Nizkopodnožni polpriklopnik nakup rabljenega (446)

Stanje: rabljeno, lastna masa: 17.450 kg, največja dovoljena obremenitev: 68.650 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2024, dolžina tovornega prostora: 9.400 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 850 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Leto izdelave: 2024, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading deck length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° Loading Deck: - Sliding loading deck with Super-Grip rubber covering over the axles, approx. 9,400 mm long with rear bevel approx. 500 mm x 10° - One recess in the deck and extended into the bevel to accommodate the excavator’s stick, approx. 3950 x 780 x 370/450 mm - Pneumatic locking system with conical locking bolt and reinforced locking positions Axles and Tyres: - TWINAXLE II type half-axles, independent wheel suspension, 1st axle self-steered, all other axles hydro-mechanically forced steered Bsdpfxet Dpiyo Abmedk - 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually - Technical axle load: 12,000 kg - Hydraulic axle compensation - Hydraulic cylinders with shut-off valves - Tyres: 245/70 R 17.5 3PMSF twin tyres Two-part Steel Ramps: - One pair of two-part steel ramps, approx. 4,650 mm long and approx. 900 mm wide - With Super-Grip rubber covering - Hydraulic foldable ramp tips - Ramps can be hydraulically adjusted approx. 235 mm outwards and approx. 215 mm inwards separately Full Metallization: - Complete HRM metallization (High Resistance Metallisation) - Entire steel construction shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%) Accessories: - Plug-in steel front wall, approx. 400 mm high - 1 one-piece stainless steel toolbox, approx. 2,480 x 340 x 390 mm - Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) - 3 kW electro-hydraulic unit for hydraulic operations (except hydraulic winches) - 1 spare wheel - On the gooseneck, 1 pair of plug-in aluminium side boards, approx. 400 mm high, anodised - On the gooseneck, 1 plug-in aluminium rear board, approx. 400 mm high, anodised - Approx. 40 mm hardwood covering on the gooseneck, checker plate covering over the king pin - Gooseneck guide plate for fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing legs with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - On the loading deck, approx. 50 mm hardwood covering, checker plate over axles - Loading deck locking with conically welded locking profiles every 250 mm, incl. pre-load plate - 1 sliding intermediate table, approx. 300 mm wide - Extendable deck wideners, approx. 230 mm per side - 1 pair of hydraulic rear outriggers - Central lubrication system - Wired remote control via push buttons, with axle tracking control - Radio remote control - "Super Grip" 25 mm rubber floor and steel plate floor - Square climbing strips 20 x 30 mm - WABCO Smart Board system - Square climbing strips 20 x 30 mm, approx. every 200 mm on ramp outer frame - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 position lights and brackets for beacon

Stanje: rabljeno, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.500 kg, konfiguracija osi: 3 osi, prva registracija: 04/2022, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 12.400 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Vozilo / Nadgradnja: polpriklopnik z nizko posteljo in 2 paroma utorov za kolesa Skupna dolžina: 13.220 mm Dolžina nakladalne površine: skupaj 12.400 mm Širina: 2.550 mm Nakladalna višina: 900 mm Dodatne informacije - 2 para utorov za kolesa, odstranljivi in razširljivi - Dolg, globok izkop za roko bagra - Velik komplet za pritrjevanje (zatezni pasovi) - Dvigljiva os - Krmiljena sledilna os - BPW osi - ALTEC rampe s pomagalom vzmeti, odstranljive Bdjdpfxsxxxpxo Abmek - Pocinkano in barvano - Sprednja škatla za orodje - Razširitev za 3 m - Opozorilne table - Rotacijska opozorilna luč - Plezalne letve - Gumijasti premaz nakladalne površine - LED luči in LED vzvratna svetila - Galgenski nosilec za verige - Zadnja podpora Vozilo je na voljo takoj - ostali novi in rabljeni polpriklopniki z nizko posteljo so takoj na voljo iz zaloge.

Stanje: rabljeno, največja dovoljena obremenitev: 62.950 kg, skupna masa: 91.400 kg, konfiguracija osi: 3 osi, prva registracija: 12/1994, dolžina tovornega prostora: 18.910 mm, širina tovornega prostora: 2.730 mm, skupna širina: 2.750 mm, skupna višina: 3.300 mm, Oprema: ABS, 5-axle low-bed trailer, LANGENDORF DOLLY AXLE, detachable gooseneck, technically permissible gross weight approx. 103,500 kg, excavator deck: (LxW) 8,150 x 2,750 mm, raised deck (LxW) 7,360 x 2,730 mm, gooseneck: (LxWxH) 3,400 x 2,460 x 410 mm, ABS, BPW axle(s), all axles hydraulically forced-steered, electro-hydraulic auxiliary steering, drum brake system, air suspension. The vehicle may feature advertising decals and/or lettering. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide a quote through our partner workshops! The vehicle may feature advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. Bjdek Akcqspfx Abmodk We are happy to provide a financing or leasing offer for this item. Please contact us!

Stanje: rabljeno, največja dovoljena obremenitev: 51.900 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2020, naslednji pregled (TÜV): 11/2026, Oprema: ABS, * FAYMONVILLE F-S44-1BBY Multimax – Telescopic Low Loader with Wheel Wells, 4 Axles * First Registration: 11/2020 Bdjdpfsxv Nhaox Abmok * Gross Weight: 65 t (registered in Germany for 57 t), Payload: 51.9 t * Gigant Axles, air suspension, front lift axle, last 2 axles steering * 235/75R 17.5 (7/7-6/6, 13/13-13/13 mm, 5/5-8/8 mm, 6/5-7/8 mm, spare wheel 6 mm) * Total length: 12.8–16.9 m * Load area approx. 8.80 m, telescopically extendable in several stages up to 12.90 m + approx. 1 m sloped section at the front + gooseneck 2.30 m * Total extension 4.10 to 4.40 m * Width 2.53 m + extensions up to 3 m, warning sign * 2 pairs of wheel wells * Mounting bracket for rotating beacon at the rear with socket, also lateral * 8 heavy-duty lashing points on the load area * 9 pairs of heavy-duty lashing points laterally * LED headlights and LED taillights * Electro-hydraulic ramps, 24 V, 2.80 m long, hydraulically retractable * Front storage box ----* We’re happy to take your old vehicle in trade! * Lease purchase possible * Export/export license plates, temporary license plates as well as export declarations possible ----Our opening hours * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside of business hours we are available by appointment

Stanje: rabljeno, največja dovoljena obremenitev: 38.020 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2022, dolžina tovornega prostora: 19.450 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 810 mm, skupna širina: 255 mm, skupna višina: 1.950 mm, Oprema: ABS, Kel-Berg E50S4 Polpriklopnik z nizkim ležiščem Prva registracija: 15-06-2022 SAF osi 2x vodeni zadnji osi Bobnaste zavore z ABS in EBS Pnevmatike: 205/65 R17,5 35/40% Zračno vzmetenje Skupna masa: 50.000 kg, lastna masa: 11.920 kg, nosilnost: 38.080 kg Dolžina labodjega vratu: 4,30 m Dolžina nizkega poda: 8,85 m + 6,30 m teleskopsko Skupna dolžina nizkega poda: 15,15 m Širina: 2,55 m Višina nakladalne površine: 81 cm 2 zadnji oporni nogi Privezne ušesce Bsdpfx Aoxwf U Eobmedk Vstave za kole Pridržujemo si pravico do napak, tipkarskih napak in vmesne prodaje.

Stanje: rabljeno, lastna masa: 5.780 kg, največja dovoljena obremenitev: 20.920 kg, skupna masa: 26.700 kg, konfiguracija osi: 2 osi, prva registracija: 06/2011, naslednji pregled (TÜV): 06/2024, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 3.200 mm, vzmetenje: zrak, medosna razdalja: 1.300 mm, Leto izdelave: 2011, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, * German semi-trailer * Single ownership * Special low-loader trailer from premium manufacturer Meusburger * Type MPG - 2 * Body with sliding roof device * Enables side loading * Loading possible from the top and rear as well * Ideal for transporting heavy goods, equipment, construction machinery, vehicles, etc. * Payload: 21t * 3 x 4.2t capacity Altec loading ramps * Ramp compartment * Sliding tarpaulin left and right with Edscha sliding roof * Platform dimensions: 7.20 m x 2.50 m x 3.20 m * Loading height: 0.80 m * Front platform loading height: 1.60 m * Length: 3.30 m x 2.50 m x 2.35 m * Wooden loading floor with DIN lashing rings * Aluminium portal doors * BPW eco plus axles * Air suspension with lifting/lowering function * 2 x extendable toolboxes * ABS/EBS * Gross vehicle weight: 26,700 kg * Curb weight: 5,780 kg * Payload: 20,920 kg * King pin to front dimension: 1.45 m * King pin to front diagonal: 1.75 m * King pin to rear dimension: 9.35 m If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. Bedpjrkn R Tofx Abmedk More trucks can be found on our website at We speak the following languages: German, English, Polish, Turkish Notice: We recommend and strongly advise an inspection and examination of the goods to avoid any misunderstandings regarding condition and suitability on the buyer's side. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stanje: novo, lastna masa: 12.800 kg, največja dovoljena obremenitev: 36.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 12.800 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimised loading platform length, approx. 3,750 mm in length - Gooseneck can be raised/lowered hydraulically and is detachable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading platform: - Low-bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear running gear: - Rear running gear with closed outer frame featuring checker plate cover and continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear Axles, suspension and tyres: - “PENDLE-AXLE”, all axles force-steered hydro-mechanically - Hose rupture valves on axle equalising cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position - Final coat for axles with two layers of 2K acrylic paint, single-colour in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 245/70 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 14 - TPMS sensors installed in all wheels, incl. spare wheels Included accessories: - Plug-in steel front wall, approx. 400 mm high - 3 kW electro-hydraulic unit for hydraulic operations, except for hydraulic winches Bodpfxovy Edce Abmedk - One spare wheel with mounting adapter - External beams of the gooseneck with mounting holes for bolt-on lashing rings - Plug-in ALU side walls on the gooseneck, approx. 400 mm high, anodised - One plug-in ALU rear wall on the gooseneck, approx. 400 mm high, anodised - Checker plate covering on the gooseneck - Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area lighting at the gooseneck with on/off switch - Hydraulic traverse to support the gooseneck on the tractor or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - The rear upper area of the gooseneck is closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and retaining bolts for bridging the low-bed mounting hooks - The ramps can be placed over or between the hooks - Mounting option for steel drive-on ramps at the rear between the external beams of the gooseneck - Prepared for bolt-on container locks for 1 x 20ft on the external beams - Mechanical pin and lug coupling from low-bed to running gear for exchanging the loading platform or inserting extension beams - With electro-pneumatic-hydraulic couplings - The outer beams of the low-bed are coated with painted-on sand layer as anti-slip protection - Removable (galvanised) load floor, can be inserted in 3 elements between the external beams, with hardwood surface - Foldable extensions, approx. 230 mm per side - Hanging strip at the front of the rear running gear to the low-bed for loose approach ramps - 2 pairs of stake pockets recessed into the outer frame of the running gear, for plug-in stakes approx. 100 x 50 mm - Hanging strip for loose ALU approach ramps at the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 extendable warning signs, approx. 423 mm x 423 mm - Numerous lashing positions

Stanje: novo, največja dovoljena obremenitev: 48.180 kg, skupna masa: 70.700 kg, konfiguracija osi: 3 osi, skupna širina: 2.750 mm, Oprema: ABS, You can find our entire vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Complete specifications available on request. GOOSENECK * Gooseneck with integrated 1-axle running gear (pendulum axle) in a detachable design * Gooseneck hydraulically adjustable in height, including hydraulic connection linked to the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with front taper approx. 60° * For tractor units: 6 x 4 or 8 x 4 * Front bulkhead made of steel, detachable, approx. 400 mm high, tapered design * 1 pair of mechanical supports at the front of the gooseneck, foldable (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized version * 1 plug-in aluminum rear board, approx. 400 mm high, anodized version * Checker plate covering over the gooseneck * 3.5 inch king pin * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * 1 stainless steel toolbox with 1 lid, mounted on the right side in direction of travel near the aluminium board, approx. 1,350 x 400 x 400 mm (L x W x H) * Hydraulic couplings from gooseneck to low bed with multi-coupling * 1 LED work light left and right at the rear cross member of the gooseneck, wired to the connection panel for the tractor unit LOADING AREA * Low-bed with external beams, designed as a telescopic loading area in low construction with front extension, including fixed approx. 50 mm thick hardwood floor, length x width approx. 8,000 mm x 2,740 mm * One locking position approx. every 1,000 mm on the extension * Fixed drive-on wedges at the front of the loading area with climbing strips * 1 lashing ring outside on the fixed drive-on wedges (LC 10,000 daN) * 1 hanging lashing ring each left and right on the front crossmember (LC 10,000 daN) * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm on the inner beams of the low bed * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm on the outer beams of the low bed (LC 10,000 daN) * Cut-outs above the lashing rings on the top chord of the outer beams * Mechanical bolt-flange coupling from low bed to chassis, for exchanging the loading platform or adding extension beams, with electro-pneumatic-hydraulic couplings * Outer beams of the low bed feature a painted-on sand layer as anti-slip protection * 4 pairs of recessed lashing rings flush in the loading area, distributed along the outer frame/outer beams (LC 10,000 daN) * 1 lashing ring outside each left and right on the rear crossmember (LC 10,000 daN) * Folding extensions, approx. 230 mm per side * Loose extension planks, framed in steel * 6 pairs of threaded blocks between the lashing rings under the top chord of the outer beam, for mounting boltable rings M24 (LC 8,000 daN) Bdedpfx Aewx Ddwobmok * 2 pairs of M24 bolt rings (LC 8,000 daN) included REAR RUNNING GEAR * Rear chassis with closed outer frame, checker plate covering and continuous prism excavator recess, approx. 1,450 x 900 x 505 mm, open at the rear PENDULUM AXLE * All axles are hydro-mechanically force-steered * Hose burst valve on the axle compensation cylinders with automatic reset function * Hydraulic cylinders with shut-off valves and safety pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in DB 7350 Nova Grey * Hydraulic axle compensation * Tyres 245/70 R 17.5 3PMSF * Hanging bar for loose loading ramps at the

Stanje: rabljeno, največja dovoljena obremenitev: 24.590 kg, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2010, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 700 mm, skupna širina: 2.550 mm, skupna višina: 2.750 mm, Oprema: ABS, ABS, EBS, BPW EcoPlus axle(s), last axle steered, TRIDEC steering, disc brake system, air suspension with raise/lower function, lift axle, phenolic plywood floor, 6 x stake pocket rails centrally on the loading area, continuous lashing holes in the outer frame, 2x storage boxes, vehicle may be covered with advertising stickers and/or lettering. Our offer does not generally include new TÜV certification. If a new TÜV inspection is required, we are happy to provide a quote through our partner workshops! Vehicle may be covered with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. Bdjdpfxsnmz Emo Abmok We are happy to offer you a financing or leasing proposal for this item. Please contact us!

Stanje: novo, največja dovoljena obremenitev: 86.300 kg, skupna masa: 110.000 kg, konfiguracija osi: 3 osi, with BPW axles 12 t, hydraulic suspension, hydromechanical forced steering, single-extendable loading platform type, with 2-piece access ramps Unladen weight: 23,700 kg Payload: 86,300 kg Length: 15,620 – 24,920 mm STZ-L Gooseneck - Front corners chamfered at 45° (468 x 468 mm), closed outer frame - Robust steel and welded construction - Designed loading platform 3,700 x 2,480 mm - Hydromechanical forced steering (dual circuit steering) in flat-bed design (overall height 235 mm) with adjustable guide elements Bodpfx Ajwcy Adjbmsdk - Ball bearing turntable mounting plate with interchangeable 3.5" king pin and adjustable steering wedge - Fifth wheel load: 26,000 kg - Maximum steering radius: 2,800 mm - Comfort storage box Loading Platform - Design: "single telescopic platform" - Traffidecko polymer rubber covering - Loading area single-extendable, executed as an outer-inner tube construction - Locking of extension stages via spring-loaded cylinders and locking pins - Fixed front bearing 700 mm length - Intermediate table 300 mm Chassis - 7-axle chassis with hydraulic suspension, axle spacing 1,510 mm - BPW axle assembly, consisting of one non-steered axle and six hydromechanically forced steered axle units with a maximum steering angle of 45° - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Ride height: 890 mm +170 mm/-90 mm - Chassis with open outer frame Vehicle Rear End - Design: "chamfered 500 mm" - 2 integrated drop leg supports for stabilizing the vehicle rear during loading operations 2-piece access ramps with Super Grip surface, 50,000 kg - 2,600 + 1,200 x 720 mm - Hydraulic lifting unit with hand pump, cable actuation - Hydraulic ramp adjustment Brake System - Dual line full air braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABV brake system - Hydraulic connection - easyControl - Aluminum sideboards, three-sided - Lift function for 2 axles - Central lubrication system "BEKA-MAX" - Electric power unit - Extending width adjusters incl. infill boards, width extendable telescopically to 3,390 mm Technical Data Gooseneck Loading platform (L x W): 3,700 x 2,480 mm Chamfer: 1,080 mm Build height above fifth-wheel: 235 mm Fifth-wheel height (laden): 1,300 mm Steering clearance rear: 2,800 mm Steering clearance front: 1,300 mm King pin: 3.5" Loading Platform Loading platform (L x W): 12,500 x 2,750 mm Telescopically extendable by 9,300 mm Incrementally up to (L x W): 21,800 x 2,750 mm Width extendable up to 3,390 mm Rear chamfer included: 500 mm Loading height (laden): approx. 890 mm Chassis Axle spacing: 6 x 1,510 mm Rear overhang: 1,100 mm Steering 1st axle non-steered 2nd – 7th axles hydromechanically forced steered (dual-circuit steering)

Stanje: rabljeno, največja dovoljena obremenitev: 36.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2003, dolžina tovornega prostora: 12.040 mm, Oprema: ABS, id: 334243 ZVEDACÍ NÁPRAVA, RAIDY Pro více informací volejte: , Pro více informací prosím volejte: +420 734 511 212 Bjdpfx Aew Erw Sobmsdk

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° Bjdsk Af Svjpfx Abmjdk - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Load platform: - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit - Loose widening planks in reinforced steel U-frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stanje: novo, največja dovoljena obremenitev: 73.090 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You will find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Below is an excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable * Length approx. 3,650 mm. Suitable for tractor units: 6x4 or 8x4 2-axle compact front bogie: * Hook mounts at front and rear. Length: approx. 2,200 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design, with fixed hardwood flooring, approx. 50 mm thick * Drive-over bridge hooks at the front and bolt/lug coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 7,150 mm * Beam height: approx. 300 mm * Beam width: approx. 650 mm * Loading height approx. 450 mm with ground clearance of approx. 150 mm 4-axle rear bogie: Bdodpfxoxbv Aus Abmek * Mechanical pin/lug coupling for attaching a lowbed at the front * End crossmember at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm 2-axle front bogie: * Pendulum axles, all axles hydro-mechanically steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position * Final painting of axles with two layers of 2K paint, single color in MB7350 Novagrau * Technical axle load: approx. 14,640 kg (62 km/h) * Hydraulic axle compensation 4-axle rear bogie: * Pendulum axles, all axles hydro-mechanically steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-locking pins for securing in raised position * Final painting of axles with two layers of 2K paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg (62 km/h) * Hydraulic axle compensation Tyres: * Tyres as per manufacturer's choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Entire steel structure automatically shot-blasted after welding process * Second abrasive blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) * Final coating with 2 layers of 2K top coat, single color in RAL 3002 Carmine Red according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Removable ALU side and rear walls for gooseneck, approx. 400 mm high * 3.5 inch king pin * Truck hydraulics connection with flow regulator (20 l/min), including gallows for hose suspension * Tank on tractor unit (SZM) must be at least 80 liters * With MAX Trailer coupling units, otherwise couplings to be supplied free issue by customer * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Multi-coupling hydraulic connectors on gooseneck * Front bogie with separate air connection for pneumatic screwdrivers * BEKA-MAX central lubrication for one 2-axle bogie with standard grease NLGI-2 * Preparation for mounting bolt-on container positions for 1 x 20' or 1 x 30' on the outer beams * Without container locks * Mounting points on the outer beams of the loading platform for foldable extensions * BEKA-MAX central lubrication for one 4-axle bogie with standard grease NLGI-2 * Socket on rear bogie for connection of cable remote control for trailing steering * Rear bogie with trough * One LED beacon with bracket left and right on the rear crossmember

Stanje: rabljeno, največja dovoljena obremenitev: 18.000 kg, skupna masa: 24.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/1987, dolžina tovornega prostora: 12.340 mm, širina tovornega prostora: 2.620 mm, skupna širina: 2.750 mm, skupna višina: 1.450 mm, Tiefbett : Gesamtlänge - 8.530 mm, Länge bis 1. Achse - 4.360 mm, Ladehöhe - 690 mm, Länge über den beiden Achsen - 1800 mm, Ladehöhe: 900 mm, Länge hinter den Achsen - 2.130 mm, Auffahrhöhe - 830 mm, vordere Schräge 240 mm, Breite: 2.620 mm, Schwanenhals: 3.900 mm, Aufsattelhöhe 1.180 mm, Entfernung Königszapfen nach vorne: 1.150 mm, Alu-Auffahrrampen (LxB) 2.880 x 500 mm, 4 x teški vezni prstenovi po strani, JOST potporni vijci, SAF osovina(e), bubanj kočioni sistem, lisnate opruge, Vozilo može biti oblepljeno ili ispisano reklamom. Naša ponuda generalno ne uključuje novi tehnički pregled (TÜV). Ako želite novi TÜV, rado ćemo Vam ponuditi usluge naših partnerskih radionica! Vozilo može biti oblepljeno ili ispisano reklamom. Primjenjuju se naši opšti uslovi isporuke i plaćanja. Rado ćemo Vam napraviti ponudu za finansiranje ili leasing ovog objekta. Molimo kontaktirajte nas! Bdedpfxjv T E Izj Abmek

Stanje: novo, največja dovoljena obremenitev: 61.800 kg, skupna masa: 76.000 kg, konfiguracija osi: 3 osi, Dimension B 11,970 mm Unladen weight 11,200 kg with air suspension, hydromechanical forced steering, single telescopic loading platform, with drive-on ramps STZ-L Gooseneck - Robust steel welded construction - Formed loading area 3,700 x 2,480 mm - Beveled edge - Hydromechanical forced steering (dual-circuit steering system) in low-profile design (overall height 235 mm) with adjustable guide elements - Ball bearing turntable-mounted fifth wheel with replaceable 2” kingpin and adjustable steering wedge - Mechanical landing gear Loading Platform - Single telescoping, designed as an outer-inner tube construction with a 700 mm fixed loading area section at the front - Stage locking by means of spring-actuated cylinders Running Gear - 5-axle, air-suspended chassis - BPW (Eco) axle assembly, consisting of a steerable leading axle and three hydromechanically forced-steered stub axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lifting and lowering valve for lowering to a minimum of 790 mm or raising to a maximum of 1,000 mm - 1 lift axle Vehicle Rear - Straight design with climbing strips - Short 1,260 mm rear overhang from the center of the last axle - Hydraulic rear support Drive-On Ramps - Two-part drive-on ramps, length 2,750 mm / 1,550 mm, width 800 mm - Max. load capacity per ramp pair 50,000 kg - Hydraulic ramp adjustment - Ramp length in transport position from rear vehicle edge: 300 mm Brake System - Dual-line all-wheel compressed air brake system with diaphragm cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-actuated cylinders - Anti-lock braking system (ABS) Special Equipment - Extendable widenings - Central lubrication system “BekaMax” - All available lashing rings installed - Electro-hydraulic unit with radio remote control - (Load-dependent) lifting function for 1st axle Technical Data Gooseneck Loading area (L x W): 3,700 x 2,480 mm Overall height above fifth wheel coupling: 235 mm Fifth wheel height laden: 1,250 mm Loading Platform Loading area (L x W): 9,300 x 2,550 mm Telescopable by 4,465 mm Loading height laden: 855 mm (+140 / -60 mm) 2nd driving position: 895 mm (+/-100 mm) Steering 1st axle: steerable, liftable 3rd to 5th axles: hydromechanically forced-steered (dual-circuit steering system) Bjdpfx Abswcy Rzomsdk

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 39.400 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, obratovalna teža: 10.600 kg, Oprema: ABS, Gooseneck: - Gooseneck with 30 mm hardwood flooring - Gooseneck at rear in straight version - 3 pairs of lashing rings (LC 5,000 daN) Extendable load floor: - Load floor in extendable configuration - 5 pairs of lashing rings foldable outward - 3 pairs of lashing rings foldable outward - 1 pair of lashing rings laying at the front end of the load floor - Cut-outs in the outer frame of the load floor for attaching tension straps - Approx. 48 mm hardwood flooring, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid axles, two self-steering axles - Air suspension with drum brakes, with lift/lower function - The self-steering axles are equipped with an electromagnetically operated reverse lock, which can be activated via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel construction made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, lighting 24 Volt, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - High-quality and durable corrosion protection on the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-colour 2-component (2K) top coat in Novagrau - Rear section metallised and painted in RAL 9010 (Pure White) Bdodjt Ag Uwspfx Abmsk Included accessories: - One spare wheel with holder in front of the bulkhead - 2" king pin - Galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised connection bar at the front - 4 wheel chocks with holder at the front wall - Galvanised folding supports under the load floor slope - Holder for a warning beacon at the rear of the trailer - Galvanised extensions, extendable by approx. 230 mm per side - White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - European reflective markings (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in ALU side walls and rear wall, approx. 2,440 x 400 mm - The rear, galvanised plug-in side stanchions are removable, length of the body approx. 2,560 mm - 7 pairs of WADER container pockets - 1x 20ft container on the load floor; 1x 40ft container on the load floor; 1x 40ft container above the gooseneck; 2x 20ft container - 7 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm in the outer frame of the load floor - Lift axle on the front axle with control via TEBS E, depending on the current axle load and load condition - Sliding plug-in rail for ALU loading ramps at the rear of the vehicle - Anti-slip sand finish painted on the checker plates on the gooseneck and load floor - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, each with a position lamp - Holder for warning beacon on the warning boards - 80 km/h speed stickers at the rear and on both sides - Axle load gauge for determination of axle loads inclu

Stanje: rabljeno, največja dovoljena obremenitev: 51.556 kg, skupna masa: 66.200 kg, konfiguracija osi: 3 osi, prva registracija: 06/2000, dolžina tovornega prostora: 14.670 mm, širina tovornega prostora: 2.980 mm, skupna širina: 3.000 mm, skupna višina: 3.200 mm, Nizka postelja 10.350 mm, nakladalna višina: cca 900 mm, labodji vrat: 3000 mm, sprednji naklon 440 mm, zadnji naklon: 880 mm, hidravlična nakladalna rampa (DxŠ) 4100x1220 mm, deljena, 7 pritrdilnih obročev na vsaki strani, zaboj za orodje na labodjem vratu, podporni vitel, izvlečne opozorilne table, rotacijska luč, 3. in 4. os hidravlično prisilno krmiljeni, bobnasta zavorna naprava, zračno vzmetenje, vozilo je lahko polepljeno z oglaševanjem in/ali označeno. Naša ponudba je praviloma brez nove tehnične preizkusa (TÜV). V primeru, da želite nov tehnični preizkus, vam z veseljem ponudimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno z oglaševanjem in/ali označeno. Veljajo naši splošni pogoji dobave in plačila. Za ta predmet vam z veseljem pripravimo ponudbo financiranja ali leasinga. Kontaktirajte nas! Bdedpfxoxrxkie Abmjk

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Braking system by WABCO EBS-E according to EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Entire steel structure automatically blast cleaned with shot blasting after welding Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rims in silver-grey Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm Bdodpfsmfqi Iox Abmjk One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed 1 movable intermediate table for the extension tube with large cross-section Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring

Stanje: rabljeno, največja dovoljena obremenitev: 75.950 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/1984, dolžina tovornega prostora: 14.770 mm, širina tovornega prostora: 2.740 mm, skupna širina: 2.750 mm, skupna višina: 2.500 mm, SCHEUERLE heavy-duty low-bed trailer combination, gooseneck + 3-axle chassis, serial number: 6573, plus K 60/4 chassis, serial number: 6576. Gooseneck hydraulically adjustable (LxWxH) 3470x2445x300 mm. Separate HATZ diesel engine, hydraulic lifting and lowering of the load platform (LxW) 11300x2470 mm. Eight tires per axle, tires in very good condition. Steered pendulum axles. Payload – technically permissible axle loads at reduced speeds: gross weight approx. 133 t or 147 t. Good overall condition. The vehicle may be fitted with advertising decals or lettering. Our offer generally does not include a new TÜV (roadworthiness) inspection. Should you require a new TÜV inspection, we would be happy to provide you with an offer from our partner workshops! The vehicle may be fitted with advertising decals or lettering. Our general terms and conditions of delivery and payment apply. Bdsdpfx Abet T Ikusmjk We would also be pleased to provide you with a financing or leasing offer for this item. Please feel free to contact us!

Stanje: novo, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 3PMSF, barva: siv, Oprema: ABS, Swan neck: - Swan neck with front corners beveled at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the load area (LC 10,000 daN) - Cut-outs in the external frame of the load area for attaching lashing straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, over the axles with checker plate covering Axles and Tires: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear or manually - Air suspension with lifting and lowering valve - Axle tools - 235/75 R 17.5 tires, 3PMSF Braking system: - WABCO braking system as per EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Accessories included: - One spare wheel with holder in front of the front wall - 2'' king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holder at the front wall - Rear light bracket at the rear of the trailer Bodpeuqlmnsfx Abmsdk - Mounting points at the rear area of the swan neck for ALU loading ramps - Galvanized folding supports under the chamfer of the load area - Cover plates to bridge the gap between ramps and load area - White reflective tape according to EU standards on the sides, red at the extension and rear - Electro-hydraulic unit at the rear, under the load area - Bracket for warning panels left and right on the swan neck and ramps, including power socket - Ramp control valves mounted on the right-hand side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the swan neck aluminum side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - 3 pairs of WADER container pockets in the load area for a 20ft, 30ft, or 40ft container - 6 pairs of stake pockets 100x50 mm in the external frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfered area of the load area - Anti-slip sand layer painted on the checker plate above the king pin and load area - Mounting for beacon on the warning panels - European reflective plates (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load chart - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel construction shot-blasted, then the defined visible surfaces finished hot-metallized with ZINACOR 850 (zinc 85% - aluminum 15%)

Stanje: rabljeno, največja dovoljena obremenitev: 69.800 kg, skupna masa: 97.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2014, skupna širina: 2.750 mm, skupna višina: 2.900 mm, Oprema: ABS, Special low-loader for long and heavy haulage, the low bed has a loading area of approx. 7,700 mm, plus 5,300 mm extendable, the low bed can be converted into a platform (length 15,305 mm, extendable up to 20,605 mm), the loading height as a low bed is approx. 420 mm, the loading height as a platform is approx. 800/900 mm, the low bed can be widened up to 3,200 mm, axles: DOLL Panther technology, double wishbone suspension with hydraulic springs, axle load 12,000 kg each, fifth-wheel load 25,000 kg, suitable for payloads up to approx. 80,000 kg at reduced speed only, dimensions without front DOLLY axles: length approx. 17,350 + 5,300 mm extendable, unladen weight approx. 21,600 kg, suitable for payloads up to approx. 69,650 kg at reduced speed only, current new price approx. 460,000 EUR net. Bsdpovzi Axofx Abmodk Our offer generally does not include a new TÜV inspection. Should a new TÜV inspection be required, we will be happy to provide you with a quote from our partner workshops! The vehicle may feature advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us!

Stanje: novo, lastna masa: 7.900 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, obratovalna teža: 7.900 kg, Oprema: ABS, Swan Neck: - Swan neck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood decking Loading Area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Recess in the chamfer and encroaching into the loading area for receiving the excavator bucket stick approx. 2,900 x 750 x 210/290 mm - Cut-outs in the external frame of the loading area for attaching tension straps - Hardwood decking approx. 48 mm thick, over the axles with tread plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle self-steering t- Technical axle load: 12,000 kg Bodpfx Abeunrapjmsdk - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - TPMS tyre pressure monitoring system compliant with ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure blasted automatically by wheel blast machine after welding - Second blasting with corundum for optimal adherence of the coating system - Final coating: two layers of 2K top coat, solid colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and coated in RAL 9010 (Pure White) - Cavity sealing with special wax Electrical System: - Electrical system according to EU standards, 24 volt ASPÖCK-NORDIK (ASS3) lighting - ASPÖCK-UNIBOX at front connection rail with sockets 2x 7-pin & 1x 15-pin Included Accessories: - Multiple lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on galvanized front connection rail - 4 wheel chocks with holders mounted on the front wall - Receiver at rear of swan neck for ALU loading ramps - Galvanised folding supports beneath rear chamfer of loading area - Bracket for beacon at rear of trailer - Galvanised extendable outriggers, extendable by approx. 230 mm per side - White reflector tape to EU spec at sides and rear, red at rear - Brackets for warning signs on left and right of swan neck and rear panel, including socket - ALU side boards and rear board on swan neck, removable, approx. 2,440 x 400 mm - Rear galvanised stake pockets are removable - 2 pairs WADER container pockets in loading area for 20ft container - 6 pairs stake pockets for removable stakes 100 x 50 mm in the outer frame - Adjustable hanging rail for ALU access ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area chamfer - Sand-finish anti-slip coating painted onto the tread plate on swan neck and loading area - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with position light - Bracket for beacon fitted to warning boards - 80 km/h speed sticker rear and on both sides - European reflective signs (Red-Yellow) at the rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then specified visible surfaces metallised with ZINACOR 850 (Zinc 85% - Alu 15%) hot-finished

Stanje: rabljeno, največja dovoljena obremenitev: 34.100 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2021, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 25.400 mm, višina nakladalnega prostora: 350 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Leto izdelave: 2021, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize the loading platform length, approx. length 3,785 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth-wheel load: 23,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low-bed with external beams in extendable “SUPER LOW” design, approx. length 6,850 mm - Low-bed with fixed hardwood flooring, thickness approx. 40 mm, and pneumatically operated locking system - Service lines protected within the extendable beams, automatically adjusting to the respective low-bed length - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD lashing rings Rear running gear: - Rear running gear with closed outer frame, checker plate covering, and continuous prism-shaped excavator trough approx. 1,250/700 x 505 mm, open at the rear Axles and Tyres: - Pendulum axle, all axles hydro-mechanically forced steered Bedpfxsrtqylo Abmsdk - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pin for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Axle tools - Tyres 245/70 R 17.5 Brake system: - Brake system in accordance with EU regulations with EBS-E, without connecting lines to the tractor unit Paintwork: - First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component zinc dust primer - Rear section metallized and painted in RAL 9010 Accessories included - Prepared for the installation of bolt-on container locks for 1x 20' or 1x 40' container on the outer beams - One galvanized steel front wall, approx. 400 mm high - On the galvanized connection strip at the front, yellow-red air couplings - 2 wheel chocks with holder on the front wall - Remote steering from the front and rear via cable remote control with pushbuttons, including single-track axle control - Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings - Electro-hydraulic unit - On the gooseneck and at the rear panel left and right, one bracket each for warning signs including power sockets - On the gooseneck, plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stanchions are removable - 5 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform, 2 pairs in the outer frame of the rear running gear - Folding extensions, approx. 230 mm per side - 1 pair of steel ramps for bridging the hooks of the low-bed - Speed decals 80 km/h on the rear and both sides - On the warning signs, bracket for revolving beacon - Wireless remote control for rear steering, in addition to cable remote, with LED indicators on the receiver for single-track axle control - Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable cover for the pump - Dipper stick recess on the rear running gear closed at the rear with a plug-in plate

Stanje: rabljeno, lastna masa: 13.600 kg, največja dovoljena obremenitev: 56.200 kg, skupna masa: 69.800 kg, konfiguracija osi: 3 osi, prva registracija: 11/2024, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS,

Stanje: rabljeno, lastna masa: 9.300 kg, največja dovoljena obremenitev: 32.700 kg, skupna masa: 42.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2025, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, skupna dolžina: 12.400 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, dvižna zadnja plošča, With every used semi-trailer, you receive a current and comprehensive inspection and function report. Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor, 30 mm thick Loading Area: - Extendable loading area with rear bevel approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flush-mounted lashing rings at the front of the loading area (LC 10,000 daN) - Cutouts in the outer frame of the loading area for the attachment of tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Axles and Tyres: - BPW axles, hydromechanically steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres: 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Coating: - Complete steel construction automatically shot-blasted with turbine shot-blasting system after welding - Secondary shot blasting with corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure optimal corrosion protection - Final coating with 2 layers of 2K topcoat, single color in Nova Grey - Paint system tested in salt spray test according to ISO 9227-NSS - Cavity sealing with special wax Included Accessories: - 2" king pin - One galvanized steel front wall approx. 400 mm high - At the galvanized connection rail front, yellow-red air couplings - 2 wheel chocks with holders - One spare wheel with holder - Electro-hydraulic power unit - Remote steering, controllable from front and rear via cable remote control with push buttons, including single-track control for the axles - Recess at the rear of the gooseneck for ALU loading ramps Bjdpfoxwb Nlox Abmodk - European reflective panels (red/yellow) at the rear of the trailer - White reflective tape according to EU regulations on the side and on the extension, red at rear - On the gooseneck and rear wall left and right, each a holder for warning signs including socket - Adjustable insertion rail for ALU loading ramps at the rear of the vehicle - Holder for a rotary beacon at the rear of the trailer - Galvanized folding supports under the loading area bevel - Central lubricating system BEKAMAX (Pico) with standard grease NLGI-2 - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear removable galvanized stanchions (structure length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading area for either a 20ft (30ft) or a 40ft container - 6 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area - Stainless steel tool box INOX 1,500 x 390 x 810 under the loading area on the right (direction of travel) - Square lashing rails 20 x 20 mm every 200 mm on the outer frame of the loading area bevel - Four extendable warning signs approx. 423 x 423 mm, extendable by 400 mm, with position light - Wireless remote control for remote steering, in addition to the cable remote, with indicator lights on the receiver for single-track control - Painted-on sand layer as anti-slip protection on the checker plates on the gooseneck and loading area - Load gauge for determining axle loads, including load chart