Tristrani nagibni priklopnik

MÜLLER-MITTELTAL 18 to. Tand.-Stahl - Strong -3 Seiten mit Rampen

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering function for loading operations ----Drawbar / Flange Towing Eye: * Drawbar with positive-locking height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V electrical system * LED tail lights 12 / 24 V integrated in underrun protection ----General Fitted Components: * Landing gear at front * External folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side * Plastic quarter mudguards ----Tipper Body: * Steel pallet 3-way tipper body made of high-strength fine-grained steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet metal * Hardwood pad for excavator bucket bolted to the front wall * Continuous side walls – without central stanchion – folding with board spring lifters and manual central locking with swinging function * Screwed-in rear posts * Combination steel double-wing tailgate, asymmetrically split, swivels and locks up to 270°, not foldable, with additional swing frame for automatic tailgate opening during tipping; locking via galvanized rod latch and central locking, deactivation function for automatic tailgate opening when tipping backwards with open wing door * 4 mm steel-sheet floor * Two-step entry, front left * Rear track rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t lashing eyes recessed in the side external frame ----Loading Ramps: * Recessed compartment for loading ramps at rear in the chassis * 1 pair of aluminium loading ramps (10 t / pair) approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles ----Paintwork: * Chassis, drawbar, rear posts, front wall, tipper body, underrun guard, rear folding supports hot-dip galvanized * Side walls – KTL-coated – and tailgate painted in RAL 9010 pure white * Side walls in other RAL colours available at extra cost * Axles, air tanks, flange towing eye, front landing gear painted in black tone Nkjdpfx Abevin T Sj Uew ----Information: * Load securing certificate according to EN 12642 XL? * Errors and prior sale excepted * Sample images (actual vehicle photos may vary due to special equipment) ----Delivery time: * Available from calendar week 15 / 2026

Stanje: novo, največja dovoljena obremenitev: 16.200 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.250 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 870 mm, skupna širina: 2.550 mm, skupna višina: 3.710 mm, Leto izdelave: 2026, Oprema: ABS, Humbaur HBTZ 217224 BS Njdpfxjt Aubro Ab Uekw * New vehicle * Tandem low-loader trailer * Galvanised * Air suspension * Lift axle * Construction machinery transporter * Year of manufacture: 2026 * Gross weight: 21,000 kg * Unladen weight: 4,800 kg * Payload: 16,200 kg * Overall dimensions: 9,400 mm x 2,550 mm x 3,710 mm * Internal dimensions: 7,250 mm x 2,540 mm * Loading height: 870 mm * Tyres: 12 x 235/75 R17.5 * Approach angle: 13 degrees * Galvanised drawbar * Standard twin tyres * 15-pin connector * Reinforced lashing points * 12 t gear support winch * Galvanised steel loading ramps * EBS (Electronic Braking System) with stability program * 24 V lighting system (multi-chamber rear lights) * Heavy-duty, fully welded and hot-dip galvanised chassis * Softwood flooring * Steel mudguards * 2 wheel chocks * Toolbox Optional accessories available on request! TRADE-INS ACCEPTED FOR ALMOST EVERYTHING!!! PART EXCHANGE AND EXTRA PAYMENT POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm !!! Over 500 new and used trailers always in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, največja dovoljena obremenitev: 15.860 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2024, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, * KA-TA-R 21.0: * Wabco EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Gigant axles * Air suspension with level control during tipping operation * Start-up aid for maneuvering purposes on the 1st axle (controlled via EBS) * 1st axle as a lift axle (fully automatic) * Jost landing gear at the front * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * 7-pin 12V power connector * Multi-chamber tail lights with galvanized protective box * 2 LED reverse lights Nsdjv D Tb Repfx Ab Uskw * One LED work light per side * Drawbar with K80 ball coupling (adjustable mm, coupling height approx. 440 - 550 mm when loaded) with elevated conduit support for connection lines * Bolted galvanized steel underrun protection * Plastic quarter mudguards in front of the first and behind the last axle * Shovel and broom holder on the front cross member * Chassis made of high-tensile steel * Steel 3-way tipping body (fixed front wall, continuous side walls - without center sections -, right side wall swinging via central locking and foldable with drop side torsion spring lift, left side wall foldable with hydraulic drop side, tailgate swinging via automatic hook lock, 5 mm steel floor made of HARDOX-450 or equivalent, 4 x 3 t. UVV lashing rings recessed per side in the outer frame) * Support load 3 t. * Tyres 600/55/R22.5 * Errors and prior sale excepted * Trailer is in a very good / as-new overall condition

Stanje: rabljeno, lastna masa: 4.560 kg, največja dovoljena obremenitev: 13.440 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2021, naslednji pregled (TÜV): 07/2026, dolžina tovornega prostora: 5.130 mm, širina tovornega prostora: 2.420 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Kombinirani pokrov, vpenjalna ušesa, dvojna kolesa, doplačilo za rampe: 800 €, -- Pridržujemo si pravico do tiskarskih napak, napak in sprememb, slikovno gradivo je informativno --, Več podatkov na: !, Več podrobnosti: ! Nodoyth Easpfx Ab Uekw

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 102 h, 2023 | SEBA New Evolution 70-40 | Used Crusher | 102 hours Njdpfxsytn Sao Ab Uekw 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 119,600 or Make an Offer. Payment on delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 82 inspection points: 78 approved ✅ 3 imperfect ℹ️ 1 issue ⚠️ 📌 Inspector's Comment: Well-maintained jaw crusher from 2023, some scratches present, all conveyor belts appear in good condition, left track requires some tension, jaws and top deck in good shape, no further issues found during inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39845 Equippo" is commonly used when searching for more details online. 💡 Why this machine and our service stand out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Stanje: rabljeno, Leto izdelave: 2004, Veuillez indiquer le numéro de référence sur demande : 20508 Spécifications : - Année modèle 2004 - Concasseur à mâchoires C145 - Rénové - Aléseuse de lignes - Tous les roulements remplacés - Sur remorque - Nouveaux roulements axiaux - Nouveau vérin pour l’ouverture de la mâchoire - Nouvelles bagues de pression - Nouvelle armoire de démarrage - Plaques de concassage disponibles en option avec supplément - Disponible immédiatement Description : Nous proposons à la vente un concasseur Metso C145 (rénové) de l’année 2004. Tout a été remplacé : nouvelles bagues, roulements, nouveau carter de direction, nouveaux vérins. Tout fonctionne correctement, mais le montage reste à terminer. Disponible immédiatement Poids propre : Modèle : Metso C145 2004 (rénové) Nsdpfx Ajwlm Ekob Ujkw = Plus d’informations = Numéro de série : 3xxxx Contactez ATS Norway pour plus d’informations.

Stanje: rabljeno, Prosimo, navedite referenčno številko pri povpraševanju: 15024 Popolna drobilna naprava na prodaj Metso 125 čeljustni drobilnik, model 2008 Metso GP 550 drobilnik, model 2009 Metso GP 300 drobilnik, model 2012 Lokomotiva A 132 širokotirna, letnik 1991 Sizer, DP 2016 Visier, model 2016 Terex TSH 7203-38 sito, model 2013 Metso FS 353 sito, model 2009 Nadzorna oz. kontrolna soba, 1x 20-futni kontejner Električna/razdelilna soba, 2x 20-futna kontejnerja Obrat deluje vsak dan. Oglejte si video.   Lastna teža: 1 Model: m/ matestasjon, sikteverk og kjeftknuse = Dodatne informacije = Njdpfx Aovyfbzeb Uokw Za več informacij kontaktirajte ATS Norway.