Müller-Mitteltal T3 Ng Tieflader 3-Achser Bpw Doppelbereifung nakup rabljenega (43.734)

Stanje: novo, največja dovoljena obremenitev: 9.070 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 325 mm, Leto izdelave: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronski sistem kočenja) * RDÜ (nadzor pritiska u gumama) * Bubanj kočnice, 2 x 5,5 t Gigant osovine * Parabolične opruge sa izjednačivačem opterećenja * Vučno vratilo podesivo po visini oko 300 mm * BPW podupirač * Mehaničke zadnje noge za podršku * Plastična kutija za alat napred desno na čeonoj stranici * Bočna zaštita od podletanja * LED rasveta Pgsdpfxswyhzps Ahtsn * Pod od 50 mm mekog, četinjastog drveta * U uglovima ispred čeone stranice i završnog nosača po 1 x 6,3 t hvatište za vezivanje, kao i po 2 UVV prstena za vezivanje po 6,3 t ugrađena sa strane u spoljašnji ram * Jednodelne mehaničke rampe od rešetki sa oprugom za rad jednom osobom, dimenzije oko 2.350 x 870 mm (unutrašnje rastojanje 20 mm, rampe nisu pomične) * Čeona stranica, bočne stranice, blatobrani i vučno vratilo toplo pocinkovani * Osovine, opruge, vazdušni rezervoar, prednji podupirač obojeni u crno * Novo vozilo sa punom garancijom proizvođača * Greške i međuprodaja zadržani * Dostupno od oko 35. nedelje 2026.

Stanje: novo, največja dovoljena obremenitev: 13.490 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, TRA-Kombi 18.0: * 3-in-1 solution: suitable for roll-off containers, skip containers, and as a low-loader ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 t axles Pgsdpfx Aewb Rakjhtjn ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrical / Lighting: * Tire pressure monitoring system (TPMS), display capability in truck via EBS signal (no truck-side installation required) * LED rear lights 12/24 V * 15-pin power connector ----General Attachments: * Tool box made of powder-coated sheet steel * Spare wheel carrier (basket type) on the right side * Closed side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear impact protection buffers * Foldable A-sign at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel deck with recessed rollers in the bogie area * Can transport roll-off containers with a container length of 5,500 – 7,000 mm * Pneumatic 4-point clamp locking and mechanical plug-in stop angles at the front of the guide track * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * Includes 8 repositionable bin stops for lateral centering of the skips, front 4 stops plug-in with pivoting stop * Weld bead as anti-slip coating in the ramp area of the track * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for securing with tensioning elements, 4 cloverleaf-type lashing brackets per side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t recessed lashing eyes per side in the outer frame ----Ramps: * Aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Additional Information: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egstorf

Stanje: novo, največja dovoljena obremenitev: 13.410 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, prostornina tovornega prostora: 11 m³, Leto izdelave: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display capability in the truck dashboard via EBS signal (installation on the truck side not required) * 2 x 9 t Gigant axles * Air suspension with level control during tipping operation * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm using offset plate) * Jost landing gears at the front * Folding galvanized steel underrun protection for paver loading * Closed plastic single mudguards * Standing platform on the front wall * Manual sliding tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * 2 LED reversing lights * Chassis made of fine-grained steel * Steel three-way tipper body (side walls with MM profile - continuous without side posts - swinging with manual central locking and drop-down left side wall with board spring lifter) * Tarpaulin similar to RAL 7038 agate grey with side tension by ratchet straps and elastic cords at the front and rear * Front wall platform made of grating with step at drawbar and hand grip on the front wall * Rear wall – made of HBW 400 steel – swinging with automatic 2-claw lock * 5 mm steel floor made of HBW 450 steel * 4 x 3 t recessed and foldable lashing rings per side – integrated into steel floor * Reinforced and certified body according to EN 12642 XL including load securing certificate up to 19 t * Side wall paintwork in your desired RAL color (no special or metallic paintwork) – changeable up to approx. 6 weeks before completion * Axles, air tanks, landing gears, flange towing eye painted in black tone * Chassis, underrun guard and drawbar hot-dip galvanized Pgsdpfxoxl Nkgs Ahtsn * New vehicle with full manufacturer's warranty * Errors and prior sale reserved * Available from approx. week 44 / 2026

Stanje: rabljeno, lastna masa: 4.500 kg, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2015, naslednji pregled (TÜV): 07/2025, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 1.000 mm, barva: modra, Leto izdelave: 2015, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, * German trailer * Condition as shown in photos * Müller-Mitteltal three-way tipper, model KA-TA-R 18.0 tandem * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp * Air suspension * Disc brakes * Platform * Jost landing gear * Payload: 13,500 kg If a new TÜV inspection is required, we are happy to offer this through our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods, to avoid any misunderstandings regarding their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. Pgodpfx Ajwz H Nbshtjn All details are without guarantee. We do not assume liability for errors or incorrect information in the listing. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stanje: rabljeno, največja dovoljena obremenitev: 23.900 kg, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2007, Leto izdelave: 2007, Interna številka vozila: G400178 Na voljo takoj na naši lokaciji v Kaufungenu Več informacij: * Golec Nutzfahrzeuge GmbH (nemško, angleško, bolgarsko, rusko) Pgjdpozahg Djfx Ahton * Viktoria Sologubova (poljsko, rusko, ukrajinsko, angleško) Lastna teža: 7.100 kg Skupna dolžina: 10.800 mm Največja dovoljena masa: 31.000 kg Možne so napake pri vnosu podatkov Z veseljem vzamemo vaše rabljeno vozilo v račun. Financiranje možno neposredno pri nas. GOLEC NUTZFAHRZEUGE GMBH Govori se: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.

Stanje: rabljeno, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, skupna širina: 2.550 mm, Leto izdelave: 2023, Müller Mitteltal KA-TA-R 11.9 Tandem 3-Way Tipper with many extras. Gross weight: 11,900 kg. Standard payload approx.: 8,750 kg. Internal dimensions: 5,000 x 2,420 x 500 mm. Tyres: 385/55R19.5. 4-coat single-color paint. Wheels: silver. Chassis/underrun protection: hot-dip galvanized. Platform with front wall: hot-dip galvanized. Axles/springs/air reservoir, etc.: black. Side and rear wall: RAL 2011 deep orange. Reinforced and certified superstructure according to EN 12642 XL including load securing certificate (only in combination with 500 mm high steel side walls). Rear stanchions bolted, hot-dip galvanized, without topcoat. Lashing points LC 5,000 daN, recessed at the front. Mesh hooks integrated laterally and at the rear into the locks of the central locking for the base side wall, as well as an additional 2 pieces on the front wall. BPW axles instead of GIANT. Tipping platform with fixed-mounted front wall in hot-dip galvanized version, with bolted, galvanized rear stanchions, without additional coating (not on HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially on wide floor plates – warranty claims for this are excluded. Tyres 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940, ramp length 3,570 mm required). 1 piece plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg payload with evenly distributed load), mounted: on the chassis frame on the right in direction of travel. 1 pair of aluminium loading ramps without wheel channel (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg/piece. Two-step access in front of the front wall, left side in direction of travel (hot-dip galvanized). Connecting lines extended for agricultural and forestry towing vehicles. Podjvy Tvtopfx Ahtegn Further information New: No

Stanje: novo, največja dovoljena obremenitev: 8.770 kg, Leto izdelave: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with Many Extra Features Pedpsxcxmfefx Ahtogn Equipment: - 2 spring-assisted lifts for 400mm high steel side walls - Reinforced and certified superstructure according to EN 12642 XL load securing certificate - 10 UVV lashing hoops in the existing perforated pattern in the outer frame - Additional clamped wooden floor - 235/75R17.5 tyres - 4 BPW axles instead of GIGANT - Platform extension by 870 mm to a total of 6,270 mm - One-piece ramps with hot-dip galvanized anti-slip grating - Lockable toolbox with 45 kg load capacity Paintwork: - Wheels: silver - Chassis / front wall / drawbar / rear wall / stakes / ramps: hot-dip galvanized - Axles / springs: black - Side walls: RAL2011 deep orange We will be happy to offer you suitable financing, hire purchase, or leasing solutions. Delivery or shipping available by arrangement. We always have a selection of new equipment in stock and demo units available. Feel free to contact us! We rent vehicles with or without drivers, as well as machinery. A wide range of used machines and equipment always available. Subject to technical modifications, errors, and prior sale.

Stanje: rabljeno, največja dovoljena obremenitev: 10.080 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 08/2017, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, prostornina tovornega prostora: 6 m³, Leto izdelave: 2017, Oprema: ABS, Stock št. 5820 Müller-Mitteltal 3-stranski tandem jekleni kiper priklopnik / aluminijaste rampe / pocinkovano podvozje / široke pnevmatike! ---- * Proizvajalec: Müller-Mitteltal * Tip: KA-TA-R 13,5 * Prva registracija: 08/2017 * Skupna masa: 13.500 kg * Lastna masa po prometnem dovoljenju: 3.420 kg * Nosilnost: 10.080 kg Pgsdszdm S Sopfx Ahten * Osi: 2 x Gigant / bobnaste zavore * Vzmetenje: listnato vzmetenje * Pnevmatike: 385/55 R 19.5 približno 50% na jeklenih platiščih * Tehnični pregled: 08/2026 * EBS * Barva: podvozje pocinkano, kiper nadgradnja modra * Prostornina kiperske kadi: približno 6 m³ (5,00 m dolžina x 2,42 m širina x 0,50 m višina) * izvlečne aluminijaste rampe * vlečna kljuka s 50 mm ušesom, nastavljiva po višini * kiper nadgradnja s 4 pari zložljivih pritrdilnih ušes v tleh * nosilec za polno obremenitev spredaj * dodatne zložljive opore zadaj * predal za orodje iz nerjavnega jekla spredaj desno * četrtinski blatnik * certifikat za varovanje tovora * vozilo iz prve roke Nemški priklopnik!! Nemški dokumenti!! Prva lastništvo!! Opomba o morebitnih napakah v oglasu: Kljub skrbni pripravi oglasa lahko pride do posameznih napak v besedilu ali podatkih. Ne prevzemamo odgovornosti za napake, spremembe ali vmesno prodajo. Vse informacije so brez garancije. Prosimo, da nas kontaktirate za preverjanje podrobnosti ali dodatna vprašanja.

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform Trailer Available in week 37/2026, Inquiry No.: 31941 Delivery to your address possible * We are happy to provide you with an individual offer * ---- * GVW: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m platform with galvanized 400mm front wall * Hardwood excavator bucket rest screwed to the front wall * Unloaded deck height: 930 mm / loaded: 870 mm * One-piece ramps with hot-dip galvanized anti-slip grating, can be pushed together to approx. 20 mm, secured by retaining rods and inclined supports * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45° angled, perforated for lashing devices, lashing capacity per point LC 2000 daN with minimum spacing of 480 mm. Installation of drop lashing rings LC 3000 daN with approx. 600 mm spacing possible) with tight cross bracing, high-web front and rear end sections and access ramp at the rear, hot-dip galvanized * 10 recessed UVV lashing rings LC 3000 daN in the existing hole matrix in the outer frame, additionally * Further lashing options via drill holes (Ø 50 mm, LC 1200 daN) in the front and end beams Pgodpfozbfmqsx Ahtsn * Toolbox in front of the front wall * Side marker lights with indicator activation * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * Height-adjustable support winch at the front, foldable supports at the rear * 2 container locks recessed in the front crossmember * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable, 50 mm eye available upon request * 1 LED marker light removable at the rear ---- * Leasing, hire purchase, financing, trade-in possible * e.g. 525 Euro per month over 60 months with no down payment or final residual value ---- * Our business hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside of business hours available by appointment We speak German, English, Polish, French Leasing, financing, trade-in available

Stanje: rabljeno, največja dovoljena obremenitev: 7.950 kg, skupna masa: 11.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2010, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Skupna teža: 11.000 kg Lastna teža: 3.050 kg Nosilnost: 7.950 kg Skupna dolžina: 8.100 mm Nakladalna dolžina: skupno cca 6.000 mm Širina: 2.550 mm / nakladalna širina cca 2.470 mm Nakladalna višina: 900 mm Pedpex E I Utofx Ahtsgn Dodatne informacije - po višini nastavljiva vlečna ojnica - podporna noga - stranske stene 400 mm, vzmetene - električno kolo - BPW osi - rešetkaste klančine z vzmetjo, bočno pomične - plezalne letve, zadnja podpora - velik pritrdilni paket

Stanje: rabljeno, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 07/2017, naslednji pregled (TÜV): 05/2026, dolžina tovornega prostora: 6.250 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Dodatne informacije 400 mm zložljive stranske stranice - Dvižni mehanizem za stranice s vzmetjo - Snemljiva zadnja stena - Velik komplet za pritrjevanje tovora - Perforirana letva na tovornem prostoru - Sprednja podporna noga nastavljiva po višini - Zadnje podporne noge zložljive - Plastična orodjarna skrinja Pjdpfx Aey Hn D Rjhtsgn - BPW osi - Vzmetne rampe z rešetko

Stanje: rabljeno, največja dovoljena obremenitev: 7.100 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2007, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 1.100 mm, skupna širina: 2.550 mm, Vozilo / Nadgradnja: Tandem tri-stranski prekucnik Prva registracija: 07/07 Skupna masa: 10.000 kg Lastna masa: 2.900 kg Nosilnost: 7.100 kg Skupna dolžina: 6.900 mm Dolžina nakladalne površine: 5.000 mm Širina: 2.550 mm / širina nakladalne površine cca 2.450 mm Višina nakladanja: cca 1.100 mm Dodatne informacije Pedpsyz H Azjfx Ahtsgn - 40 km/h - 500 mm stranice - 500 mm pocinkovani sprednji nastavek - 7 parov pritrdilnih obročev na nakladalni površini - 4 pari pritrdilnih obročev pod zunanjim delom nadgradnje - Podporna noga - Zadnja opora - Dvižna vzmet za stranico - Nakladalne rampe opcijsko 1.280,00 €

Stanje: rabljeno, največja dovoljena obremenitev: 10.100 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 03/2001, naslednji pregled (TÜV): 11/2025, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.550 mm, Skupna teža: 13.500 kg Lastna teža: 3.400 kg Nosilnost: 10.100 kg Skupna dolžina: 8.100 mm Nakladalna dolžina: 6.000 mm Širina: skupna širina 2.550 mm / širina kesona 2.460 mm Višina nakladanja: ca. 1.000 mm Dodatne informacije - Pnevmatske gume: 285/70R19,5 - Stranske stene 400 mm, 1x deljene Pgsdpfow Nu I Tjx Ahton

Stanje: rabljeno, največja dovoljena obremenitev: 8.900 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 12/2011, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Dodatne informacije - Rampske površine z rešetko - Vzmetne rampe - Zložljive podporne noge - LED vzvratne luči - Vzmeti za stranske stene - BPW osi - Stranske stene 400 mm Pgsdpfjzb Ua Tsx Ahten - Uporabna dolžina 6.000 mm vklj. z zadnjim prislonom cca 1.100 mm

Stanje: rabljeno, največja dovoljena obremenitev: 30.100 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2000, dolžina tovornega prostora: 10.600 mm, širina tovornega prostora: 2.750 mm, skupna širina: 2.750 mm, Müller Mitteltal TT40 - remorque surbaissée : ---- * Constructeur : Müller Mitteltal * Modèle : TT40 * Première immatriculation : 02 / 2000 * PTAC : 40 000 kg * Poids à vide : 9 900 kg * Charge utile : 30 100 kg * 4 essieux * Dernier essieu autodirecteur * Contrôle technique à prévoir ! * Rampes hydrauliques * Les traverses bois dans le plateau surbaissé ont été remplacées * Contrôle technique à réaliser * Immatriculation allemande * Surface de chargement totale : env. 10,60 mètres * Largeur de chargement : env. 2,75 mètres * Longueur du plateau surbaissé : env. 4,50 mètres * Hauteur de chargement arrière : env. 0,9 mètres * Hauteur de chargement du plateau surbaissé : env. 0,65 mètres * Hauteur de chargement avant (col de cygne) : env. 1,05 mètres * Plus de photos sur demande (WhatsApp Erik) * Prix : 12 900 € HT + 19 % TVA ----Pour toute question, veuillez appeler : Pgjdezaylfopfx Ahton Erik Kortum : WhatsApp Toutes les informations sont données sans garantie, sous réserve d’erreurs ou de vente préalable.

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, PT 30 Profile: ----Braking System: * EBS (electronic braking system) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Drawbar: * Drawbar, 1,200 mm long, with 40 mm towing eye and height adjustment via traction spring & turnbuckle ----Electrical / Lighting: Podjxptn Rspfx Ahtogn * Smart-Board information system mounted on the trailer (for axle load indication – separate front and rear display) * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear ----General Attachments: * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board sets front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel mud skirts with spray protection * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Compartment in the bogie for accessories, with folding lid and 2 fixed container locks (directly behind the bogie platform) * 2 galvanized steps on the bogie, left and right ----Low Loader Platform: * Robot-welded non-slip overlay on the steel plate of the bogie platform (protruding weld seams) ----Load Securing (La-Si package consisting of): * 2 lashing eyes (13.4 t) front left & right on front bulkhead carrier * 1 pair of UVV lashing rings at front & rear (13.4 t) and 3 pairs of UVV lashing rings on each side (10 t), pivotable and lowerable, loadable in all directions, recessed in outer frame * 3 stake pockets on each side, each with 2 t lashing capacity * Profifix lashing rail in longitudinal axis, centered in flat area, for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear taper) * Widening planks stored in the centre of the loading platform ----Ramps: * Hydraulic one-piece drive-on ramps, approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way control block for future retrofit of hydraulic ramp lateral adjustment ----Excavator Arm Rest: * Excavator arm rest above rear axle, extending to the rear end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, located laterally in the main longitudinal frame ----Loading Height: * Loaded approx. 910 mm +/- 20 mm (air suspension) ----Paintwork: * Chassis, bogie, folding outriggers, drop-down supports and ramps hot-dip galvanized * Axles, slewing ring, air tanks, and drawbar painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS/EBS, approved for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalization unit with 100 mm wide parabolic springs ----Drawbar / Drawtube: * Fixed welded drawtube with low-maintenance ball joint for K80 ball coupling (offset by +77 mm / 33 mm via head plate), with raised bracket for connection lines ----Electrics / Lighting: * 12 V, 7 + 4 pin power supply * LED lighting system 12 / 24 V with protective grid * 2 LED work lights at the rear, switchable from towing vehicle without installation on towing side ----General attachments: Pgedpfx Ahor Dpzujtsn * Support winch at the front * Mechanical drop-down supports at the rear * Side marker lights with indicator activation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Hot-dip galvanized two-step access ladder in front of the front wall (on FR left) ----Chassis: * Fine-grain steel chassis ----Tipper body: * Steel Pal.- 3-way tipper body with M-Strong side panels (front wall fixed, continuous side panels - without center stanchions - swinging via manual central locking and mechanically foldable with sideboard spring assistor) * Hydraulic tailgate, 500 mm high, functioning as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load securing: * 1 x 7-tonne recessed and foldable lashing point in each corner * 4 x 3-tonne recessed and foldable lashing rings on each side ----Ramps: * 1 pair of aluminum drive-on ramps (10 t/pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receiving compartments for aluminum drive-on ramps, recessed from behind into the chassis * Load securing according to EN 12642 XL ----Coupling height: * Laden approx. 530 mm & unladen approx. 590 mm ----Paintwork: * Superstructure painted RAL 9010 pure white * Chassis, drawtube, rear supports, underrun protection hot-dip galvanized * Axles, air tank, support winch at the front * K80 coupling painted in black shade ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML Pgjdpjr Dpz Hofx Ahton ----Braking System: * Without ABS/EBS, homologated for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem-balance unit with 100 mm wide parabolic springs ----Drawbar Eye / Drawbar: * Rigid, welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm via mounting plate) with elevated gallows for connection lines ----Electrics / Lighting: * 12 V 7 + 4-pin power supply cable * LED lighting system, 12 / 24 V with protective grilles * 2 LED work lights at the rear, switchable from the towing vehicle, no vehicle-side installation required ----General Attachments: * Landing gear at the front * Mechanical drop legs at the rear * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right-hand side * Hot-dip galvanized two-step access steps in front of the bulkhead on the left (FR) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipper Body: * Steel pallet three-way tipper body with M-Strong side boards (fixed front wall, continuous sides without central stanchions, swinging via manual central locking, plus mechanically folding with board spring lifters) * Hydraulic tailgate, 500 mm high, engineered as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * Each corner equipped with 1 x 7 t recessed folding lashing ring * Each side fitted with 4 x 3 t recessed folding lashing points ----Ramps: * 1 pair aluminum loading ramps (10 t/pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber and tracked vehicles * 2 recessed storage compartments for aluminum ramps in the rear of the chassis * Load securing compliant with EN 12642 XL ----Coupling Height: * Loaded approx. 530 mm & unladen approx. 590 mm ----Paintwork: * Bodywork painted in RAL 9010 pure white * Chassis, drawbar, rear support legs, underrun protection hot-dip galvanized * Axles, air tanks, landing gear (front) * K80 coupling painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 09/1993, Leto izdelave: 1993, Oprema: ABS, = Additional options and equipment = Pgedpoxt Rw Rsfx Ahtjn - Electronic braking system (EBS) = Notes = Müller-Mitteltal low-bed trailer 2-axle low-loader ZSA Drive-on ramps IDNR 892 Transaction handling We look forward to advising you, signing contracts, or handing over the vehicle at our dealership. Please schedule an appointment. If you are unable to come to our dealership, we offer complete processing via telephone, email, WhatsApp, or fax. Upon request, we can deliver your new vehicle directly to your door. This provides you with the best price as well as maximum security and convenience during the transaction. We are happy to accept your used vehicle as a trade-in. We also offer the possibility of a digital vehicle appraisal using your vehicle pictures without the need to visit our dealership. Our specialized purchase team offers you a guaranteed top price. Upon request, we will deliver your new 'used' vehicle anywhere in Germany directly to your doorstep and collect your trade-in accordingly. Financing - Leasing Immediate approval and clearing of existing credit Your specialized partner for passenger cars, vans, commercial vehicles, and construction machinery ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (industrial area) Over 400 vehicles in stock at all times All details provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability or warranty for typographical or data transmission errors. Listed features may need to be checked separately by the buyer. The offer is generally without new TÜV inspection; we are happy to provide you an offer for this through our partner workshop. Subject to errors and prior sale. = Further information = Unladen weight: 4,600 kg Payload: 13,400 kg Gross vehicle weight: 18,000 kg Sales price: € 6,500, US$ 7,571

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display option in the truck via EBS signal - no truck-side installation required * Warning sign packages, front and rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics Psdpel Th Evofx Ahtsgn * Removable LED beacon at the rear * 24 V 15-pin as well as additional 12 V 7+4-pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design on right side * Enclosed single plastic mudguards at the front * Straight steel mud flaps at the rear each with splash protection (spray suppression) * Side underrun protection * Extended offset cranking by 500 mm forward * Kingpin platform extension by 520 mm with 45° angled corners and 3 recessed lockable storage compartments with lid * Chassis made from high-strength fine-grained steel * Flooring over turntable platform made of 50 mm and in low-bed platform made of 60 mm softwood * Outer boards of the drive-on ramps made of 50 mm bamboo wood * Four stake pockets per side (stakes not included) with integrated 2 t lashing point * Load securing package (Lasi package) including: 2 lashing eyes (6.4 t) front left/right on the main frame of the turntable platform; on both sides, front and rear, 1 pair of 13.4 t lashing rings on the outer frame, 4 pairs per side of 10 t swivel and drop lashing rings, loadable in all directions and integrated into the outer frame; 2 pairs of 6.4 t lashing rings per side in the excavator stick tray; 8 pairs of galvanized folding extensions for total width of 3 m (not at the rear angled section) * Side extension planks stored on the left in a compartment * Excavator stick rest above rear axle up to the end of approach slope, approx. 2,300 x 740 x 190 mm * Mechanical drop supports at rear * Hydraulic, hot-dip galvanized drive-on ramps approx. 3,000 x 720 mm * Hydraulic side ramp shifting on sliding tube from ramp axle * Loading area above kingpin: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach slope) * Chassis, kingpin platform, drive-on ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks, and kingpin painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up aid for maneuvering purposes on the 1st axle (operated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle by an additional switch in the tractor unit * Automatic lowering of the air suspension during tipping operation (can be deactivated via control unit in the driver's cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinder * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED tail lights 12 / 24 V with galvanized protective housing ----Drawbar / Flanged Towing Eye: * Drawbar with adjustable K80 ball hitch ----Coupling Height: * Coupling height approx. 440 - 550 mm when loaded, with raised tower for connection lines ----General attachments: Pgodpfxsy Tr Hij Ahton * Support winch at the front * Bolted steel underride guard * Plastic quarter mudguards in front of the first and behind the last axle * Removable protective grille for rear lights (not permitted under StVZO regulations and must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * 3-way tipper body made of steel (fixed front wall, continuous side walls - without center pillar -, right side wall swinging via central locking and foldable with drop side spring assist) * Left side wall foldable with drop side hydromatics * Rear wall swinging with automatic hook locking * 5 mm steel floor made of HARDOX-450 steel or equivalent ----Load securing: * On each side 4 x 3 t lashing rings recessed in the outer frame, UVV-compliant ----Paintwork: * Axles, air tank, support winch, flanged towing eye painted in a black tone * Tipper body painted in a customer-specified RAL color (no special or metallic paint), can be changed up to approx. 6 weeks before completion * Chassis, protective grille for rear lights, hot-dip galvanized ----Info: * Sample images ----Delivery time: * The vehicle is still under construction and, barring any delays, will be completed in calendar week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2026, KA-TA-R 21.0: Podpey Tr Hcjfx Ahtjgn ----Axles: * Gigant axles * Start assist system for maneuvering on the 1st axle (controlled via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor * Automatic lowering of the air suspension when tipping (can be deactivated via control element in cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for tractors with 12V & 24V electrics * LED tail lights 12/24 V with galvanized protection box ----Drawbar / Flange towing eye: * Drawbar with K80 ball coupling, adjustable mm ----Coupling height: * Coupling height approx. 440 - 550 mm when loaded with raised tower for connecting lines ----General attachments: * Support winch in front * Bolted steel underride guard * Plastic quarter mudguards in front of the first and behind the last axle * Removable tail light guard (not permitted under StVZO, must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grain steel ----Tipping body: * 3-way steel tipper body (fixed front wall, continuous side walls without center stanchions, right side wall swinging via central locking and foldable with side wall spring-assisted lift, left side wall foldable with hydraulic side wall system) * Tailgate swinging with automatic hook locking * 5 mm steel floor made from HARDOX-450 steel or equivalent ----Load securing: * Each side with 4 x 3 ton UVV lashing rings recessed in outer frame ----Painting: * Axles, air tanks, support winch, flange towing eye painted in black * Tipper body painted in a RAL color of your choice (no special or metallic colors, changeable up to approx. 6 weeks before completion) * Chassis, tail light guards hot-dip galvanized ----Information: * Sample images ----Delivery time: * Vehicle is still under construction and, assuming uninterrupted and steady production, will be completed in week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 8.770 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer / Ramps * NEW VEHICLE without first registration, * Now immediately available in RAL 7016 Anthracite, Enquiry number: 11653 * Gross weight: 11.9t, Payload: 8.77t * Reinforced and certified body according to EN 12642 XL, incl. load securing certificate * 6.27m x 2.47m x 0.4m steel side walls, laser-welded, drop-down with 2 spring assists * Front wall bolted, smooth sheet metal (hot-dip galvanized) * Rear wall: (hot-dip galvanized), stored in front of the ramps with empty holder behind front wall * Rear stakes bolted (hot-dip galvanized) * 50mm thick softwood floor * 4 UVV lashing rings LC 6300daN, recessed in front and rear cross members * 10 UVV lashing brackets LC 3000daN, recessed in the existing hole pattern in the external frame * Ramps: one-piece with hot-dip galvanized grating, non-slip version * Fixture in front of front wall for retrofitting container locks * Plastic toolbox in front of the front wall * Chassis and drawbar (hot-dip galvanized) * 235/75 R17.5 (4 wheels), parabolic suspension * BPW axles with tyre pressure monitoring * EBS, 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40mm tow eye * 2 LED reversing lights at the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with indicator function * 1 removable round LED warning beacon, including bracket and installation ---- * Trade-in possible * Financing available through our partners, with or without down payment/residual value, and various terms. Request a quote! ---- * Leasing example from our partner FM LeasingPartner: €485 per month net for 60 months, no down payment, zero final payment. Other terms with or without down payment/residual value possible. Ask us for a quote! We are an authorized MüllerMitteltal dealer! ---- * Our opening times: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside these hours we are available by appointment Psdpjyxbdbofx Ahtsgn * We speak German, English, Russian, Polish and French.

Stanje: rabljeno, največja dovoljena obremenitev: 31.820 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1980, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 3.000 mm, skupna širina: 2.550 mm, skupna višina: 900 mm, Leto izdelave: 1980, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal T4 Low Loader Trailer * SAF axles with drum brakes * Twin tyres * Low bed with extendable loading platform * Hydraulic loading ramps, movable (2 units) * Drive-over gooseneck * Additional rear supports * Turntable construction ----Dimensions & loading area * Loading area approx. 9,800 mm * Loading width: 2,550 - 3,000 mm * Loading height: 900 mm ----* Permissible total weight: 40,000 kg * Payload: 31,820 kg * Tyres: 235/75R17.5 ----Vehicle number: 11892----Subject to errors and prior sale----Advertising and various lettering have been digitally removed. -----We are happy to assist you with any formalities arising from the purchase of a vehicle. Simply let us know your requirements and suggestions, and we will take care of the rest. Among other things, we can offer you the following services at an additional cost: ----Trade-in of your old vehicle TÜV/general inspection Complete export processing Financing brokerage Obtaining export license plates Vehicle transport Pgedpfxjy Skl Ij Ahten Vehicle registration Recovery and vehicle transport ----Your VTS Team

Stanje: novo, največja dovoljena obremenitev: 13.490 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, TRA-Kombi 18.0: 3-in-1: Suitable for hooklift containers, skip containers, and as a low loader ----Brakes: * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 tonne axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), display on truck via EBS signal (no truck-side installation required) * LED rear lights 12/24V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated sheet steel * Spare wheel carrier basket, right side * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Folding A-board at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer rails to guide roll-off containers * Steel floor with roller recesses in the bogie area * For hooklift container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanical plug-in stop angles at the front of the track * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip locators for lateral centering of the skips, front 4 locators plug-in with swinging stop * Weld seam as anti-slip surface in the ramp area * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for hooking in securing elements for positive and non-positive locking of skips, 4 cloverleaf-type lashing bars per side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t lashing eyes per side flush-mounted in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t per pair), 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black Pgodpfxel Tld Io Ahtsn ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross weight technically up to 20,000 kg * New vehicle, never registered, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egstorf