Müller-Mitteltal Tandem Tieflader- Tiefbett, 5,5 M - Durchfahrbar nakup rabljenega (45.299)

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: Djdjpk D I Aopfx Apwskp * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders Dsdpfx Asx Ipapopwskp * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating aggregate ----Drawbar / Drawbar Eye: * Drawbar adjustable in height by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flanged drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * LED rotating beacon (removable) at rear ----General Attachments: * Support winch in front * Externally mounted hot-dip galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right, outside at the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation in front of front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Sidewalls made of trapezoidal profile steel sheet, foldable with drop-side spring-assisted lifting device * Steel rear wall can be slid between the ramps – storage bracket for unused rear wall inside by the front wall * Rear stanchions bolted * Rear approach angle approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strips on the inside of ramps * 12 mm thick and 210 mm wide rubber strips on the approach slope and externally on the low-bed platform (from front wall to end sill) ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing rings every 600 mm possible * 1 x 6.3 t lashing ring at each front and rear corner * Various drill holes in front wall and end sill for 1.2 t lashing options ----Ramps: * One-piece mech. grating ramps with spring system for one-man operation, approx. 2,750 x 870 mm (can be compressed to 20 mm) ----Paintwork: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air tank, and flanged drawbar eye painted black * Sidewalls painted RAL 9010 pure white ----Info: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery time: Vehicle is immediately available

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing supports at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment by draw spring & turnbuckle * 15-pin electrical connector * Four lashing pocket sockets per side (no stakes included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear slope section) * Widening planks stored in the middle of the loading area * Excavator boom rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator boom rest) * Hydraulic, one-piece drive-on ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable, lateral ramp displacement * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- technically permissible gross weight: 30,000 kg -- Dkodpfxjx Ipbgo Apwjp * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. week 36/2026

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Moving-off aid for shunting, connected to the first axle via EBS (no installation required on the truck side) * Last axle as self-steering trailing axle with electro-pneumatic lock * Trailing axle lock for shunting purposes, activated from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator circuit * Tire pressure monitoring with display in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Landing gear at front, swing supports at rear of the chassis * Straight steel fenders * Spare wheel carrier in front of front wall crossmember (spare wheel not included) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connection lines from truck to trailer ----Low Loader Deck: * 2nd kingpin position * Saddled platform with 45° chamfered front corners and front toolbox made from galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high drop-down/removable aluminium sideboards (custom RAL color) on saddle platform * Removable 150 mm high rear wall * Rear inclined ramp of approx. 700 mm at the end of saddle platform to low-bed deck, fitted with checker plate and lashing bar for attaching aluminium approach ramps * Saddle platform with 50 mm tongued-and-grooved timber floor, low-bed platform with 60 mm tongued-and-grooved timber planks * Tread plate above axles * 9 x mechanical folding extensions to 3 m overall width, but not on rear ramp (extension planks included with lockable transverse storage compartment under load area) * Preparation for 3 ramp storage compartments under saddle platform for either aluminium ramps or timber planks for wheel trough covers Dkjdpfx Aeykx Nqspwsp * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated external frame, angled at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point, minimum spacing 480 mm) * 3 x 13.4 t recessed tie-down rings per side (1 on saddle platform, 1 on main longitudinal beams after the step, 1 above the center axle beside the beam) Low-bed Deck: * 3 x 13.4 t tie-down rings per side on outer frame (1 at the start of the gooseneck, 1 at the start of the rear ramp, 1 at the end of the ramp) * 2 x 10 t tie-down rings per side (1 between front wheel-well and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t tie-down rings per side, bolted to the outer frame of wheel wells (2 at front, 1 at rear wheel well) ----Digger Arm Rest: * Extended digger arm rest from end of last fixed axle over steering axle to end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D at rear

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option via EBS signal in the truck cabin – no installation required on the truck side * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Fittings: * Aluminum air reservoir * Stainless steel tool box, approx. 1,000 x 300 x 600 mm, mounted on the side Dksdpsx Nlkaofx Apwsp * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, drilled for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – 12 pcs 3,000 kg lashing rings per side included * 5 pockets per side for pipe stakes (100 x 50 mm) in the outer frame (stakes not included) * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanized drum supports, secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with transverse brace * Maximum drum weight per support 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided drum securing against turning and unspooling ----Loading height: * Approx. 1,040 mm when loaded ----Coating: * Chassis, bogie, drawbar, outer frame, rear under-run protection hot-dip galvanized * Axles painted in a black shade

Stanje: novo, največja dovoljena obremenitev: 27.940 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lift and lower function, including RtR valve * Start assist for shunting, applied to first axle via EBS – no truck-side installation – when lift axle is raised +30 mm ride height * Smart-Board installed on trailer as an info tool, with pressure sensors for total axle load indication * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for trailing axle controlled from driver’s cab for maneuvering purposes via EBS (no truck-side installation) * 2" king pin * 1 lift axle * Side underrun protection * Front aluminium drop support legs and rear swing-down supports on chassis * Alcoa LVL One aluminium wheels * 15-pin electrical connector * LED lighting 12/24 V * Removable rear LED beacon * 2 additional LED reverse lights * 2 LED work lights mounted on trailer sides – no truck-side installation * 7-pin power socket at rear for overlength lighting * Side marker lamps with indicator activation * Tyre pressure monitoring system with display in truck via EBS signal (no truck-side installation) * Mechanically adjustable warning sign sets front and rear * Straight steel fenders * Saddle platform with 45° bevelled front corners and front toolbox made of galvanized, powder-coated steel sheet (B = 2,480 x H = 500 x L = 665 mm), top hinged lid and side doors at the beveled corners * 400 mm aluminium side boards (RAL 9010 pure white) fold-down and removable, mounted laterally on the saddle platform * Rear wall –150 mm– slotted in * Tapered rear on the saddle platform to lowbed approx. 700 mm long with chequer plate covering and lashing bar at end for attaching aluminium ramps * Saddle and lowbed platform with 50 mm clamped wooden planks * Tear plate above the axles * Prepared for 3 mounting shafts under the saddle platform for optional aluminium ramps storage * Swing arm as a carrier for connection lines from truck to trailer * Load securing package consisting of: outer frame of the saddle platform with punched holes, 45° bent and hole-pattern for lashing devices (2 t lashing force per point, min. 480 mm spacing), side-mounted 2 x 6.3 t recessed lashing rings per side, 1 x 16.5 t lashing ring per side at incline from lowbed to saddle platform, 2 pairs 16.5 t lashing rings in lowbed (1x on longitudinal beams after the step, 1x above the centre axle beside longitudinal beam), side 3 x 13.4 t lashing rings per outer frame (1x at start of platform step, 1x start of ramp slope, 1x end of ramp slope), 3 x 10 t each side (2x between front wheel recess and 1st axle, 1x between 2nd and 3rd axle), 3 x 5 t per side screwed to the wheel recess outer frames (2 at front, 1 at rear recess) * Extended excavator arm trough from end of last rigid axle over steering axle to end cross member, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 / D front = 170 mm; each side 2 x 6.4 t lashing rings in the arm trough Dksdpfx Apjwh Hdxswep * Each side two wheel recesses, 390 mm deep and 640 mm wide for transporting wheel loaders with wheelbase 3,000–3,590 mm, tyre diameter up to 1,760 mm – retractable covers – * Second retractable cover ...

Stanje: novo, največja dovoljena obremenitev: 20.500 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lower system featuring RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN (trailing axle lock for maneuvering purposes—no truck-side installation—assigned to PIN 10 in the 15-pin connector, for shunting purposes only, not for use on public roads) * SmartBoard control box as an info tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal, no truck-side installation required * Fixed central drawbar with 50 mm flange towing eye (loaded 900 mm, mm height adjustment at head plate) * Mechanical support windlass at the front, mechanical swing supports at the rear of the chassis * Mechanically adjustable warning sign package at the front and rear Djdpfx Aor Dpz Aspwskp * Toolboxes made of galvanized sheet steel—black powder-coated—approx. 650 x 300 x 600 mm on the right side * Hydraulic flow divider * Continuous side walls (without central stanchion) up to the access ramp * Folding rear stanchions * Steel rear wall inserted in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon with holder and installation * 2 x LED reversing lamps at the rear of the vehicle (controlled by reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir timber floor * 400 mm steel front wall plug-in * Perforated outer frame approx. 45-degree angled with provisions for 3 t folding lashing brackets * In each corner, 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings on each side * Various holes in the front and end cross-members for 1.2 t lashing options * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically laterally adjustable * 4-way hydraulic control block for possible retrofit of hydraulic ramp lateral adjustment * Chassis, drawbar, front wall, mechanical rear supports, loading ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange towing eye, and front support windlass painted in black tone * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of more than 40 ltr up to 120 ltr/min) * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing supports at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment by draw spring & turnbuckle * 15-pin electrical connector * Four lashing pocket sockets per side (no stakes included) with simultaneous lashing option Dedpsx Ipb Hefx Apwjkp * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear slope section) * Widening planks stored in the middle of the loading area * Excavator boom rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator boom rest) * Hydraulic, one-piece drive-on ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable, lateral ramp displacement * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- technically permissible gross weight: 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. week 36/2026

Stanje: novo, največja dovoljena obremenitev: 6.810 kg, skupna masa: 9.600 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 4.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * EK 9.6 ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Flange-Type Towing Eye: * Drawbar as central axle drawbar with 40 mm screw-in towing eye * Continuously adjustable drawbar height with spindle lifting mechanism instead of fixed drawbar ----Coupling Height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal - no installation needed on the truck side * 15-pin power socket * LED tail lights * Flashing side marker lights ----General Attachments: * Front support winch * Closed plastic mudguards * Foldable underrun protection for pavers ----Chassis: * Chassis made from fine-grain steel ----Tipper Body: * Pallet - 3-way tipper body * 700 mm steel front wall * Asymmetrical aluminium side walls - continuous without centre stanchion - folding with overtravel catches and swinging via manual central locking * 800 mm high steel tailgate with automatic opening when tipping rearward * 4 mm Hardox 450 steel floor ----Load Securing: * Two pairs of 3 t folding lashing brackets recessed into the steel floor on each side ----Painting: * Chassis, drawbar, underrun protection hot-dip galvanized * Painting of the tipper body in a RAL colour of your choice (no special or metallic paints) can be changed up to approx. 6 weeks prior to completion ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale Djdpfxow Ndr Us Apwjkp ----Delivery Time: * Available from approx. week 42/2026

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical rear axle compensation Djdpfx Apjx Ipavswjkp * Side underrun protection * Rear swivel supports on chassis frame * Mechanically adjustable warning panel sets front and rear * Front closed plastic fenders and rear straight galvanized steel skirts, each with splash protection * Contour tapes on sides and rear, reflective * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Multi-voltage system * LED tail lights * Removable beacon at the rear * Tow bar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets each side (no stakes present) with simultaneous lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant lashing rings - swiveling and retractable, loadable in all directions and integrated in the outer frame – 13.4 t at the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not on rear taper) * Widening planks stored in the center of the loading platform * Excavator arm rest over rear axle up to the rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings fitted laterally in the arm rest) * Mechanically operated one-piece loading ramps with spring assembly (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, tow bar, and loading ramps hot-dip galvanized * Axles, springs, air tank, etc., painted in black * 235/75 R17.5 twin tires * 5,900 kg curb weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Last axle is a trailing steering axle with electro-pneumatic steering lock, activated by PIN in reverse gear * Additional lock for the trailing axle operated from the tractor unit for shunting purposes – no installation necessary on the truck side – assigned to PIN 10; the lock must be deactivated before driving on public roads ----Suspension: * Air suspension with raise and lower function and Ride-on-Road (RtR) feature ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck's display via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard installed as an info tool with pressure sensors exclusively for total axle load display * 7-pin socket at the rear for extended-length lighting * LED beacon (removable) at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing legs * Galvanised sheet steel mudguards * Swivel arm as carrier for connecting lines in front of the front panel ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm floor covering made from larch / Douglas fir instead of spruce / fir * Rear bevel – 700 mm long – on the semi-trailer platform to the low-bed section with checker plate covering, and at the end a perforated strip for attaching aluminum approach ramps * Tread plate covers over the wheels * SP combo package: toolbox with 45° corners made from galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, located on the semi-trailer platform approx. 2,480 x 500 mm * Folding lid on top as well as side doors in the angled corners * Foldable aluminum side boards 500 mm high on the semi-trailer platform, including foldable and removable rear stanchions * Inserted aluminum rear wall, 150 mm high * Second kingpin position * Preparation for container locking * Preparation for 3 recesses in the approach bevel from the low-bed to the gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding the mounting brackets into the outer frame ----Load Securing: Semi-trailer platform: * In the front corners and front, 50 mm drilled holes for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor on the sides towards the approach slope * Perforated outer frame, 45° folded with hole pattern for lashing points (2 t lashing points every 480 mm) * On each side, 2 x 6.3 t retractable lashing rings recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings centrally positioned directly in front of the approach ramp to the gooseneck and recessed * On each side, 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings recessed in the outer frame * On each side, 4 stake pockets recessed in the outer frame * Profifix lashing rail in the center along the longitudinal axis (lashing capacity 3 t per lashing circuit) Dsdpfxoykx I Hs Apwokp ----Excavator Arm Rest: * From the end of the last rigid axle to the rear crossmember, W = 770 mm, D = 270 mm (on each side, 2 x 6.4 t lashing rings solid welded in the excavator arm rest) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminum approach ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (load capacity 26 t/pair) * Hydraulic ramp

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * First inspection (ETÜ) - TA -R 14.4 ----Brake System: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar by approx. 300 mm - drawbar extension by 250 mm to 2,250 mm total length * 40 mm flange-type towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * 15-pin electrical connector * LED rear lights 12 / 24 V * Removable LED beacon at rear ----General Attachments: * Landing leg at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, externally mounted on the front right end wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Preparation in front of the bulkhead for later installation of container locks * Bolted smooth steel bulkhead * Foldable steel side walls with trapezoidal profile, with drop-side spring assist * Removable steel rear wall, stowable inside at the front of the bulkhead when not in use * Bolted rear stanchions * Rear ramp bevel approx. 860 mm ----Flooring: * 50 mm softwood flooring * 12 mm thick and 270 mm wide rubber strips on the inside of the loading ramps * 12 mm thick and 210 mm wide rubber strips on the ramp bevel and on the exterior of the low loader platform (from front bulkhead to rear cross member) ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Possible installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various drillings in the front and rear cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring assistance for single-person operation, approx. 2,750 x 870 mm (collapsible to 20 mm thickness) ----Paint Finish: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air tanks, and flange eye painted in black * Side walls painted in RAL 9010 pure white Dedpfx Apsx Ipbaowskp ----Information: * Reinforced and certified superstructure according to EN 12642 XL, including load securing certificate * Subject to errors and prior sale * New vehicle with manufacturer’s warranty ----Delivery time: Vehicle is immediately available ex Eggerstorf

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders Dkodpfox Nlkgsx Apwep * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar, 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring system with display capability in the truck dashboard via EBS signal - without truck-side installation - * 15-pin power connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Fittings: * Aluminium air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun guard ----Platform Bed: * Zurr-fix outer frame, 45° edged with hole pattern for lashing equipment, lashing force per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – as standard, each side fitted with 12 x 3,000 kg lashing rings * Each side with 5 sockets for stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanised drum supports secured via container locks, with lateral forklift pockets, centre-to-centre 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clearance between support arms approx. 1,775 mm, with crossbeam * Maximum drum weight per cable drum support: 6,000 kg * Without drive and without drum brake * Support arm with locking device for securing drum shaft * 76 mm diameter steel drum shaft with centring and rotatable ends * 2 set collars * 2 centring cones made of polyamide * 4 x 3.2 t lashing eyes on support arms for customer-side securing of drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm loaded ----Coating: * Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 t GVW possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from approx. CW 51 / 2026

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN * Additional trailing axle lock, operable from the cab for maneuvering purposes – no truck-side installation required – assigned to PIN 10; lock must be disengaged before driving on public roads Dkjdpfx Ajykx I Topwsp ----Suspension: * Air suspension with lift and lowering function as well as RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck instrument cluster via EBS signal – no truck-side installation required * LED rear lights 12 / 24 V * Flashing side marker lights * LED reverse lights, activated via reverse gear * SmartBoard mounted as an infotool with pressure sensors exclusively for total axle load indication * 7-pin socket at the rear for overlength lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as a carrier for connection cables in front of the front bulkhead ----Warning System Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm flooring made of larch / Douglas fir instead of spruce / fir * Rear inclined section – 700 mm long – on the saddle platform to the low-bed with checker plate surface and at the end a perforated strip for hanging aluminum loading ramps * Tread plate covers above the wheels * SP-Combo Package: Tool box with 45° corners, made of galvanized steel and additionally powder-coated in RAL 9006 white aluminum, on the saddle platform approx. 2,480 x 500 mm * Hinged lid on top and side doors in the slanted corners * Fold-down aluminum side walls, 500 mm high, on the saddle platform, including rear stakes, foldable and removable * Inserted aluminum rear wall, 150 mm high * 2nd kingpin position * Prepared for container locks * Prepared for 3 mounting shafts in the inclined section from the low-bed to the gooseneck * Prepared for retrofitting fold-out supports for 3 m extension by welding in receptacles on the outer frame ----Load Securing: Saddle Platform: * Front corners and forward 50 mm bores for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor towards the inclined ramp * Perforated outer frame, 45° angled with hole pattern for tie-downs (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t retractable lashing rings recessed in the outer frame Low Loader Platform: * 2 x 16.5 t lashing rings centered directly before the inclined section to the gooseneck, recessed * Each side with 3 pairs 13.5 t and 5 pairs 10 t retractable lashing rings recessed into the outer frame * Each side with 4 stake pockets recessed in the outer frame * Profifix lashing rail centered in the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From end of last rigid axle to end crossmember W = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings permanently welded into the excavator arm rest) ----Ramp: * Hydraulic one-piece “ALLTEC” aluminum ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per set) * Hydraulic ramp shifting on sliding tube for ramp shaft ----Hydraulics: * Hydraulic flow divider in the trailer (for lorry hydraulic pump output exceeding 40 l/min up to max. 250 l/min), climbing strips on t

Stanje: rabljeno, največja dovoljena obremenitev: 19.800 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2019, Oprema: ABS, * Müller Mitteltal 3-osna prikolica za zabojnike za odpad * Tip TM 2 24 * Za dva zabojnika za odpad od 7 do 10 m³ * Zavarovanje tovora s samo dvema verigama na zabojnik Dksdpfxsyx R Eno Apwjp * Dvojne pnevmatike 265/70 R19,5 * Zračno vzmetenje * BPW osi * Vrtljivo vlečno uho pnevmatsko znižljivo s pnevmatskim sproščanjem * 8 UVV pritrdilnih obročev 5t za pritrditev napenjalnih elementov * 8 premakljivih omejevalnikov zabojnikov za bočno centriranje zabojnikov * EBS * Tehnično dovoljena skupna masa 27.000 kg

Stanje: novo, Leto izdelave: 2026, New model, now with 9,900 kg gross weight! Cable drum transport trailer. Permissible total weight 9,900 kg, payload approx. 7,000 kg (standard equipment). Hydraulic lifting and lowering of the cable drum from the towing vehicle or via separate engine (4-stroke petrol; 8.1 kW; electric start) with weather protection cover. Hydraulic drum drive with rubber-coated drive rollers. Drum diameter 800–3,000 mm, drum width up to approx. 1,650 mm, centering cones for cable drums. Two-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, tires 315-80R22.5, tire pressure monitoring. 40 mm adjustable towing eye, dual-line air brakes, LED lighting 12+24 V. Toolbox, advertising panels in the side underride protection. Fully hot-dip galvanized chassis. New vehicle including factory warranty. Available from approx. calendar week 26-2026. (Archive photos) = Further Information = Dedpfx Aeyyhb Njpwjkp Unladen weight: 2,900 kg Payload: 7,000 kg gross weight: 9,900 kg Front tires: 315-80R22.5 Country of manufacture: DE Please contact Jan-Marc Schwickert for more information.

Stanje: rabljeno, največja dovoljena obremenitev: 13.860 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2022, dolžina tovornega prostora: 6.770 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 600 mm, prostornina tovornega prostora: 10 m³, Oprema: ABS, ? pocinkano podvozje ? nizko sklopljen ? vlečno oko 50 mm ? zaklep za kontejner ? po 12 pritrdilnih obročev na vsaki strani ? vzvratna kamera ? bobnaste zavore ? duomatski priključek ? ABS ? zračno vzmetenje ? orodjarna ? EBS ? podporne noge ? dvojna kolesa ? BPW osi Djdsxb Ig Sopfx Apwekp Vse informacije brez garancije / Vmesna prodaja pridržana.

Stanje: rabljeno, največja dovoljena obremenitev: 13.860 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2022, dolžina tovornega prostora: 6.770 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 600 mm, prostornina tovornega prostora: 10 m³, Oprema: ABS, ? pocinkano ogrodje ? nizko spojeno ? vlečno uho 50 mm ? zaklep zabojnika ? po 12 priveznih obročkov na stran ? vzvratna kamera ? bobnaste zavore ? Duomatic priključek ? ABS ? zračno vzmetenje ? orodjarna ? EBS ? podporne noge ? dvojne pnevmatike ? BPW osi Vsi podatki brez garancije / vmesna prodaja pridržana. Dodpfsxb Iglsx Apwjkp

Stanje: rabljeno, največja dovoljena obremenitev: 15.100 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/1987, dolžina tovornega prostora: 8.650 mm, širina tovornega prostora: 2.480 mm, ? Mehanske rampe ? Nakladalna višina: cca 910 mm ? Nosilec rezervnega kolesa ? Vlečno uho 40 mm ? Rotacijska luč ? Bobnasta zavora ? Listnato vzmetenje ? 1 x shranjevalna skrinja Djdpfxjyw Egwe Apwskp ? Dvojna kolesa ? SAF osi Vsi podatki brez garancije / Predhodna prodaja pridržana.

Stanje: rabljeno, največja dovoljena obremenitev: 10.080 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 08/2017, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, prostornina tovornega prostora: 6 m³, Leto izdelave: 2017, Oprema: ABS, Stock št. 5820 Müller-Mitteltal 3-stranski tandem jekleni kiper priklopnik / aluminijaste rampe / pocinkovano podvozje / široke pnevmatike! ---- * Proizvajalec: Müller-Mitteltal * Tip: KA-TA-R 13,5 * Prva registracija: 08/2017 * Skupna masa: 13.500 kg * Lastna masa po prometnem dovoljenju: 3.420 kg * Nosilnost: 10.080 kg * Osi: 2 x Gigant / bobnaste zavore * Vzmetenje: listnato vzmetenje * Pnevmatike: 385/55 R 19.5 približno 50% na jeklenih platiščih * Tehnični pregled: 08/2026 * EBS * Barva: podvozje pocinkano, kiper nadgradnja modra * Prostornina kiperske kadi: približno 6 m³ (5,00 m dolžina x 2,42 m širina x 0,50 m višina) * izvlečne aluminijaste rampe * vlečna kljuka s 50 mm ušesom, nastavljiva po višini * kiper nadgradnja s 4 pari zložljivih pritrdilnih ušes v tleh Dsdozdm S Sopfx Apwokp * nosilec za polno obremenitev spredaj * dodatne zložljive opore zadaj * predal za orodje iz nerjavnega jekla spredaj desno * četrtinski blatnik * certifikat za varovanje tovora * vozilo iz prve roke Nemški priklopnik!! Nemški dokumenti!! Prva lastništvo!! Opomba o morebitnih napakah v oglasu: Kljub skrbni pripravi oglasa lahko pride do posameznih napak v besedilu ali podatkih. Ne prevzemamo odgovornosti za napake, spremembe ali vmesno prodajo. Vse informacije so brez garancije. Prosimo, da nas kontaktirate za preverjanje podrobnosti ali dodatna vprašanja.

Stanje: novo, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Reference number for enquiries: 31943-O * NEW VEHICLE – soon available in your desired color. Müller-Mitteltal KA-TA-R 11.9 Tandem Low-bed Three-way Tipper Trailer with Ramps * Tyres: 385/55 R19.5 (4 units), BPW axles, parabolic springs, drum brakes * GVW: 11,900 kg, payload: 8,750 kg * Tyre pressure monitoring with in-cab display via EBS signal * EBS instead of ABS, 24 volts * EBS multi-voltage system for 24V and 12V vehicles (e.g., tractors) * Side marker lights with indicator activation * LED lighting system for 12V and 24V * 2 additional LED reversing lights * Floor galvanized, 5m x 2.42m, 0.5m side walls, laser-welded, swinging, folding, and removable * Prepared for retrofitting sidewall extensions later * Lockable compartment under the tipping body for the drive-on ramps * Incl. aluminium ramps, 8t load capacity, 3.57m long, stowed in ramp compartment under tipper body * Floor and front wall hot-dip galvanized * 4 UVV lashing rings LC 5000daN front and rear + 8 recessed and foldable lashing eyes LC 3000daN evenly distributed in tipper floor * Drawbar infinitely height-adjustable, hot-dip galvanized, 40mm towing eye * Mesh hooks * Bolt-on, galvanized rear stanchions * Excavator bucket rest mounted on the front wall Dedpfx Aszbfmkspwskp * One plastic toolbox, mounted right-hand side of chassis frame * Step in front of front wall ---- * We are Müller-Mitteltal authorized dealer ---- * Request a quote from us! * e.g. from €545 net/month for 60 months, no down payment, no residual value. An offer from our financing partner FM LeasingPartner ---- Our opening hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside opening hours, available by appointment We speak German, English, Polish, and French WhatsApp Leasing, financing, and trade-in possible.

Stanje: rabljeno, največja dovoljena obremenitev: 13.640 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2019, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.500 mm, HU: NOVO Skupna masa: 18.000 kg/20.000 kg Lastna masa: 4.360 kg Nosilnost: 13.640 kg/15.640 kg Dodatne informacije Dsdpfx Apoyw Ep Sowskp - dvojna kolesa 235/75R17,5 - osi Gigant - 4 pari pritrdilnih obročkov - pnevmatska zapora - znižljivo podvozje - nakladalne rampe pribl. 2.300 mm v prostor za shranjevanje - zadnja podporna noga - skladiščna omarica - zaščita proti podletu

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord infotool installed with pressure sensors for displaying axle group loads * Reflective contour tape on the sides and rear * LED beacon (removable) at the rear * 15-pin electrical connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front enclosed individual plastic mudguards * Rear straight steel mudflaps with spray suppression * Side underrun protection * Extension in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments with lockable folding lids (folding lids open towards the rear) * Chassis made from high-strength fine-grain steel * Floor over bogie platform made of 50 mm softwood, and in the low-bed platform made of 60 mm softwood * Outer planks of the ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t each at the front left and right on the main frame of the bogie platform; one pair of 13.4 t lashing rings at the front and rear sides of outer frame; one pair of 10 t lashing rings on each side foldable and lowerable, loadable in all directions, integrated into the side frame; 5 t bolted lashing rings on the outer frame of the wheel recesses (2 per front wheel recess, 1 per rear); 2 pairs of 6.4 t lashing rings at the excavator stick compartment * 11 pairs of fold-out outriggers for overall width of 3 m (not on the rear incline) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for width-extension planks, steel, mounted crosswise to the loading area in front of the first rear axle * Excavator stick compartment above the rear axle extending to the end of the ramp incline, approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on bogie platform) for transporting wheel loaders with wheelbase 3,100 – 3,640 mm * Mechanical drop-down supports at the rear Dkjdpfjxmpyksx Apwep * Hydraulic folding ramps with hydraulic extendable tip, approx. 4,650 x 720 mm * Hydraulic sideward ramp displacement * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded deck height approx. 890 mm ± 20 mm (including 860 mm ramp incline) * Chassis, bogie, fold-out outriggers, rear supports, and access ramps fully hot-dip galvanized * Axles, air tanks, and drawbar painted in black shade * Tires: 235/75R17.5 * Vehicle is fully hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – without truck-side installation * Drum brakes * 4 x 11 t Gigant axles Dkodpfx Apexmpydswep * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord infotool installed with pressure sensors for total axle load display per axle group * Reflective contour tape on the sides and rear * LED rotating beacon (removable) at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front closed single plastic mudguards * Straight rear steel mudflaps, each with spray suppression * Side underrun protection * Superstructure in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments including lockable folding lids (folding lids opening to the rear) * Chassis made from high-strength fine-grained steel * Floor over the bogie platform made of 50 mm softwood, and 60 mm softwood in the low loader platform * Outer planks of the drive-on ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, 1 pair each of 13.4 t lashing rings at the front and rear outer frame, 1 pair each of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 5 t lashing rings bolted to the outer frame of the wheel recesses (2 at the front recess, 1 at the rear), 2 pairs of 6.4 t lashing rings on the excavator stick holder * 11 pairs of folding outriggers for a total width of 3 meters (not at the rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the widening boards made of sheet steel, mounted transversely to the loading area in front of the first rear axle * Excavator stick holder above the rear axle up to the end of the approach slope approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on the bogie platform) for transporting wheel loaders with a wheelbase of 3,100 - 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area over the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loading height loaded approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding outriggers, rear drop-down supports, and drive-on ramps galvanised * Axles, air tanks, and drawbar painted in black * Tires: 235/75R17.5 * Vehicle is galvanised * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, PT 30 Profile: ----Braking System: * EBS (electronic braking system) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Drawbar: * Drawbar, 1,200 mm long, with 40 mm towing eye and height adjustment via traction spring & turnbuckle ----Electrical / Lighting: * Smart-Board information system mounted on the trailer (for axle load indication – separate front and rear display) Dsdpfsxptn Rjx Apwokp * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear ----General Attachments: * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board sets front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel mud skirts with spray protection * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Compartment in the bogie for accessories, with folding lid and 2 fixed container locks (directly behind the bogie platform) * 2 galvanized steps on the bogie, left and right ----Low Loader Platform: * Robot-welded non-slip overlay on the steel plate of the bogie platform (protruding weld seams) ----Load Securing (La-Si package consisting of): * 2 lashing eyes (13.4 t) front left & right on front bulkhead carrier * 1 pair of UVV lashing rings at front & rear (13.4 t) and 3 pairs of UVV lashing rings on each side (10 t), pivotable and lowerable, loadable in all directions, recessed in outer frame * 3 stake pockets on each side, each with 2 t lashing capacity * Profifix lashing rail in longitudinal axis, centered in flat area, for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear taper) * Widening planks stored in the centre of the loading platform ----Ramps: * Hydraulic one-piece drive-on ramps, approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way control block for future retrofit of hydraulic ramp lateral adjustment ----Excavator Arm Rest: * Excavator arm rest above rear axle, extending to the rear end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, located laterally in the main longitudinal frame ----Loading Height: * Loaded approx. 910 mm +/- 20 mm (air suspension) ----Paintwork: * Chassis, bogie, folding outriggers, drop-down supports and ramps hot-dip galvanized * Axles, slewing ring, air tanks, and drawbar painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf