Müller Mitteltal T3 3 Achs Tieflader Mit Abs nakup rabljenega (47.007)

Stanje: rabljeno, lastna masa: 5.750 kg, največja dovoljena obremenitev: 24.250 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1993, vzmetenje: jeklo, velikost pnevmatike: 235/75R17,5 141/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 141/140J, velikost zadnje pnevmatike: 235/75R17,5 141/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, -- Pridržujemo si pravico do tiskarskih napak, napak in sprememb, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Ppodjzhk D Hjpfx Alxju

Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2010, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vehicle is being sold on behalf of the customer. Some wooden planks are damaged. Equipped with 17 pairs of lashing rings. Loading height approx. 900 mm. -- Subject to typographical errors, mistakes, and modifications. Sample images used. More data available at: !, More Details: ! Ppedpfx Alozhr Exjxou

Stanje: rabljeno, lastna masa: 7.340 kg, največja dovoljena obremenitev: 22.660 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2012, dolžina tovornega prostora: 9.200 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Dolžina nakladalne površine cca 9.200 mm, nakladalna višina cca 900 mm, 16 pritrdilnih obročev, vozilo se prodaja po naročilu, pridržujemo si pravico do tiskarskih napak, napak in sprememb, slike so vzorčne. Več podatkov na: !, More Details: ! Psdozgvbzepfx Alxspu

Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2010, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vehicle is being sold on behalf of the customer. Some wooden planks are damaged. Equipped with 17 pairs of lashing rings. Loading height approx. 900 mm. -- Subject to typographical errors, mistakes, and modifications. Sample images used. More data available at: !, More Details: ! Ppedpfx Alszf Iagjxsu

Stanje: rabljeno, lastna masa: 7.340 kg, največja dovoljena obremenitev: 22.660 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2012, dolžina tovornega prostora: 9.200 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Dolžina nakladalne površine cca 9.200 mm, nakladalna višina cca 900 mm, 16 pritrdilnih obročev, vozilo se prodaja po naročilu, pridržujemo si pravico do tiskarskih napak, napak in sprememb, slike so vzorčne. Več podatkov na: !, More Details: ! Ppsdpfjzfv I Sox Alxsu

Stanje: rabljeno, največja dovoljena obremenitev: 16.950 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2006, naslednji pregled (TÜV): 04/2026, Leto izdelave: 2006, * Müller Mitteltal T3 NG * Low-loader * Ramps * Twin tires * Permissible total weight: 24,000 kg * Unladen weight: 7,050 kg * Payload: 16,950 kg * Tyres: see pictures * BPW axles Ppedpfoyv Ug Dex Alxsu * Immediately available * Subject to prior sale and errors excepted Do you have any questions? Contact us for prompt advice – also available directly via WhatsApp: We offer: Net purchase for companies within the EU with VAT ID number as well as for customers from non-EU countries. Leasing and financing options. Handling of all customs formalities. Issuance of short-term and export license plates. Transport to the port. All prices listed on classified ad platforms are gross prices and already include the statutory VAT of 19%.

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle equalization ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via draw spring and turnbuckle ----Lighting / Electrics: * RDÜ tire pressure monitoring * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable rotating beacon * 15-pin power connector ----General Attachments: * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: closed plastic mudguards; Rear: straight galvanized steel skirts, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Four stake pockets per side (stakes not included), also suitable for lashing ----Load Securing (La-Si package consists of): * 2 lashing eyes (6.4 t) front left & right on main frame of the bogie platform * 6 pairs of UVV-certified lashing rings, foldable and lowerable, loadable in all directions, recessed into the outer frame * Corner load capacity 13.4 t, otherwise 10 t Ppsdsl Th I Aspfx Alxju ----Widening: * 6 pairs of mechanical fold-out outriggers for max. overall width of 3 meters (except at the sloped rear) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * 4-way valve block for retrofit hydraulic lateral ramp shift ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (including 860 mm drive-on slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Info: * Permissible gross weight technically up to 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle compensation ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle Ppodel Th Nnspfx Alxou ----Lighting / Electrics: * TPMS Tire Pressure Monitoring System * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable warning beacon * 15-pin power connector ----General Equipment: * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning panel kits front and rear * VA closed plastic mudguards in front and straight galvanized steel skirts at the rear, each with spray protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox in the turntable platform * Four stake pockets per side (stakes not included), also with lashing function ----Load Securing (La-Si package consisting of): * 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 6 pairs of UVV folding and retractable lashing rings, loadable in all directions and countersunk into the outer frame * 13.4 t at corners, 10 t otherwise ----Widening: * 6 pairs of manual folding outrigger arms for 3 m overall width (not on the sloped rear section) * Widening boards stowed in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way hydraulic control unit pre-installed for optional hydraulic side shift of ramps ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry incline) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Finish: * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex stock Egestorf

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-tonne Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering device ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck display via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing spotlights (switched via reverse gear) * LED lighting ----General fittings: * Aluminium air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection Ppodpfx Aox Nli Nelxou * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame bent at 45°, hole pattern for lashing equipment, lashing force per lashing point 2,000 kg at a spacing of 480 mm * Installation of 3,000 kg drop lashing brackets at approx. 600 mm spacing possible – each side is equipped with 12 pcs. 3,000 kg lashing brackets included in delivery * Each side has 5 pockets for 100 x 50 mm stake posts in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum supports: * 3 pcs. galvanised drum supports secured by container locks with side forklift pockets center/center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross-bracing * Permissible drum weight per cable support 6,000 kg * Without drive and drum brake * Support arm with clamping lock for securing drum shaft * Steel drum shaft 76 mm diameter, with centring and rotating ends * 2 locating rings * 2 centring cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for securing the drum against rotation and uncoiling by the customer ----Loading height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 tonnes GVW possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from week 51/2026

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option via EBS signal in the truck cabin – no installation required on the truck side * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting Ppedpfx Alsx Nlkaoxsu ----General Fittings: * Aluminum air reservoir * Stainless steel tool box, approx. 1,000 x 300 x 600 mm, mounted on the side * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, drilled for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – 12 pcs 3,000 kg lashing rings per side included * 5 pockets per side for pipe stakes (100 x 50 mm) in the outer frame (stakes not included) * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanized drum supports, secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with transverse brace * Maximum drum weight per support 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided drum securing against turning and unspooling ----Loading height: * Approx. 1,040 mm when loaded ----Coating: * Chassis, bogie, drawbar, outer frame, rear under-run protection hot-dip galvanized * Axles painted in a black shade

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar, 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring system with display capability in the truck dashboard via EBS signal - without truck-side installation - * 15-pin power connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Fittings: * Aluminium air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun guard ----Platform Bed: * Zurr-fix outer frame, 45° edged with hole pattern for lashing equipment, lashing force per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – as standard, each side fitted with 12 x 3,000 kg lashing rings * Each side with 5 sockets for stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic plywood floor ----Drum Supports: Ppsdsx Nlkgopfx Alxeu * 3 galvanised drum supports secured via container locks, with lateral forklift pockets, centre-to-centre 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clearance between support arms approx. 1,775 mm, with crossbeam * Maximum drum weight per cable drum support: 6,000 kg * Without drive and without drum brake * Support arm with locking device for securing drum shaft * 76 mm diameter steel drum shaft with centring and rotatable ends * 2 set collars * 2 centring cones made of polyamide * 4 x 3.2 t lashing eyes on support arms for customer-side securing of drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm loaded ----Coating: * Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 t GVW possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from approx. CW 51 / 2026

Stanje: rabljeno, največja dovoljena obremenitev: 18.050 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2010, širina tovornega prostora: 2.520 mm, Oprema: ABS, ? Vzmetne rampe ? Nosilec za rezervno kolo ? Na stran: 7 x pritrdilnih obročev Pjdpjy T Tvxefx Alxepu ? Na stran: 4 x žepki za stranice ? Vlečno oko 50 mm ? Nakladalna višina: pribl. 910 mm ? Bobnasta zavora ? ABS ? Listno vzmetenje ? EBS ? Dvojna kolesa Vse informacije brez garancije / Pridržujemo si pravico do predhodne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 38.230 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2026, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Müller-Mitteltal nizkopodna prikolica z vdolbinami za kolesa TS 3 RM ML 30,0, 2 višini nakladanja in rampe Psdpfx Ajy R Ipujlxspu * Povečanje vertikalne obremenitve sedla iz 12 t na 18 t vklj. Montiran sedelni zatič v: drugi poziciji sedelnega zatiča 2", sedelni zatič do vključno krivljenja 2.750 mm. Zadnji polmer zasuka ca. 2.400 mm v svetli odprtini (priporočamo prosti prostor min. 150 mm). Sprednji polmer zasuka 1.480 mm oz. 1.570 mm z rezervnim kolesom. Opomba: Dovolj prostora do vlečnega vozila mora zagotoviti stranka. * Izvlečni deli za vdolbine za kolesa spredaj in zadaj spodaj (205 mm globoko). 6 kos desk za vdolbine za kolesa z nosilcem kot ležišče v skladu s kodo 09.112 ALU-tlačni zračni rezervoar namesto jeklenega * Smartboard upravljalna omarica kot infotool nameščena na prikolici z tlačnimi senzorji za prikaz skupne obremenjenosti osi. Prikaz možen na upravljalni omarici ali v tovornjaku preko EBS-zračnega vzmetenja (odvisno od proizvajalca tovornjaka) * ?SP-kombi paket: Orodjarna z 45° vogali iz pocinkanega jekla, dodatno prašno lakirana v RAL 9006 bela aluminij, na sedlarski platformi B=2.480 x V=500 mm z zgornjim preklopnim pokrovom, stranskimi vrati in poševno. ALU stranske stene zložljive na sedlarsko platformo (500 mm visoko), ALU zadnja stena vstavna (150 mm visoko), notranje in zunanje ALU stranice lakirane v RAL 9006 bela aluminij. Vklj. zložljivi & snemljivi zadnji stebri, pocinkani (brez zaključnega premaza). Vključuje vijačeno sprednjo konstrukcijo. Dolžina sprednjega okvirja do krivljenja 3.935 mm Sprednji polmer zasuka, brez rezervnega kolesa z dimenzijo krivljenja 2.450 mm oz. 2.750 mm ca. 1.750 oz. ca. 1.480 mm * 2 kosa ležišč za fiksiranje kontejnerjev, vgrajeni v sprednji okvir * 3 ležišča pod sedlarsko platformo za shranjevanje izbirnih ALU ramp ali lesenih desk za prekrivanje vdolbin za kolesa * Zložljivo/izvlečno konzolo (pocinkana) in lesene deske za širitev vklj. (ne na zadnji poševnini), nosilec desk na sedlarski platformi (največja širina tovora največ 2.500 mm) * Druga LED pozicijska luč v opozorilnem paketu spredaj in zadaj (dvojna osvetlitev), le v povezavi z opozorilnim paketom * 2 LED vzvratni žarometi na zadnji strani prikolice, prižgana v vzvratni prestavi (primerno za 12 V in 24 V), največ 2 dodatna kosa dovoljena * 7-polna vtičnica na zadnji strani, vezana za razsvetljavo za prekomerno dolžino z zadnjo lučjo (58 R) in maso * Gumijasta prevleka na nakladalni rampi levo in desno (ca. 860 mm dolžine) 190 07644 gumijasti trakovi, na notranji deski enodelnih ramp * Popolnoma avtomatski centralni sistem mazanja s črpalko (24V), rezervoarjem za mast ter integriranim upravljanjem prikolice, brez priklopa ramp (pri krmiljenju: vključno s priklopom razdelilnika na sedlarsko platformo). Opomba: Možno izključno za vlečna vozila z 24V razsvetljavo! Vmesna prodaja in napake pridržane! Prodaja izključno po naših Splošnih pogojih poslovanja. Pomembno obvestilo – Pomembna informacija: Kljub natančnemu preverjanju vseh podrobnosti v naši ponudbi se lahko pojavijo napake, ki so posledica prenosa med različnimi platformami. Zato opozarjamo, da so vse informacije brez garancije in ne predstavljajo pravne zahteve. Pravno: Ta prodajni oglas ne predstavlja ponudbe v smislu §145 BGB, ampak informacijo za pripravo pogodbe. Tukaj navedeni podatki so brez garancije in ne predstavljajo zagotovljenih lastnosti.

Stanje: novo, največja dovoljena obremenitev: 16.750 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 21.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release system for spring-type brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lift and lower device ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Lighting / Electrics: * 15-pin power connector * LED lights, 12/24 V * RDÜ tire pressure monitoring system ----General Fittings: * Jost support winch at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Preparation at the front bulkhead and rear slope for retrofitting container locks for 20'' container transport * Version: 21 t gross vehicle weight with reinforced chassis and axles Podpfx Aeq Dyu Uslxjpu * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor, clamped version * Preparation at the front bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Split sidewalls made of trapezoidal-profiled steel sheet, foldable with folding stakes in the center * Steel rear wall, insertable between the ramps (bracket provided inside the front bulkhead when not in use) * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Profifix lashing rail in the longitudinal center axis for lashing up to LC 3000 daN * One 10 t lashing ring in each front and rear corner * Lashing package: two retractable 8 t lashing rings on each side, multiple holes for 1.2 t lashing options in the front and rear crossmember ----Ramps: * One-piece mechanical grid ramps with spring mechanism for single person operation, approx. 3,000 x 620 mm (can be closed down to 20 mm) * Rear drive-on slope approx. 860 mm (chassis) ----Loading Heights: * Unladen: approx. 940 mm * Laden: approx. 910 mm ----Wheelbase / Tyres: * 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Side panels painted in an RAL color of your choice (excluding special or metallic paints), can be changed until about 6 weeks before completion * Drawbar, front bulkhead, tailgate, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks and support winch painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and intermediate sale subject to confirmation * Sample photos ----Delivery Time: * Available from calendar week 29 / 2026

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes switched to the first axle via EBS (no installation required on the truck side) * Rear axle as self-steering axle with electro-pneumatic steering lock * Locking of the self-steering axle from the driver's cab for maneuvering purposes, controlled via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting/lowering device and Ride-to-Return valve ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at rear for extended length lighting * Side marker lights with indicator signal control * Tyre pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) ----General equipment: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connecting cables from truck to semi-trailer ----Low loader deck: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and front tool box made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminium side boards (in RAL colour of choice) on the sides of the fifth wheel platform, foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on fifth wheel platform to low bed approx. 700 mm long with tread plate covering and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and low bed platform with 60 mm clamped wooden planks * Tear plate above the axles * 9 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension planks available with closed storage compartment across the direction of travel under the loading floor) * 3 mounting shafts under the fifth wheel platform for storage of optional aluminium loading ramps or wooden planks for wheel well coverings ----Load securing (LaSi package): Fifth wheel platform: Pjdpjq Euakefx Alxspu * Perforated outer frame angled at 45° with hole pattern for lashing points (2 t lashing capacity per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings each side recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the drop, 1 x above the centre axle next to the longitudinal beam) Low loader platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 x beginning of the drop on the fifth wheel platform, 1 x beginning of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings each side (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frame of the wheel wells (2 on the front wheel well, 1 on the rear wheel well) ----Excavator arm recess: * Extended excavator arm recess from end of last fixed axle through to steering axle up to rear crossmember, continuous with

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW axles * Start assist for shunting purposes on the first axle, activated via EBS (without truck-side installation) * Last axle is a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for maneuvering purposes from the driver’s cab via EBS (without truck-side installation) Ppedpsykx Nkefx Alxsu ----Suspension: * Air suspension with lift and lowering function as well as RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lamps with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swing arm as a carrier for connecting lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Gooseneck platform with 45° chamfered front corners and front-mounted toolbox made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminum side boards (in desired RAL color) foldable and removable along the gooseneck platform * Rear wall, insertable, height 150 mm * Rear incline on the gooseneck platform to the low-bed approx. 700 mm long with checker plate covering and at the end a perforated strip for attaching aluminum approach ramps * Gooseneck platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Tread plate over axles * 9 mechanical extension panels to a total width of 3 m, not included in the rear incline (extension planks available with closed transverse stowage compartment under load floor) * Preparation for 3 storage recesses under the gooseneck platform for optional storage of aluminum approach ramps or planks for covering wheel recesses * Preparation for container locks on the swan neck ----Load Securing (LaSi Package): Gooseneck platform: * Perforated outer frame, 45° angled, with hole pattern for lashing devices (2 t lashing capacity per point with a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor per side (1 x on gooseneck platform, 1 x on longitudinal frame after the cranking, 1 x above middle axle next to longitudinal frame) Low-bed platform: * 3 x 13.4 t lashing rings per side at the outer frame (1 x start of gooseneck cranking, 1 x start of approach ramp, 1 x end of approach ramp) * 2 x 10 t lashing rings per side (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side screwed to outer frames of the wheel recesses (2 at front wheel recess, 1 at rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last rigid axle over the steering axle to the end cross member, continuous with internal reinforcing profile approx. W = 770 mm x T rear

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swivel supports at the rear of the chassis * Straight pressed steel fenders * Spare wheel holder under the chassis, right side ----Low Loader Deck: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board plug-in, 150 mm high * Rear slope on fifth wheel platform to low-bed approx. 700 mm long * Fifth wheel platform with 50 mm timber planks, low-bed deck with 60 mm timber planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to a total width of 3 meters (not on rear slope; extension planks available with storage on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings on each side, plus 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t lashing rings, pivotable and lowerable, recessed in the outer frame * 2 x 6.4 t lashing eyes per side, plus 1 lashing ring at the excavator arm rest * 2 x container locks directly after the neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm rest from end of last fixed axle over steering axle to end crossbeam, with internal reinforcements, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanical one-piece hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * Outer board on ramp made from 50 mm hardwood * Climbing strips on outer frame of ramp and on approach slope * Rubber matting on ramp and approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump performance in the truck between 40 l/min and 120 l/min) ----Loading Dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm Pedjy Ngzyspfx Alxopu * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Coating: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support legs, air tanks painted in a black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included with the offered vehicle ----Delivery time: * available from c

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle trailing steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift-and-lower function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder under the chassis on the right side ----Low Loader Deck: * Gooseneck platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the gooseneck, foldable and removable * Rear wall – 150 mm – fitted * Rear slope at the gooseneck platform to the low-bed approx. 700 mm long * Gooseneck platform with 50 mm timber planks, low-bed platform with 60 mm timber planks * Tread plate over the axles Podpfx Aljy Ngz Hsxepu ----Extensions: * 8 x mechanical fold-out extensions to 3 m total width, but not on the rear slope (extension planks present with storage on gooseneck platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the gooseneck platform: 2 x 6.3 t lashing rings each side and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform sides: 2 x 13.4 t lashing rings each, and 4 x 10 t swivel and lowerable lashing rings recessed in the outer frame * 2 x 6.4 t lashing eyes per side and rear 1 lashing ring in the excavator arm recess * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Arm Recess: * Excavator arm recess from end of last rigid axle, over steering axle to end crossmember, continuous, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading Ramps: * Mechanically one-piece hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer retrofit of hydraulic ramp shifting * The outer board of the ramp consists of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the drive-up slope * Rubber on the ramp and drive-up slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from 40 up to 120 l/min) ----Loading Dimensions: * Loading area, gooseneck platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm drive-up slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension brackets hot-dip galvanized * Axles, landing gears, air reservoirs painted in a black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may include features not part of the offered vehicle * Sample images ----Delivery time: * tba

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Moving-off aid for shunting, connected to the first axle via EBS (no installation required on the truck side) * Last axle as self-steering trailing axle with electro-pneumatic lock * Trailing axle lock for shunting purposes, activated from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator circuit * Tire pressure monitoring with display in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Landing gear at front, swing supports at rear of the chassis * Straight steel fenders * Spare wheel carrier in front of front wall crossmember (spare wheel not included) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connection lines from truck to trailer ----Low Loader Deck: Ppjdpfx Alsykx Nqoxeu * 2nd kingpin position * Saddled platform with 45° chamfered front corners and front toolbox made from galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high drop-down/removable aluminium sideboards (custom RAL color) on saddle platform * Removable 150 mm high rear wall * Rear inclined ramp of approx. 700 mm at the end of saddle platform to low-bed deck, fitted with checker plate and lashing bar for attaching aluminium approach ramps * Saddle platform with 50 mm tongued-and-grooved timber floor, low-bed platform with 60 mm tongued-and-grooved timber planks * Tread plate above axles * 9 x mechanical folding extensions to 3 m overall width, but not on rear ramp (extension planks included with lockable transverse storage compartment under load area) * Preparation for 3 ramp storage compartments under saddle platform for either aluminium ramps or timber planks for wheel trough covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated external frame, angled at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point, minimum spacing 480 mm) * 3 x 13.4 t recessed tie-down rings per side (1 on saddle platform, 1 on main longitudinal beams after the step, 1 above the center axle beside the beam) Low-bed Deck: * 3 x 13.4 t tie-down rings per side on outer frame (1 at the start of the gooseneck, 1 at the start of the rear ramp, 1 at the end of the ramp) * 2 x 10 t tie-down rings per side (1 between front wheel-well and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t tie-down rings per side, bolted to the outer frame of wheel wells (2 at front, 1 at rear wheel well) ----Digger Arm Rest: * Extended digger arm rest from end of last fixed axle over steering axle to end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D at rear

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for shunting via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 extra LED reversing lights * 7-pin socket at the rear for additional length lighting * Side marker lights with indicator activation * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) Ppjdpfx Aotpta Dslxeu ----General attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the headboard crossmember (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection cables from truck to semi-trailer ----Lowbed platform: * Second kingpin position * Fifth wheel platform with 45° bevelled front corners and front toolbox made of galvanised, powder-coated steel sheet, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * Side aluminium drop sides, 400 mm high (in RAL custom colour), foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on the saddle platform to the lowbed approx. 700 mm long with chequer plate covering and a perforated strip at the end for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tread plate over the axles * 9 x mechanical folding wideners to 3 m overall width, not in rear slope (widening planks available with sealed crosswise storage compartment under the loading area) * 3 mounting shafts under the saddle platform for the storage of either aluminium loading ramps or wooden planks for wheel well covering ----Load securing (LaSi-package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashings (2 t lashing capacity per tie-down point at a minimum spacing of 480 mm) * 3 x 13.4 t recessed lashing rings per side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal members after the cranking, 1 x above the central axle next to the longitudinal member) Lowbed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 x at the start of the cranked platform, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 t lashing rings per side (1 x between the front wheel well and 1st axle, 1 x between the 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear wheel well) ----Excavator arm rest: * Extended excavator arm rest from end of last rigid axle over steering axle to end crossmember, continuous with internal reinforcing profile approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * 2 x 6.4 t lashing rings per side in the exca

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical folding supports at rear * Plastic toolbox, approx. 650 x 350 x 320 mm, mounted on the right side of the chassis at the front * Bolted underrun protection * Plastic quarter mudguards * Net hooks positioned at the central locking locations and 2 on the front wall ----Chassis: * High-tensile steel chassis ----Tipping Platform: * Steel pallet-type three-way tipper body with continuous side walls, upper inside pipe reinforcement, no central stanchions; drop-down with drop side spring assistance * Bolt-on rear stanchions * Combination steel swing doors on the rear wall, 2-leaf, asymmetrically split, can swing and lock 270°, not drop-down, with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bolt at the rear and central locking; deactivation for auto rear wall function when tipping backwards with door open * 4 mm fine-grained steel floor plate * Rear mounting rails for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner, plus 4 x 3 t lashing rings on each side recessed into the external frame ----Ramps: * 1 pair of aluminium drive-on ramps, approx. 3,570 x 410 mm (load capacity: 10 t/pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment under the loading platform, integrated into the chassis for the ramps ----Tyres: * Tyres 285/70 R19.5 ----Painting: * Chassis, drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized * Axles, springs, air tanks and support winch painted black * Drop sides painted RAL 9010 pure white * Other RAL-coloured side wall painting available at extra cost ----Information: * Reinforced body with load securing certificate * Vehicle has a day registration (not previously in use) * Subject to errors and prior sale ----Delivery time: Ppjdpfx Ajl Th Htolxsu * Available immediately ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes Pedsl Th Duopfx Alxepu ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer set ----Drawbar / Flange eye: * Height-adjustable drawbar (300 mm adjustment range) with 40 mm flange eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General attachments: * Jost mechanical landing gear in front * Two mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm mounted on the right side at the front of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks located at the central locking mounting points as well as 2 hooks on the front wall ----Chassis: * Chassis fabricated from fine-grain steel ----Tipper body: * Steel pallet three-way tipper body with continuous side walls, upper sections internally reinforced with pipe, no central stanchions, drop-side design with tailgate spring lifters * Rear stanchions bolted * Combination steel wing doors at the rear, double-leaf, asymmetrically divided, can swing open and lock to 270°, not collapsible, fitted with additional pendulum frame for automatic tailgate opening during tipping operation; locking by galvanized rotary bar at the rear and central locking; deactivation for automatic tailgate function when tipping backward with open wing doors * 4 mm fine-grain steel floor plate * Rear mounting rails for loading ramps ----Load securing: * Each corner fitted with one 5 t lashing ring, each side fitted with four 3 t recessed lashing rings in the outer frame ----Ramps: * One pair of aluminum access ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired & tracked vehicles * Rear lockable storage compartment for ramps integrated underneath the load area in the chassis ----Tyres: * Tyres 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, and rear support legs hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted in a shade of black * Side wall paintwork in RAL 9010 pure white * Other RAL color tones for side walls available at extra cost ----Additional Information: * Reinforced body with load securing certificate * Vehicle comes with one-day registration (never used) * Subject to errors and prior sale ----Delivery time: Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 17.290 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2017, naslednji pregled (TÜV): 07/2026, dolžina tovornega prostora: 8.900 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, * ABS Ppjdpjyulu Ujfx Alxou * 5-komorni zadnje luči * Oranžna rotacijska luč * Duomatik zračni priključek * BPW-ECO osi ----Nadgradnja: nizkopodni priklopnik, pocinkan okvir (1900+7000mm)/nakladalna višina pribl. 900 mm, zadaj poševno znižano/pristopna višina pribl. 770 mm, jeklena/lesena tla, razširljiv na 3 m, hidravlične nakladalne rampe (pocinkane) s protidrsno prevleko, prav tako hidravlično pomične v stran, vpenjalni obroči Prodaja samo pravnim osebam. PRI IZVOZU JE PLAČILO MOŽNO LE NETO ZNESEK!!!!! VSE INFORMACIJE BREZ GARANCIJE VKLJUČNO Z OPREMO IN DODATKI. Osnova vseh prodajnih pogodb, računov, predračunov, naročil in prodajnih pogovorov so naši splošni pogoji poslovanja (glejte impressum).

Stanje: rabljeno, največja dovoljena obremenitev: 18.150 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, dolžina tovornega prostora: 8.300 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, * ABS * 5-komorne zadnje luči * Duomatik zračni priključek * Gigant osi * Zadnja podpora ----Nadgradnja: Nizkopodna prikolica (1800+6500mm)/Višina nalaganja cca 920mm, zadaj poševna/Višina ramp cca 770mm, jeklena/lesena tla, hidravlične nakladalne rampe (pocinkane), nosilnost 15.000 kg/rampa, pritrdilni obroči + pritrdilne točke Pedpfx Ajzaln Sslxspu Prodaja samo pravnim osebam. PRI IZVOZU JE POTREBNO PLAČATI SAMO NETO CENO!!!!! VSE INFORMACIJE SO BREZ JAMSTVA OPA. OPREMA + DODATKI. Osnova vseh kupoprodajnih pogodb, računov, predračunov, naročil, pogajanj so naši Splošni pogoji (glej impresum).

Stanje: rabljeno, številka stroja/vozila: GE11/142/2022, lastna masa: 6.350 kg, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2008, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, Zelo dobro ohranjeno vozilo iz prve roke Trosnažni nizkopodni priklopnik za prevoz Ppjdpfjn Aw Hksx Alxeu Nizkopodni priklopnik z nakladalno rampo Prevoz težkih tovorov Tip T3 Komakt 30,0 Dolžina 8500 mm Širina 2500 mm Zračno vzmetenje Neto cena za trgovino/izvoz – 15.990 € Pridržujemo si pravico do sprememb, vmesne prodaje in napak ===== Telefon2 Mobilni telefon =====