Polpriklopnik z nizko nakladalno ploščadjo

Schwarzmüller STP 3/ZV-N, 3-Achse nachlaufgelenkt, mit 6x Twist

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.800 kg, največja dovoljena obremenitev: 25.500 kg, skupna masa: 36.800 kg, konfiguracija osi: 3 osi, prva registracija: 10/1998, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 450 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: rdeča, Leto izdelave: 1998, Oprema: ABS, Bertoja extendable low loader, 3 axles with 2nd and 3rd self-steering axles, air suspension, ABS, year 1998, cradle length 5.30m with an additional 3.50m extension, ground clearance 45cm, removable module above the axles, adjustable detachable gooseneck, wired remote control for steering self-steering axles, good condition. DEALER: INTERDRIVE SRL - PARMA. Lsdpfjwg E Rbox Ab Dert

Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: Extendable loading platform with rear chamfer approx. 500 mm x 8° 8 pairs of flip-out lashing rings 1 pair of recessed lashing rings at the front of the loading area Cutouts in the outer frame for securing straps Approx. 48 mm thick hardwood flooring; checker plate above the axles Two-Part Steel Ramps: One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg. Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually Tyres: 235/75 R 17.5 3PMSF Brake System: Brake system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU standards, 24 Volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer High-quality single-colour 2K topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel Structure: High-strength fine-grained steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the front wall 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connection panel 2 wheel chocks with holder on the front wall Mounting at the rear of the gooseneck for ALU approach ramps Bracket for beacon at trailer rear Galvanized supports under sloped area of load floor White reflective tape per EU regulations on sides, extension, and red at the rear Electro-hydraulic unit under the rear of loading platform Warning sign brackets including sockets left/right on gooseneck and rear plate Control valves for ramps mounted right side of trailer Mudflap at rear of trailer Manual and documentation on USB stick 3.5" loose king pin supplied On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH) Removable rear galvanized stakes (Body length approx. 2,560 mm) 3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container 6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame Galvanized extensions, extendable by approx. 230 mm per side Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload Lredpfx Abol Sl Ize Dot Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor Checker plate coverings above the king pin and loading area...

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 3.096 h, nosilnost: 3.200 kg, dvižna višina: 12.000 mm, vrsta goriva: dizel, gradbena višina: 2.570 mm, moč: 54,5 kW (74,10 KM), stanje pnevmatik: 98 odstotek, Oprema: kabina, pogon na vsa štiri kolesa, vilice za palete, Rough terrain telescopic handler JCB, model: 532-120 4x4x4, year of first use: 2001, LIFTING CAPACITY: 3,200 kg, LIFTING HEIGHT: 12.00 m, 4-cylinder PERKINS diesel engine (model: 1906/2200 – 74.12 HP / 54.50 kW at 2,200 rpm), AUXILIARY HYDRAULICS, LONG FORKS (fork length: 1,200 mm / fork carriage width: 1,400 mm), QUICK COUPLER, FOUR-WHEEL DRIVE AND FOUR-WHEEL STEERING (4x4x4) – CRAB STEERING MODE, hydraulic stabilizers (2x), OVERLOAD WARNING DEVICE, ROPS/FOPS, spacious cab (tinted safety glass), CPB, FRONT WINDSHIELD PROTECTION GRILLE, road lighting, comfort driver’s seat, windshield wipers (2x), exterior mirrors (2x), WARNING LIGHT / AUDIBLE WARNING, heating / ventilation, trailer hitch, lashing and transport rings. Tyres: BKT ALL-TERRAIN TYRES (15.5 / 80 – 24) – approx. 98% tread remaining all around. Transport dimensions: Length: approx. 6,920 mm (approx. 5,900 mm without forks), Width: approx. 2,330 mm, Height: 2,570 mm. Price is net export price, domestic sales plus statutory VAT. FINANCING POSSIBLE / TRANSPORT AT COMPETITIVE RATES (WORLDWIDE) / FOR EXPORT ONLY THE NET AMOUNT IS PAYABLE (!) © pb Lodsvbflvopfx Ab Dert

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm Lrodjhlz S Nepfx Ab Dst • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: novo, lastna masa: 6.350 kg, največja dovoljena obremenitev: 38.650 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Loading Platform: - 2 pairs of folding external lashing rings (LC 5,000 daN) - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, air suspended, with disc brakes (430 mm), lift/lower function - Tyres: 385/65 R 22.5 Braking System: - WABCO braking system compliant with EU regulations featuring EBS-E (2S2M) Paintwork: - Premium and durable corrosion protection of the standard grit-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat in single-tone MB 7350 Novagrau - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paintwork not possible Steel Construction: - Steel construction made from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system in accordance with EU regulations - Lighting: 24 volt - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets - Connection standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection bar - 4 wheel chocks with holders - 2" king pin - Galvanized steel front wall approx. 1,600 mm high, EN12642-XL - White reflector tape according to EU regulations, lateral and rear red - European reflective panels (red-yellow) at the rear of the trailer - Loading platform with approx. 30 mm thick hardwood flooring, framed in omega profiles - 10 pairs of stanchion sockets for 100 x 50 mm plug-in stakes in the outer frame - 3 pairs of transverse stanchion rack strips, fitted in the loading platform, for 100 x 50 mm plug-in stakes - Bracket for 1,000 mm plug-in stakes, rear in the central beam - 1 spare wheel carrier under the loading platform on the right hand side - 1 mudflap at the rear of the trailer - Manual and description on USB stick - Bracket for beacon at the rear of the trailer - Holders for warning signs including socket at the gooseneck and left/right rear panel - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and both sides - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light - Load gauge for axle load determination including load diagram - HRM (High Resistance Metallisation) of the outer frame Lrodpfeiu Etkex Ab Dot - Complete steel structure is grit blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot coating

Stanje: rabljeno, številka stroja/vozila: c24_68002, - Emergency power generator - New, unused Lodpfx Abermibpe Dert - 1x 140 kVA, 1x 110 kVA

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 07/2020, medosna razdalja: 8.540 mm, barva: bela, Leto izdelave: 2020, Lastna masa: 6.470 kg Nosilnost: 23.530 kg Skupna dovoljena masa: 30.000 kg Višina nakladalne površine: 90 cm Tehnično stanje: zelo dobro Optično stanje: zelo dobro NOOYENS 2-OSNA SPECIALNA POLPRIKOLICA ZA TOVORNJAK Z DIZALKO 2 OSI, ZRAČNO VZMETENJE HIDRAVLIČNO KRMLJENJE SAF OSI ŠASIJA POPOLNOMA VROČE CINKANA ALUMINIJASTE STRANICE NIZKA NAKLADALNA VIŠINA: 90 CM DOLŽINA VRATU: 375 CM Ljdoygkxispfx Ab Dert DOLŽINA NAKLADALNE POVRŠINE: 757 CM SKUPNA DOLŽINA POLPRIKOLICE: 1.200 CM PRIKOLICA JE V ODLIČNEM STANJU

Stanje: rabljeno, Leto izdelave: 2024, obratovalne ure: 99 h, Develon DX 235 LCR-7 > Demonstration machine / Like-new condition > Manufacturer: DEVELON > Type: Short-tail crawler excavator > Model: DX 235 LCR-7 > Operating weight: [please insert value] > Water-cooled 6-cylinder Develon diesel engine with 141 kW / 192 hp output > 600 mm triple grouser track shoes > Dozer blade > Adjustable boom > Full LED lighting > LED rotating beacon Ledpfst Hnpkox Ab Dort > Air conditioning (AC) > Hammer/shear hydraulics > Radio with speaker > Air-suspended driver’s seat, heated and cooled > Side and rear-view camera > Refueling pump Transport? No problem! Quick coupler and bucket set available on request!

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Braking system by WABCO EBS-E according to EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Entire steel structure automatically blast cleaned with shot blasting after welding Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rims in silver-grey Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide Lrjdpfxomfqi Ij Ab Dot On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed 1 movable intermediate table for the extension tube with large cross-section Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.860 kg, največja dovoljena obremenitev: 23.140 kg, skupna masa: 28.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 800 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 2.538 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Prilagojena rešitev za prevoz Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema potekata individualno, po željah stranke. *Podvozje, sedelna prikolica, prevozniško podjetje* Fino zrnata jeklena varjena konstrukcija, sedelna plošča z dvema zamenljivima sedelnima klinom Zunanji okvir rahlo nagnjen, nova izvedba z Load-Lock profilom za pritrditev zategovalnih trakov 24 ton, dvostopenjski dvižni mehanizem, upravljanje z ene strani, s pravim spodnjim delom, brez kompenzacije potiska Prostokotni pritrdilni oporni profil oziroma prosti radij gibanja nazaj približno 1920 mm 2 podložna klina z držalom Stranski odbijač iz aluminija Spodnji odbijač iz jekla Delni blatniki spredaj in zadaj za vsako osjo 1 nosilec za rezervno kolo za 1 gumo, s pritrdilnim kompletom za kolo 1 plastična orodjarna škatla, z vložkom, š=620/v=360/g=440 mm, zaklenljiva z vložkom (ključavnica ni vključena v dobavo) *Osi + vzmetenje* Bobnaste zavore, izbira proizvajalca Laserjsko merjenje osi/podvozja, zmanjšanje obrabe pnevmatik in porabe goriva Zračno vzmetenje *Zavorni sistem* Dvodelni zračni zavorni sistem, barvno označene cevi za lažje servisiranje Zavora s pomnilnikom vzmetne energije Duomatic priključek spredaj, brez povezovalnega kabla EBS, elektronski zavorni sistem z vtičnico EBS spredaj, brez povezovalnega kabla Lrsdokv Uvzepfx Ab Dst Pozor: priklopno vozilo lahko vlečejo samo vlečna vozila, ki zagotavljajo učinkovitost ABS! z ventilom za dvig in spuščanje Sistem za stabilnost vozila med vožnjo *Kolesa in pnevmatike* 235/75 R17,5, izbira proizvajalca Jeklena platišča, tovarniška srebrna barva *Elektrika* 24 voltov, večkamrne luči, stranska rumena LED osvetlitev 2 beli pozicijski svetili spredaj 2 bela/rdeča stranska gabaritna svetila zadaj 1 x 15-polna vtičnica spredaj, brez povezovalnega kabla *Pod* Plasti iz sitotiska, debeline približno 30 mm, za visoko točkovno nosilnost, za obremenitev osi viličarja do največ 5600 kg Prednja stena / nosilci v kotih spredaj 25 mm aluminijast votel profil, približno 1350 mm visok, nosilci v kotih iz jekla v volumenski izvedbi *Država registracije/nalepke* Nemčija z odobritvijo in poročilom Dekra (v skladu z §13 EG - FGV) 24-urna servisna telefonska številka pripravljeno za pritrditev registrske tablice v eni vrstici Obrobna označba z odsevnim trakom v skladu z ECE R 048, stranska bela in zadnja rdeča *Lakiranje* Okvir vroče pocinkan ali lakiran po želji stranke Prednja stena iz aluminija