Faymonville Euromax Gtz-3Aub nakup rabljenega (191)

Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: Extendable loading platform with rear chamfer approx. 500 mm x 8° 8 pairs of flip-out lashing rings 1 pair of recessed lashing rings at the front of the loading area Cutouts in the outer frame for securing straps Approx. 48 mm thick hardwood flooring; checker plate above the axles Two-Part Steel Ramps: One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg. Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually Tyres: 235/75 R 17.5 3PMSF Brake System: Brake system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU standards, 24 Volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 Lhjdsl Sl Izepfx Adlel 15-pin ISO-12098 Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer High-quality single-colour 2K topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel Structure: High-strength fine-grained steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the front wall 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connection panel 2 wheel chocks with holder on the front wall Mounting at the rear of the gooseneck for ALU approach ramps Bracket for beacon at trailer rear Galvanized supports under sloped area of load floor White reflective tape per EU regulations on sides, extension, and red at the rear Electro-hydraulic unit under the rear of loading platform Warning sign brackets including sockets left/right on gooseneck and rear plate Control valves for ramps mounted right side of trailer Mudflap at rear of trailer Manual and documentation on USB stick 3.5" loose king pin supplied On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH) Removable rear galvanized stakes (Body length approx. 2,560 mm) 3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container 6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame Galvanized extensions, extendable by approx. 230 mm per side Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor Checker plate coverings above the king pin and loading area...

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2009, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, vzmetenje: zrak, Leto izdelave: 2009, Dodatne informacije: Znamka: FAYMONVILLE Model: Telemax Konstrukcija: nizkopodna prikolica (platforma, dolžina L = 13330–17530 mm, raztegljiva / višina H = 1400 mm) Letnik: 01.2008 Vzmetenje: zračni sistem Zavore: bobnaste Dimenzije: D/Š: 13800 mm / 2550 mm Mase: polna/prazna: 59000 kg / 11310 kg VSE OSJE SO KRMILJENE Letnik modela: 2007 Vrsta vzmetenja: zračni sistem Zavore: bobnaste Vrsta vzmetenja: zračni sistem Zavore: bobnaste Lhsdpszhvqljfx Adlol Krmiljenje: krmiljenje Vrsta vzmetenja: zračni sistem Zavore: bobnaste Krmiljenje: krmiljenje = Več informacij = Vzmetenje: zračno vzmetenje Srednja os: krmiljena Zadnja os: krmiljena Prazna teža: 11.310 kg Nosilnost: 47.690 kg Največja dovoljena masa: 59.000 kg Za več informacij se obrnite na Marka Ševtšenka ali Alejandra Goyenecheja.

Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform: - Gooseneck, length approx. 4,100 mm with central beam - Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps - Pneumatic locking system with conical locking bolts and reinforced locking positions - Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles, Suspension, and Tyres: - BPW axles and suspension, all axles hydro-mechanically forced steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R17.5, twin-mounted Paintwork: - 6-coat surface treatment - Complete steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax Steel Structure: - Steel structure made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket at the front connection strip - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck) - 2'' kingpin - Mechanical landing legs with 2-speed gearbox and hand crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles - One locking position on the extension, approx. every 500 mm - 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards - 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm - 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm Lhodpfx Adoiuy Nleljl - Tapered end crossmember of the vehicle, approx. 350 mm 10° - Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle - 1 pair of drop tube supports at the rear crossmember - Mudguards on all axles - Central lubrication system with 1 pump - Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles - Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels - One 7-pin socket at the rear crossmember - Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers - Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring - 2 axle load gauges + axle load diagram - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN

Stanje: novo, lastna masa: 7.900 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, obratovalna teža: 7.900 kg, Oprema: ABS, Swan Neck: - Swan neck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood decking Loading Area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Recess in the chamfer and encroaching into the loading area for receiving the excavator bucket stick approx. 2,900 x 750 x 210/290 mm - Cut-outs in the external frame of the loading area for attaching tension straps - Hardwood decking approx. 48 mm thick, over the axles with tread plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle self-steering t- Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - TPMS tyre pressure monitoring system compliant with ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure blasted automatically by wheel blast machine after welding - Second blasting with corundum for optimal adherence of the coating system - Final coating: two layers of 2K top coat, solid colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and coated in RAL 9010 (Pure White) - Cavity sealing with special wax Electrical System: - Electrical system according to EU standards, 24 volt ASPÖCK-NORDIK (ASS3) lighting - ASPÖCK-UNIBOX at front connection rail with sockets 2x 7-pin & 1x 15-pin Included Accessories: - Multiple lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on galvanized front connection rail - 4 wheel chocks with holders mounted on the front wall - Receiver at rear of swan neck for ALU loading ramps - Galvanised folding supports beneath rear chamfer of loading area - Bracket for beacon at rear of trailer - Galvanised extendable outriggers, extendable by approx. 230 mm per side - White reflector tape to EU spec at sides and rear, red at rear - Brackets for warning signs on left and right of swan neck and rear panel, including socket - ALU side boards and rear board on swan neck, removable, approx. 2,440 x 400 mm - Rear galvanised stake pockets are removable - 2 pairs WADER container pockets in loading area for 20ft container - 6 pairs stake pockets for removable stakes 100 x 50 mm in the outer frame - Adjustable hanging rail for ALU access ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area chamfer - Sand-finish anti-slip coating painted onto the tread plate on swan neck and loading area - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with position light - Bracket for beacon fitted to warning boards - 80 km/h speed sticker rear and on both sides - European reflective signs (Red-Yellow) at the rear of trailer - Manual and operating instructions on USB stick Lsdpfx Adsunrapelehl - HRM metallisation (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then specified visible surfaces metallised with ZINACOR 850 (Zinc 85% - Alu 15%) hot-finished

Stanje: rabljeno, barva: rumena, Leto izdelave: 2013, Faymonville STZ-3UB. Leto proizvodnje: 2013. 10-tonske osi SAF. Teža: 12.300 kg. Nosilnost: 29.700 kg. Maksimalna teža: 42.000 kg. Lhsdpfxozybgpo Adljl Nosilnost sedla: 18.000 kg. Servo volan na 3 krmilnih osi. Zračna vzmetitev. Hidravlično dvigovanje od tal do zgornjega dela. - dolžina: 3000 mm. Rezan talna plošča. Vitli. Hidravlični sistem prikolice, ki deluje na napetosti NATO. 2 hidravlični oporniki na zadnji strani. 2-smerne hidravlične rampe: - dolžina: 2850 + 1750 mm. - Hidravlični sistem od leve proti desni. Dimenzije: Zgornji del: D: 3750 mm. Š: 2500 mm. V: 1400 mm. Višina sedla: 1200 mm. Talna plošča: D: 9550 mm. Š: 2550 mm. V: 900 mm. Pnevmatike: 245/70R17.5, 80 %. ID št.: 439. Splošni pogoji poslovanja podjetja Heinhuis veljajo za vse oglase, ponudbe in kalkulacije podjetja Heinhuis, za vsa sporazumevanja, sklenjena s podjetjem Heinhuis, ter za pogovore, ki jim predhodijo. Z vsakim obliko odziva sprejemate veljavnost splošnih pogojev poslovanja podjetja Heinhuis in izjavljate, da ste se z njimi seznanili. Naše cene so izvozne neto cene. = Dodatne informacije = Leto proizvodnje: 2013. Lastna teža: 12.300 kg. Nosilnost: 29.700 kg. Maksimalna dovoljena masa: 42.000 kg. = Informacije o podjetju = Za več informacij:

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Load Area: - Extendable loading area with rear taper approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with square climbing strips 15 x 15 mm, including lower extensions - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel as well as protruding into the loading area for parking excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of lashing rings, installed flat at the front of the load area (LC 10,000 daN) - 5 pairs of folding lashing rings on the outside (LC 5,000 daN) - 2 pairs of folding lashing rings on the outside (LC 10,000 daN) - 2 pairs of lashing rings in the dipper stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the load area for securing straps (LC 2,000 daN) - Incl. three-part removable galvanized covers over the wheel recesses – max. point load 3.5 t / pc. Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surfacing - Ramp with hydraulically folding ramp sections, hydraulic lifting gear, and hydraulically adjustable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tool kit Ledpfxjup U Hzo Adlohl - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Mounts for warning signs left and right at the gooseneck and at the rear, each with socket - One spare wheel - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized front connector strip - 4 wheel chocks - Galvanized, extendable outriggers approx. 230 mm per side - Galvanized folding supports beneath the loading area bevel - Rear trailer bracket for rotating beacon - Cover plates for bridging the gap between ramps and load area - White reflective tape to EU regulations, sides and on extensions; rear in red - Electro-hydraulic unit installed at the rear beneath the loading area - Ramp control valves mounted on right trailer side - European reflective panels (red-yellow) on rear of trailer - Four extendable warning boards, approx. 423 x 423 mm, with position light - Bracket for rotating beacon on warning boards - Removable ALU side boards and rear board on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (structure length approx. 2,560 mm) - 2 pairs of WADER container pockets in loading area for 20ft or 30ft container - 3 pairs of socket pockets for stakes 100 x 50 mm in outer frame of loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame at loading bevelling - Painted sand layer on chequer plates of the gooseneck and loading area for anti-slip protection - 80 km/h speed stickers rear and both sides - Load manometer for axle load measurement, including load chart.

Stanje: rabljeno, barva: modra, Leto izdelave: 2017, Faymonville F-S42-1ACA. Letnik: 2017. 11,2-tonske osi SAF. Teža: 12.110 kg. Nosilnost: 25.890 kg. Maksimalna teža: 38.000 kg. Nosilnost priklopa: 18.000 kg. Sistem EBS ABS ALB. Hidravlični sistem priklopnega vozila, združljiv s standardom NATO. Hidravlično snemljiv priklop. Zračna vzmetitev. Rezervno kolo. Servo volan. Daljinski upravljalnik. 5-metrska raztegljiva platforma. Dimenzije: Osnava: D: 4000 mm. Š: 2550 mm. V: 1550 mm. Višina priklopa: 1200 mm. Platforma: D: 6300 mm. Š: 1000 - 2540 - 3000 mm. V: 450 mm. Debelina platforme: 300 mm. Zadnja stran priklopnika: D: 2800 mm. Š: 2550 mm. V: 950 mm. Pnevmatike: 235/75R17,5, 80 %. Na voljo 2 kosa! Priklopnik nemške izdelave! Številka ID: 596. Splošni pogoji Heinhuis veljajo za vse oglase, ponudbe in cenitve družbe Heinhuis, za vsa sklenjena sporazuma s strani Heinhuis in za pogajanja, ki predhodijo tem sporazumom. S kakršnim koli odzivom potrjujete veljavnost splošnih pogojev družbe Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji. Naše cene so izvozne neto cene. = Dodatne informacije = Letnik: 2017 Lastna teža: 12.110 kg Nosilnost: 25.890 kg Dovoljena skupna masa: 38.000 kg Raztegljiv nadgradni del: Da = Informacije o podjetju = Lhjdpfezya Rgex Adljl Za več informacij:

Stanje: novo, lastna masa: 17.250 kg, največja dovoljena obremenitev: 48.700 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 375 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 17.250 kg, Oprema: ABS, Gooseneck: Ljdpeh Hm Tzsfx Adlohl - Gooseneck in SNT design to optimize loading platform length, approximately 3,750 mm long - Gooseneck hydraulically liftable, lowerable, and detachable - For tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Lowbed: - Lowbed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length x width approx. 7,550 mm x 2,740 mm - Mechanical locking of the extension Chassis: - Rear chassis with closed outer frame - Checker plate surface and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear Axles, Suspension, and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced steered - Burst protection valve on the axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and plug pins for securing in raised position - Final coating of axles: two coats of single-color 2-component paint in "FAY-Grey-34-0260" - Technical axle load 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 Accessories: - Detachable steel front wall, approx. 400 mm high - 4 wheel chocks - Rear upper gooseneck area closed with removable cover - 1 pair of steel ramps with climbing bars and locking bolts to bridge the lowbed mounting hooks - Ramps can be positioned over or between the hooks - Mounting options for steel drive-on ramps at the rear, between the outer beams of the gooseneck - Locking point approx. every 1,000 mm on the extension - 1 lashing ring each, left and right, on the front cross member - Supply line connection strip for tractor unit, mounted at the height of outer frame profile - 6 pairs of threaded blocks on the exterior of the load floor inner beams for attaching M24 screw rings - 6 pairs of recessed lashing rings on the outside of the load floor outer beams, foldable inwards and outwards - 1 pair of threaded blocks on the front and rear of the load floor outer beams for M24 screw rings - Mounting rail for loose aluminum approach ramps on the end cross member of the vehicle - Central lubrication system with 2 pumps, brand BEKAMAX - Remote steering front and rear, cable remote controlled, with axle tracking control - 3 kW electro-hydraulic power unit for hydraulic operations, except hydraulic winches - Removable galvanized loading floor, can be placed in 3 elements between the outer beams, with hardwood covering - Foldable extensions, approx. 230 mm per side - Loose extension boards, steel-edged - 4 warning signs approx. 423 x 423 mm - Radio remote control for rear steering - 3.5” kingpin - Anti-slip coating on the left chamfer of the gooseneck - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Guide plate from gooseneck for the fifth wheel plate, approx. 800 mm wide - 1 spare wheel with mounting adapter - Parking position on the gooseneck for warning signs when not in use - 2 pairs of stake pockets integrated into the chassis outer frame, for plug-in stakes approx. 100 x 50 mm - Excavator stick trough of rear chassis closed at the rear with a removable plate - Trailer color: Mercedes-Benz 7350 Novagrey

Stanje: novo, lastna masa: 10.900 kg, največja dovoljena obremenitev: 37.100 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear bevel approx. 1,000 mm x 6° - Technical king pin load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading platform: - Loading platform, approx. 9,600 mm long with rear taper approx. 900 mm x 6° - Platform area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, with a load capacity of up to approx. 9,000 kg - Grating surface and steel sheet floor approx. 5 mm thick as additional reinforcement on the sloped section of the platform Ramps: - One pair of two-section AXS steel ramps, approx. 4,675 mm long and approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward - Painted sand coating on the outer frame and ramp tips - Flashing lights on the outer sides of the ramp tips with control switch next to the ramp operation panel - Ramp lock in transport position with quick-release fastener Axles, suspension and tires: - BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steerable (trailing) - 1st axle with traction assistance - Operated via brake pedal in the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 - TPMS tire pressure sensors installed on all wheels including spare wheels Brake system: - WABCO EBS-E braking system in accordance with EU regulations Paintwork: - Trailer MB 7350 Novagrau Equipment included: - Removable front steel wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations, except for hydraulic winches - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating with 5 mm steel underlay as additional reinforcement - Painted sand coating - Cutouts in the outer frame of loading platform and lift bed for hooking hydraulic ramp control valves on the right-hand side of the vehicle Ledpfx Adsuadk Njlshl - 2" king pin - Central lubrication system with 1 pump, brand BEKAMAX - 1 pair of plug-in ALU side boards on the gooseneck, approx. 400 mm high, anodised - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Steel wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, lastna masa: 14.350 kg, največja dovoljena obremenitev: 53.450 kg, skupna masa: 67.800 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Gooseneck: - Gooseneck in SNT design for optimization of loading bed length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Loading bed: - Extendable loading bed, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° - A recess in the loading bed and the chamfered section for receiving the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-part steel ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 215 mm inwards - 'Super Grip' 25 mm rubber flooring and approx. 5 mm steel plate as additional reinforcement on the rear chamfer of the loading bed - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: - BPW axles and suspension, 1st axle steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve Lhodeya E A Nopfx Adlsl - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire sensors fitted on all wheels, including spares Surface treatment: - Complete steel structure automatically blasted with shot blasting system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection - Final painting with 2 layers of 2K top coat, single colour in MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, with the exception of hydraulic winches - 1 spare wheel - Outer carrier on the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings in the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - On top of the gooseneck, approx. 40 mm thick hardwood flooring, above kingpin area with checker plate cover - 2" kingpin - Round NATO socket on front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed, fold-out lashing rings in the outer frame of the loading bed - Extendable (galvanized) widenings by approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, in front of the axles fully open up to gooseneck cross beam, approx. 700 x 410 mm - Wheel recesses with square climbing bars, 15 x 15 mm, between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for wheel recesses, which can also be used as bridging elements for the extension or as widening boards - 1 pair mechanical rear supports - Radio and cable remote control - Lift axle on front axle - Square climbing bars 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 3PMSF, barva: siv, Oprema: ABS, Swan neck: - Swan neck with front corners beveled at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the load area (LC 10,000 daN) - Cut-outs in the external frame of the load area for attaching lashing straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, over the axles with checker plate covering Axles and Tires: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear or manually - Air suspension with lifting and lowering valve - Axle tools - 235/75 R 17.5 tires, 3PMSF Braking system: Lhodpouqlmnsfx Adljl - WABCO braking system as per EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Accessories included: - One spare wheel with holder in front of the front wall - 2'' king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holder at the front wall - Rear light bracket at the rear of the trailer - Mounting points at the rear area of the swan neck for ALU loading ramps - Galvanized folding supports under the chamfer of the load area - Cover plates to bridge the gap between ramps and load area - White reflective tape according to EU standards on the sides, red at the extension and rear - Electro-hydraulic unit at the rear, under the load area - Bracket for warning panels left and right on the swan neck and ramps, including power socket - Ramp control valves mounted on the right-hand side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the swan neck aluminum side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - 3 pairs of WADER container pockets in the load area for a 20ft, 30ft, or 40ft container - 6 pairs of stake pockets 100x50 mm in the external frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfered area of the load area - Anti-slip sand layer painted on the checker plate above the king pin and load area - Mounting for beacon on the warning panels - European reflective plates (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load chart - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel construction shot-blasted, then the defined visible surfaces finished hot-metallized with ZINACOR 850 (zinc 85% - aluminum 15%)

Stanje: novo, največja dovoljena obremenitev: 36.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. - Gooseneck in SNT design to optimize the platform length, approx. 3,700 mm long, rear with a chamfer of approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic power pack to control hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit - Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper section of the outer beams of the gooseneck for a bolted lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the outer beam of the gooseneck (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - The gooseneck and rear chamfer feature grating flooring with 5 mm steel reinforcement - 2-inch king pin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable to supply the electro-hydraulic power pack and/or the electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) - On the gooseneck: 1 pair of detachable aluminum side walls, approx. 400 mm high, anodized finish LOAD PLATFORM: - Load area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° - Loading platform behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered. 3rd axle with electro-magnetic reverse lock activated via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand at our discretion, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel underlay as additional reinforcement, designed for point loads: - on the lift bed - on the load platform - Painted sand coating on the cover plates of the gooseneck as well as transition areas between gooseneck and lift bed, lift bed and load platform, and between load platform and ramps - 1 spare wheel mounting bracket under the load platform, right side before the axles - Cutouts in the outer frame of the platform and lift bed for hooking in tension belts (LC 2,000 daN) - 11 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the platform - 11 pairs of recessed lashing rings along the central girder (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear part of the platform Ledpsyhkquefx Adlshl - Control valves for the hydraulic ramps on the right side of the vehicle - 1 pair of foldable mechanical rear supports with one-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a...

Stanje: rabljeno, barva: zelen, Leto izdelave: 2018, Faymonville F-S42-2ACB. Letnik: 2018. 12-tonske osi Pendel-X. Največja dovoljena masa: 49.000 kg. Obremenitev klatne: 25.000 kg. Hidravlično snemljiva prikolica. Hidravlični sistem, ki deluje na priključku NATO, priključen na tovornjak. EBS ABS ALB. Lodpfx Aezybbyodlshl Rezervna pnevmatika. Hidravlično vzmetenje. Daljinski upravljalnik na kablu. Aluminijaste plošče + orodjarna na priključku. 5,5 metra dolžina, podaljšljiva. 2 x 25 cm, razširjena. Povezovalna ploščad za bager: 2750 x 600 mm. Cinkana. Dimenzije: Priključek: D: 3650 mm. Š: 2500 mm. V: 1550 mm. Višina klatne: 1250 mm. Ploščad: D: 8000 mm. Š: 2550 mm. V: približno 350 mm. Debelina ploščadi: 220 mm. Zadnji del prikolice: D: 2750 mm. Š: 2550 mm. V: 1000 mm. Pnevmatike: 245/70R17,5, 80 %. Nemška prikolica! ID št.: 465. Na vse oglase, ponudbe in kalkulacije podjetja Heinhuis, na vsa sklenjena sporazuma s podjetjem Heinhuis in na pogajanja, ki jim predhodijo, se uporabljajo splošni pogoji podjetja Heinhuis. Z vsakim odgovorom potrjujete veljavnost splošnih pogojev podjetja Heinhuis in izjavljate, da ste se seznanili z njimi. Naše cene so izvozne neto cene. = Več informacij = Letnik: 2018 Dovoljena celotna masa: 49.000 kg Podaljšljiva nadgradnja: Da = Podatki o podjetju = Za več informacij:

Stanje: rabljeno, barva: zelen, Leto izdelave: 2015, Faymonville F-S44-1ACA. Leto izdelave: 2015. Os SAF, nosilnost 10 ton. Teža: 22.250 kg. Nosilnost: 57.750 kg. Največja dovoljena teža: 80.000 kg. Nosilnost pete: 40.000 kg. Sistem EBS ABS ALB. Hidravlični sistem, priključek na prikolici NATO. Aluminijaste plošče na prikolici. Hidravlično odstranljiva prikolica. Zračno vzmetenje. Raztegljivost: 5 metrov. Radijski daljinski upravljalnik. Most za bager: 5600 mm x 950 mm. Pnevmatike: 235/75R17,5, 80 % preostale življenjske dobe. Dimenzije: Prikolica: Dolžina: 4900 mm. Širina: 2500 mm. Višina: 1800 mm. Višina pete: 1300 mm. Talna plošča: Lhjdpezyb E Sjfx Adlol Dolžina: 8000 mm. Širina: 2750 mm. Višina: 500 mm. Debelina talne plošče: 300 mm. Zadnji del prikolice: Dolžina: 5600 mm. Širina: 2750 mm. Višina: 1050 mm. Prikolice D-2. Leto izdelave: 2015. Os SAF, nosilnost 10 ton. Teža: 3650 kg. Največja dovoljena teža: 36.100 kg. Nosilnost pete: 16.100 kg. Zračno vzmetenje. Pnevmatike: 235/75R17,5, 70 % preostale življenjske dobe. Nemška prikolica! Na voljo 4 kosi! Številka: 484. Splošni pogoji poslovanja podjetja Heinhuis veljajo za vse oglase, ponudbe in cenitve podjetja Heinhuis, za vsa sklenjena sporazuma s podjetjem Heinhuis in za pogajanja, ki jim sledijo. S kakršnim koli odzivom potrjujete veljavnost splošnih pogojev poslovanja podjetja Heinhuis in izjavljate, da ste se z njimi seznanili. Naše cene so izvozne neto cene. = Dodatne informacije = Leto izdelave: 2015 Lastna teža: 22.250 kg Nosilnost: 57.750 kg Dovoljena masa: 80.000 kg Raztegljiva prikolica: Da = Podatki o podjetju = Za več informacij:

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Partial equipment listing. Full equipment details available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Two-part steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism * Maximum load per pair: 30,000 kg Landing legs: * JOST landing gears (manual) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated via reverse gear and manually * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations with EBS-E (2S2M) without connectors to the tractor unit Steel structure: * Steel construction made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final coating with 2 layers of two-component topcoat, single colour in RAL 3002 carmine red, in accordance with RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Wheels in silver Ledjy Auhujpfx Adlohl Including accessories: * One bracket for warning signs on both sides at the gooseneck and at the rear, including socket * 1 spare wheel holder under the loading area on the right-hand side * 2" kingpin * Galvanized steel front wall * Yellow-red air couplings on the galvanized connector strip at the front * 4 wheel chocks with holders on the front wall * 3 height-adjustable wooden planks * Galvanized folding supports under the loading area bevel * Bracket for a rotating beacon at the rear of the trailer * Height-adjustable tarpaulin frame (approx. 3,960 mm) * Galvanized front wall with tensioning mechanism for sliding curtains, height-adjustable by approx. 400 mm * EDSCHA roof, forward-sliding, on aluminium roof beam profiles (bolted with front and rear wall) * 3 pairs of sliding stakes in the loading area * Superstructure can be hydraulically widened at the rear to left and right by approx. 750 mm * Sliding roof with liftable portal carrier * Sliding tarpaulin with approx. 700 mm slack in length, with tensioning straps spaced approx. 600 mm

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 04/2012, skupna dolžina: 12.640 mm, skupna širina: 2.530 mm, skupna višina: 3.420 mm, vzmetenje: zrak, Leto izdelave: 2012, MAX Trailer STN 3U, 3-osni nizki prikolici, 1 krmiljena os, pocinkana, hidravlične rampe, podaljški Naprodaj je MAX Trailer STN 3U, 3-osna nizka prikolica. Prikolica je pocinkana in opremljena z 1 krmiljeno osjo, hidravličnimi rampami in podaljški. Primerna je za transport strojev, gradbenih strojev in drugih težkih tovorov. Tehnični podatki: Proizvajalec: MAX Trailer, Faymonville. Tip: STN 3U. Prva registracija: . 3 osi. 1 krmiljena os. Pocinkano podvozje. Največja dovoljena masa: 48.000 kg. Dovoljena obremenitev osi: 10.000 kg na os. Dovoljena obremenitev sedelne prikolice: 18.000 kg. Lastna teža: približno 9.860 kg. Hidravlične rampe. Podaljški na obeh straneh. Lesena in jeklena tovorna površina. Belgijska registracija. Številka podvozja: YAFTL3110000122. Dimenzije: Dolžina tovorne površine: 8,60 m. Dolžina priklopnega nosilca: 1,46 m + 2 m, skupaj 3,50 m. Širina: 2,53 m. Podaljški: 2 x 23 cm. Največja širina s podaljški: približno 2,99 m. Višina tovorne površine: približno 90 cm. Rampe: Dolžina ramp: približno 4,06 m. Širina na rampo: 77 cm. Skupna višina, vključno z rampami: približno 3,42 m. Prikolica je rabljena in ima glede na starost ustrezne znake uporabe. Videoposnetki so na voljo na zahtevo. Ogled in testna vožnja sta možna pri nas v Deventerju. Haverhoek Trucks B.V. Zweedsestraat 6. 7418 BG Deventer. Nizozemska. Pieter Haverhoek. Tel.: . [](mailto:). Lhedjz D U Ewspfx Adlol [](). = Dodatne informacije = Konfiguracija osi: Vzmetenje: zračna vzmet Zadnja os 1: dvojna guma; maks. obremenitev osi: 10.000 kg; profil gume levo notranji: 70 %; profil gume levo zunanji: 70 %; profil gume desno notranji: 70 %; profil gume desno zunanji: 70 % Zadnja os 2: dvojna guma; maks. obremenitev osi: 10.000 kg; profil gume levo notranji: 70 %; profil gume levo zunanji: 70 %; profil gume desno notranji: 70 %; profil gume desno zunanji: 70 % Zadnja os 3: dvojna guma; maks. obremenitev osi: 10.000 kg; krmiljena; profil gume levo notranji: 70 %; profil gume levo zunanji: 70 %; profil gume desno notranji: 70 %; profil gume desno zunanji: 70 % Teže: Lastna teža: 9.860 kg. Nosilnost: 38.140 kg. Največja dovoljena masa: 48.000 kg. Funkcionalnost: Višina tovorne površine: 90 cm. Stanje: Tehnično stanje: zelo dobro. Optično stanje: zelo dobro.

Stanje: zelo dobro (rabljeno), konfiguracija osi: > 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 03/2003, dolžina tovornega prostora: 12.500 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.620 mm, skupna dolžina: 12.500 mm, skupna širina: 2.550 mm, skupna višina: 1.620 mm, vzmetenje: hidravlika, velikost pnevmatike: 275 / 70 R22.5, barva: bež, Leto izdelave: 2003, Konfiguracija osi Dimenzija pnevmatik: 275 / 70 R22.5 Znamka osi: SAF Vzmetenje: hidravlično vzmetenje Zadnja os 1: Dvojna montaža; dvigljiva os; največja obremenitev osi: 10.000 kg; krmiljena Zadnja os 2: Dvojna montaža; največja obremenitev osi: 10.000 kg Zadnja os 3: Dvojna montaža; največja obremenitev osi: 10.000 kg; krmiljena Zadnja os 4: Dvojna montaža; največja obremenitev osi: 10.000 kg; krmiljena Zadnja os 5: Dvojna montaža; največja obremenitev osi: 10.000 kg; krmiljena Teže Lhedpfx Adjuu E S Sjlol Lastna masa: 13.100 kg Nosilnost: 61.900 kg Dovoljena skupna masa: 75.000 kg Funkcionalno Višina nakladalne površine: 162 cm Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Finančne informacije Cena: na zahtevo

Stanje: rabljeno, največja dovoljena obremenitev: 36.515 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2023, naslednji pregled (TÜV): 05/2027, Oprema: ABS, Izvod opreme: V-priklop: V-priklop s poševnimi robovi, spredaj pribl. 45° in zadaj pribl. 750 mm x 10°. 3 pari pritrdilnih obročev (LC 5.000 daN). Tla iz trdega lesa, debeline pribl. 30 mm. Platforma z raztegljivo izvedbo: Platforma z raztegljivo izvedbo in zadaj poševnimi robovi pribl. 1.000 mm x 8°. 5 parov pritrdilnih obročev, zunanji, z možnostjo zlaganja (LC 5.000 daN). 3 pari pritrdilnih obročev, zunanji, z možnostjo zlaganja (LC 10.000 daN). 1 par pritrdilnih obročev, nameščen vodoravno na sprednjem delu platforme (LC 10.000 daN). Tla iz trdega lesa, debeline pribl. 48 mm, nad osmi rebrasto jeklo. Osi: Osi BPW in vzmetenje, vse osi so hidravlično-mehansko prisilno usmerjene. Tehnična obremenitev osi: 12.000 kg na os. Zračno vzmetenje z ventilom za dvig in spuščanje. Orodje za osi. Pnevmatike: Pnevmatike 245/70 R 17.5 3PMSF, indeks obremenitve (146/146 F) – znamka po naši izbiri. Podporne noge: JOST podporne noge (mehanske) z 2-stopenjskim menjalnikom za pribl. 24 t nosilnosti (pribl. 50 t testna obremenitev). Zavorna sistema: Zavorna sistema v skladu z direktivami EU s sistemom EBS-E (2S2M) brez povezovalnih vodov do vlečne enote. Lakiranje: Odlična in dolgotrajna protikorozijska zaščita standardno peskanega jeklenega okvirja, zagotovljena s 2-komponentno (2K) osnovo z večjo vsebino cinka. Kakovostno 2-komponentno (2K) končno lakiranje v eni barvi, RAL 3002, karminska rdeča. Zadnji del je metaliziran in lakiran v RAL 9010 (čista bela). Metalizirano lakiranje ni mogoče. Jeklena konstrukcija: Jeklena konstrukcija iz visoko trdnih finozrnatih jekel. Vrste jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa). Električna napeljava: Električna napeljava v skladu z direktivami EU, razsvetljava 24 voltov ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX na sprednji priključni plošči z vtičnicami 24N, 24S in 15-polna. Priključek v skladu s standardom ISO. 24N ISO-1185, 24S ISO-3731, 15-polni ISO-12098. Vključeno naslednje dodatne opreme: - 2-palčni kraljevi zatič - pocinkana jeklena sprednja plošča, pribl. 400 mm visoka - rumeno-rdeče zračne spojke na pocinkani sprednji priključni plošči - 4 klini z nosilci na sprednji plošči (± 5 kg) - nosilec za rezervno kolo pred sprednjo ploščo - elektro-hidravlična agregat (± 45 kg) - dodatno krmiljenje od spredaj in zadaj s kabelskega daljinskega upravljalnika preko gumbov, z nadzorom enoslednosti osi (brez vgradnje v vlečno enoto) - nosilec na zadnjem delu V-priklopa za aluminijaste rampe - evropske odsevne table (rdeče-rumene) na zadnjem delu prikolice - rumen odsevni trak v skladu z direktivami EU na straneh, na raztegljivi platformi in na zadnji strani prikolice - na V-priklopu in zadnji plošči, na levi in desni strani, po en nosilec za opozorilne table, vključno z vtičnico - nosilec za okroglo luč na zadnji strani prikolice - pocinkani zložljivi nosilci pod poševnino platforme - odbijač blata na zadnji strani prikolice - priročnik in opis na USB-pomnilniku - nalepka za omejitev hitrosti 80 km/h na zadnji strani in na obeh straneh - manometer za obremenitev osi, za ugotavljanje obremenitve osi, vključno z diagramom obremenitve. Lhedpfxezqiias Adlsl

Stanje: dober (rabljeno), konfiguracija osi: > 3 osi, dovoljena osna obremenitev (os 1): 7.600 kg, dovoljena osna obremenitev (os 2): 7.600 kg, dovoljena osna obremenitev (os 3): 7.600 kg, prva registracija: 03/2013, vzmetenje: zrak, velikost pnevmatike: 205/65R17,5, barva: rdeča, Leto izdelave: 2013, = Dodatne možnosti in dodatna oprema = - Zračna vzmet - Centralno mazanje = Opombe = Faymonville STN-4UBX. Letnik: 2013. 7,6-tonske osi SAF. Maks. dovoljena masa: 40.000 kg. Obremenitev kraljevega boljena: 18.000 kg. Hidravlični sistem po standardu NATO. EBS, ABS, ALB. Aluminijaste stranske stene na vratu prikolice. Vrvni vitel z daljinskim upravljalnikom. Hidravlična ploščad (povezava med tovorno površino in vratom prikolice): - Dolžina: 3000 mm. Tlak s vzdolžnimi rezi. Centralni sistem za mazanje. Prevožena razdalja osi: 329.395 km. Zračna vzmet. 3. in 4. os sta izvedeni kot sledilne osi. Hidravlične rampe (2-delne): - Dolžina: 3000 + 1750 mm. - Hidravlično nastavljive vstran. Dimenzije: Vrat prikolice: D: 3750 mm. Š: 2480 mm. V: 1400 mm. Višina kraljevega boljena: 1150 mm. Tovorna površina: D: 9630 mm. Š: 2550 mm. V: 800 mm. Pnevmatike: 205/65R17,5 (globina profila 80 %). Nemška prikolica! ID št.: 518. Za vse oglase, ponudbe in ponudbe podjetja Heinhuis ter za vse pogodbe, sklenjene s podjetjem Heinhuis, in za pogajanja, ki jim predhodijo, veljajo splošni pogoji podjetja Heinhuis. Z vsakim obliko stika potrjujete veljavnost splošnih pogojev podjetja Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji. Naše cene so neto izvozne cene. = Dodatne informacije = Konfiguracija osi Velikost pnevmatik: 205/65R17,5 Znamka osi: SAF Vzmetenje: Zračna vzmet Zadnja os 1: Dvojne pnevmatike; maks. obremenitev osi: 7600 kg; globina profila leve notranje pnevmatike: 80 %; globina profila leve zunanje pnevmatike: 80 %; globina profila desne notranje pnevmatike: 80 %; globina profila desne zunanje pnevmatike: 80 % Zadnja os 2: Dvojne pnevmatike; maks. obremenitev osi: 7600 kg; globina profila leve notranje pnevmatike: 80 %; globina profila leve zunanje pnevmatike: 80 %; globina profila desne notranje pnevmatike: 80 %; globina profila desne zunanje pnevmatike: 80 % Zadnja os 3: Dvojne pnevmatike; maks. obremenitev osi: 7600 kg; vodljiva; globina profila leve notranje pnevmatike: 80 %; globina profila leve zunanje pnevmatike: 80 %; globina profila desne notranje pnevmatike: 80 %; globina profila desne zunanje pnevmatike: 80 % Lsdpfx Adezzxnaelohl Zadnja os 4: Dvojne pnevmatike; maks. obremenitev osi: 7600 kg; vodljiva; globina profila leve notranje pnevmatike: 80 %; globina profila leve zunanje pnevmatike: 80 %; globina profila desne notranje pnevmatike: 80 %; globina profila desne zunanje pnevmatike: 80 % Teže Dovoljena masa: 40.000 kg Funkcionalnost Višina tovorne površine: 80 cm Stanje Tehnično stanje: dobro Vizualno stanje: dobro Poškodbe: brez = Podatki o podjetju = Za več informacij:

Stanje: novo, lastna masa: 10.300 kg, največja dovoljena obremenitev: 39.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Loading platform after the gooseneck, hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° - Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with chequer plate covering Two-part Steel Ramps: - One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering Lhodpfju Hp Hrjx Adlol - Ramps with hydraulically folding ramp parts, hydraulic lifting system, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles, Suspension and Tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tires 235/75 R 17.5 3PMSF - TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories Included: - One spare wheel with holder in front of the bulkhead - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings at the galvanized connection strip in front - 4 wheel chocks - Galvanized folding supports under the platform's rear chamfer - A holder for a rotating beacon at the rear of the trailer - Cover plates to bridge the gap between ramps and platform - White reflective tape as per EU regulations along the sides of the trailer and red at the rear - Electro-hydraulic unit at the rear, under the platform - At the gooseneck and at the ramps left and right, each with a holder for warning signs, including socket - Control valves for the ramps positioned on the right side of the trailer - European reflective plates (red-yellow) at the rear of the trailer - Manual and description on USB stick - Removable ALU side walls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear, galvanized side stakes are removable (body length approx. 2,560 mm) - An electric cable winch with radio remote control, approx. 5,400 kg lifting force, including 9.5 mm steel cable, 24 m long, with guide roller - Bolted 5 t ring for cable deflection of the winch on the gooseneck without pulley - 2 pairs WADER container pockets in the platform for a 20ft container - 6 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the platform - Lift axle on the front axle with control via TEBS E, depending on actual axle load and loading condition - 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings along the central beam at the rear chamfer (LC 10,000 daN) - Sand coating for slip resistance painted on the chequer plates on the gooseneck and on the platform - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protection - Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm - Speed stickers 80 km/h rear and on both sides - Load manometer for determining axle loads including load chart - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces metallized and hot-coated with ZINACOR 850 (zinc 85% - alu 15%)

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) Lodpshlz S Njfx Adlshl • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: dober (rabljeno), konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, vzmetenje: hidravlika, velikost pnevmatike: 245/70R17,5, barva: siv, Leto izdelave: 2016, Faymonville F-S42-2ACB. Letnik: 2016. 12 ton osi SAF Pendel-X. Teža: 12.700 kg. Nosilnost: 36.300 kg. Maksimalna teža: 49.000 kg. Nosilnost pete: 25.000 kg. Raztegljivost: 4,2 metra. Razširitev: 3 metre. 2 x 25 cm razširitev, vključno z možnostjo razširitve. Hidravlično vzmetenje. Hidravlično odstranljiva vlečna prikolica (gooseneck). Hidravlični sistem, združljiv z NATO. Radijski daljinski upravljalnik. EBS ABS ALB. Aluminijaste plošče na prikolici. 3 odstranljivi deli tal. Prevleka iz cinka. Lsdpozp Nrrsfx Adlehl Dimenzije: Prikolica (gooseneck): D: 3700 mm. Š: 2480 mm. V: 1600 mm. Višina pete: 1200 mm. Platforma: D: 6350 mm. Š: 2550 mm. V: 350 mm. Debelina tal: 220 mm. Zadnji del prikolice: D: 2600 mm. Š: 2550 mm. V: 1000 mm. Pnevmatike: 245/70R17,5, 70 %. Nemška prikolica! ID št.: 565. Splošni pogoji Heinhuis veljajo za vse oglase, ponudbe in cenitve družbe Heinhuis, vse pogodbe, sklenjene s strani družbe Heinhuis, in pogajanja, ki jim sledijo. S kakršnim koli odzivom potrdite veljavnost splošnih pogojev družbe Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji. Naše cene so izvozne neto cene. = Dodatne informacije = Splošne informacije Letnik: 2016 Konfiguracija osi Velikost pnevmatik: 245/70R17,5 Znamka osi: SAF Pendel-X Vzmetenje: hidravlično vzmetenje Zadnja os 1: dvojne pnevmatike; maks. obremenitev osi: 12.000 kg; krmiljena; profil pnevmatik levo znotraj: 70 %; profil pnevmatik levo zunaj: 70 %; profil pnevmatik desno znotraj: 70 %; profil pnevmatik desno zunaj: 70 % Zadnja os 2: dvojne pnevmatike; maks. obremenitev osi: 12.000 kg; krmiljena; profil pnevmatik levo znotraj: 70 %; profil pnevmatik levo zunaj: 70 %; profil pnevmatik desno znotraj: 70 %; profil pnevmatik desno zunaj: 70 % Teže Lastna teža: 12.700 kg Nosilnost: 36.300 kg Maksimalna dovoljena masa: 49.000 kg Stanje Tehnično stanje: dobro Vizualno stanje: dobro = Informacije o podjetju = Za več informacij:

Stanje: rabljeno, barva: črn, Leto izdelave: 2019, Faymonville F-S43-1AAF. Letnik: 2019. 9 ton SAF osi. Največja dovoljena masa: 45.000 kg. Obremenitev pete sklopke: 18.000 kg. 7,4 metra, možnost podaljšanja. Servo volan, 3 vodene osi. Zračna vzmetitev. Hidravlični sistem, deluje na elektriko (NATO standard). ABS EBS ALB. Dimenzije ploščadi: D: 13.550 mm. Lhodpfezyrfvox Adljl Š: 2500 mm. V: 1450 mm. V: Aluminijaste strani: 600 mm. Višina pete sklopke: 1250 mm. Pnevmatike: 385/65R22,5, 70 % preostale življenjske dobe. ID št.: 489. Splošni pogoji poslovanja družbe Heinhuis veljajo za vse oglase, ponudbe in cenitve družbe Heinhuis, za vsa sklenjena sporazuma s strani družbe Heinhuis in za pogajanja, ki predhodijo tem sporazumom. S kakršnim koli oblikom odziva se strinjate z veljavnostjo splošnih pogojev poslovanja družbe Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so izvozne neto cene. = Dodatne informacije = Letnik: 2019 ZGV: 44.999 kg Cena: Na zahtevo = Informacije o podjetju = Za več informacij:

Stanje: novo, največja dovoljena obremenitev: 52.810 kg, skupna masa: 63.000 kg, konfiguracija osi: > 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, featuring vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available upon request. Loading platform: * Platform with approx. 30 mm thick hardwood floor * 10 pairs of hinged external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system in compliance with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For proper display, the tractor unit must be capable of transmitting and displaying this data. Axles and suspension: * BPW axles, technical load capacity 12,000 kg each, first axle rigid, all other axles hydro-mechanically force-steered, mounted on turntables * Air suspension with lift and lower valve * Axle tools Tires: Lhjdjxttc Ajpfx Adlol * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking system: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor Steel construction: * Steel structure made of high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (Yield strength 355MPa), S690QL/S700MC (Yield strength 690MPa) Painting: * Entire steel structure automatically shot-blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of two-component topcoat, single colour in RAL 1007 Daffodil Yellow, as per RAL 841GL system * Rear section metallized and painted in RAL 9010 (Pure White) * Rims Silver Grey * Paint system tested in salt spray test according to ISO 9227-NSS * All cavities sealed with special wax Including accessories: * Platform with approx. 30 mm thick hardwood floor * 2 inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanized front connection strip * At the gooseneck and rear plate left and right one bracket each for warning signs including socket * Steering from front and rear via wired remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes on the outer frame of the platform * Load pressure gauge for axle load determination including load diagram * Lift axle on the front axle controlled by TEBS E * 5 pairs of stake pocket strips across the platform for approx. 100 x 50 mm plug-in stakes * One INOX toolbox 1,200 x 460 x 550 mm, mounted at the front left underneath the platform (in direction of travel) * 1 tow coupling with reinforcement bolted to the rear crossmember * BEKAMAX central lubrication system (Pico) with NLGI-2 standard grease and removable protection for the pump * 2 LED reversing lights mounted on the rear plate * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum)

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.500 kg, dovoljena osna obremenitev (os 2): 10.500 kg, dovoljena osna obremenitev (os 3): 10.500 kg, prva registracija: 07/2014, skupna dolžina: 13.650 mm, skupna širina: 2.550 mm, skupna višina: 2.870 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5, barva: rdeča, Leto izdelave: 2014, = Dodatne možnosti in dodatna oprema = - Zračna vzmetitev = Opombe = Faymonville F-S43-1BGA. Letnik: 2014. 10,5-tonske osi SAF. Lastna teža: 10.500 kg. Maks. skupna teža: 42.000 – 49.500 kg. Obremenitev sedelne sklopke: 18.000 kg. EBS, ABS, ALB. 1. os: dvižna os. 3. os: usmerjevalna os. Zračna vzmetitev. Orodjarni predali. 2 ločeno upravljani hidravlični dvižni platformi. Dimenzije tovorne površine: D: 13.450 mm. Š: 2.550 mm. V: 1.150 mm. Višina sedelne sklopke: 1.000 mm. Mega-nizkotežna prikolica! Pnevmatike: 235/75R17,5 (70 % profila). Dimenzije: D: 13.650 mm. Š: 2.550 mm. V: 2.870 mm. Nemška prikolica! Na voljo 2 kosa! Številka ID: 391. Za vse oglase, ponudbe in predračune družbe Heinhuis ter za vse pogodbe, sklenjene s podjetjem Heinhuis, in za pogajanja, ki jim sledijo, veljajo splošni pogoji poslovanja družbe Heinhuis. Z vsako obliko stika potrdite, da ste seznanjeni in se strinjate s splošnimi pogoji poslovanja družbe Heinhuis. Cene so navedene kot neto izvozne cene. = Dodatne informacije = Konfiguracija osi Velikost pnevmatik: 235/75R17,5 Znamka osi: SAF Vzmetenje: zračna vzmetitev Zadnja os 1: dvojne pnevmatike; dvižna os; maks. obremenitev osi: 10.500 kg; profil pnevmatik levo notranji: 70%; profil pnevmatik levo zunanji: 70%; profil pnevmatik desno notranji: 70%; profil pnevmatik desno zunanji: 70% Zadnja os 2: dvojne pnevmatike; maks. obremenitev osi: 10.500 kg; profil pnevmatik levo notranji: 70%; profil pnevmatik levo zunanji: 70%; profil pnevmatik desno notranji: 70%; profil pnevmatik desno zunanji: 70% Zadnja os 3: dvojne pnevmatike; maks. obremenitev osi: 10.500 kg; usmerljiva; profil pnevmatik levo notranji: 70%; profil pnevmatik levo zunanji: 70%; profil pnevmatik desno notranji: 70%; profil pnevmatik desno zunanji: 70% Teže Lastna teža: 10.500 kg Nosilnost: 31.500 kg Maks. dovoljena masa: 42.000 kg Funkcionalno Višina tovorne površine: 1150 cm Ledpfx Ajzz Sc Rodlshl Stanje Tehnično stanje: dobro Vizualno stanje: dobro Finančne informacije Cena: Na zahtevo = Informacije o podjetju = Za več informacij: