Es-Ge 3-Achs Megatrailer, Hydr. Heckabsenkung, 1Xgel. nakup rabljenega (47.638)

Stanje: novo, največja dovoljena obremenitev: 37.350 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Selection of equipment features. Full equipment specification available on request. Chassis: * Welded construction using high-quality steel profiles with through cross-members, designed for high floor and point loads, equipped with heavy-duty outer frame * Rear loading deck as a steel welded construction with two welded-on external driving tracks made of 5-hole steel plate (Lohr/Rolfo pattern) over a length of approx. 2,250 mm, hydraulically lowerable by approx. 350 mm * Integrated at the rear of the vehicle is a hydraulically extendable loading platform (approx. 1,500 mm) as a steel welded construction with 5-hole steel plate (Lohr/Rolfo pattern) cover, lighting mount, and two ramp compartments with ramp supports * Rear operation and control via an electric-hydraulic unit mounted in a stainless steel box on the left side of the chassis, operated by remote control * Power supply via the towing vehicle’s battery * NATO socket on the front wall (no connecting cable to tractor unit) Coupling device: * 2-inch kingpin, replaceable from below Underrun protection: * Fixed installation compliant with EC regulations Landing legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 10 t air suspension axle units, SAF brand with disc brakes approx. 370 x 45 mm, ABS, 10-stud hub-centered ET120 wheel connection, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), air suspension controlled via hand valve with stop function Steering axle: * 3rd axle as trailing steering axle with manual and automatic reverse lock Lifting axle: * 1st axle automatically liftable, additionally switchable via control on chassis frame or via pin 12 of lighting socket Tyres: * 6 units, 445/45R19.5 brand of our choice, mounted on 14.00x19.5 rims, 10-stud ET120 Mudguards: * EC-compliant, 1/4 PVC mudguards before and after the wheels on the 1st axle (front and rear), 2nd and 3rd axles (rear) Spare wheel holder: * None Brake system: * Two-line brake system according to EC with EBS, automatic load-dependent braking * Spring-loaded brake as parking brake acting on 2 axles, anti-swapping couplings fixed on front cross beam, no connecting line to tractor unit, Wabco brand Lighting system: * EC-compliant, 24-volt, multi-chamber rear lights, license plate lights, LED side marker lights, LED front position lights, and LED lane departure lights at rear, 15-pin socket as well as 2x7-pin sockets fixed on front cross beam, no connecting cables to tractor unit Load securing: * 9 pairs of folding lashing rings evenly distributed, tie-down force approx. 8 t * 7 pairs of folding lashing rings evenly distributed, tie-down force approx. 2.5 t * 2 pairs of folding lashing rings at rear, tie-down force approx. 2.5 t * Drilled holes for tension belts in outer frame every approx. 500 mm Stake pockets: * 16 stakes approx. 100/40 mm, usable length approx. 800 mm Stake pocket holders: * Each side 8 pockets integrated into outer frame * 4 rows of transverse stake pockets across the platform Floor: * Approx. 28 mm Z-hardwood floor set into outer frame Nwedpfxsy Up S So Afask Front wall: * Solid front wall, stake holder for 16 stakes approx. 100/40 * Front wall bolted to head frame Equipment: * 2 wheel chocks with holders * 2 PVC toolboxes, approx. 600/400/500 mm * Rear beacon holder including lamp * 2 pcs LED rear ...

Stanje: rabljeno, največja dovoljena obremenitev: 36.140 kg, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2026, naslednji pregled (TÜV): 04/2027, Oprema: ABS,

Stanje: rabljeno, največja dovoljena obremenitev: 35.480 kg, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2026, naslednji pregled (TÜV): 05/2027, Oprema: ABS, Izpis opreme Podvozje: Varjena konstrukcija iz visokokakovostnih jeklenih profilov z votlinami, zasnovana za visoke točkovne obremenitve. Sprednja zaščita pred podvozjem, širina približno 700 mm, zunanji okvir kot profil UNP, drsna plošča približno 8 mm, višina vratu spredaj približno 130 mm. Priključna naprava: 2-palčni kraljevi zatič. Zaščita pred podvozjem: vijična izvedba, v skladu z ES. Bočna zaščita pred podvozjem: v skladu z ES, iz aluminijastih profilov, eloksirana. Nosilci petega kolesa: 2 x 12 t nosilcev petega kolesa z izravnalno nogo in enostranskim upravljanjem na desni strani. Osi: 3 x 9 t zračne vzmetne osne enote, diskovne zavore 22,5?. Skupna višina približno 180 mm, naprava za dvig in spuščanje prek rotacijskega drsnega ventila. Zavorna sistema: dvo-vodna zavora na stisnjen zrak v skladu z ES, z EBS in RSS, avtomatska regulacija glede na obremenitev, cilindri vzmetnega akumulatorja kot parkirna zavora, zavarovani priključni glav in trdno nameščeni na čelnem nosilcu, brez povezovalnega kabla do vlečnega vozila. Pnevmatike: 6-krat, 385/55 R22,5 160J na jeklenem platišču 11,75 X 22,5 ET 120, proizvajalec po naši izbiri. Nadzor tlaka v pnevmatikah (TPMS) prek CAN-bus sistema EBS. Blatniki: v skladu z ES. Nosilec rezervnega kolesa: brez. Zavarovanje tovor: - 9 parov zložljivih pritrdilnih obročev, enakomerno razporejenih, vlečna sila približno 5,0 t. - 9 parov zložljivih pritrdilnih obročev, enakomerno razporejenih, vlečna sila približno 2,0 t. - Na zunanjem okviru vsakih približno 400-600 mm luknje za pritrditev zategovalnih trakov. Čelna stena: ojačana jeklena konstrukcija, fiksna, približno 1.400 mm visoka. Notranjost obložena s približno 9 mm sitotiskano ploščo (približno 1.250 mm visoka). Nwjdpfx Afjzrq U Hjajk Pod: približno 28 mm Z-trd leseni pod, vgrajen v zunanji okvir z pocinkanimi omega-jeklenimi profili. Osvetlitev: v skladu z ES, 24 Volt, z večprekatnimi svetili, LED stranskimi pozicijskimi lučmi, LED pozicijskimi lučmi bele barve spredaj, LED gabaritnimi lučmi zadaj, lučmi za oznako registrske tablice. Luči za ohranjanje smeri LED. 1x15- in 2x7-polni priključki na čelnem nosilcu. Oprema: - 2 klini z nosilcem. - Opozorilni znaki ECE 70. - Nosilec za okroglo opozorilno luč, vključno z okroglo opozorilno lučjo. - 2 gumijasta odbijača na zadnji strani. - Stopnišče na zadnji desni strani, zložljivo in raztegljivo (brez podesta). - 1 odprta škatla iz luknjane pločevine, nameščena prečno v smeri vožnje, približno 600 x 450 x 2.430 mm, pocinkana, za osmi. Barvanje: - Čelna stena: RAL 3002, karminsko rdeča. - Podvozje: vročo pocinkano. - Zunanji okvir: vročo pocinkano + RAL 3002, karminsko rdeča. - Osrednja palica: RAL 3002, karminsko rdeča. - Nosilec petega kolesa (SSV): aluminij, eloksirano. - Zaščita pred podvozjem: bela (RAL 9016, prometno bela). - Dodatni deli: pocinkani/KTL črni. - Platišča: srebrna. Konturna oznaka: popolna, rumena. Vključno z dodatno opremo. Prva os je dvigljiva, z popolnoma avtomatskim dvigom, ki se prilagaja obremenitvi. 10 parov žepov za palice v zunanjem okviru, enakomerno razporejenih. 4 vrste žepov za palice prečno na površino nakladanja. 20 palic iz pocinkane cevi 80/50, skupna dolžina približno 1.200 mm. Na notranji strani čelne stene predal za 20 palic. 5 x 25 mm stranske plošče in zadnja plošča iz eloksiranih aluminijastih profilov, zložljive in odstranljive, odstranljive Kinnegrip palice. Predal za stranske plošče in palice: pod podvozjem na levi in desni strani, vodila za stranske plošče

Stanje: novo, največja dovoljena obremenitev: 35.510 kg, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Celoten nabor naših vozil, ki so na voljo takoj ali v kratkem roku, najdete na naši spletni strani. Izvleček opreme. Celoten opis opreme na zahtevo. Podvozje: * Varjena konstrukcija iz visokokakovostnih jeklenih profilov s prebojnimi prečkami, zasnovana za visoko točkovno obremenitev. Spodnji nos za zaščito, širina približno 700 mm, zunanji okvir kot UNP-profil, drsna plošča približno 8 mm, višina na vratu spredaj približno 130 mm. Vlečna oprema: * 2-palčni kraljevski zatič (Kingpin) Zaščita pred spodvajanjem: * privijačena izvedba, v skladu z EU standardi Stranska zaščita: * po EU standardih, iz aluminijastih eloksiranih profilov Stojala: * 2 x 12 t podporne noge s kompenzacijsko nogo in enostranskim upravljanjem na FR desni Preme: * 3 x 9 t zračno vzmeteni agregati, proizvajalec SAF, kolutne zavore 22,5'' * Skupni hod približno 180 mm, dviganje in spuščanje s krožnim ventilom Zavorni sistem: Nedpfx Aezhd Ncsfaowk * Dvocevni zračni zavorni sistem v skladu z EU, z EBS in RSS, samodejna regulacija v skladu z obremenitvijo, parkirna zavora preko vzmeti, varovani spojni nastavki trdno nameščeni na čelnem nosilcu, brez povezave z vlečnim vozilom Pnevmatike: * 6-krat, 385/55 R22,5 160J na jeklenih platiščih 11,75 x 22,5 ET 120, proizvajalec po naši izbiri * Nadzor tlaka v pnevmatikah (TPMS) prek CAN-bus sistema EBS Blatniki: * po EU standardih Nosilec rezervnega kolesa: * brez Zavarovanje tovora: * 9 parov zložljivih pritrdilnih obročev, enakomerno razporejenih, natezna sila približno 5,0 t * 9 parov zložljivih pritrdilnih obročev, enakomerno razporejenih, natezna sila približno 2,0 t * V zunanjem okviru na približno vsakih 400–600 mm odprtine za vpenjanje pritrdilnih trakov Prednja stena: * Ojačana jeklena konstrukcija, fiksna, približno 1.400 mm visoka * Notranje obložena s približno 9 mm vezano ploščo (približno 1.250 mm visoka) Tla: * približno 28 mm pod iz tropskega trdega lesa, nameščena v zunanji okvir z vroče pocinkanimi jeklenimi omega profili Razsvetljava: * po EU standardih, 24 V, večkomorni žarometi, LED stranske označevalne luči, LED pozicijske luči spredaj, LED obrisne luči zadaj, luč za registrsko tablico * LED sistem ohranjanja smeri vožnje * 1x15- in 2x7-polni priključki na čelnem nosilcu Oprema: * Opozorilne table ECE 70 * Nosilec za rotacijsko (opozorilno) luč, vključno z rotacijsko lučjo * Zadnja desna vzpenjalna lestev, zložljiva in izvlečna (brez podesta) * 1 odprta škatla iz perforirane pločevine, prečno nameščena, približno 600 x 450 x 2430 mm, pocinkana, za osemi Barvanje: * Prednja stena: RAL 5010 encijan modra * Podvozje: vroče pocinkano * Zunanji okvir: vroče pocinkan + RAL 5010 encijan modra * Srednje stebričke: RAL 5010 encijan modra * Stranska zaščita: eloksiran aluminij * Zaščita pred spodvajanjem: bela (RAL 9016 prometno bela) * Priključki: pocinkani/KTL črni * Platišča: srebrna Dodatna oprema: * Prva os dvižna, s popolnoma avtomatskim, od obremenitve odvisnim sistemom dvigovanja * 10 parov žepov za stebričke v zunanjem okviru, enakomerno razporejenih * 4 vrste žepov za stebričke čez tovorno površino * 20 kosov stebričkov iz pocinkanih cevi 80/50, skupna dolžina približno 1.200 mm * Znotraj prednje stene nosilec za 20 vstavnih stebričkov * 5 x 25-delne stranske in zadnje stranice iz eloksiranih aluminijastih votlih profilov, preklopne in odstranljive, odstranljivi stebrički * Magazin za stranice pod šasijo levo in desno * Vlečne tirnice za stranice * Zaklepi zabojnikov za 1 x 40' in 2 x 20' kontejner, v ravnini z

Stanje: novo, največja dovoljena obremenitev: 32.155 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle stock, with immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete equipment details on request. Chassis: * Welded construction made from high-quality steel profiles with punched cross-members. Designed for high point loads. Coupling Device: * Fifth wheel plate with 2-inch kingpin. Underrun Protection: * In accordance with EC regulations, bolted design. Side Protection: * In accordance with EC regulations. Landing Legs: * 2 x 12 t landing legs with compensating foot and single-side operation (right side in driving direction). Axles: * 3 x 9 t air-suspension axle assemblies, SAF make, with disc brakes approx. 430 x 45 mm, centrally aligned wheel connection ET120, ABS, total air suspension lift approx. 180 mm (lift approx. 110 mm, lower approx. 70 mm). * Air suspension control via manual regulator with stop function. Steering: * Last axle steered automatically by rod linkage. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Brake System: * Dual-circuit compressed air brake system in accordance with EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, swap-proof coupling heads fixed to the front cross member, without connecting line to the truck. * Manufacturer: Wabco. Tyres: * 6 x, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 rims – brand of our choice. Incl. tyre pressure monitoring, tyre pressure display in driver’s cab (pre-installed by chassis manufacturer). Mudguards: * In accordance with EC, 1/4 PVC fenders in front of and behind the axle assembly. Load Securing: * 9 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 8.0 t each). * 8 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 2.5 t each). * On the outer frame, holes every approx. 500 mm for lashing straps (lashing straps can be hooked in with side boards closed; chamfered outer frame). Stanchion Pockets: * 10 pairs of stanchion sockets on the outer frame, evenly distributed. * 4 rows of stanchion sockets across the loading area. * Plug-in stanchions: 20 pieces, galvanized pipe approx. 80/50 mm, total length approx. 1,000 mm. Njdpfx Afoy Auhzsaswk * Rack inside front wall for 20 plug-in stanchions. Front Wall: * Reinforced steel construction, fixed, lined inside with approx. 9 mm phenolic plywood (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor fitted into the outer frame. Sideboards: * 4 x 250 mm side boards and rear wall made from anodized aluminium hollow profiles, folding down and removable, removable Kinnegrip stanchions. * Sideboard and stanchion magazine: under the chassis. * Insertion rails for sideboards and stanchions on left and right. Lighting System: * In accordance with EC, 24 volt with multi-chamber lamps, LED side marker lamps, LED position lights front white, LED contour lights rear, number plate lights. * 1 x 15-pin and 2 x 7-pin socket connectors on front cross member. Equipment: * Wheel chocks with double holder. * Warning signs according to ECE 70. * Work spotlight on lamp bracket (actuated via reverse gear). * Bracket for beacon at rear, including beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paintwork: * Chassis and front wall cleaned by sandblasting, primed and top-coated in single colour. * Chassis: hot-dip galvanized + RAL colour of your choice. * Front wall: RAL colour of your choice. * Sideboards: anod

Stanje: novo, največja dovoljena obremenitev: 39.070 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from specifications. Complete specification available upon request. Chassis: * Welded construction made of high-quality steel profiles with punched cross-members. Designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling Device: * 2-inch kingpin (also suitable for 3.5-inch reception) Underride Guard: * In accordance with EC regulations, bolted design Side Impact Protection: * In accordance with EC regulations Landing Legs: * 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S foot Axles: * 3 x 9 t air suspension axle assembly, manufacturer: SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted 10-hole wheels, offset 120 mm, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via rotary valve with locking function, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted on lifting/lowering device bracket * Smartboard/TIM/Infocenter, no TPMS display Lift Axle: * First axle liftable, fully automatic load-dependent lift control, starting aid via button in the cab (15-pin socket PIN12). Button in cab is not included in delivery Nsdpfoyz E T Sjx Afaswk Brake System: * Two-line compressed air brake system according to EC guidelines with EBS and RSS, automatic load-sensing, spring-loaded cylinders as parking brake, non-reversible coupling heads fixed to front cross-member, without connecting line to motor vehicle, Wabco brand Tyres: * 6-fold, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand of our choice), offset 120 mm * Basic version tyre pressure monitoring, connected to the EBS CAN bus system * Tyre pressure display in the cab (pre-installed by tractor manufacturer) Mudguards: * In accordance with EC, PVC mudguards (semi-shell) over all axles * Mud flaps with anti-spray Load Securing: * 8 pairs of welded hook plates in the outer frame (tensile strength approx. 3 t) * 6 pairs of lashing rings on the sides of the outer frame, evenly distributed (tensile strength approx. 10 t) Stake Sockets/Posts: * 5 pairs of stake sockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake sockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 removable posts made of galvanized square tubing, approx. 80 x 80 x 4 mm, stop at bottom Front Wall: * Bolted front wall, approx. 1,200 mm high, panelled with sheet metal Stake Magazine: * Magazine for removable posts inside front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting System: * EC-compliant, 24 volt with multi-chamber lights, LED side marker lights, LED front position lights white, LED rear outline marker lights, license plate lights * 1x15-pin and 2x7-pin sockets on the front cross-member Equipment: * Warning panel according to ECE 70 * 2 LED work lights on lamp bracket (switched via reverse gear) * Bracket for revolving beacon at rear (including beacon) * 1 rear access ladder, foldable and extendable (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of front wall * Smartboard with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the support legs (switched via revers

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and short-term available units on our website. Extract from the equipment. Complete equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with continuous cross members, designed for high point loads * Underrun beam approx. 700 mm wide * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm * Neck height at the front approx. 130 mm Coupling Equipment * 2-inch king pin Underrun Protection * Bolted version according to EC regulations Side Impact Protection * According to EC regulations, made from anodised aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating pads and single-side operation on the right (FR) Axles * 3 x 9 t air suspension axles with disc brakes, 22.5" * Total lift approx. 180 mm * Lifting and lowering device via rotary valve Brake System * Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-actuated cylinders as parking brake * Reversible coupling heads, fixed to the front cross member, without connecting line to the tractor unit Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120, manufacturer at our discretion * Tyre pressure monitoring (TPMS) via EBS CAN-bus system Mudguards * According to EC regulations Spare Wheel Carrier None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.0 t * In the outer frame, boreholes every approx. 400–600 mm for attaching lashing straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into the outer frame with galvanised omega steel profiles Lighting System * According to EC regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights white front * LED outline lights rear * Licence plate lights * Lane marker lights, LED * 1x15- and 2x7-pin plug sockets at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning signs * Bracket for rotating beacon, incl. rotating beacon * 2 rear rubber buffer stops * Access ladder rear right, foldable and extendable (without platform) * 1 open perforated box transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: single-colour RAL as per request * Chassis: hot-dip galvanised * Outer frame: hot-dip galvanised + single-colour RAL as per request * Centre stanchions: single-colour RAL as per request * Side underrun protection: aluminium, anodised * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised/KTL black * Rims: silver Contour Marking * Complete, yellow Including Special Accessories * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets transverse to the loading area * 20 stanchions made of galvanised tube 80/50, overall length approx. 1,200 mm Nodpfjw U H Sbox Afaowk * Internal magazine for 20 plug-in stanchions on the front wall * 5 x 25 sideboards and tailboard made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Sideboard and stanchion magazine: insertion

Stanje: rabljeno, lastna masa: 14.100 kg, največja dovoljena obremenitev: 33.900 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/1999, vzmetenje: zrak, velikost pnevmatike: 235/75 17,5, stanje pnevmatik: 50 odstotek, barva: zelen, Leto izdelave: 1999, velikost sprednje pnevmatike: 235/75 17,5, velikost zadnje pnevmatike: 235/75 17,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, registracija tovornjaka, Reference number for inquiries: 68575 Nooteboom, Euro standard * Year of manufacture: 1999 * ABS (Anti-lock Braking System) * Air suspension * Suspension type: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload capacity: 33,900 kg * Permissible gross weight: 48,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 50% -- 50%, tire size: 235/75 R17.5 Nwjdpfx Ajyibz Rofajk * Tire condition, 2nd axle: 40% -- 40%, tire size: 235/75 R17.5 * Tire condition, 3rd axle: 50% -- 50%, tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Body manufacturer: ES-GE * 3rd axle hydraulically forced-steered * Extendable up to 9,950 mm * Telescopic extension defective * Loading platform length: 10,990 mm Disclaimer: Specifications subject to change, prior sale, and errors excepted. More images and videos are available on our website. Our comprehensive service portfolio includes: * Purchase, sale, and rental of commercial vehicles * Fast and straightforward financing solutions * Processing of all (export) documents * Ordering of export and customs license plates * Vehicle preparation: new tarpaulins, signage, resprays, etc. * Professional loading and load securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained specialist staff; we are happy to advise you.

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * Profil PT 30: ----Zavore: * EBS (električni zavorni sistem) * Naprava za hitro sprostitev zavor za vzmetne akumulatorje * Bobnaste zavore ----Osi: * 3 x 11 ton, osi Gigant ----Vzmetenje: * Zračno vzmetenje s sistemom za dvigovanje in spuščanje ter ventilom RtR ----Povezava: * Povezava dolžine 1.200 mm s 40 mm vlačilnim ušesom in nastavitvijo višine s pomočjo vzmetne palice in objemke ----Elektrika / osvetlitev: * Pametna plošča, nameščena na prikolici, kot informacijsko orodje (za prikaz obremenitve osi – ločeno spredaj in zadaj) * Nadzor tlaka v pnevmatikah z možnostjo prikaza v tovornjaku prek signala EBS, brez dodatne namestitve v tovornjaku * 15-polni električni vtič * LED-osvetlitev 12 / 24 V * LED-rotacijska svetilka (odstranljiva) zadaj ----Splošni dodatni deli: * Stranski zaščitni element * Stranske podpore zadaj na okvirju * Mehansko nastavljivi paketi opozorilnih tabel spredaj in zadaj * Sprednji plastični četrtni blatniki z zaščito proti brizganju * Zadnji ravni jekleni ploščati ščiti z zaščito proti brizganju * Orodjarna škatla iz pocinkane jeklene pločevine, približno 650 x 300 x 600 mm, črna, prašno lakirana, na desni strani * Predal v podvozi za dodatno opremo s pokrovom, 2 kosa kontinentalskih zapah, trajno vgrajen (neposredno za podvozjem) * 2 kosa stopnic, pocinkanih, na podvozju, levo in desno ----Površina nizkega prikolice: * ROBOTER: varjena protidrsna prevleka na jekleni plošči podvozja (izstopajoči varjeni robovi) ----Varnostno pripenjanje tovora (paket za pripenjanje tovora, sestavljen iz): * 2 pritrdilne točke (13,4 tone) spredaj levo in desno na nosilcu čelne stene * Spredaj in zadaj 1 par UVV prstenov (13,4 tone), poleg tega stransko po 3 pare UVV prstenov (10 ton), z možnostjo nagibanja in spuščanja, obremenljivi v vse smeri in vgrajeni v zunanji okvir * Stransko po 3 žepe za pasove z možnostjo pripenjanja 2 ton * Profifix palica za pripenjanje v vzdolžni osi na sredini, v ravni površini za možnost pripenjanja do LC 3000 daN ----Razširitev: * 6 parov mehanskih iztegnih podpor za 3 m skupne širine (vendar ne na zadnji poševnici) * Razširitvene deske, položene v sredini tovorne površine ----Rampe: * hidr. enodelne rampe, približno 3.000 x 720 mm * mehansko, stransko nastavljive * Krmilni blok 4-na, za poznejšo vgradnjo hidravlične premika rampe ----Nosilec za bager: * Nosilec za bager čez zadnjo os, neprekinjen do končnega nosilca (skupna dolžina približno 2.100 mm) * 2 para pritrdilnih točk LC 6400 daN v nosilcu za bager, stransko v vzdolžnem okvirju Nwjdpfx Afjxptn Roask ----Višina nakladanja: * obremenjen približno 910 mm +/- 20 mm zračno vzmetenje ----Lakiranje: * Podvozje, podvozje, iztegnine, podpore in rampe so vroče pocinkani * Osi, vrtljivi obroč, rezervoar za zrak, vlečna vilica so pobarvane v črni barvi ----Informacije: * Novo vozilo z garancijo proizvajalca * Napake in vmesna prodaja so pridržane ----Čas dostave: * dobavljivo od približno 45. tedna leta 2026

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * Profil PT 30: ----Zavore: * EBS (električni zavorni sistem) * Naprava za izpustitev zavor v sili za vzmetne zavorne cilindre * Bobnaste zavore ----Osi: * 3 x 11 ton, osi Gigant ----Vzmetenje: * Zračno vzmetenje z dvigom in spuščanjem ter ventilom RtR ----Povezava vlečnega vozila: * Povezava vlečnega vozila dolžine 1.200 mm s 40 mm vtičnico in nastavitvijo višine s pomočjo vzmetne povezave in zapornice ----Elektrika / osvetlitev: * Pametna plošča, nameščena na prikolici kot informacijski prikazovalnik (za prikaz obremenitve osi - ločeno spredaj in zadaj) * Nadzor tlaka v pnevmatikah z možnostjo prikaza v vozilu prek signala EBS brez dodatne namestitve v vozilu * 15-polni vtič * LED osvetlitev 12 / 24 V * LED rotacijska svetilka (odstranljiva) zadaj ----Splošni dodatni deli: * Stranska zaščita pred trčenjem * Podpirala na zadnji strani okvirja * Mehansko nastavljivi paketi opozorilnih tablic spredaj in zadaj * Sprednji plastični blatniki * Zadnji ravni jekleni zaščitni paneli * Orodjarna škatla iz pocinkane jeklene pločevine, približno 650 x 300 x 600 mm, črna, barvana s praškom, na desni strani * Škatla v podvoju za dodatke s pokrovom, 2 varnostni ključavnici, trajno vgrajeni (neposredno za platformo podvoja) * 2 stopnici, pocinkani, na podvoju, levo in desno Nedpfx Aetplwisfajwk ----Površina nizkonadvozne prikolice: * Varjena protidrsna površina ROBOTER na jekleni plošči podvoja (izstopajoče varjene brazde) ----Varovanje tovora (paket za varovanje tovora, sestavljen iz): * 2 pritrdilne točke (13,4 tone) spredaj levo in desno na nosilcu čelne stene * 1 par UVV pritrdilnih obročev (13,4 tone) spredaj in zadaj ter na vsaki strani 3 pari UVV pritrdilnih obročev (10 ton), vrtljivi in spustljivi, obremenljivi v vse smeri in vgrajeni v zunanji okvir * Na vsaki strani 3 žepov za pritrditev z istočasno možnostjo pritrditve z 2 tonami * Profifix letve za pritrditev v vzdolžni osi na sredini, v ravni površini za možnost pritrditve do 3000 daN ----Širitev: * 6 parov mehanskih iztegnih rok za 3 metre skupne širine (vendar ne na zadnji strani) * Plošče za širitev, položene na sredino tovorne površine ----Rampe: * Hidravlične, enodelne rampe, približno 3.000 x 720 mm * Mehansko, stransko nastavljive * Blok za upravljanje s 4 izhodi za poznejšo nadgradnjo hidravličnega premika ramp ----Nosilec za bager: * Nosilec za bager, ki se razteza čez zadnjo os do končnega nosilca (skupna dolžina približno 2.100 mm) * 2 para pritrdilnih točk, 6400 daN, na nosilcu za bager, na strani v vzdolžnem okvirju ----Višina tovorne površine: * obremenjeno približno 910 mm +/- 20 mm, zračno vzmetenje ----Barvanje: * Okvir, podvozje, iztegni roki, podpirala in rampe so vroče pocinkani * Osi, vrtilni obroč, zračni rezervoar, vlečna prikolica so pobarvani v črni barvi ----Informacije: * Novo vozilo z garancijo proizvajalca * Napake in medprodaja pod pridržkom ----Dobavni rok: * dostavljivo od približno 45. tedna 2026

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear Nwsdpjhlz S Njfx Afask • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 9.000 kg, največja dovoljena obremenitev: 29.000 kg, skupna masa: 38.000 kg, prva registracija: 08/2020, barva: rdeča, Leto izdelave: 2020, ES-GE 2-Axle Lowbed Trailer, non-telescopic, Tridec Steering Gross Vehicle Weight: 38,000 kg Axle Load (2 x 10,000 kg): 20,000 kg Fifth Wheel Load: 18,000 kg Unladen Weight +/- Manufacturer Tolerance: approx. 9,000 kg Payload: approx. 29,000 kg Total Length: approx. 13,650 mm Total Width: approx. 2,540 mm Loading Platform Length: approx. 13,200 mm Loading Platform Width: approx. 2,540 mm Front Overhang: approx. 1,200 mm Front Radius: approx. 1,750 mm Kingpin Swing Clearance: approx. 2,100 mm Fifth Wheel Height: approx. 1,150 mm B-Dimension: approx. 12,000 mm Raised Platform Length: approx. 3,700 mm Deck Height, Raised Platform: approx. 1,480 mm Lowbed Length: approx. 6,500 mm Deck Height, Lowbed: approx. 250 mm Ground Clearance, Lowbed: approx. 100 mm Deck Height over Axle Assembly: approx. 3,000 mm Tractor Unit Specification A-Dimension: approx. 4,500 mm Fifth Wheel Height: approx. 1,150 mm Kingpin Swing Clearance: approx. 2,100 mm Chassis: - Frame made from high-grade fine-grain steel - Lowbed in rigid design - Axle assembly not detachable - Without excavator boom recess King Pin - 2-inch kingpin Landing Gear - Without front landing legs Axles - 2 x 10,000 kg axles (17.5"), technically rated at 12,000 kg each - Manufacturer: Gigant - Enclosed drum brakes, asbestos-free brake linings - Automatic slack adjusters, central alignment - Axle spacing approx. 1,360 mm Suspension - Air suspension with raise and lower function - 2nd ride height for air suspension (+ approx. 30 mm) Steering - Hydraulic axle kingpin steering - All axles steered, brand "Tridec" Tyres - 9 x 245/70 R 17.5 tyres, load index 146/146 F - Manufacturer: Continental - Steel rims Brakes - Dual-circuit air brake system in accordance with EU directives, Manufacturer: "Knorr" - Automatic load-dependent braking force regulator - Standard air couplings red/yellow, per ISO 1726 - Electronic brake system, "EBS", 7-pin socket per ISO 7638, mounted on front in line with EU requirements. With ABS 4S/2M - With RSS (Roll Stability Support) - Parking brake via spring actuators - 4 wheel chocks with holders - Without flexible connection hoses (Wendeflex) to tractor unit - Air tanks made of aluminium - TIMG2 (Trailer Information Module) mounted for reading current axle loads Underrun Protection - Integrated into rear closure panel Side Frame - Side frame made from UNP steel approx. 200 mm Load Securing - 13 lashing points per side with 13,400 kg lashing capacity, foldable outward, mounted on outer frame - 1 pair of lashing rings with approx. 13,400 kg lashing force at the rear of the gooseneck, approx. 400 mm above ground - 1 pair of lashing rings with approx. 13,400 kg lashing force at the rear vertical end of the lowbed - 7 stake pockets per side on inner side of the outer frame for stakes approximately 80x50x4 mm, evenly distributed along the full length of the load platform - 6 stake pockets per side, welded on the exterior of the longitudinal beams Flooring - Approx. 28 mm hardwood floor with Omega profiles, fitted between the longitudinal beams - Checker plate (approx. 8/10 mm) over axle assembly Njdpfxsu U Np To Afaowk Front Wall - Designed as a storage box with lid, approx. D 400 x H 450 mm, over the entire width of the loading platform, with chamfered corners Side Walls - 3 removable anodised side walls on the gooseneck, approx. 2,440 x 400 mm - Removable galvanised stanchions at the rear Galvanizing - All steel parts shot-blasted - Chassis spray-galvanized Paintwork - Primer and sin

Stanje: novo, največja dovoljena obremenitev: 56.570 kg, skupna masa: 66.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Extract from the equipment features – full specifications available upon request. Chassis: - Chassis frame construction made of welded longitudinal beams and pass-through cross members - Rear under-run bar approx. 700 mm wide - Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal beams - Cross member spacing max. 400 mm (for longitudinally laid floor) - King pin 3.5 inch according to SAE standard, replaceable - Outer frame as UNP 200, open to the outside Landing Gear: - 24 t telescopic landing gear JOST -MODUL CH (Heavy Duty) S-foot Axles: - 4 x 10 t SAF axles with large drum brake - 22.5 single tires - Axle distances approx. 1,700/1,810/1,810 mm - Air suspension unit, each with 10 t lifting capacity, lifting and lowering device with 1 rotary slide valve Knorr/Wabco - Holder for lifting and lowering device, bolted version Brake: - Smartboard/TIM/Infocenter at the lifting/lowering gear bracket, in addition to the lift/lower valve, without battery (operable only with towing vehicle) - Holder for light and brake at the front, mounted on the underrun bar, total height approx. 700 mm - Tire pressure monitoring basic version, connected to the EBS CAN bus system - With dual release valve for brake and spring actuator - Test nipple for brake cylinder pressure at right front brake cylinder - 1 red and 1 yellow coupling head each - Lifting/lowering device mounted in driving direction rear left - EBS braking system Wabco make, CAN bus EBS diagnostics (EBS plug), no diagnostic cable led outside! Tires: - 8 x 445/65 R 22.5 premium brand tires of our choice - Central centering Lubrication: - Grease nipple strips at the bogies and at the steering front. No central lubrication Superstructure: - Without body certificate according to DIN EN 12642 XL - 2x LED work lights on top of the front wall (facing rear), switch at the lift/lower bracket - Front wall for platform, reinforced version - Side contour marking yellow, rear yellow - Front wall approx. 800 mm high, with sheet metal cladding, bolted version Lighting: - 2x LED work lights, mounted in lamp panel, switched via reverse gear - 2x LED work lights, switched via reverse gear, 1 each side near landing gear - 2x LED reversing lights, 1 per side in front of the 1st axle - Lighting/wiring system brand of our choice - Number plate lighting - The towing vehicle must provide sufficient electrical capacity for the chosen lighting (esp. reversing light) - Position marker lights at the front, lower, white, 1 per side left and right (LED) - 24V lighting system with large multifunction rear lamp - Side marker lights (LED) flashing - 1x 15-pin and 2x 7-pin sockets in multifunction box at the front - EBS socket output - 1 pair lane keeping lights (LED) Floor: - Hardwood floor approx. 28 mm, alternating with galvanized omega steel profiles Paint/Coating (no metallic shades): - Chassis painted in RAL color of choice - Front wall (steel construction) in RAL color of choice - Axle hubs matching chassis color - Axles and landing gear black - Wheels in aluminum/silver similar to RAL 9006 - Wheel nuts untreated - Under-run protection painted RAL 9010 pure white (aluminum) Accessories: - Lifting device for 1st axle Nsdpfowx Dctjx Afaewk - 9 welded lashing plate hooks per side in the outer frame, lashing capacity max. 3,000 daN each - 12 RUD-SLP lashing points per side with

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3 ESPOS, lastna masa: 8.010 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 350.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 8.000 kg, dovoljena osna obremenitev (os 2): 8.000 kg, dovoljena osna obremenitev (os 3): 8.000 kg, prva registracija: 05/2025, naslednji pregled (TÜV): 05/2026, dolžina tovornega prostora: 13.520 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 2.692 mm, prostornina tovornega prostora: 90,48 m³, skupna dolžina: 13.600 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, stanje pnevmatik: 90 odstotek, barva: bela, Leto izdelave: 2025, Oprema: ABS, Drsno dno s stranskimi vrati za bočno nalaganje !!!!! Nodpfxozhmbzo Afaswk

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2021, naslednji pregled (TÜV): 12/2026, skupna dolžina: 10.020 mm, skupna širina: 2.550 mm, skupna višina: 3.500 mm, Oprema: ABS, Teže * Dovoljena skupna teža: 36.000 kg * Dovoljena osna obremenitev: 24.000 kg (tehnično 27.000 kg) * Obremenitev sedelne prikolice: 12.000 kg * Prazna teža: približno 8.560 kg Dimenzije * Višina sedelne prikolice: približno 1.150 mm * Skupna širina: približno 2.550 mm * Skupna dolžina: približno 10.000 mm * Višina valja, naprava: približno 1.350 mm Splošno * Naša vozila so zasnovana in izdelana za najvišje zahteve v transportu, odlaganju/na odlagališču in v kmetijstvu. Z dolgoletnimi izkušnjami vam zagotavljamo robustno vozilo z dolgo življenjsko dobo. Jekleni okvir * Ojačan okvir, varjena jeklena konstrukcija iz vzdolžnih in prečnih nosilcev, izdelana iz visokokakovostnega jekla. * Z nosilcem za pritrditev nadstavka za odlaganje tovora. * 2-palčni kraljevi vijak, privit in zamenljiv, 2 položaja. * Sedelna plošča z nadstavkom (glejte spodaj). Osi/vzmetenje * Osi blagovne znamke z minimalnim vzdrževanjem, 3 x 9.000 kg, kolutne zavore. * Proizvajalec osi: SAF. * Vključno z zračnim vzmetenjem z napravo za dvig in spuščanje. * A-os kot dvižna os z dvostranskim dvigom. * Osna razdalja: 1.320 mm / 1.320 mm. Zavorna sistema * Zavorna sistema z dvema vodoma, odvisna od obremenitve, v skladu z direktivo EG 71/320 (WABCO). * Avtomatski regulator zavorne sile, odvisen od obremenitve. * EBS, elektronski zavorni sistem. * SmartBoard, vključno z informacijskim centrom. * Parkirna zavora v izvajanju s vzmetjo. * Avtomatsko spuščanje pri aktivaciji hidravličnega sistema. * Napajanje preko varnih priključkov spredaj (napajalni kabel ni vključen). Pnevmatike * 6 pnevmatik 385/65 R 22,5, blagovna znamka po izbiri proizvajalca, nameščene na aluminijastih platiščih Alcoa Durabright. Opore * 2 x 10 t dvižne opore z upravljanjem na eni strani, 2 hitrosti. Njdpfjzthhgsx Afaewk Nadgradnja Nadgradnja za odlaganje tovora v izvajanju s podaljšanim roko * Tip: S25-6400 * Višina kljuke: 1.570 mm, po standardu DIN 30722 * Višina valja: približno 1.350 mm * Za dolžino posode znotraj: min. 4.750 mm do 7.000 mm * Dvigalna/nagibna moč: 25.000 kg * Nagibni kot: 51 stopinj * Podatki in dimenzije: po standardu DIN 30722 * Delovni tlak: največ 350 bar Dodatna oprema * Hidravlična notranja zapora. * Upravljanje ControllerPlus, vključno s pokrovom blokov upravljanja, vključno z zaslonom. * Brezžični daljinski upravljalnik, vključno s držalom in polnilno postajo, zaslon za hitro diagnozo. * Softstop, mehko spuščanje. * Softslide, gladko premikanje posode. * Ročno upravljanje kot rezervna možnost. * Avtomatsko spuščanje zračnega vzmetenja ob aktivaciji hidravličnega sistema (spuščanje zračnega vzmetenja na telo osi C). * Montaža na okvir šasije, podaljšana roka je nameščena med vzdolžnimi nosilci. Nadgradnja/sedelna plošča * Nadgradnja s fiksno sprednjo steno in zložljivimi stranskimi aluminijastimi stranicami, zadnja stranica je vstavljiva. * Leseno dno iz plošč, obdelanih s sitotiskom, privito in zatesnjeno. * Pritrdilne točke na zunanjem okviru za pritrditev tovora. Osvetljava * 24 Volt, v skladu s StVZO, z LED zadnjimi lučmi, nameščene čim višje, kot je tehnično mogoče. * Vključno z meglenko in lučjo za vzvratno vožnjo. * Po 2 luči za označevanje spredaj in zadaj. * Na vsaki strani 4 označevalne luči. * Priključek spredaj prek 15-polnega vtičnice po standardih DIN ISO 1185 in DIN 3731. * 2 dodatni reflektorji za vzvratno vožnjo. * 4 dodatni delovni reflektorji, vključeni prek meglenke. Dodatni deli * 2 x klini za podstavljanje s držali. * 6 kosov plastičnih blatnikov (2 x s ščitni

Stanje: novo, številka stroja/vozila: Produktpalette, lastna masa: 4.100 kg, Dodatne informacije Okvir Jeklena varjena konstrukcija iz drobnozrnatega jekla, vroče pocinkana, ravna platforma brez robne povišave, naklon nakladalne površine za zadnjo osjo cca. 8° navzdol. Vzdolžni nosilci iz jeklenih profilov, jekleni okvir vroče pocinkan, z NIRO-pločevino na pregibu kot vodilo za vrv – poravnano s tlemi. Za tovornjak z medosno razdaljo: 2. os 5.100 mm / 2. do 3. os 1.350 mm Vlečna kljuka Vlečna kljuka s kroglasto glavo D24,8, vlečna nosilnost 2.800 kg, vključno z montažo in elektriko s 7-polnim vtičem. Dodatna oprema/predelave 2 nosilca za zagozde, bočna zaščita iz aluminija, zložljiva – prevzeto s tovornjaka! Zaščita proti podvozu iz jekla, blatniki s četrtino školjke in blatnimi loputami – prevzeto s tovornjaka! Nwedpfji Riytjx Afaok Predal za orodje Plastična omara za orodje s predalom in polico, š=650 / v=520 / g=670 mm, zaklepanje z obešanko (ključavnica ni priložena). 1 nosilec za 3 kante za gorivo. 1 nerjaveča omara, š=600/v=400/g=500 mm, s polirano vrati in zaklepanjem, vsebuje krmilni ventil in elektrohidravlično črpalko. Krmilna omarica z okroglo tesnilno letvijo na vratih in tesnilnimi manšetami na zadnji strani (zaščita pred pršenjem vode po tehničnih možnostih). Elektrika Prilagoditev obstoječih zadnjih luči, 2 dodatna LED delovna žarometa, vgrajena v prednjo steno in delujeta prek stikala na levi strani prednje stene s položajem na pozicijskih lučeh, 1 LED delovni žaromet zadaj z integrirano vzvratno kamero, vključno z barvnim ravnim monitorjem, zaslonom z nosilcem na prisesek in napajanjem prek 24 V, napetostni razdelilnik 24/12V, 1 vtičnica 7-polna 12V = adapter. Talna površina Mega Grip iz zobatih pocinkanih rešetk, jeklene rešetke 50/4 z mrežo 50 mm, zgornja stran z nedrsečim profilom, položeno po celotni glavni platformi. Privezne točke 12 parov vrtljivih priveznih obročev v zunanjem okviru – vsak po 10 t. 1 naprej in zadnji povsem zadaj. 1 točka v sredini zadaj za pritrditev viteljske vrvi. 12 priveznih točk vgrajenih v sredini tal – vsaka 5 t. Prednja stena Prednja stena iz jeklene pločevine, višina 1.500 mm. Fiksna z vogalnimi stebri (višina sprednje stene). Na levi in desni strani vsak po 12 obešalnih kavljev za verige. Vitel Električni vitel, 24 V, vlečna sila ca. 6.350 kg, nameščen centralno ob prednji steni, upravljanje z brezžičnim daljincem, dolžina vrvi min. 35 m x 9,5 mm, z navojnim vodilom, s pritiskalno ploščo, vključno z zaščito proti preobremenitvi, prosto prestavno sklopko, ročni daljinski upravljalnik z približno 5 m kabelsko ročico, izjava o skladnosti, inženirsko poročilo, servisna knjižica, uporabniška navodila. Rampi za nalaganje Dolžina 3.500 mm – dvodelna (2.000 mm + 1.500 mm), širina 850 mm, nosilnost 20.000 kg / par, elektrohidravlično zložljiva in bočno pomična – vključno z elektrohidravlično črpalko. Nagib za nalaganje ca. 8° pri spuščeni zadnji osi. Podlaga ramp iz vroče pocinkanih jeklenih rešetk z nedrsečim profilom. Rampi možni premik do cca. 170 mm, hidravlični razteg ramp. Pripravljeno za uporabo s polno nosilnostjo na nakladalni rampi. Zaklepanje ramp z dvema pritrdilnima trakovoma. Konica rampe znižana (nos min. 150 mm) za uporabo na nakladalnih rampah. Oznake za upravljanje ramp. Ventil za spust rampe. Podpore Nastavljive podporne noge, zadaj zložljive in nastavljive po dolžini, ojačana izvedba (tekst se tu zaradi dolžine zaključi, lahko nadaljujem ob potrebi)

Stanje: rabljeno, največja dovoljena obremenitev: 26.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/1994, dolžina tovornega prostora: 13.030 mm, širina tovornega prostora: 2.600 mm, skupna širina: 2.600 mm, skupna višina: 4.000 mm, Ladebett: 8620 mm, Schräge hinten: 450 mm, Breite: 2600 mm, Breite: 3111 mm mit Verbreiterung, ausziehbare und/oder klappbare Verbreiterungen, Schwanenhals: 3960 mm, Ladehöhe Bett: ca. 880 mm, hydraulisch seitlich verschiebbare Auffahrrampen (LxB) 2900 x 830 mm, elektrische Hydraulikpumpe, Kabelfernbedienung, 2 x Schwerlast-Zurringe je Seite, 5 x Rungenstecktaschen je Seite, ausziehbare Warntafeln, Zentralschmieranlage, Stützwinden, drei Achsen hydraulisch zwangsgelenkt, Trommelbremsanlage, Luftfederung, Rundumkennleuchte, Rückfahrscheinwerfer, Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein. SI85616 Nwedpfx Afjw Sb Sqoajk Unser Angebot ist generell ohne neue TÜV-Abnahme. Falls neue TÜV-Abnahme erwünscht, unterbreiten wir Ihnen gerne ein Angebot unserer Partnerwerkstätten! Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein. Es gelten unsere allgemeinen Liefer- und Zahlungsbedingungen. Gerne erstellen wir Ihnen für dieses Objekt ein Finanzierungs- oder Leasingangebot. Bitte sprechen Sie uns an!

Stanje: novo, največja dovoljena obremenitev: 28.600 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2025, Braking System: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * 22.5" disc brakes * Paver brake with shortened rear mudguards and manual paver switch Nwsdpsw Eg D Tefx Afaek ----Axle: * 3 x 9 t BPW or SAF axles * Lifting axle with start-up aid ----Suspension: * Air suspension with automatic lowering during tipping process (to increase stability, can be deactivated for paver operation) ----Electrics / Lighting: * Tyre pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * Eco-LED II lighting with protective housing * 1 x additional LED work light * Flashing side marker lights ----General Attachments: * Aluminium air tanks * Telescopic steel landing legs with plate foot (can only be uncoupled when unladen) * 4 m aluminium access ladder, positioned to the right side above the mudguards * Enclosed individual plastic mudguards * Folding underrun protection * Tow eye at the rear * Folding access ladder on the front left side * Document box on the front wall ----Chassis: * High chassis frame made of high-strength fine-grain steel with Meiller-specific torsion cross members ----Tipping Body: * Half-shell rear tipper body made of STEELECT 450 steel -HBW 450- * Front hydraulic cylinder with medium working pressure * Front wall with 600 mm front roof as tarpaulin carrier * Side walls with sturdy, continuous, inward-sloping top rail * Overlapping tailgate with rubber seal, 2 additional toggle locks and automatic 2-hook locking ----Thickness of Floor, Side Walls, Front and Rear Wall: * Front, side and rear wall 4 mm * Front and rear wall inclined * Tailored floor 5 / 6 mm ----Tarpaulin: * Electric sliding tarpaulin -RAL 9006 white aluminium- with manual switch on chassis and radio remote control ----Payload Volume: * Approx. 25 m³ ----Coupling Height: * Unladen approx. 1,350 mm * Laden approx. 1,340 mm ----Paintwork: * Chassis painted in RAL 7021 black grey * Tipping body in RAL 9006 white aluminium ----General Attachments: * --Technically feasible gross vehicle weight of 39,000 kg-- * Errors and prior sale excepted * New vehicle with manufacturer warranty ----Delivery Time: * Available immediately from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 31.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2007, Oprema: ABS, * Inquiries welcome via WhatsApp * Trailer for interchangeable compactors * Manufacturer: H&W * Model: HWDCSS39 * Disc brakes * ABS Nwedohy R Swspfx Afajk * Lift axle * Steering axle * Hydraulic extension cylinder * 4 x container locks (twistlocks) * Unladen weight: 7,200 kg * Tyres: 385/55R22.5 approx. 80-70-80% tread * German vehicle * New price: 73,000 EUR * Net sales within the EU will only be carried out with VAT deposit and proof of registration in the destination country (confirmation of arrival required). * Sale exclusively to businesses. This offer is non-binding and subject to prior sale. Errors and intermediate sale reserved. * No guarantee for input errors. Transport to port possible. * Viewing by appointment only. Contact via WhatsApp.

Stanje: novo, lastna masa: 9.800 kg, največja dovoljena obremenitev: 39.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 9.800 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with a front frame dip and flat loading platform featuring a rear bevel approx. 500x100 mm - Frame neck 200 mm with chamfered corners at the front - Sloped swan neck end approx. 500 x 100 mm (with anti-slip profile strips on outer frame in the area behind the rear bevel) - 2 king pin positions with replaceable 2” king pin - Outer frame closed to the outside and designed as perforated outer frame - Loading platform with extendable central frame, extendable by around 2,000 mm, lockable in 500 mm increments pneumatically - Frame with 80x80 mm step at and after extension joint - Reinforced frame design / maximum point load when retracted at center of gravity - Without extendible load platform outriggers, but pre-fabricated to allow retrofit (= guide tubes welded in frame) - With excavator trough (no cover), approx. 220 mm deep, 600 mm wide, starting behind 2nd axle to vehicle end - 1 pair of wheel wells between 1st and 2nd axles, covered with steel plates (covers with Körapur coating), approx. 400 mm deep - Rear underrun protection = extended rear plate - Drop-down supports at the rear Ramps: - 2 two-piece loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only with electro-hydraulic unit) - Width approx. 800 mm Njdpfxexgm S Dj Afaewk - Wooden surfacing - Including anti-slip strips on ramps - Can be locked in transport position with tie-down straps - Operated by control lever mounted on rear right in frame - Hydraulically laterally adjustable Floor: - 35 mm larch wood floor with aluminium omega profiles Landing legs: - Mechanical 24-ton landing legs with single-sided operation and compensating device Axles, steering and tires: - BPW air suspension axles, each with 10-ton axle load, air bellows diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering system with total lift approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired through EBS), automatic control, with manual override button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center offset by center bore - 12 tires, 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Insertable side and rear stakeboards on the swan neck, approx. 400 mm high - Spare wheel carrier - Side aluminium underrun protection - 4 chocks - 1 plug-in ECE rear warning board - 11 pairs of ZK modules 10t, lateral: - 2x on the swan neck - 2x on loading area before extension - 7x after extension - Extendable warning signs including 3 position lamps each, at the front on landing legs and rear before the rear plate, steplessly extendable up to 4,500 mm loading width - 4 plug-in sockets for warning signs in stake pockets on the loading platform - 6 pairs of stake pockets laterally for 100x50 mm stakes - 2 cross rows stake pockets for 100x50 mm stakes on swan neck, from outer frame to main frame (1x before/1x after king pin positions) - 3 cross rows stake pockets for 100x50 mm stakes on loading area from outer frame to main frame (1x before the extension, 1x after extension, 1x after the 3rd axle) - 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle equalization ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via draw spring and turnbuckle Nwjdpfxjl Th I Ae Afaek ----Lighting / Electrics: * RDÜ tire pressure monitoring * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable rotating beacon * 15-pin power connector ----General Attachments: * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: closed plastic mudguards; Rear: straight galvanized steel skirts, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Four stake pockets per side (stakes not included), also suitable for lashing ----Load Securing (La-Si package consists of): * 2 lashing eyes (6.4 t) front left & right on main frame of the bogie platform * 6 pairs of UVV-certified lashing rings, foldable and lowerable, loadable in all directions, recessed into the outer frame * Corner load capacity 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for max. overall width of 3 meters (except at the sloped rear) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * 4-way valve block for retrofit hydraulic lateral ramp shift ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (including 860 mm drive-on slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Info: * Permissible gross weight technically up to 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: Immediately available from Egestorf

Stanje: rabljeno, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, Za vsako rabljeno polpriklopno vozilo prejmete aktualno in popolno poročilo o pregledu ter delovanju. Podvozje: -Stabilna varjena jeklena konstrukcija okvirja z dvignjenim sprednjim delom in ravno nakladalno površino z zadnjim poševnim zaključkom približno 500x100 mm -Vrat okvirja višine 200 mm z zaobljenimi vogali -Poševni zaključek "grbine" (Schwanenhals) približno 500 x 100 mm (dvižni rebrasti profili na zunanjem okvirju za zadnjim poševnim delom) -2 mesti za king pin z zamenljivim 2'' king pinom -Zunanji okvir zaprt navzven z luknjami za privezovanje z napenjalnimi trakovi (pritrditev s verigami ni možna) -Ojačana izvedba okvirja / točkovna obremenitev v težišču -Priprava za izvlečne razširitve v nakladalni površini -Z bagrskim izrezom (brez pokrova), globina približno 220 mm, širina približno 600 mm, začne se za 2. osjo in poteka do zadka vozila -1 par blatniških izrezov pred osjo z jeklenimi pokrovi (pokrovi prevlečeni s premazi Körapur), globina približno 400 mm, ter še 1 par med 1. in 2. osjo z jeklenimi pokrovi -Zaščita pred podvozjem = podaljšana končna plošča -Podporne noge zadaj Rampi: -Dvodelne nakladalne rampe posebne izvedbe z mehanskim podaljšanjem -Dolžina približno 2.850 mm plus 1.850 mm, z hidravličnim dvigalom (samo v kombinaciji z elektrohidravličnim agregatom) -Širina približno 800 mm -Lesena površina -Vključene dvižne rebraste plošče na nakladalnih rampah -V transportnem položaju z možnostjo pritrditve z napenjalnimi trakovi -Upravljanje prek ročice, nameščene zadaj desno v smeri vožnje -Stransko hidravlično pomične Tla: -35 mm tla iz macesnovega lesa z aluminijastimi Omega profili Podporne dvigala: -Mehanske podporne dvigala 24 t s stranskim upravljanjem in izravnavo potiska Osovine, krmiljenje, pnevmatike: -BPW zračno vzmetene osi, vsaka 10 t dovoljene nosilnosti, premer zračnih mehov 360 mm -Zavore z Z-kamnom 300/200 mm, obloge brez azbesta -Avtomatski napenjalec zavornih palic -Dvigovanje in spuščanje s skupnim hodom približno 200 mm -2. položaj za vožnjo z dodatkom krogličnega ventila +50 mm -1. os dvižna os (preko EBS sistema), avtomatsko potrjevanje s mehanskim ročnim upravljanjem na priklopniku -3. os z obračalno osjo z električnim in mehanskim zaklepom -12 jeklenih platišč, 10 lukenj, z natančno namestitvijo na sredino -12 pnevmatik 245/70 R 17,5 143/141J, brez zračnic -Vključno s sistemom za nadzor tlaka v pnevmatikah Dodatna oprema: -Na grbi (Schwanenhals) snemljive bočne in zadnje stranice višine približno 400 mm -Nosilec za rezervno kolo -Bočna aluminijasta zaščita pred udarci -4 podložni zagozdi s pritrditvijo -Podaljšani nosilec za registrsko tablico na končni plošči -1 ECE tablica zadaj, snemljiva Nwedpezdzrtsfx Afaok -11 parov ZK modulov 10 t ob strani: -2x na grbi -9x na nakladalni površini -Izvlečne opozorilne table, vključno s po 3 pozicijskimi lučmi, spredaj na podpornikih za prikolico in zadaj pred končno ploščo, brezstopenjsko izvlečne do nakladalne širine 4.500 mm -4 nosilci za opozorilne table, vstavljivi v žepe na nakladalni površini -6 parov bočnih žepov za stebre 100x50 mm -2 prečni žepi za stebre 100x50 mm na grbi (zunanjega okvirja do glavnega okvirja; 1x pred in 1x za položaj king pina) -3 prečni žepi za stebre 100x50 mm na nakladalni površini (1x spredaj, 1x pred 1. osjo, 1x za 3. osjo) -2 para jeklenih plošč na nakladalni površini za priklop kontejnerjev 1x 20ft -Gumijasta zavesa montirana na zaščito pred podvozjem

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system, including RtR valve ----Electrics / Lighting: Nedpfx Aey Ngzyjfaswk * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swivel supports at the rear of the chassis * Straight pressed steel fenders * Spare wheel holder under the chassis, right side ----Low Loader Deck: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board plug-in, 150 mm high * Rear slope on fifth wheel platform to low-bed approx. 700 mm long * Fifth wheel platform with 50 mm timber planks, low-bed deck with 60 mm timber planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to a total width of 3 meters (not on rear slope; extension planks available with storage on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings on each side, plus 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t lashing rings, pivotable and lowerable, recessed in the outer frame * 2 x 6.4 t lashing eyes per side, plus 1 lashing ring at the excavator arm rest * 2 x container locks directly after the neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm rest from end of last fixed axle over steering axle to end crossbeam, with internal reinforcements, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanical one-piece hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * Outer board on ramp made from 50 mm hardwood * Climbing strips on outer frame of ramp and on approach slope * Rubber matting on ramp and approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump performance in the truck between 40 l/min and 120 l/min) ----Loading Dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Coating: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support legs, air tanks painted in a black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included with the offered vehicle ----Delivery time: * available from c

Stanje: novo, največja dovoljena obremenitev: 28.600 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Zavora: * Wabco EBS-E / ABS (elektronski zavorni sistem z RSS) * Nujno sproščanje za valj z vzmetno silo * Kolutne zavore 22,5" Nwedpfx Ajxxf Tqjfaok * Položajna zavora s skrajšanimi zadnjimi blatniki in ročnim stikalom za zaključek ----Premi: * 3 x 9 t BPW ali SAF – premi (odvisno od razpoložljivosti) * Dvižna os z zagonsko pomočjo ----Vzmetenje: * Zračno vzmetenje z avtomatskim spuščanjem med dvigovanjem kesona (za povečanje stabilnosti, možno izključiti pri prekrivanju stropov) ----Elektrika / razsvetljava: * Sistem za nadzor tlaka v pnevmatikah (TPMS) * 1 x 15-polna priključna vtičnica za priklop * Eco-LED II osvetlitev s streho za zaščito * 1 x dodatna LED delovna luč * Utripajoče bočne označevalne luči ----Splošna dodatna oprema: * Aluminijasti zračni rezervoar * Teleskopske jeklene nosilne noge s ploščatimi podstavki (možno spustiti le pri praznem vozilu) * 4 m aluminijasta lestev, pritrjena desno ob blatniku * Zaprti plastični posamezni blatniki * Preklopna bočna zaščita pod vozilom * Vlečna kljuka zadaj * Zložljiva vstopna lestev spredaj levo * Škatla za dokumente na čelni steni ----Okvir: * Visok podvozni okvir iz visoko trdnega finezrnatega jekla z Meiller torzijskimi prečniki ----Kiparska nadgradnja: * Polkrožna zadnja kiper korita iz jekla STEELECT 450 -HBW 450- * Čelna stena s 600 mm streho kot nosilec ponjave * Bočne stene z močno -v celoti potekajočo- navznoter nagnjeno zgornjo ojačitvijo ----Debelina dna, stranic, čelne in zadnje stene: * Čelna, bočni in zadnja stena 4 mm * Čelna in zadnja stena nagnjeni * Tailored dno 5/6 mm ----Hidravlični cilinder: * Prednji hidravlični cilinder s srednjim delovnim tlakom ----Hidravlična zadnja stena: * Prilegajoča in nihajoča hidravlična zadnja stena. Upravljanje zadnje stene preko mehanske krogelne pipe ----Ponjava: * Električna drsna ponjava -RAL 9006 bela aluminijasta- z ročnim stikalom na podvozju in daljinskim upravljalnikom ----Nakladalna prostornina: * pribl. 25 m³ ----Višina priklopa: * naložen pribl. 1.350 mm * obremenjen pribl. 1.340 mm ----Barva: * Barvanje podvozja v RAL 7021 črno-siva * Kiper nadgradnja v RAL 9006 bela aluminijasta ----Splošne informacije: * --Tehnično dovoljeno skupno težo 39.000 kg-- * Napake in vmesna prodaja pridržane * Novo vozilo z garancijo proizvajalca ----Rok dobave: * dobava od 37. tedna 2026

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle hydraulically steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) Nedpfxol Tnvgs Afaswk * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED flashing beacon, rear left ----General attachments: * Side underrun protection * Landing gears in the front and mechanical swing supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted on the chassis, right-hand side ----Low-loader platform: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, width = 2,480 mm x height = 500 mm x length = 665 mm, with folding lid * 400 mm high aluminum sideboards (RAL 9010 pure white) on both sides of the fifth wheel platform, foldable and removable * Rear wall – 150 mm high, slotted in * Rear slope on the fifth wheel platform down to the low-bed area, approx. 700 mm long * Fifth wheel platform fitted with 50 mm wooden planks, low-bed area with 60 mm wooden planks * Tread plate above the axles ----Width extensions: * 8 x mechanical folding width extensions to a total width of 3 m, except in the rear slope area (extension planks available with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load securing (lashing package): * On the fifth wheel platform, 2 x 6.3 t lashing eyes each as well as 3 x 5 t lashing bars on each side in the outer frame * In the low-bed area, 2 x 13.4 t lashing rings on each side as well as 4 x 10 t lashing rings, swiveling and retractable, integrated into the outer frame * 2 x 6.4 t lashing eyes on each side and 1 lashing eye at the rear in the excavator trough * 2 x container locks directly after the kick-up section in the low-bed platform ----Excavator trough: * Excavator trough from end of last rigid axle over steering axle up to the end brace, continuous, with internal reinforcement profile, approx. L = 2,450 mm x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer board of the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacities in the truck from over 40 l to 120 l/min) ----Loading dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Coupling height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered v