Fliegl Vts 400, Radmulden, Baggerstielmulde, Verbr. Auf nakup rabljenega (8.791)

Stanje: rabljeno, lastna masa: 9.980 kg, največja dovoljena obremenitev: 30.020 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2022, dolžina tovornega prostora: 10.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: siv, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 4-osno, SAF osi, vrtljiva plošča, zračno vzmetenje, ABS (protiblokirni sistem), možno razširitev na 3 m, pritrdilne ušice, dvodelne nakladalne rampe, hidravlične rampe, stranska aluminijasta zaščita proti vdoru, dvojne pnevmatike, kolesne vdolbine. Nadgradnja: 4-osna nizkopodna prikolica s kolesnimi vdolbinami, izrezom za bagerski izpust in hidravličnimi rampami. Skoraj novo! 4x 10 t SAF-os, bobnaste zavore, tehnična skupna masa 40000 kg, nakladalna dolžina zamika približno 2800 mm, nakladalna dolžina nizkopodne platforme približno 7400 mm, možnost razširitve na 3000 mm, 50 mm vlečna zanka, 1. par kolesnih vdolbin približno 1600 mm dolg, 2. par kolesnih vdolbin približno 600 mm dolg, dolžina ramp približno 3850 mm, rampe vroče cinkane, rampe hidravlično bočno pomične. Višina nakladanja v sprednjem kolesnem vdolbini približno 560 mm! Višina nakladanja v zadnjem kolesnem vdolbini približno 650 mm! Dodatki brez garancije, pridržujemo si pravico do sprememb, predhodne prodaje in napak! Nljdpezg Ev Uofx Aanoc

Stanje: novo, največja dovoljena obremenitev: 30.310 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Gross weight: 40,000 kg Payload: 30,310 kg Unladen weight: 9,690 kg Overall length: 12,000 mm Loading length: 10,000 mm Loading bed: 7,150 mm including 850 mm drive-on slope Loading height: 900 mm Nlodsnzlg Djpfx Aanjc 1st pair of wheel recesses after drop in the loading bed, length at bottom approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the loading bed, length at bottom 600 mm, 300 mm deep Extensions to 3,000 mm, warning boards, rotating beacon, comprehensive lashing package 5 pairs of stake pockets in the outer frame Excavator arm recess, 1,800 mm long, 150 mm deep Drawbar 50 mm Air suspension with raise/lower valve, separately operable BPW drum brakes Tyres: 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Ramps: 2,800 mm x 750 mm, hydraulically operated Hydraulic lateral displacement Hire purchase offer: term 48 months, residual value 40%, down payment only the VAT on the installments, monthly payment EUR 970.00 net Vehicle available from 11.09.2023 from the Neumünster trade fair. Visit us at Nordbau - Stand West 121, right next to the main entrance. Further 3-, 4- and 5-axle low loaders new and used available immediately

Stanje: novo, največja dovoljena obremenitev: 30.010 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with wheel recesses and split ramps, type VTS 400 RM Lease-purchase offer: Term 48 months, down payment only the VAT, residual value 40% Monthly rate: EUR 899.00 Vehicle / Body: Low-loader First registration: New vehicle Gross weight: 24,000 kg / 40,000 kg Unladen weight: 9,990 kg Payload: 14,010 kg / 30,010 kg Overall length: 12,000 mm Loading length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, load area including rear bevel approx. 7,150 mm Width: 2,550 mm Loading height: 900 mm Further information Low-loader trailer chassis Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports Wheel chocks with holders Nsdpfxjtrizkj Aanelc Aluminum side underrun protection Rear spray flap across the entire width Half-shell mudguards on 1st and 2nd axle with anti-spray flaps behind each axle, anti-spray flap behind 4th axle Excavator arm recess above the rear axles, extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, and approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator arm recess, lateral on the main frame approx. 300 mm from the front and approx. 200 mm before the rear bevel Spare wheel carrier for 1 spare wheel, upright on the gooseneck right at the front. Spare wheel, make identical to the main tires, steel rim Storage box recessed in the gooseneck floor with lid; dimensions W = 720 mm / L = 520 mm / D = 170 mm 1st pair of wheel recesses after the gooseneck, recessed in the low-bed lane area, ramped for entry, bottom length approx. 1,600 mm, depth approx. 400 mm. Note: Frame in the main beam area is 400 mm higher than the wheel recess 2nd pair of wheel recesses between the axles, recessed in the low-bed lane area, ramped for entry, bottom length approx. 600 mm, depth approx. 300 mm. Note: Frame in the main beam area is 300 mm higher than the wheel recess Extendable width up to 3,000 mm (not extendable in the rear bevel and not in the lower wheel recesses) (track width of the construction equipment or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks below the low-bed area 70 mm wooden planks for extension to 3,000 mm Lashing eyes on the low-loader 1 pair of lashing eyes, recessed in the front of the gooseneck, 5 t each 4 pairs of lashing holes in the outer frame, 5 t each (for lashing straps) 8 pairs of lashing rings, integrated on top and side of outer frame, 10 t each 2 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets integrated in the outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 1 pair of folding lashing eyes, additionally recessed in the floor, 10 t each 1 inside next to the main frame at the start of the low bed 2 pairs of additional folding lashing eyes, 10 t each 1 on the gooseneck (protrudes over edge) 1 behind last axle, recessed in floor Drawbar coupling / turntable trailer hitch Towing bar with certified 50 mm towing eye, towing eye inclined 8° D-value at least 160 kN Axles & suspension BPW drum brake axles "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical front axle load equalization (rocker balance) Wheels and tires 235 / 75 R 17.5" Manufacturer's choi

Stanje: rabljeno, lastna masa: 10.680 kg, največja dovoljena obremenitev: 29.320 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2011, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 10.500 mm, širina tovornega prostora: 2.510 mm, višina nakladalnega prostora: 970 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 4 osi, obračalna plošča, zračno vzmetenje, ABS (protiblokirni sistem), možno razširiti na 3 m, pritrdilna ušesa, hidravlične rampe, zadnja podpora, dvojne pnevmatike, izrezi za kolesa. Nadgradnja: 4-osna nizkopodna prikolica s hidravličnimi nakladalnimi rampami, 4x 10t Gigant osi, bobnaste zavore! Dolžina ramp približno 2850 mm! Nakladalna višina približno 970 mm! Višina izrezov za kolesa spredaj približno 600 mm in zadaj približno 670 mm! Prikolica je dobila novo vrtljivo ploščo! PODATKI O DODATNI OPREMI SO BREZ GARANCIJE, pridržujemo si pravico do sprememb, vmesne prodaje in napak! Nedsxx A H Ispfx Aanjlc

Stanje: rabljeno, največja dovoljena obremenitev: 30.500 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2015, dolžina tovornega prostora: 10.170 mm, širina tovornega prostora: 2.500 mm, skupna širina: 2.520 mm, skupna višina: 3.600 mm, Oprema: ABS, Vroče pocinkano, dolžina nizkega ležišča cca 6520 mm, razširljivo na 3000 mm, višina nakladanja: cca 910 mm, zadnji naklon: 850 mm, visoko ležišče 2800 mm, vlečno oko 50 mm, vdolbina za roko bagra, hidravlične nakladalne rampe stransko pomične (D x Š) mm, 9 x vponk na vsaki strani, 12 x pritrdilnih obročev na vsaki strani, 2 x zložljivi oporni nogi zadaj, spojna glava Duo-Matic, rotacijska opozorilna luč, izvlečne opozorilne table, ABS, EBS, SAF os(i), bobnaste zavore, listnato vzmetenje, vozilo je lahko opremljeno z reklamnimi nalepkami in/ali napisano. SI86936 Naša ponudba je načeloma brez nove tehnične preglede (TÜV). Če želite nov tehnični pregled, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko opremljeno z reklamnimi nalepkami in/ali napisano. Veljajo naši splošni dobavni in plačilni pogoji. Z veseljem vam pripravimo ponudbo za financiranje ali leasing tega objekta. Nedpsy Trwzefx Aanjlc Prosimo, kontaktirajte nas!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 9.900 kg, največja dovoljena obremenitev: 14.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Rešitev transporta po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema sta prilagojena individualno po željah stranke. Dodatne informacije Šasija Varjena jeklena konstrukcija Obročni vrtljivi podstavek z močnim krožnim ležajem, vključno s potopljenim zabojiščem. Prednji del z vrtljivim podstavkom Zadnja, zložljiva podpora 2 zagozdi z nosilcem Bočna zaščita proti naletu iz aluminija Zadnja brizgalna zaščita čez celotno širino Razširitve izvlečne do 3.000 mm (ne velja za zadnji naklon) (Sled vozil ali gradbenih strojev za prevoz ne sme presegati zunanje širine okvirja 2.550 mm) Shranjevalni prostor za lesene pode na sredini tovorne površine Leseni podi debeline 70 mm za širitev na 3.000 mm Privezne točke za nizko prikolico 3 pari priveznih točk po 10 t spredaj, vgrajenih v tla 6 parov pritrdilnih gobic zgoraj in ob straneh zunanjega okvirja, po 10 t 1 x v predelu vratu ostale enakomerno razporejene, razmik največ 1.200 mm 1 x zadnja naklonska plošča 5 parov žepov za stebre v zunanjih okvirih, notranje mere 70 x 40 mm (lahko se predelajo za obroče za privez do 5 t, ni vključeno) Vlečna naprava, prikolica z vrtljivim podstavkom Vlečna kljuka s preizkušenim 40 mm vlečnim obročem Opomba! Pri 40 mm vlečnem obroču je največja dovoljena skupna masa tovornjaka 18.000 kg, sicer je potreben 50 mm obroč. Osi in vzmetenje SAF bobnaste zavore Laser merjene osi/podvozje za zmanjšanje obrabe pnevmatik in porabe goriva Parabolično vzmetenje z brezvzdrževalnim jekleno-gumijastim ležiščem in mehanskim izenačenjem osne obremenitve spredaj in zadaj (nihajna izravnava) Kolesa in pnevmatike 235 / 75 R 17,5 po izbiri proizvajalca Jeklena platišča v dvojni izvedbi, tovarniško srebrna Zavorni sistem Dvovodna zračna zavora Vzmetno parkirna zavora 2 prednji varno zamenljivi priključni glavi z povezovalnimi cevmi do vlečnega vozila, ABS in ALB, ABS vtič spredaj, vključeno povezovalni kabel Pozor: Prikolica se sme uporabljati samo s vozili, ki zagotavljajo učinkovitost ABS sistema! Elektrika 24 V, večkomorni žarometi, bočne rumene LED luči 2 prednji beli pozicijski luči 2 zadnji belo/rdeči sledilni luči 2 x 7-polna varno izmenljiva vtiča spredaj s povezovalnim kablom, 1 LED rotacijska luč z nosilcem, vezana na pozicijsko razsvetljavo (luč snemljiva) 2 para opozorilnih tabel, dvojno LED osvetljene in izvlečne do 3.000 mm Tla Sprednji del jeklena tla, nato z 70 mm mehkega lesa, na predelu kolesnih lokov jeklena/rebrasta pločevina Zadnji naklon z 70 mm mehkega lesa Nakladalne rampe Jeklene rampe, dolžina 2.800 mm, širina 750 mm, bočno pomične premazane z lesom s pomočjo vzmetne podpore Navodila za uporabo Nlsdpfxsi Ri I Eo Aanec Pri 10.000 kg osne obremenitve je potrebna izredna dovoljenja, dovoljeno je le neločljivo blago!!! Navedena skupna masa je tehnično možna; glede na tovor skupna masa pri upoštevanju dovoljenih osnih/pritiskov/sedlov ne bo vedno mogoča. Država homologacije/tablice Država homologacije: Nemčija 1x z Dekra certifikatom in poročilom (po §13 EG - FGV) 24/7-servisna linija pripravljeno za dvovrstična nosilca registrskih tablic Obrisna oznaka z odsevnimi trakovi po ECE R 048, bočno belo in zadaj rdeče Barvanje Okvir RAL 3002 karmin rdeč 10 let garancije proti prekoroziji Vlečna kljuka pocinkana ali črna, po izbiri proizvajalca Rampe vroče pocinkane Pozor: Arhivske slike!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 8.500 kg, največja dovoljena obremenitev: 15.500 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 890 mm, skupna dolžina: 11.940 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Rešitev za transport po meri Prilagodite svoje Fliegl vozilo glede na vaše potrebe. Prikazano vozilo je primer. Proizvodnja in oprema potekata individualno glede na želje stranke. Dodatne informacije Podvozje nizkopodnega priklopnika Varjena jeklena konstrukcija Obračališče z močnim krožnim ležajem Zložljive zadnje opore 2 zagozdi za kolesa z nosilcem Stranska zaščita pred naletom iz aluminija Zadnji blatniki čez celotno širino Četrtinski blatnik pred 1. osjo Raztegljive razširitve do 3.000 mm (ne v zadnjem poševnem delu) (Širina kolesnih stez prevažanih gradbenih strojev oz. vozil ne sme presegati zunanje širine okvirja 2.550 mm) Sredinsko skladišče za lesene deske na nakladalni površini Lesene deske 70 mm za razširitev do 3.000 mm Privezne točke za nizkopodnega priklopnika 1 par priveznih obročev na pregibu, vsak do 5 t 9 parov vdelanih priveznih gumbov zgoraj in ob strani v zunanjem okvirju, vsak do 10 t 2 x spredaj na pregibu 7 x v nizkem delu 6 parov priveznih lukenj v zunanjem okvirju nizkega dela, vsak do 5 t (za pritrditev napenjalnih pasov) Pripenjanje priklopnika s krožnim obračališčem Vlečna roka s preverjenim vlečnim obročem 50 mm Osi in vzmetenje SAF bobnaste zavore Osi / podvozje izmerjeni z laserjem za zmanjšanje obrabe pnevmatik in porabe goriva Parabolično vzmetenje z vzdrževanjem prostim jekleno-gumijastim ležiščem ter mehanskim izravnalnim sistemom Izravnava osnih obremenitev spredaj in zadaj (nihajni izravnalnik) Kolesa in pnevmatike Nodpfx Aaei Ri Izonslc 235 / 75 R 17,5 po izboru proizvajalca Jekleni platišči v dvojni izvedbi, tovarniško srebrni Zavorni sistem 2-vejni tlačni zračni zavorni sistem Vzmetna parkirna zavora 2 priključni glavi spredaj z varno zamenjavo, s povezovalnimi cevmi do vlečnega vozila ABS in ALB, z ABS vtičem spredaj, s povezovalnim kablom Pozor: Priklopno vozilo sme vleči le vlečno vozilo z ustrezno funkcionalnostjo ABS! Elektrika 24 V, večkomorni žarometi, stranske rumene LED luči 2 bela prednja pozicijska žarometa 2 bela/rdeča svetila za ohranjanje smeri zadaj 1 LED rotacijska svetilka z nosilcem, vklop prek pozicijske luči (svetilka snemljiva) 2 para opozorilnih tabel, dvojna LED osvetlitev, raztegljivi do 3.000 mm 2 x 7-polni zamenljivo varni vtiči spredaj s povezovalnim kablom Tla Prednji pregib s premazom iz jeklene/reliefne pločevine nato s 70 mm mehkim lesom; v območju kolesnih obokov jeklena/reliefna pločevina Zadnji poševni del s 70 mm mehkim lesom Nakladalne rampe Jeklene rampe, dolžina 2.800 mm, širina 750 mm, stransko pomične obložene z lesom Hidravlično prek pogona na tovorni vlačilec z dušilcem, upravljanje levo spredaj Hidravlični priključek s SVK-vtičem NW 10/3, vklj. povezovalna cev Navodila za obratovanje Pri osni obremenitvi 10.000 kg je potrebna posebna dovoljenje, dovoljeno je samo prevažati nedeljiv tovor! Navedena skupna masa je tehnično možna; odvisno od tovora morda ni moč doseči skupne mase ob upoštevanju dovoljenih osi / podpornih in sedlastih obremenitev (Možna slaba vozna in sledilna lastnost zaradi nepravilne razporeditve tovora) Država registracije/tabele Država registracije: Nemčija z Dekra pregledom in poročilom (po §13 EG - FGV) 24/7-servisna linija vključena pripravljeno za dvovrstni nosilec registrske tablice Obrisno označevanje z odsevnimi trakovi po ECE R048, stransko bela, zadaj rdeča Barvanje Okvir DB 7350 Novasiva 10 let garancije proti prerjavitvi Vlečna roka pocinkana ali črna, po izbiri proizvajalca Nakladalne rampe vroče pocinkane

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 14.300 kg, največja dovoljena obremenitev: 9.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 12.000 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Rešitev po meri za transport Konfigurirajte svoje vozilo Fliegl glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema se izvedeta individualno po želji stranke. Dodatne informacije Podvozje Jeklena varjena konstrukcija Vrtljiva plošča z robustnim krogličnim ležajem Zložljivo zadnje podpiranje 2 zagozdi za kolesa + nosilec Bočna zaščita iz aluminija Zadnje blatne zavese po celotni širini Četrtinski blatniki pred 1. osjo Izkop za roko bagra nad zadnjimi osmi do zadka, približno 1800 mm dolga, približno 650 mm široka in približno 150 mm globoka, 2 para pritrdilnih odprtin po 5 ton v izkopu roke bagra ob straneh vzdolžnega okvirja približno 300 mm od spredaj in približno 200 mm pred zadnjim nagibom 1 skladiščna škatla v poglobljenju tal z pokrovom, Š=720 mm/ D=520 mm / V=170 mm 1. par kolesnih izkopov za poglobitvijo na območju nizkega dna, z naklonom za vožnjo, dolžina spodaj približno 1600 mm, globina približno 400 mm. Opomba! Okvir na glavnem nosilnem območju je 400 mm višji od kolesne izkopa. 2. par kolesnih izkopov med osmi v nizkem dnu na območju voznih stez, z naklonom za vožnjo, dolžina spodaj približno 600 mm, globina približno 300 mm. Opomba! Okvir na glavnem nosilnem območju je 300 mm višji od kolesne izkopa. Pokrov za kolesne izkope, izvlečen iz glavnega okvirja, z lesenimi vložki. Nedpfxsi Ri I No Aanolc Razdalja od glavnega okvirja – nosilec do nosilca zunaj približno 1280 mm Razširitve izvlečne do 3000 mm, pri izlivih kolesnih izkopov zložljive (razširitev ni na zadnjem nagibu in ne na dnu kolesnih izkopov) Prostor za shranjevanje lesenih desk na sredini nakladalne površine ali pod nakladalno površino glede na tehnične možnosti Lesene deske 70 mm za razširitev na 3000 mm Pritrdilne točke nizkonosilca 1 par rin-pritrdišč spredaj v poglobitvi, vsaka za 5 ton 8 parov pritrdilnih gumbov zgoraj in ob straneh v zunanjem okvirju, vsaka za 10 ton 2 x spredaj v poglobitvi 6 x v nizkem dnu; prva pritrdilna točka 250 mm od spredaj in zadnja največ 250 mm od zadaj, razdalja med pritrdišči največ 1100 mm 5 parov obročastih pritrdilnih točk v zunanjem okvirju, vsaka za 5 ton (lahko se spremeni v žepe za kole) Priključek za prikolico – vrtljiva plošča Vlečna ojnička s preizkušenim vlečnim obročem 50 mm, z 8° nagnjenim vlečnim obročem Osovine in vzmetenje SAF bobnaste zavorne osi Z laserjem izmerjeno podvozje – za zmanjšanje obrabe pnevmatik in porabe goriva Zračno vzmetenje s funkcijo dviga in spuščanja, ločeno za spredaj in zadaj Kolesa in pnevmatike 235/75R17,5 po izbiri proizvajalca Jekleni platišči v dvojni izvedbi, tovarniško srebrni Zavorni sistem Dvovodna zračna zavora Vzmetno zadržana parkirna zavora Infocenter prikolice za prikaz podatkov o vozilu kot so osni tlak (ni overjene tehtnice) in števec kilometrov Prepoznavanje osnega tlaka preko signala EBS-Canbus, za prikaz na zaslonu v kabini, tovornjak mora biti ustrezno pripravljen, nobena instalacija na tovornjaku (ni overjene tehtnice) Stabilnostni sistem za vozila Duomatic priključek spredaj, z povezovalnim kablom na vlečno vozilo EBS, elektronski zavorni sistem z EBS priključkom spredaj in povezovalnim kablom Pozor: Priklopno vozilo se sme vleči le z vlečnimi vozili, ki zagotavljajo delovanje ABS! Elektrika 24 voltov, večkomorni LED luči z uporom, stranske rumene LED signalizacije, LED osvetlitev registrskih tablic, 2 bele pozicijske LED luči spredaj 2 belo/rdeči LED smerni lučki zadaj Dodatni LED delovni žaromet, zadaj, upravljan prek vzvratne luči 1 x 15-polni vtikač spredaj

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, višina nakladalnega prostora: 900 mm, skupna dolžina: 11.940 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Further Information Chassis Low-loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium Full-width rear mudflap Half-shell fenders on 1st and 2nd axle with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind 3rd and 4th axle Excavator arm recess over the rear axles, starting to the rear, approx. 1800 mm long, approx. 650 mm wide, and approx. 150 mm deep, 2 pairs of lashing holes each rated 5 t located laterally in the excavator arm recess in the main chassis, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock (Padlock not included) 1 storage box let into the gooseneck in the floor with lid, w=720 mm/ l=520 mm / d=170 mm Extendable width to 3,000 mm (not at the rear bevel) (the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) 70 mm timber planks for widening to 3,000 mm Storage compartment for timber planks under the loading platform Lashing rings low-loader (40 lashing possibilities) 1 pair of lashing rings on gooseneck, each 5 t 9 pairs of lashing mushrooms recessed into the outer frame, top and side, each rated 10 t 2 x in the front on the gooseneck 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each rated 5 t (for lashing strap hooks) 3 additional pairs of folding lashing rings, each rated 10 t 1 x inside beside the main frame at the beginning of the low-bed 1 x on the gooseneck (protruding) 1 x recessed into the floor behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 50 mm towing eye, towing eye inclined at 8°, D-value at least 160 kN Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 manufacturer’s choice Steel rims, twin mounting, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, including connection lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 volt, multi-chamber lamps, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with holder, operated via parking light (beacon removable) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Flooring Gooseneck at front with steel/chequer plate floor Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber decked Hydraulically operated via tractor PTO with restrictor, control located on the left side at the front Nljdpfx Aji Ri Dajansc Hydraulic connection with SVK connector NW 10/3, incl. connecting hose Registration Country/Plates Registration country: Germany 24/7 Service Hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, side white and rear red Warning plate according to ECE – 70 Paintwork Chassis hot-dip galvanized including passivation, 15-year warranty again

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT44001000966, lastna masa: 9.400 kg, največja dovoljena obremenitev: 30.600 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2010, dolžina tovornega prostora: 7.145 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 12.120 mm, skupna širina: 27.500 mm, skupna višina: 900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", barva: rdeča, These images are for reference only! Gross weight perm. / technical: 24,000 / 40,000 kg Payload perm. / technical approx.: 14,600 / 30,600 kg Axle load perm. / technical: 24,000 / 40,000 kg Unladen weight (base version) approx.: 9,400 kg +/- build tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low loader platform length in driving lane area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loading height in the low bed (loaded) approx.: 900 mm Tow height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium 1 plastic toolbox Extendable widenings to 3,250 mm (not at rear bevel) (tracking width of transported construction machines or vehicles must not exceed outer frame width of 2,750 mm) Central storage compartment for wooden planks 70 mm wooden planks for widening to 3,000 mm 2 pairs of stake pockets in the low bed, integrated in the floor longitudinal beams Lashing rings, low loader: 2 pairs of lashing rings on the neck, each 5 t 1 pair of lashing rings in the rear bevel 4 recessed lashing rings, placed centrally in the floor 2 pairs of key slot profiles in the driving lane, for longitudinal guide rails and as additional lashing points 6 pairs of lashing mushroom anchors in the low bed outer frame, each 10 t 5 pairs of stake pockets in the outer frame of the low bed 4 additional pairs of 10 t lashing rings: 1 on the neck 3 recessed in the floor of the low bed Drawbar coupling, turntable trailer: Drawbar with tested 50 mm towing eye Axles + suspension: Drum brake axles Parabolic spring suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization front and rear (rocker leveling) Wheels and tires: 235 / 75 R 17.5" Steel rims, twin arrangement, factory silver Brake system: 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connection lines for towing vehicle ABS and ALB, with ABS connector at front, with connection cable Attention: The towed trailer may only be pulled by towing vehicles that ensure proper function of the ABS! Floor: Neck area with steel/chequer plate flooring then 70 mm softwood floor, wheel recesses with steel/chequer plate flooring Rear bevel with 70 mm softwood floor Nlsdpfx Aaeyxq A Honec Access ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surface Hydraulically operated via tractor PTO Operating instructions: For 10,000 kg axle load, a special permit is required, only indivisible loads permitted!!! Note! Overlength and excess width, special permanent approval required. For applications for special permits for heavy-duty transport, an axle load display is required for air-suspended vehicles! This applies to all deviations from § 34 StVZO (axle load and permissible gross weight exceedance) that require a special permit under § 70 StVZO. The declared gross weight is technically feasible; depending on the load, the gross vehicle weight may not be achievable while observing permissible axle, support, and saddle loads. (Poor driving and trailing behavior possible due to incorrect load distribution) These images are for reference only!

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New Fliegl 4-Axle Low Loader Trailer with Ramps, Model VTS 400 Gross weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Total length: 11,940mm Total loading length: approx. 10,410mm; Gooseneck: approx. 2,490mm; Loading platform incl. rear bevel: approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional information plus delivery/preparation from stock location 26639 Wiesmoor: €1,280.00 net Leasing offer: term 48 months, down payment only VAT, residual value 40% Monthly instalment EUR 759.00 Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear spray flap Half-shell mudguards on axle 1 + 2 with anti-spray flaps behind each axle Anti-spray flaps before and behind axles 3 and 4 Excavator arm recess over rear axles, stretching to the rear, approx. 1,800mm long, 650mm wide, 150mm deep 2 pairs of lashing holes (5t each) in the excavator arm recess, side-mounted on the longitudinal frame, approx. 300mm from the front and approx. 200mm before the rear bevel 1 plastic toolbox, w=600mm / h=425mm / d=460mm, lockable Storage box recessed into the gooseneck floor with lid, w=720mm / l=520mm / d=170mm Extendable widenings to 3,000mm (not at rear bevel) (Note: the track width of machines or vehicles being transported must not exceed the outer frame width of 2,550mm) Wooden plank compartment under the low-bed platform 70mm wooden planks for extension to 3,000mm Low loader lashing points 1 pair of lashing cutouts sunk in the longitudinal beam at the front of the gooseneck, 10t each 4 pairs of lashing holes in external frame (5t each, suitable for tension belt attachment) 9 pairs of lashing mushrooms set into the external frame above and on the sides, each 10t 2x front on gooseneck 7x low-bed area 1st lashing point 250mm from front, last max. 250mm from rear, max distance between lashing points 1,100mm 3 additional pairs of folding lashing eyes, 10t each: - 1x on gooseneck (protruding) - 1x inside start of low-bed area in longitudinal beams - 1x recessed in floor behind last axle Towing arrangement, turntable trailer Drawbar with certified 50mm draw eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice Chassis/axle laser alignment (reduces tyre wear and fuel consumption) Air suspension with raise & lower valve + auto reset function Wheels and tyres 235/75 R 17.5”, manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line pneumatic brake system Spring-loaded parking brake Axle load detection via EBS CAN-Bus signal (for in-cab display, truck must be pre-equipped, not a calibrated scale) Vehicle stability system 2 foolproof coupling heads at the front, with connecting lines to tractor unit 12-24V EBS (Electronic Braking System) with EBS plug at the front and connecting cable (Knorr brand) Note: Trailer must only be towed by towing vehicles capable of ensuring full ABS functionality! Nljdpfx Aaovv D Ixenjc Electrics 12-24V, multi-chamber LED lamps, amber LED side markers, LED license plate lighting (Note: On certain tractor units, malfunction messages may appear even if operational) 2 white position lights at the front (LED) 2 white/red contour marker lights at the rear (LED) 2x 7-pin foolproof connectors at the front

Stanje: novo, največja dovoljena obremenitev: 31.100 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.520 mm, Gross weight: 24,000kg / 40,000kg Curb weight: 8,900kg Payload: 15,100kg / 31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm gooseneck, 7,920mm loading deck including rear bevel Width: 2,520mm Loading height: 900mm Further information: plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 net Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support Wheel chocks with holder Aluminium side underrun protection Rear mudflaps across the full width (not in combination with forklift holder) Half-shell fenders on 1st and 2nd axles with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axles Excavator arm recess over rear axles to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator recess at the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm (not in rear bevel) (Track width of machines/vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks under low-bed platform 70 mm timber for widening to 3,000 mm Low loader lashing eyes 1 pair of lashing cut-outs at the front longitudinal member in gooseneck, each rated 10 t 4 pairs of lashing holes in the outer frame, each 5 t (lashing strap attachment) 9 pairs of recessed lashing mushrooms in the outer frame, top and side, each 10 t 2 x front on gooseneck 7 x in lowered bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, spacing not greater than 1,100 mm 3 pairs of additional folding lashing eyes, each 10 t: 1 x on gooseneck (protrudes) 1 x at beginning of low bed, recessed in longitudinal rails 1 x behind the last axle, recessed in the floor Trailer tow device Drawbar with certified 50 mm towing eye Drawbar height adjustable by spring Axles & suspension Drum brake axles, manufacturer's choice Axles/chassis laser aligned—reduces tire and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (equalisation rocking beams) Nodpferducpex Aanolc Wheels and tires 235/75 R 17.5" manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connection leads to tractor unit 24 Volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by tractors supporting ABS function! Electrics 12–24 volt, multi-chamber LED lamps, side yellow LED marker lights, LED license plate lights (note: some tractors may show false diagnostics despite correct function) 2 white position lights at the front, LED 2 white/red lane marker lights at the rear, LED 2 x 7-pin foolproof connectors at the front, with connecting cable 1 LED beacon with holder, switched via position light (removable beacon) 2 pairs of warning plates, double LED illuminated and extendable to 3,000mm Floor Gooseneck front with steel/checker plate covering then approx. 70 mm softwood floor, in the wheel arch area steel/checker plate covering Rear bevel with 70 mm softwood floor A

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with ramps, model VTS 400 Nsdpfxoxrx Nls Aanslc Gross weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm; neck approx. 2,490 mm; loading bed incl. rear taper approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Further information: Plus pre-freight / preparation ex stock 26639 Wiesmoor: €1,280.00 / net Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear mud flap Half-shell mudguards, 1st and 2nd axles with anti-spray flaps behind each axle, Anti-spray flaps in front of and behind 3rd and 4th axles Excavator stick trough over rear axles to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing holes, each 5 t, in the excavator stick trough on the longitudinal frame, approx. 300 mm from the front and 200 mm in front of the rear slope 1 plastic toolbox, w=600 mm / h=425 mm / d=460 mm, lockable Storage box recessed in the neck floor with lid, w=720 mm / l=520 mm / d=170 mm Extendable outriggers to 3,000 mm (not for rear slope) (Track width of construction machinery/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for wooden planks under the low-bed deck Wooden planks, 70 mm, for extension to 3,000 mm Lashing points, low-loader: 1 pair of lashing cutouts in the front longitudinal beams, embedded in the neck, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching ratchet straps) 9 pairs of lashing mushrooms, embedded in and above the outer frame, each 10 t: - 2 × on the neck - 7 × in the low-bed section First lashing point 250 mm from the front, last max. 250 mm from the rear; lashing point spacing max. 1,100 mm Additionally, 3 pairs of folding lashing eyes, each 10 t: - 1 × on the neck (protruding) - 1 × at the start of the low-bed inside the longitudinal beams - 1 × in the floor behind the last axle Drawgear, turntable trailer: Drawbar with certified 50 mm eye Drawbar height adjustment via spring Axles & Suspension: Drum brake axles, per manufacturer’s choice "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and Tyres: 235 / 75 R 17.5", per manufacturer’s choice Steel twin wheels, factory silver Braking system: 2-line air-operated brake system Spring-loaded parking brake Axle load detection via EBS CAN bus signal for display in truck cab (truck must be equipped accordingly; not a calibrated scale) Vehicle stability system: 2 non-interchangeable coupling heads at the front, connection lines to the tractor 12-24V EBS, electronic braking system with EBS socket at the front, including connecting cable (Knorr brand) Attention: The trailer may only be towed by vehicles that guarantee ABS functionality! Electrics: 12-24V, multi-chamber LED lights, side LED marker lights (yellow), LED license plate lighting (Note: Some towing vehicles may display incorrect errors despite proper function) 2 white front position lights, LED 2 white/red rear lane marker lights, LED 2 × 7-pin non-interchangeable sockets at the front, with connection cable 1 LED rotating beacon with bracket, switchable via sidelights (removable beacon) 2 pairs...

Stanje: rabljeno, lastna masa: 5.740 kg, največja dovoljena obremenitev: 24.260 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2020, barva: srebrn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, rotacijska luč, 3 osi, SAF osi, vrtljiva prikolica, listno vzmetenje, ABS (protiblokirni sistem), razširljivo na 3 m, pritrdilne zanke, dvižne rampe 2-delne, mehanske rampe, izvlečna vlečna palica, stranska aluminijasta zaščita, dvojne pnevmatike, EBS Nadgradnja: tovorna dolžina cca 8,5 m, razširljivo na 3,05 m Demonstracijsko vozilo! Parabolično vzmeteno z izravnavo osi zadaj, 3x 10t SAF osi, dovoljena skupna masa možna 30t, po dolžini nastavljiva vlečna palica. Novo vozilo iz zaloge s priložnostno registracijo na proizvajalca 21.07.2020! Podatki o dodatni opremi brez jamstva, spremembe, vmesna prodaja in napake pridržane! Njdpfxjxbttqs Aanolc

Stanje: rabljeno, konfiguracija osi: 3 osi, skupna širina: 25.500 mm, skupna višina: 35.000 mm, Leto izdelave: 2018, Oprema: ABS, = More options and equipment = - Rear air suspension - Front air suspension = Notes = For inquiries about the vehicle, Mr. Seidel (by phone) will be happy to assist you. Fliegl DTS 300 low-bed trailer BPW axles, drum brakes, spring-loaded brakes, mechanical ramps, permissible total weight: 24,000 kg, unladen weight: 6,350 kg, payload: 17,650 kg, loading dimensions: L 8,490 mm W 2,510 mm, tire tread: 1st axle 7-12 mm, 2nd axle 7-8 mm, 3rd axle 4-7 mm On request, we can provide you with a leasing or financing offer. Mr. Seidel (tel.) will be happy to assist you. Further information can be found on our homepage. Nsdoy Svrgopfx Aanelc ... Errors, changes, and prior sale excepted!!! = Further information = Unladen weight: 6,350 kg Payload: 17,650 kg GVW: 24,000 kg Please contact Tobias Ebert for more information.

Stanje: novo, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 11.940 mm, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 235/75R17,5, barva: drugo, Leto izdelave: 2026, 4-osna nizkopodna prikolica, vroče cinkana, razširljiva na 3000 mm. Jeklene rampe dolžine 3000 mm, širine 750 mm, hidravlično upravljanje s hidravličnim bočnim pomikom. Jama za rovokopačev izpust dolžine 1800 mm, širine cca 650 mm in globine 150 mm. Dno iz mehkega lesa debeline 70 mm. Nodpfxjyxft Tj Aanjlc Vozilo na zalogi.

Stanje: novo, številka stroja/vozila: Produktpalette, lastna masa: 8.400 kg, največja dovoljena obremenitev: 15.600 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 860 mm, skupna dolžina: 10.900 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Rešitev transporta po meri Konfigurirajte svoje Fliegl vozilo glede na svoje zahteve. Prikazano vozilo je primer. Proizvodnja in oprema se prilagodita posameznim željam stranke. Dodatne informacije Podvozje Jeklena varjena konstrukcija Vrtljiva pesta z robustnim kroglastim ležajem Zložljiva zadnja podpora 2 zagozdi za kolesa + nosilec Stranska zaščita iz aluminija Zadnje blatne zavese po celotni širini Četrtinski blatniki pred 1. osjo 1. par vdolbin za kolesa po nižji površini v poglobljenem delu, nagib za vstop, dolžina dna ca. 1600 mm, ca. 400 mm globoko. Opomba! Okvir na osrednjem nosilcu je 400 mm višji kot vdolbina za kolo. 2. par vdolbin za kolesa med osmi v poglobljenem delu, nagib za vstop, dolžina dna ca. 600 mm, ca. 300 mm globoko. Opomba! Okvir na osrednjem nosilcu je 300 mm višji kot vdolbina za kolo. Razširitev izvlečna do 3000 mm (ne vključuje zadnjega nagiba) 70 mm lesene deske za razširitev na 3000 mm Pritrdilne točke za nizkopodnega priklopnika 1 par izrezov za pritrditev v vzdolžnem nosilcu spredaj v poglobljenem delu, vsaka 10 t. 4 para pritrdilnih lukenj v zunanjem okviru, vsaka 5 t. 7 parov pritrdilnih gobic zgoraj in ob strani v zunanjem okviru, vsaka 10 t 1x spredaj v poglobljenem delu 6x v poglobljenem delu prva pritrdilna točka 250 mm od spredaj in zadnja maks. 250 mm od zadaj, razmak pritrdilnih točk ne večji kot 1100 mm Vleka priklopnika na vrtljivem podvozju Vlečna kljuka s certificiranim 40 mm vlečnim obročem Osovine in vzmetenje SAF bobnaste zavore Osovine/podvozje lasersko izmerjeni za zmanjšanje obrabe pnevmatik in porabe goriva Parabolično vzmetenje z brezvzdrževanjem jekleno-gumijastim ležajem Kolesa in pnevmatike 235/75R17,5 po izbiri proizvajalca Jeklena platišča v dvojni izvedbi, barvano v srebrno (tovarniško) Zavorni sistem 2-cestni zračni zavorni sistem Vzmeteni parkirni zavorni cilinder 2 varno zamenljiva spojna priključka spredaj, z veznimi cevmi do vlečnega vozila, ABS ter ALB, z ABS priključkom spredaj ter povezovalnim kablom. Pozor: priklopno vozilo sme vleči samo vlečno vozilo, ki omogoča delovanje sistema ABS! Elektrika 24 voltov, večkomorni žarometi, stranska rumena LED osvetlitev, 2 sprednji beli pozicijski luči 2 beli/rdeči luči za označevanje sledi zadaj 2 x 7-polna varno zamenljiva vtiča spredaj z veznim kablom, 1 LED rotacijska luč z nosilcem, upravljana preko pozicijske luči (luč odstranljiva) 2 para opozorilnih tabel, dvojno LED osvetljenih, izvlečenih do 3000mm Nodsi Ri Rvopfx Aanjlc Pod Sprednji poglobljen del s premazom iz jekla/rebraste pločevine Shranjevalni zaboj v nagibu proti poglobljenemu delu, nato s 70 mm mehkolesom, na območju kolesnih vdolbin jeklen/rebrast premaz Zadnji nagib s 70 mm mehkolesom Nizkopodno nakladalno površino vklj. z zadnjim nagibom 6500 mm Ramps Jeklene rampe, dolžine 2800 mm, širine 750 mm, stransko premične z leseno oblogo z dvižno pomočjo s vzmetjo Navodila za uporabo Pri osni obremenitvi 10.000 kg je potrebno posebno dovoljenje, možno le za nedeljeno blago! Navedena skupna masa je tehnično možna, glede na vrsto tovora pa skupna masa morda ne bo dosežena v skladu z dovoljenimi osnimi, podpornimi in priklopnimi obremenitvami. (Slabe vozne in sledilne lastnosti zaradi nepravilne razporeditve tovora možno!) Država registracije/tablice Država registracije: Nemčija z Dekra pregledom in poročilom (po §13 EG - FGV)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 8.500 kg, največja dovoljena obremenitev: 15.500 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 890 mm, skupna dolžina: 11.940 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 r 17,5, stanje pnevmatik: 100 odstotek, Rešitev prevoza po meri Konfigurirajte svoje vozilo Fliegl skladno z vašimi zahtevami. Prikazano vozilo je zgolj primer. Proizvodnja in oprema sta individualno prilagojeni željam stranke. Dodatne informacije Podvozje - Jeklena varjena konstrukcija - Vrtljiva vlečna plošča z močnim krogličnim ležajem - Zložljivo zadnje oporo - 2 zagozdi za kolesa z nosilcem - Stranska zaščita iz aluminija - Zadnji blatniki po celotni širini - Polovični blatniki pri 1. in 2. osi z zaščito proti škropljenju za vsako os, zaščita proti škropljenju pred in za 3. ter 4. osjo - Poglabljena odprtina za roko bagra nad zadnjima osma do zadaj, pribl. 1800 mm dolga, 650 mm široka in 150 mm globoka, 2 para pritrdilnih odprtin po 5 t v poglobitvi za roko bagra ob vzdolžnem okviru cca 300 mm od spredaj in cca 200 mm pred zadnjim nagibom - 1 plastična orodjarna z vstavljenim dnom, š=620/v=360/g=440 mm, zaklepanje s ključavnico (ključavnica ni priložena) - 1 skladiščni predal v dnu s pokrovom, širina 720 mm, dolžina 520 mm, globina 170 mm - Razširitve izvlečne do 3.000 mm - Lesene deske 70 mm za razširitev do 3.000 mm - Predal za lesene deske pod nakladalno površino - Pritrdilne točke za nizkopodno prikolico (40 možnosti pritrditve) - 1 par pritrdilnih ušes na zvitju po 5 t Nedpfei Ri A Sjx Aanelc - 9 parov pritrdilnih gobic zgoraj in ob strani v zunanjem okviru po 10 t - 2 spredaj na zvitju - 7 v globoki postelji - 6 parov pritrdilnih lukenj v zunanjem okviru globoke postelje po 5 t (za pritrjevanje s pasovi) - 3 dodatni par klapnih pritrdilnih ušes po 10 t - 1 znotraj poleg glavnega okvirja na začetku globoke postelje - 1 na zvitju (štrli) - 1 za zadnjo osjo, vgrajeno v tla Vlečno oje priklopnika z vrtljivo ploščo - Vlečna ojnica s preverjenim 50 mm vlečnim obročem, obroč nagnjen za 8°, D-vrednost najmanj 160 kN Premi in vzmetenje - Bobnaste zavore - Parabolično vzmetenje z vzdrževanjem prostim jekleno-gumijastim ležiščem in mehanskim uravnavanjem osne obremenitve spredaj in zadaj (nihalno uravnavanje) Kolesa in pnevmatike - 235 / 75 R 17,5 po izbiri proizvajalca - Jeklena platišča v dvojni montaži, tovarniško srebrne Zavorni sistem - Dvocevni zračni zavorni sistem - Parkirna zavora z vzmetjo - 2 neprestižna sprednja spojna glava z povezovalnimi cevmi do vlečnega vozila - ABS in ALB, z ABS vtičem spredaj in povezovalnim kablom Elektrika - 24 Voltov, večkomorni žarometi, stranska rumena LED osvetlitev - 2 bela pozicijska žarometa spredaj - 2 bela/rdeča sledilna žarometa zadaj - 2 x 7-polni neprestižni vtičnici spredaj s povezovalnim kablom - 1 LED rotacijska svetilka z nosilcem, aktivira se s pozicijsko lučjo (svetilko je mogoče odstraniti) - 2 para opozorilnih tabel, LED osvetljene in raztegljive do 3.000 mm Tla - Sprednji dvig z jekleno/reebrasto pločevino - Sledi 70 mm mehko lesena tla, v območju kolesnih kast jekleno/reebrasto - Zadnji nagib s 70 mm mehkim lesenim dnom Nalaganje ramp - Jeklene rampe dolžine 2.800 mm, širine 750 mm, bočno nastavljive - Prekrite z lesom - S pomočjo vzmetnega dvigala Registracija/tablice - Registracijska država: Nemčija - 24/7 servisna telefonska številka - Pripravljeno za dvovrstni nosilec registrske tablice - Obrisna označitev z odsevnim trakom po ECE R 048, ob strani belo, zadaj rdeče - Opozorilna tabla po ECE-70 Barvanje - Okvir vroče pocinkan, vključno s pasivizacijo, 15 let garancije proti rji - Vlečna ojnica pocinkana ali črna, po izbiri proizvajalca - Nalagalne rampe vroče pocinkane Pozor! Gre za arhivske slike!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.500 kg, največja dovoljena obremenitev: 18.700 kg, skupna masa: 26.200 kg, konfiguracija osi: 2 osi, skupna dolžina: 12.400 mm, skupna širina: 2.550 mm, velikost pnevmatike: 205 / 65 r 17,5, Further Information Nlodpfx Aaji Ri Hronec Chassis: Semitrailer Logistics Fine-grained steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin, rear bevel approx. 1920 mm, continuous ramp hanging bar at the rear and at the front of the gooseneck, ground rollers at the rear, lowered deck (deep bed) after the step-down up to the axle assembly. Drawing release from the customer required upon order! Pair of lashing mushroom pins recessed on top and side in the outer frame, each rated for 10t Pair of lashing eyes recessed in the outer frame on the gooseneck, each rated for 5t 24t two-speed landing gear, single-sided operation, with straight lower part, without compensating plate Foldable rear support, mounted externally Wheel chocks with holder Side underrun protection – aluminum Rear underrun protection – steel, for EU, where technically possible Quarter-shell mudguards With anti-spray mudflaps according to EU regulations 1 pair of wheel recesses recessed after the gooseneck in the deep-bed lane area, sloped for easier entry. Bottom length approx. 1840 mm, recess depth approx. 200 mm. Second pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than the wheel recess. Detailed technical inspection required upon order. Removable wheel recess covers from the deep bed with hardwood inlays, at rear bevel with hardwood inlays. Electric cable winch, 24 volts, pulling force 5500 kg, mounted in the gooseneck step-down, does not reach into load area, operated by remote control, cable length 35 m × approx. 10 mm, with roller fairlead and detachable guide roller at the rear bevel. Axles & Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto-reset function Wheels and Tires 205/65 R 17.5 tires with 129/127K (132/132G) rating for 8t tire load capacity at max. 90 km/h, preference of manufacturer Steel twin wheels, factory silver Brake System 2-line compressed air brake system Spring-actuated parking brake 2 interchangeable coupling heads at front, without connecting line EBS by Haldex, electronic braking system with EBS socket at front, without connecting cable (brake calculation sent to customer for approval, 15.07.2021) Attention: The trailer may only be towed by tractor units that ensure ABS effectiveness! Axle load detection via EBS CAN bus signal, display in the driver’s cab possible (truck must be properly prepared, not installed, not a calibrated scale) Electrics 24 volts multi-chamber rear lights, lateral yellow LED lights 2 white position lights at front 2 white/red outline marker lights at rear 2 × 7-pin and 1 × 15-pin interchangeable sockets at front, without connecting cable Floor Gooseneck with steel/checker plate covering 30 mm phenolic resin plywood floor, in deep bed between main rails In the drive lane area with serrated grating, in wheel recesses with steel/checker plate covering Ramps Pair of aluminum ramps, 3,200 mm long, load capacity 12,000 kg per pair Pair of steel ramps for entry into deep bed Pair of steel ramps for crossing gooseneck Sidewalls Approval / Signage Registration country: Germany With DEKRA inspection and certificate (according to §13 EC-FGV) Prepared for single-line license plate holder Contour marking with reflective strips as per ECE R 048, yellow at sides and red at rear Warning plate as per ECE-70 Paintwork Frame painted RAL 9018 Papyrus White Support feet coated black Attention: Archive ima

Stanje: rabljeno, največja dovoljena obremenitev: 30.670 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 13.850 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.860 mm, prostornina tovornega prostora: 93 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Moving floor +/- 92 cbm, double-wing door with rotary bar lock at the rear, access steps and standing platform at the front of the body, sliding tarpaulin, "Cargo Floor" floor with 21 planks 10 mm, stainless steel wear plate at rear under the moving floor, 12 lashing rings per side, complete emptying (moving bulkhead), push-in/pull-out function, loading pressure gauge, folding rear light guard, cable remote control, ABS, EBS, BPW Eco Plus axle(s), disc brake system, support legs, 1x toolbox, vehicle may be stickered and/or labeled with advertising. Nodpfx Aajuf Irujnelc Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer from one of our partner workshops! The vehicle may be stickered and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are happy to offer you a financing or leasing option for this unit. Please contact us!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 8.900 kg, največja dovoljena obremenitev: 32.100 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.300 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Lowbed Semi-Trailer Chassis Steel welded construction, fifth wheel plate with replaceable double kingpin and two kingpin positions 24 t two-speed landing gear, single-sided operation, with straight lower part, without compensating device Rear supports foldable 2 wheel chocks with holders Side underrun protection in aluminium Quarter-shell mudguards in front of and behind the axle assembly 1st pair of wheel recesses recessed after the gooseneck in the lowbed platform area, with ramped entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note: Main beam area 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axle A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note: Main beam area 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader types with precise specifications (if the total height is exceeded). Wheel recess covers sliding out from the main frame, with timber inserts. Extendable widening to 3,000 mm (not in rear ramp slope and not in the bottom of the wheel recesses) Storage compartment for timber planks on the gooseneck, positioned transversely at the front Timber planks 70 mm for widening to 3,000 mm Tie-down points lowloader 2 pairs of ring lashing eyes, each 5 t at the front on the gooseneck 11 pairs of lashing mushrooms recessed into the upper and side outer frame, each 10 t 2 x on the gooseneck, 9 x distributed in the low loader bed, first lashing eye 250 mm from the front and the last max. 250 mm from the rear, distance between lashing eyes not exceeding 1100 mm 8 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm, or instead of stake pockets, 5 t ring lashing eyes recessed in the floor Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Air suspension Wheels and tyres 235 / 75 R 17.5 to manufacturer’s choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connection cable 2 fail-safe coupling heads at the front with raise & lower valve Axle load detection via EBS Canbus signal, for display in the driver’s cab, truck must be correspondingly equipped Vehicle Stability Control System Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin fail-safe sockets at the front 1 x LED beacon with holder, switchable via parking light 2 pairs of warning boards, double, LED illuminated and extendable to 3,000 mm, removable with plug Flooring Gooseneck with steel/chequer plate overlay Storage box embedded in the transition slope to the gooseneck After that, with 70 mm softwood flooring; in the bottom of the wheel recesses and wheel arch area steel/chequer plate overlay Nedpfx Aaji Ri Hconolc Lowloader platform including rear ramp slope 9,100 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp securing device below Tailored Transport Solution Configure your Fliegl vehicle according to your individual requireme

Stanje: rabljeno, lastna masa: 8.550 kg, največja dovoljena obremenitev: 27.450 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2021, dolžina tovornega prostora: 12.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, barva: rdeča, Leto izdelave: 2020, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 3 osi, zračno vzmetenje, 1. os dvižna, ABS (protiblokirni sistem), hidravlične rampe, zadnje podpore, podporniki. 9 t osi, bobnaste zavore, višina nalagalne površine cca 880-950 mm, razširljivo na 3.050 mm, dolžina nizkega ležišča 8.800 mm, dolžina labodjega vratu 4.000 mm, skupna masa pri 3-osnem vlačilcu 42.000 kg, nosilnost 31.290 kg, RAL 3003. PODATKI O DODATNI OPREMI SO BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane! Nlsdpjzdvc Hefx Aanoc

Stanje: rabljeno, lastna masa: 18.240 kg, največja dovoljena obremenitev: 45.760 kg, skupna masa: 64.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2012, dolžina tovornega prostora: 12.120 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 550 mm, velikost pnevmatike: 285/70R19.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, forced steering, lift and lower function, ABS (anti-lock braking system), lashing eyes. Nsdpfeyf E E Usx Aanslc Body: Low-bed semi-trailer with 3 hydraulically steered axles & jeep dolly. Includes jeep dolly with 10t SAF axle & 295/80R22.5 tires! Rear: 3 x 12t SAF axles! Extendable to 3.2m width, 8m in the low-bed section! With radio and cable remote control, automatic tracking. A construction specification is available and can be sent on request! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!

Stanje: novo, lastna masa: 10.400 kg, največja dovoljena obremenitev: 45.600 kg, skupna masa: 56.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.000 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: zelen, Leto izdelave: 2021, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 3 osi, zračno vzmetenje, ABS (protiblokirni sistem), razširljiv do 3 m, hidravlične rampe, podpora zadaj, podporniki. Nadgradnja: 3-osna nizkopodna polprikolica s hidravličnimi nakladalnimi rampami, 3x12t osi, bobnaste zavore, nakladalna višina cca. 1030 mm, razširljiv do 3 m, hidravlične rampe z lastno električno črpalko! Lastna hidravlična črpalka z elektromotorjem, neodvisna od vlačilca, dolžina čez labodji vrat cca. 4 m, dolžina nizkega poda cca. 8,6 m! Novo vozilo iz zaloge! Primernost za homologacijo EU je še v preverjanju! Podatki o dodatkih brez zagotovila, spremembe, vmesna prodaja in napake pridržane! Nedpew Rf N Defx Aanelc

Stanje: rabljeno, lastna masa: 6.250 kg, največja dovoljena obremenitev: 23.750 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2008, dolžina tovornega prostora: 8.300 mm, širina tovornega prostora: 2.510 mm, višina nakladalnega prostora: 930 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 3 axles, turntable, leaf suspension, ABS (anti-lock braking system), extendable to 3m, lashing eyes, mechanical ramps, rear support, side aluminium underride protection, twin tyres, storage box. Body: 3-axle low loader trailer with mechanical drive-on ramps, 3x 10t Gigant axles, drum brakes, extendable to 3m! Nlodpfx Aaexvzq Henoc Ramp length approx. 2,900 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!