Wörmann Bauhl119.62/247 Rampen nakup rabljenega (508)

Stanje: rabljeno, največja dovoljena obremenitev: 5.250 kg, skupna masa: 5.250 kg, konfiguracija osi: 2 osi, prva registracija: 02/2018, dolžina tovornega prostora: 4.000 mm, Št. int.: B - 10 Po naročilu stranke Blohmenröhr * Tristranski kiper * Dvoosna prikolica * Nakladalne rampe * Nastavljiva vlečna ojla Csdpfx Aoxvf Szol Herb * Dovoljena skupna masa 5250 kg * Nosilnost cca 2250 kg * Zelo dobro stanje Možnost vračila starega vozila Financiranje od 3,99 % Napake in vmesna prodaja pridržane! Podatki v tem oglasu so neobvezujoči opisi in niso zagotovljene lastnosti. Prodajalec ne prevzema odgovornosti za napake pri vnosu ali prenosu podatkov. Oprema, navedena v oglasu, je treba posebej preveriti. Vse informacije v oglasu so neobvezujoče! Dostava po celotni Nemčiji na povpraševanje Delovni čas: ponedeljek do četrtek od 9:00 do 17:00 petek od 9:00 do 14:00 in po dogovoru!!!

Stanje: rabljeno, največja dovoljena obremenitev: 2.000 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 08/2016, naslednji pregled (TÜV): 11/2025, Leto izdelave: 2016, Oprema: ABS, SARIS TRAILER WITH 2-AXLE LOW LOADER WITH RAMP, TÜV VALID UNTIL 11/2025 ----VEHICLE FEATURES Crjdsuidc Rspfx Al Hjb * TYPE: C2C * 2 AXLES * DRUM BRAKES * ADJUSTABLE RAMP * PERFECTLY SUITABLE FOR MINI EXCAVATORS, FORKLIFTS, ETC. * 4 M LONG * PERMISSIBLE TOTAL WEIGHT: 3,500 KG * UNLADEN WEIGHT: 1,500 KG * PAYLOAD: 2,000 KG * TIRE SIZE: 185 / 70 R13 * TÜV: 11 / 2025 * EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 - €2,000) ----EXPORT DECLARATION / CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5-DAY, 30-DAY PLATES, AND 17–21-DAY AUSTRIA PLATES (EURO 1 DOCUMENT) VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and non-EU countries, a deposit of at least €500.00 / €1,000.00 is required. Subject to change, error, and prior sale! You can find more vehicles on our website. Sales are exclusively according to our General Terms and Conditions—see website. Important Notice—Important Information: Despite careful verification of all details in our offer, errors may occur. Some can result from transmission issues with platform providers’ systems. Therefore, please note that all information is given without guarantee and does not constitute a legal claim. Legal Notice: This sales listing does not constitute an offer under §145 BGB (German Civil Code). It is provided as information to initiate a contract. The details provided are without guarantee and do not represent warranted characteristics.

Stanje: novo, lastna masa: 810 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 2.970 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 370 mm, 100% Made in Germany Custom Order Vehicle!!! Standard Equipment: - Tandem rubber suspension axles, each rated at 1,500 kg - Body width: 1,500 mm - Body length: 2,970 mm - Fixed ball-type tow coupling – ball center approx. 430 mm height - 4x tires 185 R14C - 2x mudguards (NATO style) - Shock absorbers rated for 100 km/h - Automatic jockey wheel - 2x galvanized wheel chocks - Body exterior fully painted in 2K paint, color as desired Crjdpfx Aowk D Duel Hsb - 18 mm industrial birch plywood anti-slip floor - Stainless steel tie-down hooks on side, front, and rear walls - Pendulum tailgate - 4 lashing points on the sides - Tipping device with hand pump, hydraulic cylinder, and tipping bearing - Integrated 12V/13-pin lighting system with interior light - TÜV inspection for new vehicles - Electric pump with battery installed under loading surface, in splashproof box with emergency hand pump - 2x aluminum loading ramps - Aluminum checker plate rail covers Base frame constructed as a tub from 3 mm steel plate, fully welded with cross tubes and corner posts (60x60 mm), fully welded. All parts hot-dip galvanized. 18 mm industrial-grade full birch plywood floor. Mudguards made from 2 mm steel plate, hot-dip galvanized and fully walkable.

Stanje: rabljeno, največja dovoljena obremenitev: 18.000 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/1991, dolžina tovornega prostora: 8.200 mm, širina tovornega prostora: 2.500 mm, Oprema: ABS, * ABS * BPW axles ----Superstructure: Low-loader trailer (2200+6000 mm), loading height approx. 900 mm, rear end tapered, drive-on height approx. 750 mm, steel/wood floor, extendable to 3 m width, spring-assisted loading ramps, lashing rings. Sale only to traders. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, PARTICULARLY REGARDING EQUIPMENT AND ACCESSORIES. All purchase contracts, invoices, pro forma invoices, orders, and sales discussions are subject to our General Terms and Conditions (see imprint for details). Crsdpfxowdb Tte Al Hsb

Stanje: rabljeno, največja dovoljena obremenitev: 24.640 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/1993, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.500 mm, ? Hidravlične podporne noge ? Kolesne vdolbine ? 3 žepki za stebričke na vsaki strani ? 4 pritrdilne ušesce na vsaki strani ? Hidravlične rampe ? Bobnasta zavora ? Zračno vzmetenje Crjdpfxexuykie Al Hob ? Dvojna pnevmatika ? SAF osi Vse informacije brez garancije / Vmesna prodaja pridržana.

Stanje: novo, lastna masa: 14.350 kg, največja dovoljena obremenitev: 53.450 kg, skupna masa: 67.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Gooseneck: - Gooseneck in SNT design for optimization of loading bed length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Loading bed: - Extendable loading bed, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° - A recess in the loading bed and the chamfered section for receiving the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-part steel ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 215 mm inwards - 'Super Grip' 25 mm rubber flooring and approx. 5 mm steel plate as additional reinforcement on the rear chamfer of the loading bed - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: - BPW axles and suspension, 1st axle steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire sensors fitted on all wheels, including spares Surface treatment: - Complete steel structure automatically blasted with shot blasting system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection - Final painting with 2 layers of 2K top coat, single colour in MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, with the exception of hydraulic winches - 1 spare wheel - Outer carrier on the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings in the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - On top of the gooseneck, approx. 40 mm thick hardwood flooring, above kingpin area with checker plate cover - 2" kingpin - Round NATO socket on front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member Cjdpeya E A Nofx Al Herb - 8 pairs of recessed, fold-out lashing rings in the outer frame of the loading bed - Extendable (galvanized) widenings by approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, in front of the axles fully open up to gooseneck cross beam, approx. 700 x 410 mm - Wheel recesses with square climbing bars, 15 x 15 mm, between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for wheel recesses, which can also be used as bridging elements for the extension or as widening boards - 1 pair mechanical rear supports - Radio and cable remote control - Lift axle on front axle - Square climbing bars 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Braking system by WABCO EBS-E according to EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Entire steel structure automatically blast cleaned with shot blasting after welding Csdpsmfqi Isfx Al Hsrb Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rims in silver-grey Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed 1 movable intermediate table for the extension tube with large cross-section Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring

Stanje: rabljeno, lastna masa: 6.340 kg, največja dovoljena obremenitev: 23.660 kg, skupna masa: 30.000 kg, prva registracija: 03/1979, dolžina tovornega prostora: 8.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 920 mm, vzmetenje: jeklo, velikost pnevmatike: 8.25R15, barva: zelen, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, listnato vzmetenje, 3 osi, SAF osi, vrtljiva mizica, pritrdilni obroči, hidravlične rampe, zadnja podpora, dvojne pnevmatike Nadgradnja: 3-osna nizkopodna prikolica s hidravličnimi nakladalnimi rampami, 3x 10t osi SAF, bobnaste zavore! Dolžina rampe cca 2250 mm! Nakladalna višina cca 920 mm! PODATKI O OPREMI SO BREZ JAMSTVA, pridržujemo si pravico do sprememb, vmesne prodaje in napak! Cedpow Tm Itsfx Al Horb

Stanje: novo, največja dovoljena obremenitev: 2.100 kg, skupna masa: 3.000 kg, dolžina tovornega prostora: 3.100 mm, širina tovornega prostora: 1.760 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, Buy online and save at trailer-shop Many models available online at ANHÄNGERWIRTZ Convenient online shopping 24/7 Pick up yourself or have it delivered. The online pickup market for your new trailer offers leading brand manufacturers! Over 850 new trailers in stock Over 130 used trailers always available. Non-binding example: order and pick up directly from our showroom Saris Tipper 3 SKS 310 176 40cm Steel Sides HD, Electric Emergency Pump, Aluminium Ramps, Supports, 3000kg, 100km/h Crjdpfx Asw H D Ixsl Hob Three-way tipper heavy duty series, steel floor 310 176 3000 2 HDS E 310x176x40cm 3000kg tandem high-loader chassis with shock absorbers, 100km/h approved, V-drawbar, 40cm galvanized steel side panels with cam lock tailgate, electrohydraulic tipper with emergency pump, 4 lashing eyes right and left, aluminium loading ramps 250cm with hook profile, telescopic rear supports, automatic heavy duty jockey wheel.... only while stocks last! Invoice incl. VAT. Warranty – Trailer dealer for over 34 years Sales & telephone orders at the following times: MON - FRI 08:00 - 12:30 & 14:00 - 18:00 or order around the clock via our online shop at trailer-shop de Colour and rear ramp may vary Copyright – Trademark protection 08/25 Article no.: Article no.: 99K3HDS0206

Stanje: rabljeno, prevoženi kilometri: 326.416 km, moč: 160 kW (217,54 KM), prva registracija: 04/2009, vrsta goriva: dizel, lastna masa: 4.950 kg, največja dovoljena obremenitev: 2.570 kg, skupna masa: 7.490 kg, konfiguracija osi: 4x2, medosna razdalja: 4.820 mm, gorivo: dizel, zavore: stalna plinska ročica, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: parabolično listje (vzmet), število sedežev: 2, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.500 mm, Oprema: ABS, filter saj, garancija za rabljena vozila, greljenje sedeža, kabina, klimatska naprava, meglenke, nadzor oprijema, računalnik na krovu, sistem za imobilizacijo, spojka prikolice, zapora diferenciala, * German vehicle * Car transporter from first ownership * Complete service history (fully documented maintenance) * Fully enclosed with long electric loading ramps * Ideal for sports cars and lowered vehicles * Perfect for prototype transportation due to opaque enclosure * Edscha sliding tarpaulins left and right * Electrically operated, movable winch with remote control * Tow hitch (ball head) with 24V and 12V sockets * Air conditioning * 6-speed manual transmission Codpfsvhpbhox Al Horb * Electric windows * Electrically adjustable, heated mirrors * Electric engine brake * On-board computer * Internal dimensions: length 7.20 m x 2.50 m x 2.50 m * Gross vehicle weight: 7,490 kg * Payload: 2,260 kg * Upgradable to 8,600 kg gross vehicle weight without technical modifications * Front axle load: 4,000 kg * Rear axle load: 6,200 kg * Wheelbase: 4.82 m * ABS and ASR (traction control) Should a new TÜV inspection be desired, we are happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. Further trucks can be found on our website at We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer inspection and examination of the vehicle to prevent any misunderstandings regarding its condition and suitability. Inspection and testing can be arranged at any time by appointment and are expressly encouraged. All specifications are provided without guarantee. We do not accept liability for errors or incorrect information in this offer. The buyer is required to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale, changes, and errors.

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Braking system: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension of 250 mm for a total length of 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck cab via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V Credporwc R Rofx Al Hsb * EBS multi-voltage system for tractors with 12 and 24 V electrics ----General attachments: * Landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low-bed loading area: * 50 mm softwood floor * Pre-equipment in front of the bulkhead for subsequent installation of container locks * Bolted 400 mm bulkhead made of smooth sheet * Rear stakes bolted * Drop sides with spring-assisted lifting mechanism ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optional installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing point in each of the front and rear corners * Various drill holes in the front and rear cross members for 1.2 t lashing options * Profifix lashing rail along the centre longitudinal axis, for lashing up to LC 3,000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (collapsible to 20 mm spacing) * Hydraulic flow divider in the trailer (when hydraulic pump output in truck exceeds 40 l/min, max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical rear supports and ramps hot-dip galvanized * Axles, springs, air tanks, landing gear and flange eye painted in black * Drop sides painted in RAL 9010 pure white * Side walls available painted in any RAL colour for an additional charge ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Available from approx. week 16/2026

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with raising/lowering system and RtR valve * Manometer pressure display for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Reflective contour markings on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) * Tow bar with 50 mm towing eye and height adjustment * Tool box made of galvanized steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOTER-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing ring front left & right in front of bulkhead support, 4 mounting holes per side in the turntable platform each with 2 t lashing capacity, 1 pair of 13.4 t lashing rings suspended at rear left & right before the rear cross member, 4 pairs of 10 t UVV lashing rings per side, swiveling and lowerable, loadable in all directions and recessed into side frame, 3 stake pockets per side with 2 t lashing option each * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not on the rear slope) * Timber plank holder for width extensions under the chassis, longitudinal left * Excavator arm rest above rear axle up to end plate, approx. 2,100 mm long and 190 mm deep, 2 pairs of 6.4 t lashing rings per side in the excavator arm rest * Hardwood flooring on the running surfaces of the low-loader platform * Hydraulically operated single-piece ramps (approx. 3,000 x 720 mm), mechanically adjustable width * Ramp outer planks made of hardwood * Steel construction prepped for 6-way control sliders * Unladen loading height approx. 950 mm +/- 20 mm (chassis) Codpfx Alsl Tlhro Hsrb * Turntable, folding outriggers, mechanical support legs, ramps are hot-dip galvanized * -- Axles, air tanks, tow bar painted black -- * Tyres 235/75 R 17.5 * Vehicle registered for one day in 07/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, lastna masa: 757 kg, največja dovoljena obremenitev: 2.743 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 3.300 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, 3.30 m x 1.80 m x 0.30 m 3,500 kg gross weight, 757 kg unladen weight, 2,743 kg payload Codpfxowwv Tzo Al Hjrb Commercial jockey wheel Ramps & supports

Stanje: novo, lastna masa: 1.020 kg, največja dovoljena obremenitev: 2.480 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 406 mm, širina tovornega prostora: 200 mm, višina nakladalnega prostora: 30 mm, EDUARD 3-way tipper 406x200x30cm 3500kg, electric & manual pump incl. ramps & supports Cjdpfxewwv Avj Al Hjrb 4020-4-3O3-3563-P

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Braking system: * EBS (Electronic Braking System) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: Credsrwc R Aepfx Al Hjb * Tyre pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Support winch at the front * Foldable external support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Prepared in front of bulkhead for retrofitting container locks * Bolted 400 mm bulkhead of smooth steel plate * Bolted rear posts * Side boards with spring assist ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing brackets every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various drilled holes in bulkhead and rear cross member for 1.2 t lashing points * Profifix lashing rail, centrally along longitudinal axis, for load securing up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps approx. 2,750 x 600 mm (can be retracted to 20 mm clearance) * Hydraulic flow divider in trailer (for hydraulic pump output in the truck of over 40 L/min to a max. of 140 L/min) ----Painting: * Chassis, drawbar, bulkhead, mechanical drop-down supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange drawbar eye painted black * Drop sides painted in RAL 9010 pure white * Side panels painted in RAL colour of choice at extra cost ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images ----Delivery time: * Available from approx. week 16/2026

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering function as well as return-to-ride valve * Pressure gauge for axle load determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panels front and rear * Front axle: plastic quarter mudguards with spray guards * Rear axle: straight, galvanized steel side skirts with spray guards * Reflective contour marking tape, side and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable rear LED beacon * 2 LED reverse lights (controlled by reverse gear) Cedpfol Tnu Aex Al Horb * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front section ahead of turntable platform approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the steel plate of the turntable platform * Load securing package consisting of: 1 x 13.4 t UVV lashing eye left & right in front of front bulkhead support, 4 holes per side in the turntable platform for 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the end support, 4 pairs per side of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and recessed in the outer frame, 3 stake pockets per side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical fold-out outriggers for 3 m overall width (not in the rear slope) * Plank holder for extensions mounted longitudinally under the chassis on the left * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, with 2 pairs per side of 6.4 t lashing eyes in the excavator arm rest * Hardwood floor on the running surfaces of the low bed platform * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer boards of the loading ramps made of hardwood * Steel construction prepared for 6-valve control block * Loading edge unladen approx. 950 mm +/- 20 mm chassis * Turntable, fold-out outriggers, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, and drawbar painted in black shade-- * Tires 235/75 R 17.5 * The vehicle has a day registration from 07/2024, due to the lack of a tire pressure monitoring system, and has not been loaded or used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, konfiguracija osi: 3 osi, skupna masa: 32.000 kg, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, emisijski razred: Euro 6, barva: bela, Leto izdelave: 2026, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machinery transporter / aerial work platform transporter • FH 500 8x2R • Trailing axle, electro-hydraulically steered, single tires • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • FH long-distance safety cab • Cab parking heater, 2 kW • 33 l refrigerator with freezer compartment, under bunk • Air suspension on front axle(s) • Gearbox / I-Shift operation via driver seat control unit • I-Shift drive modes: Standard, Performance, and Economy • I-See with map-based topography and traffic information • Eco cruise control (cruise control), including brake cruise control • Manual shifting possible in automatic mode (including kickdown) • Adaptive traction control • Adaptive cruise control (ACC) with collision warning and emergency braking function • Lane departure warning system • Side collision avoidance and turning assistant (both sides) • Driver alert system, warns of drowsiness • VEB Volvo Engine Brake • etc. WIESE superstructure for aerial platform and construction machinery transport with hydraulic loading ramps Credpfx Aow Itmrel Heb With 2 pairs of wheel recesses including covers Superstructure dimensions: - Approx. 9,050 mm usable length - External width 2,550 mm - Loading height (top of floor) approx. 1,050 mm unloaded - Robust, weight-optimized steel welded construction, high-volume design - Short crossmember spacing for high point loads - Rear end beveled for low approach angle - Outside frame profile 90° - Front bulkhead reinforced - Storage box inside lower front bulkhead - Grating floor - Designed for 5,000 daN wheel load - Steel storage boxes above the axles and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed in outer frame - Longitudinal beams each with Multi-X contour over whole length with multiple lashing points 2.5 t - 4 lashing eyes 8 t recessed at rear (left/right/center/center) - 4 lashing eyes 8 t recessed in front bulkhead (left/right/center/center) - Outside frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design as 2 individual / telescopic ramps, both ramps are laterally adjustable - Ramp can be used as a loading ramp and as a drive-over ramp for warehouse technology (telescopic section remains closed), the fixed ramp part is laid onto the dock ramp - Sturdy tension bar as transport lock (alternative with belt tensioning) - 2 hydraulic rear supports with plates, with audible warning and control light in cab - Ramp and supports operated via electro-hydraulics - Remote control operation and emergency control at control block - Control block installed in stainless steel toolbox at frame side - Superwinch 8.2 t with approx. 20 m steel cable - Access with handholds left and right for loading area walk-on - 5 stainless steel drawer-type toolboxes, including lighting as optional extra - Side paneling as per sample images (green vehicle), available as option for extra cost - Superstructure coating KTL - Ball head trailer coupling at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of front bulkhead - 4 external LED work lights on frame for area lighting - 2 LED work lights at rear - 1 removable rotating beacon at rear Stock vehicle comes with cab in white and superstructure in nova grey (external frame painted in RAL color of your choice upon request)

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machine transporter / work platform transporter ▪ FH 500 8x2R ▪ Trailing axle, electro-hydraulically steered, single tires ▪ Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle ▪ High-roof long-distance safety cab FH ▪ Cab auxiliary heater, 2 kW ▪ 33 l cool box with freezer compartment, under bunk ▪ Air suspension on front axle(s) ▪ Transmission / I-Shift control via operator panel on driver's seat ▪ I-Shift driving modes: Standard, Performance, and Economy ▪ I-See with map-based topography and traffic information ▪ Eco cruise control (cruise control), including brake cruise control ▪ Manual shifting possible in automatic mode (incl. kickdown), adaptive traction control ▪ Adaptive cruise control (ACC) with collision warning and emergency braking function ▪ Lane keeping assist ▪ Side collision avoidance and turn assist (both sides) ▪ Driver alert system for drowsiness warnings * VEB Volvo Engine Brake * etc. WIESE body for work platform and construction machinery transport with hydraulic loading ramps with 2 pairs of wheel recesses including covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height on upper edge floor approx. 1,050 mm unladen - Robust, weight-optimized steel welded structure, box-type construction - Short crossmember spacings for high point loads - Rear end beveled for low approach angle - External frame profile 90° - Bulkhead in reinforced version - Internal bottom tool box in front of bulkhead - Grating floor - Suitable for wheel loads of up to 5,000 daN - Above the axles: steel plate tool boxes and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into external frame - Longitudinal members with Multi-X profile along the entire length with numerous lashing points, 2.5 t - 4 lashing eyes 8 t recessed at the rear (left/right/center/center) - 4 lashing eyes 8 t recessed at the front bulkhead (left/right/center/center) - External frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design: 2 individual/stretch ramps, both laterally adjustable - Ramps can be used as drive-up ramps or bridging ramps for warehouse technology (stretch section remains closed), fixed ramp section placed on dock ramp - Sturdy tension bar as transport safety (alternatively with strap tensioning) - 2 hydraulic rear supports with footplates, warning buzzer and indicator light in cab - Ramp and support operation via electro-hydraulic system - Control by radio remote or manual emergency controls on switch block - Switch block mounted in stainless steel toolbox on the frame side - Superwinch 8.2 t with approx. 20 m steel cable - Access steps with grab rail on right and left for walking onto loading area - 5 stainless steel drawer-type tool boxes, with optional lighting available at extra cost - Side skirting as shown in sample images (green vehicle), available as an option at extra cost - KTL coating for the superstructure - Spherical trailer hitch at rear, 3.3 t Cedpow Itl Ujfx Al Hjrb - 4 LED work lights - 2 LED reversing lights mounted high on bulkhead - 4 LED work lights externally mounted on the frame for area illumination - 2 LED work lights at the rear - 1 removable rotating beacon at the rear Stock vehicle is supplied with cab color in white and body in nova grey (exterior frame painted in RAL color of y

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machine transporter / work platform transporter • FH 500 8x2R • Trailing axle, electro-hydraulically steered, single tires • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • FH long-distance safety cab Credpfsw Itmlox Al Hsb • Cab auxiliary heater, 2 kW • 33 l coolbox with freezer compartment under bunk • Air suspension on the front axle(s) • Transmission/I-Shift operated via control unit on driver's seat • I-Shift drive modes: Standard, Performance, and Economy • I-See with map-based topographical and traffic data • Eco Cruise Control (cruise control) including brake cruise control • Manual gear selection possible in automatic mode (incl. kickdown) • Adaptive Traction Control • Adaptive Cruise Control (ACC) with collision warning & emergency braking • Lane Keeping Assist • Side collision avoidance & turn assist (both sides) • Driver alertness warning system for fatigue • VEB Volvo Engine Brake • etc. WIESE bodywork for aerial platform and construction machinery transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. wheel recess covers Body dimensions: - Usable length approx. 9,050 mm - External width 2,550 mm - Platform height (top of floor) approx. 1,050 mm unladen - Robust, weight-optimized steel welded construction, box-type design - Short crossmember spacing for high point loads - Rear end beveled for low approach angle - External frame profile 90° - Bulkhead in reinforced design - Internal storage box at bottom in front of bulkhead - Grating floor - Designed for 5,000 daN axle load - Above axles: steel toolboxes & outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 tonnes, flush-mounted in outer frame - Longitudinals each with Multi-X contour along the entire length, many lashing points 2.5 tonnes - 4 lashing eyes 8t at the rear, recessed (left/right/center/center) - 4 lashing eyes 8t at front bulkhead, recessed (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design as 2 individual/split ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or as a drive-over ramp for warehouse technology (sliding part remains closed), fixed ramp section placed on hall ramp - Heavy-duty locking bar for transport security (optional with strap lock) - 2 hydraulic rear supports with plates incl. warning buzzer & indicator light in cab - Ramps and supports operated by electro-hydraulics - Control via radio remote and emergency control at control block - Control block mounted in stainless steel toolbox at side of frame - Superwinch, 8.2 t, with approx. 20 m steel cable - Access steps with handrails left and right for cargo area access - 5 stainless steel drawer-type toolboxes, incl. lighting (option, at extra cost) - Side fairings as per sample images (green vehicle), option at extra cost - Body coating KTL - Rear tow hitch (ball), 3.3t - 4 LED work spotlights - 2 LED rear lights mounted high on bulkhead - 4 LED external work lights on frame for area illumination - 2 LED work lights at rear - 1 removable rotating beacon at rear The stock vehicle is supplied with cab in white and body in nova grey (outer frame painted to RAL color by request).

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * Warning panel packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * LED beacon (removable) on the rear * 24 V 15-pin, plus additional 12 V 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at the front * Straight steel rear mudflaps each with spray suppression (splash suppression) * Side underrun protection * Extended drop member by 500 mm to the front * Turntable platform extended by 520 mm at the front with 45° corners and 3 integrated lockable storage compartments incl. lids * Chassis made of high-strength fine-grain steel * Floor over turntable platform: 50 mm, low-loader platform: 60 mm softwood * Outer planks of the loading ramps made of 50 mm bamboo wood * Four stake pockets per side (stakes not included), each with 2 t lashing capability * Load securing package includes: 2 lashing eyes 6.4 t front left and right on main turntable frame, side front and rear each 1 pair 13.4 t lashing rings on outer frame, 4 pairs per side 10 t swiveling and lowerable lashing rings loadable from all directions recessed in outer frame, 2 pairs 6.4 t lashing rings on each side in the excavator arm rest, 8 pairs galvanized folding outriggers for 3 meter total width (not at the rear bevel) * Widening planks stowed in a compartment on the left side * Excavator arm rest above the rear axle to end of approach ramp approx. 2,300 x 740 x 190 mm Csdjrczm Djpfx Al Hjrb * Mechanical drop supports at the rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift via sliding pipe from ramp shaft * Loading area over slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach ramp) * Chassis, turntable, loading ramps, mechanical folding supports rear hot-dip galvanized * Axles, springs, air reservoir and slewing ring painted in black tone * New vehicle with manufacturer's warranty * Errors and interim sale reserved * Available from CW 21 / 2026

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation, front and rear * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon, rear * 24 V – 15-pin and additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting Csdel Th Evjpfx Al Hsrb * Straight drawbar with 40 mm towing eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design, mounted right side * Closed single plastic mudguards front * Rear straight steel mud flaps each with spray suppression * Lateral underrun protection * Extended offset crank by 500 mm to the front * Turntable platform front section extended by 520 mm with 45° corners and 3 integrated, lockable storage compartments with lids * Chassis made from high-strength fine-grained steel * Flooring over turntable platform made of 50 mm softwood, and in lowbed platform from 60 mm softwood * Outer boards of access ramps made of 50 mm bamboo * Four stake pockets per side (stakes not included), each with 2 t lashing point capacity * Lashing package consisting of: 2 lashing eyes 6.4 t on main frame of turntable platform (front left and right); 1 pair of 13.4 t lashing rings per side front and rear on outer frame; 4 pairs per side of 10 t pivoting and lowerable lashing rings, loadable in all directions, recessed in outer frame; 2 pairs of 6.4 t lashing rings on each side in the excavator arm recess; 8 pairs galvanized folding markers for 3 m overall width (not on rear slope) * Extension planks stored in left-side compartment * Excavator arm recess above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports rear * Hydraulic, hot-dip galvanized access ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp adjustment via sliding tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded loading height approx. 860 mm (includes 860 mm approach slope) * Chassis, turntable, loading ramps, mechanical folding supports rear hot-dip galvanized * Axles, springs, air tanks and turntable painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from week 21/2026

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Cjdpetvfkfjfx Al Hjrb Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: rabljeno, lastna masa: 10.000 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Chassis: - Sturdy steel frame weldment with front frame camber and level loading platform, rear tapered edge approx. 500x100 mm - Neck 200 mm with beveled front corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outwards as a hole-type external frame - Load deck with extendable center frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame in front of and behind the division with 80x80 mm step - Reinforced frame version / point load in retracted position at center of gravity - With excavator trough (without covering), approx. 220 mm deep, approx. 600 mm wide, starting after 2nd axle to end of vehicle - 1 pair wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm Ramps: - 2 pieces 2-part loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting unit (only in combination with electro-hydraulic unit) - Width approx. 800 mm - Wood covering - Incl. traction ribs on loading ramps - Lockable in transport position with lashing straps - Operation by control lever mounted at rear right in frame - Laterally hydraulically adjustable Flooring: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift and lowering device with total lift approx. 200 mm - 2nd driving height via ball valve +50 mm - 1st axle liftable (wired via EBS), automatic activation with mechanical emergency operation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centrally aligned offset - 12 tyres, 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel carrier - Lateral aluminum underrun protection - 4 wheel chocks with holders - Long license plate holder on end cross member - 1 ECE sign insertable at rear - 11 pairs of 10t lashing modules on the side: - 2x on the gooseneck - 2x on the deck before extension - 7x after extension - Pull-out warning signs incl. 3 position lamps each, front at landing gear and rear before end cross member, continuously extendable up to deck width of 4,500 mm - 4 mountings for warning signs to be inserted into stake pockets on the deck - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm Crodpfx Asxxl E Hsl Heb - 2 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inwards to main frame (1x before, 1x after king pin positions) - 3 rows of crosswise stake pockets for plug-in stakes 100x50 mm on deck from outer frame inwards to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates in the load deck for container locks to accommodate 1x 20ft container

Stanje: novo, prevoženi kilometri: 100 km, moč: 324 kW (440,52 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 8.900 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.050 mm, Leto izdelave: 2025, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Brand new MAN 26.440 TGX 6x2-4 LL, configured as a transporter for construction machinery and aerial work platforms. Truck Specifications: - Long-distance driver’s cab - Auxiliary heater - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Warning beacons - Reversing camera - Multifunction steering wheel - 1 bunk bed - Refrigerator - Media system with navigation - Flatbed body – 100 km – 324 kW (441 hp) - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (green emissions badge) - 26,000 kg GVW - Automatic climate control - White – Long-distance specification – etc. Cjdot T H Skspfx Al Herb Body - Structure made from laser-cut and folded special profiles in low-bed design - Platform length approx. 8,850 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 stretch ramps, each ramp with 1 fixed section and 1 extendable section, ramps laterally adjustable - Ramp deck made of grid flooring, mechanical ramp locking including holder on outer frame when not in use (optional securing with straps) - Ramps powered by electro-hydraulic unit, including emergency operation on control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions controlled via remote control - Grid floor with increased load capacity - Rear with bevel – front bulkhead approx. 2,000 mm high with profiles bent inward - Stainless steel toolbox inside, in front of the bulkhead - 2 stainless steel toolboxes mounted laterally on the frame for lashing equipment (1 left, 1 right) - 1 stainless steel toolbox at rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear wall of cab, 2 pairs on sides of frame, 2 pairs at rear - 2 steps for access to the cargo area Load Securing: - Longitudinal member incl. Multi-X contour with lashing points, 2.5 t - 6 pairs of 6 t lashing points integrated into the longitudinal member - Outer frame perforated with 2.5 t lashing points - 6 pairs of 6 t lashing points in the outer frame - 4 pieces of 6 t lashing points at the rear - 4 pieces of 6 t lashing points below, in front of the front toolbox Painting: - Body KTL powder-coated in RAL 9005 black - Bulkhead painted in RAL 9005 black - Ramps and grid flooring hot-dip galvanized Markings: - Reflective tape according to EU standards, on sides and rear. Further information available upon request.