245 Iodpsxpk Syjfx Ab Uotr (0130) Standardna gred gnojilnega vložka (0140) Kolutna rezila 1 par D500 nazobčana, desna montaža (0150) Blaženo univerzalno kolo 340/55-16 (0160) Skupna katalogska cena (0170) Podražitveni dodatek 1 (0180) Podražitveni dodatek 2 (0190) Prevoz

Stanje: rabljeno, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 08/2024, dolžina tovornega prostora: 13.590 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, skupna višina: 1.010 mm, Oprema: ABS, VIN: W09SPLB2ZPEN10219 2-Axle Semi-Trailer HRD Type: SPLB2Z Platform semi-trailer with container locks Fifth wheel load: 12,000 kg Aggregate load: 20,000 kg Warning boards for oversize, extendable Steering: Design: VSE ETS II, on both axles Axles / Suspension: Number/Capacity/Manufacturer: 2 x 10,000 kg, SAF Brakes: Drum brakes 17.5" Suspension: Air suspension with lift and lower function Axle lift: not included Axle spacing: 2,100 mm Wheel size: 235/75 R17.5" mounted on 10-hole steel rims Quantity: 8 Stainless steel toolboxes Itjdpfov T Hyfsx Ab Usr Locking positions: 6 pairs, suitable for the following positions: *11,000 mm deck flush rear *11,000 mm deck flush front 2,400 mm deck flush rear 2,400 mm deck flush front Load securing Lashing rings type: 50kN Vario (see appendix) Quantity & Position: 11 pairs in the outer frame Lashing holes: Ø 32 mm in the outer frame, c/c approx. 400 mm Stake pocket positions: 8 pairs for stakes 81 mm x 51 mm in the outer frame Stake pocket rows, crosswise: 4 rows (positions to follow) Customs plates and insurance available on request, at an extra charge! For export business, we can take care of the export declaration and registration for you against reimbursement of costs. When exporting to third countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery. For further information please contact Mr. Lübberding by mobile/WhatsApp. Always make an appointment for inspection/test drive! Just pay us a visit. We are looking forward to seeing you. ---- All details provided online are non-binding descriptions and do not represent guaranteed properties. The seller does not accept liability for typographical errors, data transmission errors, changes, input errors, or mistakes. Subject to prior sale.