Möslein Ta4 Schwebheim 4 Achs Tiefladeranhänger, Guter Zustand nakup rabljenega (39.703)

Stanje: novo, največja dovoljena obremenitev: 31.900 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release for spring-actuated cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lowering function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck dashboard via EBS signal – no installation required on truck * SmartBoard as infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED taillights * Removable LED beacon at rear Nsdpsylfvgefx Aibjcr ----General attachments: * Warning plates front & rear * 2 x toolboxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, right side * Closed single plastic mudguards at front * Straight steel spray suppression panels at rear, each with spray suppression * Side underrun protection ----Low-bed platform: * Turntable/platform extension by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and lockable * Flooring on turntable platform made of 50 mm softwood; on low-bed platform made of 60 mm softwood * 20 mm rubber covering instead of timber in drive lane area with a well length of 6,780 mm including sloped ramp * Rubber coating on the ramp left and right, approx. 860 mm length * 4 stake pockets per side (stakes not included) with simultaneous 2 t lashing point capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load securing (Lasi package): Turntable/platform: * 2 pairs of 13.4 t lashing eyes in outer frame of turntable/platform Low-bed: * 4 pairs of 10 t lashing rings per side on the outer frame, foldable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings at rear on each side ----Ramps: * Rubber covering on foldable access ramps * Hydraulic folding ramps with hydraulic tip extension approx. 4,650 x 720 mm * Hydraulically lateral ramp shift & load-holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stowed on left side compartment ----Excavator boom trough: * Excavator boom trough above rear axle to end of slope approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings at sides in excavator trough ----Hydraulics: * Hydraulic flow divider in trailer (for truck hydraulic pump outlet above 40 up to max. 120 ltr./min.) ----Loading dimensions: * Rear loading platform: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Platform above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape at sides and rear * Chassis, turntable, access ramps and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer warranty * Errors and prior sale reserved * Sample images may show special equipment ----Lead time: * Vehicle available from approx. week 23/2026

Stanje: rabljeno, največja dovoljena obremenitev: 29.400 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2007, naslednji pregled (TÜV): 04/2026, Oprema: ABS, * 1091 - ID vozila za telefonske upite * Proizvođač: M&V, Tip: NPSL32 * Poluniska niskopodni prikolica sa labud vratom * ABS, EBS, BPW-Eco osovine, doboš kočnice, vazdušno ogibljenje, 1. osovina podizna osovina, 2. + 3. osovina sa hidrauličkim prinudnim upravljanjem, TRIDEC šasija, osovina sa daljinskim ručnim upravljanjem, centralno podmazivanje, šina za priključivanje ulaznih rampi * Zadnji deo pneumatski izvlačiv za 1,50 m * Vrlo dobro stanje, (prema prethodnom vlasniku pre oko 3 godine urađena nova podnica i generalni remont!) * tehnički dozvoljena ukupna masa: 41.000 kg * Pneumatici: 235/75R17,5 (9 mm) ----naša e-mail adresa:     naša usluga za Vas:       - Nabavka kratkoročnih ili carinskih tablica       - Prevoz / dostava širom EU       - Carinjenje vozila za treće zemlje Ako imate pitanja na ruskom jeziku, možete pozvati sledeći broj * WhatsApp samo za govornike ruskog jezika: * Nodjyt Alzspfx Aibscr WhatsApp za engleski, nemački i druge jezike:

Stanje: rabljeno, prevoženi kilometri: 243.676 km, moč: 302 kW (410,61 KM), prva registracija: 01/2019, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 12/2026, barva: črn, vrsta prenosa: mehanski, emisijski razred: Euro 6, prostornina tovornega prostora: 13 m³, dolžina tovornega prostora: 5.800 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Oprema: ABS, klimatska naprava, parkirni grelec, * Senčnik * ABS Ncodpfx Aoyxifaoiber * TCS (sistem za nadzor oprijema) * Radio * Potovalni računalnik * Tempomat * Električna okna * Električno nastavljiva ogledala * Ogrevanje ogledal * Strešno okno * Voznikov udobni sedež * Ogrevanje sedeža * Vzdolžne in prečne zapore diferenciala * AP osi * Oranžna rotacijska opozorilna luč * Parkirno gretje * Centralno zaklepanje * Jeklen odbijač * 12-stopenjski menjalnik * Vzmetenje: listnato-zračno * Nosilnost: 17610 * Neprestana zavora: motorna zavora ---- Nadgradnja: Meiller, trosmerna jeklena, Bordmatik na levi, povišana čelna stena z zaščito za bagre, izpraznjevanje zadaj. Prodaja samo podjetjem. PRI IZVOZU SE PLAČA LE NETO CENA!!!!! VSE INFORMACIJE BREZ JAMSTVA VKLJUČNO Z OPREMO IN DODATKI. Osnova vseh prodajnih pogodb, računov, predračunov, naročil in prodajnih pogovorov so naši splošni pogoji (glejte Impressum).

Stanje: rabljeno, prevoženi kilometri: 243.676 km, moč: 302 kW (410,61 KM), prva registracija: 01/2019, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 12/2026, barva: črn, vrsta prenosa: mehanski, emisijski razred: Euro 6, prostornina tovornega prostora: 13 m³, dolžina tovornega prostora: 5.800 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Oprema: ABS, klimatska naprava, parkirni grelec, * Senčnik * ABS * TCS sistem za nadzor oprijema Ncodpfx Aioyxifgobsr * Radio * Potovalni računalnik * Tempomat * Električna okna * Električno nastavljiva ogledala * Ogrevanje ogledal * Strešno okno * Komfortni voznikov sedež * Gretje sedeža * Vzdolžne in prečne blokade * AP-osovine * Oranžna opozorilna luč * Stacionarno gretje * Centralno zaklepanje * Jekleni odbijač * 12-stopenjski menjalnik * Vzmetenje: listno-pnevmatika * Nosilnost: 17610 kg * Neprekinjena zavora: motorna zavora ----Nadgradnja: Meiller tristranski jekleni kiper, Bordmatik levo, dvignjena sprednja stena z zaščito za bager, izpust zadaj. Prodaja samo pravnim osebam. PRI IZVOZU SE PLAČA LE NETO CENA!!!!! VSE INFORMACIJE BREZ JAMSTVA VKLJ. OPREMA IN DODATKI. Osnova vseh kupoprodajnih pogodb, računov, predračunov, naročil in prodajnih pogovorov so naši Splošni pogoji (glej Impressum).

Stanje: rabljeno, prevoženi kilometri: 465.327 km, moč: 368 kW (500,34 KM), prva registracija: 03/2017, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 04/2026, zavore: retarder, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, prostornina tovornega prostora: 17 m³, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.450 mm, Oprema: ABS, klimatska naprava, parkirni grelec, * Sun visor * ABS * Radio * Cruise control * Electric windows * Electrically adjustable mirrors * Mirror heating * Roof hatch * Longitudinal and transverse differential locks * Off-road driving program * AP axles * Steel bumper * Rotating beacon (orange) Nsdeyxidpopfx Aibjcr * High-mounted air intake * Exhaust behind cab * Air dryer * Steering brake * Paver brake * Reversing camera * Fog lights * Driver comfort seat * Heated seat * ASR (traction control) * ESP (electronic stability program) * Adaptive cruise control * Active Brake Assist * Lane departure warning * Auxiliary (parking) heater * Hill start assist * Central locking * Refrigerator box * Shunting coupling * Folding underrun guard * 12-speed * Suspension: leaf/air * Payload: 17,767 kg * Continuous brake: intarder ----Body: Meiller half-pipe rear tipper body, capacity approx. 17 m³, heavy-duty version 30,000 kg (with central joint), raised front wall, rear chute, roll tarp. Sale to business customers only. FOR EXPORT, ONLY THE NET PRICE MUST BE PAID!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. All purchase contracts, invoices, pro forma invoices, orders, and sales discussions are subject to our General Terms and Conditions (see legal notice/imprint).

Stanje: rabljeno, prevoženi kilometri: 465.327 km, moč: 368 kW (500,34 KM), prva registracija: 03/2017, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 04/2026, zavore: retarder, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, prostornina tovornega prostora: 17 m³, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.450 mm, Oprema: ABS, klimatska naprava, parkirni grelec, * Sun visor * ABS * Radio * Cruise control * Electric window regulators * Electrically adjustable mirrors * Mirror heating * Roof hatch * Longitudinal and transverse differential locks * Off-road driving program * AP axles * Steel bumper * Orange beacon light * Roof-mounted air intake * Exhaust behind the cab * Air dryer Ncsdpfsyxidijx Aibjr * Steering brake * Paver brake * Reversing camera * Fog lights * Driver’s comfort seat * Seat heating * ASR (traction control) * ESP (electronic stability program) * Adaptive cruise control * Active Brake Assist * Lane keeping assist * Auxiliary heater * Hill start assist * Central locking * Refrigerator box * Shunting coupling * Foldable underrun protection * 12-speed gearbox * Suspension: leaf/air * Payload: 17,767 kg * Permanent brake: Intarder ----Body: Meiller half-pipe rear tipper body, capacity approx. 17 m³, heavy-duty design 30,000 kg (with center joint), raised front wall, rear discharge chute, roll tarp. Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE MUST BE PAID !!!!! ALL INFORMATION WITHOUT GUARANTEE, INCL. EQUIPMENT & ACCESSORIES. The basis of all purchase contracts, invoices, pro forma invoices, orders, and sales discussions are our General Terms and Conditions (see imprint for details).

Stanje: rabljeno, lastna masa: 10.650 kg, največja dovoljena obremenitev: 40.310 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, Leto izdelave: 2024, obratovalna teža: 10.650 kg, Oprema: ABS, For every used semi-trailer, you receive a current and complete inspection and functional report. Gooseneck: - Gooseneck with 30 mm thick hardwood flooring - Rear section of gooseneck straight design - 3 pairs of lashing rings (LC 5,000 daN) Loading area: - Extendable loading area design - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flush-mounted lashing rings at the front of the loading area (LC 10,000 daN) - Cutouts in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, with checker plate flooring over the axles Axles and Tyres: - BPW axles, two fixed and two self-steering axles - Air suspension, drum brakes, with raise/lower function - Self-steering axles with electro-magnetic reverse lock, activatable via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Nedsxfa E Uepfx Aibocr Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat finish, single color, in Nova Grey Accessories included: - Spare wheel holder in front of the front wall - 2" king pin - Galvanized steel front wall, approx. 400 mm high - On the galvanized connector bar at the front, yellow-red air couplings - 4 wheel chocks with holders at the front wall - Galvanized folding supports under the loading area slope - Bracket for a revolving beacon at the rear of the trailer - Extendable galvanized side extensions, approx. 230 mm per side - White reflective tape on the sides in accordance with EU regulations, at extension and red at the rear - Mounts for warning boards on both sides of the gooseneck and rear apron, including socket - Rear mudflap - European reflective signs (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - Plug-in ALU side and rear walls on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized plug-in stanchions are removable (body length approx. 2,560 mm) - 7 pairs of WADER container pockets: 1x 20ft container on the loading area; 1x 40ft container on the loading area; 1x 40ft container over the gooseneck; 2x 20ft container - 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading area - Lift axle on the front axle with TEBS E control depending on current axle load and load condition - Movable hanging rail for ALU loading ramps at the rear of the vehicle - Sanded anti-slip coating painted on checker plates on the gooseneck and loading platform - Four approx. 400 mm extendable warning boards, approx. 423 x 423 mm, with position light - Mount for beacon on warning boards - 80 km/h speed stickers on the rear and both sides - Load gauge for axle load determination, including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces hot galvanized with ZINACOR 850 metallization (zinc 85%, aluminium 15%)

Stanje: rabljeno, lastna masa: 10.900 kg, največja dovoljena obremenitev: 43.600 kg, skupna masa: 54.500 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, velikost pnevmatike: 245/70 r17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck, rigid, center tube design: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel floor with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Manually operated BPW landing legs - 550 mm long, 8° chamfer at end of gooseneck - Front wall including park position for rear wall, 400 mm high - Spare wheel holder mounted vertically on the front side of the gooseneck - 3 pairs of recessed lashing rings (LC 5,000 daN) in the loading area of the gooseneck - Aluminum side boards, 400 mm high, comprising 2x side boards each 3,150 mm long, and rear board with stanchions (galvanized) - Rectangular aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, center - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, left - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single-extendable: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel plate floor with anti-slip coating - Chamfered transition between fixed part and deck for bridging rails and wheel recesses - Excavator trough including elongated holes for load securing (LC 1,500 daN), length approx. 3,850 mm - Prepared for hydraulic ramps (electrical supply) - Rails to widen up to 3,000 mm - 8° chamfered vehicle rear, 550 mm long - Slide system for easy mounting/dismounting of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally on the loading area behind the gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally in the rear section of the loading platform - 1 pair of stanchion pocket rails approx. center of the loading area - 1 pair of stanchion pocket rails on the fixed part - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic double-folding ramps, 2,750+1,500x800 mm - Larch wood surface - Operated by remote control (wired and wireless) - Quick-change ramp (dismantling system) Chassis: - Axle brand: BPW ECO Max - 2 ride heights - 4 axles @ 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 x rigid axles and 2 x friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system by Knorr (according to EU standards with EBS-E) - Knorr TIM G2 (Trailer Information Module) - RSS (Roll Stability Support) stability control - Load-dependent lift axle on the first axle incl. starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning panels 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm - Securing points on gooseneck and on loading platform (alternatively on ramp, if available) included - Plug-in bulkhead at the end of the excavator trough - Electrohydraulic unit for ramp operation Nedpfoi Ai E Rsx Aibscr - Ramp control by wireless remote - Hydraulic rear support legs for stabilization during loading - 1 pair of additional reversing lights at the rear, activated when reversing - Larch wood widening planks (option)

Stanje: rabljeno, prevoženi kilometri: 518.228 km, moč: 375 kW (509,86 KM), prva registracija: 02/2021, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 02/2027, zavore: retarder, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, MAN 18.510 TGX vlačilec, prekucna hidravlika, tehnični pregled do 02/27, različne dodatne opreme, vsi servisi opravljeni pri MAN, navigacija, avdio sistem, hladilnik in še več. Ncodpsymir Uefx Aiber Prodaja samo trgovcem in podjetjem. Brez odgovornosti za napake v pisanju ali oglaševanju. Vse informacije brez garancije. Vmesna prodaja pridržana.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 15.900 kg, največja dovoljena obremenitev: 42.100 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 11/2001, dolžina tovornega prostora: 8.960 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 12.950 mm, skupna širina: 2.520 mm, skupna višina: 3.800 mm, vzmetenje: hidravlika, velikost pnevmatike: 245/70R17,5, medosna razdalja: 1.360 mm, največja hitrost: 90 km/h, barva: modra, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2001, Oprema: ABS, Nooteboom MCO-73-04V Top trailer from first owner, first registration 21.11.2001, Fully overhauled in 2014, Brakes renewed in 12.2025! 66,000kg total combination weight with 3-axle tractor unit, Gross weight 58,000kg, Fifth wheel load 18,000kg, 1-4 axles: 10,000 / 10,000 / 10,000 / 10,000kg, Unladen weight 15,900kg, Please refer to the technical data sheet for exact dimensions, Lowbed: 8.96m + 5.50m telescopic extension, Hydraulic supports front and rear allow the trailer including up to 30t of payload to be lifted completely—ideal for unloading laterally at a ramp, Hydraulic suspension (enables leveling even with uneven load distribution), First axle liftable, All four axles are steerable, either automatically or via remote control (also in opposite direction), Hydraulic ramps and hydraulically extendable up to 3,000mm, Nedpoyqm I Ujfx Aibjcr Load platform extendable to 3,000mm, Tyres 245/70R17.5 – 1st axle: 6/6/6/6mm, 2nd: 11/11/8/8mm, 3rd: 9/9/7/7mm, 4th: 11/11/7/5mm, Spare: 6mm, More details upon request. Sale only to business customers or for export. Leasing/financing available upon request – immediate processing possible, also without down payment! Further details and requirements on request. Vehicle description is for general identification purposes. All information, images and descriptions are non-binding. Equipment must be verified separately if necessary. The seller accepts no liability for typing or data transmission errors. Errors and prior sale reserved. Thank you very much for your interest! We look forward to your visit. Our SERVICE We are happy to take your used vehicle in part-exchange, 30-day export license plate incl. insurance, EUR-1 and all customs documents for export, TÜV / SP / UVV / tachograph inspection / OBU installation, Professional transportation to your location, Transfer from Stuttgart Airport / Sindelfingen station to us by arrangement, Retrofitting with additional components and other individual customer requests possible upon request.

Stanje: rabljeno, lastna masa: 8.650 kg, največja dovoljena obremenitev: 31.350 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2012, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, medosna razdalja: 4.725 mm, barva: oranžna, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, Osnovna barva: oranžna Dodatna oprema ABS, vzmetenje: listnate vzmeti, nosilnost (kg): 31.350 Nedpfxsyuu Ikj Aibjcr Tip nadgradnje: Goldhofer 4-osni nizkopodni priklopnik T4-2x2-32/80, BPW ECO osi z listnatimi vzmetmi, razširitve, nakladalna površina ca. 7.000 x 2.550 mm, nakladalna višina ca. 860 mm, mehanska zadnja opora, hidravlične dvižne rampe 2.850 x 700 mm, hidravlični bočni pomik, vlečna ojnica z vlečno uho 50 mm, zračni priključek Duomatik, elektrika 24 V - 2 x 7-polno, ABS

Stanje: rabljeno, skupna masa: 32.000 kg, prva registracija: 11/2005,

Stanje: kot nova (razstavni stroj), lastna masa: 10.000 kg, največja dovoljena obremenitev: 30.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 4x2, dolžina tovornega prostora: 9.220 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, Leto izdelave: 2025, Oprema: ABS, osrednja vrtljiva plošča, spojka prikolice, HTD 40K-RM-BM_ Internal dimensions: approx. 9,220 mm x 2,540 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Permissible total weight: 24,000 kg Payload: approx. 14,000 kg Tyres: 235/75R17.5 inches Loading height: approx. 900 mm Drawbar length: approx. 1,500 mm Coupling height: approx. 820-1,000 mm Ramp angle: approx. 10° Ramp length: approx. 3,150 mm Ramp width: approx. 750 mm Permissible total weight special approval: 40,000 kg Payload special approval: approx. 30,000 kg Low bed length: approx. 6,610 mm Overall dimensions (LxWxH): 11,200 Technical overall weight: approx. 44,000 kg Technical axle load: approx. 11,000 kg 6 pairs of lashing points, 3,000 kg per lashing point Lashing points in the outer frame of the low bed 4 pairs of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the high bed 1 pair of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the low bed Suspension Air suspension unit including raising and lowering effective on the rear axle unit Braking system Braking system according to EC directives with EBS 4S/3M in multivoltage version (12-24V), spring-loaded parking brake incl. 2 external test connections for brakes/modulator and bellows pressure Electrics LED lighting with indicator function for side marker lights, multivoltage (12-24V) Turntable Robust welded construction with low-maintenance ball race turntable Towing device Cranked drawbar with towing eye Ø 50mm, low-maintenance silent bushings including height adjustment for drawbar Frame Robust welded construction made of high-strength fine-grained steel Continuous cross members for maximum stability Wheel recesses at the front (top length approx. 2,500 mm - depth approx. 410 mm) and at the rear (top length approx. 1,470 mm - depth approx. 370 mm); without wheel recess covers; Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm) Wheel cut-outs above the rear wheels with wheelbase 2,010 mm, front corners chamfered, rear climbing bars on the incline for maximum safety during loading and unloading 4 pairs of stake pockets (90x50 mm) in the outer frame high bed 1 pair of stake pockets (90x50 mm) in the outer frame low bed Floor 50 mm softwood planking (painted/impregnated) Ramps One-piece hot-dip galvanised loading ramps (3,150 mm x 750 mm) with 50 mm softwood planking (painted/impregnated), laterally adjustable, directly acting upright spring lifters for effortless operation Finishing Chassis frame hot-dip galvanised in immersion bath Support 2 folding supports at the rear left and right at the vehicle rear Equipment Folding side underrun protection, front semicircular plastic mudguards – rear straight steel mudguards with antispray, 2 wheel chocks with holders; contour markings in accordance with ECE Directive R48 Front wheel recess cover with 3 pairs of stake pockets, without planking (cover retractable under the longitudinal beams) 975.00888 Hardwood planking for front wheel recess cover Rear wheel recess cover with 1 pair of stake pockets, without planking (cover retractable under the longitudinal beams) 975.00897 Hardwood planking for rear wheel recess cover 3 pairs of screwed lashing rings 6 t 3 m equipment package without incline B=11,200 Njdpfx Asiciutjibocr Folding extension with softwood boards 970.04199-36 LED warning package HTD cranked Aspöck warning boards 4-fold, electrics and revolving beacon 1 pair of storage compartments for wooden boards 3 m package (2 pieces moun

Stanje: rabljeno, lastna masa: 14.350 kg, največja dovoljena obremenitev: 48.650 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - SNT design gooseneck for optimized loading platform length, length approx. 3,700 mm - Gooseneck rear with approx. 1,000 mm x 10° bevel Loading Platform: - Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° - Recessed area in platform and bevel for accommodating the excavator’s dipper stick Ramps: - 1 pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood decking - Hydraulically folding ramp tips - Ramps hydraulically adjustable individually, approx. 235 mm outward and 215 mm inward - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the ramp outer frame Axles and Suspension: - BPW axles and suspension, first axle steering assist, all other axles forced steered hydromechanical - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse-lock, activated via reverse gear or manually - Air suspension with lift/lower valve - 235/75 R 17.5 tires - TPMS tire monitoring system Included Accessories: - Detachable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic controls (except hydraulic winches) - Park position for warning signs on gooseneck when not in use - 1 spare wheel - Gooseneck outer beams with fixing holes for bolted lashing rings - First borehole approx. 200 mm from the front, then every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of recessed lashing rings at the rear of the gooseneck - Gooseneck with 1 pair of plug-in anodized ALU sideboards, approx. 400 mm high - Gooseneck with plug-in anodized ALU rear board, approx. 400 mm high - Gooseneck deck with 40 mm thick hardwood, with checker plate above king pin - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - Round NATO socket on the front connector strip - 4 wheel chocks - Mechanical landing legs with 2-speed gearbox and crank Nedsyrfn Nspfx Aibecr - Loading platform with continuous and between-axle interrupted approx. 50 mm thick hardwood deck - Platform locking with conically welded locking profiles every 250 mm - Including pre-tensioning plate - 1 intermediate table, approx. 300 mm wide, for extension tube with large cross-section; intermediate table has offset loading surface and extendable hanging rails for aluminum bridging elements - 1 pair of lashing rings on the front cross member - 8 pairs of recessed lashing rings in outer frame of platform, can be folded outwards - Galvanized extensions extendable by approx. 230 mm per side - Wheel wells with square climbing bars, 15 x 15 mm, open continuously in front of the axles to the gooseneck cross member, approx. 700 x 410 mm - ALU covers for wheel wells, also usable as bridging elements for extension or as widening planks - Aluminum elements lockable onto extension tubes of the widenings - Extendable U-profiles for ALU covers - Wheel wells with square climbing bars, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - 1st axle with automatic lift axle function - 4 warning signs, approx. 423 x 423 mm - Radio and cable remote control

Stanje: rabljeno, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2024, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, Leto izdelave: 2024, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functional report. Gooseneck: Ncsdpfjypb Akex Aibjr - Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long - Gooseneck rear with chamfer, approx. 1,000 mm x 10° Loading platform: - Extendable loading platform, approx. 8,800 mm long, with chamfer at the rear approx. 500 mm x 10° - A recess in the loading platform and into the chamfer to accommodate the excavator's dipper stick - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood surface on the chamfer of the loading platform Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood inlay - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted approx. 235 mm outwards and 215 mm inwards individually - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle with forced steering, all other axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - Air suspension - Tyres 235/75 R 17.5 - TPMS tyre monitoring system - TPMS tyre pressure sensors Included Accessories: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for hydraulic operations - 1 spare wheel - Outer beams on the gooseneck with fixing holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the gooseneck - On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized - 2" kingpin - Round NATO socket at the front connection bar - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front crossmember - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards - Extendable galvanized outriggers, approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm, open continuously in front of the axles up to the gooseneck crossmember, approx. 700 x 410 mm - ALU covers for the wheel recesses - Lockable aluminium elements fitted on the extension pipes of the outriggers - Widenable U-profiles for inserting the ALU covers - Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - Lockable aluminium elements fitted on the extension pipes of the outriggers - 1 pair of mechanical rear supports - Remote steering control from both front and rear by cable remote control, with axle single-track alignment control - 1st axle with automatic lift axle function and start assist according to EU Directive 2021/535 - Under the gooseneck and at the rear crossmember left and right: 7-pin sockets with mountings for warning plates - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the chamfered part of the loading platform outer frame - Central lubrication system with 1 pump, BEKAMAX - Radio remote control for steering in addition to cable remote - Wabco Smart Board system - 4 warning plates, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: rabljeno, največja dovoljena obremenitev: 25.750 kg, skupna masa: 36.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2005, skupna širina: 2.550 mm, skupna višina: 3.600 mm, Oprema: ABS, Goldhofer 2-osna nizkopodna prikolica * Gigant osi z bobnastimi zavorami * Zračno vzmetenje * Krmilne osi * Rotacijska opozorilna luč * Delovne luči * Pnevmatske gume 235/75 R17,5 Pozor: Vozilo je bilo leta 2025 obnovljeno. Nova barva in popolnoma prenovljena tehnika. Njdpfxeyn Tu Ae Aibecr Za dodatne informacije smo vam na voljo.

Stanje: novo, lastna masa: 9.650 kg, največja dovoljena obremenitev: 30.350 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.740 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 4-AXLE LOWBED TRAILER WITH TOP EQUIPMENT! => HOT-DIP GALVANIZED (CHASSIS FRAME, BOGIE FRAME, LOADING RAMPS) => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOWBED AXLES => LASHING PACKAGE => PERFORATED OUTER FRAME FOR ADDITIONAL LASHING POINTS => ANTI-SLIP STRIPS ON THE REAR INCLINE OF THE RAMPS => 6 LASHING POINTS IN THE EXCAVATOR ARM TROUGH AT THE REAR SECTION => LONG ONE-PIECE LOADING RAMPS => LOW APPROACH ANGLE Perm. gross vehicle weight 40,000 kg Payload approx. 30,350 kg Chassis frame hot-dip galvanized in immersion bath Bogie frame hot-dip galvanized in immersion bath Loading ramps hot-dip galvanized in immersion bath Air suspension SAF axles with drum brakes EBS electronic braking system Tyres 235/75R17.5 – 16 ply Lowbed length approx. 7,160 mm Trough for excavator arm storage, approx. 3,000 mm x 730 mm x 180 mm at rear section of lowbed 4 pairs of 10 t recessed lashing rings in lowbed 2 pairs of 10 t recessed lashing rings in highbed 4 pairs of 3 t lashing points in external frame of lowbed 3 pairs of 6 t lashing eyes on external frame 4 pairs of stake pockets in outer highbed frame 4 pairs of stake pockets in outer lowbed frame 3-metre widening package with folding outriggers, without slope 4 warning signs with lighting Rotating warning beacon at rear LARGE STEEL TOOLBOX under cargo bed 2 storage compartments with folding covers in high platform Hydraulic ramp lifters 1-piece ramp approx. 3,150 x 750 mm Softwood flooring for cargo bed and ramps 40,000 kg GVWR only with exemption permit according to §70 => Freight costs for delivery: €2.90 plus VAT per km => Prices ex D-86368 – Gersthofen Your direct contact: Mr. Hauptmann Tel. DOLL FAHRZEUGBAU *Subject to prior sale and modifications!* *Price valid ex D-86368 – Gersthofen* Nodpfx Ashvxgzeibecr *Sale to business customers only!* *Images may differ and are for rough orientation only => images may show/contain accessories subject to extra charge*

Stanje: novo, lastna masa: 12.000 kg, največja dovoljena obremenitev: 54.000 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable loading platform with rear bevel approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the platform (LC 10,000 daN) - Cut-outs in the outer frame for tensioning straps (LC 2,000 daN) - Hardwood floor approx. 48 mm thick, checker plate over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Brake system: - WABCO brake system according to EU regulations with EBS-E (4S3M) Steel construction: - High-strength fine-grained steel chassis Axles and tires: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - Axle tool kit - TPMS tire pressure monitoring system to ECE R 141 - Tires: 245/70 R 17.5 3PMSF Nsdpfx Aeykpbkoibocr Accessories included: - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, operated from front and rear using a cable remote control with push buttons, with single-track monitoring of axles - European reflective panels (red-yellow) on trailer rear - White reflective tape in accordance with EU regulations on sides and on extension, rear red - Mountings on gooseneck and rear left/right for warning signs, incl. socket - Galvanized extensions, pull-out approx. 230 mm per side - Mount for rotating beacon at rear of trailer - Galvanized folding supports under the rear slope of the loading area - Mudflap at the rear of the trailer - Manual and documentation on USB stick - BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 and removable pump guard - Removable ALU side boards and rear board on gooseneck, approx. 2,440 x 400 mm - Rear removable, galvanized stanchions (superstructure length approx. 2,560 mm) - INOX toolbox 1,350x400x400 mm on gooseneck - Note: toolbox covers oil filler cap - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft or 1x 45ft container - 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame - Sliding mounting bar for ALU loading ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the sloping rear section - Lift axle on front axle with control via TEBS-E depending on current axle load and load condition - Four extendable warning boards, approx. 400 mm, size approx. 423 x 423 mm, each with position light - Mounting for rotating beacon on the warning boards - Radio remote control for forced steering, additionally to cable remote, with indicator lights on receiver for single-track monitoring - Checker plate surfaces on gooseneck and loading area with painted-on sand coating for slip resistance - 80 km/h speed stickers on rear and both sides - Load gauge for axle load measurement, incl. load diagram

Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick - Pneumatic locking with conical locking bolts and reinforced lock positions - Hardwood covering on the loading platform bevel Ramps: - 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm - Ramps with hardwood covering - Hydraulically folding ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward - Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - Tyres 235/75 R 17.5, twin tires - TPMS tire monitoring system compliant with ECE R141 Ncjdek Aht Uepfx Aibsr - TPMS sensors installed in all wheels including spares Accessories included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches - Parking position on gooseneck for warning boards when not in use - 1 spare wheel - On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised - On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised - Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extensions (galvanised) extendable by approx. 230 mm per side - Wheel recesses with square climbing cleats - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering at front and rear via cable remote control, with single track monitoring of axles - 1st axle with automatic lift axle function - Central lubrication system with 1 BEKAMAX brand pump - Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring - Wabco Smart Board System - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon

Stanje: novo, lastna masa: 29.600 kg, največja dovoljena obremenitev: 72.400 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.650 mm, širina tovornega prostora: 2.840 mm, višina nakladalnega prostora: 550 mm, velikost pnevmatike: 285/70 R19.5, barva: siv, obratovalna teža: 29.600 kg, Oprema: ABS, Gooseneck: Ncodpfswcmhaox Aibjr - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-axle front bogie: - Hook mountings at front and rear - Bogie length x width approx. 2,200 mm x 2,850 mm Excavator deck "BB-A": - Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and pin-lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance 4-axle rear bogie: - Mechanical pin-lug coupling for the installation of a lowbed at the front, rear crossmember at the back - Bogie length x width approx. 5,480 mm x 2,850 mm - Multiple lashing points Pendulum axles and tyres (front and rear bogies): - "PENDULUM AXLE", all axles forced-steered via hydromechanics - Hose rupture valve on axle compensation cylinders with automatic RESET function - Hydraulic cylinders with shut-off valves and locking clips for securing in raised position - Final coating on axles: 2 layers of single-colour MB 7350 Novagrau 2K paint - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres size 285/70 R19.5 Remote steering (after-steering): - Remote steering operable from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles - Socket for remote steering control on gooseneck - Cable remote control with pushbuttons and single-track control included Accessories included: - Yellow and red air couplings on the galvanised front connection bar - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at rear of gooseneck for warning boards - Hoisting jib with winch for spare wheel at the front face of the gooseneck - Truck hydraulic connection with flow control (40 l/min), including support jib for supply lines; tractor unit tank must have at least 80 litres capacity with couplings - Plug-in ALU side and rear boards on gooseneck, approx. 400 mm high, anodised - Control lever on gooseneck protected by foldable cover - Separate air connection with air gun on gooseneck - BEKAMAX central lubrication system: 1x on gooseneck, 1x on 2-axle and 1x on 4-axle bogie - Variomax tool kit - Multi-coupling hydraulic connectors on gooseneck and at lowbed hook interface - 2 spare wheels - One 7-pin socket left and right, at front and rear of rear bogie for warning boards - Front bogie with separate air connection for impact wrench - Foldable steel bed extensions, adjustable in width from approx. 2,850 mm to 3,250 mm - Steel bed inserts can be placed in 2 positions for sunken load area - Steel mats with rubber flooring, approx. 12 mm thick - Thread-in options (⌀ 40 mm) every approx. 500 mm on the upper flange of the excavator deck outer tube for eye bolts - One locking point at every approx. 500 mm on extension with mechanical lock - Socket on rear bogie for remote steering cable control - 2 reversing lights on rear panel - Four extendable warning boards (by approx. 2,000 mm), each approx. 423 x 423 mm with position lights - 1 work light left + right on rear panel of gooseneck with separate on/off switches - Two INOX toolboxes, approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Radio remote control for after-steering

Stanje: novo, lastna masa: 13.500 kg, največja dovoljena obremenitev: 51.500 kg, skupna masa: 69.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimizing loading platform length, length approx. 3,700 mm Gooseneck rear with chamfering approx. 1,000 mm x 10° Loading Platform: Telescopic loading platform, length approx. 8,800 mm, with rear chamfering approx. 500 mm x 10° Recess in the chamfer as well as into the loading platform to accommodate the excavator dipper stick Pneumatic locking with conical pin and reinforced locking positions Supply lines routed protected within the extendable beam, adapting to the respective platform length Ramps: Ncedpok Ahugefx Aibjr 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps individually adjustable hydraulically approx. 235 mm to the outside and approx. 215 mm to the inside Axles and Suspension: BPW axles and suspension, two rigid axles, two steering trailing axles Electromagnetic reverse lock, activated via reverse gear and manually Air suspension with lift and lower valve Axle tool Tyres: 235/75 R17.5 3PMSF twin tyres Load index: 143/141J (144/144F) Brake System: WABCO braking system, EBS-E in accordance with EU regulations Lighting System: 24-volt lighting system in "ASPÖCK-NORDIK full LED" Metalizing: Standard HRM metallization of the outer frame Complete steel structure shot-blasted, then visible defined surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) hot-refined Steel Construction: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified as per DIN-EN 287-1 MAG welding process according to EN ISO 4063 Shielding gas M21 as per EN ISO 14175 Accessories Included: Front wall made of steel, plug-in, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin 24N connection per ISO-11852, 24S connection per ISO-3731, 15-pin connection per ISO-12098 Round NATO socket on the front connection strip Cable to supply electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and tractor with connector (NATO-NATO) 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches 1 spare wheel with mounting adapter Outer beam of the gooseneck with fastening holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included One fastening hole in the rear upper area of the gooseneck's outer beam for a screwable lashing ring 1 pair of screw-in lashing rings Approx. 40 mm thick hardwood covering above the gooseneck On the gooseneck, 1 pair of plug-in side aluminium walls, approx. 400 mm high, anodized On the gooseneck, a plug-in aluminium rear wall, approx. 400 mm high, anodized 2" kingpin Gooseneck guide plate for fifth wheel, approx. 500 mm wide 4 wheel chocks with holder Holder for aluminium approach ramps Mechanical landing gear with 2-speed gearbox and crank Continuous hardwood floor approx. 50 mm thick on the loading platform, interrupted between axles Platform locking with conically welded locking profiles every 250 mm incl. tension plate Slotted holes at the front of the loading platform for attachable and adjustable bridging elements 1 intermediate table with recessed platform, approx. 300 mm wide for the draw-out tube with large cross-section, with sheet metal covering Front and rear with slotted holes

Stanje: novo, lastna masa: 13.250 kg, največja dovoljena obremenitev: 47.550 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 245/70 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of flat lashing rings at the front of the loading area Cut-outs in the outer frame of the loading area for inserting tension straps Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp with hydraulically folding and unfolding parts, hydraulic lifting system, and hydraulically adjustable position. Maximum load per pair: 40,000 kg Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Braking system: Braking system according to EU regulations with EBS-E (4S3M) without connecting lines to tractor unit Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer High-quality one-color two-component (2K) top coat in Novagrau Rear section metallized and painted in RAL 9010 (pure white) Metallic paint not possible Electrical system: Electrical system according to EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connections conforming to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel headboard approx. 400 mm high At the galvanized front connection strip, yellow-red air couplings 4 wheel chocks with holders at the headboard One spare wheel with holder in front of the headboard Electro-hydraulic power unit Rear and front remote steering via cable remote control with push-buttons, with single-track control of the axles Bracket at rear of gooseneck for ALU drive-on ramps European reflector signs (red-yellow) at trailer rear White reflective tape according to EU regulations at the sides, at the extension, and red at the rear At the gooseneck and on the ramps left and right, each with a holder for warning signs including socket One holder for beacon at trailer rear Galvanized folding supports under the loading platform chamfer Ramp operating valves fitted on the right side of the trailer Cover plates to bridge the gap between ramps and loading platform One mudflap at trailer rear Manual and description on USB stick Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm The rear galvanized stakes are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350 x 400 x 400 on the gooseneck, box covers oil filler cap 4 pairs of WADER container pockets in the loading area for a Nodpfx Aol Uxdkeibscr

Stanje: novo, največja dovoljena obremenitev: 38.100 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5 3PMSF, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of fold-out lashing rings 3 pairs of fold-out lashing rings 1 pair of horizontal lashing rings at the front of the loading area Cut-outs in the outer frame of the loading surface for hooking in tension belts Ncodstphtmspfx Aibor Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing legs: JOST landing legs with 2-speed gears for a 24 t lifting capacity Axles and tyres: BPW axles, two axles are fixed, two axles are self-steering, air-suspended, with drum brakes, with lift/lower function The self-steering axles come with an electro-magnetic reverse lock, which is activated via reverse gear or manually Axle toolkit Tyres: 205/65 R17.5 3PMSF Brake system: WABCO brake system according to EU regulations with EBS-E Steel construction: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK lighting ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component zinc dust primer High-quality single-colour 2-component top coat in MB 7350 Novagrau No metallic paint possible Rear section metallized and painted in RAL 9010 Accessories included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system acc. to ECE R 141 At the galvanized front connection strip yellow-red air couplings 4 wheel chocks with holder on front wall Bracket at rear of gooseneck for ALU access ramps Galvanized folding supports under the chamfer of the loading surface Mount for a revolving beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tension mechanism for the sliding curtains Height-adjustable by approx. 400 mm "EDSCHA" brand roof, sliding forward on ALU roof beam profiles, bolted to the front and rear wall In the loading surface, 3 pairs of sliding stakes Superstructure at rear hydraulically extendable to left and right by approx. 750 mm Sliding roof with upward swinging portal carrier Sliding tarp with 700 mm reserve length, with tension straps at intervals of approx. 600 mm Height to top edge of superstructure approx. 3,960 mm Journeys with the sliding roof open are not permitted and will damage the tarp Mounting rail for ALU access ramps at the rear of the vehicle At the gooseneck and at the rear panel left and right, each with a mount for warning signs incl. socket A mud flap at the rear of the trailer European reflector plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading area Lifting axle on the front axle controlled by TEBS E depending on current axle load and load status Rear structure with closed ALU double-wing doors A sanded, anti-slip paint layer on the checker plates on the gooseneck and on the loading surface BEKAMAX centralized lubrication system with standard grease NLGI-2 and a removable guard around the pump Speed stickers 80 km/h on rear and both sides Load manometer for axle load determination including load chart

Stanje: novo, največja dovoljena obremenitev: 49.000 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable Loading Platform: - Loading platform, extendable design with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Ncedpfx Aioh Etf Robsr - Hardwood flooring approx. 48 mm thick, checker-plate covering above the axles Two-Part Removable Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulic side-shift - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two fixed axles and two steering axles (self-steering), air suspended, with drum brakes, raise/lower function - Self-steering axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tool kit - Tyre size 235/75 R 17.5 Brake System: - Braking system according to EU regulations with EBS-E (4S3M) Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-tone topcoat using 2-component (2K) paint in Nova grey Electrical System: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S, and 15-pin sockets Included Accessories: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holders on the front wall - Mount at the rear section of the gooseneck for ALU approach ramps - Galvanized folding supports underneath the loading platform chamfer - One holder for warning beacon - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the side, red on extension and rear, according to EU regulations - Electro-hydraulic power unit - At the gooseneck and ramps (left/right) a holder each for warning signs including socket - Control valves for the ramps mounted on the right side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, two 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Galvanized, extendable platform wideners approx. 230 mm per side - Lift axle on the front axle with control system - 20 x 20 mm square climbing bars - BEKAMAX central lubrication system - Four warning signs extendable by approx. 400 mm eac

Stanje: novo, lastna masa: 9.600 kg, največja dovoljena obremenitev: 53.400 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.400 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.340 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: siv, Oprema: ABS, Platform area: - Platform with approx. 30 mm thick hardwood flooring - 10 pairs of folding lash rings (outward folding) Landing legs: - JOST landing legs with 2-speed gearbox, 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg per axle; first axle fixed, all other axles hydro-mechanically forced-steered, mounted on turntables - Air suspension with raise/lower valve - Axle tools included - Tyres: 385/65 R22.5 Braking system: - WABCO brake system in accordance with EU regulations, with EBS-E (4S3M) Steel construction: - Steel structure made from high-tensile fine-grained steels - Steel grades: - S355J2+N / S355MC - S690QL / S700MC Electrical system: - Electrical system according to EU regulations, 24 Volt lighting - ASPÖCK-UNIBOX on the front connection rail with 24N, 24S and 15-pin sockets - Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component zinc-dust primer - High-quality 2-component topcoat, single-colour in Nova Grey - Rear section metallized and painted in RAL 9010 Accessories included: - Platform with approx. 30 mm thick hardwood flooring - 2" king pin - One galvanized steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanized connection rail at the front - 4 wheel chocks with holders on the front wall - Storage for 1,000 mm plug-in stanchions in the rear central beam - On the gooseneck and rear panel, left and right, a mounting bracket for warning signs with socket Ncodpjrq Dlfefx Aibjr - Remote steering from front and rear, operated via cable remote control with push-buttons; with axle tracking control - Electro-hydraulic power pack - White reflective tape as per EU regulations along the side of the trailer, red at rear - 12 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the load bed - European reflective plates at the trailer rear - One bracket for a rotary beacon at the rear of the trailer - One mudflap at the trailer rear - Manual and documentation on USB stick - Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable protector for the pump - TPMS tyre pressure monitoring system: - The towing vehicle must be capable of transmitting and displaying these data for correct readout - Lift axle on the front axle, automatically controlled by TEBS E in accordance with current axle load and trailer loading status - Radio remote control for the remote steering in addition to the cable remote, with indicator lamps on the receiver for axle tracking control - 5 pairs of crosswise stanchion pocket strips on the bed for 100 x 50 mm plug-in stanchions - 80 km/h speed stickers at rear and both sides - Adjustable access ladder mounted left and right in direction of travel - 2 reversing lights mounted at the rear panel - Load gauge for determining axle loads, including load diagram - HRM metallization of the outer frame: complete steel structure shot-blasted, then all designated visible areas hot metalized with ZINACOR 850 (Zinc 85% - Aluminum 15%)