Vlečno vozilo

VOLVO Arbeitsbühnen Baumaschinentransporter mit Rampen

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machine transporter / work platform transporter Blodpfxjw Itl Us Abrec ▪ FH 500 8x2R ▪ Trailing axle, electro-hydraulically steered, single tires ▪ Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle ▪ High-roof long-distance safety cab FH ▪ Cab auxiliary heater, 2 kW ▪ 33 l cool box with freezer compartment, under bunk ▪ Air suspension on front axle(s) ▪ Transmission / I-Shift control via operator panel on driver's seat ▪ I-Shift driving modes: Standard, Performance, and Economy ▪ I-See with map-based topography and traffic information ▪ Eco cruise control (cruise control), including brake cruise control ▪ Manual shifting possible in automatic mode (incl. kickdown), adaptive traction control ▪ Adaptive cruise control (ACC) with collision warning and emergency braking function ▪ Lane keeping assist ▪ Side collision avoidance and turn assist (both sides) ▪ Driver alert system for drowsiness warnings * VEB Volvo Engine Brake * etc. WIESE body for work platform and construction machinery transport with hydraulic loading ramps with 2 pairs of wheel recesses including covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height on upper edge floor approx. 1,050 mm unladen - Robust, weight-optimized steel welded structure, box-type construction - Short crossmember spacings for high point loads - Rear end beveled for low approach angle - External frame profile 90° - Bulkhead in reinforced version - Internal bottom tool box in front of bulkhead - Grating floor - Suitable for wheel loads of up to 5,000 daN - Above the axles: steel plate tool boxes and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into external frame - Longitudinal members with Multi-X profile along the entire length with numerous lashing points, 2.5 t - 4 lashing eyes 8 t recessed at the rear (left/right/center/center) - 4 lashing eyes 8 t recessed at the front bulkhead (left/right/center/center) - External frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design: 2 individual/stretch ramps, both laterally adjustable - Ramps can be used as drive-up ramps or bridging ramps for warehouse technology (stretch section remains closed), fixed ramp section placed on dock ramp - Sturdy tension bar as transport safety (alternatively with strap tensioning) - 2 hydraulic rear supports with footplates, warning buzzer and indicator light in cab - Ramp and support operation via electro-hydraulic system - Control by radio remote or manual emergency controls on switch block - Switch block mounted in stainless steel toolbox on the frame side - Superwinch 8.2 t with approx. 20 m steel cable - Access steps with grab rail on right and left for walking onto loading area - 5 stainless steel drawer-type tool boxes, with optional lighting available at extra cost - Side skirting as shown in sample images (green vehicle), available as an option at extra cost - KTL coating for the superstructure - Spherical trailer hitch at rear, 3.3 t - 4 LED work lights - 2 LED reversing lights mounted high on bulkhead - 4 LED work lights externally mounted on the frame for area illumination - 2 LED work lights at the rear - 1 removable rotating beacon at the rear Stock vehicle is supplied with cab color in white and body in nova grey (exterior frame painted in RAL color of y

Stanje: rabljeno, prevoženi kilometri: 570.000 km, moč: 294 kW (399,73 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, konfiguracija osi: 3 osi, skupna masa: 26.000 kg, prva registracija: 05/2002, dolžina tovornega prostora: 8.400 mm, širina tovornega prostora: 2.350 mm, emisijski razred: Euro 3, barva: rdeča, Oprema: klimatska naprava, parkirni grelec, * Mercedes-Benz 2540 Actros MP1 construction machine transporter * First registration: 2002 * 570,000 km * Euro 3 * Telligent manual transmission with clutch * Air conditioning * Auxiliary heater (parking heater) Blsdpfjv H Iatjx Abrec * 6x2 axle configuration * Leaf-air suspension * Trailing steering axle * Hydraulic ramps * Body dimensions: 8.40 x 2.35 m * Loading height: 110 cm * Wheelbase: 5.90 m * Unladen weight: 12,300 kg * Payload: 13,700 kg * Overall vehicle length: 11.35 m

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machine transporter / work platform transporter • FH 500 8x2R • Trailing axle, electro-hydraulically steered, single tires • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • FH long-distance safety cab • Cab auxiliary heater, 2 kW • 33 l coolbox with freezer compartment under bunk • Air suspension on the front axle(s) • Transmission/I-Shift operated via control unit on driver's seat • I-Shift drive modes: Standard, Performance, and Economy • I-See with map-based topographical and traffic data • Eco Cruise Control (cruise control) including brake cruise control • Manual gear selection possible in automatic mode (incl. kickdown) • Adaptive Traction Control • Adaptive Cruise Control (ACC) with collision warning & emergency braking • Lane Keeping Assist • Side collision avoidance & turn assist (both sides) • Driver alertness warning system for fatigue • VEB Volvo Engine Brake • etc. WIESE bodywork for aerial platform and construction machinery transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. wheel recess covers Body dimensions: - Usable length approx. 9,050 mm - External width 2,550 mm - Platform height (top of floor) approx. 1,050 mm unladen - Robust, weight-optimized steel welded construction, box-type design - Short crossmember spacing for high point loads Blodpfx Asw Itmlsbrec - Rear end beveled for low approach angle - External frame profile 90° - Bulkhead in reinforced design - Internal storage box at bottom in front of bulkhead - Grating floor - Designed for 5,000 daN axle load - Above axles: steel toolboxes & outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 tonnes, flush-mounted in outer frame - Longitudinals each with Multi-X contour along the entire length, many lashing points 2.5 tonnes - 4 lashing eyes 8t at the rear, recessed (left/right/center/center) - 4 lashing eyes 8t at front bulkhead, recessed (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design as 2 individual/split ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or as a drive-over ramp for warehouse technology (sliding part remains closed), fixed ramp section placed on hall ramp - Heavy-duty locking bar for transport security (optional with strap lock) - 2 hydraulic rear supports with plates incl. warning buzzer & indicator light in cab - Ramps and supports operated by electro-hydraulics - Control via radio remote and emergency control at control block - Control block mounted in stainless steel toolbox at side of frame - Superwinch, 8.2 t, with approx. 20 m steel cable - Access steps with handrails left and right for cargo area access - 5 stainless steel drawer-type toolboxes, incl. lighting (option, at extra cost) - Side fairings as per sample images (green vehicle), option at extra cost - Body coating KTL - Rear tow hitch (ball), 3.3t - 4 LED work spotlights - 2 LED rear lights mounted high on bulkhead - 4 LED external work lights on frame for area illumination - 2 LED work lights at rear - 1 removable rotating beacon at rear The stock vehicle is supplied with cab in white and body in nova grey (outer frame painted to RAL color by request).

Stanje: novo, prevoženi kilometri: 100 km, moč: 290 kW (394,29 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.050 mm, Leto izdelave: 2025, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Brand new Mercedes Benz Actros 2540L 6x2, configured as a construction machinery and access platform transporter. Truck Equipment: - Long-distance driver’s cab - Auxiliary heater - Safety package - Driver comfort package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e emission standard - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - 1 sleeper berth - Refrigerator - Navigation system - 26,000 kg GVW - Automatic climate control - White – long-distance specification – etc. Bodywork: - Superstructure made of laser-cut and folded special profiles in a low-bed design - Body length approx. 8,800 mm, minus toolbox approx. 490 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 extended loading ramps, each with fixed section and extendable section, ramps laterally adjustable - Ramp surface made of grating floor - Mechanical ramp locking, incl. holders on the outer frame when not in use (optionally with strap security) - Ramp operation via electro-hydraulic unit, incl. emergency control at the valve block and manual pump in case of power failure - Hydraulic rear supports - All hydraulic functions controlled via wireless remote control - Grating floor with increased load capacity - Rear with angled tail - Front wall approx. 2,000 mm high made from inward-folded profiles - Stainless steel toolbox mounted inside in front of the front wall - 2 stainless steel side toolboxes on the frame for lashing equipment (one left, one right) - 1 stainless steel rear toolbox on the right (for hydraulic unit and valve block) - Work lights: 1 pair on rear cab wall, 2 pairs on frame sides, 2 pairs at the rear - 2 access steps for loading area inspection Load securing: - Longitudinal beams incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame perforated with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into outer frame - 4 pcs 6 t lashing points at the rear - 4 pcs 6 t lashing points at the front, below the front wall toolbox Paintwork: - Bodywork KTL powder coated in RAL 9005 black - Front wall painted RAL 9005 black Blsdpsw E Abnefx Abrec - Ramps and grating floors hot-dip galvanized Decals: - Reflective tape on sides and rear in accordance with EU regulations. Further information available on request.

Stanje: novo, prevoženi kilometri: 100 km, moč: 290 kW (394,29 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, konfiguracija osi: 3 osi, skupna masa: 26.000 kg, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.050 mm, barva: bela, Leto izdelave: 2025, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Brand new Mercedes Benz Actros 2540L 6x2 as construction machinery and access platform transporter. Truck Equipment: - Long-distance driver’s cab - Auxiliary heating - Safety package - Driver comfort package - Trailer package - Steered trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - 1 sleeper bunk - Refrigerator - Navigation system - 26,000 kg gross vehicle weight - Automatic climate control - White – long-distance version – etc. Body: - Superstructure made of laser-cut and bent special profiles in a low-bed design - Body length approx.: 8,800 mm, minus stowage area approx. 490 mm - Frame height (unladen) approx. 1,050 mm - Frame width approx. 2,550 mm - 2 stretch ramps, each ramp with 1 fixed and 1 telescopic/extendable section, ramps laterally adjustable - Ramp surface made of grating floor; mechanical ramp locking including holders on outer frame when not in use (optionally with strap securing) - Ramp operation via electro-hydraulic power unit, including emergency control at the valve block and manual pump in case of total failure - Hydraulic rear supports - All hydraulic functions operated by radio remote control - Grating floor with increased load capacity - Rear section incl. bevel - Front wall approx. 2,000 mm high with inwards-bent profiles - Stainless steel storage box inside at the front wall - 2 stainless steel storage boxes mounted laterally on the frame for securing equipment (1 left, 1 right) - 1 stainless steel storage box at the rear right (for hydraulic power unit and valve block) - Work lights: 1 pair on the cab rear wall, 2 pairs laterally on the frame, 2 pairs at the rear - 2 access steps for walk-on access to the loading area Load Securing: - Longitudinal beams with Multi-X contour including 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame in perforated design with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points at the base in front of the forward wall storage box Paintwork: Bljdpfx Ajw E Abhebrsc - Body KTL powder-coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and grating galvanized Labelling: - Reflective tape fitted laterally and at the rear according to EC regulations. Further information upon request.

Stanje: novo, prevoženi kilometri: 100 km, moč: 324 kW (440,52 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 8.900 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.050 mm, Leto izdelave: 2025, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Brand new MAN 26.440 TGX 6x2-4 LL, configured as a transporter for construction machinery and aerial work platforms. Truck Specifications: - Long-distance driver’s cab - Auxiliary heater - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Warning beacons - Reversing camera - Multifunction steering wheel - 1 bunk bed - Refrigerator - Media system with navigation - Flatbed body – 100 km – 324 kW (441 hp) - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (green emissions badge) - 26,000 kg GVW - Automatic climate control - White – Long-distance specification – etc. Body - Structure made from laser-cut and folded special profiles in low-bed design - Platform length approx. 8,850 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 stretch ramps, each ramp with 1 fixed section and 1 extendable section, ramps laterally adjustable - Ramp deck made of grid flooring, mechanical ramp locking including holder on outer frame when not in use (optional securing with straps) - Ramps powered by electro-hydraulic unit, including emergency operation on control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions controlled via remote control - Grid floor with increased load capacity - Rear with bevel – front bulkhead approx. 2,000 mm high with profiles bent inward - Stainless steel toolbox inside, in front of the bulkhead - 2 stainless steel toolboxes mounted laterally on the frame for lashing equipment (1 left, 1 right) - 1 stainless steel toolbox at rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear wall of cab, 2 pairs on sides of frame, 2 pairs at rear - 2 steps for access to the cargo area Load Securing: - Longitudinal member incl. Multi-X contour with lashing points, 2.5 t - 6 pairs of 6 t lashing points integrated into the longitudinal member - Outer frame perforated with 2.5 t lashing points - 6 pairs of 6 t lashing points in the outer frame - 4 pieces of 6 t lashing points at the rear - 4 pieces of 6 t lashing points below, in front of the front toolbox Painting: - Body KTL powder-coated in RAL 9005 black - Bulkhead painted in RAL 9005 black - Ramps and grid flooring hot-dip galvanized Markings: - Reflective tape according to EU standards, on sides and rear. Bljdpfxexqkayj Abroc Further information available upon request.

Stanje: rabljeno, prevoženi kilometri: 57.000 km, moč: 372 kW (505,78 KM), prva registracija: 04/2023, vrsta goriva: dizel, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2023, Oprema: ABS, Please visit our website for more photos, trucks, trailers, and cranes for sale. Please refer to the following reference no.: 99282 ---- REGISTRATION Year ..... 2023 Bsdpjx Epzujfx Abrjlc * Registration date ..... 28 * Chassis no. ..... YV2XT40F4PA313726 * Reference no. ..... 99282 CAB * Air conditioning * Cruise control * Adaptive cruise control ENGINE AND TRANSMISSION * Automatic gearbox * Electrical connection * Euro standard ..... 6 * HP ..... 500 * Mileage ..... 57,000 km TYRES * Size ..... 355/50 22.5 - 315/60 22.5 BRAKES * Disc brakes * ABS * Engine brake SUSPENSION * Front, parabolic * Rear, air suspension CHASSIS * Axle load, front ..... 10,000 kg * Axle load, rear ..... 9,000 - 13,000 - 10,000 kg * Toolbox TOTAL WEIGHT * Payload ..... 17,385 kg * Permissible total weight ..... 34,000 kg * Unladen weight ..... 16,616 kg CRANE * Tonne meter ..... 19 t/m * Remote control * Extendable ..... 3x * Make ..... Palfinger PK19001 * Year ..... 2022 DIMENSIONS * Internal width ..... 2,550 mm * Internal length ..... 7,800 mm

Stanje: novo, številka stroja/vozila: 9-1911138-1, prevoženi kilometri: 10 km, moč: 139,74 kW (189,99 KM), vrsta goriva: dizel, skupna masa: 5.500 kg, velikost pnevmatike: 205/75r16c, konfiguracija osi: 4x2, medosna razdalja: 4.325 mm, barva: črn, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 21, Leto izdelave: 2025, Oprema: ABS, airbag, centralno zaklepanje, dodatne luči, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, letne pnevmatike, meglenke, nadzor oprijema, parkirni grelec, parkirni senzorji, servovolan, sistem za imobilizacijo, tempomat, Minibus Mercedes Benz Sprinter 519 CDI HD Tourism - Euro 6 - 19+1+1 VIP seats Engine power: 190 HP Euro VI 9G-TRONIC automatic transmission Metallic paint MB 9197 Obsidian Black Dimensions: 200 x 320 x 770 cm ABS, ESP, ASR, EBD Original MB third brake light Light sensor and crosswind assist Digital tachograph EG – VDO, original MB Original MB speed limiter 100 km/h Rain sensor Retarder pre-installation Cruise control Alternator 14 V / 250 A – original MB Multifunction steering wheel, adjustable for height and angle Platforms under seats and raised last seat row Bjdpfew I Rvdex Abrolc Rear air suspension Anti-corrosion underbody protection Doors and Windows: Power glass door with recessed entrance Tailgate Large front panoramic windshield with electric sun blind High panoramic double glazing, tinted Upper rear window Power windows Exterior mirrors, electrically adjustable and heated Luggage compartments and extensions: Recessed luggage compartment with tailgate & side luggage compartments right and left Luggage area capacity 4.1 m³ Luggage compartment lighting Seating and Interior Trim: 19 Bus Comfort 4020 VIP seats, adjustable (backrest & sides) with Top Flair on seat cushion and backrest, with adjustable and foldable comfort headrest 2 and 3-point seat belts Seat nets Tables with cup holders Footrests 5 double seats on left side 5 single seats on right side 4 seats in last row Original MB comfort-swing driver's seat Tour guide’s seat Original MB armrest for driver’s seat Original MB seat heating for driver’s seat Original MB comfort headrest for driver’s seat Air conditioning, Heating, and Lighting: Original MB auxiliary heater 5 kW 2 convectors with booster pump & fans Original MB driver’s air conditioning 7 kW VIP service sets with reading lamp and adjustable air vents Luggage shelves with air channels and lighting (2 colors) Passenger compartment air conditioning WEBASTO DIAVIA 15 kW LED ceiling lighting LED entrance step lighting LED on platforms LED illumination between windows LED illumination below windows Interior Equipment: Interior trim plus thermal and sound insulation in passenger compartment Window trim Thermal and sound insulation Alcantara ceiling lining Anti-slip PVC floor – wood or marble effect Grab rail behind driver Curtains Dashboard with graphics Upgraded armrests in graphic design Accessories and Interior Features: Radio CD, MP3, DVD player with microphone and amplifier MBUX multimedia system with 7” touchscreen Dynamic gooseneck microphone LCD screen 19” Rear view camera 12 double USB sockets Double USB socket for driver Fridge under dashboard Digital clock and thermometer Master switch for extra installations Accessories and Exterior Features: LED headlights Fog lights with cornering function Reversing alarm Chrome hubcaps Miscellaneous: COC (Certificate of Conformity) Fire extinguisher Lettering, stickers, and decals MB service book Emergency exits / roof hatch as emergency exit Emergency hammers Available immediately